calpeda mxs submersible pump

7/31/2019 Calpeda MXS Submersible Pump

1/4291

Multi-Stage Submersible Clean Water PumpsMXSMXS

Coverage chart n 2900 rpm

38

ConstructionClose coupled multi-stage submersible pumps in chrome-nickel

stainless steel.

Hydraulic part under the motor and motor cooled by the pumped

water for safe operation also with the pump only partially immersed.Double shaft seal with interposed oil chamber.

The suction strainer prevents the entrance of solids with diameter

bigger than: - 2,5 mm for MXS 203,4,5,6 - 404,5 - 803,4

- 2 mm for MXS 207,8,9,10 - 406,7,8,9,10 - 805,6,7,8,9.

ApplicationsFor water supply from wells, tanks or reservoirs.

For domestic use, for civil and industrial applications, for garden

use and irrigation. Utilization of rain water.

Operating conditionsWater temperature up to 35 C.

Minimum internal diameter of well: 132 mm.

Minimum immersion depth: 100 mm.Maximum immersion depth: 20 m (with suitable cable length).

Continuous duty.

Motor2-pole induction motor, 50 Hz.

MXS : three-phase 230 V 10%;

three-phase 400 V 10%.

MXSM: single-phase 230 V 10%, with thermal protector uo to 1,1 kW.

Control box with capacitor (and thermal device for 1,5 kW).

Float switch (on demand)

Cable: H07RN8-F, 4 G 1 mm2, length 15 m.

Insulation class F.

Protection IP 68 (for continuous immersion).

Double impregnation humidity-proof dry winding.Constructed in accordance with EN 60335-2-41.

Special features on request- Other voltages.- Frequency 60 Hz (as per 60 Hz data sheet).- Cable length 20 m.

MaterialsComponent Material

Delivery casing* Chrome-nickel steel 1.4301 EN 10088 (AISI 304)Nickel-plated Brass UNI-EN 12165-98**

External jacket - Suction strainer Chrome-nickel steel 1.4301 EN 10088 (AISI 304)Stage casing -Impeller Chrome-nickel steel 1.4301 EN 10088 (AISI 304)Oil chamber cover Chrome-nickel steel 1.4301 EN 10088 (AISI 304)Spacer sleeve -Motor jacket Chrome-nickel steel 1.4301 EN 10088 (AISI 304)

Shaft Chrome-nickel steel 1.4305 EN 10088 (AISI 303)Cr-Ni steel 1.4301 EN 10088 (AISI 304)**

Motor shield Brass P- Cu Zn 40 Pb 2 UNI 5705Cr-Ni steel 1.4301 EN 10088 (AISI 304)**

Upper mechanical seal Steatite, carbon, NBRLower mechanical seal Ceramic alumina, silicon carbide, NBR

Silicon carbide, Silicon carbide, NBR**Seal lubrication oil Oil for food machinery and pharmaceutic use

* Delivery casing and external jacket as one piece only for MXS 203,204,205,206,404,405,803,804**per MXS 207,208,209,210 - 406,407,408,409,410 - 805,806,807,808,809

MXS 4

MXS 2

0 120

0

2 4 6 8 10

72.986/1

50 100 150 200

20

30

40

50

90

100

110

120

70

80

50

100

150

ft

200

250

300

350

H

m

MXS 8

10

0 0

10 20 30 40

m /h3

l/minQ

Imp g.p.m.

0 2010 4030 50U.S. g.p.m.

01/2012


2/4

MXS 804

MXS 805

MXS 806

MXS 807

MXS 808

MXS 809

6,6

8,5

9

10,8

11,6

12,7

3,8

4,9

5,2

6,2

6,7

7,3

1,5

2,2

2,2

3

3

3

2

3

3

4

4

4

45,5

58

70

81,3

93

105

39

52,5

63

73,7

83,8

94,6

37

50,8

61,2

71,3

81,3

91,3

35

49,2

58,8

68,8

78,8

88,7

32,5

47,2

56,7

66,3

75,6

85

MXS 803 4,5 2,6 MXSM 803 25 1,55 1,1 1,5 34,5 29,5 28 26,5 24,5

A A kW kW HP 0 83,3 100 116 133

3 ~ 230 V 400 V 1 ~ P1 5 6 7 8

30

45

54,4

63,7

72,5

81,3

22,5

150

9

26,5

42,5

51,2

59,5

67,9

76,3

20

166,6

10

22,5

38,8

46,7

54,5

62,5

70

16,5

183,3

11P2 0Q

m /h

l/min

H m

3

7

A

230 V

450

V

MXS 206

MXS 207

MXS 208

MXS 209

MXS 210

3,8

4,3

4,7

5,2

5,7

2,2

2,45

2,7

3

3,3

MXSM 206

MXSM 207

MXSM 208

MXSM 209

MXSM 210

25

30

30

35

35

1,3

1,35

1,55

1,8

2

0,9

0,9

1,1

1,5

1,5

1,2

1,2

1,5

2

2

MXS 205 3,3 1,9 MXSM 205 20 1,1 0,75 1

MXS 204 2,7 1,6 MXSM 204 20 0,85 0,55 0,75

A A F kW kW HP 0 16,6 25 33,3 41,6 50 58,3 66,6 75

3 ~ 230 V 400 V 1 ~ P1 1 1,5 2 2,5 3 3,5 4,5P2 0 4Q

m /h

l/min

H m

3

6

6,6

7,2

9

9,7

5

4,1

A

230 V

450

450

450

450

450

450

450MXS 203 2,4 1,4 MXSM 203 20 0,8 0,55 0,753,5 450

V

3344

53

65

78

89

100

111

3141,5

49,5

61

73,3

83,8

94,4

105

29,539,5

47

58

70

80

90

100

27,536,5

44

54

65,8

75

85

94,2

2533,5

40

49

61,3

70

78,7

87,5

2229,5

35

43

55,3

63

71

79

1925,5

30

37

50

57,1

65,2

71,3

1621

25

30,5

42,5

48,8

55

61,3

1216

19

23

35,8

40,8

46,3

51,3

MXS 404

MXS 405

3,8

4,5

2,2

2,6

MXSM 404

MXSM 405

25

25

1,3

1,55

0,9

1,1

1,2

1,5

A A F

F

kW kW HP 0 41,6 50 58,3 66,6 75

3 ~ 230 V 400 V 1 ~ P1 2,5 3 3,5 4,5P2 0 4Q

m /h

l/min

H m

3

6

7

A

230 V

450

450

V

5 6 7 8

83,3 100 116 133

43

53

39

48

38

46,5

36,5

45

34,5

42,5

33

40

30,5

37,5

25,5

31

19,5

24

13

15

20,5

24

27,5

31

34,5

MXS 406

MXS 407

MXS 408

MXS 409

MXS 410

4,8

5,7

6,1

8,3

8,9

2,8

3,3

3,5

4,8

5,1

MXSM 406

MXSM 407

MXSM 408

30

35

35

1,65

1,95

2,2

1,1

1,5

1,5

2,2

2,2

1,5

2

2

3

3

7,6

9,5

10,5

450

450

450

67,5

78,8

90,3

101

113

61

71

81

91

101

58,8

69

79

88,5

98,5

57

66,5

76

85,5

95

55

64

73,5

82,5

92

53

61,5

70,5

79

88

50

58

66,5

75

83

43,5

50,5

57,5

65

72,5

34,5

40

46

52

57,5

102129

130

H H

ISO 228

G 1 1/4 ISO 228

G 1 1/4

13

3.9

3.0

07

MXSM 203 -MXSM 204 -MXSM 205 -

MXSM 206 -

MXSM 404 -MXSM 405 -MXSM 803

MXSM 207 -MXSM 208 -MXSM 406 -

MXSM 209 -MXSM 210 -MXSM 407 -MXSM 408 -

QM 11

QM 12

20 F

25 F

450 V

450 V

QM 13 30 F 450 V

QM 14 35 F 450 V

MXSM 203 CGMXSM 204 CGMXSM 205 CG

MXSM 206 CG



MXSM 209 CGMXSM 210 CGMXSM 407 CGMXSM 408 CG

1

MXS 203 - MXSM 203

MXS 204 - MXSM 204

MXS 205 - MXSM 205

MXS 206 - MXSM 206

MXS 207 - MXSM 207

MXS 208 - MXSM 208

MXS 209 - MXSM 209

MXS 210 - MXSM 210

MXS 404 - MXSM 404

MXS 405 - MXSM 405

MXS 406 - MXSM 406

MXS 407 - MXSM 407

MXS 408 - MXSM 408MXS 409

MXS 410

MXS 803 - MXSM 803

MXS 804

MXS 805

MXS 806

MXS 807

MXS 808

MXS 809

448

448

472

496

552

576

650

674

448

472

528

602

626650

674

472

472

614

644

674

704

734

mmH

12,9

13,1

13,6

14,9

19

19,5

21,5

22

14

14,5

18,5

20,5

2123,5

24

14,1

16,3

22

22,5

24,5

25

25,5

MXSkg

13,9

14,1

15,2

16,4

20

20,5

23,5

24

15,6

16

19,5

22,5

23

15,7

MXSM

14,2

14,4

15,5

16,7

20,3

20,8

23,8

24,3

15,9

16,3

19,8

22,8

23,3

16

MXSM .CG

- MXSM 203 CG

- MXSM 204 CG

- MXSM 205 CG

- MXSM 206 CG

- MXSM 207 CG

- MXSM 208 CG

- MXSM 209 CG

- MXSM 210 CG

- MXSM 404 CG

- MXSM 405 CG

- MXSM 406 CG

- MXSM 407 CG

- MXSM 408 CG

- MXSM 803 CG

1

2

1

2

2

1

2

kg 0,4

200

4.

93.1

19

75 76

M20x1,5

M20x1,5

Performance n 2900 rpm

Dimensions and weights

292

Weights with cable length: 15 m

Control box for single-phase pumps

Controlbox

Capacitor

P1 Max. power input. P2 Rated motor power output. Tolerances according to ISO 9906, annex A. Test results with clean cold water, without gas content.

Pump

With float switch pump(on demand)

Pump


Capacitor

Capacitor

Capacitor

Picture


3/4293

Characteristic curves n 2900 rpm

38


72.933

0 12

0

50

60

0

%

4 6 8 10

50 100 150 200

40

60

100

110

100

200

300

ft

H

m

MXS 8

20

30

50

70

90

10

2010 30 40

m /h3

l/minQ

0 124

2

2 6 8 10

Imp g.p.m.

803

804

805

806

807

808

809

3m /hQ

0 5

0

30

40

10

50

ft

0

20

30

40

50

60

70

80

90

100

110

120

H

m

%

1 2 3 4

20 40 60 80

5 10 15Imp g.p.m.

m /h3

l/minQ

100

150

200

250

300

350

206

207

208

209

210MXS 2 MXS 4

205

204

203

0 572.987.1 72.9881 2 3 43m /hQ

0 8

0

40

50

20

30

40

50

60

70

80

90

100

110

120

10

0

50

100

150

ft

200

250

300

350

%

2 4 6

50 100

10 20

m /h3

l/minQ

Imp g.p.m.

404

405

406

407

408

409

410

H

m

0 2 4 6 83m /hQ


4/4294

Features

3.93.111

Low Cost InstallationImmersed without suction pipe and valves. The cylindrical suction

strainer, with smaller diameter with respect to the pump, allows for

obstacle-free suction also from wells with the minimum diameter

of 132 mm or, with its robust stainless steel construction, for

supporting the pump when positioned on the flat surface of a tank

for operation with the minimum water level of 100 mm.

Greater SafetyWith submersed pumps protected against dry running and the

danger of freezing. No filling operations at start-up and no suction

problems. The double shaft sealing with an interposed oil chamber

separates the motor from the water and provides further protection

against accidental operation when dry.

Low-Noise Operation

The design of hydraulic parts, the water-filled shroud around the

motor and the submersed pump allow for low-noise operation.

Reliable and Environment FriendlyWith hydraulic parts in cold-pressed drawn stainless steel.

The only pump of its kind with no components in plastic material.

Installation examplePump in suspended position

Installation


Pump with float switch (on demand)

Max. 600 mm

0.5m

max20m

min

3.93.007/1

3.93.007/3

132 mmmin

3.93.007/2

calpeda mxs submersible pump

Documents