cam & groove couplings and accessories
TRANSCRIPT
MA
NU
FAC
TUR
ING
• Q
UA
LITY
• SE
RVIC
E • M
AN
UFA
CTU
RIN
G •
QU
ALI
TY •
SERV
ICE
• MA
NU
FAC
TUR
ING
• Q
UA
LITY
• SE
RVIC
E • M
AN
UFA
CTU
RIN
Cam & GrooveCouplings and
Accessories
dixonvalve.com • Customer Service: 877.963.4966
years of
The Right Connection
2 Dixon 877.963.4966 ♦ dixonvalve.com
General Information
Table of ContentsGeneral Information ...............................................................2-5 Crimp Fittings .......................................................................3 Cam and Groove General Information ..............................4-5Adapters ..................................................................................6-8 Type A Dixon / Boss-Lock.....................................................6 Type E Dixon / Boss-Lock ....................................................7 Type F Dixon / Boss-Lock ....................................................8Plugs ......................................................................................9Couplers ..............................................................................10-18 Type C Dixon ......................................................................10 Type C Boss-Lock ..............................................................11 Type C EZ Boss-Lock.........................................................12 Type D Dixon ......................................................................13 Type D Boss-Lock ..............................................................14 Type D EZ Boss-Lock.........................................................15 Type B Dixon ......................................................................16 Type B Boss-Lock ..............................................................17 Type B EZ Boss-Lock .........................................................18Dust Caps ............................................................................19-21 Type DC Dixon ...................................................................19 Type DC Boss-Lock............................................................20 Type DC EZ Boss-Lock ......................................................21Global Cam and Groove.....................................................22-25 Adapters Type A, E, F.................................................................22 Dust Plugs ..........................................................................23 Couplers Type B, C, D ................................................................23 Dust Caps...........................................................................24 Handle Assemblies .............................................................24 Spool Couplers Type DD, AA ................................................................25 Jump Size...........................................................................25Polypropylene .....................................................................26-28 Adapters .............................................................................26 Couplers .............................................................................27 Replacement Parts .............................................................28Cam and Groove Fittings ...................................................29-45 Swaged ..............................................................................29 Notched Ferrules .......................................................................29 Couplers ......................................................................30 Adapters ......................................................................30 Notched NOS Ferrules .......................................................................31 Couplers ......................................................................31 Adapters ......................................................................31
Cam and Groove Fittings (continued) ................................29-45 Tank Car Adapters ......................................................................32 Railroad Connections .............................................32-33 Elbows 45° ...............................................................................33 90° ...............................................................................33 Type A, D, E, C, F, B ..............................................34-35 Reducing Couplings Type A, D, E, C, F, B ..............................................35-36 Coupler x Adapter .......................................................37 Boss-Lock ...................................................................38 EZ Boss-Lock ..............................................................38 Lockable Dust Caps ...........................................................38 Dixon Spool Adapters ......................................................................39 Couplers ......................................................................39 Boss-Lock Spool Couplers .................................................39 Adapters and Couplers x 150# Flange ...............................40 Inline Sight Glass ...............................................................40 Specialty Items ...................................................................41 TTMA Flange Adapters.......................................................41 TTMA Flange Extensions ...................................................42 Adapter/Coupler x Round Tank Truck Flange ....................42 22½° Adapter/Coupler x Round Tank Truck Flange ...........42 Round Tank Truck Flange Gaskets ....................................42 Dixon Vapor Recovery Couplers ........................................43 Cam and Groove Welding Adapters ......................................................................44 Couplers .................................................................44-45Accessories ........................................................................46-48 Handle Assemblies ........................................................46-47 Pull Rings ...........................................................................47 Clips and Lanyards........................................................47-48 Chains ................................................................................48 Hand Swager with Cutter ...................................................48Gaskets ...............................................................................49-51 Cam and Groove ................................................................49 Fuel ....................................................................................49 PTFE ..................................................................................50 DImensions ........................................................................51 Color Codes .......................................................................51
3Dixon 877.963.4966 ♦ dixonvalve.com
General Information
Crimp Fittings
Only use the crimp style shanks with the crimp style sleeves and ferrules.Due to differences in dimensions and tolerances for safety reasons,
do not interchange other manufacturer's products with Dixon products.
Features:• sleeves and ferrules have a 50% larger range than the 'CF' series ferrules• The crimp range is stamped directly on the sleeves and ferrules to allow for easier and proper assembly.• allshankshaveamachinedfinish
Cam and Groove
Sizes:• 1"• 1½"• 2"• 3"• 4"• 6"
Materials:• aluminum• brass• stainless steel
Styles offered:• Dixon type C couplers• EZ Boss-Lock type C couplers• Dixon type E adapters • global type C couplers• global type E adapters
PleasecontactDixonat800.355.1991forspecificcrimprecommendations.
Sleeves and Ferrules
Styles offered:• sleeve• ferrule
Materials:• carbon steel• 304 stainless steel• aluminum (sleeves)
Sizes:• 1"• 1½"• 2"• 3"• 4"• 6"
Ranges:• 1-12/64" to 1-47/64"• 1-40/64" to 2-17/64"• 2-16/64" to 3-5/64"• 3-15/64" to 4-4/64"• 4-15/64" to 5-4/64"• 6-17/64" to 7-12/64"
4 Dixon 877.963.4966 ♦ dixonvalve.com
General Information
Specifications on Dixon Cam and Groove
Dixon Boss-Lock
1. Precision machined to rigid tolerances.2. Durable stainless steel cam arm pins will not rust or bind, for
greater strength and safety.3.Recessholdsgasketfirmlyinplace-ensuresproper
placement.4. Long shank design allows proper banding, thus eliminating the
major cause of hose damage.
Size represents the coupler or adapter and hose or pipe end. (i.e. 200 = 2") If the coupling is a reducing size, the coupler or adapteristhefirstsize.(i.e.4030-Cis4"couplerto3"hoseshank).
Operation of Cam and Groove
Pull Ring Safety Clips
1. To make connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
2. Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.
Boss-Lock cam and groove provides a unique patented safety feature. The cast-in lugs allow safety clips to be attached once the lugs are passed through slots in the special cam lever arms. These clips prevent the coupler from being unlocked until they are removed, providing a positive locking action.
Dixon has developed the pull ring safety clip to simplify the locking action on Boss-Lock couplers. No more inserting clips or dangling lanyards, just a twist and it's locked, giving you a lowprofilepositive locking action.
Buy with ConfidenceBoss-Lock investment stainless steel cam arms are guaranteed !
Should you ever break a Boss-Lock investment stainless steel cam arm,simply return it to the nearest warehouse for a free replacement.
Ordering System
size
material
style
RB200EZ200 - A - AL
Specifications:
Pressure Ratings:
• Dixon, Boss-Lock and EZ Boss-Lock cam and groove couplers and adapters are produced to interchange with all product produced to Commercial Item Description A-A-59326B.
• Nostandardexistsforthe½"and8"fittings,andgenerallythesesizesdonotinterchangewithothermanufacturers.• Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.• Designed for use with liquids,consultDixonforspecificrecommendations.
RecommendationsbasedontheuseofmatingDixonfittingsatambienttemperature(70°F) with standard Buna-N Seal installed. For use at elevated temperature or other unusual operating conditions, consult the factory. Dixon, Boss-Lock and EZ Boss-Lock couplers and adapters maximum working pressure are as follows:
Size ½" ¾" thru 2" 2½" 3" 4" 5" and 6" 8"PSI 150 250 150 125 100 75 50
1
23
4
5Dixon 877.963.4966 ♦ dixonvalve.com
General InformationCam and GrooveLine Drawings
EZ Boss-Lock
No more fumbling with clamps, wire, clips or pins.Just close the handles and the locking mechanism is engaged.
Unlike other safety couplings . . .• The EZ Boss-Lock is extremely easy to open!!! The release lever is under your thumb when you want to open thefitting.Ergonomic.
• The EZ Boss-Lock is resistant to accidental disconnection when being dragged. The release lever opens in the direction opposite to the cam arm, so movements that tend to open the release lever also tend to close the cam arm!!!
• The EZ Boss-Lock alerts you if it is not properly engaged. Iftherotatingleverisnotflushwiththehandle,itisnot
properly engaged.• The EZ Boss-Lock has no sliding pins to jam. The EZ Boss-Lock’s rotating action helps keep the locking
device free of debris.• The EZ Boss-Lock has no sliding pins to pop open. The EZ Boss-Lock is designed to protect critical parts from
impact and to withstand rugged use.• The EZ Boss-Lock can be supplied with special shanks
custom suited to your needs. The EZ Boss-Lock is available with swaged and PF shank designs for hard to couple chemical hoses.
• The EZ Boss-Lock cam arm assemblies are made of investment cast stainless steel with plated carbon steel pull rings.
• The EZ Boss-Lock is easier to insert into the hose tubes on tank trucks, and easier to use in restricted spaces.
This is due to the smaller maximum OD and a more snag free exterior.
• The EZ Boss-Lock cam arm assemblies can be retrofitted onto undamaged stainless steel Boss-Lock. This allows you to protect your investment in stainless steel Boss-Lock couplings while you upgrade.
• The EZ Boss-Lock is made in the USA.
Type Amale adapter x female NPT
Type Emale adapter x hose shank
Type Bfemale coupler x male NPT
Type Fmale adapter x male NPT
Type Cfemale coupler x hose shank
Type DC *dust cap
Type Dfemale coupler x female NPT
Type DP *dust plug
Warning !Under no circumstances should cam and groove
couplings be used for compressed air or steam service!
Line drawings are representative of the Dixon
line of cam and groove.
* Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
6 Dixon 877.963.4966 ♦ dixonvalve.com
Adapters
Dixon / Boss-Lock Type A Adapters
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size.2 made from 6061-T6 aluminum
male adapter x female NPTbrass
Size ½" ¾"x½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8" DIX 8" BLA overall length 1-11/16 1-11/16 1-5/8 2 2-3/16 2-3/16 2-5/8 2¾ 2¾ 3-1/8 3-3/8 3-3/8 4-13/16 4-7/16B adapter length 1-1/16 1-1/16 1-1/16 1-5/16 1-9/16 1-5/8 1-7/8 1-15/16 2 2-1/16 2¼ 2¼ 3-9/16 2¼ C distance across flats 1 1-5/16 1-3/8 1½ 2 2-9/32 2¾ 3¼ 3-7/8 5 7¾ 7¾ 10-5/8 10-5/8
3576T6 aluminum, brass and iron dimensions
Size ½" ¾" x½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"DIX
8"BL
A overall length 1-5/8 1-19/32 1½ 1-31/32 2-7/32 2-3/16 2-19/32 2-11/16 2-29/32 3-11/64 3¼ 3¼ --- ---B adapter length 1-1/16 1 1 1-5/16 1-9/16 1-5/8 1-7/8 1-15/16 2 2-1/16 2-5/16 2¼ --- ---C distance across flats 1 1-5/16 1-5/16 1½ 1-15/16 2-9/32 2-11/16 3¼ 3¾ 5 6-17/32 6¾ --- ---
316 stainless steel dimensions
Size356T6
AluminumPart #
AluminumHard Coat
Part #
BrassPart #
Unplated Iron
Part #
Plated IronPart #
316 SSPart #
½"¾" x½"
¾"1"
1¼"1½"2"
2½"3"4"5"6"
8" DIX8" BL
50-A-AL 2
7550-A-AL 2
75-A-AL 2
100-A-AL 2
125-A-AL150-A-AL200-A-AL250-A-AL300-A-AL400-A-AL500-A-AL600-A-AL800-A-AL 1
801-A-AL 1
---------------150-A-ALH200-A-ALH---300-A-ALH400-A-ALH---600-A-ALH------
50-A-BR7550-A-BR75-A-BR100-A-BR125-A-BR150-A-BR200-A-BR250-A-BR300-A-BR400-A-BR500-A-BR600-A-BR------
---------------150-A-MI200-A-MI---300-A-MI400-A-MI500-A-MI---------
------75-A-PM100-A-PM---150-A-PM200-A-PM---300-A-PM400-A-PM---600-A-PM------
50-A-SS7550-A-SS75-A-SS100-A-SS125-A-SS150-A-SS200-A-SS250-A-SS300-A-SS400-A-SS500-A-SS600-A-SS------
7Dixon 877.963.4966 ♦ dixonvalve.com
Adapters
Dixon / Boss-Lock Type E Adapters
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size.
Size356T6
AluminumPart #
AluminumHard Coat
Part #
BrassPart #
Unplated Iron
Part #
Plated IronPart #
316 SSPart #
½"¾" x½"
¾"1"
1¼"1½"2"
2½"3"4"5"6"
8" DIX8" BL
50-E-AL7550-E-AL75-E-AL100-E-AL125-E-AL150-E-AL200-E-AL250-E-AL300-E-AL400-E-AL500-E-AL600-E-AL800-E-AL 1
801-E-AL 1
---------------150-E-ALH200-E-ALH---300-E-ALH400-E-ALH---600-E-ALH------
50-E-BR---75-E-BR100-E-BR125-E-BR150-E-BR200-E-BR250-E-BR300-E-BR400-E-BR---600-E-BR------
---------------150-E-MI200-E-MI---300-E-MI400-E-MI------------
------75-E-PM100-E-PM125-E-PM150-E-PM200-E-PM---300-E-PM400-E-PM---600-E-PM------
50-E-SS7550-E-SS75-E-SS100-E-SS125-E-SS150-E-SS200-E-SS250-E-SS300-E-SS400-E-SS500-E-SS600-E-SS------
male adapter x hose shankbrass
Size ½" ¾" x½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"DIX
8"BL
A overall length 2½ 2¾ 3-15/16 4-5/8 4-7/8 5-1/16 6-1/32 6¼ 6-29/32 7-3/16 7-5/32 9-5/32 11-13/16 11¼ B hose shank length 1-7/16 1-5/16 2-3/8 2-15/16 2-13/16 2-29/32 3-3/8 3¾ 4-7/32 4¼ 4¼ 6-1/32 8 8 C hose shank OD 9/16 19/32 27/32 1-1/16 1-11/32 1-9/16 2-1/16 2-5/8 3-3/32 4-3/32 5-3/32 6-1/16 8-1/16 8-1/16
3576T6 aluminum, brass and iron dimensions
Size ½" ¾" x½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"DIX
8"BL
A overall length 2-7/16 2¾ 3-15/32 4-11/16 4-7/8 4-31/32 5¾ 6¼ 6-7/8 6-7/8 7 11/64 9-29/32 --- ---B hose shank length 1¾ 15/16 2-3/8 2-15/16 4-7/8 2-29/32 3-3/8 3¾ 4-3/16 4¼ 4¼ 6-3/32 --- ---C hose shank OD 9/16 19/32 1-5/16 1-1/16 1-11/32 1-9/16 2-1/16 2-5/8 3-3/32 4-3/32 5-3/32 6-1/16 --- ---
316 stainless steel dimensions
8 Dixon 877.963.4966 ♦ dixonvalve.com
Adapters
Dixon / Boss-Lock Type F Adapters
Size ½" ¾" x½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"DIX
8"BL
A overall length 2-1/8 2½ 2½ 2-7/8 2-15/16 3-5/32 3-17/32 4-7/16 4-1/8 4-21/32 4½ 5-17/32 6-7/8 6-3/8 B adapter length 1-1/16 1-1/16 1-1/16 1-5/16 1-9/16 1-5/8 1-7/8 1-15/16 2 2-1/16 2-5/16 2¼ 3-9/16 3-1/16C distance across flats 1 1-5/16 1-3/8 1½ 1-7/8 2¼ 2-11/16 3¼ 3¾ 5 6½ 8-1/32 10-23/32 10-23/32
3576T6 aluminum, brass and iron dimensions
Size ½" ¾" x½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"DIX
8"BL
A overall length 2-1/8 2½ 2-1/8 2-9/16 3-7/32 3-1/8 3-5/8 4-7/16 4-17/32 4-15/16 --- 4-15/16 --- ---B adapter length 1-1/16 1-1/16 1-1/16 1-5/16 1-9/16 1-5/8 1-7/8 1-15/16 2 2-1/16 --- 2¼ --- ---C distance across flats 1 1-5/16 1-5/16 1½ 1-15/16 2¼ 2-11/16 3¼ 3¾ 5 --- 7¾ --- ---
316 stainless steel dimensions
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size.
male adapter x male NPTbrass
Size356T6
AluminumPart #
AluminumHard Coat
Part #
BrassPart #
Unplated Iron
Part #
Plated IronPart #
316 SSPart #
½"¾" x½"
¾"1"
1¼"1½"2"
2½"3"4"5"6"
8" DIX8" BL
50-F-AL7550-F-AL75-F-AL100-F-AL125-F-AL150-F-AL200-F-AL250-F-AL300-F-AL400-F-AL500-F-AL600-F-AL800-F-AL 1
801-F-AL 1
---------------150-F-ALH200-F-ALH---300-F-ALH400-F-ALH---600-F-ALH------
50-F-BR7550-F-BR75-F-BR100-F-BR125-F-BR150-F-BR200-F-BR250-F-BR300-F-BR400-F-BR---600-F-BR------
---------------150-F-MI200-F-MI---300-F-MI400-F-MI------------
------75-F-PM100-F-PM---150-F-PM200-F-PM---300-F-PM400-F-PM---600-F-PM------
50-F-SS7550-F-SS75-F-SS100-F-SS125-F-SS150-F-SS200-F-SS250-F-SS300-F-SS400-F-SS---600-F-SS------
9Dixon 877.963.4966 ♦ dixonvalve.com
Plugs
Dixon / Boss-Lock Type DP Plugs
Size ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"DIX
8"BL
A overall length 1-7/16 1-23/32 1-15/16 2-3/8 2-13/32 2-7/8 2-7/8 2-13/16 3-1/16 3-3/8 3-1/16 5-3/16 4-11/16B adapter length 15/16 1-3/32 1-3/8 1-5/8 1-5/8 1-7/8 1-31/32 2 2-1/16 2-11/32 2-1/8 3-9/16 3-1/16C outside OD 15/16 1¼ 1-7/16 1-25/32 2-1/8 2½ 2-31/32 3-17/32 4-23/32 5-23/32 6-15/16 9-1/8 8-15/16
3576T6 aluminum, brass and iron dimensions
Size ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"DIX
8"BL
A overall length 1-7/16 1-11/16 1-15/16 2¼ 2½ 2¾ 2-7/8 2-27/32 3-1/8 --- 3½ --- ---B adapter length 15/16 1-1/16 1-3/8 1-9/16 1-5/8 1-7/8 1-7/8 2 2-1/16 --- 2¼ --- ---C outside OD 15/16 1¼ 1-7/16 1-25/32 2-1/8 2½ 2-31/32 3-17/32 4-23/32 --- 6-15/16 --- ---
316 stainless steel dimensions
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size.
Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
dust plugbrass
Size356T6
AluminumPart #
AluminumHard Coat
Part #
BrassPart #
Unplated Iron
Part #
Plated IronPart #
316 SSPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"
8" DIX8" BL
---75-DP-AL100-DP-AL125-DP-AL150-DP-AL200-DP-AL250-DP-AL300-DP-AL400-DP-AL500-DP-AL600-DP-AL800-DP-AL 1
801-DP-AL 1
------------150-DP-ALH200-DP-ALH---300-DP-ALH400-DP-ALH---600-DP-ALH------
50-DP-BR75-DP-BR100-DP-BR125-DP-BR150-DP-BR200-DP-BR---300-DP-BR400-DP-BR---600-DP-BR------
------------150-DP-MI200-DP-MI---300-DP-MI400-DP-MI------------
------100-DP-PM125-DP-PM150-DP-PM200-DP-PM250-DP-PM300-DP-PM400-DP-PM------------
50-DP-SS75-DP-SS100-DP-SS125-DP-SS150-DP-SS200-DP-SS250-DP-SS300-DP-SS400-DP-SS---600-DP-SS------
10 Dixon 877.963.4966 ♦ dixonvalve.com
Couplers
Dixon Type C Couplers
Size ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 2-5/8 3¾ 4½ 4-5/16 4-7/8 5-19/32 5½ 6-17/32 6-9/16 6-9/16 8-21/32 11-13/16B coupler length 1-3/16 1¼ 1-9/16 1-15/16 1-31/32 2-7/32 2-7/32 2-5/16 2-5/16 2-5/16 2-5/8 3-13/16C distance across closed cam arms 1-17/32 2-1/8 2-7/16 3-3/8 3-9/16 3-15/16 4-5/8 5-15/32 6-9/16 7-9/16 10-3/32 12-1/32D distance across open cam arms 2-5/8 4-5/16 5-3/16 7-7/16 7-5/8 8-1/32 8-9/16 10-3/32 11-3/16 12-3/16 16¼ 19-31/32E hose shank OD 19/32 27/32 1-1/16 1-11/32 1-9/16 2-1/16 2-5/8 3-3/32 4-3/32 5-3/32 6-1/16 8-3/32
3576T6 aluminum, brass and iron dimensions
Size ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 3-7/32 3-11/16 4½ 4-5/8 4-13/16 5-19/32 6-1/16 6-7/16 6-17/32 7-3/8 8-11/16 ---B adapter length 1-7/32 1¼ 1-9/16 1-29/32 1-29/32 2-7/32 2¼ 2¼ 2-9/32 2-7/16 2-19/32 ---C distance across closed cam arms 1-17/32 2-1/8 2-7/16 3¼ 3-9/16 3-15/16 4-7/16 5-15/32 5-15/32 7-9/16 10-3/32 ---D distance across open cam arms 2-5/8 4-5/16 5-3/16 7-5/32 7-7/16 7-13/16 8-11/32 9-15/16 11-1/32 12-1/32 16¼ ---E hose shank OD 19/32 27/32 1-1/16 1-11/32 1-9/16 2-1/16 2-5/8 3-3/32 4-3/32 5-3/32 6-1/16 ---
316 stainless steel dimensions
Size356T6
AluminumPart #
AluminumHard Coat
Part #
BrassPart #
Unplated IronPart #
316 SSPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"8"
50-C-AL75-C-AL100-C-AL125-C-AL 2
150-C-AL200-C-AL250-C-AL 2
300-C-AL400-C-AL500-C-AL600-C-AL800-C-AL 1
------------150-C-ALH200-C-ALH---300-C-ALH400-C-ALH---600-C-ALH---
50-C-BR75-C-BR100-C-BR125-C-BR 2
150-C-BR200-C-BR250-C-BR 2
300-C-BR400-C-BR---600-C-BR---
------------150-C-MI200-C-MI---300-C-MI400-C-MI---------
50-C-SS75-C-SS100-C-SS125-C-SS150-C-SS200-C-SS250-C-SS300-C-SS400-C-SS500-C-SS600-C-SS---
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size. The 8" Dixon design has 4 cam arms.2 Parts are manufactured in Canada.
female coupler x hose shankaluminum
11Dixon 877.963.4966 ♦ dixonvalve.com
Couplers
Boss-Lock Type C Couplers
Size356T6
AluminumPart #
BrassPart #
Unplated IronPart #
316 SSPart #
¾" x½"¾"1"
1¼"1½"2"
2½"3"4"6"8"
---AC075AC100AC125AC150AC200AC250AC300AC400AC600AC800 1
---BC075BC100BC125BC150BC200BC250BC300BC400BC600---
---IC075IC100---IC150IC200---IC300IC400IC600---
RC050BLRC075BLRC100BLRC125BLRC150BLNORC200BLNO---RC300BLRC400BLNO------
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size. The 8" Dixon design has 4 cam arms.
female coupler x hose shankaluminum
Size ¾" x ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 6" 8"A overall length --- 4-3/8 4-7/8 5-7/16 4-29/32 5-19/32 6-1/16 6-3/16 6½ 8-3/8 11-13/16B coupler length --- 1-13/32 1-17/32 1-29/32 1-31/32 2-7/32 2¼ 2¼ 2¼ 2-5/8 2-13/16C distance across safety lugs --- 2-19/32 2-29/32 3-5/8 3-29/32 4-5/16 4-13/16 5-9/16 6-11/16 9-5/8 11-5/8 D distance across open cam arms --- 5-13/32 5-9/16 7-15/32 7-25/32 8-5/32 8-21/32 9-29/32 11 16-5/32 18-5/32E hose shank OD --- 27/32 1-1/16 1-11/32 1-11/16 2-1/16 2-19/32 3-7/32 4-3/32 6-3/32 8-1/16
3576T6 aluminum, brass and iron dimensions
Size ¾" x ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 6" 8"A overall length 3-3/32 3-7/8 4-29/32 5-7/16 5½ 5-5/16 --- 6-15/32 7 --- ---B adapter length 1-5/8 1-9/32 1-9/16 1-29/32 1-29/32 2-3/16 --- 2-9/32 2-5/16 --- ---C distance across safety lugs 2-25/32 2-25/32 2-29/32 3-5/8 3-29/32 4-5/16 --- 5-9/16 6-11/16 --- ---D distance across open cam arms 5-13/32 5-13/32 5-9/16 7-15/32 7-25/32 8-5/32 --- 9-29/32 11 --- ---E hose shank OD 19/32 27/32 1-1/16 1-11/32 1-19/32 2-3/32 --- 3-3/32 4-3/32 --- ---
316 stainless steel dimensions
12 Dixon 877.963.4966 ♦ dixonvalve.com
Couplers
EZ Boss-Lock Type C Couplers
Size ¾" x ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 6" 8"A overall length --- 4-3/8 4-7/8 5-7/16 4-29/32 5-19/32 6-1/16 6-3/16 6½ 8-3/8 11-13/16B coupler length --- 1-13/32 1-17/32 1-29/32 1-31/32 2-7/32 2¼ 2¼ 2¼ 2-5/8 2-13/16C distance across closed cam arms --- 2-19/32 2-29/32 3-5/8 3-29/32 4-5/16 4-13/16 5-9/16 6-11/16 9-5/8 11-5/8 D distance across open cam arms --- 5-13/32 5-9/16 7-15/32 7-25/32 8-5/32 8-21/32 9-29/32 11 16-5/32 18-5/32E hose shank OD --- 27/32 1-1/16 1-11/32 1-11/16 2-1/16 2-19/32 3-3/32 4-3/32 6-3/32 8-1/16
3576T6 aluminum, brass and iron dimensions
316 stainless steel dimensions
Size356T6
AluminumPart #
BrassPart #
316 SSPart #
¾" x½"¾"1"
1¼"1½"2"
2½"3"4"6"8"
---AC075EZAC100EZ---AC150EZAC200EZAC250EZAC300EZAC400EZAC600EZAC800EZ 1
---BC075EZBC100EZBC125EZBC150EZBC200EZ---BC300EZBC400EZ------
RC050EZRC075EZRC100EZRC125EZRC150EZNORC200EZNO---RC300EZRC400EZRC600EZ---
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size. The 8" Dixon design has 4 cam arms
Size ¾" x ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 6" 8"A overall length 3-3/32 3-7/8 4½ 5-7/16 5-1/16 5-9/16 --- 6-15/32 6-9/16 8-11/16 ---B coupler length 1-5/8 1-9/32 1-9/16 1-29/32 2-5/32 2-3/16 --- 2-9/32 2-5/16 2-19/32 ---C distance across closed cam arms 2-25/32 2-25/32 2-29/32 3-5/8 3-29/32 4-5/16 --- 5-9/16 6-11/16 9-5/8 ---D distance across open cam arms 5-13/32 5-13/32 5-9/16 7-15/32 7-25/32 8-5/32 --- 9-29/32 11 16-5/32 ---E hose shank OD 19/32 27/32 1-1/16 1-11/32 1-9/16 2-1/16 --- 3-3/32 4-3/32 6-1/16 ---
female coupler x hose shankaluminum
13Dixon 877.963.4966 ♦ dixonvalve.com
Couplers
Dixon Type D Couplers
Size356T6
AluminumPart #
AluminumHard Coat
Part #
BrassPart #
Unplated IronPart #
316 SSPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"8"
50-D-AL75-D-AL100-D-AL125-D-AL 2
150-D-AL200-D-AL250-D-AL 2
300-D-AL400-D-AL500-D-AL600-D-AL800-D-AL 1
------------150-D-ALH200-D-ALH---300-D-ALH400-D-ALH---600-D-ALH---
50-D-BR75-D-BR100-D-BR125-D-BR 2
150-D-BR200-D-BR250-D-BR 2
300-D-BR400-D-BR500-D-BR600-D-BR---
------------150-D-MI200-D-MI---300-D-MI400-D-MI500-D-MI------
50-D-SS75-D-SS100-D-SS125-D-SS150-D-SS200-D-SS250-D-SS300-D-SS400-D-SS500-D-SS600-D-SS---
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size. The 8" Dixon design has 4 cam arms.2 Parts are manufactured in Canada.
female coupler x female NPTaluminum
Size ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 2 2-5/32 2-9/16 2-23/32 2-27/32 3-5/16 3-3/8 3-5/8 3-13/16 3¾ 4-11/32 5-27/32B coupler length 1-11/32 1¼ 1-9/16 1-13/16 1-13/16 2-7/32 2-11/32 2-5/16 2-5/16 2-5/16 2-5/8 3-13/16C distance across closed cam arms 1-17/32 2-1/8 2-7/16 3-3/8 3-9/16 3-15/16 4-5/8 5-15/32 6-9/16 7-9/16 10-3/32 12-1/32D distance across open cam arms 2-5/8 4-5/16 5-3/16 7-7/16 7-5/8 8-1/32 8-9/16 10-3/32 11-3/16 12-3/16 16¼ 19-31/32E distance across flats 1-1/16 1-9/32 1-19/32 2-1/32 2-3/16 2-5/8 3-7/32 3-7/8 4-7/8 6-9/16 * 7-21/32 * 10-1/16 *
3576T6 aluminum, brass and iron dimensions
Size ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 2 2-1/16 2½ 2-27/32 2-27/32 3-3/16 3¾ 3-19/32 3-11/16 3-13/16 4-1/16 ---B adapter length 1-7/32 1¼ 1-9/16 1-29/32 1-29/32 2-7/32 2¼ 2-9/32 2-9/32 2-5/16 2-19/32 ---C distance across closed cam arms 1-17/32 2-1/8 2-7/16 3¼ 3-9/16 3-15/16 4-7/16 5-15/32 5-15/32 7-9/16 10-3/32 ---D distance across open cam arms 2-5/8 4-5/16 5-3/16 7-5/32 7-7/16 7-13/16 8-11/32 9-15/16 11-1/32 12-1/32 16¼ ---E distance across flats 1-3/32 1-5/16 1-5/8 1-15/16 2-3/16 2-5/8 3-1/8 3¾ 4-7/8 6-7/16 * 7-9/16 * ---
316 stainless steel dimensions* distance across lugs
* distance across lugs
14 Dixon 877.963.4966 ♦ dixonvalve.com
Couplers
Boss-Lock Type D Couplers
Size356T6
AluminumPart #
BrassPart #
Plated IronPart #
316 SSPart #
¾" x½"¾"1"
1¼"1½"2"
2½"3"4"5"6"8"
AD050AD075AD100AD125AD150AD200AD250AD300AD400AD500AD600AD800 1
BD050BD075BD100BD125BD150BD200BD250BD300BD400---BD600---
---ID075ID100---ID150ID200---ID300ID400---ID600---
RD050BLRD075BLRD100BLRD125BLRD150BLRD200BL---RD300BLRD400BL---------
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size. The 8" Dixon design has 4 cam arms.
female coupler x female NPTaluminum
Size ¾" x ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 2 2-7/32 2-17/32 3-3/32 2-31/32 3¼ 3-11/16 3-7/8 3-13/16 3-15/16 4-5/8 4½ B coupler length 1-5/16 1-13/32 1-17/32 1-29/32 1-31/32 2-7/32 2¼ 2-5/16 2-5/16 2-5/16 2-5/8 2-13/16C distance across safety lugs 2-25/32 2-25/32 2-29/32 3-5/8 3-29/32 4-5/16 4-13/16 5-9/16 6-11/16 7-25/32 9-5/8 11-5/8 D distance across open cam arms 5-13/32 5-13/32 5-9/16 7-15/32 7-25/32 8-5/32 8-21/32 9-29/32 11 12-1/32 16-5/32 18-5/32E distance across flats 1-3/16 1-3/8 1-5/8 2 2¼ 2-5/8 3-5/16 3-7/8 4-7/8 6 * 8-5/32 11-5/8
3576T6 aluminum, brass and iron dimensions
Size ¾" x ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 2 2-1/8 2½ 3-3/32 2-27/32 3-3/16 --- 3-19/32 4¾ --- --- ---B adapter length 1-5/16 1-9/32 1-9/16 1-29/32 1-29/32 2-3/16 --- 2-9/32 2-11/32 --- --- ---C distance across safety lugs 2-25/32 2-25/32 2-29/32 3-5/8 3-29/32 4-5/16 --- 5-9/16 6-11/16 --- --- ---D distance across open cam arms 5-13/32 5-13/32 5-9/16 7-15/32 7-25/32 8-5/32 --- 9-29/32 11 --- --- ---E distance across flats 1-3/16 1-3/8 1-5/8 2 2-3/16 2-11/16 --- 3¾ 4-7/8 --- --- ---
316 stainless steel dimensions* distance across lugs
15Dixon 877.963.4966 ♦ dixonvalve.com
Couplers
EZ Boss-Lock Type D Couplers
Size356T6
AluminumPart #
BrassPart #
316 SSPart #
¾" x½"¾"1"
1¼"1½"2"
2½"3"4"5"6"8"
---AD075EZAD100EZ---AD150EZAD200EZAD250EZAD300EZAD400EZAD500EZAD600EZAD800EZ 1
---BD075EZBD100EZBD125EZBD150EZBD200EZBD250EZBD300EZBD400EZ---------
RD050EZRD075EZRD100EZRD125EZRD150EZRD200EZ---RD300EZRD400EZ---RD600EZ---
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size. The 8" Dixon design has 4 cam arms.
female coupler x female NPTaluminum
Size ¾" x ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length --- 2-7/32 2-17/32 3-3/32 2-31/32 3¼ 3-11/16 3-7/8 3-13/16 3-15/16 4-5/8 4½ B coupler length --- 1-13/32 1-17/32 1-29/32 1-31/32 2-7/32 2¼ 2-5/16 2-5/16 2-5/16 2-5/8 2-13/16C distance across closed cam arms --- 3-3/32 3¼ 3-29/32 4-7/32 4-19/32 5-3/32 5-23/32 6-27/32 7-7/8 10 12-1/32D distance across open cam arms --- 6-7/32 6-11/32 7-15/32 7-25/32 8-5/32 8-21/32 9-29/32 11 12-1/16 16-25/32 18-25/32E distance across flats --- 1-3/8 1-5/8 2 2¼ 2-5/8 3-5/16 3-7/8 4-7/8 6 * 8-5/32 11-5/8
3576T6 aluminum, brass and iron dimensions
Size ¾" x ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 2 2-1/8 2½ 3-3/32 2-27/32 3-3/16 --- 3-19/32 4¾ --- 4-1/16 ---B adapter length 1-5/16 1-9/32 1-9/16 1-29/32 1-29/32 2-3/16 --- 2-9/32 2-11/32 --- 2-19/32 ---C distance across closed cam arms 3-3/32 3-3/32 3¼ 3-29/32 4-7/32 4-19/32 --- 5-23/32 6-27/32 --- 10 ---D distance across open cam arms 6-7/32 6-7/32 6-11/32 7-15/32 7-25/32 8-5/32 --- 9-29/32 11 --- 16-25/32 ---E distance across flats 1-3/16 1-3/8 1-5/8 2 2-3/16 2-11/16 --- 3¾ 4-7/8 --- 7-19/32 ---
316 stainless steel dimensions* distance across lugs
16 Dixon 877.963.4966 ♦ dixonvalve.com
Couplers
Dixon Type B Couplers
Size356T6
AluminumPart #
Aluminum Hard Coat
Part #
BrassPart #
Unplated IronPart #
316 SSPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"8"
50-B-AL75-B-AL100-B-AL125-B-AL 2
150-B-AL200-B-AL250-B-AL 2
300-B-AL400-B-AL500-B-AL600-B-AL800-B-AL 1, 3
------------150-B-ALH200-B-ALH---300-B-ALH400-B-ALH---600-B-ALH---
50-B-BR75-B-BR100-B-BR---150-B-BR200-B-BR---300-B-BR400-B-BR---------
------------150-B-MI200-B-MI---300-B-MI400-B-MI---------
50-B-SS75-B-SS100-B-SS---150-B-SS200-B-SS250-B-SS300-B-SS400-B-SS---600-B-SS---
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size. The 8" Dixon design has 4 cam arms.2 Parts are manufactured in Canada. 3 Parts are produced as a welded fabrication.
female coupler x male NPTaluminum
Size ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 2 2-1/8 2-17/32 3-1/32 2-13/16 3¼ 3-9/16 3-15/16 4-1/32 4-3/16 4-7/16 8¼B coupler length 1-11/32 1¼ 1-5/8 1-15/16 1-29/32 2-7/32 2-5/32 2-5/16 2-11/32 2-5/16 2-5/8 3-13/16C distance across closed cam arms 1-17/32 2-1/8 2-7/16 3-3/8 3-9/16 3-15/16 4-5/8 5-15/32 6-9/16 7-9/16 10-3/32 12-1/32D distance across open cam arms 2-5/8 4-5/16 5-3/16 7-7/16 7-5/8 8-1/32 8-9/16 10-3/32 11-3/16 12-3/16 16¼ 19-31/32
3576T6 aluminum, brass and iron dimensions
Size ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 2-1/32 2-1/8 2-9/16 2-27/32 2-31/32 3-9/32 3-7/16 3-19/32 4 --- 4-17/32 ---B adapter length 1-7/32 1¼ 1-9/16 1-29/32 1-29/32 2-7/32 2¼ 2-3/8 2-9/32 --- 2-19/32 ---C distance across closed cam arms 1-17/32 2-1/8 2-7/16 3¼ 3-9/16 3-15/16 4-7/16 5-15/32 5-15/32 --- 10-3/32 ---D distance across open cam arms 2-5/8 4-5/16 5-3/16 7-5/32 7-7/16 7-13/16 8-11/32 9-15/16 11-1/32 --- 16¼ ---
316 stainless steel dimensions
17Dixon 877.963.4966 ♦ dixonvalve.com
Couplers
Boss-Lock Type B Couplers
Size356T6
AluminumPart #
BrassPart #
Plated IronPart #
316 SSPart #
¾" x½"¾"1"
1¼"1½"2"
2½"3"4"6"
------AB100AB125AB150AB200AB250AB300AB400AB600
BB050BB075BB100BB125BB150BB200BB250BB300BB400---
------IB100---IB150IB200---IB300IB400---
RB050BLRB075BLRB100BLRB125BLRB150BLRB200BL---RB300BLRB400BL---
female coupler x male NPTaluminum
Size ¾" x ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 2¼ 2-5/16 2-17/32 3-5/32 3-5/32 3-9/32 3-7/8 4 4-1/16 --- 4-23/32 7-1/8 B coupler length 1-5/16 1-13/32 1-17/32 1-29/32 1-29/32 2-7/32 2¼ 2-5/16 2-5/16 --- 2-19/32 2-13/16C distance across safety lugs 2-25/32 2-25/32 2-29/32 3-5/8 3-29/32 4-5/16 4-13/16 5-9/16 6-11/16 --- 9-5/8 11-5/8 D distance across open cam arms 5-13/32 5-13/32 5-9/16 7-15/32 7-25/32 8-5/32 8-21/32 9-29/32 11 --- 16-5/32 18-5/32
3576T6 aluminum, brass and iron dimensions
Size ¾" x ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 2¼ 2¼ 2-9/16 3-3/16 3-7/32 3¼ --- 3-15/16 4-1/16 --- --- ---B adapter length 1-5/16 1-5/16 1-9/16 1-29/32 1-29/32 2-3/16 --- 2-5/16 2-5/16 --- --- ---C distance across safety lugs 2-25/32 2-25/32 2-29/32 3-5/8 3-29/32 4-5/16 --- 5-9/16 6-11/16 --- --- ---D distance across open cam arms 5-13/32 5-13/32 5-9/16 7-15/32 7-25/32 8-5/32 --- 9-29/32 11 --- --- ---
316 stainless steel dimensions
18 Dixon 877.963.4966 ♦ dixonvalve.com
Couplers
EZ Boss-Lock Type B Couplers
Size356T6
AluminumPart #
BrassPart #
316 SSPart #
¾" x½"¾"1"
1¼"1½"2"3"4"6"
------AB100EZ---AB150EZAB200EZAB300EZAB400EZ---
---BB075EZBB100EZBB125EZBB150EZBB200EZBB300EZBB400EZ---
RB050EZRB075EZRB100EZRB125EZRB150EZRB200EZRB300EZRB400EZRB600EZ
female coupler x male NPTaluminum
Size ¾" x ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length --- 2-5/16 2-17/32 3-5/32 3-5/32 3-9/32 --- 4 4-1/16 --- 4-23/32 ---B coupler length --- 1-13/32 1-17/32 1-29/32 1-29/32 2-7/32 --- 2-5/16 2-5/16 --- 2-19/32 ---C distance across closed cam arms --- 3-3/32 3¼ 3-29/32 4-7/32 4-19/32 --- 5-23/32 6-27/32 --- 10 ---D distance across open cam arms --- 6-7/32 6-11/32 7-15/32 7-25/32 8-5/32 --- 9-29/32 11 --- 16-25/32 ---
3576T6 aluminum, brass and iron dimensions
Size ¾" x ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 2¼ 2¼ 2-9/16 3-3/16 3-7/32 3¼ --- 3-15/16 4-1/16 --- 4-17/32 ---B adapter length 1-5/16 1-5/16 1-9/16 1-29/32 1-29/32 2-3/16 --- 2-5/16 2-5/16 --- 2-19/32 ---C distance across closed cam arms 3-3/32 3-3/32 3¼ 3-29/32 4-7/32 4-19/32 --- 5-23/32 6-27/32 --- 10 ---D distance across open cam arms 6-7/32 6-7/32 6-11/32 7-15/32 7-25/32 8-5/32 --- 9-29/32 11 --- 16-25/32 ---
316 stainless steel dimensions
19Dixon 877.963.4966 ♦ dixonvalve.com
Dust Caps
Dixon Type DC Dust Caps
Size356T6
AluminumPart #
AluminumHard Coat
Part #
BrassPart #
Unplated IronPart #
316 SSPart #
½"¾"1"
1½"2"
2½"3"4"5"6"8"
50-DC-AL75-DC-AL100-DC-AL150-DC-AL200-DC-AL250-DC-AL 2
300-DC-AL400-DC-AL500-DC-AL600-DC-AL800-DC-AL 1
---------150-DC-ALH200-DC-ALH---300-DC-ALH400-DC-ALH---600-DC-ALH---
50-DC-BR75-DC-BR100-DC-BR150-DC-BR200-DC-BR---300-DC-BR400-DC-BR500-DC-BR------
------------200-DC-MI---300-DC-MI400-DC-MI---------
50-DC-SS75-DC-SS100-DC-SS150-DC-SS200-DC-SS250-DC-SS300-DC-SS400-DC-SS500-DC-SS600-DC-SS---
type DC dust capaluminum
Size ½" ¾" 1" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 4-29/32 2-1/16 2-11/32 2-11/16 3 2-5/8 3-1/8 3-21/32 3½ 3-3/16 5 4/9B coupler length 1-7/32 1-3/8 1-21/32 1-13/16 2-7/32 2-5/32 2¼ 2-5/16 2-5/16 2-5/8 3-13/16C distance across closed cam arms 1-17/32 2-1/8 2-7/16 3-9/16 3-15/16 4-5/8 5-15/32 6-9/16 7-9/16 10-3/32 12-1/32D distance across open cam arms 2-5/8 4-5/16 5-3/16 7-5/8 8-1/32 8-9/16 10-3/32 11-3/16 12-3/16 16¼ 19-31/32
3576T6 aluminum, brass and iron dimensions
Size ½" ¾" 1" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 1-23/32 1¾ 2-3/16 2-13/16 3-3/32 3-1/16 3-1/8 3-17/32 3-3/8 3¾ ---B adapter length 1-7/32 1¼ 1-9/16 1-29/32 2-7/32 2¼ 2-9/32 2-9/32 2-7/16 2-19/32 ---C distance across closed cam arms 1-17/32 2-1/8 2-7/16 3-9/16 3-15/16 4-7/16 5-15/32 5-15/32 7-9/16 10-3/32 ---D distance across open cam arms 2-5/8 4-5/16 5-3/16 7-7/16 7-13/16 8-11/32 9-15/16 11-1/32 12-3/16 16¼ ---
316 stainless steel dimensions
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size. The 8" Dixon dust cap has 2 cam arms.2 Parts are manufactured in Canada.Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
20 Dixon 877.963.4966 ♦ dixonvalve.com
Dust Caps
Boss-Lock Type H Dust Caps
Size356T6
AluminumPart #
BrassPart #
Plated IronPart #
316 SSPart #
¾"1"
1¼"1½"2"
2½"3"4"6"8"
---AH100AH125AH150AH200AH250AH300AH400AH600AH800 1
---BH100BH125BH150BH200BH250BH300BH400BH600---
---------IH150IH200---IH300IH400IH600---
RH075BLRH100BLRH125BLRH150BLRH200BL---RH300BLRH400BL------
Size ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length --- 2-7/32 2¾ 2-15/16 3-1/16 3-7/32 3-1/8 3-3/8 --- 3-29/32 4-9/16B coupler length --- 1-9/16 1-29/32 1-29/32 2-3/16 2¼ 2-5/16 2-5/16 --- 2-5/8 2-13/16C distance across safety lugs --- 2-29/32 3-5/8 3-29/32 4-5/16 4-13/16 5-9/16 6-11/16 --- 9-5/8 11-5/8 D distance across open cam arms --- 5-9/16 7-15/32 7-25/32 8-5/32 8-21/32 9-29/32 11 --- 16-5/32 18-5/32
3576T6 aluminum, brass and iron dimensions
Size ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 1-15/16 2-3/16 2¾ 2-13/16 3-1/16 --- 3-1/8 3-19/32 --- --- ---B adapter length 1-5/16 1-9/16 1-29/32 1-29/32 2-3/16 --- 2-9/32 2-5/16 --- --- ---C distance across safety lugs 2-25/32 2-29/32 3-5/8 3-29/32 4-5/16 --- 5-9/16 6-11/16 --- --- ---D distance across open cam arms 5-13/32 5-9/16 7-15/32 7-25/32 8-5/32 --- 9-29/32 11 --- --- ---
316 stainless steel dimensions
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size. The 8" Boss-Lock design has 2 cam arms.Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
type H dust capaluminum
21Dixon 877.963.4966 ♦ dixonvalve.com
Dust Caps
EZ Boss-Lock Type H Dust Caps
Size356T6
AluminumPart #
BrassPart #
316 SSPart #
¾"1"
1¼"1½"2"
2½"3"4"6"
---AH100EZ---AH150EZAH200EZAH250EZAH300EZAH400EZAH600EZ
---BH100EZ---BH150EZBH200EZ---BH300EZ------
RH075EZRH100EZRH125EZRH150EZRH200EZ---RH300EZRH400EZRH600EZ
Size ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length --- 2-7/32 --- 2-15/16 3-1/16 3-7/32 3-1/8 3-3/8 --- 3-29/32 4-9/16B coupler length --- 1-9/16 --- 1-29/32 2-3/16 2¼ 2-5/16 2-5/16 --- 2-5/8 2-13/16C distance across closed cam arms --- 3¼ --- 4-7/32 4-19/32 --- 5-23/32 6-27/32 --- 10 12-1/32D distance across open cam arms --- 6-11/32 --- 7-25/32 8-5/32 --- 9-29/32 11 --- 16-25/32 18-25/32
3576T6 aluminum, brass and iron dimensions
Size ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8"A overall length 1-15/16 2-3/16 2¾ 2-13/16 3-1/16 --- 3-1/8 3-19/32 --- 3¾ ---B adapter length 1-5/16 1-9/16 1-29/32 1-29/32 2-3/16 --- 2-9/32 2-5/16 --- 2-19/32 ---C distance across closed cam arms 3-3/32 3¼ 3-29/32 4-7/32 4-19/32 --- 5-23/32 6-27/32 --- 10 ---D distance across open cam arms 6-7/32 6-11/32 7-15/32 7-25/32 8-5/32 --- 9-29/32 11 --- 16-25/32 ---
316 stainless steel dimensions
Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
type H dust capaluminum
22 Dixon 877.963.4966 ♦ dixonvalve.com
Global Cam and Groove
• Pressure rating for adapters, is based on the seal of the mating part.
• Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons
Global Cam and Groove
Size A380 AluminumPart #
ASTMC38000 Forged BrassPart #
316 Investment Cast SSPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"8"
G50-A-ALG75-A-ALG100-A-ALG125-A-ALG150-A-ALG200-A-ALG250-A-ALG300-A-ALG400-A-ALG500-A-ALG600-A-ALG800-A-AL
G50-A-BRG75-A-BRG100-A-BRG125-A-BRG150-A-BRG200-A-BRG250-A-BRG300-A-BRG400-A-BR---------
---G75-A-SSG100-A-SSG125-A-SSG150-A-SSG200-A-SSG250-A-SSG300-A-SSG400-A-SS---G600-A-SS---
• designed to interchange with all products produced to A-A-59326B
• madetoDixonspecificationsandbrandedDixon• Buna seals are standard in all couplers
Global Type A Adapters
female NPT x male adapterstainless steel
Size A380 AluminumPart #
ASTMC38000 Forged BrassPart #
316 Investment Cast SSPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"8"
G50-E-ALG75-E-ALG100-E-ALG125-E-ALG150-E-ALG200-E-ALG250-E-ALG300-E-ALG400-E-ALG500-E-ALG600-E-ALG800-E-AL
G50-E-BRG75-E-BRG100-E-BRG125-E-BRG150-E-BRG200-E-BRG250-E-BRG300-E-BRG400-E-BR---------
---G75-E-SSG100-E-SSG125-E-SSG150-E-SSG200-E-SSG250-E-SSG300-E-SSG400-E-SS---G600-E-SS---
Global Type E Adapters
hose shank x male adapterstainless steel
Global Type F Adapters
Size A380 AluminumPart #
ASTMC38000 Forged BrassPart #
316 Investment Cast SSPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"
G50-F-ALG75-F-ALG100-F-ALG125-F-ALG150-F-ALG200-F-ALG250-F-ALG300-F-ALG400-F-ALG500-F-ALG600-F-AL
G50-F-BRG75-F-BRG100-F-BRG125-F-BRG150-F-BRG200-F-BRG250-F-BRG300-F-BRG400-F-BR------
---G75-F-SSG100-F-SSG125-F-SSG150-F-SSG200-F-SSG250-F-SSG300-F-SSG400-F-SS---G600-F-SS
male NPT x male adapteraluminum
23Dixon 877.963.4966 ♦ dixonvalve.com
Global Cam and Groove
Size A380 AluminumPart #
ASTMC38000 Forged BrassPart #
316 Investment Cast SSPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"
G50-DP-ALG75-DP-ALG100-DP-ALG125-DP-ALG150-DP-ALG200-DP-ALG250-DP-ALG300-DP-ALG400-DP-ALG500-DP-ALG600-DP-AL
G50-DP-BRG75-DP-BRG100-DP-BRG125-DP-BRG150-DP-BRG200-DP-BRG250-DP-BRG300-DP-BRG400-DP-BR------
---G75-DP-SSG100-DP-SSG125-DP-SSG150-DP-SSG200-DP-SSG250-DP-SSG300-DP-SSG400-DP-SS---G600-DP-SS
Global Type DP Dust Plugs
dust plugaluminum
Global Type B Couplers
Size A380 AluminumPart #
ASTMC38000 Forged BrassPart #
316 Investment Cast SSPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"
G50-B-ALG75-B-ALG100-B-ALG125-B-ALG150-B-ALG200-B-ALG250-B-ALG300-B-ALG400-B-ALG500-B-ALG600-B-AL
G50-B-BRG75-B-BRG100-B-BRG125-B-BRG150-B-BRG200-B-BRG250-B-BRG300-B-BRG400-B-BR------
---G75-B-SSG100-B-SSG125-B-SSG150-B-SSG200-B-SSG250-B-SSG300-B-SSG400-B-SS---G600-B-SS
female coupler x male NPTaluminum
Global Type C Couplers
Size A380 AluminumPart #
ASTMC38000 Forged BrassPart #
316 Investment Cast SSPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"8"
G50-C-ALG75-C-ALG100-C-ALG125-C-ALG150-C-ALG200-C-ALG250-C-ALG300-C-ALG400-C-ALG500-C-ALG600-C-ALG800-C-AL
G50-C-BRG75-C-BRG100-C-BRG125-C-BRG150-C-BRG200-C-BRG250-C-BRG300-C-BRG400-C-BR---------
---G75-C-SSG100-C-SSG125-C-SSG150-C-SSG200-C-SSG250-C-SSG300-C-SSG400-C-SS---G600-C-SS--- female coupler x hose shank
aluminum
24 Dixon 877.963.4966 ♦ dixonvalve.com
Global Cam and Groove
Global Type D Couplers
Size A380 AluminumPart #
ASTMC38000 Forged BrassPart #
316 Investment Cast SSPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"
G50-D-ALG75-D-ALG100-D-ALG125-D-ALG150-D-ALG200-D-ALG250-D-ALG300-D-ALG400-D-ALG500-D-ALG600-D-AL
G50-D-BRG75-D-BRG100-D-BRG125-D-BRG150-D-BRG200-D-BRG250-D-BRG300-D-BRG400-D-BR------
---G75-D-SSG100-D-SSG125-D-SSG150-D-SSG200-D-SSG250-D-SSG300-D-SSG400-D-SS---G600-D-SS
female coupler x female NPTaluminum
Global Type DC Dust Caps
Size A380 AluminumPart #
ASTMC38000 Forged BrassPart #
316 Investment Cast SSPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"
G50-DC-ALG75-DC-ALG100-DC-ALG125-DC-ALG150-DC-ALG200-DC-ALG250-DC-ALG300-DC-ALG400-DC-ALG500-DC-ALG600-DC-AL
G50-DC-BRG75-DC-BRG100-DC-BRG125-DC-BRG150-DC-BRG200-DC-BRG250-DC-BRG300-DC-BRG400-DC-BR------
---G75-DC-SSG100-DC-SSG125-DC-SSG150-DC-SSG200-DC-SSG250-DC-SSG300-DC-SSG400-DC-SS---G600-DC-SS
dust capaluminum
Replacement Handle Assemblies for Global Couplers
For Aluminum and Brass Global Couplers
Fits on sizes
Investment StainlessPart #
¾"1"
G75HRPG100HRP
• Handles supplied complete with ring and pin.
forged brassinvestment stainlessFits on sizes
Investment StainlessPart #
¾"1"
1¼" - 2½"3" and 4"
6"
G75HRPSSG100HRPSSG125250HRPSSG300400HRPSSG600HRPSS
investment stainless
For Stainless Steel Global Couplers
Safety Clip for Global Couplers
Zinc Plated Carbon SteelPart #
GSAFETYCLIP
Fits on sizes
Forged BrassPart #
1¼" - 2½"3" and 4"6" and 8"
G152HRPG34HRPG600HRP
25Dixon 877.963.4966 ♦ dixonvalve.com
Global Cam and Groove
Global Type DD Spool Couplers
Size AluminumPart #
2"3"
G200-DD-ALG300-DD-AL
Global Type AA Spool Couplers
Size A380 Aluminum Permanent MoldPart #
1"1½"2"3"4"
G100-AA-ALG150-AA-ALG200-AA-ALG300-AA-ALG400-AA-AL
Global Jump Size Cam and Groove
Size AluminumPart #
3" x 2"4" x 3"
G3020-A-ALG4030-A-AL
male adapter x female NPT
Size AluminumPart #
1½" x 2"2" x 3"3" x 4"
G1520-AA-ALG2030-AA-ALG3040-AA-AL
male spool adapter
Size AluminumPart #
3" x 2" G3020-C-AL
female coupler x hose shank
Size AluminumPart #
3" x 2"4" x 3"
G3020-DA-ALG4030-DA-AL
female coupler x male adapter
Size AluminumPart #
3" x 2" G3020-E-AL
male adapter x hose shank
G3020-E-AL
G3020-C-AL
G3020-DA-AL
G300-AA-AL
G300-DD-AL
26 Dixon 877.963.4966 ♦ dixonvalve.com
Polypropylene
Polypropylene Adapters
Size PolypropylenePart #
OptQty
¾" x½"¾"1"
1½" x 1¼"1½"2"3"4"
PPA50PPA75PPA100PPA125PPA150PPA200PPA300PPA400
242424242424248
type A
• Recommended for a maximum working pressure of 125 PSI (½" - 1"), 100 PSI (1¼" - 2") and 75 PSI (3" - 4"); recommendationsbasedontheuseofmatingDixonfittingsatanambienttemperatureof70°F with standard seal installed.• ½" couplers and adapters will interchange with¾" couplers and adapters. Only the threads and barbs are½". 1¼" couplers and adapters will interchange with 1½" couplers and adapters. Only the threads and barbs are 1¼".• Polypropylenecamandgrooveshouldnotbemixedwithmetalfittings.• Adaptersaremanufacturedfromaglass-filledpolypropylene.
NOT recommended for use with PTFE gaskets
type F
type E type P 1
Size PolypropylenePart #
OptQty
¾" x½"¾"1"
1½" x 1¼"1½"2"3"4"
PPF50PPF75PPF100PPF125PPF150PPF200PPF300PPF400
242424242424248
Size PolypropylenePart #
OptQty
¾" x½"¾"1"
1½" x 1¼"1½"2"3"4"
PPE50PPE75PPE100PPE125PPE150PPE200PPE300PPE400
242424242424248
Size PolypropylenePart #
OptQty
¾"1"
1½"2"3"4"
PPP75PPP100PPP150PPP200PPP300PPP400 2
24242424248
male adapter x female NPT male adapter x male NPT
male adapter x hose shank
dust plug
4" plug has a different design 2
Polypropylene Adapter Elbows
• Recommended for a maximum working pressure of 100 PSI(1½"-2");recommendationsbasedontheuseofmatingDixonfittingsat an ambient temperature of 70°F with standard seal installed.
• Adapterelbowsaremanufacturedfromaglass-filledpolypropylene.• For use at elevated temperatures or other unusual operating conditions, consult factory.
90° Elbow x FNPT
Size PolypropylenePart #
OptQty
1½"2"
90PPA15090PPA200
2424
90° Elbow x MNPT
Size PolypropylenePart #
OptQty
1½"2"
90PPF15090PPF200
2424
male adapter x female NPT male adapter x male NPT
1 Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
27Dixon 877.963.4966 ♦ dixonvalve.com
Polypropylene
Polypropylene CouplersNOT recommended for use with PTFE gaskets
• Recommended for a maximum working pressure of 125 PSI (½" - 1"), 100 PSI (1¼" - 2") and 75 PSI (3" - 4"); recommendationsbasedontheuseofmatingDixonfittingsatanambienttemperatureof70°F with standard seal installed.• ½" couplers and adapters will interchange with¾" couplers and adapters. Only the threads and barbs are½". 1¼" couplers and adapters will interchange with 1½" couplers and adapters. Only the threads and barbs are 1¼".• Polypropylenecamandgrooveshouldnotbemixedwithmetalfittings.• supplied with EPDM gaskets, 304 stainless steel handles and pins• Couplersaremanufacturedfromaglass-filledpolypropylene.
type D type B
type C type H 1
Size PolypropylenePart #
OptQty
¾" x½"¾"1"
1½" x 1¼"1½"2"3"4"
PPD50PPD75PPD100PPD125PPD150PPD200PPD300PPD400 2
242424242424248
Size PolypropylenePart #
OptQty
¾" x½"¾"1"
1½" x 1¼"1½"2"3"4"
PPB50PPB75PPB100PPB125PPB150PPB200PPB300PPB400 2
242424242424248
Size PolypropylenePart #
OptQty
¾" x½"¾"1"
1½" x 1¼"1½"2"3"4"
PPC50PPC75PPC100PPC125PPC150PPC200PPC300PPC400 2
242424242424248
Size PolypropylenePart #
OptQty
¾"1"
1½"2"3"4"
PPH75PPH100PPH150PPH200PPH300PPH400 2
24242424248
female coupler x female NPT female coupler x male NPT
female coupler x hose shank
dust cap
4" cap has 3 handles 2
locking handle pictured is only available in 1¼" thru 2"
Polypropylene Coupler Elbows• Recommended for a maximum working pressure of 100 PSI(1½"-2");recommendationsbasedontheuseofmatingDixonfittings
at an ambient temperature of 70°F with standard seal installed.• Couplerelbowsaremanufacturedfromaglass-filledpolypropylene.• Supplied with EPDM gaskets, 304 stainless steel handles and pins.• For use at elevated temperatures or other unusual operating conditions, consult factory.
FNPT x 90° Elbow
Size PolypropylenePart #
OptQty
1½"2"
90PPD15090PPD200
2424
Hose Shank x 90° Elbow
Size PolypropylenePart #
OptQty
1½"2"
90PPC15090PPC200
2424
female NPT x female coupler hose shank x female coupler
1 Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
2 4" coupler has 3 handles
28 Dixon 877.963.4966 ♦ dixonvalve.com
Polypropylene
Replacement Parts for Polypropylene Cam & GrooveHandles
Used on sizes 430 Stainless SteelPart #
½"¾"1"
1¼"1½"2"3"4"
6159461594615946159561595615956159661596
1¼", 1½", 2" ½", ¾", 1", 3", 4"
GasketsUsed on sizes EPDM
Part #½"¾"1"
1¼"1½"2"3"4"
6157061570615716157261572615746157562797
Key RingsUsed on sizes 304 Stainless Steel
Part #½"¾"1"
1¼"1½"2"3"4"
6158961589615896158961589615896158961589
Cam Handle PinsUsed on sizes 304 Stainless Steel
Part #½"¾"1"
1¼"1½"2"3"4"
6158261582615826158561585615856158461584
Safety Clips
Used on sizes 304 Stainless SteelPart #
1¼"1½"2"
635456354563545
29Dixon 877.963.4966 ♦ dixonvalve.com
Swaged Cam and Groove Fittings
coupler x hose shank with ferrule
Swaged Cam and Groove• DevelopedspecificallyforchemicaltransporthoseshavingCrosslinkedPolyethylene(XLPE)orUltraHighMolecularWeightPolyethylene(UHMW)tubes.SwagedBoss-Lockprovidesyouwithapermanentlyattachedcamandgroovefittingwhensuperior coupling retention is required.
• Intestingtanktransporthosesfromawidevarietyofmanufacturers,theswagedBoss-Lockfittingproveditselftobetheclearwinner in overall performance.
• Fittings are also available on special order for other sizes or hose OD's. Consult the factory for pricing and availability.• Consult the factory for pricing and availability of the special equipment required for installation.
adapter x hose shank with ferrule
SizeHose OD 316 Stainless Steel
Part #from to¾"1"1"
1-6/64"1-29/64"1-36/64"
1-22/64"1-35/64"1-44/64"
RC075EZ-70RC100EZ-20RC100EZ-70
EZ Boss-Lock type C coupler with ferrule
SizeHose OD 316 Stainless Steel
Part #from to¾"1"1"
1-6/64"1-29/64"1-36/64"
1-22/64"1-35/64"1-44/64"
RE075-1370RE100-1620RE100-1770
Boss-Lock type E adapter with ferrule
Notched Ferrules
SizeHose OD 304 Stainless Steel
Part #from to1½"1½"2"2"3"3"4"
1-60/64"2-4/64"2-30/64"2-42/64"3-30/64"3-47/64"4-40/64"
2-12/64"2-22/64"2-44/64"2-54/64"3-46/64"3-54/64"4-47/64"
GAS2334NOGAS2370NOGAS2709NOGAS2885NOGAS3760NOGAS3885NOGAS5010NO
Dixon stems and ferrules are specifically designed to be used together as a coupling system.Due to differences in dimensions and tolerances for safety reasons,
do not use other manufacturer's stems or ferrules with Dixon products.
30 Dixon 877.963.4966 ♦ dixonvalve.com
Notched Cam and Groove Fittings
female coupler xnotched hose shank
stainless steel
swaged assemblycrimped assembly
Contact the factory for swage and crimp recommendations.
Dixon stems and ferrules are specifically designed to be used together as a coupling system.Due to differences in dimensions and tolerances for safety reasons,
do not use other manufacturer's stems or ferrules with Dixon products.
male adapter xnotched hose shank
stainless steel
Notched Cam and Groove
Size 316 Stainless SteelPart #
1½"2"3"4"
RC150EZNORC200EZNORC300EZNORC400EZNO
EZ Boss-Lock type C with notched shank
female coupler xnotched hose shank
stainless steel
Size 316 Stainless SteelPart #
1½"2"3"4"
RC150BLNORC200BLNORC300BLNORC400BLNO
Boss-Lock type C with notched shank
Size 316 Stainless SteelPart #
1½"2"3"4"
RE150NORE200NORE300NORE400NO
Boss-Lock type E with notched shank
crimped assemblyswaged assembly
Contact the factory for swage and crimp recommendations.
Couplers
Adapters
• The largest advantage of the notched EZ Boss-Lock design is that the coupling can be removed from a damaged hose by cutting awaytheferrule,withoutnecessarilydamagingthefitting.After inspection of the fitting to determine its suitability for reuse, it can be reinstalled into another hose by using a new ferrule.
• The notched EZ Boss-Lock system allows you to better manage your inventories. You can stock one coupling and two ferrules, and cover the same hose range with less inventory. You must purchase a fitting and the matching ferrule to create an assembly.
• for use with notched ferrules on previous page
31Dixon 877.963.4966 ♦ dixonvalve.com
Notched Cam and Groove Fittings
male adapter xnotched NOS hose shank
stainless steel
female coupler xnotched NOS hose shank
stainless steel
Notched NOS Ferrules
crimped assemblyswaged assembly
Contact the factory for swage and crimp recommendations.
Dixon Cam and Groove with Notched NOS Shank
Couplers
Adapters
swaged assemblycrimped assembly
Contact the factory for swage and crimp recommendations.
Size 316 Stainless SteelPart #
1½"2"3"
150CNOSSS200CNOSSS300CNOSSS
Dixon type C with NOS shank
Size 316 Stainless SteelPart #
1½"2"3"
150ENOSSS200ENOSSS300ENOSSS
type E with NOS shank
Only use the NOS shank with the NOS ferrules.Due to differences in dimensions and tolerances for safety reasons, do not use other
manufacturer's stems or ferrules with Dixon products.
• The largest advantage of the notched design is that the coupling can be removed from a damaged hose by cutting away the ferrule,withoutnecessarilydamagingthefitting. After inspection of the fitting to determine its suitability for reuse, it can be reinstalled into another hose by using a new ferrule.
• The notched system allows you to better manage your inventories. You can stock one stem and two ferrules, and cover the same hose range with less inventory. You must purchase a fitting and the matching ferrule to create an assembly.
• For hose outside diameters of 2-4/64" and below, the couplings are crimp only.• For hose outside diameters of 2-5/64" and above, the couplings can be crimped or swaged.
• for use with notched ferrules at bottom of the page
SizeHose OD Carbon Steel
Part #304 Stainless Steel
Part #From: To:1½"1½"2"2"3"3"
1-60/64"2-4/64"2-30/64"2-42/64"3-30/64"3-47/64"
2-12/64"2-22/64"2-44/64"2-54/64"3-46/64"3-54/64"
CAS2334NOSCAS2370NOSCAS2709NOSCAS2885NOSCAS3760NOSCAS3885NOS
GAS2334NOSGAS2370NOSGAS2709NOSGAS2885NOSGAS3760NOSGAS3885NOS carbon steel
32 Dixon 877.963.4966 ♦ dixonvalve.com
Tank Car Cam and Groove Fittings
Dixon Tank Car Adapters
Size AluminumPart #
4" 40A-45TCAL
• standard 5" Railroad Tank Car thread• 45° tank car swivel adapter• unit has a long handle brass swivel nut and a swivel retaining ring• supplied with a Buna-N gasket in the threaded end, see below for other gasket types
railroad thread x male adapteraluminum
swivel railroad thread x 45° male adapter
aluminum
Dixon Railroad Tank Car Connections
Size AluminumPart #
BrassPart #
IronPart #
316 Stainless SteelPart #
2"3"4"
200-TCA-AL300-TCA-AL400-TCA-AL
---300-TCA-BR400-TCA-BR
---300-TCA-MI---
200-TCA-SS300-TCA-SS400-TCA-SS
• standard 5" Railroad Tank Car thread• supplied with a Buna-N gasket in the threaded end, see below for other gasket types
Stainless steel adapters are not compatible with the aluminum and brass adapters.
• all swivel nuts have standard 5" Railroad Tank Car Thread• supplied with a Buna-N gasket in the threaded end, other gasket types are available on previous
page• Tank car connections are also available in other materials and in 2" and 2½" sizes. Consult
factory for pricing and availability.
Style T
Style A
ShankSize
SwivelNut
IronPart #
AluminumPart #
3"4"
5"5"
TCS30TCS40
ATCS30ATCS40
• shank is 20° below horizontal
MaleNPT
SwivelNut
IronPart #
AluminumPart #
316 Stainless SteelPart #
3"4"
5"5"
TCT30TCT40
ATCT30ATCT40
RTCT30RTCT40
• Stainless steel railroad tank car connections are not compatible with aluminum and brass.• 3" threaded end is 30° below horizontal• 4" threaded end is 20° below horizontal
Style S
Adapter SwivelNut
316 Stainless SteelPart #
3"4"
5"5"
RTCA30RTCA40 1
1 Parts are produced as a welded fabrication.
• Stainless steel railroad tank car connections are not compatible with aluminum and brass.• adapter is 20° below horizontal
railroad thread swivel nutx 20° hose shank
iron
railroad thread swivel nutx 20° male NPTstainless steel
railroad thread swivel nutx 20° adapterstainless steel
33Dixon 877.963.4966 ♦ dixonvalve.com
Cam and Groove Fittings
female coupler x female coupleraluminum
Cam and Groove x Cam and Groove Elbows
Size AluminumPart #
316 Stainless SteelPart #
2"3"4"6"
200DA-45AL 1
300DA-45AL400DA-45AL600DA-45AL
200DA-45SS 1
300DA-45SS 1
400DA-45SS 1
---
adapter x coupler
1 Parts are produced as a welded fabrication.
coupler x coupler
Size AluminumPart #
316 Stainless SteelPart #
2"3"4"6"
200DD-45AL300DD-45AL400DD-45AL600DD-45AL
---300DD-45SS
------
Parts are produced as a welded fabrication.
adapter x coupler
1 Parts are produced as a welded fabrication.2 EZ Boss-Lock design (not pictured)
Size AluminumPart #
316 Stainless SteelPart #
1"1½"2"3"4"5"6"
---150DA-90AL 1
200DA-90AL300DA-90AL400DA-90AL500DA-90AL 1
600DA-90AL
100DA-90SS 1
150DA-90SS 1
200DA-90SS300DA-90SS400DA-90SS---RDA90600EZ 1, 2
Size AluminumPart #
316 Stainless SteelPart #
2"3"4"6"
200DD-90AL300DD-90AL400DD-90AL600DD-90AL
---300DD-90SS------
coupler x coupler
Parts are produced as a welded fabrication.female coupler x female coupler
aluminum
90° Elbows
• Couplers are supplied standard with a Buna-N gasket.
45° Elbows
male adapter x female coupleraluminum
male adapter x female coupleraluminum
Dixon Railroad Tank Car ConnectionsStyle F
TTMA Flange SwivelNut
AluminumPart #
3" 5" ATCF40 1
1 Parts are produced as a welded fabrication.
• for transloading bio and other fuels• 4"TTMAflangecanbeboltedtosightglassorAPIadapterorotherdrydisconnect• 4"flangeendis20°belowhorizontal
railroad thread swivel nutx 20° TTMA flange
aluminum
34 Dixon 877.963.4966 ♦ dixonvalve.com
Cam and Groove Fittings
Cam and Groove Elbows
male adapter x female NPT 90° elbow
1 Parts are produced as a welded fabrication.
female coupler x female NPT 90° elbow
1 Parts are produced as a welded fabrication.2 EZ Boss-Lock design (not pictured)
male adapter x hose shank 90° elbow
1 Parts are produced as a welded fabrication.
female coupler x hose shank 90° elbow
1 Parts are produced as a welded fabrication.
Type E
Type A
male adapter x female NPTstainless steel
female coupler x female NPTaluminum
male adapter x hose shankaluminum
female coupler x hose shankaluminum
Type D• Couplers are supplied standard with a Buna-N gasket
Type C• Couplers are supplied standard with a Buna-N gasket.
Size AluminumPart #
316 Stainless SteelPart #
1½"2"3"4"
150A-90AL200A-90AL300A-90AL400A-90AL
---200A-90SS 1
300A-90SS---
Size AluminumPart #
BrassPart #
316 Stainless SteelPart #
1"1¼"1½"2"3"4"4"6"
------150D-90AL200D-90AL300D-90AL400D-90ALAD90400EZ 2
600D-90AL
---125D-90BR150D-90BR200D-90BR------------
100D-90SS------200D-90SS300D-90SS400D-90SS 1
------
Size AluminumPart #
316 Stainless SteelPart #
2"3"4"6"
---300E-90AL400E-90AL600E-90AL 1
200E-90SS 1
300E-90SS400E-90SS 1
---
Size AluminumPart #
BrassPart #
316 Stainless SteelPart #
1¼"1½"2"3"4"6"
---150C-90AL200C-90AL300C-90AL400C-90AL600C-90AL
125C-90BR---200C-90BR---------
---150C-90SS200C-90SS300C-90SS400C-90SS 1
---
35Dixon 877.963.4966 ♦ dixonvalve.com
Cam and Groove Fittings
Cam and Groove Elbows
Size AluminumPart #
316 Stainless SteelPart #
1½"2"3"
150F-90AL200F90AL---
---200F-90SS 1
300F-90SS 1
male adapter x male NPT 90° elbow
1 Parts are produced as a welded fabrication.
Type F
male adapter x male NPTaluminum
Size AluminumPart #
316 Stainless SteelPart #
1½"2"3"
150B-90AL200B-90AL---
---200B-90SS 1
300B-90SS 1
female coupler x male NPT 90° elbow
1 Parts are produced as a welded fabrication.
• Couplers are supplied standard with a Buna-N gasket
Type B
female coupler x male NPTaluminum
Reducing Cam and Groove Couplings
Size AluminumPart #
316 Stainless SteelPart #
2" x 1½"2" x 3"3" x 2"3" x 4"4" x 3"4" x 6"6" x 4"
2015-A-AL2030-A-AL3020-A-AL3040-A-AL4030-A-AL4060-A-AL6040-A-AL
2015-A-SS 1
2030-A-SS3020-A-SS---4030-A-SS 1
---6040-A-SS 1
male adapter x female NPT
1 Parts are produced as a welded fabrication.
Type F
reducingmale adapter x female NPT
stainless steel
Size AluminumPart #
BrassPart #
316 Stainless SteelPart #
1½" x 1"2" x 1½"3" x 2"4" x 3"5" x 4"6" x 4"
1510-D-AL 1
2015-D-AL3020-D-AL4030-D-AL5040-D-AL 1
6040-D-AL 1
---------4030-D-BR------
1510-D-SS 1
2015-D-SS3020-D-SS4030-D-SS 1
------
female coupler x female NPT
1 Parts are produced as a welded fabrication.
• Couplers are supplied standard with a Buna-N gasket
Type D
reducingfemale coupler x female NPT
aluminum
36 Dixon 877.963.4966 ♦ dixonvalve.com
Reducing Cam and Groove Fittings
Reducing Cam and Groove Couplings
Size AluminumPart #
316 Stainless SteelPart #
2" x 1½"3" x 2"
3" x 2½"4" x 3"5" x 4"
2015-E-AL 1
------4030-E-AL5040-E-AL 1
2015-E-SS 1
3020-E-SS 1
3025-E-SS4030-E-SS 1
---
male adapter x hose shank
1 Parts are produced as a welded fabrication.
Type E
reducingmale adapter x hose shank
aluminum
Size AluminumPart #
316 Stainless SteelPart #
2" x 1½"3" x 2"
3" x 2½"3" x 4"4" x 3"5" x 4"
2015-C-AL 1
3020-C-AL---3040-C-AL4030-C-AL5040-C-AL 1
2015-C-SS 1
3020-C-SS3025-C-SS---4030-C-SS 1
---
female coupler x hose shank
1 Parts are produced as a welded fabrication.
• Couplers are supplied standard with a Buna-N gasket
Type C
reducingfemale coupler x hose shank
stainless steel
Inreducingcouplings,thecamandgrooveendisthefirstsizegiveninthepartnumber.(i.e., a 4030-B-AL is a 4" coupler to a 3" male NPT).
Size AluminumPart #
316 Stainless SteelPart #
1½" x 2"2" x 1½"2" x 3"
3" x 1½"3" x 2"3" x 4"4" x 3"
1520-F-AL2015-F-AL2030-F-AL3015-F-AL3020-F-AL3040-F-AL4030-F-AL
---2015-F-SS 1
---3015-F-SS 1
3020-F-SS---4030-F-SS 1
male adapter x male NPT
1 Parts are produced as a welded fabrication.
Type F
reducingmale adapter x male NPT
aluminum
Size AluminumPart #
316 Stainless SteelPart #
1½" x 1"2" x 1½"2" x 3"3" x 2"3" x 4"4" x 3"
1510-B-AL2015-B-AL2030-B-AL3020-B-AL3040-B-AL4030-B-AL
1510-B-SS 1
2015-B-SS 1
---3020-B-SS 1
---4030-B-SS 1
female coupler x male NPT
1 Parts are produced as a welded fabrication.
• Couplers are supplied standard with a Buna-N gasket
Type B
reducingfemale coupler x male NPT
stainless steel
37Dixon 877.963.4966 ♦ dixonvalve.com
Reducing Cam and Groove Fittings
1 Parts are produced as a welded fabrication.2 The 8" coupler has 4 cam arms and does not interchange.
Dixon Reducing Cam and Groove Couplings
Size AluminumPart #
316 Stainless SteelPart #
1" x 1½"1½" x 1"1½" x 2"2" x 1"
2" x 1½"2" x 2½"2" x 3"2" x 4"
2½" x 2"2½" x 3"3" x 1½"3" x 2"
3" x 2½"3" x 4"3" x 6"4" x 2"
4" x 2½"4" x 3"4" x 5"4" x 6"5" x 3"5" x 4"5" x 6"6" x 3"6" x 4"6" x 5"8" x 6"
1015-DA-AL 1
1510DAAL1520-DA-AL2010-DA-AL 1
2015-DA-AL2025-DA-AL 1
2030-DA-AL2040-DA-AL------3015-DA-AL3020-DA-AL3025-DA-AL 1
3040-DA-AL3060-DA-AL 1
4020-DA-AL4025-DA-AL4030-DA-AL4050-DA-AL4060-DA-AL5030-DA-AL 1
5040-DA-AL5060-DA-AL 1
6030-DA-AL6040-DA-AL6050-DA-AL8060-DA-AL 1, 2
1015-DA-SS 1
1510-DA-SS 1
1520-DA-SS2010-DA-SS 1
2015-DA-SS2025-DA-SS 1
2030-DA-SS2040-DA-SS 1
2520-DA-SS 1
2530-DA-SS 1
3015-DA-SS 1
3020-DA-SS3025-DA-SS 1
3040-DA-SS3060-DA-SS 1
4020-DA-SS 1
4025-DA-SS 1
4030-DA-SS---4060-DA-SS 1
5030-DA-SS 1
5040-DA-SS 1
5060-DA-SS6030-DA-SS 1
6040-DA-SS6050-DA-SS 1
---
coupler x adapter
Inreducingcamandgroovecouplings,thecoupleristhefirstsizeinthepartnumber;(i.e., a 4030-DA-AL is a 4" coupler to a 3" adapter).
• Couplers are supplied standard with a Buna-N gasket,
4" coupler x 6" adapteraluminum
3" coupler x 1½" adapteraluminum
3" coupler x 2½" adapteraluminum
5" coupler x 6" adapteraluminum
Size BrassPart #
IronPart #
3" x 2"3" x 4"4" x 3"6" x 4"
3020-DA-BR3040-DA-BR4030-DA-BR6040-DA-BR
3020-DA-MI---4030-DA-MI6040-DA-MI
Reducing Coupler x Adapter with Port
Size Tap Size 316 Stainless SteelPart #
3" x 2"3" x 4"4" x 3"6" x 4"
¼"3/8"½"¾"
3020DAT25SS3020DAT38SS3020DAT50SS3020DAT75SS
port on lug
38 Dixon 877.963.4966 ♦ dixonvalve.com
Cam and Groove Fittings
1 Parts are produced as a welded fabrication.2 The 8" coupler does not interchange with any other style.
• Couplers are supplied standard with a Buna-N gasket• Dust caps and dust plugs are not to be used in pressure applications for safety and
environmental reasons.
Boss-Lock Reducing Cam and Groove Couplings
Size AluminumPart #
316 Stainless SteelPart #
2" x 3"2½" x 2"2½" x 3"3" x 2"3" x 4"4" x 2"4" x 3"6" x 4"8" x 6"
ADA2030 1
ADA2520 1
ADA2530 1
ADA3020ADA3040 1
ADA4020 1
ADA4030ADA6040 1
ADA8060 1, 2
RDA2030BL 1
------RDA3020BLRDA3040BL 1
RDA4020BL 1
RDA4030BL------
coupler x adapter
Inreducingcamandgroovecouplings,thecoupleristhefirstsizeinthepartnumber;(i.e., a ADA4030 is a 4" coupler to a 3" adapter).• Couplers are supplied standard with a Buna-N gasket
3" coupler x 2" adapteraluminum
EZ Boss-Lock Reducing Cam and Groove Couplings
Size AluminumPart #
316 Stainless SteelPart #
2" x 3"3" x 2"3" x 4"4" x 2"4" x 3"6" x 4"
ADA2030EZ 1
ADA3020EZADA3040EZ 1
ADA4020EZ 1
ADA4030EZADA6040EZ 1
RDA2030EZ 1
RDA3020EZRDA3040EZ 1
RDA4020EZ 1
RDA4030EZRDA6040EZ
Inreducingcamandgroovecouplings,thecoupleristhefirstsizeinthepartnumber;(i.e., a ADA4030EZ is a 4" coupler to a 3" adapter).• Couplers are supplied standard with a Buna-N gasket
coupler x adapter
3" coupler x 2" adapteraluminum
Dixon Lockable Dust Caps
Size AluminumPart #
BrassPart #
1½"2"3"4"6"
150DC-LAL200DC-LAL300DC-LAL400DC-LAL600DC-LAL
150DC-LBR200DC-LBR300DC-LBR400DC-LBR---
• with angled, ergonomic thumb release
Size 316 Stainless SteelPart #
1½"2"3"4"
150DC-LSS200DC-LSS300DC-LSS400DC-LSS
1 Parts are produced as a welded fabrication.
200DC-LALaluminum
200DC-LSSstainless steel
39Dixon 877.963.4966 ♦ dixonvalve.com
Spool Cam and Groove Fittings
Dixon Spool Adapters
Dixon Spool Couplers
Boss-Lock Spool Couplers
Size AluminumPart #
316 Stainless SteelPart #
1"1¼"1½"
1½" x 2"2"
2" x 3"2" x 4"
2½" x 3"2½" x 4"
3"3" x 4"
4"4" x 5"4" x 6"
5"5" x 6"
6"
------150-AA-AL1520-AA-AL200-AA-AL2030-AA-AL2040-AA-AL2530-AA-AL 1
2540-AA-AL 1
300-AA-AL3040-AA-AL400-AA-AL4050-AA-AL4060-AA-AL500-AA-AL 1
5060-AA-AL 1
600-AA-AL
100-AA-SS125-AA-SS 1
150-AA-SS1520-AA-SS200-AA-SS2030-AA-SS2040-AA-SS 1
2530-AA-SS 1
---300-AA-SS3040-AA-SS 1
400-AA-SS---4060-AA-SS 1
500-AA-SS 1
---600-AA-SS 1
adapter x adapter
Size BrassPart #
2"3"
200-AA-BR300-AA-BR
1 Parts are produced as a welded fabrication
1 Couplers are supplied standard with a Buna-N gasketcoupler x coupler
Couplers are supplied standard with a Buna-N gasketcoupler x coupler
Size AluminumPart #
316 Stainless SteelPart #
1½"2"
2" x 3"3"
3" x 4"4"
4" x 5"4" x 6"
5"6"
---200-DD-AL2030-DD-AL300-DD-AL3040-DD-AL400-DD-AL4050-DD-AL 1
4060-DD-AL 1
500-DD-AL 1
600-DD-AL 1
150-DD-SS 1
200-DD-SS2030-DD-SS300-DD-SS3040-DD-SS 1
400-DD-SS 1
4050-DD-SS 1
4060-DD-SS500-DD-SS600-DD-SS
1 Parts are produced as a welded fabrication
Size AluminumPart #
BrassPart #
2"2" x 3"
3"3" x 4"
4"6"
ADD200 1
ADD2030 1
ADD300 1
ADD3040 1
ADD400 1
---
RDD200EZRDD2030EZ 1
RDD300EZ 1
RDD3040EZ 1
RDD400EZ 1
RDD600EZ 1
1 Parts are produced as a welded fabrication
increaser / reducerstainless steel
same sizealuminum
same sizealuminum
increaser / reduceraluminum
same sizestainless steel
increaser / reduceraluminum
40 Dixon 877.963.4966 ♦ dixonvalve.com
Cam and Groove Fittings
Adapters and Couplers x 150# Flanged Drilling
adapter x 150# ASA flangealuminum
coupler x 150# ASA flangestainless steel
EZ Boss-Lock couplerx 150# ASA flange
stainless steel
In-Line Sight Glass for Bulk Transfer
1 Parts are produced as a welded fabrication.
Size 316 Stainless SteelPart #
Approx. Flange
Thickness1"
1½"2"3"4"6"
RDL100EZ 1
RDL150EZ 1
RDL200EZRDL300EZ 1
RDL400EZ 1
RDL600EZ 1
9/16"11/16"7/16"7/16"7/16"5/8"
EZ Boss-Lock coupler x 150# flange
• Couplers are supplied standard with a Buna-N gasket.
Size AluminumPart #
IronPart #
316 Stainless SteelPart #
Approx. Flange
Thickness1"
1½"2"3"4"6"8"
------200-AL-AL300-AL-AL400-AL-AL600-AL-AL800-AL-AL 1
---------300-AL-MI---------
100-AL-SS150-AL-SS200-AL-SS300-AL-SS400-AL-SS600-AL-SS---
9/16"11/16"7/16"7/16"7/16"5/8"--
Dixon adapter x 150# flange
1 Parts are produced as a welded fabrication.
Size AluminumPart #
316 Stainless SteelPart #
Approx. Flange
Thickness1"
1½"2"3"4"6"8"
------200-DL-AL300-DL-AL400-DL-AL600-DL-AL800-DL-AL 1
100-DL-SS150-DL-SS200-DL-SS300-DL-SS400-DL-SS600-DL-SS---
5/8"25/32"7/16"7/16"7/16"5/8"--
Dixon coupler x 150# flange
1 Parts are produced as a welded fabrication.
• Couplers are supplied standard with a Buna-N gasket.
Size Part #
4" x 4"3" x 3"4" x 3"3" x 4"
3544CA3533CA3543CA3534CA
coupler x adapterSize Part #
3" x 3"4" x 4"3" x 4"
3533AA3544AA3534AA
adapter x adapterSize Part #
4" x 4"3" x 3"4" x 3"
3544CC3533CC3543CC
coupler x coupler
• Designed for dry bulk transfer hose. Includes aluminum bodies, Buna seals, acrylic sight glasses, stainless steel hardware and bronze cam arms (where applicable).
• Not intended for liquid service, for dry bulk transfer only.
41Dixon 877.963.4966 ♦ dixonvalve.com
Cam and Groove Fittings
TTMA Series Flange Adapters
Male Threaded
• providesasimpleandeasywaytoquicklyconvertthreadedcomponentstoastandardTTMAflangeconfiguration• more durable than welded fabrications due to the solid cast lightweight aluminum design• designimprovesflowthroughadapterevenonthe3"reducer• compact size reduces the overall space needed to install
Female Threaded
TTMAFlange
MaleNPT
AluminumPart #
3"4"4"
3"3"4"
TTF3AL-3MTTTF4AL-3MTTTF4AL-4MT
TTMA flange x standard male NPT
TTMAFlange
MaleNPT
AluminumPart #
4"4"
3"4"
TTF4AL-3EMTTTF4AL-4EMT
TTMA flange x extended length male NPT
TTMAFlange
FemaleNPT
AluminumPart #
4"4"
3"4"
TTF4AL-3FTTTF4AL-4FT
TTMA flange x female NPT
Extended Length - Male Threaded
Slip-on
TTMAFlange
PipeSize
AluminumPart #
4" 4" TTF400SP
TTMA flange x socket weld
TTMA flange x male NPT
TTMA flange x female NPT
TTMA flange x male NPTextended length
TTMA flange x socket weld
Specialty Items
Size AluminumPart #
2" 200YDAAAL
coupler x adapter wye
Size AluminumPart #
4" 400-TLT-AL
tank truck flanged tee
* Minimum production quantities may be required. Some parts have a colored anodized surface finish.
42 Dixon 877.963.4966 ♦ dixonvalve.com
Cam and Groove Fittings
Dixon 22½° Adapters and Couplers x Round Tank Truck Flange
22½° adapter x round flange
22½° coupler x round flange
Round Tank Truck Flange Gaskets (TTMA)
adapter x round tank truck flangealuminum
coupler x round tank truck flangealuminum
TTMA Flange Extensions
Dixon Adapters and Couplers x Round Tank Truck Flange
TETF4AL
TETFG4AL
Size AluminumPart #
3"3" x 4"
4"6"
300-DLT-AL3040DLTAL400-DLT-AL600-DLT-AL
coupler x round tank truck flange
• Couplers are supplied standard with a Buna-N gasket.
Size AluminumPart #
4" 40022DLTAL
22½° coupler x round tank truck flange• Couplers are supplied standard with a Buna-N gasket.
Size AluminumPart #
4" 40022ALTAL
22½° adapter x round tank truck flange
Size Description AluminumPart #
4"4"
TTMAflangeextensionTTMAflangeextensionwithgroove
TETF4ALTETFG4AL
Flange extensions are used on load arms to connect the API load coupler to the load arm.• adds a 6" space between the load arm and the tank truck• Flangeextensionwithgrooveprovidesaspecifiedpartingpointtopreventexcessivedamageto
the loading arm.
Size AluminumPart #
316 Stainless SteelPart #
3"3" x 4"
4"6"
300-ALT-AL3040ALTAL400-ALT-AL600-ALT-AL
300-ALT-SS 1
---400-ALT-SS 1
---
adapter x round tank truck flange
1 Parts are produced as a welded fabrication.
Size OD ID THK Material Part #3"3"3"3"4"4"4"4"
5-5/8"5-5/8"5-5/8"5-7/8"6-5/8"6-5/8"6-5/8"6-7/8"
3-½"3-½"3-½"3-½"
4-9/16"4-9/16"4-9/16"4-9/16"
1/8"1/16"1/8"¼"
1/8"1/16"1/8"¼"
Cork / BunaPTFE envelope with Klinger filler
Klingersil® C-4401PTFE with fiber core
Cork / BunaPTFE envelope with Klinger filler
Klingersil® C-4401PTFE with fiber core
300GTTFCB300GTTFTK300GTTFK40321TF400GTTFCB400GTTFTK400GTTFK40322TF
43Dixon 877.963.4966 ♦ dixonvalve.com
Cam and Groove Fittings
CouplerSize
Hose ShankSize
AluminumPart #
4"4"
3"4"
4030-CVR-AL400-CVR-AL
coupler with probe x hose shank
CouplerSize
AdapterSize
AluminumPart #
4" 3" 4030-DAVR-AL
coupler with probe x adapter
CouplerSize
Female NPTSize
AluminumPart #
4"4"
3"4"
4030-DVR-AL400-DVR-AL
coupler with probe x female NPT
CouplerSize
CouplerSize
AluminumPart #
4" 4" 400-DDVR-AL
coupler with probe x coupler with probe
Dixon Vapor Recovery Couplers
Dixon Bayco Vapor Recovery Couplers
CouplerSize
Hose ShankSize
AluminumPart #
3" 3" VRC3000AL
coupler with probe x hose shank
• Not intended for liquid service, for vapor recovery only.• The Dixon replacement handle assemblies will not work
on these fittings.• for use with 3" vapor hose• cast aluminum body, bronze arms with stainless steel pins andfingerrings
• Buna-N gasket
• cast aluminum body• bronze arms with stainless
steel pins
• platedcarbonsteelfingerrings
• Buna-N gasket
• Not intended for liquid service, for vapor recovery only.
CouplerSize
Hose ShankSize
AluminumPart #
4" 3" VR4030CS-AL 1
coupler with poppet and probe x hose shank
1 Interchanges with all competitor vapor valves except Civacon #633LVH (special bulb design).
• The VR4030CS-AL has a Viton® O-ring poppet seal.
4030-CVR-AL
VRC3000AL
400-DDVR-AL
4030-DVR-AL
4030-DAVR-AL
VR4030CS-AL
44 Dixon 877.963.4966 ♦ dixonvalve.com
Cam and Groove Fittings
Dixon Adapters for Welding
Dixon Butt Weld to Tube Cam and Groove• 316 stainless steel investment casting• designed to be butt welded to standard sanitary tubing• Finalweldpreparation,aswithallweldfittings,istheresponsibilityofthewelder.
Size Bore AluminumPart #
316 Stainless SteelPart #
¾"1"
1½"2"3"4"5"6"
8" DIX8" BL
1.0651.3301.9152.3903.5304.5305.5936.6558.7118.711
------150AWSPAL200AWSPAL300AWSPAL400AWSPAL500AWSPAL600AWSPAL800AWSPAL 1
801AWSPAL 1
75AWSPSS100AWSPSS150AWSPSS200AWSPSS300AWSPSS400AWSPSS500AWSPSS600AWSPSS------
socket weld to schedule 40 pipe
• notallconfigurationsarestocked• Linedrawingsareforreferenceonly.Consultthefactoryforspecificdimensions.• Finalweldpreparation,aswithallweldfittings,istheresponsibilityofthewelder.
Size Bore AluminumPart #
316 Stainless SteelPart #
¾"1"
1½"2"3"4"5"6"
8" BL
.7651.0151.5152.0153.0154.0155.0156.0208.035
------150AWBPSTAL200AWBPSTAL300AWBPSTAL400AWBPSTAL500AWBPSTAL600AWBPSTAL801AWBPSTAL 1
75AWBPSTSS100AWBPSTSS150AWBPSTSS200AWBPSTSS300AWBPSTSS400AWBPSTSS500AWBPSTSS600AWBPSTSS---
butt weld to schedule 40 pipe / socket weld to nominal OD tubing
Size 316 Stainless SteelPart #
1"1½"2"3"
RE100BTRE150BTRE200BTRE300BT
adapter x butt weld to tube end
Size 316 Stainless SteelPart #
1"1½"2"3"
RC100BTRC150BTRC200BTRC300BT
Boss-Lock coupler x butt weld to tube end
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size.
45Dixon 877.963.4966 ♦ dixonvalve.com
Cam and Groove Fittings
EZ Boss-Lock Couplers for Welding
Dixon Couplers for Welding• notallconfigurationsarestocked• Boss-Lock versions are also available. Consult the factory for pricing and availability.• Linedrawingsareforreferenceonly.Consultthefactoryforspecificdimensions.• Finalweldpreparation,aswithallweldfittings,istheresponsibilityofthewelder.
Size Bore AluminumPart #
316 Stainless SteelPart #
¾"1"
1½"2"3"4"5"6"8"
1.0701.3351.9252.4003.5404.5305.6706.6958.711
---100DWSPAL150DWSPAL200DWSPAL300DWSPAL400DWSPAL500DWSPAL600DWSPAL800DWSPAL 1
75DWSPSS100DWSPSS150DWSPSS200DWSPSS300DWSPSS400DWSPSS500DWSPSS600DWSPSS---
socket weld to schedule 40 pipe
Size Bore AluminumPart #
316 Stainless SteelPart #
¾"1"
1½"2"3"4"5"6"
.7651.0151.5152.0153.0154.0155.0156.015
------150DWBPSTAL200DWBPSTAL300DWBPSTAL400DWBPSTAL500DWBPSTAL600DWBPSTAL
75DWBPSTSS100DWBPSTSS150DWBPSTSS200DWBPSTSS300DWBPSTSS400DWBPSTSS------
butt weld to schedule 40 pipe / socket weld to nominal OD tubing
Size Bore 316 Stainless SteelPart #
¾"1"
1½"2"3"4"6"
1.0701.3351.9252.4003.5404.5506.695
RDWSP075EZRDWSP100EZRDWSP150EZRDWSP200EZRDWSP300EZRDWSP400EZRDWSP600EZ
socket weld to schedule 40 pipe
Size Bore 316 Stainless SteelPart #
¾"1"
1½"2"3"4"6"
.7651.0151.5152.0153.0154.0156.015
RDWBPST075EZRDWBPST100EZRDWBPST150EZRDWBPST200EZRDWBPST300EZRDWBPST400EZRDWBPST600EZ
butt weld to schedule 40 pipe / socket weld to nominal OD tubing
1 Dixon and Boss-Lock cam and groove couplings do not interchange in the 8" size. The 8" Dixon design has 4 cam arms.
46 Dixon 877.963.4966 ♦ dixonvalve.com
Accessories
Dixon Standard Handle Assemblies
Locking Handle for Dixon Dust Caps
Paddle Handle for Dixon Couplings
Boss-Lock Standard Handle Assemblies
CouplerSize Description Brass
Part #316 Sintered Stainless Steel
Part #316 Investment Stainless Steel
Part #½"¾"1"
1¼" - 2½"2"3"
3" - 5"3" - 5"
6"8"
cam arm and pincam arm and pincam arm and pin
cam arm, ring and pincam arm, ring and pincam arm, ring and pincam arm, ring and pin
cam arm, ring and short (1½") pincam arm, ring and pin
cam arm and pin for new coupler design
---------200-HRP-BR------300-HRP-BR300-HR325P-BR600-HRP-BR800-HNP-BR
50-HP-SP75-HP-SP100-HP-SP200-HRP-SP------300-HRP-SP300-HR325P-SP------
------------200-HSCRP-SI300-HSCRP-SI---300-HR325P-SI600-HRP-SI---
• Stainless steel pins are standard with all assemblies.• roll pins are 302 stainless and solid pins are 303 stainless• Pull rings are standard on sizes 1¼" thru 6". Pull rings are optional on other sizes.
Coupler Size
Hole Diameter
BrassPart #
2"3"4"
9/32"5/16"3/8"
200-LH-BR300-LH-BR400-LH-BR
• not supplied with pins
CouplerSize
BrassPart #
3" and 4" 300H-PADBR
• not supplied with pins
CouplerSize
316 Investment Cast Stainless SteelPart #
3" and 4" 300H-PADSS
CouplerSize
BrassPart #
316 Investment Cast Stainless Steel
Part #
Plated IronPart #
¾" - 1"1¼" - 2½"3" and 4"
BHSC175BHSC152BHSC34
RHSC175RHSC152RHSC34
---IHSC152IHSC34
assembly includes cam arm, pin and pull ring safety clip
CouplerSize
BrassPart #
Plated IronPart #
6" and 8" BH6 IH6
assembly includes cam arm, pin and pull ring
brass
brass
47Dixon 877.963.4966 ♦ dixonvalve.com
Accessories
Bayco Replacement Handle Assemblies
Pull Ring Safety Clips for Boss-Lock Couplings
EZ Boss-Lock Handles
Clips and Lanyards for Boss-Lock Couplings
Stainless Steel Pull Ring
Under no circumstances should the EZ Boss-Lock cam arms be used on any fitting not specifically produced for their use. The aluminum, brass and iron are made from sand castings. To ensure proper functioning of the EZ Boss-Lock cam arm
assemblies, we sort the castings to ensure there is sufficient length and orientation on the lugs on the main casting to engage the lever. We also buff or grind the rougher sand cast surface to ensure that the lever will move freely. The EZ Boss-Lock cam arms cannot be retrofitted onto existing aluminum, brass or plated iron Boss-Lock already in service.
for Bayco couplers only
CouplerSize
316 Stainless SteelPart #
¾" - 1"1¼" - 2½"3" and 4"6" and 8"
RHEZ175RHEZ152RHEZ34RHEZ6
• investment cast stainless steel cam arm and lever• 316 stainless steel spring• stainless steel pin, washer, plated carbon steel pull ring
CouplerSize
Carbon SteelPart #
316 Stainless SteelPart #
¾" - 1"1¼" - 2½"3" and 4"
---200PRSCCS300PRSCCS
100PRSCSS200PRSCSS300PRSCSS
Coupler Size Part #
¾" - 1"1¼" - 4"
ACL4ACL2
• carbon steel clip• nylon lanyard
304 Stainless SteelPart #
R200SS
CouplerSize Part #
1¼" - 2½"3" - 5"
6"8"
CARP12BZCARP34BZCARP60BZCARP80BZ
• brass cam arm• carbon steel ring• stainless steel pin
• carbon steel clip• no lanyard supplied with this clip
Coupler Size Part #
6" ACL3
48 Dixon 877.963.4966 ♦ dixonvalve.com
Accessories
Clip for Boss-Lock Couplings
Carbon Steel Clip Assembly
Jack Chains with S-Hooks
Sash Chains with Pull Rings
PVC Coated Lanyards
Hand Swager with Cutter
Part #
BLCA152CS
• for use with Boss-Lock couplings• includes a pull ring, chain and AC3 clip
Part #
22-ST14C
• for 1/16", 3/32" and 1/8" wire rope• designed for crimping aluminum oval sleeves• jaws are made of forged alloy steel• provides a clean, sharp cut on wire rope
• brass chain, plated steel pull ring
Length Part #
4½"6½"8½"
12¾"
J125J150J300J500
• PVC coated carbon steel with aluminum crimp sleeves• oneendfactorycrimped,oneenduncrimpedforfield
installation
Length Part #
15"25"
CAL15CAL25
Length Material Part # OptQty
6"12"24"12"6"
12"24"
brassbrassbrass
carbon steelstainlessstainlessstainless
CH-B-6CH-B-12CH-B-24CH-C-12CH-SS-6CH-SS-12CH-SS-24
1010--10101010
304 StainlessPart #
LR7
• breaking strength: 160 lbs.• overall length: 7" eye to eye
Stainless SteelPart #
AC7
• .072 stainless steel wire
Lanyard for Boss-Lock Couplings
49Dixon 877.963.4966 ♦ dixonvalve.com
GasketsCam and Groove Gaskets
• White neoprene and white Buna-N gaskets all contain FDA approved materials.
Size Buna-NPart #
Viton®-APart #
extra thick Buna-NPart #
Ethylene PropylenePart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"8"
50-G-BU75-G-BU100-G-BU125-G-BU150-G-BU200-G-BU250-G-BU300-G-BU400-G-BU500-G-BU600-G-BU800-G-BU
50-G-VI75-G-VI100-G-VI125-G-VI150-G-VI200-G-VI250-G-VI300-G-VI400-G-VI500-G-VI600-G-VI800-G-VI
------100GTHK125GTHK150GTHK200GTHK250GTHK300GTHK400GTHK---------
---75-G-EPR100-G-EPR125-G-EPR150-G-EPR200-G-EPR250-G-EPR300-G-EPR400-G-EPR---------
Size NeoprenePart #
white NeoprenePart #
white Buna-NPart #
SiliconePart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"8"
---75-G-NE100-G-NE125-G-NE150-G-NE200-G-NE250-G-NE300-G-NE400-G-NE---------
------------150-G-WNE200-G-WNE---300-G-WNE400-G-WNE500-G-WNE600-G-WNE---
---------------------300-G-WB400-G-WB---------
------------150-G-SIL200-G-SIL---300-G-SIL400-G-SIL---------
Cam and Groove Fuel Gaskets
Size Part # Material3"4"4"
300-G-BF400-G-BF400GTHKBF
BunaBunaextra thick Buna-N
50 Dixon 877.963.4966 ♦ dixonvalve.com
GasketsPTFE Cam and Groove Gaskets
The torque (force) required to close the handles on a pair of cam and groove fittings will vary according to the gasket chosen.Due to the nature of the PTFE material, the various PTFE gasket designs will require the most torque,
increasing as you go from envelope to encapsulated, and finally, accordion.
• PTFEwhiteBunafiller(TFWB)andPTFE encapsulated silicone (TES) all contain FDA approved materials.• PTFEaccordiongaskets(TFACC)arerecommendedforusewithviscous(thick)fluidsonly.• Encapsulated gasket pressure ratings are reduced to 125 PSI for¾" - 4" at ambient temperature (70°F)• PTFE encapsulated Viton® (TEV) gaskets - maximum operating temperature 200°F• PTFE encapsulated silicone gaskets (TES) gaskets - maximum operating temperature 225°F• Maximum operating temperatures for specific chemicals may be lower.ContactDixonforspecificrecommendations.
Accordion
Size PTFE accordionPart #
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"
---75GTFACC100GTFACC125GTFACC150GTFACC200GTFACC---300GTFACC---------
Encapsulated
Size PTFE encapsulated siliconePart #
PTFE encapsulated Viton®
Part #½"¾"1"
1¼"1½"2"
2½"3"4"5"6"
---75-G-TES100-G-TES125-G-TES150-G-TES200-G-TES250-G-TES300-G-TES400-G-TES------
---75-G-TEV100-G-TEV125-G-TEV150-G-TEV200-G-TEV250-G-TEV300-G-TEV400-G-TEV------
Size PTFE with Buna fillerPart #
PTFE with Viton® fillerPart #
PTFE with white Buna filler
Part #
PTFE with Ethylene Propylene filler
Part #½"¾"1"
1¼"1½"2"
2½"3"4"5"6"
50-G-TF75-G-TF100-G-TF125-G-TF150-G-TF200-G-TF250-G-TF300-G-TF400-G-TF---600-G-TF
50-G-TF-VI75-G-TF-VI100GTFVI125GTFVI150GTFVI200GTFVI250GTFVI300GTFVI400GTFVI---600GTFVI
---------------200GTFWB---300GTFWB400GTFWB500GTFWB---
------------150GTFEP200GTFEP---300GTFEP---------
Envelope
Envelope
Encapsulated
Accordion
51Dixon 877.963.4966 ♦ dixonvalve.com
Gaskets
Dixon Cam and Groove Gasket Color Codes
Dixon Cam and Groove Gasket Dimensions
'C'Thickness'B'
Inside Diameter
'A'Outside Diameter
Size Part # 'A' 'B' 'C'
½"¾"1"
1¼"1½"2"
2½"3"4"5"6"8"
50-G 1
75-G100-G125-G150-G200-G250-G300-G400-G500-G600-G800-G 1
1-1/32"1-3/8"1-9/16"1-15/16"2-3/16"2-5/8"3-1/8"
3-23/32"4-7/8"
5-15/16"7-1/16"9-5/16"
11/16"7/8"
1-1/16"1-23/64"1-5/8"
2"2-3/8"
3"4"
4-7/8"6"
8-1/8"
.156"
.218"
.250"
.250"
.250"
.250"
.250"
.250"
.250"
.250"
.250"
.343"
• The following are the nominal dimensions for Dixon's elastomeric cam and groove gaskets.• The ID's of the PTFE envelope gaskets and the PTFE accordion gaskets are 1/16" smaller than the ID's for the elastomeric
gaskets shown below.• Thickness of PTFE accordion gaskets may vary from chart below.
1 Nointerchangestandardexistsforthe½"and8"fittings.Generally,thesesizesdonotinterchangewithothermanufacturer'sproducts. As such, the gaskets in these sizes are not suitable for use in other manufacturers' couplings.
GasketCode Gasket Material Material
Color
Color code stripes (appear on the OD
of the gasket or filler)
-BU-BF-VI-THK-EPR-NE-WNE-WB-SIL-TFTFVITFWBTFEP-TES-TEVTFACC
Buna-N (standard in all metal fittings)Buna (formulated for fuel service)Viton®
Extra Thick BunaEthylene ProplyleneNeopreneWhite Neoprene, FDA approved materialWhite Buna N, FDA approved materialSiliconePTFE(TFE)EnvelopewithBuna-NfillerPTFE (TFE) Envelope with Viton®fillerPTFE(TFE)EnvelopewithWhiteBuna-Nfiller,FDA approved materialsPTFE(TFE)EnvelopewithEthylenePropylenefillerPTFE (FEP) Encapsulated Silicone core, FDA approved materialsPTFE (FEP) Encapsulated Viton® corePTFE (TFE) Accordion, FDA approved materials
blackblackblackblackblackblackwhitewhitered
white / blackwhite / blackwhite / whitewhite / black
translucent / redtranslucent / black
white
1 blue1 green1 yellow2 blue1 white1 rednonebluenone1 blue
1 yellowblue
1 white stripenonenonenone
Since other manufacturer's coding systems vary,this chart should not be used as a reference in identifying gaskets of unknown origin.
dixonvalve.com • Customer Service: 877.963.4966
Dixon is recognized as the premier manufacturer and supplier of hose fittings and accessories spanning a wide range of industrial uses. Dixon’s range includes products for food, dairy processing, beverage and brewery, mobile tankers, mining, construction, chemical processing, petroleum, oilfields, refining and manufacturing.
800 High Street, Chestertown, MD 21620Fax: 800.283.4966
Dixon Valve
© 2012 DVCC Printed in the USA CG5111P5M