carat product catalogue 2014

CARAT PRODUCT CATALOGUE 2014

CARAT GROUPCARAT NVAmbachtenstraat 72260 Westerlo, Belgium

tel. +32 (0)14 540 898fax +32 (0)14 540 897

[email protected]

H.R. Turnhout: 68.292BTW BE 0445.993.726

DIAMOND BLADESCHOOSING THE RIGHT DIAMOND BLADE 4

FOR UNIVERSAL USE 6

FOR CONCRETE AND HARD STONE MATERIALS 10

FOR BRICK AND ASPHALT 13

FOR TILES AND NATURAL STONE 15

FOR NATURAL STONE AND PLASTICS 19

FOR FIBRE CEMENT MATERIALS 20

FOR DO-IT-YOURSELF 21

ACCESSORIES 22

4

11.13

CHOOSING THE RIGHT DIAMOND BLADE

Four important questions for choosing the right diamond blade:

Which material?The range of Carat diamond blades is subdivided into 5 colours that clearly indicate their application:

UNIVERSAL, VARIOUS STONE MATERIALSDiamond blades suited for alternate cutting of medium hard to hard stone. This saves time because there is no need to swap diamond blades when sawing different types of stone.

CONCRETE, HARD STONE MATERIALSIdeal for sawing (reinforced) concrete, pebble dashed concrete tiles, concrete blocks, granite, paving bricks and all other hard to very hard types of stone.

BRICK, ASPHALTFor sawing soft, abrasive types of stone such as brick, limestone, asphalt, concrete younger than 28 days, etc.

TILES, NATURAL STONEFor sawing wall and floor tiles as well as natural stone such as marble and granite. The narrow opening between segments or the continuous rim guarantees a chip less cut.

ETERNIT® SIDINGS®, FIBRE CEMENT PANELSDiamond blades for sawing fibre cement and Eternit® Sidings® façade elements.

1

2

3

5

11.13

CHOOSING THE RIGHT DIAMOND BLADE

Which machine?An icon indicates on which machine the diamond blades can be used.

Angle grinder Cut-off grinder Table saw Wall saw Floor saw Tile saw Cross cut saw Circular saw

What quality?The amount of diamonds mentioned in the diamond blades indicates the quality level. The more diamonds there are in the bar the higher the quality and performance. Blade speedBRILLIANT

PREMIUM

STANDARD

ECONOMY

Performance

Properties of sawing blades, GRINDING CUPS and flush cutting blades

MM Segment height.

LASER Laserwelded, 100% warranty aginst agains tooth breakage.

DIATEX Diatex

SILENT + Sandwichblade: specially developed for extreme noice reduction.

SILENT Low noise.

MM Segment width.

TT-segments: Segments with a revolutionary corrugated point. These guarantee swift traction on the drilled material.

What is Diatex?When producing these segments the diamonds are placed like in a matrix. The distance between each diamond is identical and they are stacked in layers throughout the segment. After wearing one layer off, an entirely new layer will appear. Due to this process, each diamond is 100% utilised and the blade is sharp its whole life. Resulting in a significant increased lifespan and blade speed.

6

LASER UNIVERSAL BRILLIANT, type ‘EXCELLENT’•sawsanything!Reinforcedconcrete,allhardstonematerials,brick, limestone, steel, iron

14

LASER SILENT +

Ø mm arbour hole Ø mm order number

230 22,23 CER2303000350 20,00 CER3502000350 25,40 CER3504000

LASER UNIVERSAL BRILLIANT, type THUNDERLINE•sawssuper-fastinanymaterial•highperformance

11 ,5

LASER SILENT


115 22,23 CEB11530TT125 22,23 CEB12530TT140 22,23 CEB14030TT150 22,23 CEB15090TT150 30,00 CEB15050TT180 22,23 CEB18030TT230 22,23 CEB23030TT300 20,00 CEB30020TT300 22,23 CEB30030TT 300 25,40 CEB30040TT350 20,00 CEB35020TT350 25,40 CEB35040TT400 20,00 CEB40020TT400 25,40 CEB40040TT

11.13

DIAMOND BLADES FOR UNIVERSAL USE

7

LASER UNIVERSAL BRILLIANT, type CE-3•sawssuper-fastinanymaterial•highperformance•fittedwith3specificdiamondsegments•concrete,universalandbricksegments

SILENT

10

LASER

Ø mm Arbour hole Ø mm Order number

115 22.23 CED1153000 125 22.23 CED1253000 125 30.00 CED1255000 140 22.23 CED1403000 150 22.23 CED1509000 150 30.00 CED1505000 180 22.23 CED1803000 230 22.23 CED2303000 300 20.00 CED3002000 300 25.40 CED3004000 350 20.00 CED3502000 350 25.40 CED3504000

SILENT

10

LASER

11.13


8

11.13


UNIVERSAL ECONOMY, type CEE•costeffectivediamondblade

10

LASER


115 22,23 CEE115301F125 22,23 CEE125301F150 22,23 CEE150301F230 22,23 CEE230301F

UNIVERSAL ECONOMY, type CEE•costeffectivediamondblade

15


300 20,00 CEE3002015300 22,23 CEE3003015300 25,40 CEE3004015350 20,00 CEE3502015350 25,40 CEE3504015

UNIVERSAL STANDARD, type CDZS•continuoussegmentforabetterfinishtothecut

9


115 22,23 CDZS115300125 22,23 CDZS125300150 22,23 CDZS150300180 22,23 CDZS180300230 22,23 CDZS230300

9

11.13

LASER UNIVERSAL BRILLIANT, type CNEB•veryfastandhighperformance

10

LASER DIATEX SILENT +


300 25,40 CNEB300400300 30,00 CNEB300500350 25,40 CNEB350400400 25,40 CNEB400400450 25,40 CNEB450400500 25,40 CNEB500400600 25,40 CNEB600400

LASER UNIVERSAL STANDARD, type CNE•fittedwith“corrugated”segmentsforoptimisedfirstcut

10

LASER SILENT


250 25,40 CNE2504DC0300 25,40 CNE3004DC0300 30,00 CNE3005DC0350 25,40 CNE3504DC0400 25,40 CNE4004DC0450 25,40 CNE4504DC0500 25,40 CNE5004DC0600 25,40 CNE6004DC0650 25,40 CNE6504DC0700 25,40 CNE7004000

CARAT LASER UNIVERSAL ECONOMY, type CNEE

7

LASER


300 25,40 CNEE3004D0350 25,40 CNEE3504D0


10

11.13

DIAMOND BLADES FOR CONCRETE AND HARD STONE MATERIALS

LASER CONCRETE BRILLIANT, type CRB•highperformancesaw

10



300 20,00 CRB3002000300 25,40 CRB3004000350 20,00 CRB3502000350 25,40 CRB3504000400 20,00 CRB4002000400 25,40 CRB4004000450 25,40 CRB4504000500 25,40 CRB5004000600 25,40 CRB6004000

LASER CONCRETE STANDARD, type CS•veryfastcuttingturbosegment

10

10

LASER SILENTDIATEX

10 15


115 22,23 CS11530010125 22,23 CS12530010140 22,23 CS14030010150 22,23 CS15090010150 30,00 CS15050010180 22,23 CS18030010230 22,23 CS23030010300 20,00 CS30020010300 22,23 CS30030010300 25,40 CS30040010350 20,00 CS35020010350 25,40 CS35040010400 20,00 CS40020010400 25,40 CS40040010

11

11.13

TURBO BRILLIANT, type CDTB•revolutionarywithspecialprotectivesegmentsthatreducefrictioninthe

blade cut allowing the blade to remain cooler and more stable

7,5


115 22,23 CDTB115300125 22,23 CDTB125300180 22,23 CDTB180300230 22,23 CDTB230300

TURBO STANDARD, type CDTS•corrugatedmainbladeforextraaircoolingthatmakestheblademore

stable

9


115 22,23 CDTS115300125 22,23 CDTS125300150 22,23 CDTS150900180 22,23 CDTS180300230 22,23 CDTS230300

LASER CONCRETE ECONOMY, type CSE•costeffectivediamondsawforusewithamotorcut-offgrinder

10

LASER SILENT


300 20,00 CSE3002000300 22,23 CSE3003000300 25,40 CSE3004000350 20,00 CSE3502000350 25,40 CSE3504000400 20,00 CSE4002000400 25,40 CSE4004000


12

11.13


LASER BETON BRILLIANT, type CNCB•fastcuttingandhighperformance

10



300 25,40 CNCB300400300 30,00 CNCB300500350 25,40 CNCB350400400 25,40 CNCB400400450 25,40 CNCB450400500 25,40 CNCB500400600 25,40 CNCB600400

CARAT LASER CONCRETE STANDARD, type CNC•fittedwith“corrugated”segmentsforoptimalfirstcut

10

LASER SILENT


250 25,40 CNC2504DC0300 25,40 CNC3004DC0300 30,00 CNC3005DC0350 25,40 CNC3504DC0400 25,40 CNC4004DC0450 25,40 CNC4504DC0500 30,00 CNC5005DC0600 25,40 CNC6004DC0700 25,40 CNC7004000

CARAT LASER CONCRETE ECONOMY, type CNCE

7

LASER


300 25,40 CNCE3004D0350 25,40 CNCE3504D0

13

11.13

DIAMOND BLADES FOR BRICK AND ASPHALT

LASER ASFALT BRILLIANT, type CAB•premiumqualityasphaltlaserwithtiltedsegmentsforoptimalprotection

of the main blade

10



300 20,00 CAB3002000300 25,40 CAB3004000350 20,00 CAB3502000350 25,40 CAB3504000400 20,00 CAB4002000400 25,40 CAB4004000450 25,40 CAB4504000500 25,40 CAB5004000600 25,40 CAB6004000

LASER BAKSTEEN / ASFALT STANDARD, type CA•diamondbladefittedwithhardmetalprotectiveelements

10

LASER SILENT


115 22,23 CA11530000125 22,23 CA12530000140 22,23 CA14030000140 30,00 CA14050000150 22,23 CA15090000150 30,00 CA15050000180 22,23 CA18030000230 22,23 CA23030000300 20,00 CASS300200300 25,40 CASS300400350 20,00 CASS350200350 25,40 CASS350400400 20,00 CASS400200400 25,40 CASS400400

14

11.13

LASER BRICK / ASPHALT BRILLIANT, type CNAB•fastcuttingandhighperformance

10



300 25,40 CNAB300400300 30,00 CNAB300500350 25,40 CNAB350400400 25,40 CNAB400400450 25,40 CNAB450400500 25,40 CNAB500400600 25,40 CNAB600400

LASER BRICK / ASPHALT STANDARD, type CNA•fittedwith“corrugated”segmentsforoptimalfirstcut

10

LASER SILENT


300 25,40 CNA3004DC0300 30,00 CNA3005DC0350 25,40 CNA3504DC0400 25,40 CNA4004DC0450 25,40 CNA4504DC0500 25,40 CNA5004DC0600 25,40 CNA6004DC0700 25,40 CNA7004DC0

LASER BRICK / ASPHALT STANDARD, type CNAE•semi-professionalsaw

7

LASER SILENT


350 25,40 CNAE350400

DIAMOND BLADES FOR BRICK AND ASPHALT

15

11.13

DIAMOND BLADES FOR TILES AND NATURAL STONE

TILES, type RACER CDB•sawsextremelyfastandwithoutserrationoftiles•thinsegment:Ø 115, Ø 125: 1,2 mm / Ø 230: 1,4 mm

10


115 22,23 CDB1153000125 22,23 CDB1253000230 22,23 CDB2303000

DUAL PREMIUM•forgrindingandsawingtiles,naturalstoneandotherhardstone materials•suitableforalltypesofanglegrinderswithM14connection

7

Ø mm asgat order number

125 M14 CVNS125M00230 M14 CVNS230M00

16

11.13


TILES BRILLIANT, type CSMB•ideallysuitedforthehardestceramictiles•speciallydevelopedformachineswithupperguidetrack

10

SILENT +


250 25,40 CSMB2504D0300 25,40 CSMB3004D0350 25,40 CSMB3504D0

TILES BRILLIANT, type CDC•forfastsawingofveryhardwallandfloortiles

7


150 20,00 CDC1502000150 22,23 CDC1503000180 22,23 CDC1803000180 25,40 CDC1804000200 25,40 CDC2004000230 25,40 CDC2304000250 25,40 CDC2504000300 25,40 CDC3004000350 25,40 CDC3504000

17

11.13

LASER NATURAL STONE PREMIUM, type CNTS•ideallysuitedforthemostcommontypesofnaturalstone,suchas

marble, granite and blue stone.

10

LASER SILENT +


250 25,40 CNTS2504D0300 25,40 CNTS3004D0350 25,40 CNTS3504D0

BLUE STONE

10

LASER SILENT


300 25,40 CNB3004000350 25,40 CNB3504000

MARBLE

10

LASER SILENT


300 25,40 CNM3004000350 25,40 CNM3504000

GRANITE

10

LASER SILENT


300 25,40 CNG3004000350 25,40 CNG3504000


18

11.13


TILES PREMIUM, type CSMP•suitableforhardtiles

10 8

SILENTØ 115 Ø 125 Ø 115 Ø 125


115 22,23 CSMP115300125 22,23 CSMP125300150 22,23 CSMP150300150 25,40 CSMP150400180 25,40 CSMP180400200 25,40 CSMP200400230 25,40 CSMP230400250 25,40 CSMP250400300 25,40 CSMP300400350 25,40 CSMP350400

TILES STANDARD, type CSMS•Ideallysuitedforsofttilesbuthnotforhardtiles

7

Ø 115 Ø 125


110 22,23 CSMS110300125 22,23 CSMS125300150 22,23 CSMS150300180 25,40 CSMS180400200 25,40 CSMS200400230 25,40 CSMS230400250 25,40 CSMS250400300 25,40 CSMS300400350 25,40 CSMS350400

19

11.13

GALVANO DIAMOND BLADES FOR NATURAL STONE AND PLASTICS

GALVANO PREMIUM, type CEPS•forsawingmarbleandplasticssuchaspolyesterandfibreglass•fittedwithslotsintherim

4


100 22,23 CEPS100300115 22,23 CEPS115300125 22,23 CEPS125300 230 22,23 CEPS230300

GALVANO PREMIUM, type CEPC•forsawingmarbleandplasticssuchaspolyesterandfibreglass•fittedwithclosedrim

4


100 22,23 CEPC100300115 22,23 CEPC115300125 22,23 CEPC125300180 22,23 CEPC180300230 22,23 CEPC230300250 30,00 CEPC250500300 30,00 CEPC300500350 30,00 CEPC350500

20

11.13

DIAMOND BLADES FOR FIBRE CEMENT MATERIALS

BRILLIANT, type CDCE•suitableforsawingEternit® fibre cement façade elements and sidings

7


125 22,23 CDCE125300150 20,00 CDCE150200150 22,23 CDCE150300150 30,00 CDCE150500180 30,00 CDCE180500200 25,40 CDCE200400200 30,00 CDCE200500230 25,40 CDCE230400230 30,00 CDCE230500250 30,00 CDCE250500300 30,00 CDCE300500350 30,00 CDCE350500

21

11.13

DIAMOND BLADES FOR DO IT YOURSELF

GOLD LASER UNIVERSAL

12 10

Ø 1 15 Ø 125 LASER


115 22,23 CEG1153010125 22,23 CEG1253010150 22,23 CEG1509012180 22,23 CEG1803012230 22,23 CEG2303012

SILVER UNIVERSAL

Ø 1 15

12 10

Ø 125


115 22,23 CESI115310125 22,23 CESI125310150 22,23 CESI150912180 22,23 CESI180312230 22,23 CESI230312

BRONZE UNIVERSAL

10


115 22,23 CEBR115310125 22,23 CEBR125310150 22,23 CEBR150910180 22,23 CEBR180310230 22,23 CEBR230310

11.13

22

11.13

ACCESSORIES

CLIC-FIX, quick-locking nut•swapthediamondsawinaninstantwiththehandyCLIC-FIX•nospecialtoolsneededtoloosentheflange•verysafe:tightensitself•noproblemincaseofincorrectassembly

description order number

Aansluiting M14 MZCF000000

DUSTCATCH, universal dust cover for angle grinders•reducesdustgenerationwhendrysawingwithdiamondsawsorangle

grinders to an absolute minimum•fitsonvirtuallyallprofessionalHitachi,Makita,Metabo,Bosch,

Milwaukee and Dewalt angle grinders•availableinØ 125 and 230 mm•withdepthadjustment


Dustcatch Ø 125 MZAD125013Dustcatch Ø 230 MZAD230013

dust extraction

Makita Metabo Bosch Hitachi Dewalt9555NB (K) W 8-125 (Quick) GWS 8-125 G13SB (2) (3) D281309558NB (KD2) WP 8-125 Quickprotect GWS 10-125 (Z) G13SD D281339558HN (GKD2) (KD2) WE 9-125 Quick GWS 11-125

(P) (CI) (CIE) (CIH)

GWS 12-125 (CI) (CIE) (CIEP)

GWS 14-125 (CI) (CIE) (CE) (CIT)

GWS 15-125 (CI) (CIE) (CIEH) (CIT) (CIP) (CIH) (CITH)

G13SPG13VG13YCG13YD

D28134D28135D28136DCG412

MT963 W 11-125 Quick9558PB WB 11-125 QuickGA5030 (K) WP 11-125 QuickprotectGA5034 WE 14-125 Plus9565CV WEP(A) 14-125 QuickprotectGA5021C WE(A) 14-125 Quick9562CHX WPA 14-125 Quickprotect

following angle grinders can be equipped with Dustcatch: Ø 125 mm

Ø 230 mmHitachi Makita Bosch Metabo Dewalt MilwaukeeG23MRU GA 9010 GWS 22-230 H W-21 230 D-28400 AG 21-230 (E)/(DMS)G23UBY GA 9020 GWS 24-230 LVI W-23 230 D-28423 AGV 21-230 E/(DMS)G23SEY GA 9030 GWS 24-230 H W-25-230 D-28432c AGV21-230GE(X)/(DMS)G23SCY GA 9040 GWS24-230JVX D-28498 AG 24-230 (E)/(DMS)G23SC3 GWS 24-230 LVI AGV 24-230GE/(DMS)G23SR GWS 24-230 BV AGV 26-230 GE/(DMS)G23SRU GWS 26-230 LVI

GWS 26-230 JBV

DIAMOND TUCK-POINTS AND GRINDING CUPSDIAMOND FLUSH CUTTING BLADES 24

DIAMOND GRINDING CUPS 26

24

11.13

DIAMOND FLUSH CUTTING BLADES

H-PREMIUM, type CTP•highqualityforprofessionaluse•forgrindingmediumhardtohardcementjoints•longprotectionsegmentsagainstexcessivewearofthemetalbody

66


80 22,23 CTP0803000115 22,23 CTP1153000125 22,23 CTP1253000

8

125 22,23 CTP1253008

H-PREMIUM, type CTP•withzigzag-segments

86


115 22,23 CTP11530Z8125 22,23 CTP12530Z8

H-STANDARD, type CTY•semi-professionaluse (alternative for type CTP)•longprotectionsegmentsagainstexcessivewearofthemetalbody

66


115 22,23 CTY1153000125 22,23 CTY1253000

11.13

25

Z-PREMIUM, type CTC•forgrindingsoftcementjoints•highqualityforprofessionaluse•longprotectionsegmentsagainstexcessivewearofthemetalbody

66


115 22,23 CTC1153000125 22,23 CTC1253000

86

125 22,23 CTC1253008

Z-PREMIUM, type CTC•withzigzag-segments

86


115 22,23 CTC11530Z8125 22,23 CTC12530Z8

Z-STANDARD, type CTA •semi-professionaluse (alternative for type CTC)

66


115 22,23 CTA1153000125 22,23 CTA1253000

DIAMOND FLUSH CUTTING BLADES

11.1311.13

26

11.13

DIAMOND GRINDING CUPS

CONCRETE PREMIUM, type CUM•widesegmentdivisionforconsistentgrinding•highqualitywithextremelongevity•theholesinthecoremakethegrindingcupsuitableformachineswith

dust extraction, such as the Carat concrete grinder type BS-1252

4


100 22,23 CUM1003C00100 M14 CUM100MC00110 15,00 CUM1101C00125 22,23 CUM1253C00125 M14 CUM125MC00180 22,23 CUM1803C00

CONCRETE PREMIUM, type DF•highdiamonddensity•perfectfinishingwithexceptionallongevity•theholesinthecoremakethegrindingcupsuitableformachineswith


6


115 22,23 CUDF115300125 22,23 CUDF125300180 22,23 CUDF180300

27

11.13

DIAMOND GRINDING CUPS

CONCRETE STANDARD, type DG•theholesinthecoremakethegrindingcupsuitableformachineswith


6


115 22,23 CUDG115300125 22,23 CUDG125300180 22,23 CUDG180300

PCD GRINDING CUPS•latestgenerationPCDorPolycrystallinediamondsegments•removesglueresidue,bitumen,paint,carpetresidue,epoxyandothernon-

ferrous materials•theholesinthecoremakethegrindingcupsuitableformachineswith



125 22,23 CPCD125300180 22,23 CPCD180300

4

28

11.13

DIAMOND GRINDING CUPS DUSTEC®

DUSTEC® GRINDING CUPS•highquality,extremelongevity•doublerowofsegments•theholesinthecoremakethegrindingcupsuitableformachineswith

dust extraction, such as the Carat concrete grinder type BS-1252•availablein2types:concreteorbrick

Type CONCRETE PREMIUM•forgrindingconcreteandhardstonematerials

4


125 22,23 CUBD1253C0180 22,23 CUBD1803C0

Type BRICK PREMIUM•forgrindingsoft,sandytypesofstone

4


125 22,23 CUBD1253A0180 22,23 CUBD1803A0

MACHINESFOR TILERSMANUAL TILE CUTTERS 30TILE SAW MACHINES 31STONE SAW MACHINES 38TILE LEVELLING SYSTEM 40MIXER 41

FOR CONTRACTORSSTONE SAW MACHINES 42WALL SAW MACHINES 49SLOT SAW MACHINES 51CONCRETE GRINDER 53VACUUM CLEANERS 54CUT-OFF GRINDERS 56FLOOR SAWING MACHINE 58CHAINSAWS 59

30

11.13

MANUAL TILE CUTTERS

diagonal cutting

movable breaking

9 ball bearings

11.13

SUPERPRO MANUAL TILE CUTTERS•suspensionplatformsguaranteeaperfectcuttingsurface, even for large, hard tiles

technical details SUPERPRO 450

cutting length : 45 cmmax. thickness of tile : 1.9 cmdiagonal cut (max) : 320 x 320 mmorder number : BU30450000







CUTTING WHEEL Ø 22 MM for Superpro tile cutters

order number : BU49200000

31

CARAT TILE SAW MACHINES

water cooling

dust extraction

guide rail with

11.13

TC-1800•handheldtilesawmachineonrail•sawingofnaturalstoneand(concrete)tiles•PRCDswitch,softstartandoverloadprotection•includesØ 180 mm diamond blade, case and guide rail

technical details

engine : 1.8kW (2.5hp)voltage : 230VØ diamond blade : 180 x 22.23 mmmax. material thickness : 5.5 cmweight : 6.7 kg

AVAILABLE IN 2 VERSIONS:

machine including 3 40 cm rails + connectorsorder number : MZMB180PROmachine including one 140 cm rail order number : MZMB180REN

ACCESSORIES


guide rail 40 cm : MZMBAR0400guide rail 140 cm : MZMBAR1400rail clamp : MZMBAK0000rail coupling : MZMBARK000blades Ø 180 mm (dry/wet) : CDTC180300blades Ø 180 mm (for a more fine cut, only wet) : CDC1803000

32

11.13


adjustableslidingcompound

mitre sawing

cable holder

handle

11.13

MICROCOUP 180 ECONOMY•compacttilesawmachine•largecastaluminiumworktop•includesØ 180 mm diamond blade

technical details

engine : 0.75kW (1.0hp)voltage : 230VØ diamond blade : 180 x 25.40 mmmax. material thickness : 3 cmweight : 16.0 kgorder number : BUJ180A000

sawing blades for this machine page

tiles / natural stone : 16 - 18

33

11.13


large work top

11.13

MICROCOUP 230•includesØ230mmdiamondblade

technical details

engine : 1,2kW (1,6pk)voltage : 230VØ diamond blade : 230 x 25.40 mmmax. materiaaldikte : 4 cmmax. material thickness : 4 cmweight : 28.0 kgorder number : BUJ2300000

MICROCOUP 300•includesØ 300 mm diamond blade

technical details

engine : 2.3kW (3.0hp)voltage : 230VØ diamond blade : 300 x 25.40 mmmax. material thickness : 7 cmweight : 38.0 kgorder number : BUJ3000000

BASE FOR MICROCOUP 230 and 300order number : BUJO000000

base

34

11.13


MICROCOUP 230 DELUXE

technical details

engine : 1.2kW (1.6hp)voltage : 230VØ diamond blade : 230 x 25.40 mmmax. material thickness : 4 cmweight : 30.0 kgorder number : BUJ230S000

sawing blades for these machines page

tiles / natural stone : 16 – 18

sliding table

sliding compound mitre

base

35

11.13


11.13

MICROCOUP 260 ECONOMY•radialtilecutter•includesØ200mmdiamondblade

technical details

engine : 0.9kW (1.25hp)voltage : 230VØ diamond blade : 200 x 25.40 mmmax. material thickness : 3 cmmax. cutting length : 60 cmdiagonal cut (max) : 420 mmweight : 38.0 kgorder number : BUJ2006000


tiles : 16 – 18

foldable

mitre sawing

adjustableslidingcompoundmitre

36

11.13


CARACOUP•radialtilecutteridealforstraightand45ºanglecutsonporcelain

stoneware, tiles and double fired ceramic•slidingcuttingheadandtiltingengine•collapsablelegs•pumpforwaterrecycling•includesØ200mmdiamondblade

technical details

engine : 1.0kW (1.3hp)Voltage : 230VØ diamond blade : 200 x 25.40 mmmax. material thickness : 4 cm

Caracoup 265 Caracoup 295

max. cutting length : 65 cm 95 cmdiagonal cut (max) : 420 x 420 mm 630 x 630 mmweight : 34,0 kg 39,0 kgorder number : BUK2650000 BUK2950000


tiles : 16 – 18

plunge sawing

spray system

angle cuts

carriage engine group with 6 ball-bearings

37

11.13


CARACOUP ALU•radialtilecutteridealforstraightand45ºanglecutsonporcelain

stoneware, tiles, marble and double fired ceramic•slidingcuttingheadandtiltingengine•adjustablelegs•pumpforwaterrecycling•includesØ200mmdiamondblade

technical details

engine : 1.0kW (1.3hp)voltage : 230VØ diamond blade : 200 x 25.40 mmmax. material thickness : 4 cm

Caracoup 2067 ALU Caracoup 2090 ALU

max. cutting length : 67 cm 90 cmmax. tegel diagonaal : 450 x 450 mm 620 x 620 mmweight : 37,0 kg 41,0 kgorder number : BUCC2067LO BUCC2090LO



carriage engine group with 8 ball-bearings

angle cuts

plunge sawing

professionaladjustablegoniometer fence

fastleg

38

11.13

CARAT STONE SAW MACHINES

CARAT BD-3000 LASER•bridgesawwithdrivebelt,idealforstraightand45ºanglecutsofbricks,

stones, granite, marble and porcelain stoneware•slidingcuttingheadandtiltingengine•adjustablelegs•pumpforwaterrecycling

technical details

engine : 2,2kW (3 pk)voltage : 230Vmax. material thickness : 11 cmmax. material thickness (2 ways) : 20 cm

Carat BD-3007 Carat BD-3012

max. cutting length 76 cm 120 cmweight 68 kg 93 kgorder number BD3007L000 BD3012L000

sawing blades for this machine pagina


angle cuts

hand wheel (BD-3012)

plunge sawing

fastleg

professionaladjustablegoniometer fence

11.13

39

11.13


P-3500 LASER NATURAL STONE SAW MACHINES•bridgesaw,idealforstraightand45ºanglecutsofnaturalstones,granite

and marble slabs•slidingcuttingheadandtiltingengine•adjustablelegs•pumpforwaterrecycling

technical details

engine : 2,2kW (3,0 pk)voltage : 230VØ diamond blade : 350 x 25,40 mmmax. material thickness : 11 cmtransport dimensions W x H : 80 x 81 cm


universal / various stone materials : 6concrete / hard stone materials : 10brick : 13tiles / natural stone : 16 – 18

P-3506 P-3508 P-3510 P-3512 P-3515 P-3520

max. cutting length 60 cm 85 cm 100 cm 120 cm 150 cm 200 cm

transport length 133 cm 160 cm 176 cm 198 cm 230 cm 275 cm

weight 75 kg 80 kg 83 kg 86 kg 92 kg 103 kg

order number BP35060000 BP35080000 BP35100000 BP35120000 BP35150000 BP35200000

hand wheel (except P-3506)

angle cuts

fastleg

40

1

2

3

11.13

TILE LEVELLING SYSTEM

CARAT-TILE LEVELLING SYSTEM•foreasy,fastandperfectplacementof(large)tiles•idealforwallandfloortiles•basickitconsistsof1setofclamppliers,100strips,100clamps and comes in a bucket


complete set BTNSSET000

ACCESSOIRES


pack of 100 strips BTNS010000pack of 100 clamps BTNS020000clamp pliers BTNS030000

voor

na

41

11.13

CARAT MIXER

compulsion mixer

easy to fill

MIXER 50 SUPER•forperfectandhomogeneousmixingoftileglue,cement,paint,varnish,

epoxy resin, gravel floors etc•thethermalprotectionpreventsthemotorfromoverheating•themixeriseasytotransport,evenwhenthebucketisfull•canbedisassembledintothreeparts,sothemixertakesuplessstorageor

transport space

technical details

engine : 1.2kW (1.6hp)voltage : 230Vcontents of bucket : 65 litresmaximum mixing capacity : 50 kgweight : 24 kgorder number : BUI005S000

42

11.13


EASY-COUP 350•durablehightechaluminiumconstruction•cuttingheadwithdoublefunction:up/downandforward/backward

technical details

engine : 1.8 kW (2.5hp)voltage : 230 VØ diamond blade : 350 x 25.40 mmmax. material thickness : 10.5 cm max. cutting length : 20.0 cmweight : 28.5 kgorder number : BUC3500000

sawing blades for this machines page

universal / various stone materials : 6concrete / hard stone materials : 10brick : 13

dust extraction

adjustablewater

sliding compound

extra handle

43

11.13


S-COUP 350•mansorysaw,idealforthebuildingsector•straightcutsofbricks,stones,concreteblocks•slidingworkingtableandtiltingcuttinghead•pumpforwaterrecycling

technical details

engine : 2.2kW (3.0hp)voltage : 230VØ diamond blade : 350 x 25.40 mmmax. material thickness : 11 cmmax. cutting length : 80 cmweight : 67 kgbestelnummer : BEG3500000



foldable transport wheels

cutting trolley with 6 ball bearing wheels

spray system

adjustableheight

44

11.13


laser instrument

adjustableslidingcompound


fastleg

T-3510 LASER•mansorysaw,idealforthebuildingsector•suitableforstraightand45ºanglecutsofbricks,stonesandconcrete

blocks•slidingworkingtableandtiltingcuttinghead•adjustablelegs•pumpforwaterrecycling

technical details T3510 T3510 Laser

engine 2,2kw (3,0pk) 2,2kw (3,0pk)voltage 230V 230VØ diamond blade 350 x 25,40 mm 350 x 25,40 mmmax. material thickness 90° 11 cm 11 cm 45° 8 cm 8 cmmax. cutting length 80 cm 80 cmweight 68 kg 68 kglaser instrument no yeswheel kit no yesorder number BT3510B000 BT3510L00



45

11.13


T-4010 LASER•mansorysaw,idealforthebuildingsector•suitableforstraightcutsofbricks,stonesandconcreteblocks•slidingworkingtableandtiltingcuttinghead•adjustablelegs•pumpforwaterrecycling


engine 2,8kw (3,8pk) 2,8kw (3,8pk)voltage 230V 230VØ diamond blade 400 x 25,40 mm 400 x 25,40 mmmax. material thickness 13,5 cm 13,5 cmmax. cutting length 80 cm 80 cmweight 68 kg 73 kglaser instrument no yeswheel kit no yesorder number BT40100000 BT4010L000



laser instrument


greater blade depth

fastleg

46

fastleg

11.13




engine 3.5kw (4,5pk) 4,0kw (5,5pk)voltage 230V 400VØ diamond blade 500 x 25,40 mm 500 x 25,40 mmmax. material thickness 17 cm 17 cmmax. material thickness 23 cm 23 cm (2 ways)max. cutting length 75 cm 75 cmweight 80,0 kg 80,0 kglaser instrument no yeswheel kit no yesorder number BT50100230 BT5010L000



laser instrument


greater blade depth

11.13

47

fastleg

11.13



technical details

engine : 4kW (5,5pk)voltage : 400VØ diamond blade : 600 x 25,40 mmmax. material thickness : 22 cmmax. material thickness (2 ways) : 28 cmmax. cutting length : 75 cmweight : 80,0 kgtransport dimensions L x W x H : 120 x 80 x 110 cmorder number : BT6010L000



laser instrument


greater blade depth

48

fastleg

11.13


T-7010 and P-7010 LASER•stonesawidealforcuttingbricks,porotonblocks,marbleblocks

technical details T-7010 P-7010

engine 4,0kW (5,5pk) 4,0kW (5,5pk)voltage 400V 400VØ diamond blade 700 x 25,40 mm 700 x 25,40 mmmax. material thickness 27 cm 27 cmmax. material thickness(2 ways) 34 cmmax. cutting length 55 cm 62 cmweight 95 kg 117 kglaser instrument no yesorder number BT7010000 BP7010000

sawing blades for this machines pagina


greater blade depth


laser instrument

49

11.13

CARAT WALL SAW MACHINES

WALL SAW MACHINES LASER DUSTECfor use with water cooling or with dust extraction•ideallysuitedforsawingrecessesinbrickandconcretewalls•thesawremainsenclosedduringsawing,sonodustandwaterisflying

around•sawsfastandpreciselytothemillimetreinstoneandconcrete•magnesiumsawingcover:lightandyetverystrong•includesaluminiumprotectioncasewithtrolley

technical details

engine : 2,1kW (2,8pk)voltage : 230V

W-3011 W-3510

Ø diamond blade 300 x 30,00 mm 350 x 25,40 mmmax. depth of cut 11,5 cm 14,0 cmweight 9,7 kg 10,8 kgorder number MZWB3011L0 MZWB3511LO



water flow control

laser instrument

PRCD switch

3 spirit levels

50

CARAT WALL SAW MACHINES

W-5421 WALL SAW MACHINE For sawing up to 21 cm into concrete•workswithnormal230V electric supply•withPRCDswitch•includingguiderails,fillerplates,Ø350,450and540mmsawingblades

and transport cases

technical details

engine : 2,2kW (2,8pk)voltage : 230Vmax. Ø diamond blade : 540 x 30,00 mmmax. material thickness : 21,0 cmweight : 14,6 kgorder number : MZW5421SET

accessories for this machine order number

guide rail 1.3 m : MZW5421130guide rail 2.3 m : MZW5421230

concrete sawing blades for this machine order number

Ø 350 x 30,00 mm CWB3505000Ø 450 x 30,00 mm CWB4505000Ø 540 x 30,00 mm CWB5405000

machine on rail

complete kit

11.13

51

11.13

CARAT SLOTS SAW MACHINES

SL-1252 DUSTEC®

•minimaldustgenerationduetospecialsawingcover•fittedwithshaftlocktoeasilyswapblades•includesaluminiumprotectioncase

technical details

engine : 1,4kW (1,9pk)voltage : 230VØ sawing blades : 125 x 22,23 mmmax. depth of blade : 27 mmwidth of blade : 13 - 40 mmweight : 4,5 kgorder number : MZSL12520S


universal / various stone materials : 3 – 4concrete / hard stone materials : 6 - 7brick : 9

dust extraction

adjustablewidthofblade

maximum depth of blade

adjustabledepthofblade

52

11.13

CARAT SLOTS SAW MACHINES

SL-1502 DUSTEC® •sawsextremelydeep•minimaldustgenerationduetospecialsawingcover•includesaluminiumprotectioncase

technical details

engine : 2,0kW (2,7pk)voltage : 230VØ sawing blades : 150 x 22,23 mmmax. depth of blade : 50 mmwidth of blade : 7 - 50 mmweight : 6,5 kgorder number : MZSLB15020


universal / various stone materials : 3 – 4concrete / hard stone materials : 6 - 7brick : 9

laser instrument

dust extraction

adjustablesawing50mm

maximum depth of blade

53

11.13

CARAT CONCRETE GRINDER

BS-1252 DUSTEC®

•forthedust-freeremovalofmouldingandconcreteremnantsandlevellingof floors and walls

•fittedwithshaftlockforeasilyswappingGRINDINGCUPS•removingalayerresultsinawellfinishedsurface,readyforfurther

finishing•includesaluminiumprotectioncase

technical details

engine : 14kW (1,9pk)voltage : 230VØ grinding cup : 125 mmweight : 4,5 kgorder number : MZBS125200

GRINDING CUPS for this machine page

concrete : 21, 22 and 23brick / asphalt : 23

working against a wall

dust extraction

brushes in the cover

54

11.13

VACUUM CLEANERS

VACUUM CLEANER BBN-1•speciallydevelopedforconstructiondustandharmfulquartzdust•therealconstructionvacuumcleanerwithanexceptionallystrong

structofoam construction and 4 heavy duty castor wheels•additionalpowerconnectionwithautomaticstart/stop•testedandapproved(b-label)byTNO

technical details

engine : 1,2kW voltage : 230Vcontent of container : 23 litresØ hose : 50 mmweight : 16,5 kgorder number : BBN1000000

dust hose Ø 50 mm

55

11.13

VACUUM CLEANERS

ST-300 WATER- / VACUUM CLEANER•workingwetordrywithouttheneedtochangethefilter•heavydutyvacuumcleanerforgeneralwork

ST-200 H-CLASS VACUUM CLEANER•speciallydesignedforconstructiondustandharmfulquartzdust•uniquefiltersystemforoptimalworkingcomfort•additionalpowerconnectionwithautomaticstart/stop

technical details ST-300 ST200

engine : 1.2kW 1.1kWvoltage : 230V 230Vcontent of container : 50 litres 16 litresØ hose : 40 mm 50 mmweight : 12 kg 15 kgorder number : BBR3000000 BBR2000000

56

CUT-OFF GRINDERS

SOLO CUT-OFF GRINDERS 880• Anairfilterthatalmostcleansitself: multi-stage air filter system with patented twin-pipe-interceptor;

pre separation airbox with two suction pipes creates air pulsion that blows out air on the suction pipes; only pre-filtered air will reach the paper segments of the main filter; by turning an external rocker wheel, vibrations shake remaining impurities from the air filter

• Ergonomicadvantages: optimum weight distribution, compact design, anti-vibration system with

steel springs, rubber covered handles, tank caps with protection against over-tightening

• Startinghasneverbeeneasier: no manual choke, no half-throttle button; switch on 1, press primer and

decompression valve and start; onepush-stop-system, engine is prepared forrenewedoperationwithoutfurtheradjustments

technical details 880/14

engine : 3,3kW (4,5pk)content of : 81 cm³fuel : 2-stroke oilØ diamond blade : 350 x 20,00 mmmax. depth of blade : 125 mmweight : 10,4 kgorder number : KS88000000


universal / various stone materials : 6concrete / hard stone materials : 10brick / asphalt : 13

ACCESSORIES


steel water pressure tank (10 litres) KDDW220000

semi-automatic tensioning system

magnesium cover

11.13

57

CUT-OFF GRINDERS

SOLO DOORSLIJPER 881 i-LUBE• Difficultandcumbersomemixingoffuelandoilatthepointofoperationisnolongernecessaryandpossiblefuelmixproblemsareprevented

• Anairfilterthatalmostcleansitself: multi-stage air filter system with patented twin-pipe-interceptor;

pre separation airbox with two suction pipes creates air pulsion that blows out air on the suction pipes; only pre-filtered air will reach the paper segments of the main filter; by turning an external rocker wheel, vibrations shake remaining impurities from the air filter

• Ergonomicadvantages: optimum weight distribution, compact design, anti-vibration system with

steel springs, rubber covered handles, tank caps with protection against over-tightening

• Startinghasneverbeeneasier: no manual choke, no half-throttle button; switch on 1, press primer and

decompression valve and start; onepush-stop-system, engine is prepared forrenewedoperationwithoutfurtheradjustments

technical details 881/14

engine : 3,3kW (4,5pk)content of : 81 cm³fuel : 2-stroke oilØ Diamond blade : 350 x 20,00 mmmax. depth of blade : 125 mmweight : 10,5 kgorder number : KS88100000


universal / various stone materials : 6concrete / hard stone materials : 10brick / asphalt : 13

simple starting setup

separate fuel reservoir

semi-automatic tensioning system

11.13

58

11.13

CARAT FLOOR SAWING MACHINE

CARAT FLOOR SAW MACHINE VZ-450•sawingbladecanbemountedontheright.•sawingdepthindicator.•cycloneairfilter,especiallyfordrycutting.•highqualitybearings.•fittedwithHondamotortypeGX390.

technical details

motor : Honda fuelengine : 9.65 kW (13.0hp)max. Ø blade : 450 x 25.40 mmmax. depth of blade : 170 mmweight : 106 kgorder number : RVZ45000000

sawing blades for this machine Page

concrete : 10asphalt : 13

adjustablepushbarheight

detachable 20 litres water tank

59

CHAINSAWS

• ICSsawsaredesignedfortheharchenvironmentofconcretecutting while delivering the unique ability to outsquare corners with no over cuts, deep plunge cuts and small precision openings

• toensureproperoperation,theuseofwaterisrequired

ICS CHAINSAW, type 680GC•packagewithguidebaranduniversalchain

technical details

engine : 5,6 pkcontent of : 77 cm³ fuel : 2-stroke oilmax. depth of cut : 30 cmweight : 9,6 kgorder number : KIBM680000

CHAINS / SWORD for ICS 680GC


chain concrete premium 30 cm KIBKC30000chain abrasive 30 cm KIBKA30000chain universal 30 cm KIBKE30000sword 30 cm KIBZO30000

11.13

60

CHAINSAWS

ICS CHAINSAW, type 695GC•packagewithguidebaranduniversalchain

technical details 695GC-35 695GC-40

engine : 6,4 pk 6,4 pkcontent of : 94 cm³ 94 cm³ fuel : 2-stroke oil 2-stroke oilmax. depth of cut : 35 cm 40 cmweight : 9,6 kg 9,6 kgorder number : KIBM695GP0 KIBM695GP1

CHAINS / SWORD for ICS 695GC


chain concrete premium 35 cm KIBKC35000chain abrasive 35 cm KIBKA35000chain universal 35 cm KIBKE35000sword 35 cm KKBZO35000chain concrete premium 40 cm KBKC40000chain abrasive 40 cm KIBKA40000chain universal 40 cm KIBKE40000sword 40 cm KKBZO40000

ACCESSORIES for 680GC + 695GC (35 + 40CM)


drive sprocket (fits 633, 680 and XICS709490 and 695 petrol saws)2-stroke oil (6 x 200 ml) KIBO613000

11.13

61

CHAINSAWS

ICS CHAINSAW, type 880F4•packagewith38cmguidebar,universalchainandcarrycase

technical details

hydraulic : 30 l/minmax. depth of cut : 25 cm, 38 cm, 50 cm or 63 cmweight : 12 kgorder number : KIBM880F40 (38 cm)

CHAINS / SWORD for ICS 880F4


chain concrete/natural stone KIBHKCL380 high efficiency 38 cmchain concrete KIBHKCS380 high speed 38 cm chain abrasive 38 cm KIBHKA0380chain universal 38 cm KIBHKE0380sword 38 cm KIBHZ00380

ICS PORTABLE HYDRAULIC POWER

technical details

engine : 13,5 kW (18pk)fuel : gasolineadjustable to : 20 l/m or 30 l/morder number : KPOWERPACKdelivered with hydraulic hose set 7,5 m

11.13

DIAMOND DRILLSCHOOSING THE RIGHT DIAMOND DRILL 63

CHOOSING THE RIGHT DRILL ADAPTER FOR WET DRILLING 64

FOR CONCRETE AND HARD STONE MATERIALS 65

ACCESSORIES FOR PREMIUM AND STANDARD DIAMOND DRILLS 69

CHOOSING THE RIGHT DRILL ADAPTER FOR DRY DRILLING 70

FOR WALL SOCKETS 71

FOR BRICK AND ABRASIVE TYPES OF STONE 72

FOR TILES AND NATURAL STONE 78

63

1

2

CHOOSING THE RIGHT DIAMOND DRILL

What material?The Carat range of diamond drills is subdivided into 2 categories:

For use with water cooling: CONCRETE, HARD STONE MATERIALSEspecially developed for drilling in (reinforced) concrete and all other hard to very hard types (natural) of stone.

For use without water cooling:BRICK, ABRASIVE TYPES OF STONEEspecially developed for drilling in all abrasive, sandy types of stone.

What quality?The amount of diamonds mentioned near the diamond drill indicates the quality level. The more diamonds in the bar, the higher the quality and the performance.

PREMIUM

STANDARD

ECONOMY

drill speed

performance

Characteristics diamond drill

LASER

Laser welded: The segments are mounted on to the corrugated drill and have a 100% warranty against tooth breakage.

TT-segments: Segments with a revolutionary corrugated point. These guarantee swift traction on the drilled material.

Dustec® version with slots in the flange for use with Dustec® dust extraction.

Two questions are central when choosing the right diamond drill:

64

CARAT WET DRILLING WITH M16 CONNECTION







Drill machine with1/2”G connection

Drill machine with5/4”UNC connection

Drill machine withSDS-DI connection

ES00400000

ES00500000

ES00410000

ES00510000

ES00460000

ES00560000

CHOOSING THE RIGHT DRILL ADAPTER FOR WET DRILLING

65

40.08.13

DIAMOND DRILL FOR CONCRETE AND HARD STONE MATERIALS

STANDARD LASER•otherdiametersandlengthsavailableonrequest

11,5

LASER

PREMIUM LASER•otherdiametersandlengthsavailableonrequest

11,5

LASER

Connection M16

Ø mm length order number order number

8 100 EP00810040 10 150 EP01015040 12 150 EP01215040 14 200 ES01420040 EP01420040 14 300 ES01430040 EP01430040 16 200 ES01620040 EP01620040 16 300 ES01630040 EP01630040 18 300 ES01830040 EP01830040 20 300 ES02030040 EP02030040 22 300 ES02230040 EP02230040 24 300 ES02430040 EP02430040 25 300 ES02530040 EP02530040 26 300 ES02630040 EP02630040 28 300 ES02830040 EP02830040 29 300 ES02930040 EP02930040 31 300 ES03130040 EP03130040 31 400 ES03140040 EP03140040 36 300 ES03630040 EP03630040 36 400 ES03640040 EP03640040 41 300 ES04130040 EP04130040 41 400 ES04140040 EP04140040

PREMIUM

STANDARD

PREMIUMSTANDARD

66

11.13


Connection M30


46 300 ES04630050 EP04630050 46 400 ES04640050 EP04640050 51 300 ES05130050 EP05130050 51 400 ES05140050 EP05140050 56 300 ES05630050 EP05630050 56 400 ES05640050 EP05640050 61 300 ES06130050 EP06130050 61 400 ES06140050 EP06140050 66 300 ES06630050 EP06630050 66 400 ES06640050 EP06640050 71 300 ES07130050 EP07130050 71 400 ES07140050 EP07140050 76 300 ES07630050 EP07630050 76 400 ES07640050 EP07640050 81 300 ES08130050 EP08130050 81 400 ES08140050 EP08140050 86 300 ES08630050 EP08630050 86 400 ES08640050 EP08640050 91 300 ES09130050 EP09130050 91 400 ES09140050 EP09140050 96 400 EP09640050 101 300 ES10130050 EP10130050 101 400 ES10140050 EP10140050 111 300 ES11130050 EP11130050 111 400 ES11140050 EP11140050 121 300 ES12130050 EP12130050 121 400 ES12140050 EP12140050 126 300 ES12630050 EP12630050 126 400 ES12640050 EP12640050 131 300 ES13130050 EP13130050 131 400 ES13140050 EP13140050 141 400 ES14140050 EP14140050 151 400 ES15140050 EP15140050 161 400 ES16140050 EP16140050 171 400 ES17140050 EP17140050 181 400 ES18140050 EP18140050 201 400 ES20140050 EP20140050

PREMIUM

STANDARD

PREMIUMSTANDARD

67

11.13


Connection 5/4 ‘UNC•silversoldered

7

STANDARD PREMIUM


220 400 ES22040020 EP22040020 250 400 ES25040020 EP25040020 275 400 ES27540020 EP27540020 300 400 ES30040020 EP30040020 350 400 ES35040020 EP40040020 400 400 ES40040020 EP05640050 450 400 ES45040020 EP45040020 500 400 ES50040020 EP50040020 550 400 ES55040020 EP55040020 600 400 ES60040020 EP60040020

PREMIUM

STANDARD

68

11.13


DIAMOND DRILL ECONOMY

9

LASER

fixed connection 1/2’GØ mm length order number

31 300 ER03130010 36 300 ER03630010 41 300 ER04130010 51 400 ER05140010 61 400 ER06140010 71 400 ER07140010 76 400 ER07640010 81 400 ER08140010 91 400 ER09140010 101 400 ER10140010 111 400 ER11140010 121 400 ER12140010 131 400 ER13140010

ECONOMY

fixed connection 5/4’UNCØ mm length order number

51 400 ER05140020 61 400 ER06140020 71 400 ER07140020 76 400 ER07640020 81 400 ER08140020 91 400 ER09140020 101 400 ER10140020 111 400 ER11140020 121 400 ER12140020 131 400 ER13140020 151 400 ER15140020 171 400 ER17140020 200 400 ER20040020

ECONOMY

69

11.13

ACCESSORIES FOR PREMIUM AND STANDARD DIAMOND DRILLS

ADAPTERS SCREW THREAD M16


1/2’G ES004000005/4’UNC ES00410000SDS-DI ES00460000M18 ES00430000

ADAPTERS SCREW THREAD M30


1/2’G ES005000005/4’UNC ES00510000SDS-DI ES00560000M18 ES00530000M30 (ext) x M16 (int) HDND010000

EXTENSIONS•extensionsforuse1/2”G:minimumdrilldiameter31mm•extensionsforuse1¼”UNC:minimumdrilldiameter51mm

length mm machine connection order number

100 1/2’G BC21100000200 1/2’G BC21200000300 1/2’G BC21000000100 5/4’UNC BC22010000200 5/4’UNC BC22020000300 5/4’UNC BC22000000400 5/4’UNC BC22040000

REDUCERS


1/2 - 5/4 (ext) BC020000001/2 - 5/4 (int) BC01000000

70

HD01000000(including centring drill)


HDC2010000(including centring drill)

HDC0010000(excluding centring drill)





LENGTH60 MM

LENGTH150 MM

LENGTH340 MM

LENGTH60 MM

LENGTH150 MM

LENGTH340 MM

LENGTH60 MM

LENGTH150 MM

LENGTH340 MM

HD03000000

HD03010000

HT03400000

HT03400000

HT03400000

HT01500000

CHOOSING THE RIGHT DRILL ADAPTER FOR DRY DRILLING

Drill machine with 13mm drill chuck

Drill machine with SDS-drill chuck

Drill machine with 5/8”x16UNF-shaft




HD03000000

HD03000000

HD03010000

HT01500000

CARAT BOX DRILL, Ø 82 mm•M16ScrewthreadforuseonmountingspindleandDustec® drill chucks.•Usefuldrilllength:60mm.•Laserwelded,100%warrantyagainsttoothbreakage.

BOX DRILL DUSTEC® SUPER

Amount of TT-segments Segment height Order number

5 9,5 mm HTS082604S

BOX DRILL DUSTEC® PREMIUM


4 9,5 mm HTS082604P

BOX DRILL DUSTEC® ECONOMY


4 7 mm HTS082604E

BOX DRILL NASTROC®, M30


4 9,5 mm HDN0820605

BOX DRILL BRILLIANT•20specialTTgripsegmentsforsuperfastdrillingandforvery easy traction.•Lessfrictionduetothinnerdrilltube.


20 9 mm HTB0826040

71

11.13

DIAMOND DRILL FOR WALL SOCKETS

72

11.13

CARAT DRY DRILLING, length 60 mm x M16 LASER

Ø mm amount of segments order number

32 3 HDND03260442 3 HDND04260452 3 HDND05260462 3 HDND062604

CARAT BOX DRILL DUSTEC®, length 60 mm x M16


68 3 HTS068604072 4 HTS072604076 4 HTS076604082 4 HTS0826040 92 4 HTS0926040

102 5 HTS1026040 112 5 HTS1126040 122 6 HTS1226040 132 6 HTS1326040 142 5 HTS1426040152 6 HTS1526040162 7 HTS1626040

MOUNTING SPINDLES M16 with centring drill, for box drillsFOR 13 MM DRILL CHUCK


with taper drift HD01000000with quick swap system HD01010000

FOR SDS-PLUS SYSTEM


with taper drift HD01600000with quick swap system HD01610000

CENTRING DRILL set of 2


Ø 7 mm for use with taper drift HD03000200Ø 8 mm for use with quick swap system HD03010200

DIAMOND DRILL FOR BRICK AND ABRASIVE TYPES OF STONE

73

11.13

CARAT DRY DRILLING, length 60 mm x M16•withFastipsegments•withslotsontheside

9,5

LASER


32 3 HDC032150442 3 HDC042150452 3 HDC052150462 3 HDC0621504

CARAT DROOGBOREN DUSTEC®, lengte 150 mm x M16•withslotsintheflangeforusewithDustec®dustextraction

9,5

LASER


68 3 HTM068150472 4 HTM072150482 4 HTM082150492 4 HTM0921504

102 5 HTM1021504112 5 HTM1121504122 6 HTM1221504132 6 HTM1321504142 6 HTM1421504152 6 HTM1521504162 7 HTM1621504

MOUNTING SPINDLES M16with centred pin for dry drilling length 150 mm

order number

For 13 mm drill chuck HDC2010000For SDS-plus drill chuck HDC2060000For shaft 5/8”x16UNF HDC2020000


74

11.13

CARAT DRY DRILLING DUSTEC®, length 340 mm x M16•withslotsintheflangeforusewithDustec® dust extraction

9,5

LASER


68 3 HTL068340472 4 HTL072340482 4 HTL082340492 4 HTL0923404

102 5 HTL1023404112 5 HTL1123404122 6 HTL1223404132 6 HTL1323404142 6 HTL1423404152 6 HTL1523404162 7 HTL1623404

DUSTEC® DRILL CHUCK

machine-connection order number

5/8’x 16UNF ANT0100000M18 x 2,5 ANT02000001/2’x 20UNF ANT030000013 mm drill chuck ANT0400000SDS plus ANT0500000M16 ANT06000001/2’G ANT0700000

DUSTEC® CENTRE PINS

length mm order number

60 HT00600000 150 HT01500000 340 HT03400000

See page 76 for support discs, which are best to use with centre pins.


75

11.13

CARAT DRY DRILLING NASTROC®, length 400 mm x M30•tobeusedincombinationwithA-2211andA-2212andadapterES051for

perfect dust exctraction during dry drilling

9,5

LASER


32 3 HDNL032405 42 3 HDNL042405 52 3 HDNL052405 62 3 HDNL062405 72 4 HDNL072405 82 4 HDNL082405 92 4 HDNL092405102 4 HDNL102405112 4 HDNL112405122 6 HDNL122405132 6 HDNL132405142 6 HDNL142405152 6 HDNL152405162 7 HDNL162405

ADAPTER SCREW THREAD M30


5/4’UNC ES00510000

See page 76 for support discs and centre pins.


76

11.13

SUPPORT DISCS for DUSTEC®

and NASTROC® centre pins

for diamond drill Ø mm order number

32 HDC3032000 42 HDC3042000 52 HDC3052000 62 HDC3062000 68 HDC3068000 72 HDC3072000 82 HDC3082000 92 HDC3092000 102 HDC3102000 112 HDC3112000 122 HDC3122000 132 HDC3132000 142 HDC3142000 152 HDC3152000 162 HDC3162000

CENTRE PIN


400 mm HDN0011000

Centre pins are best to be used with support discs.


77

11.13

DIAMOND DRILL KIT for BRICK AND LIMESTONE - ECONOMYThis kit, with 5 diamond drills (Ø 32, 52, 82, 112 and 132 mm) lets you drill the most commonly used holes in a simple manner. Easy to mount on drill motors with 13 mm- or SDS-drill chuck.The useful drill length of 150 mm can be extended to 300 mm with the enclosed extensions.


Kit complete HTESET0000

DIAMOND DRILLS

7

LASER


32 3 HTE032150452 3 HTE052150482 4 HTE0821504

112 5 HTE1121504132 6 HTE1321504

Accessories


Extension 245 mm, M16 x hexagon HD01000245Extension 245 mm, M16 x SDS-plus HD02600245Centre drill HD03000245


78

11.13

DIAMOND DRILL FOR TILES AND NATURAL STONE

DIAMOND DRILL KIT for dry use on cordless drill machines•kitwith4diamonddrills,Ø 6-8-10-12 mm, centre aid and dust extraction•drillsfittedwithhexagonsystemforoptimalgriponthedrillchuck•fittedwithwaxforgoodlubrication•deliveredinaluminiumprotectioncase


centre aid ETDSET0000centre aid and dust extraction ETDSET02NF

DIAMOND DRILLS

Ø mm drilling depth mm order number

6 30 ETD0060000 8 35 ETD0080000 10 35 ETD0100000 12 35 ETD0120000 14 35 ETD0140000 16 35 ETD0160000 18 35 ETD0180000 20 35 ETD0200000

Accessories


centre aid BCH0400000

79

11.13


DIAMOND DRILL KITS for dry use with angle grinders•drillsfittedwithM14connection•deliveredinaluminiumprotectioncase


kit with drill Ø 6-8-10-12-20-27-35 mm EHSSET04NFkit with drill Ø 20-27-35-55-72 mm EHSSET02NF

DIAMOND DRILLS


6 30 EHS00607068 30 EHS0080706

10 30 EHS010070612 30 EHS012070620 40 EHS0200706 27 40 EHS027070635 40 EHS035070640 40 EHS040070655 40 EHS055070668 40 EHS0680706 72 40 EHS0720706 82 40 EHS0820706

80

11.13


DIAMOND DRILL KITfor use with water cooling on cordless drill machines•kitwith3diamonddrills,Ø6-8-10-12-25-36mm,centreaidandwaterfed

drill head•drillsfittedwitha1/2”Gsystem•deliveredinaluminiumprotectioncase


set complete ETSET020NF

DIAMOND DRILLS


6 60 ET00607010 8 60 ET00807010 10 60 ET01007010 12 60 ET01207010 14 60 ET01407010 16 60 ET01607010 18 60 ET01807010 20 60 ET02007010 25 60 ET02507010 32 60 ET03207010 36 60 ET03607010 41 60 ET04107010 51 60 ET05107010

ACCESSOIRES


centre aid BCH0100000water fed drill head BB00BK4000

DRILL MACHINES AND DRILL STANDSCHOOSING THE RIGHT DRILL MACHINE 82HANDHELD DRILL MACHINES 83STANDS FOR HANDHELD DRILLING MACHINES 89DIAMOND DRILL SYSTEMS 93ACCESSORIES 96

234

82

CHOOSING THE RIGHT DRILL MACHINE

Four questions are central when choosing the right drill machine:

What material?The range of diamond drills is subdivided into 2 colours:Brick Use (with dust extraction) in brick and limestone.Concrete Use with water cooling in (reinforced) concrete and hard materials.In the table below you can select the most suitable drill machine.

1

Controtec is unique software that protects against electrical and mechanical overloading of the Carat drill motors.

Advantages of the Controtec:

•operatorcanseeandfeelwhenthemotoris overloaded•mechanicalslippingclutchisactivatedagreat

deal less•maximumtorqueavailableatanyspeed•fasterandmoreefficientdrillingprocess•fewerrepairandmaintenancecosts

drilling range Ø mm type see page power output speeds

handheld A-1801 70 1.8kW 1 handheld A-1801 71 1,8kW 1

handheld A-1811 72 1,8kW 2 with stand A-1811 76-79 1,8kW 2

handheld

A-2211 74

2,2kW 3

A-2212

with stand A-2211

2,2kW 3 A-2212

76-79

with stand AS-2512 80 2,5kW 3 with stand AS-3312 81 3,3kW 3

32 132 32 132

14 7014 120

14 70 32 16214 150 32 150

46 250 46 350

With or without water cooling?(in concrete, water cooling is always required)

Which diameters now and in the future?

Handheld or with drill stand?Is a combination of both desired?

83

11.13

CARAT HANDHELD DRILL MACHINES

A-1651 DIAMOND DRILL MACHINEfor use without water cooling•fittedwithControtec®

•withhighquality13mmdrillchuck.•includesaluminiumprotectioncase.•speciallydevelopedforuseincombinationwiththedrydrillkiton page 65 of this catalogue.

technical details

engine : 1.65kW (2.2hp)voltage : 230Vspeeds : 1RPM under load : 2.000 rpmdrill range handheld in brick : Ø 132 mmmachine connection : 5/8” x 16UNFweight : 4.5 kgorder number : AMB1651000

drills for this machine page

wall sockets : 71brick / abrasive types of stone : 77

professional drill chuck

spirit levels

84

11.13


A-1801 DIAMOND DRILL MACHINEfor dry use•1,8kWmotorand2speeds•fittedwithControtec®

•includingaluminiumprotectioncase

technical details

engine : 1,8kW (2,5pk)voltage : 230Vspeeds : 2RPM under load: 1st speed : 1000 rpm 2nd speed : 2600 rpmdrill range handheld in brick : Ø 162 mmmachine connection : 5/8’ x 16UNFweight : 5,2 kgorder number : AMB1801000


brick / abrasive types of stone : 71-75

85

11.13


1/2’G connection

2 mechanical speeds

Controtec®

water flow control

A-1811 DIAMOND DRILL MACHINEfor use with water cooling•includesaluminiumprotectioncaseandPRCDsafetyswitch.•theA-1811canbeusedwiththeS-1801,S-1803,S-1804andS-1805

stand (see pages 76, 77, 78 and 79).

technical details

engine : 1.8kW (2.5hp)voltage : 230Vspeeds : 2RPM under load : 1st speed : 1.000 rpm : 2nd speed : 2.600 rpmdrill range handheld in concrete : Ø 70 mmdrill range from stand in concrete : Ø 120 mmmachine connection : 1/2”Gweight : 5.2 kgorder number : AMB1811000

drills for this machine Page

concrete / hard stone materials : 65, 66, 68

86

11.13


A-2010 DIAMOND DRILL MACHINEfor use with water cooling

•overbelastingsindicatormetLED•includingaluminiumprotectioncase•theA-2010canbeusedwiththeS-1801,S-1802,S-1803,S-1804and

S-1805 (see pages 78, 79, 80 and 81)

technical details

engine : 2,0kW (2,7pk)voltage : 230Vspeeds : 3RPM under load: 1st speed : 450 rpm 2nd speed : 1050 rpm 3nd speed : 2000 rpmdrill range handheld in concrete : Ø 70 mm in brick : Ø 162 mmdrill range from stand in concrete : Ø 150 mm in brick : Ø 200 mmmachine connection : 1/2’Gweight : 6,2 kgorder number : AMB2010000


concrete / hard stone materials : 65, 66, 68

1/2’G connection

3 mechanical speeds

water flow control

professional switch with soft grip

Controtec®

87

11.13


A-2011/A-2012 DIAMOND DRILL MACHINESfor use with water cooling or with dust extraction•includingaluminiumprotectioncase•theA-2211andA-2212canbeusedwiththeS-1801,S-1802,S-1803,

S-1804 and S-1805 (see pages78, 79, 80 and 81)

technische gegevens

engine : 2,2kW (3pk)voltage : 230Vspeeds : 3RPM under load 1st speed : 450 rpm 2nd speed : 1050 rpm 3nd speed : 2000 rpmdrill range handheld in concrete : Ø 70 mm in brick : Ø 162 mmdrill range from stand in concrete : Ø 150 mm in brick : Ø 200 mmmachine connection : 1/2”G + 1 1/4”UNCweight : 6,7 kg

A-2211 A-2212

handle back handle pistol handleorder number AMB221100 AMB2212000

drills for these machines page

concrete / hard stone materials : 65, 66, 68brick / abrasive types of stone : 75

3 mechanical speeds

Controtec®

water flow control

professional switch with soft grip

Combinationshaft,1/2”G and11/4”IMC

A-2211

A-2212

88

11.13


DRILL SETCarathaspreparedafewsetscontainingadiamonddrillwiththe5best-sellingdrills(premiumlaserØ31,41,61,81and111mm).

PREMIUM

diamond drill drill set order number

A-2211 Premium AM2211STAR A-2212 Premium AM2212STAR

89

11.13

CARAT STANDS FOR HANDHELD DRILL MACHINES

S-1801 DRILL STAND•aluminiumstandwithadjustingboltsforpreciseadjustment.•controlhandlecanbemountedonbothsides.•adjustableguidance.

technical details

max. drill diameters : 130 mmmax. drill length : 450 mmØ clamping collar : 60 mmweight : 7,0 kgorder number : ASB1801000

centre arrow

spirit level in drill

compact foot

90

11.13


S-1802 AND S-1803 DRILL STAND•robuststandmadeofaluminiumwithtelescopicbuttress•controlhandlecanbemountedonbothsides•adjustableguidance•baseplatesuitedforuseofquickreleaseskewerorvacuumkit

technical details

max. drill diameters 90° : 150 mmmax. drill diameters 45° : 120 mmmax. drill length : 500 mmØ clamping collar : 60 mmweight : 8,5 kg

S-1802 S-1803

with back brace : no : yesorder number : ASB1802000 : ASB1803000

centre arrow

spirit level in drill

suitable for vacuum

can tilt without steps

91

11.13


S-1804 DRILL STAND•safeandfastdrillingofholesinsewagepipes•aluminiumconstructionwithpressuresprings

technical details

max. drill diameters : 250 mmmax. drill length : 300 mmØ clamping collar : 60 mmweight : 6,0 kgorder number : ASB1804000

92

11.13


S-1805 DRILL STAND•forfastandprofessionalceilingdrilling•integratedstampforfixingbetweenfloorandceilingwithacompressive

force of 1000 kg•includingwatercollectorring(useofwatervacuumisrequired)

technical details

max. drill length : 400 mmØ clamping collar : 60 mmworking height : van 2 to 2,9 metresweight : 31 kg

S-1805-150 S-1805-180

max. drill diameters : 150 mm : 180 mmorder number : ASB1805000 : ASB18050180

HORIZONTAL DRILL STAND for S-1805•accessoriesforsafeandcontrolledhorizontaldrilling•deliveredwithoutwatercollector

technische gegevens

max. drill diameters : 200 mmmax. drill length : 400 mmorder number : ASB1805HOR

locking

includes water collector ring

93

11.13

CARAT DIAMOND DRILL SYSTEMS

AS-2512 COMPLETE DRILL KIT•suitableforwatercooleddrillinginreinforcedconcrete•motorwiththreewayprotectionagainstoverloading

technical details

engine : 2,5kW (3,4pk)voltage : 230Vspeeds : 3RPM under load: 1st speed : 315 rpm 2nd speed : 655 rpm 3nd speed : 970 rpmdrill range from stand in concrete : Ø 250 mmmachine connection : 1⁄2”G + 1 1/4” UNCweight : 21,5 kgorder number : AMB2512000


concrete / hard stone materials : 56 - 57 - 58 - 59

Combinationshaft,1/2”G and11/4”UNC

3 mechanical speeds

stable base plate with wheels

centre arrow

94

11.13


AS-3312 COMPLETE DRILL KIT•suitableforwatercooleddrillinginreinforcedconcrete•motorwiththreewayprotectionagainstoverloading

technical details

engine : 3,3kW (4,5pk)voltage : 230Vspeeds : 3RPM under load: 1st speed : 230 rpm 2nd speed : 510 rpm 3nd speed : 730 rpmdrill range from stand in concrete : Ø 350 mmmachine connection : 5/4’ UNCweight : 32,0 kgorder number : ASB3312000


concrete / hard stone materials : 56 - 57 - 58 - 59

Controtec®

3 mechanical speeds

integrated wheels

reduction gear unit

95

11.13


S-3010 DRILL STAND•forfastandprofessionalfloor,wallorceilingdrilling•noanchoringrequired,ceilingjackintegratedinverticalcolumn•horizontalcolumncanberotated360degrees•drillingatanyangle•drillstandscanalsobeusedseparately

technical details

max. drill diameters : 350 mm (vertical) : 300 mm (at any angle)max. drill length : 1700 mm vertical : 500 mm horizontalworking height : van 2 to 3,5 metresweight : 46 kgorder number : ASB3010000

96

11.13

ACCESSORIES

WATER COLLECTOR RINGS, including 3 rubber covers


for drill stand S-1801 to Ø 130 mm BSW1801000for drill stands S-1802 and S-1803 to Ø 130 mm BSW1802000for drill stand S-2300 to Ø 180 mm BSW2300000for drill stand S-3000 to Ø 300 mm BSW3000000

REPLACE RUBBERS


replace rubber for BSW1801, BSW1802 BSW1801D00replace rubber BSW1805 150 mm BSW1805D00replace rubber BSW1805 180 mm BSW1805D20replace rubber for BSW2300 BSW2302D00

ACCESSORIES VACUUM KITfor drill stands S-1802, S-1803 and S-2300


vacuum pump complete BA04B00000vacuum connection BSV0000000rubber ring for S-1802/S-1803 BSV1802000rubber ring for S-2300 BSV2300000

PRESSURE TANK


steel water pressure tank (10 litres) KDDW220000

97

11.13

ACCESSORIES

MODULAR CEILING JACKfor drill stands S-1801, S-1802, S-1803 and S-2300


length from 1.70 m to 3.10 m BSS0000000

FILLING BLOCK S-2300 / S-3000Increases the maximum drill diameters by 50 mm

order number

BSVB000000

DUOCATCH•nodustnuisanceorwaterfloodingduringdrillingwithdiamond.•ismountedvacuumtoawallwitharegularvacuum/watercleaner.•alsoservesasacentreaidduetothe13enclosedcentrerings (Ø 32 to and with 152 mm).


Duocatch BDC0100000

MISCELLANEOUS


anchor set M12 including 50 anchors BA03A00000quick release skewer, wing nut and ring for anchor M12 BA03ZA000050 anchors M12 ZBA03B1200sharpening stone for sharpeningof diamond drill BH00000000

CONSTRUCTION MACHINESVIBRATORY PLATE 99MODULAR INTERNAL VIBRATORS 100VIBRATORY SCREED 101

99

11.13

CONSTRUCTION MACHINES

CARAT VIBRATORY PLATE TP400The Carat vibratory plate TP-400 is an extremely compact device for compaction of mixed soils in very confined spaces. The vibratory plate is particulary useful for the construction of paths, as well as horticulture and landscaping.

technical details

engine : 5,5 pkfuel : gasolineengine : Honda GX 160centrifugal force : 16.5 kNoperation width : 40 cmweight : 90,0 kgorder number : RTE1430-10

POLYURETHANE PLATE for vibratory plate TP-400order number : RATE124-10

100

11.13


CARAT MODULAR INTERNAL VIBRATORS•modularinternalvibratorsofferflexibilityandcost-effectiveness•theinternalvibratorsareindividuallyconfigurablewithdifferentflexible

shafts and vibrator heads

MOTORtechnical details

engine : 2.300W (3,0 pk)voltage : 230VRPM under load : 4.800 t/minweight : 4,5 kgorder number : RET2000000

VIBRATOR HEADS

Ø mm order number

25 RET325000040 RET340000048 RET348000058 RET3580000

FLEXIBLE SHAFTS

Ø mm length mm order number

25 1000 RET4251000 25 2000 RET4252000 25 3000 RET4253000 25 5000 RET4255000 38 - 58 1000 RET4381000 38 - 58 2000 RET4382000 38 - 58 3000 RET4383000 38 - 58 5000 RET4385000

101

11.13


VIBRATORY SCREED•whenfinishingconcretefloors,theCaratvibratoryscreedcarriesoutthree

working processes in one: spreading, screeding and compacting•easytooperate•extremelymobiledeviceconcept•suitableforallkindsofconcretebecausethecentrifugalforceisadjustable


Honda 4-stroke RFBH000000

carat product catalogue 2014

Documents

hard types of stone

range of carat diamond

diamond bladeschoosing

hard stone materialsideal

concrete tiles

abrasive types of stone

different types of stone

sawing fibre cement