catalog no. 1 - ekb kitchensmfg. by w.w. wood products inc. p.o. box 50 12140 main st. dudley, mo...
TRANSCRIPT
Catalog No. 1.5
Mfg. by W.W. Wood Products Inc.P.O. Box 50
12140 Main St.Dudley, MO 63936-0050
Phone: (573) 624-3526Order Placement Fax: (573) 624-6671Order Placement Email: [email protected] Service Email: [email protected]
Catalog No. 1.5
Index 1
Policies and Procedures A
Styles B
Upright Cabinets C
Wall Cabinets D
Base Cabinets E
Accessories F
Sales And Promotional Items G
SECTION INDEX
DESCRIPTION SECTION
Index 2
Angle Wall D3
Angle Wall No Door D3
Base 19 1/2” E1
Base 25 1/2”-37 1/2” E1
Base 3 Drawer E3
Base 4 Drawer E3
Base Mini 25 1/2”-31 1/2” E4
Base Mini Open Shelf 25 1/2”-31 1/2” E4
Base Mini Peninsula 25 1/2”-31 1/2” E4
Closet Rod F5
Color Sample Door G1
Edge-Banded Panel F3
Fillers F4
Jewelry Drawer Inserts F2
Pull Down Closet Rod F5
Pull Out Mirror F2
Tie Rack F1
Upright 3 Basket C19
Upright 3 Basket w/Upper Door 19 1/2” C20
Upright 3 Basket w/Upper Door 25 1/2” C21
Upright Angle Shelf Lower Door C38
Upright 4 Basket C19
Upright 4 Basket w/Upper Door 19 1/2” C22
Upright 4 Basket w/Upper Door 25 1/2” C23
Upright 5 Basket C24
Upright 5 Basket w/Upper Door 19 1/2” C25
Upright 5 Basket w/Upper Door 25 1/2” C26
Upright 6 Drawer w/Upper Door 19 1/2”
Upright 5 Drawer w/Upper Door 19 1/2”
Upright 4 Drawer w/Upper Door 19 1/2”
C17
C14
C12
Upright 5 Drawer w/Upper Door 25 1/2”-37 1/2”
Upright 4 Drawer w/Upper Door 25 1/2”-37 1/2”
C15
C13
Upright 6 Drawer
Upright 5 Drawer
Upright 4 Drawer
C16
C11
C11
CAW
CAWND
CB
CB
CB3DR
CB4DR
CBM
CBMOS
CBMP
CLR
SD
CEPS
CF
JDI
PDCR
PM
CTR
U3B
U3BD, U3BDG
U3BD, U3BDG
UASD
U4B
U4BD, U4BDG
U4BD, U4BDG
U5B
U5BD, U5BDG
U5BD, U5BDG
U6DR
U5DR
U4DR
U5DRD, U5DRDG
U4DRD, U4DRDG
U6DRD,U6DRDG
U5DRD, U5DRDG
U4DRD, U4DRDG
Bridge Shelf Kit F6CBSK
Case Connecting Screws F5CCS
Adjustable Shelves F4CAS
Base Full Height Door 19 1/2” E2CB-FHD
Base Full Height Door 25 1/2”-37 1/2” E2CB-FHD
Base Ironing Board 19 1/2” E3CBIB
1/4” Finished Panel F41/4FP
Belt Rack F1CBR
INDEX
DESCRIPTION PAGENOMENCLATURE
Index 3
Upright Hamper w/Upper Door 19 1/2” C33
Upright Hamper w/Upper Door 25 1/2” C34
Upright Hanger w/Pull Down Clothes Rod C6
Upright Ironing Board C37
Upright Lower Door 19 1/2” C27
Upright Lower Door 25 1/2”-37 1/2” C35
Upright Mid Hanger w/Upper Door 19 1/2” C2
Upright Mid Hanger w/Upper Door 25 1/2”-37 1/2” C3
Upright Panel F3
Upright Shelf & Shoe Shelf C8
Upright Shelf & Shoe Shelf w/Upper Door 19 1/2” C9
Upright Shelf & Shoe Shelf w/Upper Door 25 1/2”-37 1/2” C10
Upright Shelves C7
Upright Shoe Shelf C8
Upright Tall Hanger C1
Upright Tall Hanger w/Upper Door 19 1/2” C4
Upright Tall Hanger w/Upper Door 25 1/2”-37 1/2” C5
Valet Rod F1
Wall 19 1/2” D1
Wall 25 1/2”-37 1/2” D1
Wall No Door D2
Wall No Door w/Pull Down Clothes Rod D2
UHD,UHDG
UHD,UHDG
UHPDR
UIB
ULD
ULD
UMHD, UMHDG
UMHD, UMHDG
UPN, UPS, UPD
USSS
USSSD, USSSDG
USSSD, USSSDG
US
USS
UTH
UTHD, UTHDG
UTHD, UTHDG
CVR
CW
CW
CWND
CWPDR
Upright Pant Rack w/Upper Door 19 1/2” C28UPRD, UPRDG
Upright Pant Rack w/Upper Door 25 1/2”-31 1/2” C29UPRD, UPRDG
Upright Hamper C32UH
Upright Lower Door w/Upper Door 19 1/2” C30ULDD, ULDDG
Upright Lower Door w/Upper Door 25 1/2”-37 1/2” C31ULDD, ULDDG
Upright Mid Hanger C1UMH
Upright Double Hanger C7UDH
Upright Pant Rack C27UPR
INDEX
DESCRIPTION PAGENOMENCLATURE
Upright 6 Drawer w/Upper Door 25 1/2”-37 1/2” C18
Upright Angle Radius Shelf C36
Upright Angle Shelf C35
Upright Angle Shelf Lower Door w/Upper Door C39
U6DRD, U6DRDG
UAR
UAS
UASDD, UASDDG
EX 1
CLOSET EXAMPLES
CB4DR CB
UH
CLR
CLR
CBSK
CBSKCW
CEPS
UASD
UAR
UPSUPS
UPS
UTH
U6DR
EX 2
CLOSET EXAMPLES
CB4DRCB
CLR
U4DR
CLR
CLR
U3B
U4DR
CEPS
U5B
UPS
UPR
PM
JDI-A
CBSK
CBSK
EX 3
CLOSET EXAMPLES
CLR
CWND
UASD
CWPDR
UPS
UPS
UIBCWND
CBIB
CB3DR
CLR
USSSDG
CEPSUHPDR
U6DRDGCBSK
CBSK
EX 4
CLOSET EXAMPLES
CLR
UPN
CBSK
USS
USCBSK
CLR
USSS
CBSK
UPS
CTR
CBSK
U6DR
A1
Normal production time is four weeks. During peak periods, production time may take up to 5 weeks. Deliveries which are not on
regular delivery routes, may require delayed scheduling until a truck is routed to that area.
L E A D T I M E :
Monday through Friday 7:30 A.M. to 4:00 P. M. Central Standard time.
O F F I C E H O U R S :
All orders must be mailed, emailed or faxed (telephone orders will not be processed). A layout drawing is helpful, however W. W.
Wood Products Inc. does not check layout for accuracy. Detailed drawings of specialty cabinets are required for production. W. W.
Wood Products Inc. will be responsible for items listed on order form only.
O R D E R P L A C E M E N T :
Upon entry of your order you will receive by fax, or email, an order confi rmation. This confi rmation will state a tentative ship date in
the “Ship Date” section.
Seven to ten days prior to shipment, you will receive a shipping confi rmation by fax or email. This will list the specifi c week your
order will arrive.
Twenty-four hours prior to delivery, you will be contacted by the delivery driver. They will schedule a specifi c time of arrival for your
order.
D E L I V E R Y N O T I F I C A T I O N :
• Correct box abbreviation
• Layout
• Purchase order number
W E M U S T H A V E T H E F O L L O W I N G I N F O R M A T I O N T O P R O C E S S Y O U R O R D E R
The use of P.O. numbers, are required. A unique P.O. number must be used for each individual order. P.O. numbers must be 12 digits
or less. Each order processed has an original confi rmation number and it is the responsibility of our customers to review and verify
each order. W.W. Wood Products Inc. will not be responsible for the duplication of orders.
P U R C H A S E O R D E R N U M B E R :
After orders are entered for production, confi rmation will be faxed, or emailed to customers. “No Charge” order changes or
cancelations will be allowed for 24 hours from the time the original confi rmation was faxed, or emailed from our offi ce. After the
fi rst 24 hours (24-48 hours from original confi rmation), items that need to be changed or canceled must be canceled on the original
order and placed on a new order. There will be a 35% charge for each item requiring a change or cancellation. No part, or parts of the
canceled or changed cabinet will be shipped. Cancellations must be submitted in writing accompanied by signature of salesperson.
All cabinets are custom cabinets, and manufactured by individual orders. No changes or cancellations will be made after the 48 hour
waiting period.
C H A N G E O F O R D E R :
All prices listed in catalog are list. All up charges are on list prices before multiplier is applied.
P R I C I N G :
POLICIES & PROCEDURES
A2
G U A R A N T E E :
W.W. Wood Products Inc, manufacturer of Davanti Closets, guarantees its cabinets to remain free from defects in material and
workmanship under normal residential use, for a period of one year from date of purchase.
Within the warranty period, W.W. Wood Products agrees to repair, FOB its factory, or furnish without charge FOB its material or
workmanship within said period. All defective items must be returned to the factory before replacement or credit will be issued.
This warranty does not cover products that have had normal wear and tear, misuse, abuse, improper storage, improper installation,
exposure to extremes in temperature or humidity, cleaned improperly, or been changed or modifi ed. In addition, variations in color
and grain pattern are natural characteristics of wood and are not covered by this warranty.
In no event shall this warranty cover the cost of installation, removal, or replacement, subsequent damage to other products used in
conjunction with Davanti Closets.
This warranty is non-transferable and is in lieu of all other warranties, expressed or implied.
W.W. Wood Products Inc. reserves the right to discontinue models and/or make changes in price, material, equipment and
specifi cations at any time without written notice.
All accounts must complete proper credit information before open account is granted.
All accounts must complete a detailed location map to delivery location.
All accounts must provide proper tax exemption forms before a tax exempt status may be achieved.
All accounts must have an established line of credit and be in good standing to place order and receive merchandise. Standard terms
are net 10 days. Invoices overdue in excess of 15 calender days will result in automatic termination of open account status.
Shipping on catalog items delivered on W. W. Wood Products Inc. trucks, or dedicated carriers will be shipped at pricing listed in
catalog.
O F F I C E I N F O R M A T I O N :
I N V O I C I N G :
S H I P P I N G C H A R G E S :
General delivery will be via our truck.
When delivery to retail outlet via our truck, dealer must provide a representative to sign for and receive order. Delivery is
to tailgate only, and assistance is required unloading inside the truck due to weight. Any items signed for and accepted
become the responsibility of the buyer. Any damaged or missing items must be noted at time of delivery. If trucks are not
unloaded within a one hour window, a demurrage fee will be applied.
Available UPS items will have actual shipping charges added to the price of the order.
G E N E R A L D E L I V E R Y :
S H I P P I N G :
U P S :
POLICIES & PROCEDURES
A3
SPECIFICATIONS & CONSTRUCTION DETAILS
All shelves, unless otherwise specified are fully adjustable, full depth shelves. Adjustable shelves are constructed of 3/4” particleboard.
Davanti closet cabinets are not freestanding pieces of furniture. Follow industry standard practices for installing cabinet cases,
including, but not limited to: secure fastening directly to wall studs or similar permanent structures through hanging rails inside of
cabinet, using proper mounting hardware of adequate strength and length. For wood studs, we recommend #8 x 2 ½” low profile
washer head cabinet screws or similar. For metal, brick or concrete installation, consult an installation professional to identify the
proper fasteners. Failure to properly install cabinet cases could result in an unsafe tipping hazard or damage to cabinet and property.
S H E L V E S :
All drawer sides are 1/2” particle board mounted with precision steel ball bearing full extension side mount guides.
D R A W E R S / G U I D E S :
Cabinets are assembled using doweled construction. Side, top & bottom panels are 3/4” thick particle board.
C A B I N E T C O N S T R U C T I O N :
Metro slab doors are particle board, or MDF substrate.
D O O R S :
Hettich concealed hinges are 110° & self closing. All doors and drawer fronts have 1/8” reveal on left & right, 1/2” reveal top & bottom,
1/4” reveal between top of door and bottom of drawer, and 1/4” reveal between drawer fronts on drawer stacks.
H I N G E S :
H A R D W A R E :Decorative handles are 5/16” dia. 4” on center wire pulls. Handles are included on all applicable cabinetry. Handle finishes are Matte
Black, Oil Rubbed Bronze, Chrome, & Satin Nickel (available without handles, must specify). Multiple hardware options (finishes/no
handles) are not available on the same order, place on separate order forms.
I N S T A L L A T I O N
B1
UP CHARGEDESCRIPTION• door & drawer front material consists of 3/4” white thermally
fused laminated particleboard, with matching PVC edge banding
• cabinets are assembled using doweled construction. Side, top & bottom panels are 3/4” white melamine particleboard edge banded melamine with exterior color coordinated PVC edge banding
• 4” wide stretchers and nailers• 1/8” reveal on left & right edges of all doors and drawer fronts• 1/2” reveal at top and bottom of all cabinets• 1/4” reveal between drawer fronts on drawer stacks• 1/4” reveal between bottom of drawer and top of door
0%
MONTEREY
PALISADES UP CHARGEDESCRIPTION• door & drawer front material consist of 3/4” particle board
laminated with 45 gram embossed paper
• cabinets are assembled using doweled construction. Side, top & bottom panels are 3/4” 45 gram paper laminated particleboard, edge banded with exterior color coordinated PVC edge banding. Patterns are vertical and non grain matched
• 4” wide stretchers and nailers• 1/8” reveal on left & right edges of all doors and drawer fronts• 1/2” reveal at top and bottom of all cabinets• 1/4” reveal between drawer fronts on drawer stacks• 1/4” reveal between bottom of drawer and top of door
0%
VENTURA UP CHARGEDESCRIPTION• door & drawer front material consist of 3/4” particle board
laminated with 45 gram embossed paper
• cabinets are assembled using doweled construction. Side, top & bottom panels are 3/4” 45 gram paper laminated particleboard, edge banded with exterior color coordinated PVC edge banding. Pattern are vertical and non grain matched
• 4” wide stretchers and nailers• 1/8” reveal on left & right edges of all doors and drawer fronts• 1/2” reveal at top and bottom of all cabinets• 1/4” reveal between drawer fronts on drawer stacks• 1/4” reveal between bottom of drawer and top of door
0%
ALMEDA UP CHARGEDESCRIPTION• door & drawer front material consist of 3/4” particle board
laminated with 45 gram embossed paper
• cabinets are assembled using doweled construction. Side, top & bottom panels are 3/4” 45 gram paper laminated particleboard, edge banded with exterior color coordinated PVC edge banding. Patterns are vertical and non grain matched
• 4” wide stretchers and nailers• 1/8” reveal on left & right edges of all doors and drawer fronts• 1/2” reveal at top and bottom of all cabinets• 1/4” reveal between drawer fronts on drawer stacks• 1/4” reveal between bottom of drawer and top of door
0%
FINISHES & STYLES
Due to limitations in printing or changes in manufacturing, the fi nishes and products shown may not be accurately represented or are no longer available. Visit a retailer to view samples and confi rm availablity.
B2
FINISHES & STYLES
ENCINO
FOLKSTONE
UP CHARGE
UP CHARGE
DESCRIPTION
DESCRIPTION
• cabinets are assembled using doweled construction. Side, top & bottom panels are 3/4” 45 gram paper laminated particleboard, edge banded with exterior color coordinated PVC edge banding. Patterns are vertical and non grain matched
• cabinets are assembled using doweled construction. Side, top & bottom panels are 3/4” thermally fused laminated particleboard, edge banded with exterior color coordinated PVC edge banding.
• 4” wide stretchers and nailers• 1/8” reveal on left & right edges of all doors and drawer fronts• 1/2” reveal at top and bottom of all cabinets• 1/4” reveal between drawer fronts on drawer stacks• 1/4” reveal between bottom of drawer and top of door
• 4” wide stretchers and nailers• 1/8” reveal on left & right edges of all doors and drawer fronts• 1/2” reveal at top and bottom of all cabinets• 1/4” reveal between drawer fronts on drawer stacks• 1/4” reveal between bottom of drawer and top of door
0%
0%
• door & drawer front material consist of 3/4” particle board laminated with 45 gram embossed paper
• door & drawer front material consist of 3/4” particle board laminated with thermally fused laminate
PEPPERDUST UP CHARGEDESCRIPTION• door & drawer front material consist of 3/4” particle board
laminated with thermally fused laminate
• cabinets are assembled using doweled construction. Side, top & bottom panels are 3/4” thermally fused laminated particleboard, edge banded with exterior color coordinated PVC edge banding.
• 4” wide stretchers and nailers• 1/8” reveal on left & right edges of all doors and drawer fronts• 1/2” reveal at top and bottom of all cabinets• 1/4” reveal between drawer fronts on drawer stacks• 1/4” reveal between bottom of drawer and top of door
0%
COLUMBIA WALNUT UP CHARGEDESCRIPTION• door & drawer front material consist of 3/4” particle board
laminated with thermally fused laminate
• cabinets are assembled using doweled construction. Side, top & bottom panels are 3/4” thermally fused laminated particleboard, edge banded with exterior color coordinated PVC edge banding. Patterns are vertical.
• 4” wide stretchers and nailers• 1/8” reveal on left & right edges of all doors and drawer fronts• 1/2” reveal at top and bottom of all cabinets• 1/4” reveal between drawer fronts on drawer stacks• 1/4” reveal between bottom of drawer and top of door
0%
Due to limitations in printing or changes in manufacturing, the fi nishes and products shown may not be accurately represented or are no longer available. Visit a retailer to view samples and confi rm availablity.
B3
Aluminum Glass Frame Door Trim Up ChargeNatural Aluminum 250 per doorBlack Aluminum 250 per door
Brown Aluminum 250 per door
A L U M I N U M G L A S S F R A M E D O O R T R I M
FINISHES & STYLES
UP CHARGEDESCRIPTION• door & drawer front material consist of 3/4” particle board
laminated with thermally fused laminate
• 4” wide stretchers and nailers• 1/8” reveal on left & right edges of all doors and drawer fronts• 1/2” reveal at top and bottom of all cabinets• 1/4” reveal between drawer fronts on drawer stacks• 1/4” reveal between bottom of drawer and top of door
0%
NOCE MOSCATO
DARK NOCE UP CHARGEDESCRIPTION• door & drawer front material consist of 3/4” particle board
laminated with thermally fused laminate
Aluminum Glass Frame Door Trim is required with all Glass Frame Doors. Trim color is similar, but does not match handle hardware. See specifi c cabinet page for pricing.
• cabinets are assembled using doweled construction. Side, top & bottom panels are 3/4” thermally fused laminated particleboard, edge banded with exterior color coordinated PVC edge banding. Patterns are vertical.
• 4” wide stretchers and nailers• 1/8” reveal on left & right edges of all doors and drawer fronts• 1/2” reveal at top and bottom of all cabinets• 1/4” reveal between drawer fronts on drawer stacks• 1/4” reveal between bottom of drawer and top of door
0%
• cabinets are assembled using doweled construction. Side, top & bottom panels are 3/4” thermally fused laminated particleboard, edge banded with exterior color coordinated PVC edge banding. Patterns are vertical.
Due to limitations in printing or changes in manufacturing, the fi nishes and products shown may not be accurately represented or are no longer available. Visit a retailer to view samples and confi rm availablity.
B4
Decorative handles are 5/16” dia. 4” on center wire pulls. Handles are included on all applicable cabinetry (available without handles, must specify). Multiple hardware options (fi nishes/no handles) are not available on the same order, place on separate order forms.
4"
1 1/4"
Matte Black
Oil Rubbed Bronze
Chrome
Satin Nickel
0
0
0
0
FINISH
4"
1 1/4"
4"
1 1/4"
4"
1 1/4"
Decorative handles are 5/16” dia. 4” on center wire pulls. Handles are included on all applicable cabinetry (available without handles, must specify). Multiple hardware options (fi nishes/no handles) are not available on the same order, place on separate order forms.
Decorative handles are 5/16” dia. 4” on center wire pulls. Handles are included on all applicable cabinetry (available without handles, must specify). Multiple hardware options (fi nishes/no handles) are not available on the same order, place on separate order forms.
Decorative handles are 5/16” dia. 4” on center wire pulls. Handles are included on all applicable cabinetry (available without handles, must specify). Multiple hardware options (fi nishes/no handles) are not available on the same order, place on separate order forms.
H A R D W A R E
UP CHARGE
FINISHES & STYLES
C1
CLOSET UPRIGHTS
• 84”, 96” tall
• 19 1/2”, 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 1 adjustable full depth shelf in top section
• chrome closet rod in bottom section is adjustable within
system holes and is located 12 1/2” from back of cabinet
• bottom section 67 1/2” tall
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad point
5 mm bit and scrap block clamped, or held tightly to other side
(to prevent blowout), and mount rod bracket on exterior of
cabinet with system screws
U P R I G H T T A L L H A N G E R
• 84”, 96” tall
• 19 1/2”, 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section
• chrome closet rod in bottom section is adjustable within
system holes and is located 12 1/2” from back of cabinet
• bottom section 52 3/8” tall
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad point
5 mm bit and scrap block clamped, or held tightly to other side
(to prevent blowout), and mount rod bracket on exterior of
cabinet with system screws
U P R I G H T M I D H A N G E R19 1/2", 25 1/2", 31 1/2", 37 1/2"
83 7/8"95 1/4"
52 3/8"
31 1/2"42 7/8"
Fixed Shelf
Fixed Shelf
19 1/2", 25 1/2", 31 1/2", 37 1/2"
Fixed Shelf
Fixed Shelf
16 3/8"27 3/4"
67 1/2"
83 7/8"95 1/4"
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
UMH19 1/2 441412UMH25 1/2 495464UMH31 1/2 515 549UMH37 1/2 603566
UMH19 1/2 526
650
490
602UMH25 1/2 614
712
549
668UMH31 1/2UMH37 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
UTH19 1/2 420
519485
392UTH25 1/2 470
568
438
531UTH31 1/2UTH37 1/2
UTH19 1/2 500
615
459
570UTH25 1/2 556
667
517
623UTH31 1/2UTH37 1/2
C2
CLOSET UPRIGHTS
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/1 door
• chrome closet rod in bottom section is adjustable within system
holes, and is located 12 1/2” from back of cabinet
• bottom section 52 3/8” tall
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad
• point 5 mm bit and scrap block clamped or held tightly to other
side (to prevent blowout), and mount rod bracket on exterior of
cabinet with system screws
• glass frame doors will include aluminum glass frame door trim.
See page B3
U P R I G H T M I D H A N G E R W / U P P E R D O O R 1 9 1/2”
19 1/2"
83 7/8"95 1/4"
52 3/8"
31 1/2"42 7/8"
Fixed Shelf
31 3/16"42 9/16"
Fixed Shelf
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
UMHD19 1/2 506
756
460
710UMHDG19 1/2
UMHD19 1/2 591
841
537
787UMHDG19 1/2
15” DeepWith Glass Frame Upper Doors
21” DeepWidth 84” T 96” T Width 84” T 96” T
U P R I G H T M I D H A N G E R W / U P P E R D O O R 2 5 1/2”- 3 7 1/2”
25 1/2", 31 1/2", 37 1/2"
83 7/8"95 1/4"
52 3/8"
31 1/2"42 7/8"
Fixed Shelf
Fixed Shelf
31 3/16"42 9/16"
• 84”, 96” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/2 doors
• chrome closet rod in bottom section is adjustable
within system holes, and is located 12 1/2” from back
of cabinet
• bottom section 52 3/8” tall
• for rod mounts on exterior of cabinet, slowly drill
holes through existing interior system holes with a
sharp brad point 5 mm bit and scrap block clamped
or held tightly to other side (to prevent blowout), and
mount rod bracket on exterior of cabinet with system
screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
15” Deep 21” DeepWidth 84” T
580 667
96” T
636 737
Width 84” T 96” TUMHD25 1/2 571 690
701 811
520 605
639 741UMHD311/2UMHD37 1/2
UMHD25 1/2UMHD31 1/2UMHD37 1/2
15” DeepWith Glass Frame Upper Doors
21” DeepWidth 84” T
1080 1167
96” T
1136 1237
Width 84” T 96” TUMHDG25 1/2 1071 1190
1201 1311
1020 1105
1139 1241UMHDG311/2UMHDG37 1/2
UMHDG25 1/2UMHDG31 1/2UMHDG37 1/2
C3
CLOSET UPRIGHTS
C4
U P R I G H T T A L L H A N G E R W / U P P E R D O O R 1 9 1/2”
19 1/2"
Fixed Shelf
Fixed Shelf
16 3/8"27 3/4"
67 1/2"
83 7/8"95 1/4"
16 1/16"27 7/16"
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 1 adjustable full depth shelf in top section w/1 door
• chrome closet rod in bottom section is adjustable within system
holes, and is located 12 1/2” from back of cabinet
• bottom section 67 1/2” tall
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad point 5 mm bit
and scrap block clamped or held tightly to other side (to prevent
blowout), and mount rod bracket on exterior of cabinet with
system screws
• glass frame doors will include aluminum glass frame door trim.
See page B3
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
UTHD19 1/2 465 544425 492UTHD19 1/2
15” DeepWith Glass Frame Upper Doors
21” DeepWidth 84” T 96” T Width 84” T 96” T
UTHDG19 1/2 715 794675 742UTHDG19 1/2
CLOSET UPRIGHTS
U P R I G H T T A L L H A N G E R W / U P P E R D O O R 2 5 1/2”- 3 7 1/2”
25 1/2", 31 1/2", 37 1/2"
Fixed Shelf
Fixed Shelf
16 3/8"27 3/4"
67 1/2"
83 7/8"95 1/4"
16 1/16"27 7/16"
• 84”, 96” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 1 adjustable full depth shelf in top section w/2 doors
• chrome closet rod in bottom section is adjustable
within system holes, and is located 12 1/2” from back
of cabinet
• bottom section 67 1/2” tall
• for rod mounts on exterior of cabinet, slowly drill
holes through existing interior system holes with a
sharp brad point 5 mm bit and scrap block clamped
or held tightly to other side (to prevent blowout), and
mount rod bracket on exterior of cabinet with system
screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
15” Deep 21” DeepWidth 84” T
528 614
96” T
578 674
Width 84” T 96” TUTHD25 1/2 521 608
635 734
476 556
579 672UTHD311/2UTHD37 1/2
UTHD25 1/2UTHD31 1/2UTHD37 1/2
15” DeepWith Glass Frame Upper Doors
21” DeepWidth 84” T
1028 1114
96” T
1078 1174
Width 84” T 96” TUTHDG25 1/2 1021 1108
1135 1234
976 1056
1079 1172UTHDG311/2UTHDG37 1/2
UTHDG25 1/2UTHDG31 1/2UTHDG37 1/2
CLOSET UPRIGHTS
C5
CLOSET UPRIGHTS
• 84”, 96” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• top section 40 5/16” tall
• telescoping pull rod adjustable from 34” to 50”
• chrome closet rod in bottom section is adjustable within
system holes, and is located 12 1/2” from back of cabinet
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp
brad point 5 mm bit and scrap block clamped or held
tightly to other side (to prevent blowout), and mount rod
bracket on exterior of cabinet with system screws
U P R I G H T H A N G E R W / P U L L D O W N C L O T H E S R O D
15” Deep 21” DeepWidth 84” T
802
925
96” T834
962
Width 84” T 96” TUHPDR25 1/2UHPDR31 1/2 896862UHPDR37 1/2
UHPDR25 1/2UHPDR31 1/2UHPDR37 1/2
83 7/8"95 1/4"
43 9/16"54 15/16"
Fixed Shelf
Fixed Shelf
40 5/16"
25 1/2", 31 1/2", 37 1/2"
875
1008
914
1052981940
C6
C7
CLOSET UPRIGHTS
U P R I G H T S H E L V E S
• 84”, 96” tall
• 19 1/2”, 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• chrome closet rod in bottom section is adjustable within sys-
tem holes and is located 12 1/2” from back of cabinet
• top section 40 5/16” tall
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad
point 5 mm bit and scrap block clamped, or held tightly to
other side (to prevent blowout), and mount rod bracket on
exterior of cabinet with system screws
U P R I G H T D O U B L E H A N G E R
83 7/8"95 1/4"
43 9/16"54 15/16"
Fixed Shelf
Fixed Shelf
40 5/16"
19 1/2", 25 1/2", 31 1/2", 37 1/2"
19 1/2", 25 1/2", 31 1/2", 37 1/2"
83 7/8"95 1/4"
43 9/16"54 15/16"
Fixed Shelf
Fixed Shelf
40 5/16"
• 84”, 96” tall
• 19 1/2”, 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top & bottom section
• top section 40 5/16” tall
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad point
5 mm bit and scrap block clamped, or held tightly to other
side (to prevent blowout), and mount rod bracket on exterior
of cabinet with system screws
15” Deep 21” DeepWidth 84” T
481 580
604 725
96” T
513 618
641 769
Width 84” T 96” TUS19 1/2 449 543
577 694
420 507
542 652US25 1/2US31 1/2US37 1/2
US19 1/2US25 1/2US31 1/2US37 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
UDH19 1/2 433
522
404
488UDH25 1/2 446
529
478
566UDH31 1/2UDH37 1/2
UDH19 1/2 508
607
472
565UDH25 1/2 557
656612
519UDH31 1/2UDH37 1/2
CLOSET UPRIGHTS
• 84”, 96” tall
• 19 1/2”, 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• fi nished exterior & interior
• adjustable shoe shelves are chrome rails attached to adjustable
shelves on 15° angle. For 15” deep shoe shelf, raise rear shelf
clips three holes, and for 21” deep shoe shelf, raise rear shelf
clips 5 holes for shelf installation
• bottom section 54 15/16” tall
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad point
5 mm bit and scrap block clamped, or held tightly to other
side (to prevent blowout), and mount rod bracket on exterior
of cabinet with system screws.
U P R I G H T S H O E S H E L F
• 84”, 96” tall
• 19 1/2”, 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section
• adjustable shoe shelves are chrome rails attached to adjustable
shelves on 15° angle. For 15” deep shoe shelf, raise rear shelf
clips three holes, and for 21” deep shoe shelf, raise rear shelf
clips 5 holes for shelf installation
• bottom section 54 15/16” tall
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad point
5 mm bit and scrap block clamped, or held tightly to other
side (to prevent blowout), and mount rod bracket on exterior
of cabinet with system screws
U P R I G H T S H E L F & S H O E S H E L F
83 7/8"95 1/4"
54 15/16"
19 1/2", 25 1/2", 31 1/2", 37 1/2"
Fixed Shelf
28 15/16"40 5/16"
15” Deep 21” DeepWidth 84” T
636
805
96” T
668
842
Width 84” T
946
747
96” T
990
786USSS19 1/2 530
706
559
740USSS25 1/2USSS31 1/2USSS37 1/2
USSS19 1/2 663
873
627
832USSS25 1/2USSS31 1/2USSS37 1/2
15” Deep 21” DeepWidth 84” T
789
1005
96” T
821
1043
Width 84” T
913
1165
96” T
952
1209
USS19 1/2 668
902
639
868USS25 1/2USS31 1/2USS37 1/2
USS19 1/2 781
1051
745
1009USS25 1/2USS31 1/2USS37 1/2
Fixed Shelf83 7/8"95 1/4"
19 1/2", 25 1/2", 31 1/2", 37 1/2"
54 15/16"
28 15/16"40 5/16"
C8
CLOSET UPRIGHTS
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/1 door
• adjustable shoe shelves are chrome rails attached to adjustable
shelves on 15° angle. For 15” deep shoe shelf, raise rear shelf
clips three holes, and for 21” deep shoe shelf, raise rear shelf
clips 5 holes for shelf installation
• bottom section 54 15/16” tall
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad point 5 mm bit
and scrap block clamped or held tightly to other side (to prevent
blowout), and mount rod bracket on exterior of cabinet with
system screws
• glass frame doors will include aluminum glass frame door trim.
See page B3
U P R I G H T S H E L F & S H O E S H E L F W / U P P E R D O O R 1 9 1/2”
83 7/8"95 1/4"
54 15/16"
19 1/2"
Fixed Shelf
28 15/16"40 5/16"
28 11/16"40 1/16"
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
USSSD19 1/2 622
872
575
825USSSDG19 1/2
USSS19 1/2 726
976
672
922USSSDG19 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
C9
C10
CLOSET UPRIGHTS
• 84”, 96” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/2
doors
• adjustable shoe shelves are chrome rails attached to
adjustable shelves on 15° angle. For 15” deep shoe
shelf, raise rear shelf clips three holes, and for 21”
deep shoe shelf, raise rear shelf clips 5 holes for shelf
installation
• bottom section 54 15/16” tall
• for rod mounts on exterior of cabinet, slowly drill
holes through existing interior system holes with a
sharp brad point 5 mm bit and scrap block clamped
or held tightly to other side (to prevent blowout),
and mount rod bracket on exterior of cabinet with
system screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
U P R I G H T S H E L F & S H O E S H E L F W / U P P E R D O O R 2 5 1/2 -3 7 1/2
83 7/8"95 1/4"
54 15/16"
25 1/2", 31 1/2", 37 1/2"
Fixed Shelf
28 15/16"40 5/16"
28 11/16"40 1/16"
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
USSSD25 1/2 741
1241
689
1189USSSDG25 1/2
USSSD25 1/2 859
1359
801
1301USSSDG25 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
USSSD31 1/2 767 824 USSSD31 1/2 893 957USSSD37 1/2 936874 USSSD37 1/2 10841015
USSSDG31 1/2 1267 1324 USSSDG31 1/2 1393 1457USSSDG37 1/2 14361374 USSSDG37 1/2 15841515
CLOSET UPRIGHTS
U P R I G H T 5 D R A W E R
• 84”, 96” tall
• 19 1/2”, 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section
• bottom section 44 7/8” tall
• 1/2”white vinyl wrapped particle board drawer boxes mounted
with precision steel ball bearing side mount full extension
guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad point
5 mm bit and scrap block clamped, or held tightly to other
side (to prevent blowout), and mount rod bracket on exterior
of cabinet with system screws
U P R I G H T 4 D R A W E R
Fixed Shelf83 7/8"95 1/4"
39"50 3/8"
44 7/8"
6 1/16"
11 1/8"
11 1/8"
11 1/8"
19 1/2", 25 1/2", 31 1/2", 37 1/2"
Fixed Shelf83 7/8"95 1/4"
39"50 3/8"
44 7/8"
6 1/16"
7 5/16"
7 5/16"
7 5/16"
11 1/8"
19 1/2", 25 1/2", 31 1/2", 37 1/2"
15” Deep 21” DeepWidth 84” T
776 934
964 1148
96” T
808 973
1001 1192
Width 84” T 96” TU4DR19 1/2 711 863
904 1082
682 827
870 1041U4DR25 1/2U4DR31 1/2U4DR37 1/2
U4DR19 1/2U4DR25 1/2U4DR31 1/2U4DR37 1/2
• 84”, 96” tall
• 19 1/2”, 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section
• bottom section 44 7/8” tall
• 1/2” white vinyl wrapped particle board drawer boxes mount-
ed with precision steel ball bearing side mount full extension
guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad point
5 mm bit and scrap block clamped, or held tightly to other
side (to prevent blowout), and mount rod bracket on exterior
of cabinet with system screws
15” Deep 21” DeepWidth 84” T
823
1021
96” T
855
1058
Width 84” T
994
1220
96” T
1033
1264
U5DR19 1/2 754725
922 956U5DR25 1/2U5DR31 1/2U5DR37 1/2
U5DR19 1/2 917
1148
881
1107U5DR25 1/2U5DR31 1/2U5DR37 1/2
C11
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/1 door
• bottom section 44 7/8” tall
• 1/2” white vinyl wrapped particle board drawer boxes
• mounted with precision steel ball bearing side mount full
extension guides
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad point 5 mm bit
and scrap block clamped or held tightly to other side (to prevent
blowout), and mount rod bracket on exterior of cabinet with
system screws
• glass frame doors will include aluminum glass frame door trim.
See page B3
U P R I G H T 4 D R A W E R W / U P P E R D O O R 1 9 1/2”
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
6 1/16"
11 1/8"
11 1/8"
11 1/8"
38 3/4"50 1/8"
Fixed Shelf
19 1/2"
C12
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
U4DRD19 1/2 783
1033
737
987U4DRDG19 1/2
U4DRD19 1/2 936
1186
882
1132U4DRDG19 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
CLOSET UPRIGHTS
C13
• 84”, 96” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/2 doors
• bottom section 44 7/8” tall
• 1/2” white vinyl wrapped particle board drawer boxes
• mounted with precision steel ball bearing side mount full
extension guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad
point 5 mm bit and scrap block clamped or held tightly to
other side (to prevent blowout), and mount rod bracket
on exterior of cabinet with system screws
• glass frame doors will include aluminum glass frame door
trim. See page B3
U P R I G H T 4 D R A W E R W / U P P E R D O O R 2 5 1/2” -3 7 1/2”
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
6 1/16"
11 1/8"
11 1/8"
11 1/8"
38 3/4"50 1/8"
Fixed Shelf
25 1/2", 31 1/2", 37 1/2"
CLOSET UPRIGHTS
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
U4DRD25 1/2 893
1393
841
1341U4DRDG25 1/2
U4DRD25 1/2 1058
1558
999
1499U4DRDG25 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
U4DRD31 1/2 945 1002 U4DRD31 1/2 1116 1180U4DRD37 1/2 11111049 U4DRD37 1/2 13031234
U4DRDG31 1/2 1445 1502 U4DRDG31 1/2 1616 1680U4DRDG37 1/2 16111549 U4DRDG37 1/2 18031734
C14
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/1 door
• bottom section 44 7/8” tall
• 1/2” white vinyl wrapped particle board drawer boxes
• mounted with precision steel ball bearing side mount full
extension guides
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad point 5 mm
bit and scrap block clamped or held tightly to other side (to
prevent blowout), and mount rod bracket on exterior of cabinet
with system screws
• glass frame doors will include aluminum glass frame door trim.
See page B3
U P R I G H T 5 D R A W E R W / U P P E R D O O R 1 9 1/2”
Fixed Shelf
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
6 1/16"
7 5/16"
7 5/16"
7 5/16"
11 1/8"
19 1/2"
38 3/4"50 1/8"
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
U5DRD19 1/2 826
1076
780
1030U5DRDG19 1/2
U5DRD19 1/2 989
1239
936
1186U5DRDG19 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
CLOSET UPRIGHTS
C15
• 84”, 96” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/2 doors
• bottom section 44 7/8” tall
• 1/2” white vinyl wrapped particle board drawer boxes
• mounted with precision steel ball bearing side mount full
extension guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad
point 5 mm bit and scrap block clamped or held tightly to
other side (to prevent blowout), and mount rod bracket on
exterior of cabinet with system screws
• glass frame doors will include aluminum glass frame door
trim. See page B3
U P R I G H T 5 D R A W E R W / U P P E R D O O R 2 5 1/2” -3 7 1/2”
Fixed Shelf
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
6 1/16"
7 5/16"
7 5/16"
7 5/16"
11 1/8"
25 1/2", 31 1/2", 37 1/2"
38 3/4"50 1/8"
CLOSET UPRIGHTS
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
U5DRD25 1/2 940
1440
889
1389U5DRDG25 1/2
U5DRD25 1/2 1118
1618
1059
1559U5DRDG25 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
U5DRD31 1/2 997 1054 U5DRD31 1/2 1182 1246U5DRD37 1/2 11681106 U5DRD37 1/2 13751306
U5DRDG31 1/2 1497 1554 U5DRDG31 1/2 1682 1746U5DRDG37 1/2 16681606 U5DRDG37 1/2 18751806
C16
CLOSET UPRIGHTS
• 84”, 96” tall
• 19 1/2”, 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section
• bottom section 44 7/8” tall
• 1/2”white vinyl wrapped particle board drawer boxes
mounted with precision steel ball bearing side mount full
extension guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad
point 5 mm bit and scrap block clamped, or held tightly to
other side (to prevent blowout), and mount rod bracket on
exterior of cabinet with system screws
U P R I G H T 6 D R A W E R
15” Deep 21” DeepWidth 84” T
880
1090
96” T
912
1127
Width 84” T 96” TU6DR19 1/2 805776U6DR25 1/2U6DR31 1/2 1019985U6DR37 1/2
U6DR19 1/2U6DR25 1/2U6DR31 1/2U6DR37 1/2
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
6 1/16"
6 1/16"
6 1/16"
6 1/16"
7 5/16"
7 5/16"
Fixed Shelf
19 1/2", 25 1/2", 31 1/2", 37 1/2"
1065
1306
1104
1350
981945
12271185
C17
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/1 door
• bottom section 44 7/8” tall
• 1/2” white vinyl wrapped particle board drawer boxes
• mounted with precision steel ball bearing side mount
full extension guides
• for rod mounts on exterior of cabinet, slowly drill
holes through existing interior system holes with a
sharp brad point 5 mm bit and scrap block clamped
or held tightly to other side (to prevent blowout), and
mount rod bracket on exterior of cabinet with system
screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
U P R I G H T 6 D R A W E R W / U P P E R D O O R 1 9 1/2”
38 3/4"50 1/8"
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
6 1/16"
6 1/16"
6 1/16"
6 1/16"
7 5/16"
7 5/16"
Fixed Shelf
19 1/2"
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
U6DRD19 1/2 877
1127
831
1081U6DRDG19 1/2
U6DRD19 1/2 1053
1303
1000
1250U6DRDG19 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
CLOSET UPRIGHTS
C18
CLOSET UPRIGHTS
• 84”, 96” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/2
doors
• bottom section 44 7/8” tall
• 1/2” white vinyl wrapped particle board drawer boxes
• mounted with precision steel ball bearing side mount
full extension guides
• for rod mounts on exterior of cabinet, slowly drill
holes through existing interior system holes with a
sharp brad point 5 mm bit and scrap block clamped
or held tightly to other side (to prevent blowout),
and mount rod bracket on exterior of cabinet with
system screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
U P R I G H T 6 D R A W E R W / U P P E R D O O R 2 5 1/2” -3 7 1/2”
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
6 1/16"
6 1/16"
6 1/16"
6 1/16"
7 5/16"
7 5/16"
38 3/4"50 1/8"
Fixed Shelf
25 1/2", 31 1/2", 37 1/2"
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
U6DRD25 1/2 997
1497
945
1445U6DRDG25 1/2
U6DRD25 1/2 1189
1689
1130
1630U6DRDG25 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
U6DRD31 1/2 1060 1117 U6DRD31 1/2 1261 1324U6DRD37 1/2 12371175 U6DRD37 1/2 14601391
U6DRDG31 1/2 1560 1617 U6DRDG31 1/2 1761 1824U6DRDG37 1/2 17371675 U6DRDG37 1/2 19601891
C19
• 84”, 96” tall
• 19 1/2”, 25 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section
• bottom section 44 7/8” tall
• chrome wire baskets mounted with precision steel ball bearing
side mount full extension guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad point
5 mm bit and scrap block clamped, or held tightly to other
side (to prevent blowout), and mount rod bracket on exterior
of cabinet with system screws
U P R I G H T 4 B A S K E T
15” Deep 21” DeepWidth 84” T
9081148
96” T937
1179
Width 84” T12301420
96” T12661459
U4B19 1/2U4B25 1/2
U4B19 1/2U4B25 1/2
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
Fixed Shelf
19 1/2", 25 1/2"
7"
7"
11"
11"
U P R I G H T 3 B A S K E T
• 84”, 96” tall
• 19 1/2”, 25 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section
• bottom section 44 7/8” tall
• chrome wire baskets mounted with precision steel ball bearing
side mount full extension guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad point
5 mm bit and scrap block clamped, or held tightly to other
side (to prevent blowout), and mount rod bracket on exterior
of cabinet with system screws
15” Deep 21” DeepWidth 84” T
1007 1228
96” T
1039 1266
Width 84” T 96” TU3B19 1/2 859 1123830 1087U3B25 1/2
U3B19 1/2U3B25 1/2
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
Fixed Shelf
19 1/2", 25 1/2"
7"
11"
18"
CLOSET UPRIGHTS
C20
CLOSET UPRIGHTS
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/1 door
• bottom section 44 7/8” tall
• chrome wire basket mounted with precision steel ball
bearing side mount full extension guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp
brad point 5 mm bit and scrap block clamped or held
tightly to other side (to prevent blowout), and mount
rod bracket on exterior of cabinet with system screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
U P R I G H T 3 B A S K E T W / U P P E R D O O R 1 9 1/2”
38 3/4"50 1/8"
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
19 1/2"
7"
11"
18"
Fixed Shelf
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
U3BD19 1/2 931
1181
885
1135U3BDG19 1/2
U3BD19 1/2 1195
1445
1142
1392U3BDG19 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
C21
CLOSET UPRIGHTS
• 84”, 96” tall
• 25 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/2 doors
• bottom section 44 7/8” tall
• chrome wire basket mounted with precision steel ball
bearing side mount full extension guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad
point 5 mm bit and scrap block clamped or held tightly to
other side (to prevent blowout), and mount rod bracket
on exterior of cabinet with system screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
U P R I G H T 3 B A S K E T W / U P P E R D O O R 2 5 1/2”
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
25 1/2"
7"
11"
18"
38 3/4"50 1/8"
Fixed Shelf
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
U3BD25 1/2 1124
1624
1072
1572U3BDG25 1/2
U3BD25 1/2 1352
1852
1293
1793U3BDG25 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
C22
CLOSET UPRIGHTS
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/1 door
• bottom section 44 7/8” tall
• chrome wire basket mounted with precision steel ball
bearing side mount full extension guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad
point 5 mm bit and scrap block clamped or held tightly to
other side (to prevent blowout), and mount rod bracket
on exterior of cabinet with system screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
U P R I G H T 4 B A S K E T W / U P P E R D O O R 1 9 1/2”
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
19 1/2"
7"
7"
11"
11"
38 3/4"50 1/8"
Fixed Shelf
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
U4BD19 1/2 1009
1259
963
1213U4BDG19 1/2
U4BD19 1/2 1339
1589
1285
1535U4BDG19 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
C23
CLOSET UPRIGHTS
• 84”, 96” tall
• 25 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/2 doors
• bottom section 44 7/8” tall
• chrome wire basket mounted with precision steel ball
bearing side mount full extension guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad
point 5 mm bit and scrap block clamped or held tightly to
other side (to prevent blowout), and mount rod bracket
on exterior of cabinet with system screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
U P R I G H T 4 B A S K E T W / U P P E R D O O R 2 5 1/2”
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
25 1/2"
7"
7"
11"
11"
38 3/4"50 1/8"
Fixed Shelf
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
U4BD25 1/2 1264
1764
1213
1713U4BDG25 1/2
U4BD25 1/2 1544
2044
1485
1985U4BDG25 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
C24
CLOSET UPRIGHTS
U P R I G H T 5 B A S K E T
• 84”, 96” tall
• 19 1/2”, 25 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section
• bottom section 44 7/8” tall
• chrome wire baskets mounted with precision steel ball bearing side
mount full extension guides
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad point 5 mm bit
and scrap block clamped, or held tightly to other side (to prevent
blowout), and mount rod bracket on exterior of cabinet with
system screws
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
Fixed Shelf
19 1/2", 25 1/2"
7"
7"
7"
7"
7"
15” Deep 21” DeepWidth 84” T
10251307
96” T10541338
Width 84” T13551611
96” T
16501391U5B19 1/2
U5B25 1/2U5B19 1/2U5B25 1/2
C25
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/1 door
• bottom section 44 7/8” tall
• chrome wire basket mounted with precision steel ball
bearing side mount full extension guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad
point 5 mm bit and scrap block clamped or held tightly to
other side (to prevent blowout), and mount rod bracket
on exterior of cabinet with system screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
U P R I G H T 5 B A S K E T W / U P P E R D O O R 1 9 1/2”
38 3/4"50 1/8"
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
19 1/2"
7"
7"
7"
7"
7"
Fixed Shelf
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
U5BD19 1/2 1126
1376
1080
1330U5BDG19 1/2
U5BD19 1/2 1464
1714
1410
1660U5BDG19 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
CLOSET UPRIGHTS
C26
CLOSET UPRIGHTS
• 84”, 96” tall
• 25 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/2 doors
• bottom section 44 7/8” tall
• chrome wire basket mounted with precision steel ball
bearing side mount full extension guides
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad
point 5 mm bit and scrap block clamped or held tightly to
other side (to prevent blowout), and mount rod bracket
on exterior of cabinet with system screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
U P R I G H T 5 B A S K E T W / U P P E R D O O R 2 5 1/2”
38 3/4"50 1/8"
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
25 1/2"
7"
7"
7"
7"
7"
Fixed Shelf
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
U5BD25 1/2 1423
1923
1372
1872U5BDG25 1/2
U5BD25 1/2 1735
2235
1676
2176U5BDG25 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
CLOSET UPRIGHTS
U P R I G H T L O W E R D O O R 19 1/2”
• 84”, 96” tall
• 19 1/2”, 25 1/2”, 31 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section
• bottom section 44 7/8” tall
• chrome pant rack mounted with precision steel ball bearing side
mount full extension guides
• individual pant racks not mountable in standard system holes
• UPR19 1/2 holds 9 pair of pants
• UPR25 1/2 holds 13 pair of pants
• UPR31 1/2 holds 16 pair of pants
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad point 5 mm bit
and scrap block clamped, or held tightly to other side (to prevent
blowout), and mount rod bracket on exterior of cabinet with
system screws
U P R I G H T P A N T R A C K
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section
• bottom section 44 7/8” tall w/ 1 door & 2 adjustable full depth
shelves
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad point 5 mm bit
and scrap block clamped, or held tightly to other side (to prevent
blowout), and mount rod bracket on exterior of cabinet with
system screws
Fixed Shelf83 7/8"95 1/4"
39"50 3/8"
44 7/8"
19 1/2", 25 1/2", 31 1/2"
15” Deep 21” DeepWidth 84” T
831
96” T
863
Width 84” T 96” TUPR19 1/2 766737UPR25 1/2
UPR19 1/2UPR25 1/2
UPR31 1/2 912881 UPR31 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
ULD19 1/2 526499 ULD19 1/2
19 1/2"
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
Fixed Shelf
40 1/16"
917 956851815
1007970
614581
C27
C28
CLOSET UPRIGHTS
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/1 door
• bottom section 44 7/8” tall
• chrome pant rack mounted with precision steel ball bearing
side mount full extension guides
• individual pant racks not mountable in standard system holes
• UPR19 1/2 holds 9 pair of pants
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad point
5 mm bit and scrap block clamped, or held tightly to other side
(to prevent blowout), and mount rod bracket on exterior of
cabinet with system screws
• glass frame doors will include aluminum glass frame door
trim. See page B3
U P R I G H T P A N T R A C K W / U P P E R D O O R 1 9 1/2”
38 3/4"50 1/8"
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
19 1/2"
Fixed Shelf
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
UPRD19 1/2 839
1089
792
1042UPRDG19 1/2
UPRD19 1/2 923
1173
870
1120UPRDG19 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
C29
CLOSET UPRIGHTS
• 84”, 96” tall
• 25 1/2”, 31 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves in top section w/2doors
• bottom section 44 7/8” tall
• chrome pant rack mounted with precision steel ball bearing
side mount full extension guides
• individual pant racks not mountable in standard system holes
• UPR25 1/2 holds 13 pair of pants
• UPR31 1/2 holds 16 pair of pants
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad
point 5 mm bit and scrap block clamped, or held tightly to
other side (to prevent blowout), and mount rod bracket on
exterior of cabinet with system screws
• glass frame doors will include aluminum glass frame door
trim. See page B3
U P R I G H T P A N T R A C K W / U P P E R D O O R 2 5 1/2”- 31 1/2”
38 3/4"50 1/8"
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
25 1/2", 31 1/2"
Fixed Shelf
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
UPRD25 1/2 948
1448
896
1396UPRDG25 1/2
UPRD25 1/2 1041
1541
982
1482UPRDG25 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
UPRD31 1/2 957 1010 UPRD31 1/2 1045 1105
UPRDG31 1/2 1457 1510 UPRDG31 1/2 1545 1605
C30
U P R I G H T L O W E R D O O R W / U P P E R D O O R 19 1/2”
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• bottom section 44 7/8” tall w/ 1 door & 2 adjustable full
• depth shelves
• 2 adjustable full depth shelves in top section w/1 door
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad point 5 mm bit
and scrap block clamped or held tightly to other side (to prevent
blowout), and mount rod bracket on exterior of cabinet with
system screws
• glass frame doors will include aluminum glass frame door trim.
See page B3
38 3/4"50 1/8"
19 1/2"
83 7/8"95 1/4"
39"50 3/8"
44 7/8"40 1/16"
Fixed Shelf
CLOSET UPRIGHTS
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
ULDD19 1/2 598
848
554
804ULDDG19 1/2
ULDD19 1/2 686
936
636
886ULDDG19 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
C31
• 84”, 96” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• bottom section 44 7/8” tall w/ 2 doors & 2 adjustable
full depth shelves
• 2 adjustable full depth shelves in top section w/2
doors
• for rod mounts on exterior of cabinet, slowly drill
holes through existing interior system holes with a
sharp brad point 5 mm bit and scrap block clamped
or held tightly to other side (to prevent blowout),
and mount rod bracket on exterior of cabinet with
system screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
U P R I G H T L O W E R D O O R W / U P P E R D O O R 2 5 1/2” -3 7 1/2”
25 1/2", 31 1/2", 37 1/2"
83 7/8"95 1/4"
39"50 3/8"
44 7/8"40 1/16"
38 3/4"50 1/8"
Fixed Shelf
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
ULDD25 1/2 714
1214
662
1162ULDDG25 1/2
ULDD25 1/2 819
1319
761
1261ULDDG25 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
ULDD31 1/2 746 803 ULDD31 1/2 856 920ULDD37 1/2 892830 ULDD37 1/2 1020951
ULDDG31 1/2 1246 1303 ULDDG31 1/2 1356 1420ULDDG37 1/2 13921330 ULDDG37 1/2 15201451
CLOSET UPRIGHTS
U P R I G H T H A M P E R
• 84”, 96” tall
• 19 1/2”, 25 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 3 adjustable full depth shelves in top section
• bottom section 33 1/2” tall w/ chrome wire tilt out hamper
• UH19 1/2 has 1.7 bushel (55 Qt.) capacity
• UH25 1/2 has 2.3 bushel (75 Qt.) capacity
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad point
5 mm bit and scrap block clamped, or held tightly to other side
(to prevent blowout), and mount rod bracket on exterior of
cabinet with system screws
19 1/2", 25 1/2"
83 7/8"95 1/4"
50 3/8"61 3/4"
33 1/2"
Fixed Shelf
28 3/4"15” Deep 21” Deep
Width 84” T 96” T Width 84” T 96” TUH19 1/2 UH19 1/2UH25 1/2 UH25 1/21042 1074
9839541128 1166
10681032
C32
CLOSET UPRIGHTS
C33
U P R I G H T H A M P E R W / U P P E R D O O R 19 1/2”
• 84”, 96” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• bottom section 33 1/2” w/ chrome wire tilt out hamper
• 3 adjustable full depth shelves in top section w/1 door
• UH19 1/2 has 1.7 bushel (55 Qt.) capacity
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad point 5 mm bit
and scrap block clamped or held tightly to other side (to prevent
blowout), and mount rod bracket on exterior of cabinet with
system screws
• glass frame doors will include aluminum glass frame door trim.
See page B3
19 1/2"
83 7/8"95 1/4"
50 3/8"61 3/4"
33 1/2"
Fixed Shelf
28 3/4"
50 1/8"61 1/2"
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
UHD19 1/2 1067
1317
1027
1277UHDG19 1/2
UHD19 1/2 1151
1401
1104
1354UHDG19 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
CLOSET UPRIGHTS
CLOSET UPRIGHTS
• 84”, 96” tall
• 25 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• bottom section 33 1/2” w/ chrome wire tilt out hamper
• 3 adjustable full depth shelves in top section w/2 doors
• UH25 1/2 has 2.3 bushel (74 Qt.) capacity
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp brad
point 5 mm bit and scrap block clamped or held tightly to
other side (to prevent blowout), and mount rod bracket
on exterior of cabinet with system screws
• glass frame doors will include aluminum glass frame
door trim. See page B3
U P R I G H T H A M P E R W / U P P E R D O O R 2 5 1/2”
25 1/2"
83 7/8"95 1/4"
50 3/8"61 3/4"
33 1/2"
Fixed Shelf
28 3/4"
50 1/8"61 1/2"
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
UHD25 1/2 1172
1672
1127
1627UHDG25 1/2
UHD25 1/2 1265
1765
1213
1713UHDG25 1/2
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
With Glass Frame Upper Doors
C34
• 84”, 96” tall
• 15” deep
• finished exterior & interior
• matching finish back brace
• bottom section 44 7/8” tall w/2 adjustable full depth shelves
• 2 adjustable full depth shelves in top section
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad point 5 mm bit
and scrap block clamped, or held tightly to other side (to prevent
blowout), and mount rod bracket on exterior of cabinet with
system screws
U P R I G H T A N G L E S H E L F
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
Fixed Shelf
20 1/8"
15” DeepWidth 84” T 96” T
UAS30
30"
30"
15"
15"
20 1/8"
823775
CLOSET UPRIGHTS
• 84”, 96” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• bottom section 44 7/8” tall w/2 doors & 2 adjustable full depth
shelves
• 2 adjustable full depth shelves in top section
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad point 5 mm bit
and scrap block clamped, or held tightly to other side (to prevent
blowout), and mount rod bracket on exterior of cabinet with system
screws
U P R I G H T L O W E R D O O R 25 1/2”-37 1/2”
25 1/2", 31 1/2", 37 1/2"
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
Fixed Shelf
40 1/16"
15” Deep 21” DeepWidth 84” T 96” T Width 84” T 96” T
ULD25 1/2ULD31 1/2
ULD25 1/2ULD31 1/2
ULD37 1/2 ULD37 1/2671 705
629597
781744781 822
734695
910866
C35
• 84”, 96” tall
• 15” deep
• finished exterior & interior
• matching finish back brace
• bottom section 44 7/8” tall & 2 adjustable full depth
shelves
• 2 adjustable full depth shelves in top section
• for rod mounts on exterior of cabinet, slowly drill
holes through existing interior system holes with a
sharp brad point 5 mm bit and scrap block clamped,
or held tightly to other side (to prevent blowout), and
mount rod bracket on exterior of cabinet with system
screws
U P R I G H T A N G L E R A D I U S S H E L F
30"
30"
15"
15"
20 1/8"
R6"
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
Fixed Shelf
20 1/8"
15” DeepWidth 84” T 96” T
UAR30 826778
CLOSET UPRIGHTS
C36
CLOSET UPRIGHTS
• 84”, 96” tall
• 19 1/2” wide
• 21” deep
• finished exterior & interior
• chrome closet rod in top section is adjustable within system holes
and is located 12 1/2” from back of cabinet
• for rod mounts on exterior of cabinet, slowly drill holes through
existing interior system holes with a sharp brad point 5 mm bit
and scrap block clamped or held tightly to other side (to prevent
blowout), and mount rod bracket on exterior of cabinet with
system screws
U P R I G H T I R O N I N G B O A R D
83 7/8"95 1/4"
33 1/2"
50 3/8"61 3/4"
19 1/2"
6 1/16"
22 7/16"
21” DeepWidth 84” T 96” T
UIB19 1/2 11721133
C37
U P R I G H T A N G L E S H E L F L O W E R D O O R
• 84”, 96” tall
• 15” deep
• finished exterior & interior
• matching finish back brace
• 2 adjustable full depth shelves in top section
• bottom section 44 7/8” tall w/1 door & 2adjustable full
depth shelves
• for rod mounts on exterior of cabinet, slowly drill holes
through existing interior system holes with a sharp
brad point 5 mm bit and scrap block clamped, or held
tightly to other side (to prevent blowout), and mount
rod bracket on exterior of cabinet with system screwsFixed Shelf
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
20 1/8"
40 1/16"
15” DeepWidth 84” T 96” T
UASD30
30"
30"
15"
15"
20 1/8"
897849
CLOSET UPRIGHTS
C38
C39
U P R I G H T A N G L E S H E L F L O W E R D O O R W / U P P E R D O O R
• 84”, 96” tall
• 15” deep
• finished exterior & interior » matching finish
back brace
• bottom section 44 7/8” tall w/ 2 adjustable full
depth shelves & 1 door
• 2 adjustable full depth shelves w/1 door in top
section
• for rod mounts on exterior of cabinet, slowly
drill holes through existing interior system
holes with a sharp brad point 5 mm bit and
scrap block clamped or held tightly to other
side (to prevent blowout), and mount rod
bracket on exterior of cabinet with system
screws
• glass frame doors will include aluminum glass
frame door trim. See page B3
38 3/4"50 1/8"
83 7/8"95 1/4"
39"50 3/8"
44 7/8"
20 1/8"
40 1/16"
Fixed Shelf
15” DeepWidth 84” T 96” T
UASDD30 971
1221
905
1155UASDDG30
15” DeepWidth 84” T 96” T
With Glass Frame Upper Doors
CLOSET UPRIGHTS
30"
30"
15"
15"
20 1/8"
CLOSET WALLS
W A L L 1 9 1/2”
• 24”, 27”, 30”, 33”, 36”, 39” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves
• glass frame doors will include
aluminum glass frame door
trim. See page B3
15” Deep
15” Deep
Width
Width
27” T
27” T
36” T
36” T
30” T
30” T
39” T
39” T
CW19 1/2
CWG19 1/2
21” Deep
21” Deep
Width
Width
27” T
27” T
36” T
36” T
30” T
30” T
39” T
39” T
CW19 1/2
CWG19 1/2
24” T
24” T
33” T
33” T
24” T
24” T
33” T
33” T
24 11/16"27 1/4"29 3/4"33 5/8"36 1/8"
38 11/16"
19 1/2"
23 11/16"26 1/4"28 3/4"32 5/8"35 1/8"
37 11/16"
W A L L 2 5 1/2” - 37 1/2”
• 24”, 27”, 30”, 33”, 36”, 39” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves
• glass frame doors will include
aluminum glass frame door
trim. See page B3
15” Deep
15” Deep
Width
Width
27” T
27” T
36” T
36” T
30” T
30” T
39” T
39” T
CW25 1/2
CWG25 1/2
21” Deep
21” Deep
Width
Width
27” T
27” T
36” T
36” T
30” T
30” T
39” T
39” T
24” T
24” T
33” T
33” T
24” T
24” T
33” T
33” T
CW31 1/2
CWG31 1/2
CW37 1/2
CWG37 1/2
CW25 1/2
CWG25 1/2
CW31 1/2
CWG31 1/2
CW37 1/2
CWG37 1/2
25 1/2", 31 1/2", 37 1/2"
23 11/16"26 1/4"28 3/4"32 5/8"35 1/8"
37 11/16"
24 11/16"27 1/4"29 3/4"33 5/8"36 1/8"
38 11/16"
D1
229
479
263
513
218
468
251
501
240
490
274
524
269
519
308
558
282
532
320
570
256
506
295
545
335
835
382
882
350
850
397
897
320
820
367
867
374
874
424
924
284
784
341
841
391
891
441
941
309
809
354
854
357
857
407
907
282
782
327
827
388
888
440
940
404
904
457
957
371
871
423
923
433
933
488
988
342
842
392
892
451
951
507
1007
357
857
407
907
415
915
470
970
327
827
377
877
With Glass Frame Doors
With Glass Frame Doors
25 1/2", 31 1/2", 37 1/2"
38 11/16"
W A L L N O D O O R W / P U L L D O W N C L O T H E S R O D
• 39” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• telescoping pull rod adjustable from
34” to 50”
15” DeepWidth
CWPDR25 1/2
21” DeepWidth
CWPDR25 1/2CWPDR31 1/2 CWPDR31 1/2
CWPDR19 1/2 CWPDR19 1/2680733
631739799
684
CLOSET WALLS
W A L L N O D O O R
• 24”, 27”, 30”, 33”, 36”, 39” tall
• 19 1/2”, 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• 2 adjustable full depth shelves
19 1/2", 25 1/2", 31 1/2", 37 1/2"
24 11/16"27 1/4"29 3/4"33 5/8"36 1/8"
38 11/16"
15” DeepWidth 27” T 36” T30” T 39” T
CWND19 1/2
21” DeepWidth 27” T 36” T30” T 39” T24” T 33” T 24” T 33” T
CWND25 1/2CWND31 1/2
CWND19 1/2CWND25 1/2CWND31 1/2
203 233211 241195 222233 263
173 196
242 272
180 204
226 254
165 188249 284259 294239 274286 321
213 241
297 331
222 250
277 310
203 231
CWND37 1/2 CWND37 1/2263 293273 303254 283 322 357334 369311 346
D2
D3
CLOSET WALLS
A N G L E W A L L
A N G L E W A L L N O D O O R
• 24”, 27”, 30”, 33”, 36”, 39” tall
• 15” deep
• finished exterior & interior
• 2 adjustable full depth shelves
• matching finish back brace
• glass frame doors will include
aluminum glass frame door trim.
See page B3
• 24”, 27”, 30”, 33”, 36”, 39” tall
• 15” deep
• finished exterior & interior
• 2 adjustable full depth shelves
• matching finish back brace
15” Deep
15” Deep
15” Deep
Width
Width
Width
27” T
27” T
27” T
36” T
36” T
36” T
30” T
30” T
30” T
39” T
39” T
39” T
CAW30
CAWND30
CAWG30
24” T
24” T
24” T
33” T
33” T
33” T
20 1/8"
24 11/16"27 1/4"29 3/4"33 5/8"36 1/8"
38 11/16"
23 11/16"26 1/4"28 3/4"32 5/8"35 1/8"
37 11/16"
20 1/8"
24 11/16"27 1/4"29 3/4"33 5/8"36 1/8"
38 11/16"
369
311
619
407
339
657
356
302
606
394
329
644
382
320
632
420
348
670
30"
30"
15"
15"
20 1/8"
30"
30"
15"
15"
20 1/8"
With Glass Frame Doors
CLOSET BASES
B A S E 1 9 1/2”
• 33 1/2” tall
• 19 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• bottom section has 1 door & 1 adjustable full
depth shelf
• 1/2” white vinyl wrapped particle board drawer
box mounted with precision steel ball bearing side
mount full extension guides
33 1/2"
19 1/2"
6 1/16"
22 7/16"
33 1/2"
6 1/16"
22 7/16"
25 1/2", 31 1/2", 37 1/2"
B A S E 2 5 1/2” - 3 7 1/2”
• 33 1/2” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• bottom section has 2 doors & 1 adjustable full depth
shelf
• 1/2” white vinyl wrapped particle board drawer
box mounted with precision steel ball bearing side
mount full extension guides
15” DeepWidth
CB19 1/2
21” DeepWidth
CB19 1/2
15” DeepWidth
CB25 1/2
21” DeepWidth
CB25 1/2CB31 1/2 CB31 1/2CB37 1/2 CB37 1/2
280
331
348389431
403449496
E1
CLOSET BASES
B A S E 2 5 1/2”- 3 7 1/2” F U L L H E I G H T D O O R
• 33 1/2” tall
• 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• bottom section has 2 doors & 2 adjustable full depth shelves
33 1/2"
25 1/2", 31 1/2", 37 1/2"
28 3/4"
15” DeepWidth
CB25 1/2-FHD
21” DeepWidth
CB25 1/2-FHDCB31 1/2-FHD CB31 1/2-FHDCB37 1/2-FHD CB37 1/2-FHD
33 1/2"
19 1/2"
28 3/4"
B A S E 1 9 1/2” F U L L H E I G H T D O O R
• 33 1/2” tall
• 19 1/2” wide
• 15”, 21” deep
• bottom section has 1 door & 2 adjustable full depth
shelves
• finished exterior & interior
15” DeepWidth
CB19 1/2-FHD
21” DeepWidth
CB19 1/2-FHD242 283
E2
349389
310400444
355
33 1/2"
19 1/2"
6 1/16"
22 7/16"
B A S E I R O N I N G B O A R D 19 1/2”
• 33 1/2” tall
• 19 1/2” wide
• 21” deep
• bottom section has 1 door & 1 adjustable full
depth shelf
• finished exterior & interior
• countertop overlay cannot exceed 1 1 /4”
21” DeepWidthCBIB 970
CLOSET BASES
33 1/2"
19 1/2", 25 1/2", 31 1/2", 37 1/2"
6 1/16"
7 5/16"
7 5/16"
7 5/16"
B A S E 3 D R A W E R
B A S E 4 D R A W E R
• 33 1/2” tall
• 19 1/2”, 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• 1/2” white vinyl wrapped particle board drawer boxes
mounted with precision steel ball bearing side mount full
extension guides
• 33 1/2” tall
• 19 1/2”, 25 1/2”, 31 1/2”, 37 1/2” wide
• 15”, 21” deep
• 1/2” white vinyl wrapped particle board drawer boxes
mounted with precision steel ball bearing side mount
full extension guides
E3
15” DeepWidth
CB3DR25 1/2
21” DeepWidth
CB3DR25 1/2CB3DR31 1/2 CB3DR31 1/2CB3DR37 1/2 CB3DR37 1/2
CB3DR19 1/2 CB3DR19 1/2
33 1/2"
19 1/2", 25 1/2", 31 1/2", 37 1/2"
6 1/16"
11 1/8"
11 1/8"
15” DeepWidth
CB4DR25 1/2
21” DeepWidth
CB4DR25 1/2CB4DR31 1/2 CB4DR31 1/2CB4DR37 1/2 CB4DR37 1/2
CB4DR19 1/2 CB4DR19 1/2
443
556500
387536
664600
473
491
614552
430596
736666
526
CLOSET BASES
B A S E M I N I 2 5 1/2” - 31 1/2”
• 18 3/8” Tall
• 25 1/2”, 31 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• Base top not suitable to support weight for seating,
additional top required
18 3/8"13 5/8"
25 1/2", 31 1/2"
18 3/8"13 5/8"
25 1/2", 31 1/2"
18 3/8"
25 1/2", 31 1/2"
B A S E M I N I P E N I N S U L A 2 5 1/2” - 3 1 1/2”
B A S E M I N I O P E N S H E L F 2 5 1/2”- 31 1/2”
• 18 3/8” Tall
• 25 1/2”, 31 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• Base top not suitable to support weight for seating, additional
top required
• 18 3/8” Tall
• 25 1/2”, 31 1/2” wide
• 15”, 21” deep
• finished exterior & interior
• Base top not suitable to support weight for seating, additional top
required
E4
15” DeepWidth
CBM25 1/2
21” DeepWidth
CBM25 1/2CBM31 1/2 CBM31 1/2
15” DeepWidth
CBMP31 1/2
21” DeepWidth
CBMP31 1/2CBMP25 1/2 CBMP25 1/2
15” DeepWidth
CBMOS31 1/2
21” DeepWidth
CBMOS31 1/2CBMOS25 1/2 CBMOS25 1/2
181164
208189
267242
299267
142124
168149
ACCESSORIES
T I E R A C K
• chrome tie rack mounted on 3/4 extension guide
• holds 25 ties
• can be attached to cabinet sides and end panels
• no factory installation available. To mount to non drilled
side of cabinets, slowly drill holes through existing interior
system holes with a sharp brad point 5 mm bit and scrap block
clamped or held tightly to other side (to prevent blowout), and
mount tie rack to exterior of cabinet with system screws
14"
2 7/16"
12 7/8" 9"
B E L T R A C K
V A L E T R O D
• chrome belt rack mounted on 3/4 extension guide
• holds 9 belts
• can be attached to cabinet sides and end panels
• no factory installation available. To mount to non drilled side of
cabinets, slowly drill holes through existing interior system holes
with a sharp brad point 5 mm bit and scrap block clamped or held
tightly to other side (to prevent blowout), and mount belt rack to
exterior of cabinet with system screws
• chrome valet rod closed length is 13 7/8”
• can be attached to cabinet sides and end panels
• no factory installation available. To mount to non
drilled side of cabinets, slowly drill holes through
existing interior system holes with a sharp brad point
5 mm bit and scrap block clamped or held tightly to
other side (to prevent blowout), and mount valet rod
to exterior of cabinet with system screws
F1
14"
2 5/16"
CTR 46
46CBR
CVR 61
F2
Jewelry Drawer Insert BJewelry Drawer Insert A
ACCESSORIES
P U L L O U T M I R R O R
• guides have detent in and out to hold mirror in place
• pulls out and pivots 60°
• 14” wide, 47 1/4” tall
• can be attached to cabinet sides and end panels
• 6” clear space required for mirror to pivot
• no factory installation available. To mount to non drilled side of cabinets, slowly drill holes
through existing interior system holes with a sharp brad point 5 mm bit and scrap block
clamped or held tightly to other side (to prevent blowout), and mount pull out mirror to
exterior of cabinet with system screws
J E W E L R Y D R A W E R I N S E R T S
• black felt jewelry inserts available in 6 1/16” tall drawers, in cabinets 25 1/2”
wide and over
• jewelry drawer insert B recommended for use with necklaces
• no factory installation available.
21 5/8"
12 3/4"
21 5/8"
12 3/4"
PM 890
JDI-B 147JDI-A 147
ACCESSORIES
U P R I G H T P A N E L
• 84”, 96” tall
• 15”, 21” deep
• available with no system holes, single sided, or
double sided system holes
• panels are able to be used in left or right
applications
• no UPS shipping available
• for mounting accessories on panels, without
double side line boring, slowly drill holes
through existing system holes with sharp 5 mm
brad point bit and scrap block clamped or held
tightly to other side (to prevent blowout), and
mount accessories with system screws
• panels will need to be mounted to wall and floor
for stability
Length96" Max
Width23" Max
E D G E - B A N D E D P A N E L
• 3/4” finished panels with matching finish edge-banding on all edges
to be used as closet base counter tops
• edge-banded panels are priced per square inch
• no UPS shipping available
F3
Depth 84” T 96” TUPN15 63 72UPN21 83 94
Depth 84” T 96” TUPD15 63 72UPD21 83 94
No Line Boring
Depth 84” T 96” TUPS15 63 72UPS21 83 94
Single Side Line Boring
Double Side Line Boring
CEPS .152Price Per Square Inch
ACCESSORIES
F I L L E R S
• 3/4” finished fillers with matching finish edge-banding on all edges
• 84 7/16”, & 95 3/4” tall fillers not available for UPS shipping
3"
3/4"
Length96" Max
Width23" Max
A D J U S T A B L E S H E L V E S
1 / 4 ” F I N I S H E D P A N E L
• 3/4” finished panels with matching finish edge-banding on all edges
• adjustable shelves include mounting hardware
• 1/4” finished panels are priced per square inch
• no UPS shipping available
F4
1/4FP .114Price Per Square Inch
CF3 24 11/16 34CF3 27 3/16 37CF3 29 3/4 41CF3 33 1/2 46CF3 83 7/8 117CF3 95 1/4 133
CAS .152Price Per Square Inch
F5
ACCESSORIES
P U L L D O W N C L O S E T R O D
• can be attached to cabinet sides and end panels
• width of clothes rod is adjustable
• telescoping pull rod adjustable from 34” to 50”
• PDCR1 is 21 1/2” - 26” wide
• PDCR1 is 26” - 35” wide
• PDCR3 is 35” - 48” wide
PDCR1 324PDCR2 341PDCR3 358
Pull Down Closet Rod
C A S E C O N N E C T I N G S C R E W S
• 5mm bore, steel with zinc finish
• 1 set contains 1 male and 1 female piece
• box contains 100 sets
CCS100 152 Price Per Box of 100
C L O S E T R O D
• 48” wide only
• may be field trimmed
• includes mounting hardware that fits system holes
CLR 23
F6
SHELF ACCESSORIES
B R I D G E S H E L F K I T
• includes shelf, 2 side cleats with screws for mounting, & rear hang rail
• 15”, 21” deep
• all components are edge banded on all edges
• 48” wide only, shelf and rear hang rail may be field trimmed
• align side cleats & rear hang rail to allow 3/4” at top to accommodate shelf
• side cleats include pre-drilled mounting holes that correspond with
cabinet/ panel system holes, allowing 3/4” spacing for shelf
• fasten rear hang rail to wall studs after aligning, fasteners not included
• install fasteners through top of shelf to side cleats & rear hang rail to
secure, fasteners not included
shelf
rear hang rail
side cleats
cabinet/panel side
3"
15", 21" CBSK-15DP 58CBSK-21DP 75
G1
SALES & PROMOTIONAL ITEMS
12 1/2” X 15 1/2” C O L O R S A M P L E D O O R
• sample doors are 12 1/2” wide by 15 1/2” tall
• please specify Style for sample doors
8 1/2” X 1 1” C O L O R S A M P L E D O O R
• sample doors are 8 1/2” wide by 11” tall
• please specify Style for sample doors
SD121/2151/2 155
8 1/2X11 65
Price
PHONE: 573-624-3526FAX: 573-624-6671
HingeL/R
Dealer:
Special Instructions:
Description Please Refer to Catalog
Style:
Dealer #:
Salesperson:
THIS ORDER FOR PRODUCTION IS FINAL. AFTER RECEIPT OF CONFIRMATION OF THIS ORDER CHANGES OR CANCELLATIONS WILL BE ALLOWED FOR A TIME PERIOD 24 HOURS ONLY. REFER TO THE CHANGE ORDER SECTION OF THE DAVANTI CATALOG FOR SPECIFIC DETAILS.
Job Name:
Order Date:
Dealer P.O.#
Hardware Finish: (Choose One)*Satin Nickel NoneChromeMatte Black
*Multiple hardware options not available on same order
Manufactured & Distributed by W. W. Wood Products Inc.P. O. Box 50 Dudley, MO 63936
Oil Rubbed Bronze
Qty.Ord.
1
Cab.No.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
21
22
23
24
25
20
Glass Frame Door Trim Finish: (Choose One)**Natural AluminumBlack Aluminum
**Multiple trim colors not available on same order. Doors not available without trim.Brown Aluminum
Manufactured by:W. W. Wood Products Inc. A family-owned company.P.O. Box 50 12140 Main St. Dudley, MO 63936
Prices and specifications subject to change. Due to limitations in printing or changes in manufacturing, the finishes and products shown may not be accurately represented or are no longer available. Visit a retailer to view samples and confirm availability.