catalogo cables
TRANSCRIPT
Carr Hill, Doncaster, South YorkshireDN4 8DG United Kingdom
Phone: +44(0) 1302 344010Fax: +44(0) 1302 360006Email: [email protected]
www.bridon.com
High quality performance wire ropes for the craneindustry and other specialist applications
Cranes
Des
igne
d by
Isle
Gro
up, T
el: +
44 (
0) 1
302
3255
55
E
ditio
n 4,
09/
2006
ContentsIntroduction...................................... 2-3
Product Selection ..........................4-11
Products........................................12-20
Terminations..................................21-30
Contacts ............................................31
Drawing from a background of long standing
experience and technology, Bridon is an acknowledged
world leader in the design, manufacture, development and
supply of wire & rope to meet the needs of the crane industry.
ISO 9001
Bridon operates quality managementsystems which comply with the
requirements of EN ISO 9001:2000.These systems are assessedand registered by accredited
certification bodies.
ISO 14001
Bridon operates environmentalmanagement systems which, where
required by legislation or risk, complywith the requirements of EN ISO
14001:2004 and are assessed andregistered by accredited
certification bodies.
Bridon - the world’sleading specialist inthe manufacture of wireand rope solutions forthe most demandingapplications, deliveringreassurance throughunrivalled experience.
High quality performance wireropes for the crane industry and
other specialist applications
02 03
High quality ropes for cranes,hoists and general engineeringoffering improved performance.
All statements, technical information and recommendationscontained herein are believed to be reliable, but no guarantee isgiven as to their accuracy and/or completeness. The user mustdetermine the suitability of the product for his own particularpurpose, either alone or in combination with other products andshall assume all risk and liability in connection therewith.
Whilst every attempt has been made to ensure accuracy in thecontent of the tables, the information contained in this cataloguedoes not form part of any contract.
Before using any products contained within this brochureread, understand and follow the guidance given in ISO 4309:2004 Cranes - Wire Ropes - Care, Maintenance,Installation, Examination and Discard.
For Offshore Cranes refer to API RP 2D RecommendedPractice for Operation and Maintenance of Offshore Cranes.
Product Selection Product Selection
04 05
Tower Cranes
Endurance DYFORM® 34LR & 34LR-PI
• Low rotation• Recommended for high heights of lift• Crush resistant • Reduced sheave wear• Long service life• Reduced downtime• High breaking forceSee page 12
Endurance 35LS
• Low rotation• Flexible construction• Excellent spoolingSee page 13
Endurance DYFORM® 6• Plastic Bristar profile encapsulated core• Robust crush resistant Dyform construction• Reduced stretch • Consistent performance • Exceptional service life See page 15
Endurance DYFORM® 8-PI
• Plastic encapsulated core• Robust resistant Dyform construction • Reduced stretch• Recommended for multi-layer coiling • Flexible eight strand construction• High breaking forceSee page 16
Endurance DYFORM® DSC8
• Parallel-laid eight strand• Dyform construction • Very high breaking force• Crush resistant • Recommended for multi-layer coiling • Only recommended for boom hoist applications where both ends are fixedSee page 17Endurance 50DB
• High breaking force • Excellent resistance to rotation• Good flexibility• Good wear characteristicsSee page 13
Endurance DYFORM® 6
• Long service life• Crush resistant • Reduced downtime• Lower lifetime cost• Robust construction• Suitable for multi-layer spooling See page 14
Constructex• Exceptional service life in the most demanding applications• Excellent crush resistance• High breaking force• Rotary hammer swaged for maximum resistance to damage• Consistent diameterSee page 19
Container Cranes
Endurance DYFORM® 6
• Exceptional service life• Robust crush resistant Dyform construction• Accurate diameter for effective multi-layer spooling • Consistent performance • Long life, reduced downtime costs See page 14
•Trolley Rope
•Derricking Rope
•Main Hoist Rope
•Trolley Rope
•Boom Hoist Rope
•Main Hoist Rope
DYFORM® Dyform outer strands provide controlled diameter with increased cross sectional steel area offering higherbreaking strength, the smooth surface of the Dyform strand facilitates even load distribution resulting inexcellent crush resistance and wear performance.
High quality ropes for cranes, hoists and general engineering offering improved performance.
Patented plastic encapsulated core, engineered to give full protection and define the workingcharacteristics of the final rope.
FFAATTIIGGUU
EE
The “Powercheck” symbol means that BRIDON has carried out a destruction test on a sample ofrope from each production length.
BRIDON has an active program to determine the rotational properties of its range of RotationResistant and low Rotation ropes. BRIDON has developed its own torque turn testing machine andhas adopted a "Twistcheck" testing program for each product and is able to provide actualproperties for any rope.
BRIDON has an active program to determine fatigue properties and specifies material of specificdimensions and properties, which will enhance fatigue performance. BRIDON design andmanufactures its ropes with fatigue in mind and has machines for fatigue testing crane ropes.
High quality ropes for cranes, hoists and general engineering.
Product Selection Product Selection
06 07
Endurance DYFORM® 8-PI
• Plastic encapsulated core • Robust crush resistant Dyform construction • Reduced stretch • Flexible eight strand construction • High breaking force See page 16
Endurance 35LS
• Low rotation • Good flexibility • Recommended for high heights of lift• Suitable for single-part and multi-part reeving See page 13
Endurance 50DB
• Highest breaking force • Excellent resistance to rotation• Good flexibility• Good wear characteristics• Lubricated during manufacture with high performance lubricant See page 13
Endurance DYFORM® 6
• Exceptional service life• Robust crush resistant Dyform construction• Accurate diameter, recommended for multi-layer coiling• Long life, reduced lifetime costsSee page 14
Endurance DYFORM® 8-PI
• Plastic encapsulated core• Robust crush resistant Dyform construction• Reduced stretch• Recommended for multi-layer coiling• Flexible eight strand construction• High breaking forceSee page 16
Endurance DYFORM® DSC8
• Parallel-laid eight strand Dyform construction• Very high breaking force • Crush resistant• Recommended for multi-layer coiling • Only recommended for boom hoist applications where both ends are fixedSee page 17
Constructex • Exceptional service life in the most demanding applications • Excellent crush resistance • High breaking force• Rotary hammer swaged for maximum resistance to damageSee page 19
Endurance DYFORM® 6• Plastic Bristar profile encapsulated core• Robust crush resistant Dyform construction• Reduced stretch • Exceptional service lifeSee page 15
DYFORM®
• Plastic encapsulated core incorporating plastic sections between outer strands• Robust crush resistant Dyform construction• Exceptional fatigue properties, long life• Reduced stretch• Reduced lifetime costs See page 15
Unloader Cranes
Endurance DYFORM® 6
• Exceptional service life• Robust crush resistant Dyform construction • Accurate rope diameter • Long life, reduced lifetime costsSee page 14
Mobile Lattice Boom Cranes
Endurance DYFORM® 34LR & 34LR-PI
• Low rotation Dyform• Recommended for high lifting operations• High strength• Reduced rope sheave wear• Accurate diameter, recommended for multi-layer coiling• Suitable for single part and multi-part reeving• Long service lifeSee page 12
•Boom Hoist Rope
•Racking Rope
•Main Hoist Rope
•Grab Closing Rope
•Boom Hoist Rope
•Main Hoist Rope
Endurance 35LS
• Low rotation• Recommended for high heights of lift• Good flexibility• Suitable for single-part and multi-part reevingSee page 13
Endurance 50DB
• High breaking force• Excellent resistance to rotation• Good flexibility• Good wear characteristics• Lubricated during manufacture with high performance lubricantSee page 13
Telescopic Mobile Cranes
Endurance DYFORM® 34LR & 34LR-PI
• Low rotation• Long service life• Crush resistant• Recommended for multi-layer coiling• Recommended for high heights of lift• Suitable for single-part and multi-part reevingSee page 12
•Main Hoist Rope
Product Selection Product Selection
08 09
Endurance 35LS
• Low rotation• Flexible construction• Excellent spooling See page 13
Endurance 35LS
• Low rotation • Flexible construction • Excellent spooling • Recommended for high lifting operations typically found in the North SeaSee page 13
Endurance 50DB
• Highest breaking force of all conventional low rotation and rotationresistant ropes
• Excellent resistance to rotation• Unique strand and rope construction • Excellent wear characteristics • Lubricated during manufacture with an exclusive Bridon productSee page 13
Endurance DYFORM® 6
• Exceptional service life• Robust crush resistant Dyform construction• Accurate diameter, recommended for multi-layer coiling • Long-life, reduced lifetime costs See page 14
Endurance DYFORM® 8-PI
• Plastic encapsulated core• Robust crush resistant Dyform construction• Reduced stretch• Recommended for multi-layer coiling • Long life, reduced lifetime costsSee page 16
Endurance DYFORM® DSC8
• Parallel laid rope • Very high breaking force• Exceptional service life• Crush resistant See page 17
Endurance 50DB
• Highest breaking force of all conventional low rotation and rotationresistant ropes
• Excellent resistance to rotation• Unique strand and rope construction • Excellent wear characteristics • Lubricated during manufacture with an exclusive Bridon productSee page 13
Endurance DYFORM® 6
• Exceptional service life• Robust crush resistant Dyform construction • Accurate diameter, recommended for multi-coiling • Long-life, reduced lifetime costs See page 14
Endurance DYFORM® 8-PI
• Plastic encapsulated core • Robust crush resistant Dyform construction• Reduced stretch • Recommended for multi-layer coiling • Flexible eight strand construction• High breaking forceSee page 16
Endurance DYFORM® DSC8
• Parallel laid rope• Very high breaking force• Crush resistant See page 17
Constructex• Exceptional service life in the most demanding applications• Excellent crush resistance• High breaking force• Rotary hammer swaged for maximum resistance to damage See page 19
Dockside Cranes Offshore Pedestal Cranes
Endurance DYFORM® 34LR & 34LR-PI
• Low rotation Dyform• Recommended for high lifting operations• High strength• Reduced rope sheave wear• Accurate diameter, recommended for multi-layer coiling • Suitable for single part and multi-part reeving • Long service life See page 12
Endurance DYFORM® 34LR & 34LR-PI
• Low rotation Dyform• Recommended for high lifting operations• High Strength• Reduced rope sheave wear• Accurate diameter, recommended for multi-layer coiling • Suitable for single part and multi-part reeving • Long service lifeSee page 12
•Boom Hoist Rope
•Main Hoist Rope•Boom Hoist Rope
•Main Hoist Rope
•Whip Hoist Rope
Product Selection Product Selection
10 11
Endurance 35LS
• Low rotation• Flexible construction• Excellent spooling • Recommended for high lifts See page 13
Endurance 50DB
• Highest breaking force of all conventional low rotation and rotationresistant ropes
• Excellent resistance to rotation• Good wear characteristics• Unique strand and rope constructionSee page 13
Endurance DYFORM® DSC8
• Parallel or double seale closed rope • Robust crush resistant Dyform construction• Very high breaking strength • Exceptional service value• Accurate diameter • Long life, reduced lifetime costsSee page 17
Endurance DYFORM® 6
• Exceptional service life• Robust crush resistant Dyform construction • Accurate diameter• Long-life, reduced lifetime costsSee page 14
Endurance DYFORM® 8
• Excellent service life • Lower downtime• Flexible eight strand construction• High temperature lubricant• Consistently high quality • Reduced lifetime costs See page 16
Endurance DYFORM® 6
• Tough robust six strand Dyform rope• Crush resistant • Accurate rope diameter for effective spooling • Long service life• Reduced downtime• Lower lifetime costsSee page 14
Constructex• Exceptional service life in the most demanding applications• Rotary hammer swaged for maximum resistance to damage• Robust construction See page 19
Overhead Cranes Piling Ropes
Endurance DYFORM® 34LR & 34LR-PI
• Low rotation Dyform• High breaking strength• Crush resistantSee page 12
Sea Plough Ropes
Endurance DYFORM® 34LR & 34LR-PI
• Low rotation Dyform• Recommended for high lifting operations• High strength• Reduced rope sheave & drum wear• Accurate diameter • Suitable for single part and multi-part reeving • Long service lifeSee page 12
Endurance DYFORM® 34LR & 34LR-PI
• Low rotation Dyform• High breaking force• Excellent service life• Good resistance to abrasive wear• Resists crushing in multi-layer coilingSee page 12
Oceanographic Winch Ropes
Ocean 3
• Torque balanced three strand construction• Excellent resistance to rotation• Good resistance to corrosionSee page 20
•Main Hoist Rope
•Main Hoist Rope
•Main Hoist Rope
•Pipe Handling Rope
•Main Hoist Rope
•Plough Rope
•Winch Rope
Diameter
mm
EIPS / 1960 grade
Minimum breaking force (Fmin)
EEIPS / 2160 grade @20% load
Axialstiffness
Torque generated @20% load Metallic
crosssectionLang’sOrdinary
mm2kg/m kN tonnes kN tonnes MN kN.mkN.m
Approx.nominal lengthmass
101112131415161718192021222324252627282930323435363840
4244464850525456586062646668
70727476
0.510.620.730.850.971.141.301.401.591.781.972.222.402.612.863.123.403.563.914.254.455.055.746.026.447.128.07
8.849.6110.611.512.313.614.515.616.818.019.220.521.723.1
24.525.927.328.8
Products Products
12 13
Endurance DYFORM® 34LR & 34LRPI
90.0109130154179205232260298329370400442480528572618662716765823940
10601120118013201470
16201770193021202260245027502840302032003370353038404070
4430468049105150
9.1711.113.315.718.220.923.626.530.433.537.740.845.148.953.858.363.067.573.078.083.995.8108114120135150
165180197216230250280290308326344360391415
452477501525
98.1118140166191220251284319356397432482525569620658718784829900
103011501210128014301580
10.012.014.316.919.522.425.629.032.536.340.544.049.153.558.063.267.173.279.984.591.7
105.0117123130146161
6.07.28.6
10.111.713.515.317.319.421.623.926.428.931.634.437.440.443.646.950.353.861.269.173.377.586.495.7
103.5113.6124.2135.2146.7158.7171.1184.0197.4211.3225.6240.4255.6271.3
280.9297.2313.9331.1
0.0010.0020.0020.0030.0040.0050.0060.0070.0090.0100.0120.0130.0160.0180.0200.0230.0260.0290.0320.0350.0400.0480.0580.0630.0680.0800.094
0.2450.2800.3200.3660.4070.4590.5350.5730.6310.6910.7520.8130.9120.996
1.1161.2131.3081.409
0.0030.0040.0060.0070.0090.0110.0130.0160.0190.0230.0270.0300.0350.0400.0460.0510.0580.0640.0720.0800.0890.1080.1300.1410.1530.1810.212
0.3810.4360.4970.5700.6330.7130.8320.8910.9811.0751.1701.2651.4191.550
1.7371.8872.0352.192
607286
101117135153173194216239264289316344374404436469503538612691733775864957
10251125122913391453157116941822195420922233238025312687
2754291330783246
Diameter
mm
EIPS / 1960 grade
Minimum breaking force (Fmin)
EEIPS / 2160 grade @20% load
Axialstiffness
Torque generated @20% load Metallic
crosssection
mm2kg/m kN tonnes kN tonnes MN kN.mkN.m
Lang’sOrdinary
Approx.nominal lengthmass
101112131415161819202122232425262832
0.450.550.640.760.881.031.161.451.651.802.002.222.402.642.843.093.594.46
Endurance 35LS
75.490.6106127147170193241275299333368398439471514596765
7.699.2410.812.915.017.319.724.628.030.533.937.540.644.848.052.460.878.0
86.0104124145167190220275310335368410446495534578677861
8.7710.612.614.817.019.422.428.031.634.137.541.845.550.554.458.969.087.8
4.885.907.038.259.56
10.9812.4915.8117.6119.5221.5223.6125.8128.1030.4932.9838.2549.96
0.0030.0040.0050.0060.0070.0090.0110.0160.0190.0220.0250.0290.0330.0380.0420.0480.0600.088
0.0010.0020.0020.0030.0030.0040.0050.0070.0080.0100.0110.0130.0150.0170.0190.0210.0270.039
5061728599
113129163182201222243266290314340394515
FFAATTIIGGUU
EE
FFAATTIIGGUU
EE
Figures shown are for guidance purposes only. For details specific to your requirement please contact Bridon Figures shown are for guidance purposes only. For details specific to your requirement please contact Bridon
Read the cautionary notice - restrictions on the use of large diameter multistrand ropes informationat www.bridon.com/restrictionsonlargediamultistrandropes
Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Read the cautionary notice - restrictions on the use of large diameter multistrand ropesinformation at www.bridon.com/restrictionsonlargediamultistrandropes
Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Diameter
mm
Minimum breaking force (Fmin)
EEIPS / 2160 grade @20% load
Axialstiffness
Torque generated@20% load Metallic
cross sectionLang’s
mm2kg/m kN tonnes MN kN.m
Approx. nominal length mass
89
10111213141516171819202122
0.280.340.430.520.620.730.840.961.101.211.361.561.681.852.06
Endurance 50DB
56.068.686.0104124145168190220240275310335368410
5.716.998.7710.612.614.817.119.422.424.528.031.634.137.541.8
3.023.834.725.726.807.989.26
10.6312.0913.6515.3017.0518.8920.8322.86
0.0030.0040.0060.0080.0110.0140.0170.0210.0250.0290.0360.0420.0480.0560.065
31394858698194
108123139156174193213233
FFAATTIIGGUU
EE Read the cautionary notice - restrictions on the use of large diameter multistrand ropesinformation at www.bridon.com/restrictionsonlargediamultistrandropes
Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Dyform 34x7
Dyform 34x19
Dyform 34x31
Products Products
14 15
Diameter
mm
EIPS / 1960 grade
Minimum breaking force (Fmin)
EEIPS / 2160 grade @20% load
Axialstiffness
Torque generated@20% load Metallic
crosssectionLang’sOrdinary
mm2kg/m kN tonnes kN tonnes MN kN.mkN.m
Approx.nominal lengthmass
89
101112131415
161718192022242628303234363840424446
4850
0.300.380.470.580.650.800.941.06
1.171.391.531.661.822.172.663.133.594.144.695.095.926.437.157.918.599.29
10.311.2
Endurance DYFORM® 6 & 6PI
54.669.185.398.1114147169194
217245275302333398487576655755844913
106011601290142015001660
18801970
5.577.048.7010.011.615.017.219.8
22.125.028.030.833.940.649.658.766.877.086.093.1108118131145153169
192201
60.878.591.5113127157183208
228270298323355423518610700806914960
112011901320
6.208.009.3311.512.916.018.721.2
23.227.530.432.936.243.152.862.271.482.293.297.9114121135
3.584.535.606.778.069.4611.012.6
13.515.217.119.021.125.530.435.641.347.454.060.968.376.184.393.0102112
121132
0.0060.0090.0120.0150.0190.0260.0330.040
0.0480.0570.0680.0790.0920.120.160.210.250.310.370.430.530.610.710.820.911.05
1.251.36
0.0100.0140.0190.0240.0300.0420.0520.063
0.0760.0910.110.130.150.190.250.330.400.490.590.680.830.961.121.301.441.66
1.972.15
34.443.653.865.177.590.9105121
129145163181201243289339394452514580651725803886972
1062
11571255
Figures shown are for guidance purposes only. For details specific to your requirement please contact Bridon Figures shown are for guidance purposes only. For details specific to your requirement please contact Bridon
Diameter
mm
EIPS / 1960 grade
Minimum breaking force (Fmin)
EEIPS / 2160 grade @20% load
Axialstiffness
Torque generated@20% load Metallic
crosssectionLang’sOrdinary
mm2kg/m kN tonnes kN tonnes MN kN.mkN.m
Approx.nominal lengthmass
1617181920222426283032343638
1.171.391.531.661.822.172.663.133.594.144.695.095.926.43
Endurance DYFORM® 6
217245275302333398487576655755844913
10601160
22.125.028.030.833.940.649.658.766.877.086.093.1108118
228270298323355423518610700806914960
11201190
23.227.530.432.936.243.152.862.271.482.293.297.9114121
14.516.418.420.522.727.432.638.344.451.058.065.573.581.8
0.0480.0570.0680.0790.0920.1210.1610.2070.2530.3130.3730.4280.5270.608
0.0760.0910.1080.1250.1450.1910.2550.3260.4000.4940.5890.6770.8320.961
133150168188208252300352408468532601674751
FFAATTIIGGUU
EE Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Langs Lay must not be selected for use in any application where either end of the rope is free to rotate.
Diameter
kNKg/mmm
Approximate massMinimum breaking force
kN
1670 N/mm2 1820 N/mm2
4142434445464748495051525354555657585960
6.697.027.367.708.068.779.159.559.95
10.3610.7811.2111.6412.0812.5413.0013.4613.9414.4314.92
DYFORM®
9911039108911411193128213391396145515151576163917021767183319001969203921092182
10721125117912351291138814491511157516401706177418431913198420572131220622832361
Read the product safety instructions and warnings on the use of steel wire rope at www.bridon.com/productsafetybefore selecting or using this product.
FFAATTIIGGUU
EE Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Langs Lay must not be selected for use in any application where either end of the rope is free to rotate.
Dyform 6x26WS
Dyform 6x36WS
Dyform 6x41WS
Dyform Zebra 6x31WS
Products Products
1617Figures shown are for guidance purposes only. For details specific to your requirement please contact BridonFigures shown are for guidance purposes only. For details specific to your requirement please contact Bridon
Diameter
mm
EIPS / 1960 grade
Minimum breaking force (Fmin)
EEIPS / 2160 grade @20% load
Axialstiffness
Torque generated@20% load Metallic
crosssectionLang’s
mm2kg/m kN tonnes kN tonnes MN kN.m
Ordinary
kN.m
Approx.nominal lengthmass
1011121314151617
18192022242628303234
3638404244464850
0.450.570.650.770.891.061.161.35
1.501.671.842.222.653.153.674.254.855.43
6.066.787.558.429.2510.111.112.0
Endurance DYFORM® 8 & 8PI
87.3105126147171198224253
283316350424505592687789897
1010
11381265140215301697185320202197
8.9010.7012.815.017.420.222.825.8
28.832.235.743.251.560.370.080.491.4103
116129143156173189206224
238271
303337374452539633735843958
1079
12161353150016481814198121572344
24.327.6
30.934.438.146.154.964.574.985.997.7110
124138153168185202220239
5.26.37.48.7
10.111.613.214.9
16.818.720.725.029.834.940.546.552.959.8
67.074.782.791.2100109119129
0.010.020.020.030.030.040.050.06
0.070.080.100.130.170.220.270.330.400.48
0.570.670.790.901.051.191.361.54
0.020.020.030.030.040.050.060.08
0.090.110.130.170.220.280.350.430.520.62
0.740.871.011.161.341.531.751.98
52637487
101116132149
168187207250298349405465529598
670747827912
1001109411911293
FFAATTIIGGUU
EE Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Langs Lay must not be selected for use in any application where either end of the rope is free to rotate.
Diameter
mm
EIPS / 1960 grade
Minimum breaking force (Fmin)
EEIPS / 2160 grade @20% load
Axialstiffness
Torque generated@20% load Metallic
crosssectionLang’sOrdinary
mm2kg/m kN tonnes kN tonnes MN kN.mkN.m
Approx.nominal lengthmass
10
11121314151617181920222426283032
0.50
0.590.720.830.951.121.261.411.571.791.972.362.783.273.874.405.04
Endurance DYFORM® DSC8
94.1
111137158180212238267298339373446525618732833953
9.59
11.314.016.118.321.624.327.230.434.638.045.553.563.074.684.997.1
103
121150172197232260292326371408487574677801911
1040
10.5
12.315.317.520.123.626.529.833.237.841.649.658.569.081.792.9106
6.12
7.418.81
10.3512.0013.7715.6717.6919.8322.1024.4929.6335.2641.3847.9955.0962.68
0.021
0.0270.0360.0450.0550.0700.0840.1000.1180.1420.1640.2160.2770.3530.4510.5500.671
0.015
0.0200.0270.0330.0410.0520.0620.0740.0870.1040.1210.1590.2040.2600.3320.4050.494
58
718499
114131149168189210233282336394457525597
FFAATTIIGGUU
EE Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Langs Lay must not be selected for use in any application where either end of the rope isfree to rotate.
Diameter
mm
EIPS / 1960 grade
Minimum breaking force (Fmin)
EEIPS / 2160 grade @20% load
Axialstiffness
Torque generated@20% load Metallic
crosssectionLang’s
mm2kg/m kN tonnes kN tonnes MN kN.m
Ordinary
kN.m
Approx.nominal lengthmass
12131416
18192022242628303234
3638
0.590.690.801.04
1.321.471.631.972.342.753.193.664.174.71
5.275.88
Endurance 8
100118137179
226252279338402472547628715807
9041008
10.212.014.018.2
23.025.728.434.541.048.155.864.072.982.3
92.2103
111130151197
249278308372443520603692787889
9971110
11.313.315.420.1
25.428.331.437.945.253.061.570.580.290.6
102113
6.47.68.811
15161822263035404652
5865
0.0170.0210.0270.040
0.0570.0670.0780.1040.1350.1720.2140.2640.3200.384
0.4560.536
0.0220.0280.0350.052
0.0730.0860.1000.1340.1740.2210.2760.3390.4120.494
0.5860.689
667790
117
148165183221263309358411468528
592660
FFAATTIIGGUU
EE Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Langs Lay must not be selected for use in any application where either end of the rope is free to rotate.
Dyform 8x19S Dyform DSC 8x19S
Dyform DSC 8x26WS
Dyform 8x26WS
Endurance 8x19S
Endurance 8x25F
Endurance 8x36WS
Dyform 8x36WS
Diameter
mm
IPS / 1770 grade
Minimum breaking force (Fmin)
EIPS / 1960 grade @20% load
Axialstiffness
Torque generated@20% load Metallic
crosssectionLang’s
mm2kg/m kN tonnes kN tonnes MN kN.m
Ordinary
kN.m
Approx.nominal lengthmass
6789
10111213141618192022242628323638404448525660
0.140.200.260.320.400.480.580.680.781.021.301.441.601.942.302.703.144.105.185.786.407.749.2210.812.514.4
22.730.940.351.063.076.290.7106124161204227252305363426494645817910
101012201450170019802270
2.313.154.115.206.427.779.2510.812.616.420.823.125.731.137.043.450.465.783.392.8103124148173202231
25.134.244.756.569.884.4100118137179226252279338402472547715904
1010112013501610189021902510
2.563.494.565.767.128.6010.212.014.018.223.025.728.434.541.048.155.872.992.2103114138164193223256
1.662.272.963.754.625.606.667.829.0611.815.016.718.522.426.631.336.347.459.966.874.089.5107125145166
0.0020.0030.0050.0070.0100.0130.0170.0210.0270.0400.0570.0670.0780.100.140.170.210.320.460.540.630.831.081.381.722.11
0.0030.0040.0060.0090.0130.0170.0220.0280.0350.0520.0730.0860.100.130.170.220.280.410.590.690.811.071.391.772.212.71
16.222.028.736.444.954.364.775.988.0115145162180217259304352460582648718869
1034121414081616
FFAATTIIGGUU
EE
Class 6x19 Steel Core
Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Langs Lay must not be selected for use in any application where either end of the rope is free to rotate.
Products Products
18 19Figures shown are for guidance purposes only. For details specific to your requirement please contact Bridon Figures shown are for guidance purposes only. For details specific to your requirement please contact Bridon
Diameter
mm
IPS / 1770 grade
Minimum breaking force (Fmin)
EIPS / 1960 grade @20% load
Axialstiffness
Torque generated@20% load Metallic
crosssectionLang’s
mm2kg/m kN tonnes kN tonnes MN kN.m
Ordinary
kN.m
Approx.nominal lengthmass
89
10111213141618192022242628323638404448525660
0.260.330.410.500.590.690.801.051.331.481.641.982.362.763.214.195.305.916.547.929.4211.112.814.7
40.351.063.076.290.7106124161204227252305363426494645817910
101012201450170019802270
4.115.206.427.779.2510.812.616.420.823.125.731.137.043.450.465.783.392.8103124148173202231
44.756.569.884.4100118137179226252279338402472547715904
1010112013501610189021902510
4.565.767.128.6010.212.014.018.223.025.728.434.541.048.155.872.992.2103114138164193223256
3.063.884.785.796.898.089.3812.215.517.319.123.227.632.337.549.062.069.176.592.6110129150172
0.0050.0070.0100.0130.0170.0210.0270.0400.0570.0670.0780.100.140.170.210.320.460.540.630.831.081.381.722.11
0.0060.0090.0130.0170.0220.0280.0350.0520.0730.0860.100.130.170.220.280.410.590.690.811.071.391.772.212.71
29374656667890
118149166184223265311361471596664736891
1060124414431656
FFAATTIIGGUU
EE
Class 6x36 Steel Core
Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Langs Lay must not be selected for use in any application where either end of the rope is free to rotate.
Diameter
mm ins
EIPS / 1960 grade
Minimum breaking force (Fmin)
@20% load
Axialstiffness
Torque generated@20% load Metallic
crosssectionOrdinary
mm2kg/m lb/ft kN tonnes tons(200lbs) MN kN.m
Approx. nominal length mass
15.919.122.225.428.631.834.938.141.344.5
5/8
3/4
7/8
11.1/8
1.1/4
1.3/8
1.1/2
1.5/8
1.3/4
Constructex
1.341.642.232.983.874.765.666.857.899.23
0.901.101.502.002.603.203.804.605.306.20
227325432556707868
1059123714411646
23.133.144.056.772.188.5108126147168
25.536.548.562.579.597.5119139162185
1522303950617488
103120
0.0510.0870.1340.1980.2830.3870.5170.6600.8331.025
143206279365463572689822965
1121
FFAATTIIGGUU
EE Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Langs Lay must not be selected for use in any application where either end of the rope is free to rotate.
Products Terminations
20 21
Diameter
mm
Minimum breaking force (Fmin)
1470 grade 316S31
Axial stiffness @20% load
Metallic cross section
mm2kg/m kN tonnes MN
Approx. nominal length mass
2.53.03.54.0
5.06.07.08.0101112
1416
19
0.0340.0490.0670.088
0.1350.1940.2600.3450.5400.6800.807
1.151.47
2.06
DYFORM® Stainless Steel Strand
6.779.8113.217.5
23.934.848.260.395.8119141
189245
314
0.691.001.351.78
2.443.554.916.159.7712.114.4
19.325.0
32.0
0.70.91.31.7
2.63.85.16.7
10.512.715.1
20.626.9
37.9
4.496.478.8111.5
18.025.935.246.071.987.0104
141184
260
FFAATTIIGGUU
EE Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Construction 1x7
Construction 1x19
Construction 1x25
Construction 1x31
Figures shown are for guidance purposes only. For details specific to your requirement please contact Bridon
Forged Steel - Quenched and Tempered.
Forged from 1035 Carbon Steel.
Excellent welding qualities.
Widely used on farm machinery, trucks, steel hulled marine vessels and material handling equipment.
Reference American Welding Society specifications for proper welding procedures.
Sizenumber*
S-264 stock
number
Weight per100 (kg)
B C D E G H L
1.272.954.729.5723.737.4
6.359.6516
19.125.431.8
4.856.356.359.6514.217.5
1622.425.426.936.644.5
7.8510.411.212.719.820.6
1622.428.738.15467
2.33.3
4.054.855.6
6.35
19.126.233.341.459.570
109072210907401090768109078610908021090820
* 0* 1* 1.5
245
Pad Eyes S-264
Dimensions (mm)
Nominal diameterRope grade 1960
Minimum breaking force
TonneskNmm kg/100m
Approx. mass
131416192226283032
56.066.086.0121162226262301342
Ocean 3
132153199281377526610700797
13.515.620.328.738.453.662.271.481.3
FFAATTIIGGUU
EE Read the product safety instructions and warnings on the use of steel wire rope atwww.bridon.com/productsafety before selecting or using this product.
Ocean 3 in Langs Lay must not be selected for use in any application where either end of the ropeis free to rotate.
*Meets the requirements of Military Specification MS-51930A
Terminations Terminations
22 23
Nominal size
(dia of rope)a b d
(min) c h lApproximateweight per 100 pieces
mm mm mm mm mm mm mm kg
81012141618202224262832364044
91113161820222426293135404448
1517.520
23.526
28.531
33.536
39.54247535863
172124293235404346495258657176
405060708090
100110120130140160180200220
4.56
7.59
10.512
13.515
16.5182023262932
668298
114130145161177193209224256288320352
18.131.851.579.989.5121161211271355420630884
11001500
Solid Thimble - to DIN 3091
Nominal size
(dia of rope)Q B C E F
(min) G M(max)
mm mm mm mm mm mm mm mm
89
1113141618192022242628323538
25.431.838.144.444.450.857.263.563.569.876.282.688.9102114127
34.944.452.460.360.369.879.485.785.795.2105114124140156171
11.114.317.520.620.622.225.428.628.631.833.336.539.744.450.857.2
47.657.269.882.682.695.2105118118127140152165191210235
7.911.112.714.314.315.919.022.222.223.825.427.030.233.338.141.3
4.86.47.17.97.99.5
11.111.111.112.714.315.917.519.020.622.2
12.715.919.022.222.225.428.631.831.834.938.141.344.450.857.263.5
Solid Thimble - to BS464:1958
Nominal size
(dia of rope)a b c s p
(min) hApproximateweight per 100 pieces
mm mm mm mm mm mm mm kg
468
1012141618202224262832364044
579
1113161820222426293135404448
912131619222527303337465055606570
101520253035404550556065708090
100110
2.12.6456789
101011121214161820
5.17.1111416171921232427303338424653
2030405060708090
100110120130140160180200220
1.22.85.7
15.22438526688
104129260277440460700
1000
Ordinary Thimble - to DIN 3090
Nominal size
(dia of rope)DC
(min)BA E F(min) G J
(approx)K
(min) Q
mm mm mm mm mm mm mm mm mm mm mm
89
1113141617192122242529323538
22.225.428.631.831.841.344.450.850.857.263.569.876.295.2105114
38.147.654.058.758.774.679.492.192.1102110119133152175197
12.714.317.520.620.622.228.628.628.631.833.334.938.141.347.654.0
33.338.141.344.444.458.766.773.073.082.692.1108111133152165
54.063.573.079.479.498.4108124124133146162178197229254
7.910.312.714.314.315.919.020.620.622.225.427.028.633.338.141.3
4.06.47.97.97.98.79.5
11.111.112.712.714.315.915.919.023.8
63.576.276.288.988.9114127152152165178203229254305330
4.04.84.85.65.67.97.99.59.59.5
10.310.312.712.715.917.5
30.234.938.142.942.957.260.369.869.876.284.190.5102121137149
Ordinary Thimble
Terminations Terminations
24 25
Forged Steel Sockets through 38 mm, cast alloy steel 40 mm through 100 mm.
Spelter socket terminations have an efficiency rating of 100%, based on the cataloguestrength of wire rope. Ratings are based on the recommended use with 6 x 7, 6 x 19 or 6 x 37, IPS or XIP (EIP) , XXIP (EEIP), RRL, FC or IWRC wire rope.
Closed grooved Sockets meet the performance requirements of Federal Specification RR-S-550D, Type B, except for those provisions required of the contractor.
NOTE: All cast steel sockets 40 mm and larger are magnetic particle inspected andultrasonic inspected. Proof testing available on special order.
Drawing illustrates one groove used on sockets 6 mm through 19 mm. Sizes 22 mm through38 mm use 2 grooves. Sizes 40 mm and larger use 3 grooves.
Rope dia.
(mm)*
Structuralstrand
dia.(mm)
Stock no.
G-417 galv. A B C D** F G H J K L
10398971039913103993110399591039977103999510400191040037104005510400731040091104011710401351040153104175910417771041795104181110418391041857
---
12-1314-1618-1920-2224-26
2830-3233-3536-4042-4546-4850-5456-6264-6770-7376-80
-
6-78-10
11-1314-16
1820-2224-2628-3032-35
38* 40-42* 44-48* 50-54* 56-60* 64-67* 70-73* 75-80* 82-86* 88-92
* 94-102
0.230.340.681.131.923.284.766.468.95
13.2416.3225.9635.8347.6263.5099.79125142181246
116125140162194226254283309355390445505546597645689743787845
12.715.817.520.626.933.336.639.641.449.354
55.56270
79.579.585.6102102108
39.642.95167
76.292
105114127137146171194216241273292311330362
22.424.629.535.842.249.358.5657181
82.595.5111127140159171184197216
9.6512.714.217.522.425.428.731.838.141.444.551
57.266.874.579.58692
98.5108
17.520.623.930.233.338.144.551
58.570.576.279.595.5105114124133146160184
39.642.9516770
82.595.5105119132140162187210235259292311330362
57.257.263.576.289
102114127138151165191216229248279305330356381
12.717.522.425.431.838.144.551
56.562.570
76.282.592
102124133146159178
4652.358.765
77.790.5103116129155171198224248270286298311330356
Closed Spelter Socket G-417
Weighteach(kg)
Dimensions (mm)
See WIRELOCK® warning and application instructions on page 52 of the Crosby Group Inc. general catalogue, April 2006
Forged Steel Sockets through 38 mm, cast alloy steel 40 mm through 100 mm. Spelter socket terminations have an efficiency rating of 100%, based on the cataloguestrength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19, or 6x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC wire rope.
Open Grooved Sockets meet the performance requirements of Federal SpecificationRR-S-550D, Type A, except for those provisions required of the contractor.
NOTICE: All cast steel sockets 40 mm and larger are magnetic particle inspectedand ultrasonic inspected. Proof testing available on special order.
Drawing illustrates one groove used on sockets 6 mm through 19 mm. Sizes 22 mmthrough 38 mm use 2 grooves. Sizes 40 mm and larger use 3 grooves.
Rope dia.
(mm)*
Structuralstrand
dia.(mm)
Stock no.
G-416 galv. A C D F G H J L M N
10396191039637103965510396731039691103971710397351039753103977110397991039815103983310398511039879104163310416511041679104169710417131041731
---
12-1314-1618-1920-2224-26
2830-3233-3536-4042-4546-4850-5456-6264-6770-7376-80
-
6-78-10
11-1314-16
1820-2224-2628-3032-35
38* 40-42* 44-48* 50-54* 56-60* 64-67* 70-73* 75-80* 82-86* 88-92
* 94-102
0.50.591.021.632.644.387.039.7514.121.424.937.25976
114143172197255355
116123141171202235268300335384413464546597648692737784845921
19.120.625.431.838.144.55157
63.5767689
102114127133146159171191
17.520.625.430.235.141.45157
63.5707689
95.5108121127133140152178
9.6512.714.217.520.623.928.731.838.141.444.55157
63.573798692
98.5108
17.520.623.928.731.838.144.551577076
79.595.5102114124133146165184
39.642.947.857
66.582.595.5105121133140162187210235267282302314346
5757
63.57689
102114127140152165191216229248279305330356381
39.644.551
63.57689
102117127152165178229254274279287300318343
33.338.147.857
66.579.595.5105121137146165178197216229241254274318
9.111.212.714.215.720.322.425.428.730.233.339.64654
60.5737679
82.589
Open Spelter Socket G-416
Weighteach(kg)
Dimensions (mm)
*Cast Alloy Steel *Cast Alloy Steel**Diameter of pin must not exceed pin used on companion 416 socket.
See WIRELOCK® warning and application instructions on page 52 of the Crosby Group Inc. general catalogue, April 2006
Terminations Terminations
26 27
S-502stock
number
Ropesize
(mm)*
Weighteach(kg) A B C D E F H
MaxswageDim.(mm)L
1039325103934310393611039389103940510394231039441103946910394871039502103952010395481039566103958410396001042589
68
9-1011-12
131416
18-2022
24-262832
34-3638-40
4448-52
0.150.340.330.640.641.321.292.273.084.726.729.7812.917.323.140.5
109138138176176220220261303344382430473511598702
12.719.619.624.924.931.831.839.443.250.557
64.5717886
100
35.141.141.15151
60.560.5737992
102114127140159184
19.122.422.426.926.931.831.836.642.952.558.56565
71.590.596.5
6.858.6510.412.214
15.517
20.323.926.930.233.836.840.147.253.5
548181
108108135135162189216243270297324378432
12.71717
21.821.828.728.733.338.144.5515757
63.576
82.5
89114114146146184184219257292324365400432508584
11.71818
23.123.129.529.536.139.445.752
58.565
71.577.590.5
Before swage dimensions
Closed Swaged Socket S-502
Forged from special bar quality carbon steel, suitable for cold forming.
Swage Socket terminations have an efficiency rating of 100% based on the catalogue strength of wire rope.
Hardness controlled by spheroidize annealing.
Stamp for identification after swaging without concern for fractures (as per directions in National Swaging Brochure).
Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper "After Swage" dimension.Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter iscreated allowing for a QUIC-CHECK® and permanent visual inspection opportunity.
Designed to quickly determine whether the socket has been through the swaging operation and assistin field inspections, it does not eliminate the need to perform standard production inspections whichinclude gauging for the proper "After Swage" dimensions or proof loading.
U.S. Patent 5,152,630 and foreign equivalents.
NOTE: S-502 Swage Sockets are recommended for use with 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP(EEIP), RRL, FC or IWRC wire rope.
Before using any National Swage fitting with any other type lay, construction or grade of wire rope, it isrecommended that the termination be destructive tested and documented to prove the adequacy ofthe assembly to be manufactured.
In accordance with ANSI B30.9, all slings terminated with swage sockets shall be proof loaded.*
*Maximum Proof Load shall not exceed 50% of XXIP rope catalogue breaking strength.
S-501stock
number
Ropesize
(mm)*
Weighteach(kg)
A B C D E F H M NL
68
9-1011-12
131416
18-2022
24-262832
34-3638-40
4448-52
0.240.510.590.940.942.122.053.625.238.0711.516.119.826.540.366
122159159198198241241294341393440484532581676799
12.719.619.624.924.931.831.839.443.250.557
64.5717886
100
35.141.141.15151
60.560.570
79.593.5103114127140170203
17.520.620.625.425.430.230.235.141.15157
63.563.57089
95.5
6.858.6510.412.214
15.517
20.323.926.930.233.836.840.147.253.5
548181
108108135135162189216243270297324378432
17.520.620.625.425.431.831.838.144.55157
63.563.57689
102
102135135170170207207254295340381419461502584683
9.6511.911.914.214.217.317.319.823.926.930.231
35.142.953.560
38.144.544.55151575770
82.595.5108121133146171203
11.71818
23.123.129.529.536.139.445.752
58.565
71.577.590.5
1039021103904910390671039085103910110391291039147103916510391831039209103922710392451039263103928110393071042767
Open Swaged Socket S-501
S-501 Open Socket Secification
Max. afterswage
Dim (mm)
Forged from special bar quality carbon steel, suitable for cold forming.
Swage Socket terminations have an efficiency rating of 100% based on the catalogue strength ofwire rope.
Hardness controlled by spheroidize annealing.
Stamp for identification after swaging without concern for fractures (as per directions in NationalSwaging Brochure).
Swage sockets incorporate a reduced machined area of the shank which is equivalent to theproper "After Swage" dimension. Before swaging, this provides for an obvious visual difference inthe shank diameter. After swaging, a uniform shank diameter is created allowing for a QUIC-CHECK® and permanent visual inspection opportunity.
Designed to quickly determine whether the socket has been through the swaging operation and assist in field inspections,it does not eliminate the need to perform standard production inspections which include gauging for the proper "AfterSwage" dimensions or proof loading.
U.S. Patent 5,152,630 and foreign equivalents.
NOTE: S-501 Swage Sockets are recommended for use with 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC orIWRC wire rope.
Before using any National Swage fitting with any other type lay, construction or grade of wire rope, it is recommended thatthe termination be destructive tested and documented to prove the adequacy of the assembly to be manufactured.
In accordance with ANSI B30.9, all slings terminated with swage sockets shall be proof loaded.*
*Maximum Proof Load shall not exceed 50% of XXIP rope catalogue breaking strength.
29
Terminations
28
Terminations
Wire rope dia.(mm)
S-421T stocknumber*
Weight each (kg)
S-421TW stocknumber
wedge only
Wedge onlyweight each
(kg)
Optional G-4082bolt, nut & cotter
G-4082 stocknumber
Optional G-4082bolt, nut & cotter
G-4082 weighteach (kg)
9-1011-1314-1618-1920-2224-26
2830-32
10350001035009103501810350271035036103504510350541035063
1.442.794.4
6.589.7513.920.529.4
10355551035564103557310355821035591103560010356091035618
0.230.480.811.181.822.443.564.8
10922271092236109225410922811092307109232510923431092372
0.170.310.520.861.462.443.44.7
Wire rope dia.
(mm)
S-421T stocknumber* A B C D G H J† K† L P R S T U V
10350001035009103501810350271035036103504510350541035063
145175210251286325365415
69.188.1109130149161176222
20.625.431.838.144.55157
66.5
20.625.430.235.141.45157
63.5
35.141.153.862
68.574.784
90.5
77.795.5114134156177194239
198226273314365414466520
47.832
50.561.263
77.265
74.7
22.426.931
35.642.45157
59.5
39.649.357.266.879.595.5108114
11.212.714.216.819.122.425.426.9
54.165
82.692.2109119138156
11.213.517.519.822.426.227.930.2
31.844.551
59.568.573
82.6117
35.147.855.565
74.583.590.5125
9-1011-1314-1618-1920-2224-26
2830-32
S-421T TERMINATOR™ Assembly includes Socket, Wedge, Pin and Wire Rope Clip.† NominalNOTE: For intermediate wire rope sizes, use next larger size socket.
See application warning information on page 48 of the Crosby Group Inc. general catalogue, April 2006
Basket is cast steel.
Wedge socket terminations have an efficiency rating of 80% based onthe catalogue strength of XXIP wire rope.
Crosby products meet or exceed all requirements of ASME B30.26including identification, ductility, design factor, proof load andtemperature requirements. Importantly, Crosby products meet othercritical performance requirements including fatigue life, impactproperties and material traceability, not addressed by ASME B30.26.
Individually magnetic particle inspected.
Pin diameter and jaw opening allows wedge and socket to be used in conjuction with open swage and spelter sockets.
Secures the tail or "dead end" of the wire rope to the wedge, thus eliminates loss or "Punch out" of the wedge.
Eliminates the need for an extra piece of rope, and is easily installed.
The TERMINATOR™ wedge eliminates the potential breaking off of the tail due to fatigue.
The tail, which is secured by the base of the clip and the wedge, is left undeformed and available for reuse.
Incorporates Crosby’s patented QUIC-CHECK® "Go" and "No-Go" feature cast into the wedge. The proper size rope isdetermined when the following criteria are met: 1) The wire rope should pass through the "Go" hole in the wedge. 2) The wire rope should NOT pass through the "No-Go" hole in the wedge.
Utilises standard Crosby Red-U-Bolt® wire rope clip. Standard S-421 wedge socket can be retrofitted with the new style TERMINATOR™ wedge. Available with Bolt, Nut, and Cotter Pin.U.S. patent 5,553,360 and foreign equivalents.
Wedge Socket S-421T TerminatorTM - to EN13411-6:2003
Nominal size S.W.L Rope
Dia. b1 b2 d1 d2 d3 d4 d6 h1 h2
t t mm mm mm mm mm mm mm mm mm mm kg kg
Approximateweight per piece
Form B Form C
11.62.534568
10121620
11.62.534568
1012.51620
10 - 1212 - 1414 - 1816 - 2018 - 2220 - 2422 - 2826 - 3028 - 3432 - 3836 - 4440 - 50
212733384247536066738190
4761758696
107121136150167185206
141720222427303336404550
45556269768594
103112125140156
172125283137404650546270
3545556065758595
110120130140
M16M20M24M27M30M36M39M45M48M52M60M68
506069788494
106115125140159174
105125148165180200220242265296332365
0.50.91.41.82.43.75.07.010131823
0.61.11.82.43.25.06.7
9.0513172431
Open Socket - to DIN 83313Form B Form C
Nominal size S.W.L Rope
Dia. b c d1 d2 e f h i
t t mm mm mm mm mm mm mm mm mm kg
Approxweight
per piece
11.62.534568
10121620
11.62.5
3.1545
6.38
1012.51620
10-1212-1414-1816-2018-2220-2422-2826-3028.3432-3836-4440-50
30374550546067738089
100110
81214161820232629323540
141720222427303336404550
45556269768594
103112125140156
506069788494
106115125140159174
151924263034384245515662
130155182202220245275300330370415460
121519212427303336414650
0.40.71.21.52
3.14.25.88
111520
Closed Socket - to DIN 83313
Terminations
30
Contacts
31
UNITED KINGDOMDoncaster
Carr Hill, DoncasterSouth YorkshireDN4 8DGUnited [email protected]: +44(0) 1302 344010Fax: +44(0) 1302 360006
Aberdeen
Denmore Road Bridge of DonAberdeenAB23 8JWUnited [email protected]: +44(0) 1224 822288Fax: +44(0) 1224 708573
UNITED STATESC280 New Commerce Blvd.Wilkes BarrePA [email protected]: +1 800 521 5555Fax: +1 800 233 8362
GERMANYMagdeburger Strasse 14a D-45881 [email protected]: +49(0) 209 8001 0 Fax: +49(0) 209 8001 275
RUSSIABridon International MoscowIvovaya Street 2/8Building 1, Office 215129329 [email protected]: +7 495 180 80 01
AZERBAIJANMurphy House1083 Salyan HighwayBakuAzerbaijanPhone: +994 12 44 77 020 Fax: +994 12 44 77 021
INDONESIAWisma Anugraha 1st FloorJL Taman Kemang No 32BJakarta [email protected]: +62 218 33 15 66Fax: +62 218 83 29 427
AFRICAEquatorial Guinea
Avenida Parque de AfricaCaracolasMalaboEquatorial GuineaPhone: +240 096 310Fax: +240 096 122
Angola
Sonils BaseLuandaAngolaPhone: +1 713 767 9999Fax: +1 713 767 9420
Kwanda BaseSoyoAngolaPhone: +1 713 767 9250Fax: +1 713 767 9257
MIDDLE EASTPO Box 16931Dubai United Arab [email protected]: +971 488 35 129 Fax: +971 488 35 689
SINGAPORELoyang Offshore Supply Base(SOPS Way)Box No: 5064Loyang CrescentSingapore [email protected]: +65 654 64 611Fax: +65 654 64 622
CHINAUnit B G/F Roxy Industrial Centre 58-66 Tai Lin Pai Road Kwai Chung Northern Territory Hong Kong [email protected]: +852 240 11 166Fax: +852 240 11 232
BRIDONSales OfficesAvailable in six sizes from 13mm to 38mm.
Button Spelter terminations have a 100% efficiency rating, based on the catalogue strength of the wire rope.
Designed for use with mobile cranes. Can be used to terminate high performance, rotation resistantropes, and standard 6 strand ropes.
Easy to install assembly utilises Crosby® WIRELOCK® socketing compound. Refer to the Crosby GroupInc. general catalogue, April 2006 for WIRELOCK® requirements.
Sockets and buttons are re-usable.
Replacement buttons and sockets are available.
Wire rope size SB-427stock
number
Weighteach (kg)
In. mm
105200510520141052023105203210520411052050
13-1616-1919-2322-2628-3235-38
1/2 - 5/85/8 - 3/43/4 - 7/87/8 - 1
1-1/8 - 1-1/41-3/8 - 1-1/2
2.764.677.75
13.2420.8635.38
105210710521161052125105213410521431052152
105230910523181052327105233610523451052354
183217254298351424
67.679.292
111127152
32.538.845.251.664.377
30.235.141.151
57.269.9
3136.642.951
63.579.2
15.719.122.426.228.232.3
38.144.552.361.974.791.9
88.9109121143180205
6.359.659.6515.719.119.1
Button Spelter Sockets SB-427
Socketonly stock
number
Buttononly stock
numberA B C D E F J K L
Dimensions (mm)
For use when pocket type housing has been selected for the crane as opposed to the traditional wirerope wedge socket.
Fully load bearing.
Factory fitted, therefore ensuring the integrity of the rope.
Designed for easy assembly and re-reeving operations.
Rope diameter
1316 - 1819 - 2223 - 26
92108124144
33.039.445.852.0
Bridon Crane Rope End Stop
OD maxOverall length
BA
See WIRELOCK® warning and application instructions on page 52 of the Crosby Group Inc. general catalogue, April 2006