catalogue vignettes an

8/8/2019 Catalogue Vignettes An

1/12

BULK AND SOLIDS HANDLING

SPECIALIST

FRENCH BUILT EQUIPMENTS

Marque dposeChemin du COULET

13720 - BELCODENE

Tl.: 06 15 38 06 07Fax: 04 42 70 64 56

E mail : [email protected]

SALES

CATALOGUE


2/12

**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE -

Tlphone: 06 15 38 06 07- Tlcopie: 04 42 0 64 56- mail: [email protected]

MEASURE AND SECURITY

Used to check either an high, low or intermediate levelinside storage equipment.Used for : powdery product

granular product.

700 LEVEL DETECTOR WITH ROTATIVE PADDLES

This equipment allows a continuous level measure, by

cyclic palpation for granular, pulverulent, light orliquid products, into small and medium size silos.

( until 30 m )

701 SILO PROBE

Equipment made to adapt the level detector with rotativepaddles to different applications or products.

700 21 ACCESSORIES FOR LEVEL DETECTOR

702 PNEUMATIC PROBE

Detects the high level ofpulverulent products, duringtanker lorry load. The low pressure air, can come from a

compressor or a fan. The level is set by adjusting the

flexible length.

Safety equipment used to protect silos and hoppers from

accidental over and under pressures.

Used when loading silos by pneumatic transport.

705 OVERPRESSURE / VACUUM RELIEF VALVES


3/12

SAMPLING / SAMPLER


Tlphone:06 15 38 06 07- Tlcopie: 04 42 70 64 56- mail:[email protected]

Standard sampling block with a self-cleaning revolv-ing trough, and valve of closing to automatic control.This device can be automated and feed buckets, carrou-

sels of cups, cartouches etc...

710 MOTORIZED SAMPLER

Standard sampler with special assembly.

Automatism synchronizing blocking seals pot with the

sampling or the closing of the sampling duct, releasing the

pot. (accidental over pression.)

711 SPECIAL SAMPLER

Screw sampler with manual control by crank.Used either for duct or powder or granular hopper.

Circuit obturation byjaw clutching and using crank.

712 MANUAL SAMPLER

Screw sampler with manual control by crank.

Used for powder or granular duct.

Obturation and reversal of the trough by lever.

713 MANUAL SAMPLER

Used on open chute of non dusty or humid product.

Can operate on request or with programmed sampling

for any station. Servo-system at the pot presence.

714 BUCKET SAMPLER


4/12

The design of the sampler enable to sample one or several

fixed volume. The drawer forms an airlock to avoid the

communication between the material duct and outer.

717 DRAWER SAMPLER



SAMPLING / SAMPLER

7

Screw sampler with crank control used on powder orgranular ducts - the duct is not obdurate.

715 SIMPLE MANUAL SAMPLER

Example of a sampling workshop on 800 t/h coal circuitincluding : The bucket cleaning, belt Lg. 1200 sampling ,

sample crushing, mixture of 4 samples, 1 separation of 1

sample, potting every hour.

716 SAMPLING WORKSHOP


5/12

**MARQUE DEPOSEE** - Chemin du COULET - 13 720 - BELCODENE


BULK LOADING OF TRUCK, WAGON AND BIGBAG

Designed for dustless bulk loading of tank trucks and wag-

ons ; This telescopic spout increase the filled volume andmake air evacuation easier. Make a cleaner environment.

Metal duct for a better abrasion wear resistance.

720 TELESCOPIC METAL TUBE SPOUT

Designed for bulk loading of tank trucks and wagons ;

This telescopic sleeve increase the filled volume, make airevacuation easier. Height small size.

721 RETRACTABLE DUCT SPOUT

Motor-reducer hollow shaft brake make easier all thedevice of cable slack winch, guide and sensor by

pendular mounting with reaction arm.

722 INTEGRATED MOTORIZED WINCH

Compact device allow the conversion of 2 traction cablein only one for the winch. This single cable can be directed

any where or in 1/2 sphere direction. ( left/right , High/down )( the manual winch is not furnished ).

723 DEPORTED OUTER WINCH

Filtering cartridge with their un-plugging systemAllows to integrate de dusting.

This system with a small room occupied makes natural

the dust return.

724 WITH DE DUSTING INTEGRATED

For products with little dust, the natural air evacuation,pushed outside the tank by the product is passing through-

out a cartridge to improve cleanliness.

725 1 CARTRIDGE DE-DUSTING


6/12

This equipment allows the loading for truck and tank.

It is constituted of one standard spout equipped with

a mobile skirt, for dust containment. A de-dusting isessential.

726 MIX LOADING SPOUT

Tank loading spout without de-dusting air circuit.(for small budget or products fine free)

727 LOADING WITHOUT ASPIRATION

Ideal for professional loading,Eitheron truck or tank, without dust. (equipment 2 in 1).A plugging for a de-dusting is envisaged. Very high effi-

ciency of operation.

729 MIX LOADING CHUTE

Our loading experiment allows us to realised all type

of spout, on specifications.

728 SPECIAL SPOUT


Ideal for trucks loading, or heap constitution without dust

emissions. Works shutting away the dust in the chute volume.

A dust collecting increase dustless loading efficiency

specially at the end of cycle.

730 TANKS LOADING CHUTE



For very thin products.

Filter cartridge with automatic unplugging, allows filtered airvolume to escape (equal at the loaded volume.)

No mechanic suction.

731 INTEGRATED DE DUSTING CHUTE


7/12

CHARGEMENT CAMION, WAGON,BIGBAG

The prevention gate of material duct, especially studied, is

placed inside the tank loading hood, in order to decrease theglobal room occupation in height.

732 INCORPORATED GATE, FOR LOADING CHUTE

Realisation of every mobile trolley for loading spout

with their material duct, articulated, extending,fluidized or with fast plugging.

736 TROLLEY FOR MOBILE SPOUT

Associated with a lifting truck, very efficient to realised

bulk bags, from tank loading spout. The bulk bag can beweighedon station with weigh bridge. (As much product thanloading station.)

735 MOBILE BULK BAG FILLING STATION

On this example, associated at a vibrating feeder of 100T/h.

Total assembly is removable by lifting trolley after sectionroller carpet realise. Adjustable height, tare, weighed(possible commercial).

737 MOVING BULK BAG FILLING STATION

Reduced model Hood ref :730. Perfect for low flow rate

(20 to 200 t/h according to granulometry and density).The box without any speed variation, needs a smaller budget.

733 LOADING CHUTE 1000 FOR TRUCKS





8/12

GATE SLIDE GATE

Heavy gravitational slide gate, split the powders flow

on hopper or silo exit. (Granulometry 6 mm ). Allowsto insulate by a safe way the equipment located down-

stream, in order to insure the maintenance.

740 FLAT MANUAL SLIDE GATE

Heavy gravitational slide gate, split the powders flow on

hopper or silo exit. (Granulometry 6 mm ).Controlled by jack ; can be automated.

741 FLAT PNEUMATIC SLIDE GATE

Small size and easy design.Replace advantageously the "ball valve".

2 type : * closing "all or nothing" or * opening / closingplus flow setting. (Several positions ).

742 AIRSLIDE GATE

Heavy gravitational slide gate, split the powders flow onhopper or silo exit. (Granulometry 6 mm ). Controlled byengine ; must be automated.

743 FLAT MOTORIZED SLIDE GATE

Heavy gravitational slide gate, on/off control, or with ad-justable opening, for heavy duty. Recommended for pow-

ders(Granulometry 6 mm ). Tightness realised on thejack hard chrome-plated stem. (No stuffing box)

744 SLIDE GATE ADJUSTABLE BY JACK




9/12

GATESLIDE GATE



Example: Gate Valve - opening : 700 x 1100 mm- Granulometry : 0/300,

- high congestion : 600 mm- Operated by a motor-reducer.

745 SPECIAL VALVE

Heavy gravitational slide gate, with adjustable opening,

for powders(0/6 mm), in heavy duty. Tightnessrealisedon the jack hard chrome-plated stem. (No stuffing box)Controlled by engine : must be automated.

746 MOTORIZED SLIDE GATE


10/12

EXTRACTION / LUMP BREAKING

Bended extractor, with 1000 belt, under multi-product hopper, with layer fitter, belt wiper, pilot,

shielding, inspection door, shock absorbing rolls,

special skirt, enclosure, cable Emergency Stop,

belt drift.

750 BELT EXTRACTOR

Lump breakers extractor with double screw 1000 x

400. The spires of the extractive part, have notches inphase with teeth on the other screw. The clods are crushed,

the product is extract by wished flow rate.

751 LUMP BREAKERS EXTRACTOR

Lump breakers 400 x 400, fluidized bottom for directexit on air slides, or compatible. Protect circuit againstproblems on machine, by clods or crusts. ( Grid remov-able without removing )

752 FLUIDIZED LUMP BREAKERS




11/12

HANDLING / CONVEYOR



Airslide, manufactured turnkey, according to the orderedcircuit and pre-assembled in workshop.

Standard right lengths, bends, de-dusted sections, inlet

and outlet boxes, fans etc.

760 AIRSLIDE CONVEYOR

Standard or special Switch according to workingspecifications.

The Switch represented is used on the top of conveyor, onthe bags fall, with a small length.

761 SWITCH FOR BAG

All sizes strips conveyor, study for special case,standard model with total enclosure for cement or

plaster, standard model for quarry.

762 CONVEYOR

Much better than a shutter, leads the powders, or granular

between 2 (or 3) circuits. Better tightness between the cir-cuit, possibility to armour the mobile chute, inspection

panel, indexing possible, ...

763 2 OUTFLOW WAYS DIVERTER


12/12

CEMENT FACTORY / PLASTER / CONCRETE

For handling and easier elevation until cement oven

nozzle support, weighing until 14 tons in standard.

Steering wheels by pair, hydraulic elevation, towed type

trolley ; or all motorized motion.

770 NOZZLE CARRY TROLLEY



catalogue vignettes an

Documents