catalyst baskets - snap-tite...tel: +82 2 559 0400 [email protected] kz – kazakhstan, almaty...
TRANSCRIPT
-
Parker Autoclave Engineers has two catalyst baskets available for their Mini-Reactors, the GLS and GGS.
The spinning Dispersimax™ catalyst basket impeller is designed for gas/liquid/solid (GLS) phases where the catalyst cannot be suspended or the researcher wants the catalyst in a basket. If the process is gas/gas/solid (GGS) work, then use the GGS basket impeller attached to a solid shaft with no Dispersimax™ features.
The Dispersimax™-GLS spinning catalyst basket impeller, apart from being a catalyst basket, works exactly as a standard Dispersimax™, allowing gas to be drawn down the hollow shaft and to promote a positive flow through the hole in the impeller for dispersion. This will allow the catalyst contained to have a positive flow of gas over it, or entrained. It also offers the effect of re-circulating the gas again down the shaft. This spinning basket developed for the Mini-reactor, has a mesh size as small as 8 micron and a volume between 1-1.5 ml. However, Parker Autoclave Engineers can custom design this to make it available for any reactor that uses a Dispersimax ™ impeller. This feature allows the researcher to screw a new basket into the MagneDrive® shaft to replace the existing impeller, very easy and attractive option for any research where a catalyst cannot be suspended or is too fine.
The Gas/Gas/Solid (GGS) spinning catalyst basket impeller is designed only for single phase applications or gases, is to be used with a solid shaft, and screws directly onto the MagneDrive® shank. The profile of the basket has a small annulus or space between the mesh of 1-2 mm from either 8 micron up to 20 micron or larger mesh sizes. The cover has holes which allow the gases to be drawn into the basket area and force a positive flow over the catalyst area suspended within the annulus. This effective motion realizes activation of the gases by the catalyst and any gas is re-drawn and entrained due to the flow path and features of the basket impeller.
Parker Autoclave Engineers has been at the forefront of development of reactors and products to support the development of new catalyst and processes through tried and tested systems, catalyst baskets and other associated equipment and approaches to support the researcher’s needs.
For more information, please contact Parker Autoclave Engineers on the web at www.AutoclaveEngineers.com or by phone at 814 860-5700.
Catalyst BasketsGas/Liquid/Solid (GLS)Gas/Gas/Solid (GGS)
Gas/Liquid/Solid (GLS)
Gas/Gas/Solid (GGS)
-
Parker Worldwide
AE – UAE, DubaiTel: +971 4 [email protected]
AR – Argentina, Buenos AiresTel: +54 3327 44 [email protected]
AT – Austria, Wiener NeustadtTel: +43 (0)2622 [email protected]
AT – Eastern Europe, Wiener NeustadtTel: +43 (0)2622 23501 [email protected]
AU – Australia, DandenongTel: +61 (0)3 9768 [email protected]
AZ – Azerbaijan, BakuTel: +994 50 2233 [email protected]
BE/LX – Belgium, NivellesTel: +32 (0)67 280 [email protected]
BR – Brazil, Sao Jose dos CamposTel: +55 12 4009 [email protected]
BY – Belarus, MinskTel: +375 17 209 [email protected]
CA – Canada, Grimsby, Ontario Tel +1 [email protected]
CH – Switzerland, EtoyTel: +41 (0) 21 821 02 [email protected]
CL – Chile, SantiagoTel: +56 (0) 2 2303 [email protected]
CN – China, ShanghaiTel: +86 21 2899 [email protected]
CZ – Czech Republic, KlecanyTel: +420 284 083 [email protected]
DE – Germany, KaarstTel: +49 (0)2131 4016 [email protected]
DK – Denmark, BallerupTel: +45 43 56 04 [email protected]
ES – Spain, MadridTel: +34 902 33 00 [email protected]
FI – Finland, VantaaTel: +358 (0)20 753 [email protected]
FR – France, Contamine s/ArveTel: +33 (0)4 50 25 80 [email protected]
GR – Greece, AthensTel: +30 210 933 [email protected]
HU – Hungary, BudapestTel: +36 1 220 [email protected]
ID – Indonesia, TangerangTel: +62 (0)21 7588 [email protected]
IE – Ireland, DublinTel: +353 (0)1 466 [email protected]
IN – India, MumbaiTel: +91 22 6513 7081-85
IT – Italy, Corsico (Ml)Tel: +39 02 45 19 [email protected]
JP – Japan, TokyoTel: +(81) 3 6408 [email protected]
KR – South Korea, SeoulTel: +82 2 559 [email protected]
KZ – Kazakhstan, AlmatyTel: +7 7272 505 [email protected]
LV – Latvia, RigaTel: +371 6 745 [email protected]
MX – Mexico, TolucaTel: +52 722 275 [email protected]
MY – Malaysia, SelangorTel: +603 784 90 [email protected]
NL – The Netherlands, OldenzaalTel: +31 (0)541 585 [email protected]
NO – Norway, StavangerTel: +47 (0)51 826 [email protected]
NZ – New Zealand, Mt WellingtonTel: +64 9 574 1744
PL – Poland, WarsawTel: +48 (0)22 573 24 [email protected]
PT – Portugal, Leca da PalmeiraTel: +351 22 999 [email protected]
RO – Romania, BucharestTel: +40 21 252 [email protected]
RU – Russia, MoscowTel: +7 495 [email protected]
SE – Sweden, SpångaTel: +46 (0)8 59 79 50 [email protected]
SG – Singapore,Tel: +65 6887 [email protected]
SK – Slovakia, Banská BystricaTel: +421 484 162 [email protected]
SL – Slovenia, Novo MestoTel: +386 7 337 [email protected]
TH – Thailand, BangkokTel: +66 2 186 [email protected]
TR – Turkey, IstanbulTel: +90 216 [email protected]
06-1189BE May2014© 2014 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation
WARNINGFAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection
of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Offer of SaleThe items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be
governed by the provisions stated in Parker's standard terms and conditions of sale (copy available upon request).
ISO-9001 Certified
Caution! Do not mix or interchange parts or tubing with those of other manufacturers. Doing so is unsafe and will void warranty. Caution! Parker Autoclave Engineers Valves, Fittings and Tools are not designed to work with common commercial instrument tubing and will only work with tubing built to Parker Autoclave Engineers AES Specifications. Failure to do so will void warranty.
Instrumentation Products DivisionAutoclave Engineers Operation8325 Hessinger DriveErie, PA 16509-4679Tel: 814 860 5700Fax: 814 860 5811www.AutoclaveEngineers.com
Parker Hannifin Manufacturing Ltd.Instrumentation Products Division, EuropeIndustrial Estate WhitemillWexford, Republic of IrelandTel: 353 53 914 1566Fax: 353 53 914 1582
Instrumentation Products DivisionAutoclave Engineers Operation, Houston15340 Vantage Parkway, EastHouston, TX 77032Tel: 281 987 3828Fax: 281 987 2318
Parker Hannifin Manufacturing Ltd.Instrumentation Products Division, EuropeRiverside Road, Pottington Business ParkBarnstaple, UK, EX31 1NP, UKTel: 44 1271 313131Fax: 44 1271 373636
TW – Taiwan, TaipeiTel: +886 2 2298 [email protected]
UA – Ukraine, KievTel: +380 44 494 [email protected]
UK – United Kingdom, WarwickTel: +44 (0)1926 [email protected]
USA – IPD, HuntsvilleTel: +1 256 881 [email protected]
USA – Autoclave Engineers, ErieTel: +1 814 860 [email protected]
VN – Vietnam, Hochi Minh City Tel: +84 (0)8337 546 [email protected]
ZA – South Africa, Kempton ParkTel: +27 (0)11 961 [email protected]