cce-fu workshop on the european fusion roadmap for fp8 and beyond ipp garching, 13-14 april 2011
DESCRIPTION
CCE-FU Workshop on the European fusion roadmap for FP8 and beyond IPP Garching, 13-14 April 2011. Association EURATOM-ÖAW. Association EURATOM-ÖAW: Research Unit. CCE-FU Workshop on the European fusion roadmap for FP8 and beyond IPP Garching, 13-14 April 2011. Association EURATOM-ÖAW. - PowerPoint PPT PresentationTRANSCRIPT
CCE-FU Workshop on the European fusion roadmapfor FP8 and beyond
IPP Garching, 13-14 April 2011
Association EURATOM-ÖAW: Research Unit
Association EURATOM-ÖAW
CCE-FU Workshop on the European fusion roadmapfor FP8 and beyond
IPP Garching, 13-14 April 2011
Association EURATOM-ÖAW: Research Unit
Association EURATOM-ÖAW
CCE-FU Workshop on the European fusion roadmapfor FP8 and beyond
IPP Garching, 13-14 April 2011
Association EURATOM-ÖAW: Major co-operations
IPP Garching – ASDEX Upgrade
IPP Garching – Greifswald
CCFE (Culham) - JET
KIT (Karlsruhe)
Major co-operations on plasma theory:
FZ Jülich
Slovenian Fusion Association (MHEST)
Danish Fusion Association (Risø)
Association EURATOM-ÖAW
CCE-FU Workshop on the European fusion roadmapfor FP8 and beyond
IPP Garching, 13-14 April 2011
Integrated Tokamak Modelling: University of Innsbruck, TU Wien
Plasma-Wall Interaction: Vienna University of Technology (TU Wien)
University of Innsbruck
EFDA Topical Groups (Diagnostics, MHD, HCD, Transport):
University of Innsbruck, Graz University of Technology (TU Graz)
Structural materials (tungsten alloys):
Erich-Schmid Institut of Materials Science at ÖAW
Characterization of high-temperature superconductors:
Vienna University of Technology / Atominstitut
Development of the EFDA TIMES model for energy scenario modelling:
Research Studios Salzburg
Stellerator modelling: Graz University of Technology (TU Graz)
Nuclear Data: Vienna University of Technology (TU Wien)
Association EURATOM-ÖAW: Research Programme in 2011
Association EURATOM-ÖAW
CCE-FU Workshop on the European fusion roadmapfor FP8 and beyond
IPP Garching, 13-14 April 2011
Predictive Modelling for ITER: Roadmap Objective 2
Power flux to the outer divertor plate during a Type-I ELM from simulation with BIT 1 and infrared thermography (JET shot #74380; S. Kuhn, D. Tskhakaya et al.)
Relevant expertise: A. Kendl, S. Kuhn / D. Tskhakaya, M. Probst, K. Schöpf, P. Scheier, (Univ. Innsbruck), F. Aumayr, F. Köchl (TU Wien)
Radial (left) and poloidal (right) cross-correlation of density fluctuations for several imposed ExB flow shear strengths with fixed flow speed: stronger shear enhances correlations (A. Kendl et al., Univ. Innsbruck, using the code ATTEMPT from FZ Jülich)
Association EURATOM-ÖAW
CCE-FU Workshop on the European fusion roadmapfor FP8 and beyond
IPP Garching, 13-14 April 2011
Plasma-Wall Interaction: Roadmap Objective 2
Comparison of steady-state sputtering yields for impact of N2
+ ions on soft a-C:H with previous data for hard a-C:H and the results of TRIM.SP calculations (only kinetic sputtering contributions) F. Aumayr et al., TU Wien)
Relevant expertise : F. Aumayr (TU Wien) M. Probst, P. Scheier, R. Schrittwieser, D. Tskhakaya (Univ. Innsbruck)
0.1
1.0
100 1000
Jacob et al. 2005
TRIM.SP
this work1
10
spu
tter
ing
yie
ld (
ero
ded
C p
er i
on
)
N2
+ ion energy (eV)
N2
+ (a-C:H)
tota
l m
ass
rem
ova
l (a
mu
per
io
n)
-2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.00
1
2
3
4
5
6
7
8
9
10
Ere
l(eV
)
Distance to surface of H-atoms (10-10m)
Be in middle of ring Be between two C atoms Be half centered Be on top of a C atom
Graphite + beryllium atom
Modelling of material mixing: energy profile as a function of the Be-surface distance (M. Probst et al., Univ. Innsbruck)
Association EURATOM-ÖAW
CCE-FU Workshop on the European fusion roadmapfor FP8 and beyond
IPP Garching, 13-14 April 2011
Predictive Modelling and Stellarator Physics: Roadmap Objectives 2 and 4
Relevant expertise: W. Kernbichler (TU Graz)
• Numerical evaluation of neoclassical toroidal viscosity due to non-resonant magnetic perturbations, using the drift kinetic equation solver NEO-2
• NEO-2 is now capable now of modelling electron cyclotron current drive (ECCD) ´ efficiency in tokamaks fast and with reasonable CPU times
• NEO-2 is also suitable for stellerator modelling (higher dimensionality) with reasonable CPU times. Therefore NEO will also be used for the computation of
• ECCD in W7-X in co-operation with IPP Greifswald.
Association EURATOM-ÖAW
CCE-FU Workshop on the European fusion roadmapfor FP8 and beyond
IPP Garching, 13-14 April 2011
Plasma Stability – Plasma Turbulence and Transport: Roadmap Objective 2
Relevant expertise: A. Kendl, R. Schrittwieser (Univ. Innsbruck), F. Aumayr (TU Wien)
Density morphology in a simulation using the code GEMR, including profiles and turbulence in a single dependent variable (left) in quiescent phases and (centre) during a burst. Right: An ELM crash scenario as an extreme form of burst phenomenon, driven by a long-wave MHD instability which then saturates on self-generated micro-turbulence (A. Kendl et al., Univ. Innsbruck).
Investigation of plasma turbulence: visualization of a palm tree mode (PTM) filament on a q=3 surface. (R. Schrittwieser et al., Univ. Innsbruck)
Association EURATOM-ÖAW
High-Temperature Superconductors: Roadmap Objective 4
Relevant expertise: H.W. Weber, M. Eisterer et al. (TU Wien / ATI)
CCE-FU Workshop on the European fusion roadmapfor FP8 and beyond
IPP Garching, 13-14 April 2011
Magnetoscan of a prototype Roebel cable. The green circle highlights a defect (H.W. Weber, M. Eisterer et al., TU Wien/ATI)
High temperature superconductors for future fusion magnets: high amperage conductors (e.g. Roebel cables), homogeneity of current flow, neutron irradiation effects
Association EURATOM-ÖAW
Relevant expertise: R. Pippan et al. (ÖAW-ESI) Characterization of tungsten alloys - use of miniaturized material
samples
(a) Focused-ion-beam (FIB) image of a notched tensile specimen
(b) Schematic view of the expected dislocation structure of a notched tensile specimen and a notched cantilever (R. Pippan et al., ÖAW-ESI)
CCE-FU Workshop on the European fusion roadmapfor FP8 and beyond
IPP Garching, 13-14 April 2011
Structural and divertor materials: Roadmap Objective 4
Association EURATOM-ÖAW
CCE-FU Workshop on the European fusion roadmapfor FP8 and beyond
IPP Garching, 13-14 April 2011
Education and Specific Training: Roadmap Objective 3
Association EURATOM-ÖAW
PhD students trained on fusion-related topics:
App. 17 persons per year:
Plasma theory and scenario modelling (Univ. Innsbruck, TU Graz): 4 Plasma-wall interaction (Univ. Innsbruck, TU Wien): 6
Plasma diagnostics, fast particles, plasma stability (Univ. Innsbruck, TU Wien): 4
Materials science and engineering (ÖAW-ESI, TU Wien): 3
Association EURATOM-ÖAW: Contacts
Head of Research Unit (HRU): Univ.Prof. Dr. Harald W. Weber (Atominstitut, TU Wien)Deputy HRU: Univ.Prof. Dr. Friedrich Aumayr (Institut für Angewandte Physik, TU Wien) Dr. Reinhard Maix (Atominstitut, TU Wien)
ÖAW –EURATOM Koordinationsbüro Kegelgasse 27/13, 1030 Wien Tel.: +43-1-51581-2676, Fax: +43-1-51581-2677 http://www.oeaw.ac.at/euratom
Mag. Monika Fischer ([email protected]) Mag. Anna Kantner ([email protected])
CCE-FU Workshop on the European fusion roadmap for FP8 and beyond
IPP Garching, 13-14 April 2011