cdma bsc hardware description zte make
TRANSCRIPT
![Page 1: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/1.jpg)
CDMA BSS Hardware Description (ZTE Make)
![Page 2: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/2.jpg)
Mechanical Features of BSC BSC has two kinds of rack:the central rack and the vocoder rack.
Central rack and vocoder rack apply standard rack and insertion boxes.
The different types of insertion box are composed of different inserted
boards.
From top to bottom, each rack contains: a power distribution insertion
box, 3~5 function insertion boxes, a fan box and dust-proof shelf.
There are four kinds of function insertion boxes:
HIRS box: consists of PSMB, NIM, NCM.
CDSU box: consists of PSMB, CDSU, CPM, TCM, GPSIM, etc.
SVBS box: consists of PSMB, SVM, SVICM.
PCFS box:consists of PSMB,PCFIM,PCF.
Max. number of broads in each function insertion box:22
![Page 3: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/3.jpg)
Max.number of E1 links between BSC and MSC: 240 Max.number of BTS can be connected with:380 Max. number of selector/vocoder :7200 Max. traffic processing capability:5040 Erl ( 7200 x 0.7) Support soft handoff between BSC 8K、 13K QCELP and 8k EVRC vocoder Support packet data service,with a data rate up to 153.6kbps
Performance of BSC
![Page 4: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/4.jpg)
HIRS:High-speed Interconnection Routing Subsystem
SVBS:Selector Vocoder Bank Subsystem
PCFS:Packet Control Function Subsystem
CPS:Call Processing Subsystem
CDSUS:Channel Data Service Unit Subsystem
TS:Timing Subsystem
II. Subsystems of BSC
![Page 5: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/5.jpg)
Traffic & Signaling between each subsystem by B-HIRS
B-HIRSBSM
PCFS
CPSCDSUSBTS
SVBS
TS
MSC
PDSNA10/A11
A1/A2
Abis
voice
packet data
O&M
![Page 6: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/6.jpg)
HIRS Subsystem is switching center and packet data exchange platform of BSC.
Functions of HIRS: Packet data switching
Timing distribution, monitor GPS
Software downloading
Operation and maintenance management on the whole BSS
HIRS
![Page 7: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/7.jpg)
HIRS Shelf Structure
PSMB
NIM
NIM
NIM
NIM
NIM
NIM
NIM
NIM
NIM
NCM
NCM
NIM
NIM
NIM
NIM
NIM
NIM
NIM
NIM
NIM
PSMB
NCM: Network Control Module
NIM: Network Interface Module
PSMB : Power Supply Module
![Page 8: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/8.jpg)
NCM is the core module in HIRS shelf
When NCM is in slot 11,it must connect with port 6 of NIM in slot 9 via the internal serial bus on backplane.
When NCM is in slot 12,it must connect with port 6 of NIM in slot 14 via the internal serial bus on backplane.
2 NCM working mode: active and standby
NCM
![Page 9: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/9.jpg)
Major functions of NCM : Gateway function:data receiving of CO bus and distribution of DIS bus,routing of data frame inside/outside of the local shelf
Distribution of software of respective modules and configuration information;
Fault detection, isolation, report and recovery in HIRS network;
GPS clock distribution;
Serving as the foreground PC of BSM to communicate with the background through 10/100Mbps Ethernet
NCM Functions
![Page 10: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/10.jpg)
Receive/send RS-422 serial data
Receive/send data through DISCO
8+ 1 redundancy
Clock receiving and distributing
Reports module working status to NCM via I2C bus and accepts NCM control
NIM Functions
![Page 11: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/11.jpg)
SVBS FunctionsSVBS is the core part for enabling voice services and supporting SS7 signaling MTP1 and MTP2.
Judge and implement soft handoff: select a path in several soft handoff path by the quality for code type conversion
Code type conversion function: It enables the conversion between 64K PCM codes and variable rate of QCELP codes;
Enables echo cancellation for PCM data on the forward link
Power control
Signaling handle
![Page 12: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/12.jpg)
SVBS Shelf Structure
PSMB
SVM
SVM
SVM
SVM
SVM
SVM
SVM
SVM
SVICM
SVICM
SVM
SVM
SVM
SVM
SVM
SVM
SVM
SVM
PSMB
SVICM: Selector Vocoder Interface Control Module
SVM: Selector Vocoder Module
PSMB : Power Supply Module
![Page 13: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/13.jpg)
Input and Output interface
4*E1 interfaces connected with MSC
SVBS Subsystem
Connected with NIM via RS422 port
![Page 14: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/14.jpg)
SVICM FunctionsS-HIRS:Communicate with HIRS Network
Distribute forward traffic and signaling( SVMSVICM NIM)Distribute reverse traffic and signaling (SVMSVICM NIM)Distribute signaling interior SVBS( SVMSVICM )
Receive and Distribute Clock and TOD messageManage and control SVMSignaling handlingCode type conversion between MSC and BSS via DTI
![Page 15: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/15.jpg)
NIM
SVICM
Ugateway
SVCSVM1 SVM
7SVM8
CODISC_BUS
SVBS
DTI
MSC
时钟
I2C
Clockdistribution
RS422
4*E1
4*HW
Structure of SVICM
![Page 16: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/16.jpg)
transcoding between PCM and QCELP
reverse outer-loop power control
soft handoff
handle layer 3 of Abis interface and layer 2 of IS-95 signaling
assign the timeslot
SVM - Selector & Vocoder Module
![Page 17: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/17.jpg)
A SVM contain 1 SVP and 15 SVEs. SVICM receive traffic data from the RS-422 port of NIM then forward to
SVM,SVP forward to SVE,SVE transcoding to PCM and send through
HW,in other direction,SVE transcoding PCM to QCELP or EVRC,then
send to SVP,then to SVICM,and then NIM.
Structure of SVM
HW interface
SVE1
SVE2
SVE15
Data Interface
maintenance bus
clock interface
SV
P
![Page 18: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/18.jpg)
PCFS
Each BSC can support 10 PCFS subsystems.
Each PCFS subsystem comprises 1 PCFIM board and 8 PCF boards.
Each PCFS subsystem is connected with the PDSN via PCFIM board, and
provides a 10M/100M self-adaptive physical Ethernet interface through the
PCFIM board.
Each PCFS subsystem can carry 4000 PPP connections (Dormant+Active),
and 240 activated PPP connections (total number of active ones).
![Page 19: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/19.jpg)
PCFS Functions
To Select a service path with best quality among multiple soft handoff paths for
data GRE encapsulation.
Enables adaptation between GRE data packets and RLP data packets;.
To establish, configure and maintain A8 and A10 links via A9 and A11 interfaces.
To establish PPP link between MS and PDSN to enable packet data service
transmission.
![Page 20: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/20.jpg)
Input and Output Interface
PCFS provides a 10M/100M fast Ethernet interface to be connected with
PDSN.
PCFS provides a RS422-port to be connected with HIRS switching
network.
![Page 21: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/21.jpg)
CPS is a joint point of BSS system’s resource management and call signaling protocol processing.
CPS comprises two modules:CPM and PAM.
CPS
![Page 22: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/22.jpg)
Handle the signaling of Abis interface
Radio resource maintenance,management and distribution
Trunk resource management
provides A signaling interface. It fulfills A interface startup and re-startup, A interface protective switching, activation of failing data link, control of link labels, and delivery of A messages.
Control over loading of BSS;produce the message of A and ABIS interface:establish the signaling link to CCM and SVICM
Manage the database of BSS,include the parameters of BSS system,ground circuit resource,traffic channel resource,calling record,performances record,handoff record and so on.
CPS Functions
![Page 23: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/23.jpg)
Hardware feature of CPMAccording to the software function of CPM,CPM should have the Hardware features below:CPS sub-system is a joint point of BSS system’s resource management and call signaling protocol processing,processing all the signaling,so the CPM should be powerful.
The CPM is 1+1 hot standby
![Page 24: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/24.jpg)
PAM Functions
monitor the running status of the power supply modules in the BSC-side frames and the equipment room environment signals, including temperature, humidity, smoke, and so on.
report the result to the background operation and maintenance console through the NCM for processing;
provides duplex RS232 and RS485 interfaces for the connection of external monitoring devices and alarm box.
![Page 25: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/25.jpg)
CDSU Subsystem
1. Convert signal between RS-422 interface and non-channelized E1,transfer signaling and traffic data between BSC and BTS.
2. BSC-CDSU and BTS-CDSU, have the same hardware structure
![Page 26: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/26.jpg)
Timing SubsystemAccording to the CDMA standard,BSC and BTS independently synchronization the timing signal provided by GPS.
Timing subsystem provides such timing signal:* PP2S* 16chips: 19.6608MHz* TOD message
![Page 27: CDMA BSC Hardware Description ZTE Make](https://reader031.vdocument.in/reader031/viewer/2022020711/5515216a4979590c1e8b4b58/html5/thumbnails/27.jpg)
GPSTM
HIRS1
NCM
NCM
HIRS2
NCM
NCM
SVICM
SVICM
19. 6608MHz,10MHz, PP2S,
Tod
19. 6608MHz,10MHz, PP2S,
Tod
1. 2288MHz,PP2S, Tod
1. 2288MHz,PP2S, Tod
1. 2288MHz, PP2S, Tod, Tx_cl ock,
Rx_cl ock
1. 2288MHz, PP2S,8kHz, 2MHz, 50Hz,
Tod
NIM
NIM SVM
SVM
1. 2288MHz, PP2S, Tod, Tx_cl ock,
Rx_cl ock
1. 2288MHz, PP2S,8kHz, 2MHz, 50Hz,
Tod
BSC_CDSU
CPM
GPSTM
GPSTMBP
TCM
Timing distributing of BSC