ce marking and en testing - when will it become mandatory for fire protection products?

FIA Risk Assessor CPD Training Day

Pioneering fire protection through innovation and professionalism

CE Marking & EN Testing

When will it become mandatory for fire protection products

Niall Rowan, Technical Officer

Association for Specialist Fire Protection (ASFP)

Promat Fire Safety Day – 2014



Contents

• Who is the ASFP?

• Construction Products Regulation

• European Technical Specifications

• hENs and EADs

• Role of third party bodies (AVCP)

• Timescale

• What you need to do

• ASFP Short Guide to CPR

• Summary





ASFP Short Guide to the CPR

• 6 pages

• General intro/info

• Need to know information

• Product specific

• Regularly updated

• Free of charge

• http://is.gd/F4pmhu

http://is.gd/F4pmhu

http://is.gd/F4pmhu

http://is.gd/F4pmhu



When

Originally known as the Association of Structural Fire Protection Contractors and Manufacturers (ASFPCM), the association was formed in 1975


Who is the Association for Specialist Fire Protection?



Why

In recognition of a need to bring together passive fire protection (PFP) manufacturers, contractors and testing/certification bodies to encourage, develop and give guidance on essential standards in PFP.




To better reflect the diversity of the work then being undertaken in the fields of fire stopping, fire resisting ducting, fire dampers, fire resisting partitions and other elements used for compartmentation

1996 → Association Specialist Fire Protection




RED BOOK

Fire stopping & penetration seals for the construction industry 3rd Edition

The Association for Specialist fire protection

Fire & smoke resisting dampers

GREY BOOK


Fire retardant coatings for The construction industry

ORANGE BOOK


Fire resisting non load-bearingpartitions

PURPLE BOOK


YELLOW BOOK

Fire protection for structural steel in buildings

5th Edition The Association for Specialist fire protection

BLUE BOOK

Fire resisting ductwork 2nd Edition





Compiled by:

• Manufacturers,

• Contractors

• Testing and Certification bodies

• Other associate members

Technical Guidance Documents




ASFP Advisory Notes

• ‘Indicative’ or ‘Ad-hoc’ Testing • Understanding the term ‘Competent Person’ • Awareness Guidance for the Responsible Person • Using Polyurethane Foams




ASFP Guide to Passive Fire Protection for Fire Risk Assessors




ASFP Guide - Ensuring Best Practice in passive fire protection in buildings

• RRO(FS)O (& national equivalents)

• Regulation 38

• More emphasis on installer certification

• Rely more on PFP in engineered buildings

• MMC & BIM

• Free download from ASFP website

• Printed versions from ASFP @ £20




• Free movement of goods across EU Countries

• Need for a “common technical language”

• Each Member States still responsible for own Building regulations

• Timescale depends on timing of European Technical Specifications

Construction Products Regulation




• European product standards (hEN) – prepared in CEN

• European Technical Assessments – (ETAs) – prepared by an Approval Body against a European Assessment Document (EAD) (only where no hEN exists)

“Common language for construction products” – 1




European product standards (hEN)

• Acknowledged by the European Commission as being one used in the CE marking process

• is termed a ‘harmonised’ EN (hEN)

• Is given this status by announcement in the EU Official Journal (OJEU)

• A list of all harmonised ENs under the CPD can be found on the EU website http://is.gd/pNIr6x


http://is.gd/pNIr6x



Examples:

• EN 12101-7 Smoke control duct sections

• EN 12101-8 Smoke control dampers

• EN 13162 Thermal insulation products – mineral wool

• EN 13964 Suspended ceilings

• EN 14041 Resilient, textile & laminate floor coverings

• EN 15650 Fire Dampers

• EN 14509 Self supporting double skin metal faced insulating panels

• EN 16034 Pedestrian doorsets




• European product standards (hEN) – prepared in CEN

• European Technical Assessments – (ETAs) – prepared by an Approval Body against a European Assessment Document (EAD)

• Only where no hEN exists

‘Common language for construction products’ – 2




• An EAD (European Assessment Document) is a document drafted by and for the European Organisation for Technical Approvals (EOTA) Approval Bodies as a result of a mandate from the European Commission and EFTA

Common language for construction products – 2

http://www.eota.be/

http://www.eota.eu/en-GB/content/etags-used-as-ead/26/


http://www.eota.be/












Examples:

• ETAG 003 Internal Partition Kits

• ETAG 018 Fire protective products

– Part 2: Reactive coatings for structural steelwork

– Part 3: Renderings and rendering coatings

– Part 4: Fire protective board, slab and mat

• ETAG 026 Fire stopping and sealing products

– Part 2: Penetration seals

– Part 3: Linear joint seals

– Part 4: Air transfer grilles

– Part 5: Cavity barriers




1. European product standards (hEN) – door

2. European Assessment Document – (EAD/ETAG) – partition

‘Common language for construction products’




• Performance requirements for the product in support of the relevant Basic Works Requirements of the CPR: – Mechanical resistance and stability

– Safety in case of fire

– Hygiene, health and environment

– Safety in use

– Protection against noise

– Energy economy and heat retention

– Environmental Product Declarations

– Sustainable use of natural resources (new)

What’s in hENs and EADs?




Role of third party bodies (AVCP)

• Assessment & Verification of Constancy of Performance (AVCP)

• The level of AVCP depends upon the essential requirements, the product and its end use

• There are five systems of AVCP:

– System 1 – All controlled by Notified Certification Body or Technical Approval Body

– System 3 – Used for less critical products than system 1

– System 4 – Used for less critical products than system 3




Manufacturer

Factory

Production

Control

Notified Body (Certification Body)

Initial Type Testing (may subcontract)

Initial inspection of factory & FPC

Continuous surveillance

System 1


Allocation of Tasks



Manufacturer

FPC

ITT

Notified Body (test laboratory)

ITT

Nothing

System 3

System 4




What level is Attestation of Conformity set at for each product?


• Fire resistance -

mainly System 1

• Reaction to fire -

either System 1,

3 or 4, decided

by…



Attestation of Reaction to Fire performance

R to F class AVCP

A1*, A2*, B*, C* 1

A1, A2, B, C, D, E 3

A1(CWFT), F 4

*products/ materials for which a clearly identifiable stage in

the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material)




• CPR is directly applicable in all Member States

• CPR came into force June 2013 • CE marking mandatory if product is covered

by a hEN • CE marking still voluntary if product covered

by an EAD • So….

Timescale - 1




Timescale - 2

The date at which CE marking becomes mandatory is determine by the product standard and principally the date that the product standard is published either as an EAD or as a hEN





ASFP Short Guide to the CPR

• 6 pages

• General intro/info

• Need to know information

• Product specific

• Regularly updated

• Free of charge

• http://is.gd/F4pmhu

http://is.gd/F4pmhu

http://is.gd/F4pmhu

http://is.gd/F4pmhu



Timescale - 2





What you need to do – 1

• Determine if your product is covered by a harmonised product standard (hEN) or an European Assessment Document (EAD)

• Determine the status of the hEN or ETAG. Is it published or still in development? Many are still being drafted

• Determine how many of your products can be grouped together into families

• Approach a Notified Body (for products covered by a hEN) or an Technical Approval Body (TAB) for products covered by an ETAG/EAD)





• If the products is AVCP system 3 then: – Organise the testing with a Notified Body (test lab)

– Make a Declaration of Performance

– CE mark your product accordingly

• If the products is AVCP system 1 then: – Notified Certification Body (for hEN products) or a

Technical Approval Body (TAB for EAD products) will organise the testing and issue a Certificate of Conformity.

– Make a Declaration of Performance

– CE mark your product accordingly.





A most important step is:

• Choose a good Notified Test/Certification Body or Technical Approval Body (TAB).

• For Notified test laboratories, look for those who are members of EGOLF (European organisation for fire testing, inspection and certification)

• For Notified certification bodies and Notified test laboratories, ask if they regularly participate in the Group of Notified Bodies Fire Sector Group (they should).




Final points

• There is a lot of misinformation about CE marking

• Some stakeholders claim CE marking is mandatory, when it is not yet so for many products

• Some stakeholders will claim that it is not mandatory, when it is

• Some manufacturers will voluntarily CE mark their products to get an advantage in the market. If enough do so then it may become de facto mandatory

• It will take some years before it becomes the norm throughout the construction industry

• The ASFP will always be around for guidance!



The Malt House Grand Canal Quay Dublin 2

ASFP Office Tel: +353 (0) 1 6791324

Website: http://www.asfpireland.ie/

Kingsley House, Ganders Business Park,

Kingsley, Bordon, Hampshire GU35 9LU

ASFP Office Tel: +44 (0)1420 471612

ASFP Office Fax: +44 (0)1420 471611

Website: www.asfp.org.uk

Niall Rowan - Technical Officer

Association for Specialist Fire Protection

[email protected]

This PowerPoint presentation is the copyright of the Association for Specialist Fire Protection


http://www.asfpireland.ie/

http://www.asfp.org.uk/

mailto:[email protected]

ce marking and en testing - when will it become mandatory for fire protection products?

Real Estate