DEKRA Certification B.V.

j <B.T.M. Holtus H.R.M. BarendsManaging Director Certification Manager

© Integral publication of this certificate is allowed

ACCREDITED BY THEDUTCH ACCREDITATIONCOUNCIL

DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-product-safety.com Company registration 09085396

CERTIFICATE

Issued to:Applicant:eldoLED B.V.Science Park Eindhoven 51255692 ED Son En Breugel, The Netherlands

Licensee:eldoLED B.V.Science Park Eindhoven 51255692 ED Son En Breugel, The Netherlands

Product : Intelligent LED driver/controllerTrade name(s) : eldoLEDType(s)/model(s) : LINEARdrive 210D, LINEARdrive 211D, LINEARdrive 212D, LINEARdrive 220D

and LINEARdrive 222D

The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.

DEKRA hereby declares that the above-mentioned product has been certified on the basis of:- a type test according to the standard EN 61347-1:2015, EN 61347-2-13:2014,

EN 61347-2-13:2014/A1:2017, EN 62384:2006 and EN 62384:2006/A1:2009- an inspection of the production location according to CENELEC Operational Document CIG 021- a certification agreement with the number 2158357

DEKRA hereby grants the right to use the ENEC certification mark.

The ENEC certification mark may be applied to the product as specified in this certificate for the duration of the ENEC certification agreement and under the conditions of the ENEC certification agreement.

This certificate is issued on 27 July 2020 and expires upon withdrawal of one of the above mentioned standards.

Certificate number: 71-114833

ANNEX TO ENEC CERTIFICATE 71-114833 page 1 of 2

DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-product-safety.com Company registration 09085396

SPECIFICATION OF THE CERTIFIED PRODUCT

Product dataProduct : Intelligent LED driver/controllerTrade name(s) : eldoLEDType(s)/model(s) : LINEARdrive 210D, LINEARdrive 211D, LINEARdrive 212D,

LINEARdrive 220D and LINEARdrive 222DRated current : 8 A max.Rated voltage/ nature of supply : 12 - 28 VdcPower factor : pf: 0,99Ambient temperature range : ta: -20...+50 °CMax. case temperature : tc: +65 °CDescription : Independent control gear

Product data – type LINEARdrive 210DDimming protocol : DALIAmount of output channel : 1

Product data – type LINEARdrive 211DDimming protocol : DMXAmount of output channel : 1

Product data – type LINEARdrive 212DDimming protocol : 0-10 VAmount of output channel : 1

Product data – type LINEARdrive 220DDimming protocol : DALIAmount of output channel : 2

Product data – type LINEARdrive 222DDimming protocol : 0-10 VAmount of output channel : 2

TESTS

Test requirementsEN 61347-1:2015EN 61347-2-13:2014EN 61347-2-13:2014/A1:2017EN 62384:2006EN 62384:2006/A1:2009

Test resultThe test results are laid down in DEKRA test file 224812800.

ANNEX TO ENEC CERTIFICATE 71-114833 page 2 of 2

DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-product-safety.com Company registration 09085396

Additional information- Constant voltage LED drivers.- SELV equivalent.- These drivers may only be used in combination with a power supply with a SELV output circuit which shall be short-circuit proof protected.

The list of components is laid down at test report 2248128.50.

ConclusionThe examination proved that all requirements were met.

Factory locationeldoLED B.V.Science Park Eindhoven 51255692 ED Son En Breugel, The Netherlands