DEKRA Certification B.V.

2 )drs. G.J. Zoetbrood Kate XuManaging Director Certification Manager

© Integral publication of this certificate is allowed

ACCREDITED BY THEDUTCH ACCREDITATIONCOUNCIL

DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396

CERTIFICATE

Issued to:Applicant:HEP Tech Co. Ltd.20 Jingke 7th RdNantun Dist408 Taichung, Taiwan

Licensee:HEP GmbHRamsloh 1058579 Schalksmühle, Germany

Product : Current controlled LED DriverTrade name(s) : HEP GROUPType(s)/model(s) : LAC120HV900, LAC36HV450, LAC75HV450, LADC120HV900, LADC36HV450

and LADC75HV450

The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.

DEKRA hereby declares that the above-mentioned product has been certified on the basis of:- a type test according to the standard EN 61347-1:2015, EN 61347-2-13:2014,

EN 61347-2-13:2014/A1:2017, EN 62384:2006 and EN 62384:2006/A1:2009- an inspection of the production location according to CENELEC Operational Document CIG 021- a certification agreement with the number 2013493

DEKRA hereby grants the right to use the ENEC certification mark.

The ENEC certification mark may be applied to the product as specified in this certificate for the duration of the ENEC certification agreement and under the conditions of the ENEC certification agreement.

This certificate is issued on 24 June 2018 and expires upon withdrawal of one of the above mentioned standards.

Certificate number: 88-104674

ANNEX TO ENEC CERTIFICATE 88-104674 page 1 of 2

DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396

SPECIFICATION OF THE CERTIFIED PRODUCT

Product dataProduct : Current controlled LED DriverTrade name(s) : HEP GROUPType(s)/model(s) : LAC120HV900, LAC36HV450, LAC75HV450, LADC120HV900,

LADC36HV450 and LADC75HV450Supply voltage : 220-240 VSupply frequency : 0/50-60 HzAmbient temperature (ta) : -20…+50°C

TESTS

Test requirementsEN 61347-1:2015EN 61347-2-13:2014EN 61347-2-13:2014/A1:2017EN 62384:2006EN 62384:2006/A1:2009

Test resultThe test results are laid down in DEKRA test file 340907000.

Additional informationThe LED controlgear is a built-in LED controlgear for LEDs with constant current. The LED controlgear can be used inside of luminaires. The LADC... LED controlgear is dimmable with DALI. The constant output current is setting by a resistor (LEDset). The insulation between primary and secondary circuit is non-insulated. The insulation between DALI and primary and secondary circuit is basis insulated. The insulation between primary, secondary and DALI circuit to the enclosure is basic insulated. The controlgear has screwless terminal. The max. enclosure temperature under abnormal or fault conditions is 110°C.

The list of components is laid down at test report 3409070.50.

ConclusionThe examination proved that all requirements were met.

Factory locationsHEP GmbHRamsloh 1058579 Schalksmühle, Germany

Weisen Electronic Co. Ltd.Sanzao Ind. Park of ZhuhaiZhuhai CityGuangdong Province, China

ANNEX TO ENEC CERTIFICATE 88-104674 page 2 of 2

DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396

Types: LAC36HV450, LADC36HV450:In= 175 mA; PF= 0,95; Urange= 50–115 Vdc; Uout= 160 Vdc; Irated= 120–450 mA; Prated= 6–36 W; tc= 70 °C

Types: LAC75HV450, LADC75HV450:In= 370 mA; PF= 0,95; Urange= 100–215 Vdc; Uout= 250 Vdc; Irated= 120–450 mA; Prated= 12–75 W; tc= 85 °C

Types: LAC120HV900, LADC120HV900:In= 585 mA; PF= 0,95; Urange= 100–210 Vdc; Uout= 250 Vdc; Irated= 240–900 mA; Prated= 40–120 W; tc= 80 °C