certified corrosion technician course · certified coating inspector course course details this...

For further inquiries please contact us: JOTAC Academy Sdn Bhd 03-8060 0192/ 8060 1903 – Cik Azira

016-3374684 – Encik Arif

CERTIFIED CORROSION TECHNICIAN COURSE

Course Details This course is designed to train new entrants on the best practices of corrosion monitoring and management. Participants will be exposed to the practical aspects of corrosion monitoring and control through sessions of classroom lectures, case studies, practical workshops as well as apprenticeship with inspection companies related to this competency. This comprehensive 1-year training will equip participant with skilled knowledge and best practices in the related field. An assessment will be conducted to determine the level of competency in accordance to the terms and standards of the industry. Objectives

• To grasp knowledge on the key-elements of corrosion monitoring.

• To acquire knowledge related to the process of corrosion monitoring.

• To acquire skill of using tools related to corrosion monitoring.

• To acquire skills related to techniques of inspection and cathodic protection monitoring. To identify the safety practices that should be observed when performing jobs at site.

Course Delivery Mode Phase 1: Classroom & workshop training Phase 2: On-site training Phase 3: Classroom refresher training and final assessment. Pre-Requisites to attend CT Apprentice Program Diploma in Engineering

Course Contents Certificate Certified Corrosion Technician Level 1 Awarding body NACE International or Institute of Materials, Malaysia (IMM) A certification body recognized by the Oil & Gas Industry in Malaysia. Who Should Attend This course is suitable for any individual who wish to pursue career as a professional in corrosion monitoring and inspection.

Module 1 : Health, Safety & Environment Module 2 : Fundamentals of Corrosion Module 3 : Corrosion Control Techniques Module 4 : GRP & Insulation Module 5 : Coating Application & Quality Control Module 6 : Cathodic Protection Anode QC & Surveys Module 7 : Corrosion Inhibition & Preservation Module 8 : Corrosion Monitoring Techniques Module 9 : Setting up equipment for installation and

retrieval Module 10 : Key elements for monitoring Module 11 : CP Monitoring System


016-3374684 – Encik Arif

CERTIFIED CATHODIC PROTECTION (CP) TECHNICIAN COURSE

Course Details This course is designed to train new entrants on the best practices of corrosion monitoring and management using the Cathodic Protection (CP) System. Participants will be exposed to the practical aspects CP system through sessions of classroom lectures, case studies, practical workshops as well as apprenticeship with inspection companies related to this competency. This comprehensive 1-year training will equip participant with the understanding on the supervision, installation, testing & commissioning of CP system as well as have sufficient troubleshooting, inspection & surveys skills and most importantly data interpretation. An assessment will be conducted to determine the level of competency in accordance to the terms and standards of the industry. Objectives

• To acquire knowledge on the basic of corrosion theory

• To grasp knowledge on the key-elements of CP system.

• To acquire knowledge related to the process CP system.

• To acquire skill of using tools related to CP system

• To attain skill related to techniques of special CP and Corrosion Survey

• To obtain skills of data collection and interpretation.

• To gain knowledge to troubleshoot CP system

• To attain skills of record keeping and documentation of CP System

• To identify the safety practices that should be observed when performing jobs at site.

Course Duration Phase 1: Classroom & workshop training Phase 2: On-site training Phase 3: Classroom refresher training and final assessment. Pre-Requisites to attend CT Apprentice Program Diploma in Engineering

Course Contents Certificate

Certified CP Technician Level 1 Awarding body NACE International or Institute of Materials, Malaysia (IMM) A certification body recognized by the Oil & Gas Industry in Malaysia. Who Should Attend This course is suitable for any individual who wish to pursue career as a professional in corrosion monitoring and inspection.

Module 1 : Theory of Corrosion Module 2 : Fundamentals of Cathodic Protection Module 3 : Installation of Cathodic Protection System Module 4 : Field Measurement Module 5 : Special CP and Corrosion Survey Module 6 : Troubleshooting of Cathodic Protection

System Module 7 : Quality Assurance and Quality Control Module 8 : Record Keeping Module 9 : Safety Module 10 : Introduction to CP Interference


016-3374684 – Encik Arif

CERTIFIED COATING INSPECTOR COURSE

Course Details This course is designed to train new entrants on the best practices of coating inspection and quality control. Participants will be equipped with skills and knowledge to demand sufficient authority for inspection decision to be recognized by both client and controller. This comprehensive 1-year training will equip participant with the understanding of inspection mechanism of coating quality. An assessment will be conducted to determine the level of competency in accordance to the terms and standards of the industry. Objectives This training aims to provide participants with the skill and knowledge to efficiently and effectively:

• Specify protection paint or coating systems to a variety of

substrates.

• Supervise the preparation of substrates prior to painting

• Supervise the application of paint coatings

• Conduct inspections and quality control to satisfy

government, industry and union minimum standards

• Diagnose and rectify faults in paint coatings and

communicate in written form


Course Contents Certificate Certified Coating Inspector Level 1 Awarding body NACE International or Institute of Materials, Malaysia (IMM) A certification body recognized by the Oil & Gas Industry in Malaysia. Who Should Attend This course is suitable for any individual who wish to pursue career as a professional in corrosion monitoring and inspection.

Module 1 : Introduction to Corrosion Module 2 : Composition and Manufacture of Paint Module 3 : Surface Preparation Module 4 : Application & Storage of Paints Module 5 : Coating Selection Module 6 : Paint Faults & Coating Defects Module 7 : Test & Measuring Instrument Module 8 : Safety & Health Module 9 : The Role of Coating Inspector Module 10 : Painting Specification


016-3374684 – Encik Arif

CERTIFIED WELDING INSPECTOR COURSE

Course Details This course is designed to train new entrants on the best practices of welding inspection and quality control. Participants will be exposed to different aspects of industrial welding technology and fabrication. This comprehensive 1-year training will equip participant with the understanding of safety, weld inspection, reporting, joint design, welding processes, welding metallurgy and materials behaviors during welding production. Theoretical and practical aspects of inspection techniques such as visual inspection test (VT), weld measurements, MPI, DPI, UT and RT will be part of the training by qualified welding personnel. An assessment will be conducted to determine the level of competency in accordance to the terms and standards of the industry. Objectives This training aims to provide participants with the skill and knowledge to:

• Improve safe welding practice.

• Understand welding practices carried out in their industry.

• Implement good welding practices in their industry

• Select right welding equipment in the industry

• Identify common welding defects and ways to overcome

them

• Make right selection of electrodes & materials

• Understand WPS, PQR, WQT for repair of pressure &

unfired pressure vessels


Course Contents Certificate Certified Welding Inspector Level 1 Awarding body SIRIM-STS for American Welding Society (AWS) Certification Who Should Attend This course is suitable for any individual who wish to pursue career as a professional in corrosion monitoring and inspection.

Module 1 : Introduction and Safety Practices Module 2 : Duties and Responsibilities Module 3 : Inspection, Test & Plan Module 4 : Inspection Report Module 5 : Welding Procedures Specification (WPS) Module 6 : Codes & Standards Module 7 : Construction Drawings (ISO Process,

Instrument Diagram, Details, etc) Module 8 : Joint Design Module 9 : Welding Process Module 10 : Welding Symbols Module 11 : Welding Metallurgy Module 12 : Materials Behavior of Metals Module 13 : Welding Defects Module 14 : Damage Mechanisms Module 15 : Non-Destructive Evaluation


016-3374684 – Encik Arif

TRAINING AND CERTIFICATION – 3G-SMAW

Objective: This course is crafted to enable participants to obtain formal training recognised by the international standards (such as American Society of Mechanical Engineers -ASME IX) in vertical position 3G SMAW. This course has been accepted by the local oil and gas industry as well as in shipping and fabrication industries. Course content: Theory:

• Safety, health and environmental (HSE)

• Introduction to welding

• Pre-heating and heating maintenance

• Welding techniques

• Mechanical properties

• Welding defects

• Welding procedure specification (WPS)

• Repair of welds

• Destructive tests

• Storage and handling of consumables

• Welding inspection

• Welding codes and standards Practical: Practice on welding of carbon steel in vertical 3G SMAW Duration: 3 months Certification: American Welding Society (AWS) / CSWIP Entry requirement: Age between 18 – 35, able to read and write, no work experience is required. Who to attend this course: This course is suitable for school-leavers who have high interest to become professional welders working in international work sites. Outcome: At the end of the training period participants will be able to gain considerable knowledge on safety at work site, able to execute welding as per the required welding procedure specification (WPS) on SMAW for grooved vertical position. Participants will have the entry level for working in highly regulated oil and gas industry as well as the shipping and fabrication industries.


016-3374684 – Encik Arif

TRAINING AND CERTIFICATION – 6G - SMAW

Objective: This course is crafted to enable participants to obtain formal training recognised by the international standards (such as American Society of Mechanical Engineers -ASME IX) in grooved 45 degree position 6G SMAW. This course has been accepted by the local oil and gas industry as well as in shipping and fabrication industries. Course content: Theory






• Welding defects


• Repair of welds




• Welding codes and standards Practical: Train and practice participants to execute welding of carbon steel in 45 degree position 6G SMAW Duration: 5 months Certification: American Welding Society (AWS) / CSWIP Entry requirement: Age between 18 – 35, able to read and write, no work experience is required. Participants who have obtained 3G SMAW certificate can continue for another 2 months to get 6G SMAW. Who can attend this course: This course is suitable for school-leavers who have deep interest to become professional welders working in international work sites. Outcome: At the end of the training period participants will be able to gain considerable knowledge on safety at work site, able to execute welding as per the required welding procedure specification (WPS) on SMAW for grooved 6G position. Participants will have the entry level for working in highly regulated oil and gas industry as well as the shipping and fabrication industries.


016-3374684 – Encik Arif

TRAINING AND CERTIFICATION – BASIC SHEILDED METAL ARC WELDING (SMAW)

Objective: This course is crafted to teach participants with the basic knowledge on welding of sheilded metal arc welding (SMAW). Participants will be spend 80% of the training time in workshop to do hands-on practical to perfect their skill in fillet welding technic. Course content: Theory: Module 1 - Safety, health and environmental Module 2 - Welding procedure and specification Module 3 – Welding process Module 4 – Quality control and inspection Practical: Practice on fillet welding on carbon steel in 2F position Duration: 2 days Certification: JOTAC certificate Entry requirement: Participants must be able to read and write and have interest in the profession. No working experience is required. Who can attend this course: This course is suitable for school-leavers who has interest the welding works Result: At the end of the training period participants will be able to understand required safety precaution at job site, basic knowledge of welding and its procedures, and criteria of good welding. The graduate of this course will have the opportunity to work in fabrication industry


016-3374684 – Encik Arif

TRAINING AND CERTIFICATION – BASIC GAS METAL ARC WELDING (GMAW)

Objective: This course is crafted to train participants with the basic knowledge on welding of gas metal arc welding (GMAW). Participants will be spend 80% of the training time in workshop to do hands-on practical to perfect their skill in horizontal fillet welding 2F. Course content: Theory: Module 1 - Safety, health and environmental Module 2 - Welding procedure and specification Module 3 – Welding process Module 4 – Quality control and inspection Practical: Practice on fillet welding on carbon steel in 2F position Duration: 2 days Certification: JOTAC certificate Entry requirement: Participants must be able to read and write and have interest in the profession. No working experience is required. Who can attend this course: This course is suitable for school-leavers who has interest the welding works Outcome: At the end of the training period participants will be able to understand required general safety precaution at job sites, basic knowledge of welding and its procedures, and criteria of good welding. The graduate of this course will have the opportunity to work in fabrication industry


016-3374684 – Encik Arif

TRAINING AND CERTIFICATION – 3G-GMAW

Objective: This course is crafted to enable participants to obtain formal training recognised by the international standards (such as American Society of Mechanical Engineers -ASME IX) in vertical 3G GMAW. This course has been accepted by the local oil and gas industry as well as in shipping and fabrication industries. Course content: Theory:






• Welding defects


• Repair of welds




• Welding codes and standards Practical: Practice on welding of carbon steel in flat vertical 3G GMAW Duration: 3 months Certification: American Welding Society (AWS) / CSWIP Entry requirement: Age between 18 – 35, able to read and write, no work experience is required. Who can attend this course: This course is suitable for school-leavers who have deep interest to become professional welders working in international work sites. Outcome: At the end of the training period participants will be able to gain considerable knowledge on safety at work site, able to execute welding as per the required welding procedure specification (WPS) on GMAW for grooved 3G position. Participants will have the entry level for working in highly regulated oil and gas industry as well as the shipping and fabrication industries.


016-3374684 – Encik Arif

TRAINING AND CERTIFICATION – 6G-GMAW

Objective: This course is crafted to enable participants to obtain formal training recognised by the international standards (such as American Society of Mechanical Engineers -ASME IX) in grooved 45 degree 6G GMAW. This course has been accepted by the local oil and gas industry as well as in shipping and fabrication industries. Course content: Theory:






• Welding defects


• Repair of welds




• Welding codes and standards Practical: Train and practice participants to execute welding of carbon steel in overhead position 6G GMAW Duration: 5 months Certification: American Welding Society (AWS) / CSWIP Entry requirement: Age between 18 – 35, able to read and write, no work experience is required. Participants who have obtained 3G GMAW certificate can continue for another 2 months to get 6G GMAW. Who can attend this course: This course is suitable for school-leavers who have deep interest to become professional welders working in international work sites. Outcome: At the end of the training period participants will be able to gain considerable knowledge on safety at work site, able to execute welding as per the required welding procedure specification (WPS) on GMAW for grooved overhead position. Participants will have the entry level for working in highly regulated oil and gas industry as well as the shipping and fabrication industries.


016-3374684 – Encik Arif

BASIC GAS TUNGSTEN ARC WELDING (GTAW)

Objective: This course is crafted to train participants with the basic knowledge on welding of gas tungsten arc welding (GTAW). Participants will be spend 80% of the training time in workshop to do hands-on practical to perfect their skill in horizontal fillet welding 2F. Course content: Theory: Module 1 - Safety, health and environmental Module 2 - Welding procedure and specification Module 3 – Welding process Module 4 – Quality control and inspection Practical: practice on fillet welding on carbon steel in 2F position Duration: 2 days Certification: JOTAC certificate Entry requirement: Participants must be able to read and write and have interest in the profession. No working experience is required. Who can attend this course: This course is suitable for school-leavers who has interest in welding works Outcome: At the end of the training period participants will be able to understand required general safety precaution at job sites, basic knowledge of welding and its procedures, and criteria of good welding. The graduate of this course will have the opportunity to work in fabrication industry


016-3374684 – Encik Arif

TRAINING AND CERTIFICATION – 3G-GTAW

Objective: This course is crafted to enable participants to obtain formal training recognised by the international standards (such as American Society of Mechanical Engineers -ASME IX) in flat horizontal 3G GTAW. This course has been accepted by the local oil and gas industry as well as in shipping and fabrication industries. Course content: Theory:






• Welding defects


• Repair of welds




• Welding codes and standards Practical: Practice on welding of carbon steel in flat horizontal 3G GTAW Duration: 3 months Certification: American Welding Society (AWS) / CSWIP Entry requirement: Age between 18 – 35, able to read and write, no work experience is required. Who can attend this course: This course is suitable for school-leavers who have deep interest to become professional welders working in international work sites. Outcome: At the end of the training period participants will be able to gain considerable knowledge on safety at work site, able to execute welding as per the required welding procedure specification (WPS) on GTAW for grooved 3G position. Participants will have the entry level for working in highly regulated oil and gas industry as well as the shipping and fabrication industries.


016-3374684 – Encik Arif

TRAINING AND CERTIFICATION – 6G-GTAW

Objective: This course is crafted to enable participants to obtain formal training recognised by the international standards (such as American Society of Mechanical Engineers -ASME IX) in grooved overhead position 6G GTAW. This course has been accepted by the local oil and gas industry as well as in shipping and fabrication industries. Course content: Theory:






• Welding defects


• Repair of welds




• Welding codes and standards Practical: Train and practice participants to execute welding of carbon steel in overhead position 6G GTAW Duration: 5 months Certification: American Welding Society (AWS) / CSWIP Entry requirement: Age between 18 – 35, able to read and write, no work experience is required. Participants who have obtained 3G GTAW certificate can continue for another 2 months to get 6G GTAW. Who can attend this course: This course is suitable for school-leavers who have deep interest to become professional welders working in international work sites. Outcome At the end of the training period participants will be able to gain considerable knowledge on safety at work site, able to execute welding as per the required welding procedure specification (WPS) on GTAW for grooved 6G position. Participants will have the entry level for working in highly regulated oil and gas industry as well as the shipping and fabrication industries.

certified corrosion technician course · certified coating inspector course course details this...

Documents