challenging to advanced materials and processing ... · y.kamino, y.hirala, k.sodeyama,...

SOCIETY FOR THEADVANCEMENT OF

MATERIAL AND PROCESS ENGINEERING

Proceedings of the Fifth JapanInternational SAMPE Symposium

Tokyo Big Sight, Tokyo, Japan

October 28-31,1997

CHALLENGING TO

ADVANCED MATERIALS AND

PROCESSING TECHNOLOGY

AIMING FOR NEW

INDUSTRIAL APPLICATIONS

UN1VERSITATSBIBUOTHEKHANNOVER

TECHNISCHE

INFORMATIONSBIBLIOTHEK

Edited By

Y.Miyano

M.Yamabe

PAPERS, AUTHORS AND SESSIONS

Plenary lectures ^a8c

Composite Grid Structures 1

S.W.Tsai

Ceramic Matrix Composites.-State of the Art and Future 7

Directions

R.R.Naslain

The State of the Composites and Advanced Materials World 13

R.B.Keyson

Polymers

Biodegradable Polymers, its Present Situation and Promising 19Future Prospects

T.Fujimaki

Fractal and Biodegradable Polyester Blends 25

K.Inoue, S.Asai and M.Sumita

Basic Research on Mctabolically Functional Polymer 31

T.Ishimasa, T.Takahata and K.Takeda

Numerical Prediction of Weatherability for Polymcs 37

T.Ogawa, Y.Fukushima, S.Osawa and K.Kimura

Flame Retardancy on the Basis on Reaction and Movement of 43Polymer Chain

M.Kinoshila, I.Teshima and K.Takeda

Nanostructural Basis for Moisture Diffusion in Epoxies 49

CLSoles, B.A.Bolan, H.A.Hristov, D.W.Gidley and A.F.Yee

Weld Line Strength in PC/ABS Injection Moldings 55

H.Hamada, M.Hiragushi and T.Senba

Mechanical Properties of Syndiotactic Polystyrene Injection 61Moldings

A.Fujita and T.Hasegawa

(12)


Page

Impact Behaviors of Ethylene based Ionomers in Tensile and 67

Penetration Mode

H.Akimoto, T.Kanazawa, M.Yamada and A.Murakami

Surface-Treatment and Hot-Water Exposure Effects on Fatigue 73

Behavior of Short Glass-Fiber Reinforced Nylon 6

A.Yamashita, A.Takahara and T.Kajiyama

Photon Emission during Deformation and Fracture of PPE/PS and 79

PPE/HIPS Alloys

T.Kitahara, T.Kuriyama and I.Narisawa

Effects of Chain End Group Chemistry on the Dewetting 83

Behavior in Polystyrene Ultrathin Films

E.Mounir, K.Tanaka, A.Takahara and T.Kajiyama

On Novel PA6,6/PP/SEBS-g-MA Blends 89

S.CWong and Y.W.Mai

Development of New Polymer Database System at JST 95

C.Maeda, E.Tsuchiya and KNagasaka

Phase Behavior of Poly(4-vinyl phenol)/Dodecylamine System 101

I.Akiba and S.Akiyama

New Process for Manufacturing Glass Fiber Reinforced 107

Polypropylene

T.Moriwaki

Polymer Matrix Composites

New Applications and Challenges in Composites 113

F.K.Chang

The Effect of an Adhesive Interlayer on the Residual Strength of 115

a CFRP Laminate with a Hole

P.Kim and T.Tanimolo

(13)


Page

Effect of Notch Geometry on the Fatigue Damage of Glass Fiber- 119

Reinforced Polycarbonate

H.Hyakutake and T.Yamamoto

Fracture Mechanism of Mode II Delamination Fatigue in 125

Interlayer -Toughened CFRP

S.Malsuda, M.Hojo and S.Ochiai

Stress Intensity Factors of Small and Large Cracks in 129

Transversely Reinforced Composite Plate

T.Ejima, T.Kitamura, N.Tada, R.Ohtani and S.Sakaguchi,

Micromechanical Modeling of Damage Progress in 133

Quasi-Isotropic CFRP Laminates

S.Kobayashi, N.Takeda and S.Ogihara

Impact Property of Low Modulus Pitch-based Carbon Fiber 139

Composite

S.Takemura, T.Malsumoto, M.Mohri, T.Nakanishi and H.Ohno

Influence of Flexible Material Laid in Hybrid Composites under 145

Impact Loading

A.Goto, T.Morii and I.Verpoest

The Behaviour of GFRP in Macrocomposite System Subjected to 151

Low Energy Impact

M.Toda, A.Murakami, P.J.Hogg and A.Ahmadonia

Impact Tensile Tests of Glass Fiber Reinforced Polypropylene by 157

Hopkinson Pressure Bar System

T.Ono, N.Soeda, H.Kubo and S.Takano

Assessment of Optimum Design Methodology of Laminated 161

Composites by Genetic Algorithm

A.Goto and A.Yokoyama

Computational Analysis of Bending Behavior of Polymeric 165

Composites Hybridized with Flexible Materials

A.Goto

(14)


Page

Manufacturing Aspects of Thermoplastic Composites 169

K.Friedrich

The Effect of Opening of Carbon Fiber Tow on Impregnation 175

Behavior of Thermoplastic Polymer and its TechnologicalApplication

K.Kawabe and T.Malsuo

CF Tow Prepreg for Filament Winding Processes 181

H.Komaki, M.Kawasaki and M.Mohri

Gradient Polymer Composites Moulded Under Centrifugal Force 187Field

M.Funabashi

Mechanical Properties of Reclaimed Rubber Filled with 193Carbonblack

M.Mouri, H.Okamoto, M.Malsushita, N.Sato, H.Honda, KNakashima, KTakeuchi,Y.Snzuki and M.Owaki

Mechanical and Thermal Properties of Blocked Pultruded 197Polyurethane Toughened Phenolic Resin Composities

CC.M.Ma and H.D.Wu

The Design of Hybrid Aluminum / CFRP Tubes 203

P.Kim and T.Tanimoto

Effect of Loading Path on Fatigue and Residual Strengths of 207

Polymer Matrix Composites under Tension/Torsion Biaxial

Cyclic Loading

T.Fujii, H.Kawakami and M.Tamiaki

Mechanical Properties of Soft Composites 213

N.K.Cuong, M.Inoda and Z.Maekawa

Effects of Stacking Sequences on Mechanically Fastened Joint 219

Strength in Quasi-Isotropic Carbon/Epoxy Laminates

K.Hanina

(15)


Page

Time and Temperature Dependence on Tensile Fatigue Strength 225

of Unidirectional Aramid Fiber Reinforced Plastics

M.Nalcada, Y.Matsumae, Y.Miyano, K.Gotou and Y.Yanagisawa

Two Development Results concerning Phenolic 229

Composite-Development for Surface Decoration Technic and A

Fireproof Material

H.Miyairi and T.Kitamura

Nylon Reinforced with Microfibrous Calcium Silicate Hydrate 235

H.Tanaka and K.Walanabe

Composite Rollers with Rubber Coats for Printing Machines 241

K.Aoyagi, M.Mohri, K.Sato and H.Onoda

Development of a CFRP Flywheel 245

T.Ikeda, A.Ohshima, N.Hirano, H.Ihara and A.Kojima

Flywheel Energy Storage System 249

A.Kojima, T.Ikeda, S.Seki and T.Itoh

Experimental and Analytical Studies of a Sling Support 253

Arrangement for GRP Composite Pressure Vessels

D.H.Nash and W.M.Banks

Novel Processing and Characterization of Metals

Computer Simulation on Grain Growth and Grain Boundary 259

Formation Mechanisms in Metal Solidification Process

T.Sakai, Y.Onda, T.Shuto and R.C.Biadl

The Fabrication of High Density Intermetallic Compounds by 265

Pressureless Sintering

J.Li, A.Chrysanthou and P.Tsakiropoulos

Process Development and Characteristics of Nickel Ultrafine 271

Powder

S.Ogasawara, H.Katayama, K.Saito and Y.Narita

(16)

PAPERS, AUTHORS ANDSESSIONS

Page

Introduction of MSC/MVISION 277

Y.Maejima

Development of Evaluation System of Materials Properties on the 283

Internet Using Java Language

T.Tsujikami and T.Horikawa

Material Strength Database for Reliability Design of Machines 289

and Structures Combined with a Software of STANAD

I.Nishikawa, A.Sugela, T.Sakai, T.Shuto, T.Yoshida and A Inoue

Statistical Analysis of Fatigue Strengths of Notched Specimens 295

Based on JSMS Fatigue Strength Database

Y.Kobayashi, A.Sakaida, H.Nakayama, T.twaya, N.Hasegawa and T.Tanaka

Fatigue Behavior of Normalized S35C Steel Plain Specimens in 301

Three Atmospheres

M.Golo, T.Yamamoto,T.Sakai and N.Kawagoishi

Fatigue Crack Initiation of Structurally Compound Materials 307

S.Nishida, N.Hatlori, N.Nakade and H.Takigawa

Effects of Ni Content and Heat Treatment on Fatigue Crack 313

Growth Property of a Maraging Steel

M.Miyahara, KToyama, Y.Okada, K.Kondo and M.Umino

Machanical Property and Corrosion Resistance of A201HP.(High 319

Purity A201 Aluminum Alloy)

T.Isayama and O.Shibata

Statistical Fatigue Properties of Fe7,B13Si9 Amorphous Ribbon in 323

Cyclic Tensile Loading

T.Sakai and K.Takeuchi

Fatigue Strength of Aluminum Compound Alloy 329

T.T.Kiem, Y.Yano, S.Nishida, N.Hattori and S.Ono

Fatigue Properties of Highly Deformed Materials 335

A.I.Zaky, S.Nishida, N.Hattori and F.S.Wu

(17)


Page

Improvement of Deep Drawing Technology for Stainless Steel

Sheets by Warm Press Forming and its Application to Industry

K.Nohara, Y.Watanabe and N.Ohashi

341

A Novel Process for Producing High Strength 17-4PH Stainles

Steel Bolts

347

S.Isogawa, H.Yoshida, Y.Hosoi and Y.Tozawa

Infrared Stress Measurement of Friction Welded Joints-TypeC1020 Copper / SUS304 Stainless Steel

353

Y.Fukuchi and K.Okita

Dynamic Fracture Toughness of Low Carbon Steel 359

H.Qhi, M.Enoki and T.Kishi

Quantitative Analysis of Sectional Shape Irregularity of Graphite 365

Particles in Cast Iron

T.Sakai, M.Fujikawa, M.Nakatsuji and S.Kogoh

Characterization of Friction Behaviors in Metals by Acoustic 371

Emission

T.Takagi, S.Wakayama and M.Yang

Classification of Ultrasonic Flaw Signals by Means of 377

Time-Frequency Analysis(Development of Single Ultrasonic

Signal Method)

Y.Fukuda and H.Kilagawa,

Metal Matrix Composites

Innovations in Fabrication, Processing and Properties of MetalMatrix Composites and Related Materials

H.Asanuma

Developments of Metal Based Smart Composites 387

H.Asanuma

Fracture Characteristics of a SiC Particulate Reinforced 7075Aluminium Alloy

T.Chandra, D.Yu, A.Razaghian and H.Asanuma

391

(18)


Page

Aluminum based Metal Matrix Composite Reinforced with 399

Low-cost Surface-modified 9A1203 • 2B20, Whisker

Y.Shintani, Y.Okochi and M.Sugiyama

Fabrication and Mechanical Properties of SCS-6/ y -TiAl 405

Composite

H.Nakatani, M.Imula, Y.Shimada, N.Akikawa, Y.Mizuhara and K.Hashimolo

Development of MMC Rotor for Advanced Material 411

Gas-generator

K.Moriya, N.Suzumura, S.Nishide, M.Onozuka, S.Masaki and K.Yasuhira

Superplastic Forming of Titanium Matrix Composite Material 417

(TMC)

T.Yamada, H.Sato and T.Tsuzuku

Interfacial Reaction and Interface Structure of Al18B403jW/Pure 423

Al Composite

L.Yao, G.Sasaki, M.Yoshida and H.Fukunaga

Effects of Si and Mg Contents on Mechanical Properties of 429

Aluminum-Borate Whisker Reinforced Aluminum Alloys

N.Nishino and S.Towata

Development of Aluminum Alloy Matrix Composites 435

H.Shimojima, T.Kimura, K.Naito, H.Takahashi, T.Higuchi, M.Hayashi andT.Koyama

Nitriding Technique Using a NH3-Hydrocarbon System 439

H.Kotaka

Sliding Wear Behavior of AMCs During Cyclic Loading 445

R.A.Saravanan and M.K.Surappa

Wear Properties of Self-Lubricating Aluminum Matrix 451

Composites in Coolant

A.Mizuta, H.Hino and S.Okazaki

A New High Productivity MMC Cylinder Block and It's Sliding 457

Properties

H.Ushio and K.Shibata

(19)


Page

Powder Forging with Sintering and Chemical Reaction between 463Titanium and Aluminum Powders

T.Nakamura, S.Tanaka, K.Hayakawa, H.Imaizumi and Y.Morita

Microstructure and Mechanical Properties of 469

Reactive-hot-pressed Nickel Aluminide Matrix Composites

M.Inoue, K.Suganuma and K.Niihara

Thermal Conductivity of Al/Al3Ni FGMs Manufactured by 475

Centrifugal Method

Y.Watanabe, Y.Kato, Y.Terada and T.Mohri

Interfacial Reaction and Microstructure in TiO/AI Composites 481

J.Pan, H.Fukunaga, X.G.Ning, J.H.Li and H.Q.Ye

Electrochemical Machining of Silicon Carbide / Aluminum 487Metal-Matrix Composites

L.H.Hihara and P.Panquites

Development of New Powder Forming Process for Aluminum 493Matrix Composites

E.Maeda, N.Kanetake and T.Choh

Swaging Workability of Duralcan Tube and its Mechanical 497

Properties after Swaging and Welding

H.Hori and H.Hino

High Strain Rate Superplasticity of TiC Particulate Reinforced 503

Aluminum Composites

T.Imai, S.Kojima, D.Jiang, J.Mao, G.L.Esperance and B.Hong

High Strain Rate Superplastic Forming for Rectangle Parts of 509Particle Reinforced Aluminum Matrix Composite

T.Ninomiya, H.Hira, N.Kanetake and T.Choh

Ceramics

Fracture Mechanism of C/C Composites by Means of Acoustic 513Emission Analysis

J.H.Koo, B.N.Kim, M.Enoki and T.Kishi

(20)


Page

Oxidation Mechanisms of Si-Ti-C-0 Fiber-Bonded-Ceramics 517

N.Tohyama, B.N.Kim, M.Enoki and T.Kishi

Preparation and Mechanical Properties of Carbon Fibers/Shirasu 523

Glass Composites

Y.Kamino, Y.Hirala, K.Sodeyama, Y.Fukushige, S.Sameshima andY.Kamata

Thermal Shock Fracture Process in A1203 Ceramics Characterized 529

by Acoustic Emission

M.Salo and S.Wakayama

The Anelastic Behavior in Y-TZP Ceramics 535

L.S.Pan and S.Horibe

A Microstructural Study of Crack Growth Behavior in Zirconia 541

Ceramics

A.Onuki, M.Sugano, K.Sakakibara and T.Satake

Relationship between Hardness and Fracture Toughness of a 547

9.7mol% MgO Partially Stabilized Zirconia Alloy and HighSpecific Strength Metallic Materials

S.Muneki, F.Abe and H.Irie

Cyclic Fatigue Crack Initiation and Propagation in Si3R, at High 551

Temperature

Y.Miyashila, B.S.Zainuddin, S.Zhu and Y.Mutoh

Cyclic Fatigue and Dynamic Creep Properties of Sintered Silicon 557

Nitride Ceramics at Elevated Temperatures

K.Hatanaka, K.Oshita and H.Takagi

Fatigue Crack Propagation Characteristics of Polycrystalline 563

Ceramics

H.Noguchi, K.Mori and R.Imai

Effect of Pre-Loading on Strength of Sintered Si3N„ 569

H.N.Ko, Y.Kaloh, H.Itoga and T.Hasegawa

Strength Evaluation and Fracture Mechanisms of TiB2 Ceramic 575

H.Shiota, K.Tokaji, T.Ogawa and S.Senda

(20


Page

A Study on Cohesive Crack Models for R-Curve Behavior of

Ceramics

S.Hayashi and A.Suzuki

Analysis of R-curve on Alumina Ceramics by Random Walk

Simulation

S.Sakaguchi

The Decrease in the Width of Hysteresis Loops and the

Compliance Change Associated with the Grain BridgingDegradation under Cyclic Loading

A.Ueno, A.J.Mcevily and H.Kishimoto

Inverse Analysis Method of Bridging Stress Based on the

Bending Test of a Deep-Notched Specimen

K.Mori, S.Hashimura and R.Imai

The Effect of Crack Geometry on R-curve Behavior of

SiC-whisker Reinforced Alj03 Composite

T.Akalsu, S.Hirai, Y.Tanabe, E.Yasuda and T.Nishida

R-Curve Effect on Thermal Shock Damage

M.Sakai

Textile Composites

Development Trends in Textile Reinforcements for Composites 617

J.Brandt, K.Drechsler and J.Filsinger

Physical Characteristics of Cortical Bone Consisting of Layers of 623

Quasi-cylindrical Laminates of Arranged Rigid CollagensCovered with Soft Material and Corresponding Liquid

T.Hirai, Y.Watanabe and A.Fujita

The Potential of Knitting for Engineering Composites 629

K.H.Leong, S.Ramakrishna and H.Hamada

Tensile Behaviour of Knitted Fabric Reinforced Elastomeric 635

Composites

S.Ramaswamy, S.Ramakrishna and S.H.Teoh

581

587

593

599

605

611

(22)


Page

Notched Tensile Strength of Knitted Fabric Composites 641

J.Haan, K.Kameo, A.Nakai, A.Fujita, J.Mayer and H.Hamada,

Knitted Materials and their Fields to Play on in Japan 647

T.Ishida, S.Gotoh and H.Miyairi

The Effects of Deforming Knitted Glass Preforms on the 653

Composite Compression Properties

M.Nguyen, K.H.Leong and I.Herszberg

Spherical Shape Forming of Carbon Braid Reinforced 659

Thermoplastic Composite Tube

J.Ozaki, K.Manabe and K.Neki

Application of Microbraiding Technique with Thermoplastic 665Resin

H.Hamada, A.Nakai and M.Sakaguchi

Large Scale I-Shaped Braided Composite 669

M.Masui, A.Nakai and H.Hamada

Mechanical Properties of a Three-Dimensionally Braided 675

Composite Material

H.Tamaki, M.Malsumoto, M.Kimbara and K.Fukula

Assessment Method for Fracture Behavior of Composite 681

Materials by Acoustic Emission

A.Yokoyama, T.Kubo and Y.Fujii

Fibro-Science in Composite Materials — Effects of Surface 687

Treatment on Properties of Textile Composites—

H.Hamada, A.Fujila, A.Nakai and M.Sakaguchi

Impact Damage Properties of 3-D Carbon/Bismaleimide 691

Composites

I. Susuki and T.Takatoya

Impact Resistance and Tolerance of Thin Stitched Plain Weave 697

Carbon/Epoxy Laminates

I.Herszberg and M.K.Bannisler

(a)


Page

The Impact Damage Resistance of Stitched and Unstitched 703

Postbuckled Carbon/Epoxy Laminates

I.Herszberg and T.Weller

Some Design Considerations for Fibre Reinforced Plastic 709

Structures

T.A.ColIings

Design of Textile Composites in Consideration of Micro-Fracture 715

at Fiber Crossing Part

A.Nakai, K.Bansaku, N.Takeda and H.Hamada

A New Modeling Procedure for Estimating the Elastic Moduli of 719

Knitted Fabric Composites

Z.M.Huang, S.Ramakrishna, A.A.O.Tay, S.H.Teoh and C.L.Chew

Rehabilitation of Concrete Structures by Composite Materials 725

S.Urai, I.Monno and A.Yokoyama

Composite Interface

Interphases in Filler Composites: Micromechanical and 729

Microdielectric Transitions

F.HJ.Maurer

The Application of Imidazolesilane to Epoxy Resin 733

Y.Akulsu and M.Kumagai

FD-MS Analysis of Silane Coupling Agents on Glass Fiber 737

M.Yasueda, K.Watanabe, A.Yanagawa and N.Ikula

Effects of Interface Structure on Interfacial Shear Strength of 743

Glass Fiber / Epoxy Composites

F.M.Zhao, N.Takeda and N.Ikula

Silane Coupling Functions and Fracture of Composites 749

N.Ikula and H.Hamada

(a)


Page

Investigation on Resin Interphase Produced Near Silane-Finished 753Glass Fiber in Composites

Y.Suzuki, A.Yanagawa and N.Ikuta

Evolution of the Mechanical Properties of a Glass-Epoxy 759

Composite in Wet Environment. - Role of the Matrix and theInterface-

CSuri

Design of Flexible Interphase and Effect on Mechanical 765

Properties of Aramid Composites

K.Kitagawa, S.Hayasaki, N.Ikula and Z.Maekawa

Proposal of Peeling Test Method of FRP Sheets Bonded on 771

Concrete

K.Yamaguchi, I.Kimpara, K.Kageyama, T.Suzuki and LOsawa

Constraint Effect of Adherends on Stress Field near an Interface 777Crack Tip between an Adhesive Layer and an Adherend

T.Ikeda, K.Gondo and N.Miyazaki

Effects of Matrix Resin of GFRP Adherends on the Strength of 783

Adhesively Bonded Joints

K.Osaka, T.Fukuda, H.Tanaka and T.Awaji

New Analysis on the Fibre Push-Out Problem with Interface 789

Roughness and Thermal Residual Stresses

Y.S.Chai and Y.W.Mai

AE Monitoring of GFRP at the Environmental Creep Conditions 795

Y.Fujii

Evaluation of Interphase Properties on Mode I Interlaminar 799

Fracture Behavior of Long Glass Fiber Reinforced PolypropyleneComposites

H.Hamada and K.Fujihara

Mode II Fatigue Delamination Growth of Interleaved Composite 803

Laminate

K.Esaki, I.Kimpara and K.Kageyama

(25)


Page

Improvement by Silane Treatment on Transfer Molding of GFRP 809

N.Ikuta, T.Morii, S.Ohori and T.Tsuchiya

Study on Interphase Properties of Glass Fiber reinforced 813

Polypropylene Injection Moldings

H.Hamada, A.Hamamoto, M.Hiragushi, T.Sekiya, N.Nakamura and M.Sugiyama

Effects of Interface on Mechanical Properties of PA Injection 819

Moldings

H.Hamada, M.Hiragushi, T.Hasegawa and KTakahashi

Simulation of Fracture Behavior of Adhesive Interface in Joint of 825

Laminate Composites

S.Teramae, A.Yokoyama, T.Mishiwaki and K.Haruna

Mulliken:A Unified Statistical Mechanics and Quantum 829

Chemistry Package and its Parallel Platform.RS/6000 SP

J.Pacansky, E.Tamura and Y.Hirao

A Micro/Macro Coupled Analysis System 833

Y-M.Li

A Visualized Analysis Tool for the Material Behavior During 839

the Impact Loading

T.Ohta and T.Walanabe

What kind of Potentiality Does the Homogenization Method Have 843

for the Creation of Advanced Materials and Industrial Seeds?

N.Takano and M.Zako

Effects of Interphase Properties on Microscopic Damage in 847

Embedded Single Fiber Transverse Tensile Test

K.Nishiyabu, A.Yokoyama and M.Zako

Damage Analysis of Poly-Arylate Fibre/Epoxy Quasi-Isotropic 853

Plate Using Quasi-Three-Dimensional Model

S.Hayasaki, K.Kitagawa .T.Nishiwaki, A.Yokoyama and Z.Maekawa

Application of the Quasai-Three-Dimensional Model to 859

Eigenvibration Problem of Adhered Planes Structures

T.Nishiwaki, A.Tange and Z.Maekawa

(26)


Smart Materials and Structures Page

The Progress of Smart Structures Using Fiber Optic Sensors in 865

Korea

CS.Hong

Application of Loop Type Fiber Optic Sensors 871

J.Takahashi, M.Nomura, H.Tsuda, K.Kemmochi and H.Fukuda

Detection of Load Distribution by Using Modal Domain 875

Multiplexed Fiber Optic Sensor System

T.Kosaka, J.Kalo, M.Hara and N.Takeda

The Effect of Embedded Optical Fiber Sensors on the Mechanical 881

Behavior of Composite Laminates

D.C.Lee, D.C.Seo, J.J.Lee and CS.Hong

Evaluation of an Optical Fiber Embedded SiC/Al Composite 887

Fabricated with Copper Insert

H.Du, RAsanuma, K.Maeno and C.Prat,

Signal Characteristics in the Delaminated Composite Specimen 893

with Fiber Optic Sensor

J.W.Park and CS.Hong

Delamination Detection by Electric Resistance Change for 899

Graphite/PEEK Composites

A.Todoroki

Effect of Shot-peening on Fatigue Strength of TiNi SMA Coil 905

Spring under Cyclic Thermal Extension Fatigue

M.Misumi and MOhkubo

Buckling Characteristics of SMA Wire Reinforced Laminated 909

Composite Plates

Y.C.Yang, H.C.Song, H.C.Park, W.Hwang and K.S.Han

Stiffness Change of Fiber Reinforced Composite Laminates with 915

SMA Embedded Layers

S.Motogi, M.Tanaka and T.Fukuda


Page

On Self-repair for Microcracks in FRP 919

M.Zako, N.Takano and H.Fujioka

Evaluation of Crack Closure in Intelligent Epoxy Material with 925

Embedded SMA

E.Umezaki, E.Kawahara and H.Watanabe

Refined Analysis of Composite Plates with Distributed 931Piezoelectric Actuators for Vibration Control

I.Lee and J.H.Han

Passive Damping of CFRP Beams Using Bonded PZT Sheets 937

T.Tanimolo, P.Kim and T.Hanazawa

Vibration Responses of CFRP Sandwich Beam Controlled by 941

Electro-Rheological Fluids and Piezoceramic Actuators

T.Fukuda, K.Nakashima and T.Takawa

Performance of a CFRP/Metal Laminate Actuator 945

H.Asanuma, K.Takemoto, O.Ohtsu and O.Haga

Multi-modes Vibration Control of Composite Beam with 949

Piezoelectric Film Actuators and Fiber-optic Laser DopplerVibrometer

T.Ishimaru, I.Kimpara, K.Kageyama, T.Suzuki and I.Ohsawa

Multi Modal Vibration Control of Laminated Composite Plates 955

using System Identification and Optimal Control

J.S.Kim, H.CPark, W.Hwang and KS.Han

Vibration Control of Laminated Composite Beam using Optical 961Fiber Sensor

B.S.Chun, W.S.Park, H.CPark, W.Hwang and K.S.Han

Testing and Characterization

Creep Behavior of Matrix of BMC 967

S.Somiya and Y.Shirala


Page

Preparation of Micro-Cross-Sectional Specimen for Local Point 973

Observation and Analysis by Use of FIB Technologies

M.Shimizu

Time, Temperature and Concentration Dependences of Alkaline 977

Degradation of GFRP

M.Kasamori, Y.Funada, K.Awazu, Y.Miyano and M.Nakada

Fracture Toughness of Dental Adhesive Resins and its Testing 983

Method

H.Miyairi, M.Nagai and H.Ai

Electric Properties of Barium Zinc Tantalate-Bariun Magnesium 987Tantalate Ceramics Modified with Ceratain Additives

H.Ohuchi, H.Ito and M.Okajima

Fatigue Strength of CFRP Pipes Using High Modulus Carbon 993

Fiber

A.Imakila, H.Matsushita, K.Nagata, K.Kemmochi, J.Takahashi, H.Tsuda, K.Inayama and

Y.Maeda

Characterization of Two-Phase Composites in Terms of the 999

Percolation Phenomenon

K.Yoshida

FRP Sandwich Panels with Concurrent Performance for Noise 1003Insulation and Electromagnetic Shield

T.Ogasa, K.Kemmochi, H.Tsuda, A.Nishizaki and K.Tanaka

Mechanical Properties of Freeze-dried Alumina/Silicon Carbide 1009

Whisker Composites

S.Izawa, H.Watari and H.Ona

Perforation Characteristics of Aluminum Composite Plates 1013

Subjected to High Velocity Impact

H.Kasano

Polymer and Polymer Composite Processing

Relationship between the Morphology and the Properties of 1019

LCP/Thermoplastic Resin Blends

T.Okumura, K.Mizutani and A.Fujita

(29)


Page

The Effect of Interfacial Situation on the Impact Strength of 1023

Reactive Compatibilized Polyamide6/polycarbonate Blends

S.Horiuchi, T.Kitano, T.Unryuo and KAraki

On Processing System of Microcellular Plastics 1029

M.Shimbo and H.Nagashima

Epoxyacrylate Resins for Artificial Marbles 1033

T.Nakabayashi, H.Takayanagi and T.Moroiwa

U-Pica SMC 8121 with Excellent Vibration Damping Property for 1039

Compression Molding

H.Yamamura, S.Iizuka, T.Uruji, M.Yamaguchi, Y.Koizumi and H.Hayashi

CAE System for SMC Compression Molding 1045

K.Fulamata and H.Nailo

Conductive Glass Mat Thermoplastic 1051

H.Nishioka

Advanced Composite Fiber Placement: Process to Application 1055

M.J.Pasanen, J.P.Martin, R.J.Langone and J.A.Mondo

Application of Micro-wave Irradiation for Composite Processes 1061

T.Kitano and T.Tanegasima

Cylindrical Forming of Al / KFRP Hybrid Material by 1067

Computer-Aided Bending Machine

E.Zhang, H.Koyama and O.Haga

Melt Relaxation Behavior at Welding in Injection Moldings 1073

KTomari, H.Hamada and H.Yamane

Processing and Mechanical Properties of Polyamide Sandwich 1079

Injection Moldings

A.Fujita and K.Takahashi

(30)


Page

Development Status of Resin Transfer and Resin Film Infusion 1085

Moulding for Structural Applications

A.R.Mills and PJ.Hogg

Three-Dimensional Analysis on Twin Screw Extruders and 1091Evaluation of their Mixing

K.Funatsu, L.Liu, M.Yoshinaga and S.Katsuki

Predictions of Optimum Conditions for Pultrusion Process of 1095

Composite Materials by Finite Element Method

A.Yokoyama

Predictions of Optimum Conditions for Injection Molding by 1099Genetic Algorithm

A.Yokoyama

Adaptive Quality Assurance in Injection Molding 1103

K.Yakemoto, T.Shiroganeya, H.Ito and T.Sakai

Application-Aerospace

Effects of Thermal Cycling on Transverse Cracking in CFRP 1109Laminates

S.Ogihara, N.Takeda and A.Kobayashi

Application of FEM Damage Simulation for Composite 1115Laminates with Open Hole

Y.Shimamura, A.Todoroki, H.Kobayashi, H.Nakamura andT.Inada

Evaluation of Moisture-Induced Behavior of CFRP by Ultrasonic 1119Wave Propagation Characteristics

Y.Okabe and N.Takeda

Optimum Design of Composite Wing Model for Aeroelastic 1125

Properties

M.Kameyama, H.Fukunaga and H.Sekine

New Trends in Composite Applications to Aerospace 1131

M.Ashizawa

(31)


Page

Strengths of Heat Resistant Thermoplastic 1137

Composites(IM-7/PIXA) for Future High Speed Civil Transport

T.Ishikawa ,M.Matsushima, Y.Hayashi and H.Nakamura

Development of the CFRP Compressor Stator Vane for 1143

Gas-turbine

K.Yamagishi, H.Yagi, H.Morita and A.Hamamoto

Effect of Fiber Volume Fraction on Dynamic Compressive 1147

Failure of Glass Fiber Reinforced Polymer Composites

J,Yuan, M.Hiramatsu, N.Takeda and A.M.Waas

Aircraft Engine Materials: Recent Trends and Future Directions 1153

J.CWilliams

The development of Ceramic Matrix Composite (CMC) for 1159

Combustors of Gas Turbine Engine

K.Nishio, K.Igashira and S.Okazaki

Application of C/C Composites with SiC/C Functionally Graded 1165

Material (FGM) Coatings to Rocket Combustion Chambers

N.Kiuchi, Y.Kude, Y.Ido, Y.Sohda, K.Kusaka, M.Tadano, M.Sato and A.Moro

Application of Advanced Carbon-Carbon Composites to A Tip 1171

Turbine Structure of the Atrex Engine

H.Hatta, N.Tanatsugu, Y.Kogo, H.Ohnabe, M.Onozuka and F.Tomioka

A Certification Plan of Composite Control Surfaces for Basic 1177

Trainer Aircraft

H.S.Oh, S.M.Jun and Y.M.Han

Application- Automotive

New Type of Formable High-Strength TRIP-Aided Bainitic Sheet 1183Steels for Automotive Applications

K.Sugimoto, M.Kobayashi and H.Shirasawa

The J-Shell; A Novel Body Structure of a Vihicle Containing 1189Electric Circuit

T.Marui and M.Nakamura

Crashworthiness of Vehicle Composite Panels and Components 1193

RCChirwa

(32)


Page

Numerical Analysis for Crushing Behavior of FRP Tube 1199

A.Yokoyama

Static and Impact Flexural Response of CFRP/Plastic Foam 1203

Sandwich Composite

T.Morii, H.Sano, R.Sakai and H.Hamada

The Fracture Behavior of Stampable-Sheet Laminates under 1207

Static and Impact Flexural Loading

T.Morii and K.Nagayama

Properties of KP-Sheet Containing Long Glass Fiber as a 1211

Reinforcement in Polypropylene Matrix and its Application for

Automotive Use

N.Soeda, H.Kubo and Y.Araki

Composites in Crashworthiness Applications- New Advances in 1215Structural Analysis and Testing

H.Adam, M.Philipps and J.Brocking

Estimation of Crushing Properties of FRP Tubes 1221

T.Nakatani andH.Hamada

The Effects of Through Thickness Reinforcement on the Crush 1225

Behaviour of Composite Plates

P.I.Hogg, L.Daniel andP.T.Cuitis

Crushing Properties of Braided I-Beam 1231

H.Hamada, A.Nakai, T.Nakatani and K.Kameo

Crush Energy Absorption of Braided Composite Rods 1235

A.Fujila, T.Nakatani, T.Uozumi, K.Kameo, A.Nakai andH.Hamada

Application- Railway

New Shinkansen Driving Cab Made of Module FRP 1239

A.Watanabe, T.Ota and Y.Misasa

(33)


Page

Study on Body Structure of Shinkanscn Using Aluminum Alloy 1245

Large Extrusion Hollow Panel

M.Kimata, J.Ito, S.Banlo, K.Oida and M.Hattori

Fatigue Properties of Brazed Aluminum Honeycomb Panels 1251

K.Yamada, H.Mizukoshi, H.Okada and E.Imoto,

Application of Precipitation-Hardened Copper Alloy for Contact 1255Wire

S.Aoki and H.Nagasawa

LCA for Shinkansen Vehicle 1261

T.Miyauchi, T.Nagatomo and H.Tsuchiya

Degradation of Train Rubber Hose 1267

M.Hansaka, N.Mifune, Y.Nishimura and N.Ikoma

Study on the Damping Properties of Magnetic-Vibration-Damper 1273

H. Sato, M.Hansaka, N.Mifune,H.Takinosawa and K.Nishimoto

Sound Absorption Property of Porous KP-Sheet Made of 1279

Polypropylene and Glass Fiber

M.Fujimaki, K.Nagayama and S.Takano

Development of Testing Method for Adhesiveness of Proteinous 1283Stain on Coated Surface of Vehicle

S.Endo, T.Enari, H.Machida and M.Tanaka

Application- Marine

Advanced Composite Materials in Sailboat Structures 1287

T.Takahashi

Research and Development of Light-Weight Racing Boats Made 1291of Advanced Composite Materials

I. Kimpara, H.Takemolo, A.Tamura and T.Sasaki

Development of Computer Aided for Manufacturing System for 1295Advanced Composite Marine Structures

T.Takaloya, I.Kimpara and K.Kageyama


Page

Water Absorption and Strength Properties of Polypropylene 1301

Composites at Frozen Sea

A.Sakurai

Application of Optical Fiber Sensors to Marine Structure 1305

H.Murayama, I.Kimpara, K.Kageyama, T.Snzuki and LOhsawa

Application- Sports and Leisure

Performance of Baseball Bat 1311

T.Naruo and F.Salo

The Development of FRTP Material and its Application into 1317

Tennis Racket

K.Muroi and Y.Shimizu

Performance Prediction of Tennis Rackets with Materials of the 1323

Wood and the Modern Composites

Y.Kawazoe

Racket Science Applied to Golf 1329

S.Davis

Considerations on Mechanical Properties and Shape of Skis 1335

T.Sakata and T.Ilo

Reserach on the Laminate Structure of Thin Wall CFRP Pipe 1341

T.Kurokawa

Application-Civil and Architectural Engineering

Evaluation for Degradation of Rubber Buffer Material along 1345

Depth Direction

Y.Nishimoto, F.Terashita, N.Ikoma and N.Mifune

On the Durability of Fiber Reinforced Rubber(FRR) 1351

F.Terashita, Y.Nishimoto, N.tkoma, S.Kohjiyaand N.Mifune

(35)


Page

Experimental Investigation for Effect of Impact Load Reduction 1355in RUBBER JOINER

N.Ikoma and K.Tokubuchi

Development of Effective Accelerators for Portland Cement 1361

Concrete

HJustnes

Characterization of Powder for Self-Compacting Concrete 1367

T.Mitlorikawa, K.Maruyama and T.Shimomura

Effects of Fly Ash and Silica Fume on the Chloride Binding in 1373

Cement Pastes

Y.S.Soh, S.Y.So and S.H.Mun

Acoustic Emission Diagnosis of an Arch Dam under Construction 1379

O.Minemura, N.Sakata, S.Yuyama, T.Okamoto and K.Maruyama

Reduced Up-Down Vibration of System of Hanging Object in 1385Osaka Dome

Y.Fukao, S.Igarashi, K.Simizu and N.Kobayashi

Development of Highly Translucent Membrane 1391

H.Takahashi, M.Aburakawa, H.Abe, E.P.Lin and K.M.Sahlin

Strength Properties of High-Early-Strength Polymer-Modified 1397Mortars with a Calcium Aluminate-Based Accelerator

K.Demura, Y.Ohama and T.Uchiyama

Use of Polyurethane Concrete for Noise Insulation in ONDOL 1403

Y.S.Soh, Y.KJo, J.H.Kang and KJ.Mun

Development and Evaluation of Precast Polymer Concrete Flume 1409

K.S.Yeon, J.D.Choi, D.S.Choi and N.J.Jin

Production and Evaluation of Road Curbstone Made of Polymer 1415Concrete

K.S.Yeon, J.D.Choi, M.K.Joo and K.R.Kim

(36)


Page

New Methylmethacrylate Liquid Resin System for Repair of Slab 1421Track

M.Suzuki, N.Mifune and H.Konishi

The Innovative Concrete Digester Tank 1425

K.Aoyagi and K.Maruyama

Ductile Behavior of Polyethylene Fiber Reinforced Cementitious 1429Composites

H.Nakamura and H.Mihashi

Strengthening and Repair of Existing Concrete Structures with 1435Carbon Fiber Sheet

T.Ando, T.Hoshijima and K.Yagi

Experimental Studies on Carbon Fiber Retrofit of Railway 1441Viaducts Columns

M.Okano, H.Ohuchi, T.Moriyama, N.Malsumoto and H.Wakui

Analysis of Bond Behavior between CFRP Sheet and Concrete 1447

Y.Sato, K.Kimura and Y.Kobatake

Metal, Fibro-Composite, and Hybrid Beams: A Comparative 1453

Study

P.Kim

Application of Recyclable Thermoplastic FRP for Reinforcement 1457for Lightweight Precast Concrete

T.Fukushima, K.Sakayama and S.Hashimoto

Application- Energy

Microstructural Development in HAZ due to Irradiation of 1463

SUS304 Stainless Steels

H.Kinoshita, H.Takahashi and S.Nakahigashi

The Development of Single Crystal Austenitic Stainless Steels 1469

Strengthened by Precipitates of Intermetallic Compounds

K.Okamoto, Y.Kondou, A.Yoshinari, Y.Aono, H.Kodama,Y.Iwata and T.Kato

Development of the Component Materials in Molten Carbonate 1475

Fuel Cells

Y.Fujita, T.Nishimura and A.Sasaki

(3)


Page

High Temperature Strength and Thermal Stability of a 1481

Unidirectionally Solidified Al2Oa/ Er,Al5012 Eutectic Composite

T.Wakamolo, Y.Waku, N.Nakagawa, H.Ohlsubo, K.Shimizu and Y.Kohtoku

Development of Ni-base ODS Superalloys 1487

M.Arai, K.Nishi, Y.Kondo and M.Inagaki

V-I Characteristics of Bismuth and Rare-Earth Co-doped ZnO 1493varistors

A.Hori,T.Kato, K-Kobayashi and Y.Takada

Satellite Symposium: Processing Technology and

Applications of Ceramic Martix Composite

Synthesis and Processing of Ceramic-Metal Composites by 1499

Reactive Metal Penetration

A.P.Tomsia, S.Foppiano, W.MoberlyChan and E.Saiz

Ceramic-Metal and Ceramic-Polymer Composites Prepared by 1501

Biomimetic Process

T.Kokubo, F.Miyaji, H.M.Kim, H.Takadama andT.Miyazaki

Fiber Reinforced Composites with Polymer-Derived 1503

Matrix:Processing,Microstructure and Properties

G.Ziegler and D.Sullor

Processing.Microstructure.and Properties of In-situ Reinforced 1505

SiC Matrix Composites

T.Tani

Fabrication and Thermal Stability of SiC Fiber Reinforced SiC 1507

Composites

S.Mitsuno, Y.Imai, H.Ichikawa and Y.Kagawa

Fabrication,Mechanical Properties and Microstructure Analysis 1513

in Si3N4/SiC Nanocomposites

D.S.Cheong, K.T.Hwang and C.S.Kim

Ceramic Nanocomposites with Perovskite Dispersoid 1517

T.Nagai, H.J.Hwang, M.Yasuoka, M.Sando and K.Niihara

(38)


Page

Recent Developments in Fibers and Interphases for High 1521

Temperature Ceramic Matrix Composites

R.E.Tressler

Interfacial Reactions in Aluminum Alloys/Mullite-Zirconia 1523

Composites

J.S.Moya, H.P.Steier and J.Requena

Ceramic Composites:Roles of Fiber and Interface 1525

\

J.P.Singh and D.Singh

Mechanical Interactions between Fiber and Cracked 1527

Coating Layer

S.Ochiai, M.Tanaka, I.Okumura, T.Fujita, M.Hojo and T.Inoue

Evaluating the Stability of Different BN Interface Coatings for 1529Use in SiC/SiC Composites

K.L.More, K.S.Ailey, R.AXowden, P.F.Torlorelli and H.T.Lin

Microindentation Tests as a Tool for the Estimate of Mechanical 1531

Properties and the Modeling of the Interfacial Behavior of

Ceramic Matrix Composites

M.D.Habti, K.Nakano and K.Suzuki

Functional Composites for Sensors.Actuators.and Transducers 1537

R.E.Newnham

Ceramic Composites for Thermal Protection Systems 1539

J.B.Davis, D.B.Marshall, K.S.Oka, R.M.Housley and P.E.D.Morgan

Potential Application of Ceramic Matrix Composites to 1541

Aero-Engine Components

H.Ohnabe, S.Masaki, M.Onozuka, K.Miyahara and T.Sasa

Application of Carbon-Carbon Composites to Dovetail Joint 1545

Structures

Y.Kogo, H.Halta, M.Toyoda and T.Sugibayashi

Measurement of Young's Modulus from the Impact Sound of 1551

Rectangular Bar Specimens of a Long Fiber C/C Composite with

SiC Coatings

M.Sakala, H.Ohnabe and O.O.Ochoa

(39)


Page

Influence of Heat Treatment Temperature on Interfacial Shear 1557

Strength of C/C

K.Fujita, H.Sakai, N.Iwashila and Y.Sawada

High-Density C/C Composites Manufactured with Pressurized 1563

Carbonization Process

Y.Sohda, M.Shinagawa and M.Ishii

Raman Microspectroscopy Study of a C/C Composite 1567

G. Chollon, J.Takahashi and K.Kemmochi

High Temperature Oxidation Behavior of SiC-Coated C/C 1573

Composites

T.Aoki, H.Fukuda, Y.Kogo, H.Hatta and Y.Goto

Applicability of Fracture Toughness Concept to Fracture 1579

Behavior of Carbon/Carbon Composites

H.Asano, H.Kawada, H.Hatta and Y.Kogo

Mechanical Properties of Porous Carbon-Carbon Composite 1585

U.Davies and R.D.Rawlings

Crack Deflection in Ceramic Composites and Fiber Coating 1591

Design Criteria

R.J.Kerans, T.A.Parlhasarathy and R.S.Hay

Crack Propagation and Fatigue of Zirconia Based Composites 1593

G.Fantozzi, J.Chevalier and COlagnon

Hierarchical Modeling of Smart Composites 1595

M.Taya

Micro/Minicomposites:A Useful Approach to the Design and 1597

Development of Non-Oxide CMCs

R.Naslain, J.Lamon, R.Pailler, X.Bourrat and A.Guette

A Model for the Stress-Rupture of Fiber-Reinforced Ceramic 1601

Composites With Carbon Interfaces at Intermediate Temperatures

E.L.Curzio

w


Page

Corrosion Characteristics of Ce-TZP/LBA 1603

Ceramic Composites in High Temperature and High PressureWater Environment

M.Sato, Y.Kimura, N.Hisamori and T.Fujii

Modeling of the Bundle Bridging Mechanism IN 2D SiC/C/SiC 1609

Composite Materials

M.D.Habti, J.L.Chermant and D.Rouby

Development of Test Standards for Continuous Fiber Ceramic 1615

Composites in the United States

E.L.Curzio and M.GJenkins

Polymer Derived Ceramic Matrix Composites 1617

R.Jones, A.Szweda and CPetrak

Mechanical Properties and Oxidation Resistance of C-B-Si 1621

Coated Silicon Nitride Fiber Reinforced Si-N-C Composites with

Cross-Ply Structure

K.Sato, H.Morozumi, O.Funayama andT.Isoda

Continuous Fiber CMC Fabrication Using Preimpregnated Sheets 1623

T.Tanimoto

Mechanical and Microstructural Investigation of 3-D 1627

SiC/SiC-Based Composite

I.J.Davies, T.Ishikawa, N.Suzuki, M.Shibuya and T.Hirokawa

The Environment Dependent Detrioration of Ceramic Matrix 1633

Composites

H.Hirala, H.Itoh, K.Imai, Y.Imai and S.Milsuno

Cracking Sequence of SiC Fiber Reinforced Glass Matrix 1639

Cross-Ply Laminates

N.Takeda and M.Kiriyama

Satellite Symposium: Innovations in Materials

Design-Focused on Users Viewpoints

An Integrated Data System for Electronic Structures by First 1645

Principles Calculation

Y.Chen, K.Shimura, M.Obara and S.Iwata

(41)


Student Session: Innovetions in Materials Science Pa8e

Composite Tubular Structures 1651

C,H.Ong

Development of Microstructures for Optimum Fatigue Strength of 1657

Ti-13Nb-13Zr

J.L.S.Maurer, A.Mishra, D.Eylon and T.Saliba

Processing and Characterisation of Pure Magnesium Matrix 1661

CompositesR.A.Saravanan, S.Seshan and M.K.Surappa

Energy Absorbing Behavior of Highly Porous Aluminum 1667

Y.Arai and M.Otsuka

Effect of Solidification Speed on the Isothermal Fatigue 1673

Properties of Sn-3.5mass%Ag Solder Alloy

Y.Kariya, Y.Oguchi, H.Kawamata and M.Otsuka

Isothermal Fatigue Characteristics of Sn-Ag-X(X=Bi,Zn,Cu) 1679

Solder Alloy

Y.Kariya and M.Otsuka

Pressure Welding of Light Alloys at Intermediate Temperature 1685

T.Haseyama, T.Yokota, M.Otsuka and H.Tokisue

Influence of Thermal Cycling on the Interfacial Properties of 1691

GFRP

T.Tanimoto, H.Hamada and D.Nagase

The Design and Construction of an All-Composite Solar Car 1695

T.Tanimoto, T.Suzuki, P.Kim and G.Kimura

Noched Strength of Braided Compsites 1699

E.Tanigaki, M.Masui, M.Sakaguchi, A.Nakai and H.Hamada

Flexural Behavior of Knitted Fabric Composites 1703

S.Ikegaki, K.Sugimoto, K.Kameo, M.Sakaguchi, M.Masui, A.Nakai and H.Hamada

(«)


Page

Eigenfrequency Analysis Method of Adhesive Joints of CFRP 1707Laminates

Y.Tanimolo, A.Tange, Z.Maekawa and T.Nishiwaki

Time-Temperature Dependence of S-PS Injection Moldings 1711

M.Kinoshita, T.Hasegawa, T.Semba, H.Hamada and A.Fujila

Crack Growth Behavior of GF/PP Injection Molded Composites 1715

A.Eggert, K.Chatani, K.Friedrich and H.Hamada

Time and Temperature Dependence on Tensile Fatigue Strength 1719of Unidirectional CFRP

H.Kudoh, M.Nakada and Y.Miyano

Time and Temperature Dependence on Flexural Fatigue Strength 1723of Unidirectional CFRP Laminates Using Pitch-Based CarbonFibers

N.Daicho, M.Nakada, Y.Miyano and M.Mohri

Time and Temperature Dependence on Interlaminar Fracture 1727Behavior of Unidirectional CFRP Laminates

S.Fukushima, M.Nakada, Y.Miyano and M.Mohri

Time and Temperature Dependence on Tensile Behavior of GFRP 1731

Adhesive Joints

T.Imai, M.Nakada, Y.Miyano and S.W.Tsai

Development of Flexible V-Bending Machine 1735

Y.M.Huang and H.Koyama

Influence of Ply Angle of the CFRP Angle Ply Laminates on 1739

Electrical Resistance and Thermal Distribution by Joule Heating

M.Horie, O.Haga and H.Asanuma

Bearing Strength of A/K/C Super Hybrid Material under Pin 1743

Loading

O.Imai, O.Haga and H.Koyama

Health Monitoring of a Continuous SiC Fiber Reinforced 1747

Aluminum Composite with Embedded Optical Fiber

T.Kishi and KAsanuma

(«)


Page

Fabrication of Al3Ti / Al in Situ Composites 1751

O.Yashima and H.Asanuma

Polymer Matrix Composites

Strain Response of a Thermoplastic Composite Material under 1755

Nonproportional Loading

S.C.M.Yen and C.G.Lim

challenging to advanced materials and processing ... · y.kamino, y.hirala, k.sodeyama,...

Documents