chapter-09 masonry structures under later loads siddharth shankar department of civil(structure)...
TRANSCRIPT
![Page 1: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/1.jpg)
Chapter-09Masonry Structures under
later loads Siddharth shankar
Department of Civil(structure) Engineering
Pulchowk Campus
![Page 2: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/2.jpg)
Earthquake Earthquake cause shaking of ground, so a building resting on
it will experience motion at its base. The roof has a tendency to stay in its original position and the
roof experiences a force, called inertia force. Inertia force is the multiplication of the weight and the
acceleration, so larger the weight of the building more the earthquake shaking.
Engineering representation of earthquake force
![Page 3: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/3.jpg)
Masonry Structures
Masonry is brittle and tensile and shear strength is very low.
Due to Large mass of masonry structures, heavy weight attracts large amounts of seismic forces.
Wall to wall connection and roof connection is generally weak.
Stress concentration occurs at the corners of windows and doors.
![Page 4: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/4.jpg)
Out of plane failure In plane failure Diaphragm failure Connection Failure Failure due to opening of wall Pounding Non-structural component failure
Failure Modes of a Masonry buildings
![Page 5: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/5.jpg)
Out of Plane FailureThe Earthquake force is
perpendicular to the plane.The wall tends to overturn or bend.This causes the partial or full
collapse of the wall.This is due to Inadequate anchorage
of wall and roof , long and slender wall, etc.
Characterized by vertical cracks at corner, cracks at lintel, roof level and gable wall, etc.
![Page 6: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/6.jpg)
In Plane Failure
The Earthquake force is parallel to the planeThe wall is shear off or bendX- cracks occurs Characterized by vertical cracks at wall intersection,
separation of corners of two walls, spalling of materials, etc
![Page 7: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/7.jpg)
Diaphragm Failure Lack of anchoring produce a push of diaphragm against the
wall. Absence of good shear transfer between diaphragms and
reaction wall accounts for damage at corner of wall Rare phenomenon in the event of seismic motion Separation of wall and diaphragm cause collapse of buildings
![Page 8: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/8.jpg)
Connection failure For given direction of earthquake, wall A acts as a shear
wall and B acts as flexure wall. If the walls are not tied together wall B overturn (out of
olane) and wall A slides (in plane) and collapse occurs. Masonry units should tied properly
![Page 9: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/9.jpg)
Failure due to opening in walls Opening will obstruct the flow of forces from one wall to
another. Large opening in shear wall reduces the strength of wall
against the inertia forces. Results diagonal cracks in the areas of masonry between
opening and cracks at the level of opening. Thus, openings should small and away from corners.
![Page 10: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/10.jpg)
Pounding When the roofs of two adjacent buildings are at different
levels, during earthquake, two buildings strike against each other is called pounding.
Pounding results into cracking of the wall.
![Page 11: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/11.jpg)
Non Structural components failure
Falling of plaster from walls and ceiling.Cracking and overturning of parapets,
chimneys, etc.Cracking and overturning of partition walls.Cracking of glasses.Falling of loosely placed objects.
![Page 12: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/12.jpg)
Ductile behaviour of reinforced & unreinforced masonry
It is the capacity of an element or structure to undergo large deformation without failure.
Masonry is brittle in nature. Ductility of masonry structure is governed by the ductility
of masonry units & properties of mortar. Unreinforced masonry cannot withstand tension so cracks
develops. In-plane & out-of-plane failure is also due to ductility of
masonry. To improve ductility reinforcing bars are embedded in the
masonry, called reinforced masonry which can resist the seismic force more than unreinforced masonry.
![Page 13: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/13.jpg)
Brittle and Ductile force-deformation behavior
Brittle
Ductile
Δy ΔuDeformation
![Page 14: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/14.jpg)
1. Walls tend to tear apart.
![Page 15: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/15.jpg)
2. Walls tend to shear off diagonally in direction.
![Page 16: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/16.jpg)
3. Failure at corners of walls
![Page 17: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/17.jpg)
4. Walls tend to collapse
![Page 18: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/18.jpg)
5. Failure at corners of openings
![Page 19: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/19.jpg)
6. Hammering/pounding between two adjacent buildings
![Page 20: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/20.jpg)
![Page 21: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/21.jpg)
7. Separation of thick wall into two layers
![Page 22: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/22.jpg)
8.Separation on unconnected wall at junction
![Page 23: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/23.jpg)
9.Seperation of wall from roof
![Page 24: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/24.jpg)
Non-integrity of wall floor and roof. Configuration – irregularity of building causes
torsional effect. Large opening of the building. Inappropriate position of opening. Lack of cross wall in large length of wall. Lack of reinforcement make the masonry building
brittle. Pounding effect. Lack of anchoring element between two walls.
Major causes of failure of masonry buildings
![Page 25: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/25.jpg)
Elements of Lateral Load Resisting Masonry
System
![Page 26: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/26.jpg)
Horizontal bands for integrity Connecting peripheral walls for
structural robustness and integrity Plinth band Lintel band Roof band Gable band
![Page 27: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/27.jpg)
![Page 28: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/28.jpg)
![Page 29: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/29.jpg)
![Page 30: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/30.jpg)
Roof structure
Light and strong roof is
desirable.
Secure tiles/slates or use GI
sheets.
Good jointing in trusses
Concrete floors in 1:2:4
concrete with reinforcement
in both directions and bend
up near supports.
![Page 31: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/31.jpg)
![Page 32: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/32.jpg)
Overall arrangement of masonry structure
![Page 33: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/33.jpg)
Chapter-10Testing of masonry
elements
siddharth shankarPulchowk Campus
Department of Civil Engineering
![Page 34: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/34.jpg)
Compressive Strength of Bricks and wall
![Page 35: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/35.jpg)
Testing of Wall in compression
![Page 36: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/36.jpg)
Diagonal Shear Test
![Page 37: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/37.jpg)
![Page 38: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/38.jpg)
![Page 39: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/39.jpg)
![Page 40: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/40.jpg)
Normally carried out:1. Periodically to evaluate the performance of building
2.To gather information on old building in order to ascertain the methods of repair or to demolish
3. To ascertain the strength of concrete if cube tests failed.
![Page 41: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/41.jpg)
NON DESTRUCTIVE TEST (NDT)
Elastic wave tomography Rebound Hammer / Schmidt Hammer Ultrasonic Pulse Velocity Impact Echo Test X-Rays Flat Jack Test
![Page 42: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/42.jpg)
Elastic wave tomography Technique used for locating shallow delaminations,
cracks, and voids. Elastic wave tomography is based on two basic
principles from heat transfer: conduction and radiation. Sound materials with no voids, gaps, or cracks are more thermally conductive than materials that are delaminated or contain moisture.
This allows rapid areal mapping of internal conditions. It should be noted that the IT method is most useful for the detection of shallow defects and flaws.
Tests For: Voids, Cracks, Moisture.
![Page 43: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/43.jpg)
![Page 44: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/44.jpg)
![Page 45: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/45.jpg)
![Page 46: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/46.jpg)
Rebound Method Can be used to determine the in-place compressive
strength of concrete within a range of 1500 – 8000 psi (10-55MPa)
A quick and simple mean of checking concrete uniformity.
Measure the distance of rebound of a spring-loaded plunger after it struck a smooth concrete surface.
Results of the test can be affected by factors such as smoothness of concrete surface, size, shape, rigidity of specimen, age & moisture condition.
Type of coarse aggregate & the carbonation of the surface.
![Page 47: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/47.jpg)
Nondestructive Test Re-bound hammer Method
![Page 48: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/48.jpg)
Nondestructive Test Methods Rebound Hammer Tests
Schmidt Hammer
![Page 49: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/49.jpg)
Rebound Method Using Rebound Hammer
![Page 50: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/50.jpg)
Ultrasonic Pulse Velocity It uses measurement of the speed of ultrasonic
pulses through the concrete to correlate concrete strength to standard strength.
Allows the determination of compressive concrete strength and location of cracks.
It will identify non homogenous condition in the structure such as honeycomb, voids and cracks.
Size of cracks can also be determined.
![Page 51: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/51.jpg)
Ultrasonic Pulse Velocity
![Page 52: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/52.jpg)
Flat Jack Test Flat jack testing is a nondestructive test of
evaluating existing masonry structure. It does not require removal of masonry units - only the removal of small portions of mortar is enough. The flat jack test uses small, thin, hydraulic jacks to apply a force to a section of an existing masonry wall, and the method uses measuring devices to determine the resulting displacement of the masonry.
![Page 53: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/53.jpg)
Flat jack testing has many useful applications:
It can be used to determine masonry compressive modulus, which is the stress/strain relationship of the masonry, or axial stress by applying axial load and measuring resulting axial deformation.
It can be used to estimate compressive strength and measure the shear strength.
If the destruction of the masonry units is acceptable, it can be used to directly measure the compressive strength by testing the masonry to failure.
![Page 54: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/54.jpg)
Flat-Jack Test
![Page 55: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/55.jpg)
Push Shear Test
![Page 56: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/56.jpg)
Prepare the test location by removing the brick, including the mortar, on one side of the brick to be tested. The head joint on the opposite side of the brick to be tested is also removed. Care must be exercised so that the mortar joint above or below the brick to be tested is not damaged.
The hydraulic ram is inserted in the space where the brick was removed. A steel loading block is placed between the ram and the brick to be tested so that the ram will distribute its load over the end face of the brick. The dial gauge can also be inserted in the space.
Push Shear Test
![Page 57: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/57.jpg)
The brick is then loaded with the ram until the first indication of cracking or movement of the brick.
The ram force and associated deflection on the dial gauge are recorded to develop a force-deflection plot on which the first cracking or movement should be indicated. A dial gauge can be used to calculate a rough estimate of shear stiffness
Push Shear Test
![Page 58: Chapter-09 Masonry Structures under later loads Siddharth shankar Department of Civil(structure) Engineering Pulchowk Campus](https://reader036.vdocument.in/reader036/viewer/2022062423/56649dea5503460f94ae5261/html5/thumbnails/58.jpg)