cheyenne, wyoming · cheyenne, wy 82001 t | 307.775.9970 ... model: to include but not limited to...
TRANSCRIPT
1906 Thomes Avenue Cheyenne, WY 82001 T | 307.775.9970 W | www.tdsi.us
May 11, 2016 APN: 15.3.118
Laramie County Community CollegeLaramie County Community College 2016 FURNITURE, FURNISHINGS & EQUIPMENT 2016 FURNITURE, FURNISHINGS & EQUIPMENT
FURNITURE CUTFURNITURE CUT--SHEETSSHEETS
for … PATHERFINDER BUILDINGPATHERFINDER BUILDING
Cheyenne, Wyoming
FUR
NIT
UR
E, F
UR
NIS
HIN
GS
& E
QU
IPM
ENT
FUR
NIT
UR
E C
UT-
SHEE
TS
BO
OK
CA
SES
| SH
ELV
ING
FU
RN
ITU
RE
CU
T-SH
EETS
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
B‐01
METAL BOOKCASE UNIT – 5 SHELVES Manufacturer: HON Model Number: HFSC183664W Finish: Core Paint TBD
Overview: This 5‐shelf bookcase features shelves that adjust in 2" increments for fully customizable storage. The reinforced case construction is built for durability, and the 64‐1/4"H is designed to complement desk units, lateral files and other components throughout the Office Spaces. Specifications:
Reinforced case construction for added sturdiness and stability, Shelves adjust in 2" increments to provide customizable shelf storage, Wire management grommets in the back organize cables and cords, 64‐1/4"H complements Initiate panels and Flagship heights
General:
Assembly Type: Fully Assembled Counterweight: No Gross Weight: 148.0 lbs. Lock: No Overall Depth: 18.0" Overall Height: 64.25" Overall Width: 36.0" Units Per Package: 1
Shelving:
Shelf Count: 5 Shelf Interior Depth: 17.0" Shelf Interior Width: 34.75" Shelf Type: Adjustable Shelves Adjustable: Yes
Dimensions: 18.0"D x 36.0"W x 64.25"H Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
B‐02
METAL BOOKCASE UNIT – 3 SHELVES Manufacturer: HON Model Number: HFSC183640W Finish: Core Paint TBD
Overview: This 3‐shelf bookcase features shelves that adjust in 2" increments for fully customizable storage. The reinforced case construction is built for durability, and the 39‐1/8"H is designed to complement desk units, lateral files and other components throughout the Office Spaces. Specifications:
Reinforced case construction for added sturdiness and stability, Shelves adjust in 2" increments to provide customizable shelf storage, Wire management grommets in the back organize cables and cords, 39‐1/8"H complements Initiate panels and Flagship heights
General:
Assembly Type: Fully Assembled Counterweight: No Gross Weight: 100.0 lbs. Lock: No Overall Depth: 18.0" Overall Height: 40" Overall Width: 36.0" Units Per Package: 1
Shelving:
Shelf Count: 3 Shelf Interior Depth: 17.0" Shelf Interior Width: 34.75" Shelf Type: Adjustable Shelves Adjustable: Yes
Dimensions: 18.0"D x 36.0"W x 39‐1/8"H Warranty: Full Lifetime Warranty
DES
K U
NIT
S FU
RN
ITU
RE
CU
T-SH
EETS
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
D‐01
TYPICAL OFFICE DESK AND CRENDENZA UNITS WITH MOBILE PEDESTALS Manufacturer: HON – Abode Series and Flagship Series Model: to include all component pieces for a complete unit DESK: top, sides, one full‐height modesty panel and all other components for a complete unit. CRENDENZA: top, full‐height sides, back panel ¾ height modesty and all other components for a complete unit. MOBILE PEDESTALS: Flagship Series:
BOX/BOX/FILE MOBILE H18723 FILE/FILE MOBILE H18823 BOX/BOX/FILE MOBILE H18720 FILE/FILE MOBILE H18820
Finishes: TBD Metal Core Paint Laminate Grommets / Locks
Pull Style:TBD
Construction: •End Panels: 1‐5/8” thick with all metal construction in 30”, 24”, and 11” depths. 11” depths only used for end of runs with peninsula or jetty worksurfaces. Include levelers with 3‐1/2” of adjustment and a worksurface attachment bracket. End panels are non‐handed but become handed once the levelers and worksurface attachment bracket are installed.
•Support Legs: 1‐5/8” thick with all metal construction in 30” and 24” depths. Leg portion is 12‐3/4” deep. Includes 1‐1/2” grommet for horizontal cable management, levelers with 3‐1/2” of adjustment, and a worksurface flat bracket. Support legs are used at the junction of two worksurfaces with the exception of two rectangular worksurfaces which uses a shared leg.
•Shared Legs: 2” thick welded all metal construction. Leg portion is 6‐1/2” deep with a 15‐1/2” deep foot featuring two glides with 1” of adjustment. Shared legs are used to join two rectangles at an in‐line connection or in panel systems as a freestanding, off‐modular leg.
•Corner Legs: 2‐3/8” by 2‐3/8” welded all metal construction. Attaches to modesty panels or gussets at 90o corners.
•Modesty Panels: Available in half and full height. Half height modesty panels provide 14” of clearance to the floor. Corner modesty panels are only used when attaching a corner leg to an end panel or a desk to panel attachment bracket.
•Gussets: May be substituted for 36” to 60” modesty panels to create an open desk.
Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 2
Laramie County Community CollegePathfinder Building
D‐01
TYPICAL OFFICE DESK UNIT (continued) •Bridge and Return Kits: Used when joining an end panel in‐line to a modesty panel. Modesty panel needs to be 6” longer for returns or 12” longer for bridges. Modesty panel runs to the inside of end panel creating a 1‐5/8” offset. Includes end panel to modesty panel bracket, flat bracket, and tie bracket (two of each for bridge kit). •Desk to Panel Attachment Kit: Used to attach a modesty panel to an Abound or Accelerate panel. Includes desk to panel bracket and one worksurface bracket. Corner desk to panel kits used only in place of a corner leg when attaching a corner modesty panel to an end panel. Mobile Pedestals: Flagship is metal storage collection. Construction:
Assembly Type: Fully Assembled Caster Quantity: 4 Counterweight: Yes Lock: Yes Overall Depth: 28.88" Overall Height: 28.0" Overall Width: 15.0" Overall Depth: 19.88" Overall Height: 28.0" Overall Width: 15.0"
Drawers Ability to Key‐Alike: Yes Document Size Accommodation: Letter Drawer Quantity Available: 3 and 2 Drawer Suspension ‐ Box: Ball‐Bearing Drawer Suspension ‐ File: Ball‐Bearing Hangrail: Front‐to‐Back Pull Style: TBD
Compliance: •Meets or exceeds applicable ANSI/BIFMA and ISTA Performance Standards.
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
D‐02
TYPICAL OFFICE DESK WITH RETURN AND MOBILE PEDESTALS Manufacturer: HON – Abode and Flagship Series Model: to include but not limited to the following model number for a complete desk and return unit. DESK and RETURN: top, sides, full‐height modesty panels for the desk and ¾ height for the returns and all other components for a complete unit.
MOBILE PEDESTALS: Flagship Series: BOX/BOX/FILE MOBILE H18723 BOX/BOX/FILE MOBILE H18720 FILE/FILE MOBILE H18820
Finishes: TBD Metal Core Paint Laminate Grommets / Locks
Pull Style: TBD Construction: •End Panels: 1‐5/8” thick with all metal construction in 30”, 24”, and 11” depths. 11” depths only used for end of runs with peninsula or jetty worksurfaces. Include levelers with 3‐1/2” of adjustment and a worksurface attachment bracket. End panels are non‐handed but become handed once the levelers and worksurface attachment bracket are installed.
•Support Legs: 1‐5/8” thick with all metal construction in 30” and 24” depths. Leg portion is 12‐3/4” deep. Includes 1‐1/2” grommet for horizontal cable management, levelers with 3‐1/2” of adjustment, and a worksurface flat bracket. Support legs are used at the junction of two worksurfaces with the exception of two rectangular worksurfaces which uses a shared leg.
•Shared Legs: 2” thick welded all metal construction. Leg portion is 6‐1/2” deep with a 15‐1/2” deep foot featuring two glides with 1” of adjustment. Shared legs are used to join two rectangles at an in‐line connection or in panel systems as a freestanding, off‐modular leg.
•Corner Legs: 2‐3/8” by 2‐3/8” welded all metal construction. Attaches to modesty panels or gussets at 90o corners.
•Modesty Panels: Available in half and full height. Half height modesty panels provide 14” of clearance to the floor. Corner modesty panels are only used when attaching a corner leg to an end panel or a desk to panel attachment bracket.
•Gussets: May be substituted for 36” to 60” modesty panels to create an open desk.
Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 2
Laramie County Community CollegePathfinder Building
D‐02
TYPICAL OFFICE DESK WITH RETURN AND MOBILE PEDESTALS
(continued) •Bridge and Return Kits: Used when joining an end panel in‐line to a modesty panel. Modesty panel needs to be 6” longer for returns or 12” longer for bridges. Modesty panel runs to the inside of end panel creating a 1‐5/8” offset. Includes end panel to modesty panel bracket, flat bracket, and tie bracket (two of each for bridge kit). •Desk to Panel Attachment Kit: Used to attach a modesty panel to an Abound or Accelerate panel. Includes desk to panel bracket and one worksurface bracket. Corner desk to panel kits used only in place of a corner leg when attaching a corner modesty panel to an end panel. Mobile Pedestals: Flagship is metal storage collection. Construction:
Assembly Type: Fully Assembled Caster Quantity: 4 Counterweight: Yes Lock: Yes Overall Depth: 28.88" Overall Height: 28.0" Overall Width: 15.0" Overall Depth: 19.88" Overall Height: 28.0" Overall Width: 15.0"
Drawers Ability to Key‐Alike: Yes Document Size Accommodation: Letter Drawer Quantity Available: 3 and 2 Drawer Suspension ‐ Box: Ball‐Bearing Drawer Suspension ‐ File: Ball‐Bearing Hangrail: Front‐to‐Back Pull Style: TBD
Compliance: •Meets or exceeds applicable ANSI/BIFMA and ISTA Performance Standards.
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
D‐02A
CLOSED BACK STACK‐ON HUTCH FOR DESK D‐02, FULL HEIGHT TACKBOARD, 42” TASKLIGHT AND WIRE MANAGEMENT Manufacturer: HON –38000 Series Model: HUTCH: 38000 Series include but limited to ‐ H38242N STACK ON FULL CLEARANCE HUTCH | H38247 FRONT FLIPPER DOORS |HT60 TACKBOARD |HH870960 RECESSED TASK LIGHT. Finishes: Metal Core Paint ‐ TBD Tackboard: Grade 3 Fabric ‐ TBD Overview:
Closed Back Stack‐on Hutch with Metal Painted Flipper Doors, 60” Full Height Fabric Tackboard (Grade 3/C ‐ TBD) and 42” Tasklight .
Warranty:
Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
D‐03
OFFICE U‐SHAPE DESK UNIT, BRIDGE AND CREDENZA SHELLINCLUDING MOBILE PEDESTALS Manufacturer: HON – Abode Series and Flagship Series Model: to include all component pieces for a complete unit DESK: rectangle top, full modesty panels for front and side panels and all other components for a complete unit. BRIDGE: Kit ‐ top, back ¾ modesty panels and all other components for a complete unit to connect to desk and credenza unit. CREDENZA: top, ¾” high back modesty panel, full sides modesty panels and all other components for a complete unit. MOBILE PEDESTALS: Flagship Series:
BOX/BOX/FILE MOBILE H18723 BOX/BOX/FILE MOBILE H18720 FILE/FILE MOBILE H18820
Finishes: TBD Metal Core Paint Laminate Grommets / Locks
Pull Style:TBD Construction: •End Panels: 1‐5/8” thick with all metal construction in 30”, 24”, and 11” depths. Include levelers with 3‐1/2” of adjustment and a worksurface attachment bracket. End panels are non‐handed but become handed once the levelers and worksurface attachment bracket are installed.
•Support Legs: 1‐5/8” thick with all metal construction in 30” and 24” depths. Leg portion is 12‐3/4” deep. Includes 1‐1/2” grommet for horizontal cable management, levelers with 3‐1/2” of adjustment, and a worksurface flat bracket. Support legs are used at the junction of two worksurfaces with the exception of two rectangular worksurfaces which uses a shared leg.
•Shared Legs: 2” thick welded all metal construction. Leg portion is 6‐1/2” deep with a 15‐1/2” deep foot featuring two glides with 1” of adjustment. Shared legs are used to join two rectangles at an in‐line connection or in panel systems as a freestanding, off‐modular leg.
•Corner Legs: 2‐3/8” by 2‐3/8” welded all metal construction. Attaches to modesty panels or gussets at 90o corners.
•Modesty Panels: Available in half and full height. Half height modesty panels provide 14” of clearance to the floor. Corner modesty panels are only used when attaching a corner leg to an end panel or a desk to panel attachment bracket.
•Gussets: May be substituted for 36” to 60” modesty panels to create an open desk.
Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 2
Laramie County Community CollegePathfinder Building
D‐03
OFFICE U‐SHAPE DESK UNIT (continued)
•Bridge and Return Kits: Used when joining an end panel in‐line to a modesty panel. Modesty panel needs to be 6” longer for returns or 12” longer for bridges. Modesty panel runs to the inside of end panel creating a 1‐5/8” offset. Includes end panel to modesty panel bracket, flat bracket, and tie bracket (two of each for bridge kit). Mobile Pedestals: Flagship is metal storage collection. Construction:
Assembly Type: Fully Assembled Caster Quantity: 4 Counterweight: Yes Lock: Yes Overall Depth: 28.88" Overall Height: 28.0" Overall Width: 15.0" Overall Depth: 19.88" Overall Height: 28.0" Overall Width: 15.0"
Drawers Ability to Key‐Alike: Yes Document Size Accommodation: Letter Drawer Quantity Available: 3 and 2 Drawer Suspension ‐ Box: Ball‐Bearing Drawer Suspension ‐ File: Ball‐Bearing Hangrail: Front‐to‐Back Pull Style: TBD
Compliance: •Meets or exceeds applicable ANSI/BIFMA and ISTA Performance Standards.
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
D‐04
DESK SHELL – 24” x 48” Manufacturer: HON – Abode Series Model: to include but not limited to the following components for a complete small desk unit: T‐Mold Edge Worksurface 24x48 HWR2448T, End Panels HSDEP2429F and Desk Front Full‐Height Modesty Panel HSDMP469 Finishes: TBD Metal Core Paint Laminate Grommets Construction: •End Panels: 1‐5/8” thick with all metal construction in 30”, 24”, and 11” depths. 11” depths only used for end of runs with peninsula or jetty worksurfaces. Include levelers with 3‐1/2” of adjustment and a worksurface attachment bracket. End panels are non‐handed but become handed once the levelers and worksurface attachment bracket are installed.
•Support Legs: 1‐5/8” thick with all metal construction in 30” and 24” depths. Leg portion is 12‐3/4” deep. Includes 1‐1/2” grommet for horizontal cable management, levelers with 3‐1/2” of adjustment, and a worksurface flat bracket. Support legs are used at the junction of two worksurfaces with the exception of two rectangular worksurfaces which uses a shared leg.
•Shared Legs: 2” thick welded all metal construction. Leg portion is 6‐1/2” deep with a 15‐1/2” deep foot featuring two glides with 1” of adjustment. Shared legs are used to join two rectangles at an in‐line connection or in panel systems as a freestanding, off‐modular leg.
•Corner Legs: 2‐3/8” by 2‐3/8” welded all metal construction. Attaches to modesty panels or gussets at 90o corners.
•Modesty Panels: Available in half and full height. Half height modesty panels provide 14” of clearance to the floor. Corner modesty panels are only used when attaching a corner leg to an end panel or a desk to panel attachment bracket.
•Gussets: May be substituted for 36” to 60” modesty panels to create an open desk.
Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
D‐05
STUDENT TESTING CARRELSManufacturer: Smith System Model: 26682 (starters only) Finishes: TBD Specifications: Focusing on studying can be a challenge for students of all ages. Library carrels can be a great solution to this problem and are perfect for libraries or testing areas. By just reversing the back panel you can switch from desk height to kiosk height or ADA. Materials: The 1 1/4” thick work surface consists of 45 lb. density particle board core with a .030” high‐pressure laminated surface and a .020” melamine backer sheet. The work surface is finished on the edge with a t‐mold edge of your choice that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre‐drilled for ease of installation. The 1 1/4” thick side panels consist of the same 45 lb. density particle board core, .030“ high‐pressure laminate on both sides and the edge is wrapped with t‐mold. The side panels are finished with a 16‐gauge 1 3/4” x 2“ steel foot with nylon end caps and feature 1” adjustable leveling glides that provide stability on uneven floors. The back panel is an 18‐gauge steel panel and is reversible to allow the user to set their work surface at either a 28” desk height for sitting or a 36” kiosk height for standing. For added strength the side panels are tied together with a 14‐gauge steel tube cross bar at the foot. EDGE PROFILE: Choice 1 – 1‐1/4” top with Bumper T‐Mold.
Dimensions: 27”D x 36”W x 48”H (for ADA heights set top of worksurface at 34”) Warranty: Limited 12 Year Warranty with Lifetime Frame Warranty with normal wear and tear.
EQU
IPM
ENT
FUR
NIT
UR
E C
UT-
SHEE
TS
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
E‐01
CHAIR CART FOR (S‐05 AND S‐06 SEATING) Manufacturer: KI Model: Armless Chair Dolly (PRY.D.BL) Finish: Standard Specifications: Powder‐Coated Finish Electrostatically‐applied epoxy baked onto surface. Tubular and plate steel welded together, 5” casters: two swivel, two fixed. Black powder‐coated finish. Stacking on Dolly: Maximum Stack Quantities and Height on Dolly
Polypropylene seat with Arms, 12 Chairs / 67" High
Stacking Armless Upholstered seat, no cushion, 25 Chairs / 79" High
Stacking on Floor
Width 20" Armless Stacking Chair x Depth 35"
Width 23‐1/2" Stacking Armchair x Depth 35"
Quantity:
Armless Stacking ‐ Height 8 Chairs / 44" High
Stacking Armchair ‐ High 6 Chairs / 45" High
Dimensions:
24”W x 25‐1/2”D x 19‐1/2”H
Warranty:
Warranted for ten years
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
E‐02
VERTICAL STORAGE TABLE CADDYFOR: T‐04 ‐ 66” FOLDING TABLES AND T‐12 ‐ 24” X 60” RECTANGLE TABLES Manufacturer: Mitylite Model: CT Cart ‐ Small Finish: Standard
Overview: The CT Cart – Small is designed to hold up to 20 round tables stacked on edge. A handle is provided at the swivel caster end of the cart allowing the user to steer the cart. The middle support bar is provided to separate the tables into two sections holding 10 tables in each section up on edge. Features:
Durable powder coated steel frame Easy to handle, move & store Non‐marring wheels & casters Holds 10 ‐ 20 tables
Dimensions:
Width: 26.5" (67cm) Length:67" (170cm) Height: 39" (99cm) Weight: 79 lbs (36kg)
Warranty:
Warranted for twelve years
FILI
NG
AN
D S
TOR
AG
E U
NIT
S FU
RN
ITU
RE
CU
T-SH
EETS
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
F‐01
Lateral Filing Options:
Side‐to‐side filing:
36” wide files: 33” of filing with letter or legal.
Front‐to‐back filing:
36” wide files: 30 ½” filing with letter/letter,
legal/legal, or letter/legal rows.
Combination filing:
(front‐to‐back with side‐to‐side in one drawer)
36” wide files: 15 ¼” of front‐to‐back letter filing
and 20 ¼” of side‐to‐side legal filing
2 DRAWERS X 36” WIDE LATERAL FILE Manufacturer: HON, Flagship Series Model: H9180R Finish: TBD Core Paint Overview: Flagship Lateral Files are telescoping suspension files with full depth drawers, available in 30”, 36” and 42” widths and 2, 3, 4 or 5 drawer configurations. Two drawer models shall be standard 28” height. Drawers accommodate letter, legal and A4 sized filing. Construction: Cold rolled steel construction features bends and forming throughout components to add strength where needed for a robust construction. •Welded case construction with welded seam on top and bottom front corners. •Fully enclosed bottom includes a base stiffener for improved case rigidity is glued and welded into case assembly. •Front and rear vertical uprights are welded into case. •Four and five drawer units include an interior horizontal crosspiece. A shelf filler is installed when there is no posting shelf. •Knockouts are present in top of cabinets for ganging units side to side or back to back, 1 per side and 2 on the back. Hardware is provided. Counterweight: Included on 2, 3 and 4 drawer models to meet ANSI/BIFMA stability requirements. Locks:
Included on all models, polished chrome face cam locks are core
removable with the ability to key alike. Lock activates a steel rod that
in turn operates segmented lock/interlock bars on both sides of the
cabinet and secures both sides of the drawer or receding door. Two
keys per lock are supplied.
Finish: Steel parts are finished with baked enamel over a rust‐ inhibiting phosphate pre‐treatment. Drawer suspension: 3‐part telescoping heavy‐duty ball bearing slides with full drawer extension on all drawers and roll‐out shelves. Include: Side‐to‐Side and Front‐to‐Back filing option hanging rails. Hardware Pull shall be ‘R’ – Full Radius Pull. Compliance: Meets or exceeds applicable ANSI/BIFMA and ISTA Standards. Certified SCS Indoor Advantage™ Gold
Dimensions: 36” Deep x 18” Wide x 28” High Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
F‐02
METAL STORAGE CABINET 64‐1/4”H Manufacturer: HON, Flagship Series Model: HFSC183664R Finishes: TBD – Core Paint Features:
Flagship Storage Cabinets shall be 36” wide cabinets with full height
doors, available in five shelf heights. Shelves are adjustable in 2”
increments utilizing two 11 5/16” front‐to‐back shelf brackets per
shelf. A 1 ¼ ” diameter grommet is positioned in back of unit,
centered and at a 28 ¾” height from floor for cable management.
Construction:
Cold rolled steel construction features bends and forming throughout
components to add strength where needed for a robust construction.
•Welded case construction with welded seam on top and bottom
front corners.
•Fully enclosed bottom includes base stiffener for improved case
rigidity is glued and welded into case assembly.
•Front and rear vertical uprights are welded into case.
•Inner wall is attached to vertical uprights with six screws.
•Storage area doors have welded stiffeners for added rigidity.
•Knockouts are present in top of cabinets for ganging units side to
side or back to back, 1 per side and 2 on the back. Hardware is
provided.
Locks:
Included on storage cabinet models, polished chrome face cam locks
are core removable with the ability to key alike. Lock operates
vertical lockbars that engage both the top and bottom of right hand
door, which secures the left door. Two keys per lock are supplied.
Finish: Steel parts are finished with a baked enamel over a rust‐ inhibiting phosphate pre‐treatment.
Hardware:
‘R’ – Full Radius Pull Storage door hinges are 110° swing, nickel plated. Storage doors have rubber closing bumpers, top and bottom. Hardware to gang units together is provided, and consists of two ¼‐20 x ½“ screws and two ¼‐20 nuts. Glides:
Four leveling glides constructed of black nylon with 5 threads
per inch are accessible from inside the cabinet, adjustable with
a 3/8” 6‐point socket wrench. There is 1 1/8” adjustment and
glides are shipped installed.
Compliance: Meets or exceeds applicable ANSI/BIFMA and ISTA Standards. Certified SCS Indoor Advantage™ Gold
Dimensions: 36” Deep x 18” Wide x 64‐1/4” High Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
F‐03
Lateral Filing Options:
Side‐to‐side filing:
36” wide files: 33” of filing with letter or legal.
Front‐to‐back filing:
36” wide files: 30 ½” filing with letter/letter,
legal/legal, or letter/legal rows.
Combination filing:
(front‐to‐back with side‐to‐side in one drawer)
36” wide files: 15 ¼” of front‐to‐back letter filing
and 20 ¼” of side‐to‐side legal filing
4 DRAWERS X 36” WIDE LATERAL FILE Manufacturer: HON, Flagship Series Model: H9184R Finish: TBD – Core Paint Overview: Flagship Lateral Files are telescoping suspension files with full depth drawers, available in 30”, 36” and 42” widths and 2, 3, 4 or 5 drawer configurations. Two drawer models shall be standard 28” height. Drawers accommodate letter, legal and A4 sized filing. Construction: Cold rolled steel construction features bends and forming throughout components to add strength where needed for a robust construction. •Welded case construction with welded seam on top and bottom front corners. •Fully enclosed bottom includes a base stiffener for improved case rigidity is glued and welded into case assembly. •Front and rear vertical uprights are welded into case. •Four and five drawer units include an interior horizontal crosspiece. A shelf filler is installed when there is no posting shelf. •Knockouts are present in top of cabinets for ganging units side to side or back to back, 1 per side and 2 on the back. Hardware is provided. Counterweight: Included on 2, 3 and 4 drawer models to meet ANSI/BIFMA stability requirements. Locks:
Included on all models, polished chrome face cam locks are core
removable with the ability to key alike. Lock activates a steel rod that
in turn operates segmented lock/interlock bars on both sides of the
cabinet and secures both sides of the drawer or receding door. Two
keys per lock are supplied.
Finish: Steel parts are finished with baked enamel over a rust‐ inhibiting phosphate pre‐treatment. Drawer suspension: 3‐part telescoping heavy‐duty ball bearing slides with full drawer extension on all drawers and roll‐out shelves. Include: Side‐to‐Side and Front‐to‐Back filing option hanging rails. Hardware Pull shall be ‘R’ – Full Radius Pull. Compliance: Meets or exceeds applicable ANSI/BIFMA and ISTA Standards. Certified SCS Indoor Advantage™ Gold
Dimensions: 36” Deep x 18” Wide x 52‐1/2” High Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
F‐04
Lateral Filing Options:
Side‐to‐side filing:
36” wide files: 33” of filing with letter or legal.
Front‐to‐back filing:
36” wide files: 30 ½” filing with letter/letter,
legal/legal, or letter/legal rows.
Combination filing:
(front‐to‐back with side‐to‐side in one drawer)
36” wide files: 15 ¼” of front‐to‐back letter filing
and 20 ¼” of side‐to‐side legal filing
3 DRAWERS X 36” WIDE LATERAL FILE Manufacturer: HON, Flagship Series Model: H9183R Finish: TBD ‐ Core Paint Overview: Flagship Lateral Files are telescoping suspension files with full depth drawers, available in 30”, 36” and 42” widths and 2, 3, 4 or 5 drawer configurations. Two drawer models shall be standard 28” height. Drawers accommodate letter, legal and A4 sized filing. Construction: Cold rolled steel construction features bends and forming throughout components to add strength where needed for a robust construction. •Welded case construction with welded seam on top and bottom front corners. •Fully enclosed bottom includes a base stiffener for improved case rigidity is glued and welded into case assembly. •Front and rear vertical uprights are welded into case. •Four and five drawer units include an interior horizontal crosspiece. A shelf filler is installed when there is no posting shelf. •Knockouts are present in top of cabinets for ganging units side to side or back to back, 1 per side and 2 on the back. Hardware is provided. Counterweight: Included on 2, 3 and 4 drawer models to meet ANSI/BIFMA stability requirements. Locks:
Included on all models, polished chrome face cam locks are core
removable with the ability to key alike. Lock activates a steel rod that
in turn operates segmented lock/interlock bars on both sides of the
cabinet and secures both sides of the drawer or receding door. Two
keys per lock are supplied.
Finish: Steel parts are finished with baked enamel over a rust‐ inhibiting phosphate pre‐treatment. Drawer suspension: 3‐part telescoping heavy‐duty ball bearing slides with full drawer extension on all drawers and roll‐out shelves. Include: Side‐to‐Side and Front‐to‐Back filing option hanging rails. Hardware Pull shall be ‘R’ – Full Radius Pull. Compliance: Meets or exceeds applicable ANSI/BIFMA and ISTA Standards. Certified SCS Indoor Advantage™ Gold
Dimensions: 36” Deep x 18” Wide x 39” High Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
F‐05
BOX / BOX / FILE MOBILE PEDESTALS Manufacturer: HON, Flagship Series Model: H16720 – BOX/BOX/FILE MOBILE Finishes: TBD Metal Core Paint
Pull Style: TBD Overview: Mobile Pedestals: Flagship is metal storage collection. It’s versatile, with laterals, pedestals, and towers. Many pulls and colors offer variety. And no one has better value. In lab tests, Flagship outperforms many higher‐priced files. You can rely on Flagship. Specifications / Construction:
Assembly Type: Fully Assembled Caster Quantity: 4 Counterweight: Yes Gross Weight: 84.0 lbs. Lock: Yes Ability to Key‐Alike: Yes Document Size Accommodation: Letter Drawer Quantity Available: 3 Drawer Suspension ‐ Box: Ball‐Bearing Hangrail: Front‐to‐Back Pull Style: Arch Overall Depth: 19‐7/8" Overall Height: 26‐7/8" Overall Width: 15.0"
Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
F‐06
FILE / FILE MOBILE PEDESTALSManufacturer: HON, Flagship Series Model: H16820 – FILE / FILE MOBILE Finishes: TBD Metal Core Paint
Pull Style: TBD Overview: Mobile Pedestals: Flagship is metal storage collection. It’s versatile, with laterals, pedestals, and towers. Many pulls and colors offer variety. And no one has better value. In lab tests, Flagship outperforms many higher‐priced files. You can rely on Flagship. Specifications / Construction:
Assembly Type: Fully Assembled Caster Quantity: 4 Counterweight: Yes Gross Weight: 84.0 lbs. Lock: Yes Ability to Key‐Alike: Yes Document Size Accommodation: Letter Drawer Quantity Available: 2 Drawer Suspension ‐ Box: Ball‐Bearing Hangrail: Front‐to‐Back Pull Style: Arch Overall Depth: 19‐7/8" Overall Height: 26‐7/8" Overall Width: 15.0"
Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
F‐07
LATERAL FILES WITH STORAGE & HINGED DOORS Manufacturer: HON, Flagship Series Model: H9185LS Finish: TBD ‐ Core Paint Overview: Flagship Lateral Files are telescoping suspension files with full depth drawers, available in 30”, 36” and 42” widths and 2, 3, 4 or 5 drawer configurations. Drawers accommodate letter, legal and A4 sized filing. Construction: Cold rolled steel construction features bends and forming throughout components to add strength where needed for a robust construction. •Welded case construction with welded seam on top and bottom front corners. •Fully enclosed bottom includes a base stiffener for improved case rigidity is glued and welded into case assembly. •Front and rear vertical uprights are welded into case. •Four and five drawer units include an interior horizontal crosspiece. A shelf filler is installed when there is no posting shelf. •Knockouts are present in top of cabinets for ganging units side to side or back to back, 1 per side and 2 on the back. Hardware is provided. Counterweight: Included on 2, 3 and 4 drawer models to meet ANSI/BIFMA stability requirements. Locks:
Included on all models, polished chrome face cam locks are core
removable with the ability to key alike. Lock activates a steel rod that
in turn operates segmented lock/interlock bars on both sides of the
cabinet and secures both sides of the drawer or receding door. Two
keys per lock are supplied.
Finish: Steel parts are finished with baked enamel over a rust inhibiting phosphate pre‐treatment. Drawer suspension: 3‐part telescoping heavy‐duty ball bearing slides with full drawer extension on all drawers and roll‐out shelves. Include: Side‐to‐Side and Front‐to‐Back filing option hanging rails. Hardware Pull shall be ‘R’ – Full Radius Pull. Compliance: Meets or exceeds applicable ANSI/BIFMA and ISTA Standards. Certified SCS Indoor Advantage™ Gold
Dimensions: 18”D x 36”W x 64.25”H Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
F‐08
CREDENZA WITH LAMINATED TOP, SHELVING WITH HINGED DOORS AND LATERAL FILES Manufacturer: HON, Flagship Series Model: HFC1830DD, H9180, H919466‐TOP Finish: TBD ‐ Core Paint and Laminate Top Overview: Flagship Lateral Files are telescoping suspension files with full depth drawers, available in 30”, 36” and 42” widths and 2, 3, 4 or 5 drawer configurations. Drawers accommodate letter, legal and A4 sized filing. Construction: Cold rolled steel construction features bends and forming throughout components to add strength where needed for a robust construction. •Welded case construction with welded seam on top and bottom front corners. •Fully enclosed bottom includes a base stiffener for improved case rigidity is glued and welded into case assembly. •Front and rear vertical uprights are welded into case. •Four and five drawer units include an interior horizontal crosspiece. A shelf filler is installed when there is no posting shelf. •Knockouts are present in top of cabinets for ganging units side to side or back to back, 1 per side and 2 on the back. Hardware is provided. Counterweight: Included on 2, 3 and 4 drawer models to meet ANSI/BIFMA stability requirements. Locks:
Included on all models, polished chrome face cam locks are core
removable with the ability to key alike. Lock activates a steel rod that
in turn operates segmented lock/interlock bars on both sides of the
cabinet and secures both sides of the drawer or receding door. Two
keys per lock are supplied.
Finish: Steel parts are finished with baked enamel over a rust inhibiting phosphate pre‐treatment. Drawer suspension: 3‐part telescoping heavy‐duty ball bearing slides with full drawer extension on all drawers and roll‐out shelves. Include: Side‐to‐Side and Front‐to‐Back filing option hanging rails. Hardware Pull shall be ‘R’ – Full Radius Pull. Compliance: Meets or exceeds applicable ANSI/BIFMA and ISTA Standards. Certified SCS Indoor Advantage™ Gold
Dimensions: 18”D x 66”W x 30”H Warranty: Full Lifetime Warranty
PAN
ELS
AN
D S
YST
EM C
OM
PON
ENTS
FU
RN
ITU
RE
CU
T-SH
EETS
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
P‐01 & P‐02
PANELS, SYSTEMS FURNITURE AND COMPONENTS Manufacturer: HON, Accelerate Panel System Components as needed for a complete installation. Refer to drawings for configuration and panel sizes, etc. Finish: Panel Fabrics / Laminates / Metal Core Paints ‐ TBD Construction: Construction of the panel consists of a welded 16 gauge tubular steel frame. Steel channels are welded to the frame to allow for fabric to be tucked around the edges of the panel. Tackable panels receive an inner core of 15/8" thick hexacomb with ¼" thick 2 lb density fiberglass. Non‐tackable panels feature ¼" hardboard instead of hexacomb and fiberglass.
Two glides are included with each panel. Leveling glides provide 1 ½" adjustment and have a 5/16‐18 threaded zinc plated stem with a black plastic molded 1 ½" diameter base, and incorporate a 7/8" hex for adjustment purposes. The top cap is painted 22 gauge steel and snaps into place over the connecting brackets. The 20 gauge painted steel baserail covers encompass the bottom 4" of the panel sides. The slots of the baserail covers affix to the tabs at the bottom of the glide towers and snap into place at the top of each glide tower. All aluminum and steel show surfaces are finished with powder coat paint in the specified color. The steel slotted verticals of the panel are painted with reclaim powder. Actual Dimensions: Available in heights of 35”, 42½ ”, 50”, and 65”. 80” high panels can be accomplished with a 65” panel and a 15” stacker. Actual height of panel is a minimum of ¾” shorter than nominal height and varies depending on the position of the leveling glides. Width and thickness match nominal dimensions. Connectors: 2¼” square connectors allow for in‐line extended straight, 90° ‘L’, 3‐way ‘T’, or 4‐way ‘X’ connections, and are ordered separately. Constructed of extruded aluminum, connectors are finished with a powder coat paint in the specified color. Slots are included down the length of each post for use with stackers and holes are included for use with variable height connections. Connectors are available in six heights: 35", 42½", 50", 57½”, 65" and 80" and should be specified to match the tallest panel at a panel intersection. The included powder coat painted zinc top cap presses into the top of the connector post, and has windows that can be broken out for various configurations. An included bracket joins connector posts to the panels by press‐fit over the edges of the post and vertical steel tube portion of the panel, and is secured to the top of the panel with two #10–¾” screws.
Dimensions: Reference drawings for layout and configurations Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 2
Laramie County Community CollegePathfinder Building
P‐01 & P‐02
(A) (B) (C)
(D)
PANELS, SYSTEMS FURNITURE AND COMPONENTS Finished End Cover (A): The end cover is used to finish the end of a panel run and enclose the end of the raceway. The assembly consists of an extruded aluminum cover, up to three plastic connector clips (D), and a zinc end transition bracket. The zinc end transition cover is screwed onto the top of the panel. The cover is then held into position by screwing connector clips onto the panel with 3/4” screws, and snapping the cover into position. In‐line Panel Variable Height Kit (B): This kit is used to finish the end of a panel at a variable height connection. The assembly consists of an unpainted zinc bracket, an extruded aluminum cover, up to three plastic connector clips (D), and a zinc end transition cover. The zinc end transition cover is screwed onto the top of the panel with two #10 – ¾” screws. The cover is then held into position by screwing connector clips onto the panel with ¾” screws, and snapping the cover into position. Connector Variable Height Finishing Kit (C): This kit is used to finish the side of a connector post at a variable height connection. The assembly consists of an unpainted zinc bracket, an extruded aluminum cover, an extruded plastic connector, and a zinc end transition. . The zinc end transition cover is screwed onto the top of the panel with two #10 – ¾” screws. The cover is held into position by screwing the plastic connector onto the post, and snapping the cover into position. The end transition trim piece breaks from the bracket and is pressed into the extrusion. In‐line Panel Connector: This kit joins two panels in an in‐line configuration. It includes the in‐line bracket, four #10‐¾" screws, and 1 glide tower screw. The bracket joins the panels by press fit over the edges of the steel tubes. It is secured to the panels with two #10‐ ¾" screws in each panel. Wall Starter Kit: Kit is for panels only and is used to start a panel run from a wall. Wall starter adds 7/8" to the length of the panel run. Constructed of extruded aluminum with a powder coat paint finish in the specified color. Available in 35", 42½", 50", 57½”, 65" and 80" sizes. Attachment holes are 7/32” in diameter and are located in 10" increments. Electrical: Panel baserails have integrated receptacle knockouts that must be removed in positions needed for electrical, wire and data management components. Replacement duplex covers are available only in Black, Muslin or Shadow. Openings are 25/8" W x 15/16" H. There are two openings on each side of the panel, with the exception of 24" wide panels, which are standard with one per panel side and the 20" wide panel, which does not have an opening. The center of each opening is 12" from the end of the panel. Baserail is 2” x 4¼” overall.Electrical components are UL listed and CSA certified. Duplex receptacles must be ordered separately for all receptacle openings to be utilized. There is a maximum 13 duplexes to a circuit. Electrical / Data source from the floor.
SEA
TIN
G
FUR
NIT
UR
E C
UT-
SHEE
TS
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐01
STUDENT CLASSROOM SEATING Manufacturer: HON Model: HMN2, Upholstered Seat, Mesh Back, Armless and Carpet Casters Finishes: TBD
Seat Fabric Grade 3 ‐ TBD Mesh Back: TBD Frame/Shell: TBD
Overview: The Motivate collection provides comfort, flexibility, technology and quality they need to get things done.
Seating platform evolved from extensive ergonomic research to dramatically reduce pressure points
Designed for multi‐user environments where the use of space is constantly changing
Dynamic flex‐zone seat and back motion provides all‐day comfort for extended meetings and computer work
Molded shell features reinforced resin for flexibility and strength to withstand heavy use and frequent handling
Breathable ilira‐stretch knit back conforms to the spine
Fiber‐reinforced plastic shell is easy to clean
Polyester fabric features Nano‐Tex soil and stain repellant technology
Flip‐up seat allows these chairs to stored easily when not in use
Chairs stack up to four high on the floor Specifications: General ‐
Assembly Type: Fully Assembled Gross Weight: 27.0 lbs. Overall Depth: 23.13" Overall Height: 34.0" Overall Width: 26.75" Stacking Function: Nesting/Stacking Units per package: 1 User Weight Capacity: 300.0 lbs.
Chair Back Back Type: Guest Back Width: 19.5" Lumbar Support: Yes
Chair Seat Seat Depth ‐ Useable: 17.0" Seat Overall Depth: 17.0" Seat Width: 17.5"
Chair Base Caster Quantity: 4
Warranty: Warranted for users up to 300 lbs. Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐02
WOOD CAP ARM LOUNGE SEATING Manufacturer: Integra, Rendezvous Wood Cap Chair Model: Item: RW‐1 / Wood Cap Arm Finishes: TBD
Fabrics: COM: 5 yards Contrasting Fabrics Upholstery
2 Colors ‐ Fabric Grade: Crypton Fabrics ‐ TBD
Wood Legs / Caps: TBD
Specifications: Standard Options: Tablet Arm (300 lb capacity) Higher Back (at 18"H) Arms Contrasting Upholstery Arm Caps Recessed Pull Wood Base Brushed Aluminum Nave Leg Weighted Moisture Barrier TB133 (Fire Barrier) Tamper‐proof Fasteners Combination Fabrics Hard Maple or White Oak ‐ TBD Features: Replaceable Components Steel Inner Construction Dymetrol Suspension Sustainable Materials used in frames Solid Hard Wood Feet Blanket‐wrapped shipping (no cardboard packaging waste)
Dimensions:
w: 33 sw: 21
d: 32 sd: 20
h: 32 sh: 18.5
ah: 24 bh: 16
Warranty: Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐03
HIGH‐BACK CONFERENCE CHAIR Manufacturer: HON, Endorse Collection Model: HLEU, W5, P Fixed Arms, H Casters, PA Polished Aluminum Base Fabric: L – Leather – TBD Special Features:
Pneumatic Height Adjustment
Lumbar Adjustment
Tilt Lock (Available on Y1, Y2, and Y3 Controls)
Tilt Lock/Limiter (Available on W5 Control)
Telescoping Tilt Tension Knob (Available on Y2 and Y3 Controls)
Front Tilt Tension Adjustment (Y1 Control)
Tension Range Preference Setting (W5 Control)
Seat Depth Adjustment (Available on Y2, Y3, and W5 Controls)
Independent Back Angle Adjustment (Y3 Control only) Construction: Caster: Black open wheeled 2‐1/2" diameter dual wheel. Optional Caster: See List Pricer. Base: Black 5 leg injection molded plastic, or Polished 5 leg cast aluminum. Control: Black heavy gauge steel, Seat Glide, Swivel, Tilt Lock, Tilt Lock/ Limiter, Synchro‐Tilt, 17‐4 taper. Seat: 5/8" thick, Composite Wood Product, 2‐15/16" Thick Polyurethane Foam Cushion. Back: 0.45" thick Compression Molded Plastic Back with Adjustable Lumbar and 1‐5/32"Thick Polyurethane Foam Cushion. Arm: "P" Fixed Arm with Polished Aluminum Upright and Soft Polyurethane Pad Customer own material (COM) required yardage per SKU = 2.0 yards. Shipped: Knocked down, requires assembling of seat and back assembly to cylinder and base. Shipping Size: 41" wide x 29" deep x 23‐1/4" high (16.0 cubic feet). Flammability Rating: Furnished upon request by The HON Company Customer Service. Models HLEU meets the State of California Department of Consumer Affairs Technical Bulletin 117 Requirements. Models HLEUFC meets the State of California Department of Consumer Affairs Technical Bulletin 133 Requirements.
Dimensions: Maximum: 28‐1/2” D x 28‐1/2”W x 47‐3/4”H Seat: 15‐3/4”D x 19‐3/4”W Back: 21‐5/8”W x 29‐3/4”H Between Arms: 17‐1/2” – 20‐1/2” Seat to Floor: 16‐5/8” – 22” Usable Seat Depth: 15‐3/4”D Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐04
WORKSTOOLS Manufacturer: Office Master Model: WS23, Casters for hard surfaces Finishes: TBD Overview: Workstools shouldn't require so much attention that adjusting them becomes a job unto itself. Office Master's low‐maintenance, easy‐to‐clean and affordable work stools are the perfect solution for any industrial workplace or specialty application. With a molded polyurethane backrest and 20" footring.
Dimensions:
Overall Width : 25" Overall Height : 35‐45" Back : 15.5"w x 12.5"h Seat : 17"w x 16"d Seat Height : 21‐31"
Warranty:
Warranted for seven years
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐05
UPHOLSTERED ARMLESS STACKING CHAIR Manufacturer: KI Model: PRYU Fabric and Cushioned – Grade 3 on Seats and Back, Fabric: TBD
Overview: Perry(r) stack chairs offer surprising comfort in a high‐density stack
chair. Designed by renowned sculptor, architect and designer Charles
Perry, the stack chair offers an articulating back. The seat is suspended
from the lower back, so the occupant's weight perfectly
counterbalances the tilting pressure on the backrest. This Perry model
is armless, cushioned and upholstered.
Specifications:
Plastic Chair Seats and Backrests: Injection‐molded polypropylene. Seat is one piece screwed to frame. Backrest has two sections which form a snap‐fit and are then screwed together. Chair seats have two die‐formed 7‐gauge straps welded to side frames. Chair Frame: Armless version has 7/16” o.d. solid steel rod welded into a one‐piece unit. Armchair version has 7/16” o.d. steel rod and 5/8” steel tubing welded into a one‐piece unit. Seats have two die‐formed 7‐gauge straps welded to side frames. Bright duplex nickel chrome plated or painted finish. Back Articulation: Articulation is achieved with a single‐piece frame which flexes as the back pivots around its upper and lower crossbars. The seat is hung from the lower back so that the user’s weight perfectly counterbalances the tilting pressure of the upper back. Polypropylene Arm: Injection‐molded polypropylene. Two‐piece arm is joined by screws to encapsulate the frame. Arm is integral to frame. Stacking Bumpers: Integral parts of the frame, the bumpers are welded to the lower front frame radius. Two scuff protectors will be glued to the rear crossbrace of the chair to prevent scuffing of seat wires when chairs are stacked. Bright Chrome Finish: Surfaces are duplex nickel‐chrome plated in a twenty‐two step process.
Dimensions: Overall: 19‐1/2”W X 21‐1/2”D X 32‐1/2”H Seat: 18‐1/4”W X 17‐1/2”D X 18”H Warranty: Warranted for ten years
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐06
ARMLESS STACKING, POLYPROPYLENE CHAIR Manufacturer: KI Model: PRYP Finish: Shell TBD
Overview: Perry(r) stack chairs offer surprising comfort in a high‐density stack
chair. Designed by renowned sculptor, architect and designer Charles
Perry, the stack chair offers an articulating back. The seat is
suspended from the lower back, so the occupant's weight perfectly
counterbalances the tilting pressure on the backrest. This Perry
model is armless, non‐upholstered.
Specifications:
Plastic Chair Seats and Backrests: Injection‐molded polypropylene. Seat is one piece screwed to frame. Backrest has two sections which form a snap‐fit and are then screwed together. Chair seats have two die‐formed 7‐gauge straps welded to side frames. Chair Frame: Armless version has 7/16” o.d. solid steel rod welded into a one‐piece unit. Armchair version has 7/16” o.d. steel rod and 5/8” steel tubing welded into a one‐piece unit. Seats have two die‐formed 7‐gauge straps welded to side frames. Bright duplex nickel chrome plated or painted finish. Back Articulation: Articulation is achieved with a single‐piece frame which flexes as the back pivots around its upper and lower crossbars. The seat is hung from the lower back so that the user’s weight perfectly counterbalances the tilting pressure of the upper back. Stacking Bumpers: Integral parts of the frame, the bumpers are welded to the lower front frame radius. Two scuff protectors will be glued to the rear crossbrace of the chair to prevent scuffing of seat wires when chairs are stacked. Bright Chrome Finish: Surfaces are duplex nickel‐chrome plated in a twenty‐two step process.
Dimensions: Overall: 19‐1/2”W X 21‐1/2”D X 32‐1/2”H Seat: 18‐1/4”W X 17‐1/2”D X 18”H Warranty: Warranted for ten years
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐07
OFFICE SIDE CHAIR Manufacturer: HON Model: HN6NA with Carpet Casters Finishes: TBD Upholstery: Grade 3 / C required yardage per SKU = 1.0 yards. Mesh Back: TBD Overview: Comfort is experienced, not perceived. An office chair layered in bulky padding may look comfortable, but it also looks… well… bulky. Technology has helped make everything slimmer, trimmer, and more streamlined—from TVs to mobile phones. Nucleus brings the same sophisticated, high‐tech aesthetic to office seating without sacrificing comfort. Most recently, with the addition of the NEW fully upholstered back of the work chair, the Nucleus Series continues to deliver innovative material inspiration
ilira‐stretch M4 Back Work Chair, Pneumatic, Swivel, Seat Glide, Synchro‐Tilt, Tilt Tension, Tilt Lock, Armless, Polished Aluminum Base
Specifications: Caster: Black open wheel 2‐1/2" diameter wheel. (Hard Wheeled) Base: Polished 5 leg cast aluminum Control: Black heavy gauge steel, seat glide, swivel, side activated tilt tension, tilt lock, synchro‐tilt, 17‐4 taper. Seat: 5/8" wire form, elastomer mesh fabric, 2‐1/2" thick urethane foam cushion. Back: Plastic injection molded, warp knitted polyester mesh fabric. Chair Weight: 40 pounds. Shipping Weight: 49 pounds. Shipped: Completely assembled Shipping Size: 28.75" wide x 25.75" deep x 42.75" high (18.4 cubic feet) Flammability: Bulletin 133 requirements. Note: All measurements are per BIFMA/CMD procedures. Mesh with Support: Body‐conforming ilira‐stretch M4 provides dynamic lumbar support in a backrest that molds to the shape of your back. This passive support moves with you as you sit up, recline, or shift positions throughout the workday.
Key Dimensions: Max. Width............................ 28‐3/4" Max. Depth............................ 25‐3/4" Max. Height........................... 44‐3/4" Seat Size Width.................................... 20" Usable Depth........................ 16‐1/2" ‐ 19" Height from Floor................. 17" ‐ 21" Back Lumbar Height................................... 8‐1/4" Back Size Width............................... 19‐1/4" Height from Seat.............. 25‐1/4" Warranty: Warranted for users up to 300 lbs. Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐08
COLLABORATIVE SQUARE LOUNGE CHAIR Manufacturer: HON, Flock Series Model: HFLSC1 ‐ Dual Fabric Collaborative Seating Fabrics: TBD: 2 Colors, Crypton Fabrics ‐ TBD Standard Leg: L: Finish TBD Overview: Flock Collaborative Solutions makes the most of open spaces with a collection of comfortable lounge and guest seating designed to accommodate any type of user or space. With the addition of dual fabric, it’s easier than ever to customize Flock seating with a wide variety of colors and patterns. Choose from a selection of attractive seat upholstery options and complementary fabrics for the back and sides. Dual fabric Flock seating provides the freedom to liven up any space. SPECIFICATIONS: Frame.: Hardwood plywood using puzzle‐piece construction. All joints are glued and stapled in place for greater durability. Glide:: Zinc construction option. Nylon contact surface. (L option glide has 1/2" of adjustment). Seat: 3‐1/2" foam with 3/4 oz. Dacron topper over a woven seat suspension for maximum comfort. Back: 2‐112" foam with 1/2 oz. Dacron topper. Arm.: 2‐1/2" foam with 1/2 oz. Dacron topper. Chair Weight 50 pounds. Shipping Weight 70 pounds. Shipped completely assembled. Shipping Size.: 35‐1/2" wide x 37" deep x 38" high (27.0 cubic feet). Rating: .Plywood components meet the applicable California Air Resources Board (CARB) 93120 Phase I or Phase II limit on formaldehyde content.
Key Dimensions: Overall: 28‐1/2D X 34‐1/4”W X 28”H Seat: 20‐1/2”D X 21‐1/2”W Back: 21‐1/2”W X 18‐1/2”H Between Arms: 27‐1/2”W Seat to Floor: 18”H Usable Seat Depth: 20‐1/2”D Warranty: Warranted for users up to 300 lbs. Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐09
DESCRIPTION: COLLABORATIVE MINI CYLINDER SEATING Manufacturer: HON Model: HFLY01DF – Dual Fabric Seating Finish: Fabric Grade 3 /C (2 Fabrics) Overview: Flock makes the most of open spaces with a collection of comfortable lounge and guest seating designed to accommodate any type of user or space. With the addition of dual fabric, it’s easier than ever to customize Flock seating with a wide variety of colors and patterns. Choose from a selection of attractive seat upholstery options and complementary fabrics for the back and sides. Dual fabric Flock seating provides the freedom to liven up any space.
Specifications:
Key Dimensions: 18‐1/2”D X 18‐1/2”W X 17”H
Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐10
COLLABORATIVE STOOL SEATING WITH FOOTRING Manufacturer: HON Model: HFSS7 Finishes: TBD Fabric: Upholstery Grade 3 / C – TBD Construction: Glides................... Non‐Adjustable Nylon Glide Base..................... 3/8” Steel Cylinder................Non‐Height Adjustable Return to Center Seat...................... 3/4" Wood Product; 2" Thick Urethane Foam Cushion Back..................... 1/4" Thick Polypropylene Stool Weight........ 51lbs Shipping Weight...58lbs Shipped completely assembled Shipping Size: 21.5" wide x 22" deep x 40.5" high (11 cubic feet).
Key Dimensions: 18”D X 18”W X 39‐1/8”H SEAT: 15‐3/4”D X 15‐3/4”W BACK: 15‐3/4”W X 8”H SEAT TO FLOOR: 31”H USABLE SEAT DEPTH: 15‐3/4” SEAT DIAMETER: 16” ROUND BACK WIDTH 13.25” TO 13.625” BACK HEIGHT FROM SEAT 8” BACK ANGLE 13° Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐11
STAFF TASK CHAIR, NO ARMS Manufacturer: KI Model: SPDNAU, Strive Task Armless Chair, Upholstered Seat Finishes: TBD / Fabric Grade: 3 / C Specifications: Backrest Injection‐molded polypropylene with integral steel cantilever springs. The combination of the slotted polypropylene back and the spring steel provides a supportive flexing back. Springs are nominal 4.5mm diameter chrome silicon valve spring wire. Seat and Shroud Injection‐molded polypropylene, attached directly to the structure. Optional Upholstered Seat Molded urethane foam is attached to an injection‐molded polypropylene seat board, then upholstered using a draw‐string process. The assembled seat pad is attached to the seat by means of hidden fasteners. Note: upholstered seat is required with translucent poly backs. Optional Upholstered Back ½" thick urethane foam is attached to an injection‐molded polypropylene back board, then upholstered using a draw‐string process. The assembled back pad is attached to the back by means of fasteners, which are exposed and are color‐matched to the polypropylene. Underseat Structure Support structure is die‐formed 13‐gauge steel welded to a 1" O.D. x 14‐gauge tubular steel cross member. Frame Finishes Baked‐on electrostatically applied 30 gloss epoxy powder‐coating. Base Injection‐molded glass‐reinforced nylon 5‐blade base (black or warm grey for task chair ‐ black only for task stool). Casters have high‐impact thermoplastic double‐wheels. A single control paddle under the seat operates the height‐adjusting pneumatic cylinder. Casters Casters are double‐wheel (60mm) high‐impact thermoplastic. High‐impact plastic frame. Casters are monochromatic with base. Carpet or hard floor casters are offered. Hard floor casters are black only.
Dimensions: Overall Width 27‐1/2” Overall Depth 27‐1/2” Overall Height 32‐3/4” – 37‐3/4” Arms to floor 26” – 31” Seat Width 18” Seat Depth 18” Seat Height (upholstered – add 1”) 17‐1/4” – 22‐1/4” Warranty: Warranted for ten years
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐12
WOOD CAP ARM LOUNGE SEATING WITH TABLET ARM Manufacturer: Integra, Rendezvous Wood Cap Chair with Tablet Arm Model: Item: RSU (4/5) ‐ 1 / Wood Cap Arm with Tablet Finishes: TBD
Fabrics: COM: 5 yards Contrasting Fabrics Upholstery 2 Colors / Fabric Grade: Crypton Fabrics ‐ TBD Wood Legs / Cap / Tablet: TBD
Standard Options: Higher Back (at 18"H) Wood or Kydex Arm Caps Upholstered Arms Recessed Pull Wood Base Brushed Aluminum Leg Sleeve Weighted Moisture Barrier TB133 (Fire Barrier) Tamper‐proof Fasteners Combination Fabrics Hard Maple or White Oak Features: Tablet Arm has 300 lb Capacity Replaceable Components Steel Inner Construction Dymetrol Suspension Sustainable Materials used in frames Solid Hard Wood Feet Blanket‐wrapped shipping (no cardboard packaging waste)
Dimensions:
w: 33 sw: 21
d: 32 sd: 20
h: 32 sh: 18.5
ah: 24 bh: 16
Warranty: Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
S‐13
STUDENT CLASSROOM SEATING Manufacturer: HON Model: HMN1, Non‐Upholstered, Armless, Casters Finishes: TBD
Mesh Back: TBD Frame: TBD
Overview: The Motivate collection provides comfort, flexibility, technology and quality they need to get things done.
Seating platform evolved from extensive ergonomic research to dramatically reduce pressure points
Designed for multi‐user environments where the use of space is constantly changing
Dynamic flex‐zone seat and back motion provides all‐day comfort for extended meetings and computer work
Molded shell features reinforced resin for flexibility and strength to withstand heavy use and frequent handling
Breathable ilira‐stretch knit back conforms to the spine
Fiber‐reinforced plastic shell is easy to clean
Flip‐up seat allows these chairs to stored easily when not in use
Chairs stack up to four high on the floor Specifications: General ‐
Assembly Type: Fully Assembled Gross Weight: 27.0 lbs. Overall Depth: 23.13" Overall Height: 34.0" Overall Width: 26.75" Stacking Function: Nesting/Stacking Units Per Package: 1 User Weight Capacity: 300.0 lbs.
Chair Back Back Type: Guest Back Width: 19.5" Lumbar Support: Yes
Chair Seat Seat Depth ‐ Useable: 17.0" Seat Overall Depth: 17.0" Seat Width: 17.5"
Chair Base Caster Quantity: 4
Warranty: Warranted for users up to 300 lbs. Full Lifetime Warranty
TAB
LES
FUR
NIT
UR
E C
UT-
SHEE
TS
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐01
24” x 60” ‐ CLASSROOM NESTING TABLES Manufacturer: HON, Motivate Series Model Number: HMVR‐2460G‐NS‐N, Multi‐Surface Casters, No Modesty Panel Finishes: TBD Overview: Motivate tables turn a group space into a training room in a matter of minutes. Each element works seamlessly together to provide a comprehensive solution that is comfortable, flexible, and supportive of technology. Specifications: General :
Assembly Type: Easy to Assemble (ETA) Overall Depth: 24.0" Overall Height: 29.5" Overall Width: 60.0" Units Per Package: 1
Top / Worksurface Top / Worksurface Dimensions: 60 x 24" Top / Worksurface Edge Thickness: 1.13" Top / Worksurface Grommet: No Top / Worksurface Shape: Rectangle Top / Worksurface Surface Material: High‐Pressure Laminate (HPL)
Base Caster Configuration: Dual‐Wheeled Caster Quantity: 4
Dimensions: 60”W x 24”D x 29.5”H Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐01A
24” x 60” ‐ CLASSROOM ADJUSTABLE HEIGHT BASE TABLES Manufacturer: HON, Motivate Series Model Number: HMVR‐2460G‐AH‐N, Multi‐Surface Casters, No Modesty Panel Finishes: TBD Overview: Motivate tables turn a group space into a training room in a matter of minutes. Each element works seamlessly together to provide a comprehensive solution that is comfortable, flexible, and supportive of technology. Specifications: General :
Assembly Type: Easy to Assemble (ETA) Overall Depth: 24.0" Overall Height: 29.5" Overall Width: 60.0" Units Per Package: 1
Top / Worksurface Top / Worksurface Dimensions: 60 x 24" Top / Worksurface Edge Thickness: 1.13" Top / Worksurface Grommet: No Top / Worksurface Shape: Rectangle Top / Worksurface Surface Material: High‐Pressure Laminate (HPL)
Base Caster Configuration: Dual‐Wheeled Caster Quantity: 4
Dimensions: 60”W x 24”D x 29.5” – 32.5”H Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐02
HOSPITALITY SQUARE TABLE WITH X BASE Manufacturer: HON Model Numbers: Tops: H1312 (2MM Edge) Base: HXSP‐36 3” Diameter Single Column – (Chrome) Finish: Laminate Top ‐ TBD Top Features:
HIGH PRESSURE .030’ THICK LAMINATE 1.125” PARTICLE BOARD CORE, MINIMUM 45 LBS
INDUSTRIAL GRADE SUBSTRATE TOP INCLUDES PAPER BACKER HOSPITALITY TABLE TOPS AND LEGS ARE SHIPPED
SEPARATELY IN 2 CARTONS. MEETS OR EXCEEDS ANSI/BIFMA AND ISTA PEFORMANCE
STANDARDS Base Features:
CAST IRON MOUNTING PLATE WITH HARDWARE (12 GAUGE FLAT STEEL ON HRSPBASE)
ADJUSTABLE LEVELING FLOOR GLIDES HOSPITALITY TABLE TOPS AND BASES ARE SHIPPED
SEPARATELY IN 2 OR MORE CARTONS. MEETS OR EXCEEDS ANSI/BIFMA AND ISTA PERFORMANCE
STANDARDS 16 GAGE 3.0” DIAMETER STEEL COLUMN
Dimensions: 42” Square x 30”H Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐03
30” X 60” RACETRACK CONFERENCE TABLE WITH T‐LEG BASE Manufacturer: HON, Preside Series Model Numbers: Top HTL‐J, Knife Edge, 3060 |Base HTTLEG60 Aluminum Finish Finish: Laminate Top TBD Overview: Preside conference series is a broad, versatile solution for collaborative meetings and presentations. It is designed to embrace technology with a variety of options for displaying audiovisual equipment, supporting data and power, and routing cables. From larger conference rooms to smaller common areas, the integrated technology and added leg room enhances collaboration. With Preside, it's easier to keep everyone connected.
Comfortably accommodates up to six people while conserving floor space,
Racetrack shape allows meeting participants to see each other easily
Base design maximizes knee and leg space,
Scratch‐, spill‐ and stain‐resistant laminate withstands heavy use,
Heavy‐grade, warp‐resistant particleboard withstands heavy activity,
Leveling glides compensate for uneven floors. CONSTRUCTION: 1‐1/8” MDF on Laminate J edge and all Veneer tops. Machined‐in score lines on underside of top assist in locating bases in correct position. Laminate tops made with high‐pressure laminate and low‐emission backer. Steel plates and recessed worksurface connectors connect sections of tops together. Laminate 60”W and 72”W top ship with support rail. Grommet cutouts always centered on each section of top, (1) cutout per section.
COMPLIANCE Meets or exceeds current ANSI/BIFMA and ISTA requirements Particleboard grade ANSI IM3 or better
Base
Base Finish: T‐Leg (2each) Glides Finishes: Aluminum
Dimensions: 60”W x 30”D x 30”H Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐04
66” x 29”H Round Folding Tables Manufacturer: MityLite Model: ABS 66” Round x 29”H Finish: TBD
Overview: The proprietary edge construction of the MityLite ABS Round Table is three times more durable than leading competitors. A wide variety of round and specialty sizes are available for space‐saving setups or unique configurations. MityLite ABS tables are perfect for high‐use, high‐turn areas and provide years of reliable service. Features: SUPPORTS MORE THAN 2,000 LBS (907KGS) DURABLE, LIGHTWEIGHT DESIGN VARIETY OF LEG OPTIONS AVAILABLE MODERATE HEAT SHIELD SUBSURFACE STAIN‐RESISTANT TABLETOP WIPES CLEAN MITY‐EDGE™ IS 3X MORE DURABLE THAN COMPETITORS TABLE LEGS FOLD FOR EASY HANDLING & STORAGE NON‐MARRING GLIDES‐ TABLETOP Surface is formed from high‐impact ABS plastic and is permanently bonded to the internal wood laminate core. A variety of smooth and textured finishes are available. UNDERSURFACE Bottom of table is formed from high‐impact ABS plastic and is permanently bonded to the internal wood laminate core and hard wood frame. TABLE EDGE Round tables are equipped with Mity‐Edge, which lasts 3X longer than leading competitors’. It is made of ABS plastic and is bonded to the entire interior perimeter of the table. A finished bumper is also chemically welded to the exterior perimeter of the table, creating a moisture‐resistant barrier. This bumper also accepts standard skirting clips. FRAME Frame & legs are constructed of steel. Steel is powdered coated to increase durability & is scratch resistant. TABLE LEGS Reinforced wishbone legs are welded to the cross and top bars. Legs are 29” to 30” with nylon or steel closures for floor protection. Legs fold and lock with a gravity‐operated steel ring. Folding mechanism consists of 2 Z‐bars and a U‐channel. LEG ASSEMBLIES Leg assemblies are mounted to the internal wood frame using steel clamps. Clamps, folding mechanism, and brackets are secured into “T‐Nut” type fasteners. “T‐Nut” fasteners are pressed into frame and have anti‐spin prongs.
Dimensions: 66” diameter x 29”H Warranty: Warranted for fifteen years
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐05
26” COLLABORATIVE CYLINDER TABLE Manufacturer: HON, Flock Series Model: HFTLD26 Finishes: HPL (Laminate Top) and Legs ‐ TBD Overview: Features: Three styles of legs. (Adjustable glide has 1/2" of adjustment) Construction: Round Table with Legs are a diameter of 26” x 17” tall Shipping Information: Ships easy to assemble. Leg attachment is required. Legs ship in a hardware bag that will be secured to the inside of the table drum for shipping. Compliance: Product meets or exceeds applicable ANSI/BIFMA and ISTA Performance Standards. Certified SCS Indoor Advantage™ Gold Conforms to the BIFMA e3 Furniture Sustainability Standard level 2.
Key Dimensions: 26”Diameter x 17‐1/8”H Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐06
24” COLLABORATIVE CUBE TABLE Manufacturer: HON, Flock Series Model: HFTLS24 Finishes: HPL (Laminate Tops and Sides) and Legs ‐ TBD Overview: Features: Three styles of legs. (Adjustable glide has 1/2" of adjustment) Construction: Square Table is a mitered MDF board construction. Shipping Information: Ships easy to assemble. Leg attachment is required. Legs ship in a hardware bag that will be secured to the inside of the table drum for shipping. Compliance: Product meets or exceeds applicable ANSI/BIFMA and ISTA Performance Standards. Certified SCS Indoor Advantage™ Gold Conforms to the BIFMA e3 Furniture Sustainability Standard level 2.
Key Dimensions: 24”W X 24”D X 17‐1/8”H Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐07
COLLABORATIVE STANDING HEIGHT CAFE TABLE Manufacturer: HON, Flock Series Model: Top HFTLD36 | Base: HFDB42B (No Footring) Finishes: TBD CONSTRUCTION
1‐1/8" particleboard core with melamine surface top and bottom or high pressure laminate and low‐emission backer
1‐1/8" MDF core with veneer surface top and low‐emission backer
Countersunk threaded inserts in underside of tops to properly locate bases
2mm edgeband on laminate/melamine tops FEATURES
41" high tables:
36" round laminate TABLE BASE: CONSTRUCTION 3/8" thick steel base Four zinc die cast adjustable glides with durable nylon pad 2‐1/4" diameter 12 gauge steel upright support 12 gauge mounting hub Adjustable glides with 1/4" of adjustment Powder coat painted finish COMPLIANCE
Meets or exceeds applicable ANSI/BIFMA standards
Meets or exceeds ISTA shipping standards
Indoor Advantage
Dimensions: 36” Round X 41”H Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐08
Fixed Height Mobile Rectangle Tables Manufacturer: HON, Huddle Series Model: 72 x 30 top HMT3072G, with posted legs HMBPOST‐C and casters, no grommets Laminate Finishes: TBD Edge Profile: Edgeband Specifications: Tops: G Edge (2mm) • 1‐1/8” thick particleboard with melamine surface bottom and top. 2mm PVC edgebanding around all four edges. Hardware included.
HMT Series (Huddle) table product meets or exceeds ISTA shipping and ANIS/BIFMA X5.5 (latest Rev.) testing requirements for office furniture Post Legs:
Top Mounting Plate: • 3/16” thick steel plate, painted black • Part #: 650‐3906 Vertical Component: • 1‐3/4” diameter round 16 gauge steel tube, painted per
order • Welded to top plate • 7/16” friction ring install for casters, Part #: 650‐3910 • 5/16‐18 thread for glides, Part #: 650‐3975
Model Features: Four (4) legs per MBPOST model • Legs are non‐handed and can be installed at any of the four corners. Plate orientation and placement defined by pilot hole pattern in Huddle top. • HMBPOST Series (Huddle) table product meets or exceeds ISTA shipping and ANIS/BIFMA X5.5 (latest Rev.) testing requirements for office furniture
Dimensions: 72”D x 30”W”x30”H Warranty: Full 12‐Year Warranty. •Electrical components (lamps and ballasts are not covered) • Laminate surfaces
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐09
Fixed Height Mobile Half Round Tables Manufacturer: HON, Huddle Series Model: 60x 30 top HMTHR3060G, with posted legs HMBPOST‐C and casters, no grommets Laminate Finishes: TBD Edge Profile: Edgeband Specifications: Tops: G Edge (2mm) • 1‐1/8” thick particleboard with melamine surface bottom and top. 2mm PVC edgebanding around all four edges. Hardware included.
HMT Series (Huddle) table product meets or exceeds ISTA shipping and ANIS/BIFMA X5.5 (latest Rev.) testing requirements for office furniture Post Legs:
Top Mounting Plate: • 3/16” thick steel plate, painted black • Part #: 650‐3906 Vertical Component: • 1‐3/4” diameter round 16 gauge steel tube, painted per
order • Welded to top plate • 7/16” friction ring install for casters, Part #: 650‐3910 • 5/16‐18 thread for glides, Part #: 650‐3975
Model Features: Four (4) legs per MBPOST model • Legs are non‐handed and can be installed at any of the four corners. Plate orientation and placement defined by pilot hole pattern in Huddle top. • HMBPOST Series (Huddle) table product meets or exceeds ISTA shipping and ANIS/BIFMA X5.5 (latest Rev.) testing requirements for office furniture
Dimensions: 60”D x 30”W”x30”H Warranty: Full 12‐Year Warranty. •Electrical components (lamps and ballasts are not covered) • Laminate surfaces
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐10
Fixed Height Mobile Rectangle Tables Manufacturer: HON, Huddle Series Model: 60 x 24 top HMT2460G, with posted legs HMBPOST‐C and casters, no grommets Laminate Finishes: TBD Edge Profile: Edgeband Specifications: Tops: G Edge (2mm) • 1‐1/8” thick particleboard with melamine surface bottom and top. 2mm PVC edgebanding around all four edges. Hardware included.
HMT Series (Huddle) table product meets or exceeds ISTA shipping and ANIS/BIFMA X5.5 (latest Rev.) testing requirements for office furniture Post Legs:
Top Mounting Plate: • 3/16” thick steel plate, painted black • Part #: 650‐3906 Vertical Component: • 1‐3/4” diameter round 16 gauge steel tube, painted per
order • Welded to top plate • 7/16” friction ring install for casters, Part #: 650‐3910 • 5/16‐18 thread for glides, Part #: 650‐3975
Model Features: Four (4) legs per MBPOST model • Legs are non‐handed and can be installed at any of the four corners. Plate orientation and placement defined by pilot hole pattern in Huddle top. • HMBPOST Series (Huddle) table product meets or exceeds ISTA shipping and ANIS/BIFMA X5.5 (latest Rev.) testing requirements for office furniture
Dimensions: 60”D x 24”W”x30”H Warranty: Full 12‐Year Warranty. •Electrical components (lamps and ballasts are not covered) • Laminate surfaces
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐11
Fixed Height Mobile Half Round Tables Manufacturer: HON, Huddle Series Model: 48 x 32 top HMTHR3248G, with posted legs HMBPOST‐C and casters, no grommets Laminate Finishes: TBD Edge Profile: Edgeband Specifications: Tops: G Edge (2mm) • 1‐1/8” thick particleboard with melamine surface bottom and top. 2mm PVC edgebanding around all four edges. Hardware included.
HMT Series (Huddle) table product meets or exceeds ISTA shipping and ANIS/BIFMA X5.5 (latest Rev.) testing requirements for office furniture Post Legs:
Top Mounting Plate: • 3/16” thick steel plate, painted black • Part #: 650‐3906 Vertical Component: • 1‐3/4” diameter round 16 gauge steel tube, painted per
order • Welded to top plate • 7/16” friction ring install for casters, Part #: 650‐3910 • 5/16‐18 thread for glides, Part #: 650‐3975
Model Features: Four (4) legs per MBPOST model • Legs are non‐handed and can be installed at any of the four corners. Plate orientation and placement defined by pilot hole pattern in Huddle top. • HMBPOST Series (Huddle) table product meets or exceeds ISTA shipping and ANIS/BIFMA X5.5 (latest Rev.) testing requirements for office furniture
Dimensions: 48”D x 32”W”x30”H Warranty: Full 12‐Year Warranty. •Electrical components (lamps and ballasts are not covered) • Laminate surfaces
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐12
24” x 60” x 29”H Folding Rectangle Tables Manufacturer: Mitylite Model: ABS 24”D x 60’W x 29”H Finish: TBD
Overview: The proprietary edge construction of the MityLite ABS Round Table is three times more durable than leading competitors. A wide variety of round and specialty sizes are available for space‐saving setups or unique configurations. MityLite ABS tables are perfect for high‐use, high‐turn areas and provide years of reliable service. Features: SUPPORTS MORE THAN 2,000 LBS (907KGS) DURABLE, LIGHTWEIGHT DESIGN VARIETY OF LEG OPTIONS AVAILABLE MODERATE HEAT SHIELD SUBSURFACE STAIN‐RESISTANT TABLETOP WIPES CLEAN MITY‐EDGE™ IS 3X MORE DURABLE THAN COMPETITORS TABLE LEGS FOLD FOR EASY HANDLING & STORAGE NON‐MARRING GLIDES‐ TABLETOP Surface is formed from high‐impact ABS plastic and is permanently bonded to the internal wood laminate core. A variety of smooth and textured finishes are available. UNDERSURFACE Bottom of table is formed from high‐impact ABS plastic and is permanently bonded to the internal wood laminate core and hard wood frame. TABLE EDGE Round tables are equipped with Mity‐Edge, which lasts 3X longer than leading competitors’. It is made of ABS plastic and is bonded to the entire interior perimeter of the table. A finished bumper is also chemically welded to the exterior perimeter of the table, creating a moisture‐resistant barrier. This bumper also accepts standard skirting clips. FRAME Frame & legs are constructed of steel. Steel is powdered coated to increase durability & is scratch resistant. TABLE LEGS Reinforced wishbone legs are welded to the cross and top bars. Legs are 29” to 30” with nylon or steel closures for floor protection. Legs fold and lock with a gravity‐operated steel ring. Folding mechanism consists of 2 Z‐bars and a U‐channel. LEG ASSEMBLIES Leg assemblies are mounted to the internal wood frame using steel clamps. Clamps, folding mechanism, and brackets are secured into “T‐Nut” type fasteners. “T‐Nut” fasteners are pressed into frame and have anti‐spin prongs.
Dimensions: 24” x 60” x 29”H Rectangle Warranty: Warranted for fifteen years
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐13
24” x 60” ‐ CLASSROOM FIXED COMPUTER TABLES WITH WIRE MANAGEMENT, GROMMETS AND GLIDES Manufacturer: HON, Motivate Series Model Number: HMVR‐2460G‐FX, 2 Grommets, Glides, No Modesty Panel and with Wire Management Components including but not limited too: Power Base In‐Feeds, Power Harness, Power Jumpers, Ganging Hardware, Wire Management Strips and Troughs Finishes: TBD Overview: Motivate tables turn a group space into a training room in a matter of minutes. Each element works seamlessly together to provide a comprehensive solution that is comfortable, flexible, and supportive of technology. Specifications: General :
Assembly Type: Easy to Assemble (ETA) Overall Depth: 24.0" Overall Height: 29.5" Overall Width: 60.0" Units Per Package: 1
Top / Worksurface Top / Worksurface Dimensions: 60 x 24" Top / Worksurface Edge Thickness: 1.13" Top / Worksurface Grommet: No Top / Worksurface Shape: Rectangle Top / Worksurface Surface Material: High‐Pressure Laminate (HPL)
Dimensions: 60”W x 24”D x 29.5”H Warranty: Full Lifetime Warranty
TDSi – 1906 Thomes Avenue, Cheyenne, WY 82001 T| 307.775.9970 M| 307.630.8406 E| [email protected] | www.tdsi.us 1
Laramie County Community CollegePathfinder Building
T‐14
24” x 60” ‐ CLASSROOM ADJUSTABLE HEIGHT COMPUTERTABLES WITH WIRE MANAGEMENT, GROMMETS AND GLIDES Manufacturer: HON, Motivate Series Model Number: HMVR‐2460G‐AH, 2 Grommets, Glides, No Modesty Panel and with Wire Management Components including but not limited to: Power Base In‐Feeds, Power Harness, Power Jumpers, Ganging Hardware, Wire Management Strips and Troughs Finishes: TBD Overview: Motivate tables turn a group space into a training room in a matter of minutes. Each element works seamlessly together to provide a comprehensive solution that is comfortable, flexible, and supportive of technology. Specifications: General :
Assembly Type: Easy to Assemble (ETA) Overall Depth: 24.0" Overall Height: 29.5" Overall Width: 60.0" Units Per Package: 1
Top / Worksurface Top / Worksurface Dimensions: 60 x 24" Top / Worksurface Edge Thickness: 1.13" Top / Worksurface Grommet: No Top / Worksurface Shape: Rectangle Top / Worksurface Surface Material: High‐Pressure Laminate (HPL)
Dimensions: 60”W x 24”D x 29.5”H Warranty: Full Lifetime Warranty