cinetension b series - projector · cinetension b series section 1: screen design 1.1 what is it...

PRODUCT WHITE PAPER http://www.elitescreens.com

1 Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.

Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia

CINETENSION B SERIES

Section 1: Screen Design 1.1 What is it for?

The CineTension B is the ideal tab-tensioned projector screen for the CE Retail channel. It

has a long distance IR/RF remote control kit. A detachable wall switch keypad is also

included.

1.2 How does it work?

Its tab-tension design ensures that its CineWhite® UHD material maintains the necessary

flatness for its wide diffusion uniformity. The white aluminum housing is designed to

accommodate floating wall/ceiling brackets that align with wall studs and ceiling joists

providing a simple DIY installation.

Section 2: Product Features 2.1 Characteristics

Screen Material

• CineWhite® UHD 1.15 gain (tensioned matte white) front projection material

• ISF Certified for accurate color points, color temperature and dynamic range

• Wide diffusion uniformity allows viewers to enjoy a clear picture of equal brightness

from any angle

• Black borders absorb projector overshoot while enhancing visual contrast

• 4K/8K Ultra HD, Active 3D, HDR Ready

• Compatible with Ultra/Short and Standard throw projectors

Design and Installation

• Moisture resistant white aluminum housing

• Rust resistant aluminum floating brackets allow flush wall/ceiling installations to be

centered

• Tab-tension material design provides uniform flatness over the entire screen surface

• Radio Frequency and Infrared Remotes with 3-position wall keypad switch included

Quality and Reliability

• Fast acting tubular motor has superior weight tolerance and operational lifespan

• 2-year Parts & Labor manufacturer's warranty

• 3-year warranty offered through ENR-G program (Education, Non-Profit, Religious and

Government)




2.2 Motor Specifications – Tubular Motor

Screen

Size

Tube

Diameter

(mm)

Output

Current

(Amps)

Output

Speed

(RPM)

Output

Torque

(N.m)

Voltage

(AC)

Power

(Watts)

Frequency

(Hz)

Noise

Level

(dB)

Running

Time

(Min)

Protection

Index (Ip)

Insulation

Class

96”

35 1.1 14 10 120 130 60 45 4 44 H

110”

125”

135”

150

2.3 Model Numbers

Model Number Diag.

Size

Aspect

Ratio

Viewing

Height

(in)

Viewing

Width

(in)

Screen Material Gain Case

Color

N.W.

(lbs)

G.W.

(lbs)

Packing Dims.

(LxWxH)

TE96HW2B-E24 96" 16:9 47.2 83.9 CineWhite® UHD 1.15 White 48.7 67.0 107.9"x5.9"x5.9"





Section 3: Screen Material Specifications

3.1 Characteristics

CineWhite® UHD (Tension Matte White) is a

reference-grade 1.15 gain projector screen

material that is certified by the world renowned

Imaging Science Foundation for its superb color

temperature, contrast and black level

performance. It has wide diffusion uniformity

that allows equal brightness levels over a 180°

viewing angle. The tension PVC material

construction has the needed pliability to

maximize flatness in a “roll-up” projection

surface. The versatile properties of this material make it a natural fit with either standard or

short-throw projectors. The material is also suited for either residential or commercial

application. The material is easily washed using a mild soap and water solution.




Features & Benefits

• Gain: 1.15

• Viewing Angle: 180° (90°LR)

• Tensioned matte white front projection material

• ISF Certified for accurate color points, color temperature and dynamic range

• Wide diffusion uniformity allows viewers to enjoy a clear picture of equal brightness from any

angle

• 4K/8K Ultra HD, Active 3D, HDR Ready

3.2 Gain and Viewing Angle Chart

Specifications

Thickness 0.28 mm

Weight 399 g/m²

Maximum Height 3.6 M

On-axis Gain 1.15

Half-Gain Angle Does not reach half gain




Section 4: Execution

4.1 Important Safety & Warning Precautions

Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top

Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved changes or

modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void

your warranty. For more information, please contact our Technical Support Dept. at (877) 511-1211 Ext. 604.

• Please retain this user’s guide for future reference.

• To avoid damaging the unit, do not use with any unauthorized accessories not recommended by

the manufacturer.

• Handle the unit carefully during transportation to avoid any damages.

• To ensure safe and reliable operation, direct connection to a properly grounded power source is

advised.

• The power outlet supplying power to the unit should be close to the unit and easily accessible.

• Do not install the unit on uneven or inclined surfaces.

• Do not put heavy objects on the power cord and position it properly to avoid creating a trip

obstacle.

• Never overload the power cord to prevent an electric shock or fire due to a loose contact or a

short circuit.

• There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by

yourself. No one except authorized technicians can open and make repairs to this unit.

• Make sure the power source this unit is connected to has a continuous power flow.

• If there is need to use an extension cord, make sure the cord has an equal rating as the appliance

to avoid overheat.

• Do not handle the power plug when your hands are wet or your feet are in contact with water.

Do not use this unit under the following circumstances.

• Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.

• Avoid direct Sunshine, rain shower and moisture.

• Keep away from fire sources and high temperature to prevent this device from overheating.

• Cut off the power supply first before transportation or maintenance.

• Fully disconnect from the power supply when the unit is not in use for a long period of time, as

should be done with any other electric household appliance.

• To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is

obvious damage or if there are any evident broken parts.

Pre-Installation

1. Carefully unpack the screen.

2. Always handle the screen in a leveled position on a clean surface.




3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign

particles such as dust, sawdust, and/or liquids.

4.2 Installation Warning

Due to various installation environments, the instructions provided in this user’s guide are

for reference only. Please consult a professional installation company for further

installation and safety advice. The installer must insure that proper mounting hardware is

used to provide adequate strength suitable for the installation. Elite Screens is not liable for

any faulty installations.

Individual modifications to this product are prohibited and will void the manufacturer warranty.

Please contact Elite Screens Customer Service for any questions.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that the interference will not occur on a particular installation. If this

equipment causes harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures.

✓ Reorient or relocate the receiving antenna of the device that may be causing the interference.

✓ Increase the separation between the screen and the device’s receiver.

✓ Connect the equipment into a different power outlet other than the device.

Note

Regardless of the mounting method, the screen should be securely supported so that the vibration or

pulling on the viewing surface will not cause the casing to become loose or fall. The installer must

insure that the fasteners used are of adequate strength and suitable for the installation location.

4.3 Hardware Parts List

Please make sure all parts listed below are included before proceeding with the installation.

Wall screws included with this product are complimentary and may not be adequate for all

mounting surfaces. Consult with a professional installer or hardware store for proper

mounting screws and anchors.




A. Wall/Ceiling Brackets x 3

B. ST5x40 Self-drilling screws x 12

C. Dry-wall anchor x 12

4.4 Installation Instructions

A. Wall Mount

Flush wall mount (slideable)

2

1. Determine where the screen will be installed. Measure and mark the distance between the top and bottom screw holes from each

bracket. Then, drill a hole on all marked areas and install the brackets on the wall with the screws.

Two or more people are required for the next step.

2. Lift the screen up leveled with the brackets.

3. Slide the screen up in the bracket’s “upper lip” and push it in to the “bottom lip” until you hear a “click” sound. This will

confirm the screen is secure and in place.

B. Ceiling Mount

Flush ceiling mount (slideable)

1. Determine where the screen will be installed. Measure and mark the distance between the top and bottom screw holes from each

bracket. Then, drill a hole on all marked areas and install the brackets on the wall with the screws.

Two or more people are required for the next step.

Screen-to-wall installation Side View

Screen-to-ceiling installation

Side View




2. Lift the screen up leveled with the brackets.

3. Slide the screen up in the bracket’s “upper lip” and push it in to the “bottom lip” until you hear a “click” sound. This will

confirm the screen is secure and in place.

C. Hidden Mount

Refer to the installation procedures for wall mount and/or ceiling mount for instructions.

D. Screen Removal

Hold the screen’s case and push the bottom tab on the bottom of the bracket,

then lift the screen.

4.5 Accessories

A. IR Remote B. RF Remote C. Wall keypad switch D. 12v trigger cable

4.6 Screen Operation

Electric Current: Depending upon region, your Elite Screen will operate on 100v, 110v, or 220v voltage.

Choose the voltage acoording to the local requirement

1. After ensuring the power outlet & screen is compatible (voltage), plug the power cord into the power outlet.

2. Once the screen has power, you’ll be able to control it using any of the 4 methods described below.

4 ways to control your CineTension B

Side View

press lightly

1. Wall Switch Keypad (Item C, Fig 1): The wall switch keypad is a wall mount control box with up/stop/down

buttons. It plugs directly into the screen’s RS-285 input port located next to the power cord.

2. IR remote control (Item A, Fig 2): The Infrared functions by direct line of sight contact with a beam range of 30

feet. Aim the IR remote at the oval shaped window located on the wall switch keypad, below the down button.

3. RF Remote Control (Item B): The radio waves eliminate the need for a direct line of sight with a range of 100

feet. See How to program your RF remote on next section if your RF remote does not operate the screen.

4. 12volt Projector Trigger (Item C, Fig. 3): Synchronizes the screens UP/DOWN operation with the projector’s

power cycle.




4.7 How to program your RF remote to your screen

1. Remove the cover located on the right side of the screen.

2. With a thin, sharp object, press the internal SW1button.

a. You will hear a single "beep" once button is detected

3. Let the screen drop completely using the IR remote or the manual keypad switch

4. Press and hold the internal SW1 button for 5 seconds.

a. You will hear continuous "beeping"

5. During the continuous beeping, press and hold the UP button on the RF remote for 3

seconds

6. You should now be able to control your screen with your RF remote.

Fig.2

IR/RF remote

NOTE: To avoid overheating, the tubular motor will shut off after 5 minutes of continuous use of the screen

(non-stop lowering and retracting of the screen.) You may resume regular use after 15 minutes.

Fig.1

Wall switch keypad

SW1 button

RS485

port




4.8 How to deprogram the RF/IR remote

1. Press and hold internal SW1 button

a. You will hear continuous "beeping"

2. During the continuous beeping, press the button on back of remote

with a thin, sharp object.

3. Release both buttons after a set of quick beeps.

4. Your remote has now been erased from the screen's memory.

4.9 How to wire the 12 volt trigger (ZSP-12V-R)

Instructions:

1. The 3.5 mm mono jack cable wiring needed to extend the ZSP-12V-R to the projector’s trigger

output port is not provided.

2. Determine the length required and purchase a 3.5 mm Mono Jack cable

3. Splice the 3.5 mm Mono Jack (Stereo will not work) and wire the Black and Red wires to the

ZSP-12V-R cable as shown above in the illustration.

4. Connect the Mono jack end to your projector’s output trigger port and the ZSp-12V-R to the

Trigger port located on the right side of the end cap (see side view illustration above).

5. Turn on the trigger feature on your projector and the screen will synchronize with the

projector’s power cycle to deploy and retract your CineTension B screen.

Note: You can also test the function of the trigger using a 9-volt battery.

3-30 volt

trigger input

Side view of case

3.5 mm Mono jack cable (not included) ZSP-12V-R cable

Red cable = + DC

3-30v

Black cable =

Ground




4.9 How to tension your screen.

The tension has been properly preset for optimal performance. However, if the screen requires

tension adjustment, please be careful as the tension system can become permanently damaged if not

done correctly. Permanent damage to the tension system is not covered under warranty.

1. Fully deploy the screen.

2. At either end of the weight bar, press and hold button on knob.

3. Turn knob clockwise to tighten, counter clockwise to loosen.

a. Knob will only allow to tighten/loosen one notch at a time.

4. Repeat process on other side if necessary.




Section 5: Product Specifications

5.1 Dimensions

Model Number Diag.

Size A A1 A2 A3 B B1 B2 B3 B4 B5 B6 B7/B8

Unit: Inches

TE96HW2B-E24 96" 98.5 83.9 87.8 94.1 78.1 47.2 23.6 74.1 2.0 2.0 2.0 1.8

TE110HW2B-E24 110" 118.7 95.9 103.7 114.2 86.8 53.9 23.6 82.9 3.9 3.9 3.9 3.0

TE125HW2B-E24 125" 131.7 108.9 116.8 127.2 94.2 61.3 23.6 90.2 3.9 3.9 3.9 3.0

TE135HW2B-E24 135" 140.4 117.7 125.6 136.2 99.0 66.1 23.6 95.1 3.9 3.9 3.9 3.0

TE150HW2B-E24 150" 153.3 130.7 138.6 149.0 106.4 73.5 23.6 102.5 3.9 3.9 3.9 3.0

Unit: mm

TE96HW2B-E24 96" 2503 2130 2230 2390 1983 1198 600 1883 50 50 50 45

TE110HW2B-E24 110" 3015 2435 2635 2900 2205 1370 600 2105 100 100 100 75

TE125HW2B-E24 125" 3345 2767 2967 3230 2392 1557 600 2292 100 100 100 75

TE135HW2B-E24 135" 3565 2990 3190 3460 2515 1680 600 2415 100 100 100 75

TE150HW2B-E24 150" 3895 3320 3520 3785 2703 1868 600 2603 100 100 100 75

5.2 Drawing




5.3 Pictures

CineTension B Front View

CineTension B Angled View




End Cap Detail

Weight Bar & Tab-Tension Detail




Remote Kit

Bracket Detail

Life Style




Section 6: About Elite Screens

6.1 Company Description

Elite Screens Inc. is a California based company that specializes in making quality commercial

and home-theater projection screens for the retail and custom install sales channels. Our

company began as an innovative venture into the projection market by manufacturing veterans

from the AV/IT industry. Elite Screens quickly established itself as an entry level commercial

and home theater screen manufacturer. This was accomplished by making a quality product

cost effective with a focus on mass-producing screen material, sizes and aspect ratios that were

most commonly preferred by AV customers in general. We focused on uniformity with what

would match the mainstream demographic while including extra features that are not usually

included by other manufacturers. In time, we progressed from just retail sales into the realm of

custom installer/integrator manufacture as our numerous reviews and awards will attest. We

stand behind our product and are so certain of customer satisfaction with the quality of our

product that we offer a 2-year manufacturer's warranty which is twice the industry standard. In

our continued devotion to excellence in products and service, we are committed to

implementing green practices with our production. We have adopted manufacturing methods

that promote conservative regulation of our energy needs. Our simple product designs

combined with the expertise of our permanent staff ensures that our entire line of products are

made by experienced hands devoted to the high standards of today’s audio-video consumer.

###

cinetension b series - projector · cinetension b series section 1: screen design 1.1 what is it...

Documents