cisco.pass4sure.500 006.v2015!04!05.by.janette.92q unprotected

www.vceplus.com - Website designed to help IT pros advance their careers - Born to Learn

Pass4Sure.500-006.92q

Number: Cisco 500-006Passing Score: 800Time Limit: 120 minFile Version: 6.4

Cisco 500-006Implementing Cisco TelePresence Video Solution

a) With the help of Allah (God), I passed exam with this dump.. 88% questions from this dump..b) Questions are given in sections in which everything is obvious regarding topics as well as number of questions.c) I truly believe that I am lucky enough to get myself prepared from one of the best sources. Not only the material and explanation is good but alsothese dump problems are divine.d) Use this, definitely you figure out the differences that I have mentioned.e) if any want to pass this exam so please purchase this vce file questions, u will definitely pass this exam

Sections1. Examining Endpoints2. Exploring Basic Call Control3. Exploring Advanced VCS Features4. Deploying Video Conferencing Bridges5. Deploying TelePresence Content Server6. Exploring TMS7. Provisioning8. Examining TelePresence Conductor9. Mix questions


Exam A

QUESTION 1Which troubleshooting tools are available on the Cisco TelePresence VCS (X5 or above)?

A. configuration logs for all endpoints registered, endpoint status logs, and Cisco TelePresence MCU conference reportsB. system resources, call history, search history, zone and subzone status, warnings, event logsC. H.323, SIP, and ISDN syslogs for each endpoint registered, all logs for all calls on the networkD. searches, locate tools, check rules, syslog, call history, current calls, call logs from the endpoints

Correct Answer: BSection: Exploring Basic Call ControlExplanation

Explanation/Reference:straight answer.

QUESTION 2What information about a change can you determine from the configuration log on a Cisco TelePresence VCS?

A. the E.164 alias of the person who made the changeB. the IP SIP address of the person who made the changeC. the H.323 ID of the person who made the changeD. the username of the person who made the change

Correct Answer: DSection: Exploring Advanced VCS FeaturesExplanation

Explanation/Reference:Explanation:

QUESTION 3What do you need to do in order to prevent browsers from generating warnings about certificates when they access the Cisco TelePresence VCS?

A. Install a certificate from a trusted certificate authority.B. Install a certificate from the TAC.C. Disable certificates on the Cisco TelePresence VCS.D. Disable the CPL scripts from running to check security.


Correct Answer: ASection: Exploring Advanced VCS FeaturesExplanation


QUESTION 4Which feature must be enabled on the Cisco TelePresence VCS in order to monitor the status of non-presence-enabled clients?

A. Presence User AgentB. interworkingC. FindMe?D. LDAP


Explanation/Reference:reliable answer.

QUESTION 5Which user groups on the Cisco TelePresence VCS are available for LDAP integration?

A. administration and FindMeTM usersB. administration and supervisor usersC. supervisor users and client usersD. client users and FindMe users



QUESTION 6Which regular expression matches 50440123 and 4044123, but not 60440123?

A. [6].*


B. [45].*C. {6}.*D. {45}.*

Correct Answer: BSection: Exploring Advanced VCS FeaturesExplanation


QUESTION 7What type of DNS record is required for URI dialing?

A. MX recordB. SIP recordC. SRV recordD. HTTP record

Correct Answer: CSection: Exploring Advanced VCS FeaturesExplanation

Explanation/Reference:answer is absolute.

QUESTION 8What does it mean when an endpoint is Multiway-enabled?

A. Endpoints can transfer calls from one endpoint to another.B. Endpoints can make simultaneous SIP and H.323 calls.C. Endpoints can deliver three or more streams of video.D. Endpoints can escalate calls to an MCU.


Explanation/Reference:agree with the answer.


QUESTION 9What will happen if you make configuration changes to a VCS peer in a cluster that is not the master?

A. The peer will not allow the changes to be saved.B. The changes will propagate to other peers, including the master.C. The master will overwrite the changes.D. The peer will hold the changes but not synchronize the changes to the master.


Explanation/Reference:real answer.

QUESTION 10In which order will pre-search operations occur on a Cisco TelePresence VCS?

A. Transforms, Call Policy, User PolicyB. Call Policy, User Policy, TransformsC. User Policy, Call Policy, TransformsD. Transforms, User Policy, Call Policy



QUESTION 11How many peer relationships are required to implement a hierarchical dial plan for a network of 6 regional VCS controls?

A. 1B. 2C. 6D. 15

Correct Answer: C


Section: Exploring Advanced VCS FeaturesExplanation

Explanation/Reference:exact answer.

QUESTION 12Which statement is true about the registration restriction policy within the Cisco TelePresence VCS?

A. Allow lists allow all registrations except those listed, Deny lists deny all registrations except those listed.B. Allow lists allow all registrations except those listed, Deny lists allow all registrations except those listed.C. Allow lists deny all registrations except those listed, Deny lists allow all registrations except those listed.D. Allow lists deny all registrations except those listed, Deny lists deny all registrations except those listed.


Explanation/Reference:well Explained answer.

QUESTION 13Which statement is correct about the configuration of the call control device?

A. The Cisco TelePresence Management Suite can auto-provision the dial plan between the Cisco VCS and Cisco Unified Communications Manager,using CDP.

B. The Cisco Unified Communications Manager dial plan only supports numeric values.C. The Cisco VCS and Cisco Unified Communications Manager can pass dial plan information between them to create a single directory based on an

H.350 schema.D. The Cisco VCS and Cisco Unified Communications Manager support numeric and URI dialing.



QUESTION 14What needs to be configured for Endpoint A, registered to Cisco Unified Communications Manager, to dial Endpoint B, registered to Cisco VCS?


A. An IPsec VPN tunnel needs to be configured.B. A SIP trunk needs to be configured.C. A Cisco VCS directory needs to be configured.D. A dedicated UCM subscriber needs to be configured for the Cisco VCS.



QUESTION 15How many Cisco VCSs can be in a single cluster?

A. 1B. 2C. 3D. 4E. 5F. 6G. 7H. 8

Correct Answer: FSection: Exploring Advanced VCS FeaturesExplanation

Explanation/Reference:answer is valid.

QUESTION 16In which three areas can the Cisco VCS be configured to use an external policy server? (Choose three.)

A. CLI policyB. interworking configuration pageC. search policyD. call policyE. registration policy


F. Conference FactoryG. Cisco Unified Presence configuration page

Correct Answer: CDESection: Exploring Advanced VCS FeaturesExplanation


QUESTION 17A Cisco VCS has a search rule that uses the pattern string of ([78]\d1\d+|Meet\..*). Which three dial strings will match the search rule? (Choose three.)

A. meet.richardB. 7881000C. Meet.RichardD. 8881888E. 781F. 781.meet.richardG. 881000

Correct Answer: ACGSection: Exploring Advanced VCS FeaturesExplanation


QUESTION 18What two protocols are used in firewall traversal? (Choose two).

A. SIPB. H.239C. H.460.18 & 19D. AssentE. H.264

Correct Answer: CDSection: Exploring Advanced VCS Features


Explanation

Explanation/Reference:

QUESTION 19What does an MCU service prefix of 8 mean for users of a Cisco TelePresence MCU?

A. Any conferences created from an endpoint will be prefixed with 8.B. Any dialed number starting with 8 will be routed to the MCU.C. Any gateway services will be prefixed with an 8.D. Any MCU-created conferences will start with an 8.

Correct Answer: BSection: Deploying Video Conferencing BridgesExplanation

Explanation/Reference:agree with the given answer

QUESTION 20What does an endpoint system use to navigate the Auto Attendant menu on the Cisco TelePresence MCU?

A. FECC and DTMF navigationB. a special remote that came with the Cisco TelePresence MCUC. only FECC, DTMF is not supportedD. web interface of the endpoint

Correct Answer: ASection: Deploying Video Conferencing BridgesExplanation


QUESTION 21What software can you use to customize the banner on the Cisco TelePresence MCU?

A. SSH terminal clientB. web browser


C. WinSCP clientD. customization software


Explanation/Reference:agree with the answer.

QUESTION 22A customer wants to allow users to create ad hoc conferences by dialing the Cisco TelePresence MCU service prefix of 8, followed by a number for theconference. Which global conference settings allow the customer to do this?

A. Media port reservation: Disabled | Incoming calls to unknown conferences or auto attendants:Create new ad hoc conference | Register ad hoc conferences with gatekeeper: On

B. Media port reservation: Enabled | Incoming calls to unknown conferences or auto attendants:Default auto attendant | Register ad hoc conferences with gatekeeper: Off

C. Media port reservation: Enabled | Incoming calls to unknown conferences or auto attendants:Create new ad hoc conference | Register ad hoc conferences with gatekeeper: Off

D. Media port reservation: Disabled | Incoming calls to unknown conferences or auto attendants:Default auto attendant | Register ad hoc conferences with gatekeeper: On


Explanation/Reference:most suitable answer.

QUESTION 23Why would an endpoint stop sending 720p in a call with a Cisco TelePresence MCU?

A. The endpoint Ethernet speed renegotiated at half-duplex.B. The Cisco TelePresence MCU is using video to receive bit rate optimization to request a lower bandwidth.C. Another endpoint joined the conference, which brought the conference rate down.D. Another endpoint failed in its negotiation with the Cisco TelePresence MCU.




QUESTION 24Which command is used to set the IP configuration for a Cisco TelePresence MCU?

A. status <IP address> <netmask> <default GW> <DNS server address>B. xconfigure <IP address> <netmask> <default GW> <DNS server address>C. static <IP address> <netmask> <default GW> <DNS server address>D. set <IP address> <netmask> <default GW> <DNS server address>

Correct Answer: CSection: Deploying Video Conferencing BridgesExplanation


QUESTION 25How do you know that all blades on the Cisco TelePresence MSE 8000 have booted correctly?

A. The logo will light up.B. The lights on the fan tray will turn green.C. The light in the supervisor blade will turn green.D. Alarm lights come on.



QUESTION 26A Cisco TelePresence MCU Auto Attendant does not allow users to set up ad hoc conferences, even though the media port reservation setting is off.What may cause this problem?

A. The streaming option was selected instead of the ConferenceMe? option.B. The global conference setting, auto-attendant, is not set up correctly.


C. The user endpoint does not have MultiSite? installed.D. The auto-attendant has not been set up correctly.

Correct Answer: DSection: Deploying Video Conferencing BridgesExplanation


QUESTION 27Which three methods can an engineer use to upgrade the software on the Cisco TelePresence MCU? (Choose three.)

A. web interfaceB. FTPC. flash driveD. SSHE. serial interfaceF. RMA the unitG. Telnet

Correct Answer: ABCSection: Deploying Video Conferencing BridgesExplanation


QUESTION 28Which three protocols does Cisco TelePresence Server support? (Choose three.)

A. SCCPB. H.323C. H.460D. TIPE. SIP

Correct Answer: BDESection: Deploying Video Conferencing Bridges


Explanation


QUESTION 29When the administrator enables remotely managed mode on the Cisco TelePresence Server, which statement is correct?

A. Cisco TelePresence Conductor can communicate with the TelePresence Server.B. Cisco TMS is able to gather CDR data.C. SNMPv3 is used as a secure communication channel to the management device.D. Cisco Unified Communications Manager can communicate with the TelePresence Server.



QUESTION 30A Cisco 5310 MCU is being configured as an ad hoc conference bridge in Cisco Unified Communications Manager. Which two configuration steps mustbe completed for this to function correctly? (Choose two.)

A. Install the Cisco Unified Communications Manager feature key on the MCU.B. Create a SIP trunk from Cisco Unified Communications Manager to the MCU.C. Enable Media Port Reservation on the MCU.D. Disable H.323 and enable SIP on the MCU.

Correct Answer: CDSection: Deploying Video Conferencing BridgesExplanation


QUESTION 31What is required for Cisco TelePresence Server to communicate with Cisco WebEx, using the PSTN?

A. Cisco TelePresence MCU 5300


B. Cisco 3420 ISDN GatewayC. third-party interop keyD. Web Conferencing feature key

Correct Answer: CSection: Deploying Video Conferencing BridgesExplanation


Topic 5, Deploying TelePresence Content Server

QUESTION 32What is the effect of registering the Cisco TCS with the Cisco VCS using H.323 gateway mode?

A. The Cisco TCS does not support this type of registration.B. An unlimited number of recording aliases can be assigned.C. The Cisco TCS is prevented from making an outbound call to a Cisco MCU.D. The Cisco TCS can traverse calls between SIP and H.323.

Correct Answer: BSection: Deploying TelePresence Content ServerExplanation

Explanation/Reference:answer is confirmed.

QUESTION 33Which of these constitutes a Cisco TCS recording alias?

A. a recording template, a media server configuration, and a call configurationB. a media server configuration and a call configurationC. a recording template and a media server configurationD. a recording template and a call configuration

Correct Answer: ASection: Deploying TelePresence Content ServerExplanation



QUESTION 34Which two statements about Cisco TCS users are true? (Choose two.)

A. Users with the creator role can create their own recording aliases.B. Local users have only limited Cisco TCS permissions.C. Users can be assigned to the Cisco TCS through an Active Directory LDAP server.D. User permissions are based on one of three assignable roles.

Correct Answer: CDSection: Deploying TelePresence Content ServerExplanation


QUESTION 35Which two pieces of troubleshooting information does the Cisco TCS provide? (Choose two.)

A. log messages that can be accessed by the site manager through the CLIB. recording alias processing progressC. error logs that only Cisco TAC can accessD. log messages that can be accessed by the site manager through the web interface

Correct Answer: BDSection: Deploying TelePresence Content ServerExplanation


QUESTION 36What occurs when a conference with eight sites is booked through Cisco TMS?

A. TMS will automatically choose the most appropriate MCU that is available on the network.B. TMS will prompt the engineer to book an MCU on the network.C. TMS will cascade the call by using the built-in MultiSite capabilities of the endpoints.D. TMS will automatically activate Multiway.


Correct Answer: ASection: Exploring TMSExplanation


QUESTION 37Which persistent setting other than system name, E.164 alias, and H.323 ID is configurable for a personal video system?

A. SIP URIB. MAC addressC. serial numberD. IP address



QUESTION 38What is the purpose of the ISDN and the IP zones in Cisco TMS?

A. To configure the neighboring of gatekeepersB. To configure subzones, links, and pipes in gatekeepersC. To display systems correctly in the map modeD. To perform call routing

Correct Answer: DSection: Exploring TMSExplanation

Explanation/Reference:to the point answer.

QUESTION 39All Cisco TMS users and administrators are members of which default group?


A. usersB. video unit administratorC. site administratorD. administrator



QUESTION 40Which is the recommended method for backing up and restoring the SQL database?

A. The TMS Tools application on the Cisco TMS serverB. The SQL command-line editorC. Microsoft SQL Server Manager Studio ExpressD. SQL command-line scripting

Correct Answer: CSection: Exploring TMSExplanation

Explanation/Reference:Excellent answer.

QUESTION 41What happens if Cisco TelePresence VCS Control only has an 'AnyIPAddress' search rule configured in the traversal zone?

A. All calls from the Expressway won't workB. All calls to the Expressway won't workC. Calls dialed with an alias from the Expressway won't workD. Calls dialed with an alias to the Expressway won't work

Correct Answer: DSection: Exploring TMSExplanation



answer is absolutely Okay.

QUESTION 42Refer to exhibit.

Exhibit:

You started a conference without Cisco TMS and you want to monitor the conference. Which setting will enable you to monitor the conference?


A. Show MCUsB. Show Ad HocC. Expand the Active folderD. Expand the Reservations folderE. Add to Watch List

Correct Answer: BSection: Exploring TMSExplanation


QUESTION 43On which three operating systems can you install Cisco TMS? (Choose three.)

A. Windows Server 2003 SP1 or later, 32-bitB. Ubuntu 12.04 LTSC. RHELD. Windows Server 2008 SP2 or later, Standard 32-bit and 64-bitE. Windows Server 2008 R2 SP1 or later, Standard 64-bitF. Windows Server 2003 R2G. SolarisH. CentOS

Correct Answer: ADESection: Exploring TMSExplanation


QUESTION 44The following Cisco TMS warning is displayed. "No route possible between X and Y." What does this warning indicate?

A. One of the endpoints is not registered on the Cisco TP VCS.B. There is a restriction that does not allow calls between zones.C. TMS cannot find one of the selected systems.


D. Gateway is not available.

Correct Answer: BSection: Exploring TMSExplanation


QUESTION 45What are the system components of provisioning?

A. Cisco VCS, Cisco TMS, and Cisco JabberB. Cisco VCS and Cisco TMSC. Cisco VCS, Cisco TMS, and Cisco TMSPED. Cisco VCS, Cisco Unified CM, Cisco TMSPEE. Cisco VCS, Cisco Unified CM, Cisco TMS, and Cisco TMSPE

Correct Answer: CSection: ProvisioningExplanation


QUESTION 46Which four licenses and option keys are required in order to provision and register a Cisco Jabber Video for TelePresence client? (Choose four.)

A. Cisco TMS: Jabber Video capacity option keyB. Cisco TMS: direct managed system licensesC. Cisco Jabber: user licensesD. Cisco VCS: Device Provisioning option keyE. Cisco VCS: Registration license

Correct Answer: ABDESection: ProvisioningExplanation



QUESTION 47What are the minimum required configuration settings for the provisioning Root folder?

A. phone book URI, presence server URI, SIP server addressB. Maximum In bandwidth, Maximum Out bandwidth, SIP server addressC. network DNS domain name, Maximum In bandwidth, Maximum Out bandwidthD. network IPv4 address, network DNS domain name, SIP server address

Correct Answer: ASection: ProvisioningExplanation

Explanation/Reference:confirmed answer.

QUESTION 48Which three directory services can import Cisco TMS users? (Choose three.)

A. Active DirectoryB. Active Directory with Kerberos (Secure AD)C. Novell eDirectoryD. Lightweight Directory Access Protocol

Correct Answer: ABDSection: ProvisioningExplanation

Explanation/Reference:answer is modified.

QUESTION 49If provisioning replication fails for any reason, what should be done to determine the cause of the failure?

A. Re-install the Cisco Jabber Video client and try again.B. Run all diagnostic tests on the TMS PE Diagnostics page.C. Capture Cisco TelePresence Jabber Video logs and find the problem.D. Run a Wireshark trace on the communication between the Cisco Jabber Video client and the Cisco VCS.

Correct Answer: B


Section: ProvisioningExplanation

Explanation/Reference:valid answer.

QUESTION 50Which option is related to the error "Unable to communicate with the TMS Provisioning Extension service"?

A. The correct option key is not installed.B. HTTPS is not configured.C. The certificate is invalid.D. Cisco TMSPE service needs to be restarted or is not running.

Correct Answer: DSection: ProvisioningExplanation

Explanation/Reference:Okay.

QUESTION 51Which three endpoints are provisioned by Cisco TMSPE? (Choose three.)

A. Cisco TelePresence System MX SeriesB. Cisco TelePresence System EX SeriesC. Cisco Unified IP Phone 9971D. Cisco Unified IP Phone 7960E. Cisco TelePresence System CTS 500

Correct Answer: ABESection: ProvisioningExplanation


QUESTION 52How many conferencing bridges can a single full-capacity Cisco TelePresence Conductor support?


A. 1B. 10C. 15D. 25E. 30F. 104G. 500H. 2400

Correct Answer: ESection: Examining TelePresence ConductorExplanation

Explanation/Reference:complete answer.

QUESTION 53Which two of the following are supported ways to install Cisco TelePresence Conductor? (Choose two.)

A. Purchase the appliance with the application already installed.B. Install the application on Windows 2008.C. Install the application on a Cisco supported VMware ESXi host.D. Enable Cisco TelePresence Conductor under the Application menu in the Cisco VCS.

Correct Answer: ACSection: Examining TelePresence ConductorExplanation

Explanation/Reference:answer is true.

QUESTION 54Which configuration step must be completed for Cisco TelePresence Conductor to communicate with a Cisco TelePresence Server?

A. Create a bridge pool and place the TelePresence Server in that pool.B. Enable SNMP on the TelePresence Server.C. Set the TelePresence Server to locally managed mode.D. Create a unique username and password on the TelePresence Server with administrator access only.


Correct Answer: ASection: Examining TelePresence ConductorExplanation

Explanation/Reference:answer is justified.

QUESTION 55When configuring a conference alias for a meeting type template, which role should be applied?

A. Video UserB. ChairmanC. AdministratorD. ParticipantE. Attendee

Correct Answer: DSection: Examining TelePresence ConductorExplanation

Explanation/Reference:answer is up to dated.

QUESTION 56Which mechanism does the Cisco TelePresence Conductor use to communicate with the call control device?

A. It sends keepalive messages until the H.245 negotiations are completed.B. It provides a secure FTP channel to use for data transfer.C. When Cisco TelePresence Conductor receives the signaling for the call, it uses CPL.D. A SIP connection will use the B2BUA of Cisco TelePresence Conductor.



QUESTION 57In the Cisco TelePresence Conductor web pages, which logs can you view?


A. system log, event log, and CDR logB. system log and event logC. event log and configuration logD. system log, event log, configuration log, and CDR log

Correct Answer: CSection: Examining TelePresence ConductorExplanation

Explanation/Reference:particular answer.

QUESTION 58A user complains that their rendezvous conference fails to connect. What should the administrator check on the Cisco TelePresence Conductor?

A. NTP is working correctly.B. The auto-dialed participant is defined for that user.C. H.323 is enabled on the System Administration page.D. The conference bridge has an Active status.


Explanation/Reference:answer is accepted.

QUESTION 59Which menu on the Cisco TelePresence VCS should you refer to in order to verify that an endpoint has registered?

A. ApplicationB. StatusC. SecurityD. Configuration

Correct Answer: BSection: Mix questionsExplanation



exact answer.

QUESTION 60What should you use to back up the configuration of a Cisco TelePresence VCS (X5 software or above)?

A. the backup and restore toolB. the serial port and the backup commandC. the serial port and the xbackup commandD. SCP to download the file called "backup.tft"

Correct Answer: ASection: Mix questionsExplanation

Explanation/Reference:answer is genuine.

QUESTION 61Which option is related to the error "Unable to communicate with the TMS Provisioning Extension service"?

A. The correct option key is not installed.B. HTTPS is not configured.C. The certificate is invalid.D. Cisco TMSPE service needs to be restarted or is not running.

Correct Answer: DSection: Mix questionsExplanation


QUESTION 62What will happen if the local zone on a Cisco TelePresence VCS does not have a search rule?

A. Calls to locally registered devices will fail.B. Calls from locally registered devices will fail.C. Calls to externally registered devices will fail.D. Calls from externally registered devices will fail.



Explanation/Reference:answer is real.

QUESTION 63How can you independently restore the default links on a Cisco TelePresence VCS?

A. with an xcommand from the APIB. by performing a factory resetC. from the bandwidth configuration section of the web interfaceD. by performing a reboot


Explanation/Reference:answer is definite.

QUESTION 64Which feature must be enabled on the Cisco TelePresence VCS in order to monitor the status of non-presence-enabled clients?

A. Presence User AgentB. interworkingC. FindMe?D. LDAP


Explanation/Reference:reliable answer.

QUESTION 65What information about a change can you determine from the configuration log on a Cisco TelePresence VCS?

A. the E.164 alias of the person who made the change


B. the IP SIP address of the person who made the changeC. the H.323 ID of the person who made the changeD. the username of the person who made the change

Correct Answer: DSection: Mix questionsExplanation



A. CLI policyB. interworking configuration pageC. search policyD. call policyE. registration policyF. Conference FactoryG. Cisco Unified Presence configuration page

Correct Answer: CDESection: Mix questionsExplanation



A. CLI policyB. interworking configuration pageC. search policyD. call policyE. registration policyF. Conference FactoryG. Cisco Unified Presence configuration page


Correct Answer: CDESection: Mix questionsExplanation


QUESTION 68After you change the IP address of a Cisco TelePresence Codec C90, you are unable to use Telnet or a browser to connect to that address. However,you are able to use ping to connect to the new address. What are the two possible causes? (Choose two.)

A. The configuration failed and there is another device with the same address that responds to the ping.B. The codec disabled the Telnet and HTTP services after the IP address change.C. The codec needs to reboot after the IP address change in order to bind the services to the new address.D. The gatekeeper configuration failed and you need to set up the gatekeeper address and the discovery type again.

Correct Answer: ACSection: Examining EndpointsExplanation

Explanation/Reference:answer is authentic.

QUESTION 69The camera remote control is not responding. What can an engineer check in order to determine if the camera remote control or the system is causingthe problem?

A. The monitor is on the right channel.B. The switch inside the remote control is switched on.C. The light flashes on the camera when a key is pressed.D. The batteries are correctly placed within the remote.

Correct Answer: CSection: Examining EndpointsExplanation

Explanation/Reference:to the point answer.

QUESTION 70


Which two items should you check on the local Cisco TelePresence C Series Codec when audio is not received? (Choose two.)

A. The microphone is plugged in.B. The microphone is turned on in the menus.C. The volume on the monitor is turned up.D. The far end is sending audio.

Correct Answer: CDSection: Examining EndpointsExplanation

Explanation/Reference:particular answer.

QUESTION 71You are having trouble upgrading the Cisco TelePresence C Series Codec system using the web interface. How else might you attempt the upgrade?

A. Use the API command interface.B. Use the HTTP or HTTPS Interface.C. Use the menus and a USB drive.D. Use the remote ISDN connection.

Correct Answer: BSection: Examining EndpointsExplanation

Explanation/Reference:answer is outclass.

QUESTION 72How many digital video inputs does a Cisco TelePresence Codec C40 have?

A. 2B. 0C. 1D. 3E. 5

Correct Answer: DSection: Examining Endpoints


Explanation

Explanation/Reference:Best answer.

QUESTION 73What will happen if the local zone on a Cisco TelePresence VCS does not have a search rule?

A. Calls to locally registered devices will fail.B. Calls from locally registered devices will fail.C. Calls to externally registered devices will fail.D. Calls from externally registered devices will fail.

Correct Answer: ASection: Exploring Basic Call ControlExplanation

Explanation/Reference:answer is real.

QUESTION 74How can you independently restore the default links on a Cisco TelePresence VCS?

A. with an xcommand from the APIB. by performing a factory resetC. from the bandwidth configuration section of the web interfaceD. by performing a reboot


Explanation/Reference:answer is definite.


A. the backup and restore toolB. the serial port and the backup command


C. the serial port and the xbackup commandD. SCP to download the file called "backup.tft"




A. the backup and restore toolB. the serial port and the backup commandC. the serial port and the xbackup commandD. SCP to download the file called "backup.tft"



QUESTION 77Which Cisco TelePresence C Series Codec command will move the on-screen display to monitor output 4?

A. configuration video osd output: 4B. xconfiguration video osd output: 4C. command video osd output: 4D. xcommand video osd output: 4

Correct Answer: BSection: Mix questionsExplanation

Explanation/Reference:answer is reliable.


QUESTION 78Which user groups on the Cisco TelePresence VCS are available for LDAP integration?

A. administration and FindMeTM usersB. administration and supervisor usersC. supervisor users and client usersD. client users and FindMe users



QUESTION 79Which Cisco TelePresence C Series Codec command will move the on-screen display to monitor output 4?

A. configuration video osd output: 4B. xconfiguration video osd output: 4C. command video osd output: 4D. xcommand video osd output: 4

Correct Answer: BSection: Examining EndpointsExplanation

Explanation/Reference:answer is reliable.

QUESTION 80Which menu on the Cisco TelePresence VCS should you refer to in order to verify that an endpoint has registered?

A. ApplicationB. StatusC. SecurityD. Configuration

Correct Answer: BSection: Examining Endpoints


Explanation


QUESTION 81Where do you find the Clusterwide Domain Configuration?

A. System > Enterprise ParametersB. System > Enterprise Phone ConfigurationC. Device > TrunkD. User Management > SIP Realm


Explanation/Reference:ALL right.

QUESTION 82Where do you change the Maximum Session Bit Rate for Video Calls?

A. Device > TrunkB. System > LocationC. Media Resources > Media Resource GroupD. System > Enterprise ParametersE. System > Region

Correct Answer: ESection: Exploring Basic Call ControlExplanation


QUESTION 83How many peers can you configure per neighbor zone?

A. 1


B. 2C. 3D. 4E. 5F. 6G. 8H. 12

Correct Answer: ESection: Exploring Basic Call ControlExplanation


QUESTION 84When trunking a Cisco VCS to Cisco Unified Communications Manager, what value should the

A. 323 mode be set to?B. OnC. OffD. AutoE. Best Effort



QUESTION 85Calls from Cisco VCS registered endpoints are not reaching Cisco Unified Communications Manager registered endpoints. Where should you look onCisco VCS to troubleshoot?

A. NTP settingsB. Search historyC. SNMP trap logsD. Cisco Unified Presence configuration




QUESTION 86Endpoints can be placed into different Cisco TelePresence VCS (X5 or above) subzones according to which of the following?

A. aliases or IP addressesB. aliases and MAC addressesC. IP addresses onlyD. aliases, MAC addresses, and IP addresses


Explanation/Reference:trustful answer.

QUESTION 87Which Cisco TelePresence VCS function can you use to control the speed of a call within the same subzone?

A. linksB. pipesC. per-call bandwidthD. default bandwidth



QUESTION 88Two Cisco TelePresence VCSs are not configured with DNS. What are the consequences of only setting up one neighbor zone?


A. Calls can only be made in one direction.B. All searches will fail between neighbors.C. Calls are not possible between neighbors.D. Registrations are not possible.



QUESTION 89What does the hop count setting on the firewall traversal configuration limit on the Cisco TelePresence VCS?

A. The number of Cisco TelePresence VCSs that a call can travel through.B. The number of firewalls that a call can travel through.C. The number of routers that a call can travel through.D. The number of switches that a call can travel through.


Explanation/Reference:valid answer.

QUESTION 90When can a transform rule be applied on a Cisco TelePresence VCS?

A. searches, inter-zone and inter-subzone callsB. searches and inter-zone callsC. searches and inter-subzone callsD. inter-zone and inter-subzone calls




QUESTION 91How will FindMe help a user working from either home or the office?

A. Anyone can contact the user using a single identity.B. Users can locate any individual in the company using the address book.C. Users can change their system names according to their current location.D. Anyone can contact the user by giving each endpoint the same configuration.



QUESTION 92Which Cisco TelePresence VCS function is used to enable H.323 endpoints to connect to SIP endpoints?

A. zonesB. subzonesC. TURND. interworking



cisco.pass4sure.500 006.v2015!04!05.by.janette.92q unprotected

Documents