cl ml ed dc - spinnercorbin-russwin-hardware.com/overview_-_all_products.pdfcl3352 classroom...
TRANSCRIPT
Architectural HardwareProduct Guide
Condensed Catalog
Cylinders and Keys
Cylindrical Locks
Mortise Locks
Exit Devices
Door Closers
Cylinders andKeys
CylindricalLocks
MortiseLocks
ExitDevices
DoorClosers
CL3352 Classroom Intruder Lock . . . . . .Page 17
Improving upon standard classroom locksets, the CL3352 is keyed onboth sides, allowing locking of the outside lever from either inside or out.Exit is always possible, and the "anti-panic" feature maintains safety andsecurity by keeping the outside lever locked if the inside lever is activated.
ML2000 Vandal Resistant Trim . . . . . . . . .Page 14
Designed for high-traffic commercial, industrial, institutional andgovernment buildings that require a greater degree of security and vandalresistance not found on other mortise trims.
Corbin Russwin Product Guide.2
Featured Products
Delayed Egress Exit Device . . . . . . . . . . . Page 53
The Corbin Russwin Delayed Egress Exit Device for the ED4000/ED5000series provides access control, increased security and consistent aestheticsto rim, SecureBolt™, concealed vertical rod and mortise exit devices.
Key Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
Patented High Security Cylinders
Pyramid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Mortise Locksets
ML2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Mortise Lever Trims
ML2000 Vandal Resistant Mortise Trim. . . . . . Page 14
Decorative Mortise Lever Trims
Vineyard Collection . . . . . . . . . . . . . . . . . . . . . Page 15
Extra Heavy Duty Cylindrical Lever
CL3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 16
Heavy Duty Cylindrical Lever Locksets
CL3300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 17
Heavy Duty Cylindrical Lever Locksets
CL3600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 18
Standard Duty Key-In-Lever Locksets
CL3900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 19
Light/Medium Duty Lever Locksets
CL3700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 20
Heavy Duty Cylindrical Knob Locksets
CK4200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 24
Standard Duty Cylindrical Knob Locksets
CK4400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 25
Light/Medium Duty Knob Locksets
CK4700 Series. . . . . . . . . . . . . . . . . . . . . . . . . Page 26
Unit Locksets
UT5200 Series . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Padlocks, Deadlocks, Push-Pull . . . . . . . . . . . Page 30
Crossbar Exit Device
ED6000 Series. . . . . . . . . . . . . . . . . . . . . . . . . Page 32
Crossbar Exit Device
ED7000 Series. . . . . . . . . . . . . . . . . . . . . . . . . Page 33
Pushbar Exit Device
ED8000 Series. . . . . . . . . . . . . . . . . . . . . . . . . Page 34
Pushbar Exit Device
ED5000 Series. . . . . . . . . . . . . . . . . . . . . . . . . Page 35
Pushbar Exit Device
ED4000 Series. . . . . . . . . . . . . . . . . . . . . . . . . Page 37
Door Closers
DC2000/DC3000 Series . . . . . . . . . . . . . . . . . Page 38
Door Closers
DC4600 Series. . . . . . . . . . . . . . . . . . . . . . . . . Page 40
Electrified Products . . . . . . . . . . . . . . . . . . . . . Page 44
Since 1839, Corbin Russwin has manufactured safe, secure and durable hardware to meet America’s building needs. In today’s multi-room facilities, where security and code compliance hardware are foremost in the minds of architects andbuilders, Corbin Russwin continues to fulfill both the functional and aesthetic requirements of the construction industry.
Architecturally, Corbin Russwin is advancing into the next century and beyond. The practical day-to-day workloadthat architectural hardware products must endure is the performance standard on which we’ve built our reputation.
Corbin Russwin Product Guide.3
Index
Corbin Russwin Product Guide.4
Applications
Key Systems
To provide the desired level ofsecurity, even the finestarchitectural hardware requires aproperly designed andmaintained master key system.
The keying system is the“software” of a building's security.As shown in the schematic below,it turns each hardware productinto an access control device.
ApplicationsThe choice of cylindermechanism must be plannedtogether with the keying system.The variety of mechanismsavailable from Corbin Russwinoffers the right balance ofsecurity, convenience andexpansion capability for every job.
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes IC
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes IC
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Yes Yes Yes Yes IC Yes Yes Yes Yes Yes Yes
Yes Yes IC Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Yes Yes Yes Yes
Yes Yes Yes Yes Yes Yes
Corbin Russwin Product Guide.5
Functions
Pyramid Cylinders
Visual Key Control
Concealed Key Control
Construction MK
7-Pin Cylinder
Security Cylinder
Interchangeable Core
Security IC
Master Ring Cylinder
Blockout Function
ApplicationsEspecially recommended for installationsrequiring superior protection againstpicking, drilling and other surreptitiousentry. Ideally suited for Educational andHealthcare facilities, Industrial andCommercial buildings.
DL31
00 D
eadl
ocks
Feature ML2
000
Mor
tise
Lock
sM
L200
0HS
Mor
tise
Lock
sCL
3200
Sec
urity
Bol
tCL
3300
Lev
er L
ocks
CL36
00 L
ever
Loc
ksCL
3700
Lev
er L
ocks
CK42
00 K
nob
Lock
sCK
4400
Kno
b Lo
cks
CK47
00 K
nob
Lock
sUT
5200
Uni
t Loc
ksPu
shba
r Exi
t Dev
ices
Cros
sbar
Exi
t Dev
ices
DL21
00 D
eadl
ocks
DL30
00 D
eadl
ocks
DL40
00 D
eadl
ocks
PL50
00 P
adlo
cks
Exclusions apply to certain functions and trims. Consult individual catalog sections for availability.
CL39
00 L
ever
Loc
ks
Without Key With Key
Cylinder Features
Pyramid High Security Cylinders
Corbin Russwin Product Guide.6
Applications/Features
ML2000 Series
ApplicationsDesigned for high-traffic commercial, institutional,industrial and government buildings where securityis of the greatest concern.
Advantages• Patented (6,349,982) quick-reversible feature
enables users to reverse hands without disassembling lock case.
• Meets or exceeds ANSI Operational & Security Grade 1 requirements.
• Provides life safety and security in a single door prep, saving the additional cost of a deadlock.
• Through-bolted trim designs for proper alignment and increased security.
• Trim designs compatible with other Corbin Russwincylindrical, pre-assembled and exit device trims.
• Can be used with new or existing Corbin Russwin key systems and those of most other manufacturers.
Patented (6,349,982)latchtail enables easyhanding changes
Heavy gauge internalparts providesecurity, reliability,and durability
Armored frontconceals lockmounting screwsand one-pieceheavy gauge steelfront
Heavy-duty 3/4"throw latchbolt withstainless steel insertprovides positivesecure latching
1" throw, one-piecedeadbolt meetssecurity Grade 1
FeaturesHandingHanded; quick reversible.
Door Thickness1-3/4" (44mm)- standard.
Backset2-3/4" (70mm).
Lock CaseHeavy gauge chrome-plated steel, 5-7/8" (149mm) x 4" (102mm) x15/16" (24mm).
FrontHeavy gauge steel, 8" (203mm) x 1-1/4" (32mm) x 3/32" (2mm).Accommodates flat doors and doorsbeveled 1/8" (3mm) in 2" (51mm).
Latchbolt 2-piece mechanical with anti-frictioninsert, 5/8" (16mm) x 1" (25mm)x3/4" (19mm) throw.
DeadboltOne-piece stainless steel, 19/32"(15mm) x 1-1/4" (32mm) x 1" (25mm)throw.
StrikeWrought brass or bronze, ANSIstraight lip standard, 4-7/8" (124mm)x 1-1-1/4" (32mm) x 1-1/8" (29mm)lip to center.
CylinderBrass, 6-pin, L4 keyway, 0-bittedstandard.
Keying Features AvailableMaster keyingConstruction master keyingVisual key controlConcealed key controlPlug only to show (concealed shell)7-pinPyramidSecurityInterchangeable core (IC)Pyramid ICSecurity ICMaster ring cylinderBlockout cylinderFlex head cylinder
KeysTwo nickel-silver standard.
WarrantyFive-year limited. One-year warrantyon finish.
Certification/ComplianceANSIMeets A156.13 Series 1000,Operational and Security Grade 1. Meets A117.1 Accessibility Code ofthe ADA.
FederalMeets FF-H-106C.
California State Reference Code(Formerly Title 19, California State FireMarshal Standard)
All levers with returns comply; leversreturn to within 1/2" (13mm) of doorface.
UL / ULCAll locks listed for A label and lesserclass single doors, 4' x 10' single or 8' x 10' pair. Letter F and UL symbolon armored front indicate listing.
FinishesBHMA 605, 606, 611, 612, 613, 625,626, 629, 630.
Corbin Russwin Product Guide.7
Applications/Features
ApplicationsDesigned for high-traffic commercial, industrial,institutional and government buildings that require agreater degree of security than traditional mortiselocksets provide.
Advantages• Flush-mounted security cylinder with pick-resistant
interlocking pins.• Cast escutcheons and knobs double throughbolted.• Security Torx® screws, standard.• Armored front to protect against tampering.
Cast knobs andescutcheons,tapered to deflecthammer blows
Heavy duty anti-friction latchstandard
Security torx screwsstandard, through-bolted from bothsides
Flush mounted 6-pin securitycylinder standard
Stainless steel 1”(25mm) throwdeadbolt meetsSecurity Grade 1
Heavy gaugeinternal parts
One-piece, corrosion-resistant heavy gaugesteel front
ML2000HS Series
FeaturesHandingHanded; quick reversible.
Door Thickness1-3/4" (44mm)- standard.
Backset2-3/4" (70mm).
Lock CaseHeavy gauge chrome plated steel, 5-7/8" (149mm) x 4" (102mm) x15/16" (24mm).
FrontHeavy gauge steel, 8" (203mm) x 1-1/4" (32mm) x 3/32" (2mm).Accommodates flat doors and doorsbeveled 1/8" (3mm) in 2" (51mm).
Latchbolt2-piece mechanical with anti-frictioninsert, 5/8" (16mm) x 1" (25mm) x3/4" (19mm) throw.
DeadboltOne-piece stainless steel, 19/32"(15mm) x 1-1/4" (32mm) x 1"(25mm) throw.
HubKnob: stainless steel, 3/8" (9.5mm).
StrikeWrought brass or bronze, ANSIstraight lip standard, 4-7/8" (124mm)x 1-1/4" (32mm) x 1-1/8" (29mm) lipto center.
CylinderBrass, 6-pin security, L4 keywaystandard.
Keying Features Available Master keyingConcealed key control7-pin conventional cylinderPyramid Security Interchangeable core (IC)Pyramid ICSecurity ICBlockout cylinder
KeysTwo nickel-silver standard.
WarrantyFive-year limited. One-year warrantyon finish.
Certification/Compliance
ANSIMeets A156.13 Series 1000, Grade 1.
FederalMeets FF-H-106C.
UL/ULCAll locks listed for A label and lesserclass single doors, 4' x 10' single or 8' x 10' pair. Letter F and UL symbolon armored front indicate listing.
FinishesBHMA 605, 606, 611, 612, 613, 625,626.
Corbin Russwin Product Guide.8
Lockset Functions
ML2000 Series
Deadlock
Deadlock
Classroom
ClassroomDeadlock
Passageor Closet
PrivacyBedroom orBathroom
Store Door
Entrance orStoreroom
Hotel orMotel
ML2011
ML2012
ML2013
ML2017
ML2010
ML2020
ML2022
ML2024
ML2029
Series/ ANSI No.Outside Inside Function Type Series 1000 Function Description
- Latchbolt by grip* either side.- Deadbolt by key outside or by thumbturn lever inside.
- Latchbolt by grip inside and by guest key or master key outside.- Outside grip always rigid.- Deadbolt by thumbturn lever inside or by emergency key outside. (ML2029)- Inside grip simultaneously retracts latchbolt and deadbolt. (ML2029)- Emergency key shuts out all other keys. (ML2029)- Emergency key throws deadbolt, shutting out all other keys and preventing exit from inside. (ML2029HS)- Auxiliary latch deadlocks latchbolt.
- Deadbolt by key outside.- No inside operation.
- Deadbolt by key either side.
F18
F16
F17
—
F01
F02
F14
F21
F15
- Deadbolt by key outside or by thumbturn lever inside.
- Deadbolt by key outside.- Thumbturn lever inside retracts deadbolt only; will not project deadbolt.
- Latchbolt by grip either side.- Both grips always free.
- Latchbolt by grip* either side.- Deadbolt by key either side.
Indicates function availability in ML2000HS. Indicates rigid grip.
HS
VR
HS
VR
HS
VR
HS
VR
HS
VR
HS VR Indicates function available in Vandal Resistant Trim (ML2000VR).
- Latchbolt by grip* either side.- Deadbolt by thumbturn lever inside or by emergency release tool outside.
VR
HS
VR
VR
VR
* When lever handles are furnished, both outside and inside are locked when deadbolt is projected.
Corbin Russwin Product Guide.9
Lockset Functions
ML2000 Series
* When lever handles are furnished, both outside and inside are locked when deadbolt is projected.** When so specified, change key will be furnished to operate inside cylinder.
Series/ ANSI No.Outside Inside Function Type Series 1000 Function Description
- Latchbolt by grip either side.- Deadbolt by key outside or by thumbturn lever inside.- Inside grip simultaneously retracts latchbolt and deadbolt.
- Latchbolt by grip either side, unless outside grip is locked by toggle-action stop or by projection of deadbolt.
- Deadbolt by key outside or by thumbturn lever inside.- Inside grip simultaneously retracts latchbolt and deadbolt; outside grip remains locked.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side, except when outside is locked by thumbturn inside.- Operating inside grip or closing door unlocks outside grip.- Key outside retracts latch at all times, even if thumbturn is held in locked position.- Auxiliary latch deadlocks latchbolt.
- Grip acts as pull only; no operation.
- Grips act as pulls only; no operation.
Dormitory,Entrance orStoreroom
Apartmentor
Dormitory
InstitutionalPrivacy
ClassroomSecurity
ClassroomSecurity
HalfDummy
Trim
FullDummy
Trim
F13
F12
—
—
—
—
—
ML2065
ML2067
ML2069
ML2072
ML2075
ML2050
ML2070
- Latchbolt by lever from either side unless outside lever is locked by projection of deadbolt.- Deadbolt thrown by key from either side.- Inside lever simultaneously retracts latchbolt and deadbolt; outside lever remains locked.- Retracting latchbolt by key unlocks outside lever.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by lever from either side unless outside lever is locked by projection of deadbolt.- Deadbolt thrown by outside key or inside thumbturn.- Inside lever simultaneously retracts latchbolt and deadbolt; outside lever remains locked.- Retracting latchbolt by thumbturn unlocks outside lever.- Auxiliary latch deadlocks latchbolt.
Indicates function availability inML2000HS.
Indicates function available in VandalResistant trim (ML2000VR).
Indicates rigid grip.
HS
VR
HS
VR
VR
VR
HS
VR
VR
HS
Corbin Russwin Product Guide.10
Lockset Functions
ML2000 Series
* When lever handles are furnished, both outside and inside are locked whendeadbolt is projected.
** When so specified, change key will be furnished to operate inside cylinder.
Series/ ANSI No.Outside Inside Function Type Series 1000 Function Description
- Latchbolt by grip either side.- Deadbolt by key outside or by thumbturn lever inside.- Inside grip simultaneously retracts latchbolt and deadbolt.
- Latchbolt by grip either side, unless outside grip is locked by toggle-action stop or by projection of deadbolt.
- Deadbolt by key outside or by thumbturn lever inside.- Inside grip simultaneously retracts latchbolt and deadbolt; outside grip remains locked.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side, except when outside is locked by thumbturn inside.- Operating inside grip or closing door unlocks outside grip.- Key outside retracts latch at all times, even if thumbturn is held in locked position.- Auxiliary latch deadlocks latchbolt.
- Grip acts as pull only; no operation.
- Grips act as pulls only; no operation.
Dormitory or Entrance
Apartmentor
Dormitory
InstitutionalPrivacy
ClassroomSecurity
ClassroomSecurity
HalfDummy
Trim
FullDummy
Trim
F13
F20
—
—
—
—
—
ML2065
ML2067
ML2069
ML2072
ML2075
ML2050
ML2070
- Latchbolt by lever from either side unless outside lever is locked by projection of deadbolt.- Deadbolt thrown by key from either side.- Inside lever simultaneously retracts latchbolt and deadbolt; outside lever remains locked.- Retracting latchbolt by key unlocks outside lever.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by lever from either side unless outside lever is locked by projection of deadbolt.- Deadbolt thrown by outside key or inside thumbturn.- Inside lever simultaneously retracts latchbolt and deadbolt; outside lever remains locked.- Retracting latchbolt by key unlocks outside lever.- Auxiliary latch deadlocks latchbolt.
Indicates function availability in ML2000HS.
Indicates rigid grip.
HS
VR
HS
VR
VR
VR
HS VR
VR
HS
Indicates function available in Vandal Resistant trim(ML2000VR).
Corbin Russwin Product Guide.11
Applications/Features
ML2000 Series
LWALWBLWF
Lever: WroughtRose: Wrought Lever: WroughtRose: Cast Lever: WroughtRose: Cast
Lustra
2-1/4(57)
5-1/8(130)
2-1/2(64)
Complies with codes requiring 1/2 " (13mm) lever returnBrass, bronze, stainless steelDoor Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm)
LSALSBLSf
Lever: CastRose: Wrought Lever: CastRose: Cast Lever: CastRose: Cast
LWMLSM
Lever: WroughtEscutcheon: Wrought Lever: CastEscutcheon: Wrought
5-1/8(130)
2-1/4(57)
2-1/2(64)
7-1/2(190)
LWNLSN
Lever: WroughtEscutcheon: Wrought Lever: CastEscutcheon: Wrought
LWPLSP
Lever: WroughtEscutcheon: Wrought Lever: CastEscutcheon: Wrought
5-1/8(130)
2-1/4(57)
2-1/2(64)
7-1/2(190)
LSR Lever: CastEscutcheon: Cast
RWARWBRWF
Lever: WroughtRose: Wrought Lever: WroughtRose: Cast Lever: WroughtRose: Cast
Regis
2-1/4(57)
5-1/8(130)
2-1/2(64)
Brass, bronze, stainless steelDoor Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm)
RSARSBRSF
Lever: CastRose: Wrought Lever: CastRose: Cast Lever: CastRose: Cast
RWMRSM
Lever: WroughtEscutcheon: Wrought Lever: CastEscutcheon: Wrought
5-1/8(130)
2-1/4(57)
2-1/2(64)
7-1/2(190)
RWNRSN
Lever: WroughtEscutcheon: Wrought Lever: CastEscutcheon: Wrought
RWPRSP
Lever: WroughtEscutcheon: Wrought Lever: CastEscutcheon: Wrought
5-1/8(130)
2-1/4(57)
2-1/2(64)
7-1/2(190)
RSR Lever: CastEscutcheon: Cast
CSACSBCSF
Lever: CastRose: Wrought Lever: CastRose: Cast Lever: CastRose: Cast
Citation
2-1/4(57)
4-3/8(111)2-5/8
(67)
Brass, bronze, stainless steelDoor Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm)
CSM Lever: CastEscutcheon: Wrought
2-5/8(67)
4-3/8(111)
2-1/4(57)
7-1/2(190)
CSN Lever: CastEscutcheon: Wrought
CSP Lever: CastEscutcheon: Wrought
2-1/4(57)
7-1/2(190)
2-5/8(67)
4-3/8(111)
4-3/8(111)
1-5/8(41)
7(178)
2-5/8(67)
CSR Lever: CastEscutcheon: Cast 2-5/8
(67)
4-3/8(111)
1-3/4(44)
8-1/2(216)
All “F” roses = 2-7/8" (73mm) diameter cast All “F” roses = 2-7/8" (73mm) diameter cast All “F” roses = 2-7/8" (73mm) diameter cast
Corbin Russwin Product Guide.12
Applications/Features
ML2000 Series
NSANSBNSF
Lever: CastRose: Wrought Lever: CastRose: Cast Lever: CastRose: Cast
Newport
2-1/4(57)
4-13/16(122)
2-5/8(67)
Complies with codes requiring 1/2 " (13mm) lever returnBrass, bronze, stainless steelDoor Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm)
NSM Lever: CastEscutcheon: Wrought
4-13/16(122)
2-5/8(67)
2-1/4(57)
7-1/2(190)
NSN Lever: CastEscutcheon: Wrought
NSP Lever: CastEscutcheon: Wrought
4-13/16(122)
2-1/4(57)
7-1/2(190)
2-5/8(67)
4-13/16(122)
2-5/8(67)
1-5/8(41)
7(178)
4-13/16(122)
2-5/8(67)
1-3/4(44)
8-1/2(216)
ASAASBASF
Lever: CastRose: Wrought Lever: CastRose: Cast Lever: CastRose: Cast
Armstrong
2-1/4(57)
2-5/8(67)
4-1/2(114)
Complies with codes requiring 1/2 " (13mm) lever returnBrass, bronze, stainless steelDoor Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm)
ASM Lever: CastEscutcheon: Wrought
4-1/2(114)
2-5/8(67)
2-1/4(57)
7-1/2(190)
ASN Lever: CastEscutcheon: Wrought
ASP Lever: CastEscutcheon: Wrought
4-1/2(114)
2-1/4(57)
7-1/2(190)
2-5/8(67)
4-1/2(114)
2-5/8(67)
1-5/8(41)
7(178)
4-1/2(114)
1-3/4(44)
8-1/2(216)
2-5/8(67)
DSADSBDSF
Lever: CastRose: Wrought Lever: CastRose: Cast Lever: CastRose: Cast
Dirke
2-1/4(57)
2-11/16(68)
4-1/2(114)
Brass, bronze, stainless steelDoor Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm)
DSM Lever: CastEscutcheon: Wrought
2-11/16(68)
4-1/2(114)
2-1/4(57)
7-1/2(190)
DSN Lever: CastEscutcheon: Wrought
DSP Lever: CastEscutcheon: Wrought
2-11/16(68)
4-1/2(114)
2-1/4(57)
7-1/2(190)
2-11/16(68)
4-1/2(114)
1-5/8(41)
7(178)
1-3/4(44)
8-1/2(216)
2-5/8(67)
4-1/2(114)
NSR Lever: CastEscutcheon: Cast ASR Lever: Cast
Escutcheon: Cast DSR Lever: CastEscutcheon: Cast
All “F” roses = 2-7/8" (73mm) diameter cast All “F” roses = 2-7/8" (73mm) diameter cast All “F” roses = 2-7/8" (73mm) diameter cast
Corbin Russwin Product Guide.13
Applications/Features
ML2000 Series
7-1/2(190)
3(76)
2-1/4(57)
2-1/4(57)
1-5/8(41)
8-1/2(216)
2-3/4(70)
2(51)
GRMGWM
Knob: Wrought reinforcedEscutcheon: Wrought Knob: Wrought Escutcheon: Wrought
ESAESBESF
Lever: CastRose: Wrought Lever: CastRose: Cast Lever: CastRose: Cast
Essex
2-1/4(57)
2-7/16(62)
4-5/8(117)
Complies with codes requiring 1/2 " (13mm) lever returnBrass, bronze, stainless steelDoor Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm)
ESM Lever: CastEscutcheon: Wrought
4-5/8(117)
2-3/8(60)
2-1/4(57)
7-1/2(190)
4-5/8(117)
2-3/8(60)
2-1/4(57)
7-1/2(190)
4-5/8(117)
2-3/8(60)
1-5/8(41)
7(178)
ESR Lever: CastEscutcheon: Cast
4-5/8(117)
2-7/16(62)
1-3/4(44)
8-1/2(216)
Princeton
2-1/4(57)
2-1/2(64)
5-1/4(133)
Complies with codes requiring 1/2 " (13mm) lever returnBrass, bronze, stainless steelDoor Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm)
2-1/4(57)
7-1/2(190) 5-1/4
(133)
2-1/2(64)
2-1/4(57)
7-1/2(190) 5-1/4
(133)
2-1/2(64)
1-5/8(41)
7(178)
2-1/2(64)
5-1/4(133)
1-3/4(44)
8-1/2(216)
2-1/2(64)
5-1/4(133)
GSA
GRC
GWC
Knob: CastEscutcheon:Wrought
Knob: 2-7/8"Wrought reinforcedRose: WroughtreinforcedKnob: 2-7/8"Wrought Rose:Wrought reinforced
Global
2-7/8(73)
3(76)
2-1/4(57)
Brass, bronze, stainless steelDoor Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm)
GREGWE
Knob: Wrought reinforcedSquare Rose: Wrought reinforcedKnob: Wrought Square Rose: Wrought reinforced
2-7/8(73)
2-1/8(54)
3(76)
GRPGWP
Knob: Wrought reinforcedEscutcheon: Wrought Knob: Wrought Escutcheon: Wrought
GSR Knob: CastEscutcheon: Cast
1-5/8(41)
8-1/2(216)
2-3/4(70)
2(51)
ESN Lever: CastEscutcheon: Wrought
ESP Lever: CastEscutcheon: Wrought
PSAPSBPSF
Lever: CastRose: Wrought Lever: CastRose: Cast Lever: CastRose: Cast
PSM Lever: CastEscutcheon: Wrought
PSR Lever: CastEscutcheon: Cast
PSN Lever: CastEscutcheon: Wrought
PSP Lever: CastEscutcheon: Wrought
GRD
GWD
GSF
Knob: 3-1/2"Wrought reinforcedRose: WroughtreinforcedKnob: 3-1/2"WroughtRose: Wroughtreinforced Knob: 3-1/2"WroughtRose: Wroughtreinforced
All “F” roses = 2-7/8" (73mm) diameter cast All “F” roses = 2-7/8" (73mm) diameter cast
Corbin Russwin Product Guide.14
Applications/Features
ML2000 Series
1-3/4(44)
8-1/2(216)
2-1/8(54)
2-3/16(55)
7-1/2(190)
2-7/8(73)
2-3/16(55)
2-1/4(57)
1-5/8(41)
7(178)
2-7/8(73)
2-3/16(55)
BRPBWP
Knob: Wrought reinforcedEscutcheon: Wrought Knob: Wrought Escutcheon: Wrought
BRMBWM
Knob: Wrought reinforcedEscutcheon: Wrought Knob: Wrought Escutcheon: Wrought
BREBWE
Knob: Wrought reinforcedRose: Wrought reinforcedKnob: Wrought Rose: Wrought reinforced
BRC
BWC
Belmont
2-7/8(73)
2-3/16(55)
2-3/16(55)
Brass, bronze, stainless steelDoor Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm)
3(76)
2-3/16(55)
2-3/16(55)
SST Knob: Cast Stainless SteelEscutcheon: Cast Stainless Steel
SuretyBrass or bronzeDoor Thickness: 1-3/8" (35mm), 1-3/4"(44mm), 2-1/4" (57mm)
Knob: WroughtreinforcedRose: WroughtreinforcedKnob: WroughtRose: Wroughtreinforced
Knob: WroughtreinforcedRose: WroughtreinforcedKnob: CastRose: Wrought
BRD
BWD
ML2000HS Series
Knob: Wrought Escutcheon: Wrought
YWN Knob: Wrought Escutcheon: Wrought
YWM Knob: Wrought Escutcheon: Wrought
YWA
YWF
YankeeBrass, bronze, stainless steelDoor Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm)
Knob: WroughtRose: Wrought
Knob: WroughtRose: 2-7/8"diameter cast
YWP
Knob: Wrought Escutcheon: Wrought YWR
NSV Lever: Cast Stainless SteelEscutcheon: Cast stainless steel
NewportDoor Thickness: Spindles self-adjusting,
1-3/4" (44mm) to 2-1/4" (57mm)
ML2000 VandalResistant Series
CSV Lever: Cast Stainless SteelEscutcheon: Cast stainless steel
CitationDoor Thickness: Spindles self-adjusting,
1-3/4" (44mm) to 2-1/4" (57mm)
Corbin Russwin Product Guide.15
Applications/Features
Vineyard Collection
ZSG Lever: CastRose: CastSpecify Hand
TSG Lever: CastRose: CastSpecify Hand
Merlot Frascati
Zinfandel TuscanyComplies with codes requiring lever to return to within 1/2" (13mm)of door face.
MSG
Lever: CastEscutcheon: Cast
Lever: CastRose: Cast
MSL
FSG
Lever: CastEscutcheon: Cast
Lever: CastRose: Cast
FSL
Lever: CastEscutcheon: CastSpecify Hand
ZSL Lever: CastEscutcheon: CastSpecify Hand
TSL
Corbin Russwin Product Guide.16
Applications/Features
CL3200 Series
ApplicationsA heavy-duty, high-use lockset that combines theconvenience of a barrier-free lever lockset withthe security of a 1" (25mm) deadbolt in a singledoor prep.
Advantages• Enhanced access - 20° turn of lever retracts
deadbolt.• Combines 1/2" (13mm) throw latch and 1"
(25mm) throw deadbolt.• Cost-effective - requires less installation time
than separate lockset and deadbolt. • Exceeds ANSI Grade 1 requirements.• Utilizes standard door prep.
Leverattached torose for vandalresistance
Innovative rack-and-piniondesign allowslatchbolt toretract with 20°turn of lever
Hardened steelspindle for securityand long life
Through-bolts ensure properalignment, smooth operationand security
1/2” (13mm) throwlatchbolt projects to1” (25mm) throwdeadbolt, combiningconvenience andsecurity in onestandard door prep
FeaturesHandingSpecify hand.
Door Thickness1-3/8" (35mm)- 1-3/4" (44mm)standard.
Backset 2-3/4" (70mm) only.
Lock Chassis Hardened steel, zinc and dichromateplated for corrosion resistance.
Front Brass, bronze or stainless steel, 2-1/4"(57mm) x 1-1/8" (29mm).Accommodates flat doors and doorsbeveled 1/8" (3mm) in 2" (51mm).
LatchboltBrass 1/2" (13mm) throw latchprojects to 1" (25mm) throwdeadbolt. Hardened steel insert,nylon anti-friction insert.
StrikeWrought brass or bronze, ANSIcurved lip standard, 4-7/8" (124mm)x 1-1/4" (32mm) x 1-1/4" (32mm) lipto center.
Cylinder Brass, 6-pin interchangeable core(IC), L4 keyway, 0-bitted standard.
Keying Features Available Master keying Construction master keyingVisual key controlConcealed key controlSecurity ICPyramid IC
Keys Two nickel-silver standard.
Warranty Two-year limited.
Certification/ComplianceANSI Meets A117.1 Accessibility Code ofthe ADA.
FederalMeets FF-H-106C.
California State Reference Code(Formerly Title 19, California State FireMarshal Standard)
All levers with returns comply; leversreturn to within 1/2" (13mm) of doorface.
UL/ULC All locks listed for A label and lesserclass single doors, 4' x 10'.
FinishesBHMA 605, 606, 611, 612, 613, 625,626, 629, 630.
Corbin Russwin Product Guide.17
Applications/Features
CL3300 Series
ApplicationsIdeal for high-use commercial, industrial and institutionalapplications such as schools, universities, hotels, offices andapartments.
Advantages• Patented lever release design for vandal resistance. • Solid cast levers.• Independent return springs prevent lever sag.• Anti-rotation throughbolts.• Exceeds ANSI Grade 1 requirements.• UL 3-hour fire rating for 4' x 10' door.
CL3352 Classroom Intruder Function The CL3352 classroom intruder lock improves upon standardclassroom function locks by providing double cylinder control,allowing the teacher to secure the door from the inside. The"anti-panic" feature always allows egress while leaving theoutside lever locked. Thus classroom security is ensured whileallowing safe and easy egress.
1/2" (13mm)throw latchbolt
3 solid, cast lever options,non-handed with LEVERRELEASE design
Anti-rotationalthroughbolts at 6 and12 o’clock positions
Expanded keyingoptions
FeaturesHanding Non-handed.
Door Thickness 1-3/4" (44mm) to 2" (51mm) standard.2" (51mm) to 2-1/4" (57mm) Optional.
Backset 2-3/4" (70mm) standard. Optional: 3-3/4"(95mm), 5" (127mm).
Lock Chassis Steel, zinc dichromated for corrosionresistance.
Front Wrought brass or bronze. 2-1/4" (57mm) x 1-1/8" (29mm). Accommodates flat doorsand doors beveled 1/8" (3mm) in 2"(51mm). Optional; rounded corners.Latchbolt Brass, chrome plated with 1/2" (13mm)throw. Optional: 3/4" (19mm) throwdeadlocking fire latch for pair of doors.
Auxiliary Latchbolt Deadlocking latchbolt preventsmanipu-lation when door is closed.
Strike Wrought brass or bronze, ANSI curvedlip standard, 4-7/8" (124mm) x 1-1/4"(32mm) x 1-1/4" (32mm) lip to center.Optional strikes, lip lengths and ANSIwrought strike box available.
Cylinder Brass, 6-pin, L4 keyway, 0-bittedstandard.
Keying Features Available Master keyingConstruction master keyingVisual key controlConcealed key controlInterchangeable core (IC)PyramidPyramid ICSecuritySecurity IC (not available with CL3329)
Keys Two nickel silver standard.
Warranty Five-year limited.
Certification/ComplianceANSI Meets A156.2 Series 4000, Grade 1.Meets A117.1 Accessibility Code of theADA.
Federal Meets FF-H-106C.
California State Reference Code(Formerly Title 19, California State Fire MarshalStandard)
All levers with returns comply; leversreturn to within 1/2" (13mm) of doorface.
UL / ULC All locks listed for A label and lesserclass single doors, 4' x 10'.
Finishes BHMA 605, 606, 611, 612, 613, 625, 626.Zinc levers are plated to match BHMAfinish.
Corbin Russwin Product Guide.18
Applications/Features
CL3600 Series
ApplicationsA mid-priced, heavy duty Grade 1 lever lockset, ideal forcommercial, institutional and multi-family applications.
Advantages• Handed• Solid cast levers• No plastic inserts• Independent return springs prevent lever sag• Through-bolted cylindrical chassis• Trim and keying compatible with other Corbin Russwin
locksets
1/2" throw latchboltaccommodates 7/8"(22mm) and 1" (25mm)edge bore preps
Through-bolts prevent chassisrotation; ensure proper alignment,smooth operation and long life
2-3/4" (70mm), 2-3/8"(60mm), 3-3/4" (95mm),and 5" (127mm)backsets available.
Lever designscompatible withCorbin RusswinMortise locks, ExitDevices and otherLever Locksets
FeaturesHanding Non-handed (except for CL3629,CL3680, CL3681, CL3690, CL3691;specify hand).
Door Thickness 1-3/8" (35mm) to 2" (51mm) standard.
Backset 2-3/4" (70mm) standard. Optional: 2-3/8" (60mm), 3-3/4"(95mm), and 5" (127mm).
Lock Chassis Stainless steel and steel, zincdichromated for corrosion resistance.
FrontWrought brass or bronze. 2-1/4" (57mm)x 1-1/8" (29mm) for 2-3/4" (70mm)backset; 2-1/4" (57mm) x 1" (25mm) for2-3/8" (60mm) backset. Accommodatesflat doors and doors beveled 1/8" (3mm)in 2"(51mm).
Latchbolt Brass, chrome plated with 1/2" (13mm)throw.
Auxiliary Latchbolt Deadlocking latchbolt preventsmanipulation when door is closed.
Strike Wrought brass or bronze ANSI curvedlip standard, 4-7/8" (124mm) x 1-1/4"(32mm) x 1-1/4" (32mm) lip to center.
Cylinder Brass, 6-pin, L4 keyway, 0-bittedstandard.Keying Features AvailableMaster keyingConstruction master keying Visual key control Concealed key controlInterchangeable core (IC)PyramidPyramid ICSecuritySecurity IC
Keys Two nickel silver standard.
WarrantyOne-year limited.
Certification/ComplianceANSIMeets A156.2 Series 4000, Grade 1.Meets A117.1 Accessibility Code of theADA.
FederalMeets FF-H-106C.
California State Reference Code(Formerly Title 19, California State Fire MarshalStandard)
All levers with returns comply; leversreturn to within 1/2" (13mm) of doorface.
UL / ULC All locks listed for A label and lesser classsingle doors, 4' x 10'.
Finishes BHMA 605, 606, 611, 612, 613, 625,626. Zinc levers are plated to matchBHMA finish.
Corbin Russwin Product Guide.19
Applications/Features
ApplicationsAn economical, Grade 2 standard duty lever lockset, idealfor light commercial applications.
Advantages• Solid cast levers.• ANSI Grade 2 certification.• UL 3-hour fire rating.• Independent lever return springs.• Through-bolts on door for solid attachment.• Cover ANSI/DHI Door Prep A115.18-1994 “Spider Cut Out”.• Patented Lever Release for vandal resistance.
1/2" throwstainless steellatchbolt
Anti-rotation through- boltingensures proper alignment andtrouble free operation
Multiple keyingoptions CorbinRusswin 6-pinstandard andremovable core
CL3900 Series
FeaturesHanding Non-handed.
Door Thickness 1-3/8" (35mm) to 1-3/4" (44mm)standard. Optional: 2" (51mm) to 2-1/4" (57mm)
Backset 2-3/4" (70mm) standard.Optional: 2-3/8" (60mm).
Lock ChassisSteel, zinc dichromated for corrosionresistance.
FrontStandard: 2-1/4" (57mm) x 1-1/8"(29mm), square corner, beveled, for 2-3/4" (70mm) backset or 2-1/4"(57mm) x 1" (25mm) square corner,beveled, for 2-3/8" (60mm) backset.
Latchbolt 1/2" (13mm) throw.
Auxiliary Latchbolt Deadlocking latchbolt preventsmanipu-lation when door is closed.
Strike ANSI curved lip strike standard. 4-7/8"(124mm) x 1-1/4" (32mm) x 1-1/4"(32mm) lip to center.
Cylinder Brass, 6-pin, L4 keyway, 0-bittedstandard.
Keying Features Available Master keyingConstruction master keyingVisual key controlConcealed key controlInterchangeable core (IC)PyramidPyramid ICSecurity Security IC
Keys Two nickel silver standard.
Warranty One-year limited.
Certification/ComplianceANSI Meets A156.2 Series 4000, Grade 2.Meets A117.1 Accessibility Code of theADA.
Federal FF-H-106C.
California State Reference Code(Formerly Title 19, California State Fire MarshalStandard)
All levers with returns comply; leversreturn to within 1/2" (13mm) of doorface.
UL / ULCAll locks listed for B label Single doors.UL symbol on latch front indicateslisting.
Finishes BHMA 605, 606, 611, 612, 613, 625 & 626.Zinc levers are plated to match BHMAfinish.
Corbin Russwin Product Guide.20
Applications/Features
CL3700 Series
ApplicationsAn economical, Grade 2 light/medium duty lever lockset,ideal for light commercial and heavy-duty residentialapplications.
Advantages• Patented Lever Release design for vandal resistance• ANSI Grade 2 certification.• UL 1-1/2 hour fire rating.• Interlocking tubular chassis and latchbolt.• Designed and manufactured in an ISO 9001 facility.
1/2" throw stainlesssteel latchbolt
Multiple keyingoptions CorbinRusswin 6-pinstandard andremovable core
FeaturesHanding Right or left hand must be specified forFrascati CL3750, 3755, 3759 and 3780.
Door Thickness1-3/8" (35mm) to 1-3/4" (44mm)standard.
Backset 2-3/4" (70mm) standard. Optional: 2-3/8"(60mm).
Lock Chassis Die cast zinc for corrosion resistance.
FrontWrought brass or bronze. 2-1/4"(57mm) x 1-1/8" (29mm) for 2-3/4"(70mm) backset; 2-1/4" (57mm) x 1" (25mm) for 2-3/8" (60mm) backset.Accommodates flat doors and doorsbeveled 1/8" (3mm) in 2"(51mm).
Latchbolt 1/2" (13mm) throw.
Auxiliary Latchbolt Deadlocking latchbolt preventsmanipulation when door is closed.
Strike T-Strike is standard. Optional strikes,lip lengths and ANSI wrought strike boxavailable.
Cylinder Brass, 6-pin, L4 keyway, 0-bittedstandard.
Keying Features Available Master keyingConstruction master keyingVisual key controlConcealed key controlPyramid
Keys Two nickel silver standard.
Warranty One-year limited.
Certification/ComplianceANSI Meets A156.2 Series 4000, Grade 2.Meets A117.1 Accessibility Code of theADA.
California State Reference Code(Formerly Title 19, California State Fire MarshalStandard)
All levers with returns comply; leversreturn to within 1/2" (13mm) of doorface.
UL / ULC All locks listed for B label Single doors.UL symbol on latch front indicateslisting.
Finishes BHMA 605, 606, 612*, 613*, 625 &626*. Zinc levers are plated to matchBHMA finish.
*Simulated painted finish meetingANSI standards for wear anddurability.
Corbin Russwin Product Guide.21
Applications/Features
CL3200, 3300, 3600, 3700 & 3900 Series
Type ANSI CL3200 CL3300 CL3600 CL3700 CL3900 Function Description
Passage orCloset
F75 CL3210 CL3310 CL3610 CL3710 CL3910 - Latchbolt by lever either side.- Both levers always free.
PrivacyBedroom orBathroomDeadlock
F76CL3220CL3230
CL3320 CL3620 — —
- Latchbolt by lever either side.- Outside lever locked by push or turn button.- Outside lever unlocked by emergency release tool outside, by
rotating inside lever or by closing door. (CL3320, CL3620, CL3920 only)
- Inside lever always free.
Hotel or Motel F93 — CL3329 CL3629 — —
- Throw-off latchbolt by lever inside or by key outside.- Push button shuts out all keys except emergency key and projects
occupancy indicator in face of cylinder.- Push button released by turning inside lever or by closing door.- Outside lever always locked.- Inside lever always free.- When ordering, specify hand.
Institution orUtility
F87 — CL3332 — — — - Deadlocking latchbolt by key either side.- Lever handle is freewheeling in locked position.
Patio or PrivacyF77 — CL3340 — — —
- Throw-off latchbolt by lever either side.- Outside lever locked by push button. Lever handle is
freewheeling in locked position.- Outside lever unlocked by rotating inside lever or by closing door.- Inside lever always free.- Should not be used in rooms that have no other entrance.
Communicating F80 — CL3362 — — CL3962
- Deadlocking latchbolt by lever either side, except when key in either lever locks and unlocks the lever independently of the other. (Lever handle is freewheeling in locked position.)
- Keyed alike unless otherwise specified.- Should be used only in office or room with multiple entries.
Entrance orOffice
F109 CL3251 CL3351 CL3651 CL3751 CL3951
- Latchbolt by lever either side, except when turn button locks outside lever.
- Pushing in and turning button locks outside lever, requiring keyat all times. Turning inside lever does not unlock outside lever until button is manually turned to unlocked position. (CL3351, CL3651, CL3951).
- Key outside retracts latchbolt.- Inside lever/knob always free.
Entrance orOffice
F82 CL3261 CL3361 CL3661 — —
- Deadlocking latchbolt by lever either side, except when turn button locks outside lever.
- Push button released by turning inside lever or by key in outside lever.
- Closing door does not release push button.- Inside lever/knob always free.
Classroom F84 CL3255 CL3355 CL3655 CL3755 CL3955 - Latchbolt by key in outside lever or by rotating inside lever.- Outside lever always rigid, unless freewheeling - CL3355, CL3955- Inside lever always free.
Storeroom orCloset
F86 CL3257 CL3357 CL3657 — CL3957
- Deadlocking latchbolt by lever either side, except when key outside locks outside lever.
- Outside lever unlocked by key outside.- Inside lever always free.
Barrier-FreeStoreroom orCloset
F86 CL3257 — CL3659 CL3759 —
- Deadlocking latchbolt by lever inside.- Key outside unlocks outside lever to retract latchbolt.- Key is retained in the unlocked mode.- When key is removed, outside lever is locked.- Inside lever is always free.
Corbin Russwin Product Guide.22
Applications/Features
CL3200, 3300, 3600, 3700 & 3900 Series
Type ANSI CL3200 CL3300 CL3600 CL3700 CL3900 Function Description
Apartment, Exitor Public Toilet
F88 — CL3372 CL3672 — —
- Deadlocking latchbolt by lever either side, except when key locksoutside lever.
- Key outside retracts latchbolt.- Key inside unlocks outside lever.- Inisde lever always free.- Keyed alike unless otherwise specified.
Dormitory F90 — — — — CL3975
- Deadlocking latchbolt by lever either side, except when pushbutton or keylocks outside lever.
- Pushbutton released by turning inside lever, by closing door, by 1/4counter clockwise turn of key in outside lever, or by key in outsidelever. If pushbutton is held in, outside lever will retract latchbolt.
- Inside lever always free.
Passage Lever xBlank Plate
— — CL3380 CL3680 CL3780 —
- Deadlocking latchbolt by lever.- Lever on one side; blank plate on other side.- Lever always free.- When ordering, specify hand from lever side.- For single or double communicating doors.
Keyed Lever xBlank Plate
— — CL3381 CL3681 — CL3981- Deadlocking latchbolt by lever, except when lever is locked by key.- Lever on one side; blank plate on other side.- When ordering, specify hand from lever side.
Store Door F91 — — CL3682 — —- Deadlocking latchbolt by lever either side, except when key either side
locks both levers.- Keyed alike unless otherwise specified.
Passage lever xTurnpiece
— — CL3390 CL3690 — —
- Latchbolt by lever or by turnpiece.- Lever on one side; turnpiece on other side.- Lever and turnpiece always free.- When ordering, specify hand from lever side.
Keyed Lever xTurnpiece
— — CL3391 CL3691 — —
- Deadlocking latchbolt by lever or turnpiece, except when lever islocked by key.
- When lever is locked, latchbolt is operated by key in lever or by turnpiece.- Lever on outside; turnpiece on inside.- Turnpiece always free.- When ordering, specify hand from lever side.
Service Station F92 — CL3393 — — —
- Throw-off latchbolt by lever either side.- Outside lever locked by slotted push button.- Outside lever unlocked by rotating inside lever or by closing door.- When slotted push button is pushed in and turned, outside lever
becomes rigid and deadlocking latch is activated.- Outside lever is unlocked by using key or by rotating inside lever.- Inside lever always free.
Half DummyTrim — CL3250 CL3350 CL3650 CL3750 CL3950 - Lever acts as pull only; no operation.
Full DummyTrim — CL3270 CL3370 CL3670 — — - Levers act as pull only; no operation.
ClassroomIntruder F110 — CL3352 — — —
- Deadlocking latchbolt by lever either side, except when key inside oroutside locks outside lever.
- Outside lever is free wheeling in locked position.- Inside lever always free.
Corbin Russwin Product Guide.23
Applications/Features
CL3200, 3300, 3600, 3700 & 3900 Series
Lever: Die cast zincRose: Wrought brass or
bronze
CL3200 Series
ASD Lever: Forged brass orcast stainless steelRose: Forged brass orcast stainless steel
Armstrong
3-1/2(89)
2-11/16(68)
4-11/16(119)
NSD Lever: Forged brass orcast stainless steelRose: Forged brass orcast stainless steel
Newport
3-1/2(89)
2-11/16(68)
5(127)
CL3300 Series
AZD Lever: Die cast zincRose: Wrought
Armstrong
3-1/2(89)
2-13/16(71)
4-5/8(117)
NZD Lever: Die cast zincRose: Wrought
Newport
3-1/2(89)
2-13/16(71)
5(127)
PZD Lever: Die cast zincRose: Wrought
Princeton
3-1/2(89)
2-13/16(71)
4-5/8(117)
CL3600 Series
AZD
Armstrong
3-1/2(89)
2-13/16(71)
4-1/2(114)
Newport
3-1/2(89)
2-13/16(71)
4-1/2(114)
CL3900 Series
AZD Lever: Die cast zincRose: Wrought brass
or bronze
Armstrong
3-1/2(89)
2-13/16(71)
4-1/2(114)
NZD
Newport
3-1/4(83)
2-13/16(71)
4-1/2(114)
PZD
Princeton
3-1/2(89)
3-1/2(89)
5-1/2(138)
CL3700 Series
NZD Lever: Die cast zincRose: Brass
Newport
2-9/16(65)
2-7/16(62)
4-3/4(121)
Lever: Die cast zincRose: Wrought brass or
bronzeNZD Lever: Die cast zinc
Rose: Wrought brass or bronze
Lever: Die cast zincRose: Wrought brass
or bronze
PZD Lever: Die cast zincRose: Brass
Princeton
FZD Lever: Die cast zincRose: Brass
Frascati
2"(57)
4"(108)
2"(57)2"
(57)
4"(108)
2"(57)
Corbin Russwin Product Guide.24
Applications/Features
CK4200 Series
ApplicationsIdeal for demanding, high-use commercial, industrialand institutional applications.
Advantages• Patented “Lock-on” rose liners and thimble increase
security and prevent lock from loosening.• 1-3/4" (44mm) knob shank minimizes wear.• 5/8" (16mm) latch and concealed knob catch enhance
strength and security. Heavy wroughtknobs with steel linerfor impact resistance
5/8" (16mm)throw latchbolt
1-3/4" (44mm) knob shanksenhance stability and minimizewear
Internal parts arezinc dichromateplated for rustresistance
FeaturesHandingField reversible.
Door Thickness 1-3/8" (35mm)- 1-3/4" (44m)standard.
Backset2-3/4" (70mm) standard. Optional: 3-3/4" (95mm), 5" (127mm) and 7" (178mm).
Lock ChassisSteel, zinc dichromated for corrosionresistance.
Front Wrought brass, bronze or stainlesssteel, 2-1/4" (57mm) x 1-1/8"(29mm). Accommodates flat doorsand doors beveled 1/8" (3mm) in 2"(51mm).
Latchbolt Brass, chrome plated 5/8" (16mm)throw, with nylon insert.
Strike Wrought brass or bronze, ANSIcurved lip standard, 4-7/8" (124mm)x 1-1/4" (32mm) x 1-1/4" (32mm) lipto center.
Cylinder Brass, 6-pin interchangeable core(IC), L4 keyway, 0-bitted standard.
Keying Features AvailableMaster keyingConstruction master keyingVisual key controlConcealed key controlSecurityInterchangeable core (IC) PyramidPyramid ICSecurity ICMaster ring
KeysTwo nickel-silver standard.
Warranty One-year limited.
Certification/ComplianceANSI Meets A156.2 Series 4000, Grade 1.
Federal Meets FF-H-106C.
UL/ULC All locks listed for A label and lesserclass single doors, 4' x 8'. Letter Fand UL symbol on latch frontindicate listing.
FinishesBHMA 605, 606, 611, 612, 613, 625,626, 629, 630.
Corbin Russwin Product Guide.25
Applications/Features
CK4400 Series
ApplicationsAn outstanding combination of value and performance. Idealfor quality residential and light commercial buildings.
Advantages• Wide array of functions.• Precision manufactured mechanisms, zinc dichromated for
corrosion resistance.• Stainless steel latchbolt for long life.• Adjustable latchbolt accommodates flat and beveled doors.• Stainless steel trim available.
Inside rose liner through-bolted to lock chassis toensure proper alignmentand smooth operation
Knob designs compatible withCorbin Russwin Pre-AssembledUnit Locks, Mortise Locksets,Exit Devices and otherCylindrical Locks
2-3/8" (60mm), 2-3/4" (70mm), 3-3/4"(95mm), & 5"(127mm) backsetsavailable
FeaturesHandingField reversible.
Door Thickness1-3/8" (35mm) to 1-3/4" (44mm)standard.
Backset2-3/4" (70mm) standard. Optional: 3-3/4" (95mm), 5"(127mm).
Lock ChassisSteel, zinc dichromated for corrosionresistance.
Front Wrought brass, bronze or stainlesssteel. 2-1/4" (57mm) x 1-1/8"(29mm). Accommodates flat doorsand doors beveled 1/8" (3mm) in 2"(51mm).
Latchbolt Brass, chrome plated with 1/2"(13mm) throw.
Strike Wrought brass, bronze or stainlesssteel, ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center.
CylinderBrass, 6-pin, L4 keyway, 0-bittedstandard.
Keying Features AvailableMaster keyingConstruction master keying
Keys Two nickel silver standard.
WarrantyOne-year limited.
Certification/ComplianceANSIMeets A156.2 Series 4000, Grade 2.
FederalMeets FF-H-106C.
UL/ULCAll locks listed for A label and lesserclass single doors, 4' x 8'. Letter Fand UL symbol on latch frontindicate listing.
FinishesBHMA 605, 612, 613, 629, 630.
Corbin Russwin Product Guide.26
Applications/Features
CK4700 Series
CK4200 Series
GRCGRD
GRE
Knob: Wrought reinforcedRose: Wrought reinforcedKnob: Wrought reinforcedRose: Wrought reinforced
31/2" (89mm) Dia.Knob: Wrought reinforcedRose: Wrought reinforced
3" (76mm) Sq.
Global Belmont
CK4400 Series
GWC Knob: WroughtRose: Wrought reinforced
Global
BWC Knob: WroughtRose: Wrought reinforced
Belmont
CK4700 Series
GWC Lever: BrassRose: Brass
Global
Brass, bronze or stainless steelBrass, bronze or stainless steel
Brass, bronze or stainless steelBrass, bronze or stainless steel
BRCBRD
BRE
Knob: Wrought reinforcedRose: Wrought reinforcedKnob: Wrought reinforcedRose: Wrought reinforced
31/2" (89mm) Dia.Knob: Wrought reinforcedRose: Wrought reinforced
3" (76mm) Sq.
ApplicationsAn economical, Grade 2 light/medium-duty knob lockset,ideal for light commercial and heavy-duty residentialapplications.
Advantages• ANSI Grade 2 certification.• UL 1-1/2 hour fire rating.• Interlocking tubular chassis and latchbolt.• ISO 9001 designed and manufactured in a certified
9001 facility.
Multiple keying optionincluding Corbin Russwinstandard and interchangeablecore cylinders and cylinderswith Schlage® C keyway.
1/2" throwstainless steellatchbolt
Brass
GRC BRC
FeaturesHandingNon-handed.
Door Thickness1-3/8" (35mm)- 1-3/4"(44mm) standard.
Backset2-3/4" (70mm) standard.Optional: 2-3/8" (60mm).
Lock ChassisDie cast zinc dichromatedfor corrosion resistance.
Auxiliary LatchboltDeadlocking latchboltprevents manipulationwhen door is closed.
StrikeT-Strike standard.Optional strikes, liplengths and ANSI wroughtstrike box available.
CylinderBrass, 6-pin, L4 keyway, 0-bitted standard.
Keying Features AvailableMaster keyingConstruction master keyingVisual key controlConcealed key controlPyramid
KeysTwo nickel-silver standard.
WarrantyOne-year limited.
Certification/ComplianceANSI (lever)Meets A156.2 Series 4000,Grade 2.
FederalMeets FF-H-106C.
UL/ULC All locks listed forB label single doors. ULsymbol on latch frontindicates listing.
FinishesBHMA 605 and 626.
Corbin Russwin Product Guide.27
Applications/Features
CK4200, CK4400 & CK4700 Functions
Type
Passage or Closet
Privacy, Bedroom or Bathroom
Hotel or Motel
Privacy, Bedroom orBathroom
Institutional or Utility
Patio or Privacy
Entrance or Office
Classroom
Storeroom or Closet
Barrier-FreeStoreroom or PublicRestroom
Office or Privacy
Apartment ExitPublic Toilet
Communicating orExitDormitory
Store Door
Half Dummy Trim
Full Dummy Trim
ANSI
F75
F76
F93
F76
F87
F77
F81/F82
F84
F86
F86
F82
F88
-----
-----
F91
----------
CK4200
CK4210
CK4220
CK4229
CK4230
CK4232
-----
CK4251CK4261
CK4255
CK4257
-----
CK4261
CK4272
-----
CK4275
CK4282
CK4250
CK4270
CK4700
CK4710
CK4720
-----
-----
-----
-----
CK4751
CK4755
-----
CK4759
-----
-----
-----
-----
-----
CK4750
-----
Function Description
- Latchbolt by knob either side.- Both knobs always free.
- Latchbolt by knob either side.- Outside knob locked by push button.- Emergency release in outside knob.- Outside knob unlocked by emergency release tool outside, by rotating inside knob or by closing door.- Inside knob always free.
- Deadlocking latchbolt by knob inside or by key outside.- Push button shuts out all keys except emergency key and projects occupancy indicator in face of cylinder.- Push button released by turning inside knob or by closing door.*- Outside knob always rigid.- Inside knob always free.
- Deadlocking latchbolt by knob either side.- Outside knob locked by pushbutton.- Outside knob unlocked by turning slotted button outside, by rotating inside knob, or by closing door.- Inside knob always free.
- Deadlocking latchbolt key either side.- Both knobs always rigid.
- Deadlocking latchbolt by key either side, except when turn or push button locks outside knob.- Push button released by turning inside knob or by closing door.- Inside knob always free.
- Deadlocking latchbolt by knob either side, except when turn or push button locks outside knob.- Pushing in and turning button locks outside knob, requiring key at all times. Turning inside knob does not unlock outside knob until button is manually turned to unlocked position. (CK4451 only)
- Key outside retracts latchbolt. (CK4251)- Outside knob unlocked by turn button. (CK4251)- Turning inside knob unlocks outside knob. (CK4451 only)- Inside knob always free.
- Deadlocking latchbolt by knob either side, except when key outside locks outside knob.- Outside knob unlocked by key outside.- Inside knob always free.
- Deadlocking latchbolt by key in outside knob or by rotating inside knob.- Outside knob always rigid.- Inside knob always free.
- Deadlocking latchbolt by key in outside knob or by rotating inside knob.- Key outside unlocks outside knob to retract latchbolt. Key is retained in the unlocked mode when key is
removed, outside knob is locked.- Inside knob always free.
- Deadlocking latchbolt by knob either side, except when push button locks outside knob.- Push button released by turning inside knob or by key in outside knob.- Closing door does not release push button.- Inside knob always free.
- Deadlocking latchbolt by knob either side, except when key inside locks outside knob.- Key outside retracts latchbolt.- Key inside unlocks outside knob.- Inside knob always free.- Key alike unless otherwise specified.
- Deadlocking latchbolt by knob outside only.- Blank rose inside; no inside operation.
- Deadlocking latchbolt by knob either side, except when push button or key locks outside knob.- Push button released by turning inside knob, by closing door, by 1/4" counter clockwise turn of key in outside knob, or by key in outside knob. If push button is held in locked position, key in outside knob will retract latchbolt.
- Inside knob always free.
- Deadlocking latchbolt by knob either side, except when key either side locks both knobs. (CK4282, CK4482)- Keyed alike unless otherwise specified.
- Knob acts as pull only; no operation.
- Knobs act as pulls only; no operation.
CK4400
CK4410
-----
CK4429
CK4430
-----
CK4440
CK4451
CK4455
CK4557
-----
-----
-----
CK4480
-----
CK4482
CK4450
-----
*Unless push button has been fixed in locked position by spanner key (furnished). When push button is fixed byspanner key, lock is operable only by emergency key or by display key.
Corbin Russwin Product Guide.28
Applications/Features
UT5200 Series
ApplicationsIts pre-assembled, unitized construction is ideal for high-traffic commercial, institutional and industrialapplications.
Advantages• Factory pre-assembled for quick, economical, one-
piece installation; no job site assembly required.• 3/4" (19mm) radius latchbolt, designed to wedge more
tightly into the strike when tampered with, while meeting all ADA force-to-latch requirements.
3/4" (19mm) throwlatchbolt provides securityand meets all force-to-latch requirements
Conventional, high-security, interchangeablecore and master ringcylinder available forkeying flexibility
Installation of pre-assembled locksetrequires only tightening three through-bolts, significantly reducing costs andpotential for error
Precision-machinedinternal parts ensuresmooth operation andlong life
FeaturesHandingSpecify hand.
Door Thickness1-3/4" (44m) only.
Backset2-3/4" (70mm) only.
Lock ChassisOne-piece investment cast frame.Zinc dichromated.
Auxiliary LatchboltDeadlocking latchbolt preventsmanipulation when door is closed.
StrikeT-Strike standard. Optional strikes,lip lengths and ANSI wrought strikebox available.
FrontBeveled 1/8" (3mm) in 2" (51mm).
LatchboltBrass, chrome plated 3/4" (19mm)throw pivoted swinging type.
CylinderBrass, 6-pin, L4 keyway, 0-bittedstandard.
Keying Features AvailableMaster keyingConstruction master keyingVisual key controlConcealed key controlInterchangeable core (IC)SecurityPyramidPyramid IC Security ICMaster ring
KeysTwo nickel silver standard.
WarrantyOne-year limited.
Certification/ComplianceANSIMeets A156.2 Series 2000. MeetsA117.1 Accessibility Code of the ADA(lever design only).
FederalMeets FF-H-106C.
California State Reference Code(Formerly Title 19, California State FireMarshal Standard)
All levers with returns comply; leversreturn to within 1/2" (13mm) of doorface.
UL/ULCAll locks listed for A label and lesserclass single or pair, maximum doorsize 3'8" x 7'2".
FinishesBHMA 612, 613, 625, 626.
Corbin Russwin Product Guide.29
Applications/Features
UT5200 Series
Trim Designs
ESE Knob: WroughtRose: Wrought reinforced
Essex
5-5/16”(117)
2-7/16”(62)
4-1/8”(105)
3-1/8”(79)
GRE Knob: WroughtRose: Wrought reinforced
Global
2-1/4”(57)
2-3/4”(70)
4-1/8”(105)
3-1/8”(79)
BrassBrass
UT5200 FunctionsTypePassage or Closet
Privacy, Bedroom orBathroom
Entrance or Office(Levers Only)
Classroom
Storeroom or Closet
Entrance or Office
Apartment, Exit orPublic Toilet
Store Door
ANSI
F36
F37
F41
F42
F44
F40
F45
F46
UT5200
UT5210
UT5220
UT5261
UT5255
UT5257
UT5251
UT5272
UT5282
Function Description- Latchbolt by grip either side.- Both grips always free.
- Latchbolt by grip either side.- Outside grip locked by push button.- Outside grip unlocked by emergency release tool outside or by rotating inside grip or by closing door.- Inside grip always free.
- Deadlocking latchbolt by lever either side, except when turn button locks outside lever.- Push button released by turning inside lever or by key in outside lever.- Closing door does not release push button.- Inside lever always free.
- Deadlocking latchbolt by grip either side, except when key outside locks outside grip.- When outside grip is locked, latchbolt is operated by key outside or by rotating inside grip.- Inside grip always free.
- Deadlocking latchbolt by key in outside grip or by rotating inside grip.- Outside grip always rigid.- Inside grip always free.
- Deadlocking latchbolt by grip either side, except when turn button locks outside grip.- Key outside retracts latchbolt.- Outside grip unlocked by burn button.- Inside grip always free.
- Deadlocking latchbolt by grip either side, except when key inside locks outside grip.- Key outside retracts latchbolt.- Key inside unlocks outside grip.- Inside grip always free.- Keyed alike unless otherwise specified.
- Deadlocking latchbolt by grip either side, except when key either side locks both grips.- Keyed alike unless otherwise specified.
BRE Knob: WroughtRose: Wrought reinforced
BelmontBrass
Corbin Russwin Product Guide.30
Applications/Features
Padlocks, Deadlocks
Padlocks PL5000 SeriesFeaturesCaseExtruded brass.
ShackleHardened steel or brass.
LockingConventional model: latching attoe.IC model: ball-bearing lockingheel and toe.
CylinderConventional model: non-removable 6-pin, L4 keyway.IC model: Interchangeablecore.
Keying Features AvailableMaster keyingConstruction master keyingInterchangeable core (IC)6-pin ICPyramid ICSecurity IC
Cylindrical Deadbolt DL2100 SeriesFeaturesHandingNon-handed.
Door ThicknessStandard: 1-3/4" (44mm)- 2" (51mm).
BacksetStandard: 2-3/4" (70mm).Can be ordered 2-3/8"(60mm).
FrontStandard: wrought brass orbronze, 2-1/4" (57mm) x 1-1/8" (28mm).
Deadbolt Brass bolt with hardenedsteel 1" (25mm) throw.
StrikeStandard: wrought brass orbronze, 2-1/4" (57mm) x 1-1/8" (28mm).
Concealed key controlVisual key control (not forHS)Non-assembledKeysTwo nickel silver standard.
WarrantyOne-year limited.
FinishBHMA 606 Satin Brass.
CylinderStandard: brass, 6-pin, L4keyway, O-bitted.
Keying Features AvailableMaster keyingConstruction master keyingSecurityVisual key control Concealed key control KeysTwo nickel silver standard.WarrantyOne-year limited.
Cylindrical Deadbolt DL3100 SeriesFeaturesHandingNon-handed.Door Thickness Standard: 1-3/4 " (44mm) - 2 (51mm).BacksetStandard: 2-3/4" (70mm).Can be ordered 2-3/8"(60mm).Front Standard: wrought brass orbronze, 2-1/4" (57mm) x 1-1/8" (28mm).
DeadboltStainless steel withhardened steel insert;1" (25mm) throw.StrikeStandard: wrought brass orbronze, 2-1/4" (57mm) x 1-1/8" (28mm).CylinderStandard: brass, 6-pin, L4keyway, O-bitted.Keying Features AvailableMaster keyingConstruction master keying7-pin conventionalPyramid IC
Interchangeable core (IC)SecuritySecurity ICVisual key controlConcealed key controlKeysTwo nickel silver standard.Warranty One-year limited.
Certification/ComplianceULUl10B Fire-Rated AuxiliaryLock for A label and lesserclass doors when used witha correspondingly ratedprimary latching device.
Corbin Russwin Product Guide.31
Applications/Features
Deadlocks, Push-Pull Latches
Mortise Deadlocks DL4000 Series
Push-Pull Latches HL10 Series
Cylindrical Deadlocks DL3000 Series
FeaturesHandingNon-handed.
Door Thickness1-3/4" (44mm).
Backset 5" (127mm).
Front Wrought brass or bronzestandard. 2-1/4" (57mm)x 1-1/8" (28mm).Accommodates doors
beveled 1/8" (3mm) in 2"(51mm).
LatchboltBrass, chrome plated, 5/8"(16mm) throw .
StrikeWrought brass or bronze,curved lip box standard. 2-3/4" (70mm) x 1-1/8"(28mm) x 1-1/4" (32mm)lip to center.
Certification/ComplianceULListed for A label andlesser class single doors.Letter F and UL symbolon latch front indicatelisting.
FinishesBHMA 612, 625, 626
FeaturesHandingNon-handed.
Door Thickness Standard: 1-3/4" (44mm).
Backset2-3/4" (70mm).
LockcaseWrought steel; goldlacquer finish.
Front Wrought brass or bronze, 3-1/2" (89mm) x 1-1/8"(28mm).
Cylinder6-pin, L4 keyway, O-bitted.
Keying Features Available Master keyingConstruction masterkeying7-pin conventionalInterchangeable core (IC)
SecuritySecurity ICPyramidPyramid ICVisual key control Concealed key control
KeysTwo nickel silver standard.
WarrantyOne-year limited.
FeaturesHandingNon-handed, exceptDL3017, which is handedand field reversible.Door ThicknessStandard: 1-3/4" (44mm).Optional door thicknessesavailable; see QuickCodes.Backset2-3/4" (70mm) and 2-3/8(60mm).Front Wrought brass or bronze, 2-1/4" (57mm) x 1-1/8"
(28mm). Accommodatesflat doors and doorsbeveled 1/8" (3mm) in2" (51mm).DeadboltZinc die cast withhardened steel insert;1" throw.StrikeWrought brass or bronze,2-3/4" (70mm) x 1-1/8"(28mm). Optional strikesand wrought boxesavailable.Cylinder 6-pin, L4 keyway, O-bitted.
Keying Features AvailableMaster keyingConstruction masterkeying7-pin conventional Interchangeable core (IC)SecuritySecurity ICPyramidPyramid ICVisual key controlConcealed key controlKeysTwo nickel silver standard.WarrantyOne-year limited.
Corbin Russwin Product Guide.32
Applications/Features
ED6000 Series
ApplicationsIdeal for high-use situations.
Advantages• Meets ANSI Grade 1 requirements.• Heavy-duty construction.• Base metals (brass, bronze and stainless steel)
for durability.• Easy-to-use crossbar operation for quick egress
and ADA compliance.• Dogging standard on all panic-listed devices.• Through-bolted trims for strength and security.• Wide range of finishes, trims and styles to
match other Corbin Russwin products.• Devices available to satisfy panic and fire
opening requirements.
TrimsLever, knob, thumbpiece, pull and operatorescutcheonal trims available. Consult ED6000catalog for complete listing of designs andfunctions.
ED6200 Series Rim Exit Devices - Panic & Fire Labeled
ED6400 Series Exit Devices- Surface Vertical Rod, Panicand Fire Labeled
ED6800 Series Exit Devices - ConcealedVertical Rod, Panic & Fire Labeled (not pictured)
ED6600 Series MortiseLock Type Exit Devices -Panic and Fire Labeled
Refer to appropriate Exit Device Catalog for a complete listing of each series’ applications.
LustraL3
BelmontB3
Round GripT4
D Grip SectionalT5
FeaturesBar LengthEasily field cut to size.Standard 36" (914mm) barfits doors up to 36"(914mm). Optional 48"bar fits 36-1/2" (927mm) -48" (1219mm) door. Door ThicknessStandard: 1-3/4" (44mm). Stile (Rim)Minimum width with 1/2"(13mm) stop and standardstrike: 4" (102mm). With5/8" (16mm) stop andstandard strike: 4-1/8"(105mm).Projection 5-3/4" (146mm); 4-1/2"(114mm) depressed.Cases Heavy wrought, 7-1/4"(184mm) x 2-9/16"(65mm).CrossbarStandard: 13/16" (21mm)x 1-3/8" (35mm) ovalseamless tubing.WarrantyOne-year limited.ElectromechanicalAvailable with ED6600 andED6600A devices.
Certification/ComplianceANSIMeets A156.3, Grade 1.Meets A117.1 AccessibilityCode.UL / cULAll exit devices listed forsafety as panic hardware.3-hour fire-rated deviceslisted as fire exit hardwarefor A label and lesser classhardware.
California StateReference CodeNFPAAll exit devices complywith NFPA 101 Life SafetyCode.ADAExit devices, lever trimsand pulls comply withAmericans with DisabilitiesAct.FinishesBHMA 605, 606, 611, 612,613, 622, 625, 626, 629,630.
Corbin Russwin Product Guide.33
Applications/Features
ED7000 Series - Narrow Stile
ApplicationsIdeal for high-use situations on narrow and regular stiledoors in new construction and renovations.
Advantages• Meets or exceeds ANSI Grade 1 requirements.• Heavy-duty construction.• Base metals (brass, bronze and stainless steel) for
durability.• Easy-to-use crossbar operation for quick egress and
ADA compliance.• Dogging standard on all panic listed devices.• Through-bolted trims for strength and security.• Wide range of finishes, trims and styles to match other
Corbin Russwin products.• Devices available to satisfy panic and fire opening
requirements.
TrimsLever, knob, thumbpiece, pull and operatorescutcheonal trims available. Consult ED7000 catalog forcomplete listing of designs and functions.
ED7200 Series Rim Exit Device - Panic Only
Refer to appropriate Exit Device Catalog for a complete listing of each series’ applications.
ED7600 Series Mortise Lock TypeExit Devices - Panic and FireLabeled
ED7400 Series Surface VerticalRod Exit Devices - Panic Only
ED7800 Series Exit Devices - ConcealedVertical Rod, Panic & Fire Labeled (not pictured)
FeaturesBar LengthEasily field cut to size.Standard 36" bar fits doorsup to 36" (914mm).Optional 48" (1219mm)bar fits 36-1/2" (927mm) -48" (1219mm) door.
Door ThicknessStandard: 1-3/4" (44mm).
Stile (Rim)Minimum width 2-1/2"(64mm) with standard 1/2"(13mm) stop.
Projection4-7/8" (124mm); 3-1/8"(80mm) depressed.
CasesHeavy cast, 7-1/4"(184mm) x 1-1/4" (32mm).
CrossbarStandard: 13/16" (21mm)x 1-3/8" (35mm) ovalseamless tubing.
WarrantyOne-year limited.
Certification/ComplianceANSIMeets A156.3, Grade 1.Meets A117.1 AccessibilityCode.
UL / cULAll exit devices listed forsafety as panic hardware. 3-hour fire rated deviceslisted as fire exit hardwarefor A label and lesser classhardware.
California State ReferenceCode
NFPAAll exit devices comply withNFPA 101 Life Safety Code.
ADAExit devices, lever trimsand pulls comply withAmericans with DisabilitiesAct.
FinishesBHMA 605, 606, 611, 612,613, 622, 625, 626, 629, 630.
D Grip Operator03
DirkeD4
Round GripT12M
Corbin Russwin Product Guide.34
Applications/Features
ED8000 Series
ApplicationsIdeal for high-use situations in new construction andrenovations.
Advantages• Meets ANSI Grade 1 requirements.• Heavy-duty steel construction.• Easy-to-use pushbar operation for quick egress and ADA
compliance.• Low profile and projection for barrier-free code compliance.• No projecting parts to inhibit egress.• Through-bolted trims for strength and security.• Variety of finishes, trims and styles to match other
Corbin Russwin products.
TrimsKey-in-lever, key-in-knob and pull trims available in fivefunctions. Consult ED8000 catalog for complete listing ofdesigns and functions.
ED8200 Series Exit Devices - Panic & Fire LabeledRefer to appropriate Exit Device Catalog for a complete listing ofeach series’ applications.
ED8400 Series Exit Devices - Surface Vertical Rod,Panic & Fire Labeled.
GlobalG10
Wing PullP8
FeaturesBar Length Easily field cut to size.Standard 36" bar fits doors31" (787mm) - 36" (914mm). Door ThicknessStandard: 1-3/4" (44mm). Backset2-3/4" (70mm) for 5/8"(16mm) stop. Device andtrim cover standard ANSIA115.2 (Type 161)cylindrical lockpreparation. StileMinimum width 5"(127mm). Projection2-1/2" (64mm).Latchbolt (Rim)3/4" (19mm) stainless steelpullman type with stainlesssteel deadlocking latch.Alarm KitOptional on ED8200(B)devices; emits audiblealarm, signaling emergencyor unauthorized use ofdoor. Available in kit formor factory installed.DoggingStandard on ED8200 andED8400 devices. FastenersStandard: machine screws. Cylinder Optional, when specified. WarrantyOne-year limited.
Certification/ComplianceANSIMeets A156.3, Grade 1.Meets A117.1 AccessibilityCode.UL / cULAll exit devices listed forsafety as panic hardware. 3 hour fire-rated deviceslisted as fire exit hardwarefor A label and lesser class.1-1/2 hour fire-rateddevices listed as fire exithardware for B label andlesser class.WHI (Warnock HerseyInternational) - Rim Only 1-1/2 hour fire-rateddevices listed for B labeland lesser class 4' x 8'single or 8' x 8' doubledoors. Rear cover labelindicates listing.
California StateReference CodeNFPAAll exit devices comply withNFPA 101 Life Safety Code.ADAExit devices, lever trimsand pulls comply withAmericans with DisabilitiesAct.FinishesBHMA 689, 690, 691, 605,606, 611, 612, 613, 622,625, 626. Painted finisheson devices. Painted orplated finishes available ontrims.
PrincetonPR6
Corbin Russwin Product Guide.35
Applications/Features
ED5000 Series
ED5000 Up to 10' Fire Rated Exit Devices
ApplicationsThe ED5000 Series meets the 1-1/2 Hour UL “B” Fire Ratingstandards for surface verticalrod, concealed vertical rod, andless bottom rod applications ondoors up to 10'.
Advantages• Less bottom rod devices
eliminate catch hazards and prevent damage to bottom rods
• Two-point latch surface and concealed vertical rod devices useful in higher security situations
• Less bottom rod devices provide code compliance without a floor strike
• UL listings for fire doors up to 4' x 10' (8' x 10' pairs)
• SVR less bottom rod devices are ADA compliant
ApplicationsDesigned for applications in high use situations, idealfor new construction and renovations.
Advantages• Meets ANSI Grade 1 requirements• Easy-to-use pushbar for quick egress and ADA
compliance• Heavy-duty construction• Quiet operation• Low projection for barrier-free code compliance• Closed on all sides - no projection parts to inhibit egress• Wide range of finishes, trims, and styles to match
other Corbin Russwin products.• Through-bolted trims for strength, security, durability,
smooth operation and easy installation• One-point dogging on panic devices• Devices available to satisfy UL safety and fire label
requirements
ED5200 Series Rim and SecureBolt™ ExitDevices - Panic & Fire Labeled, Metal and WoodDoors. (Rim not pictured)
Refer to appropriate Exit Device Catalog for a complete listingof each series’ applications.
ED5400 and ED5470 SVR Series ExitDevices - Surface Vertical Rod, Up to 10',Panic & Fire Labeled, Less Bottom Rod, Metal & Wood Doors
ED5800 and ED5860 CVR Series Exit Devices - Concealed Vertical Rod,Up to 10', Panic & Fire Labeled, Less Bottom Rod, Metal & Wood Doors(not pictured)
ED5600 Mortise Lock Type Exit Devices -Panic & Fire Labeled, Metal & Wood Doors
FeaturesBar Length Easily field cut to size.Standard 36" (914mm) barfits 30" (762mm) - 36"(914mm) door. Optional48" (1219mm) bar fits 36"(914mm) - 48" (1219mm)door, 24" (610mm)bar fits24" (610mm) - 30"(762mm) door.
Door Thickness1-3/4" (44mm) standard.
StileMinimum width 4-1/2"(114mm).
Projection3-1/4" (83mm) active, 2-3/4" (70mm) dogged.
WarrantyFive-year limited on devicesand 9 series trim. One-year limited on 7series trim and electroniccomponents.
Certification/ComplianceANSIMeets ANSI 156.3, Grade 1.Meets A117.1 AccessibilityCode.
UL/cULAll exit devices listed forsafety as panic hardware. 3-hour fire rated deviceslisted as fire exit hardwarefor A label and lesser class.1-1/2 hour fire rateddevices listed as fire exithardware for B label andlesser class.
California State ReferenceCodeThis product has beenapproved by the CaliforniaState Fire Marshal pursuantto section 13144.1 of theCalifornia Health & SafetyCode.
NFPAAll exit devices comply withNFPA 101 Life Safety Code.
ADAExit devices, lever trimsand pulls comply withAmericans with DisabilitiesAct.
FinishesBHMA 605, 606, 611, 612,613, 625, 626, 629, 630.
Corbin Russwin Product Guide.36
Applications/Features
ED5000 Series
ED5000 Series Trim9 Series Heavy-Duty Trim Features• Free-wheeling vandal resistant
design• Beveled edges• Through-bolted to exit device• Flush cylinder with 6-pin cylinder
applications• Available with Vineyard Collection
levers
7 Series Trim Features• Free-wheeling lever• Through-bolts to exit device• Welded posts• Available with lever, knob, pull or
thumbpiece designs
Trim Functions
Refer to ED5000 catalog for a completelisting of trim designs and options.
Removable MullionsUsed to install two rim exit devices in adouble door opening. May be quickly andeasily removed when a full double dooropening is temporarily required. Keyremovable option (KM) and retrofit kits(KRM700A) are available. Prime coat greypainted BHMA 600. Available withmullion stabilizer kit.
Mullion Stabilizer KitControls the movement of the mullion.Recommended for openings over 7' high,or whenever door movement must beminimized.
Materials and FinishTubular steel mullion, 1-1/2" (32mm) x 3"(76mm), with malleable iron top andbottom mounting plates; furnished withzinc plated fasteners for metal frames andconcrete floors. May be cut, drilled andtapped in field for Rim Exit Devices.Prime coat gray painted BHMA 600.
Angle Bracket(optional)
Upper MountingBracket
Steel Mullion
Mullion Pad
Lower MountingBracket
Maximum UL Listing Mullion Opening Height Part No.
3-Hour 7’0” 707A
3-Hour 8’0” 708A
Panic Only 10’0” 710 Keyed RemovableMullion
Type ANSI FunctionPassage - 10
Dummy F02 50
Classroom F08 55
Nightlatch F03 57
Storeroom F09 59
NewportN9
EscutcheonF9
FrascatiFR9
MerlotM9
TuscanyTS9
ZinfandelZ9
Offset PullP9
DirkeD7
GlobalG7
Corbin Russwin Product Guide.37
Applications/Features
ED4000 Series - Narrow Stile
ApplicationsDesigned for narrow stile applications on full glass doorsin high-use and high-abuse situations.
Advantages• Meets ANSI Grade 1 requirements• Easy-to-use pushbar for quick egress and ADA compliance• Heavy-duty construction• Quiet operation• Low projection for barrier-free code compliance.• Closed on all sides - no projection parts to inhibit egress• Wide range of designs and finishes to match other
Corbin Russwin products• Through-bolted trims for strength, security, durability,
smooth operation and easy installation.• One-point dogging on panic devices
TrimsLever, knob, thumbpiece and operator trims available.Consult ED4000 catalog for a complete listing of designsand functions.
Used to install two rim exitdevices in a double dooropening. May be quickly andeasily removed when a fulldouble door opening istemporarily required. Mullionstabilizer kit suppliedstandard. Aluminum mullionavailable in 628 and 695finishes. Specify 808 x Finish. ED4400 Series Exit Devices -
Surface Vertical Rod, Panic Only
Refer to appropriate Exit Device Catalog for a complete listing of each series’ applications.
ED4200 Series Rim and SecureBolt™ Exit Devices -Panic Only, (SecureBolt not pictured)
ED4800 Series Exit Devices - Concealed Vertical Rod,Panic Only, Aluminum Store Front Door (not pictured)
Upper MountingBracket
Extruded AluminumMullion
Strikes (2)(Integral withMullion)
Mullion Stabilizers(2 Sets Standard)
Lever MountingBrackets
FeaturesBar LengthEasily field cut to size.Standard 36" (914mm) barfits 30" (762mm)-36"(914mm) door. Optional48" (1219mm) bar fits 36"(914mm) - 48" (1219mm)door, 24" (610mm) bar fits24" (610mm)- 30"(762mm) door.
Door Thickness1-3/4" (44mm) standard.
StileMinimum width 2"(51mm)
Projection3-1/4" (83mm) active, 2-3/4" (70mm) dogged.
WarrantyFive-year limited ondevices. One-year limitedon trim.
Certification/ComplianceANSI Meets ANSI 156.3, Grade 1.Meets A117.1 AccessibilityCode.
UL / cULAll exit devices listed forsafety as panic hardware. 3-hour fire-rated deviceslisted as fire exit hardwarefor A label and lesser classhardware.
California State ReferenceCodeThis product has beenapproved by the CaliforniaState Fire Marshalpursuant to section13144.1 of the CaliforniaHealth & Safety Code.
NFPAAll exit devices comply withNFPA 101 Life SafetyCode.
ADAExit devices, lever trimsand pulls comply withAmericans with DisabilitiesAct.
FinishesBHMA 605, 606, 611, 612,613, 625, 626, 629, 630.
EssexE8
Pull/ThumbpieceT14
Plate x Thumbturn08
Removable Mullions
Corbin Russwin Product Guide.38
Applications/Features
DC2000, DC3000 Series
ApplicationsDC2000Proven effective in high-use, high-abuse environments.Ensures reliable latching for access control and fire andbarrier-free code compliance. Ideal for virtually all dooropenings and draft conditions in both new and retrofitconstruction. 10-year limited warranty.
DC3000The mid-priced, cost effective choice for high trafficsituations. Ideal for both new construction andrenovations while ensuring fire and barrier-free codecompliance. 5-year limited warranty.
QUIK-INSTALL™mounting bracket allowsfast, accurate installation
Backcheck intensityvalve with safetyfeature maintainssafe internalpressure
Tapered valvesallow infiniteadjustment forcorrectperformance(latching speed,delayed action,backcheckintensity, closingspeed)
Closing speed valve
Latching speed valve
Optional delayed action valve offersadjustable timing for compliancewith accessibility codes
Multiple backcheck location valvepermits choice of 70o or 90o
backcheck setting on DC2000 only
FeaturesSpringDC2200 closers: multi-sized; fullyadjustable 1 through 6.DC2400 closers: sizes 1 through 6; half-size adjustability.DC2600 closers: sizes 1 through 6:non-adjustable.DC3200 closers: multi-sized; fullyadjustable 1 through 6.DC3600 closers: sizes 1 through 5;non-adjustable.
BodyCast iron case with seamless one-piece forged steel spring tube.
ArmStandard; heavy-duty forged steel.
SpindleTriple heat treated steel.
PistonPrecision machined, heat treatedsteel.
SpringsDouble heat treated steel, tempered.
BackcheckMultiple backcheck location valvepermits choice of 70° or 90°backcheck setting. DC2000Series only.
ValvesBackcheck intensity valve with safetyfeature on DC2200, DC2400,DC2600, and DC3200 Series.Optional on DC3600 latching andclosing speed standard all series,delayed action optional all series.
SealsO-rings.
FluidHigh lubricity hydraulic fluidstandard.
Degree of OpeningUp to full 180° opening standard forregular, top jamb and parallel armmountings.
Mounting BracketQUIK-INSTALL™ mounting bracketstandard.
WarrantyFive-year limited on DC3000. Ten-year limited on DC2000.
FinishesBHMA 600, 689, 690, 691, 693, 696.
ElectromechanicalAvailable with magnetic hold-openand smoke detector.
Certifications/ComplianceANSIMeets A156.4, Grade 1. Meets A117.1Accessibility Code.
FederalMeets FF-H-121D, Type 3000.
UL/ULCListed for fire and cyclerequirements. This includesconformance to UL10C and UBC 72-1997
Barrier-Free Code Compliance *Closers conform to the 5 lbf.maximum door opening forcerequirement for non-fire-ratedinterior hinged doors, according to:
Americans with Disabilities Act (ADA) American National Standards Institute(ANSI)
Corbin Russwin Product Guide.39
Applications/Features
DC2000, DC3000 Series
Advantages• Meets or exceeds ANSI A156.4 Grade 1 requirements.• Compliance with building and barrier-free codes.• Up to full 180° door opening.• Unique pressure-relief backcheck intensity valve
includes safety feature to maintain correct internal pressure.
• One-piece seamless steel spring tube seals in hydraulic fluid.
• Cast iron body.• QUIK-INSTALL™ mounting bracket speeds
installation, reducing cost and errors.• Ten-year limited warranty on DC2000 Series.
Full CoverStandard on all DC2000 and DC3000Series Door Closers. Completelycovers closer body. Reversible forregular and parallel arm mountings.For top jamb mounting, specify hand.2-3/4" (70mm) x 11-9/16" (294mm) x2-15/16" (75mm). Painted and platedfinishes.
Slim Cover Non-handed. Cap coversbottom of spindle. Optional for allDC2000 and DC3000 Series. 1-3/4"(44mm) x 2-3/4" (70mm) x 11-3/8"(289mm). Available in painted finishes.
Full Metal Cover For use in high-abuse applications,such as schools and detentionfacilities. For all mountings, specifyhand. 2-3/4" (70mm) x 11-7/16"(290mm) x 2-13/16" (71mm). Paintedand plated finishes. Optional onDC2000 Series only.
Covers
Corbin Russwin Product Guide.40
Applications/Features
DC4600 Series
ApplicationsDesigned for light-duty applications, ideal for residences,offices and retail outlets.
Advantages• Universal mounting.• Valve adjusts for closing and latching speeds.• Allows full 180° door opening.• Low projection - just 2-7/8" (73mm).• 2-year limited warranty.
Narrow width
Single valve adjustsclosing and latchingspeeds
Universal mounting
Low projection
FeaturesSpring Sizes 2, 3, 4 and 5 available, non-adjustable.
HandingUniversal, non-handed.
BodyCast aluminum.
ArmStandard: steel main arm and tubularsteel turnbuckle frame.
SpindlePrecision machined steel.
PistonPrecision machined steel.
SpringsTempered steel.
ValveStandard: 2 closing speed valves adjustclosing speed and latching speed.Backcheck intensity valve buffers dooropening after 70°.
SealsO-rings.
FluidHigh lubricity hydraulic fluidstandard.
Degree of OpeningUp to full 180° opening standard forregular, top jamb and parallel armmountings, conditions permitting.
Power Adjustment Arm Bracket15% ± (7-1/2%) adjustmentstandard.
MountingsStandard: regular and top jamb.Optional: paralled arm mounting.
FastenersStandard: machine screws and sheetmetal screws are packed with all closers.
WarrantyTwo-year limited.
Certification/ComplianceUL/ULCListed for closers with non-hold openarms. This includes conformance toUL10C and UBC 72-1997.
FinishesBHMA 600, 689, 690, 691, 693, 696.
Corbin Russwin Product Guide.41
Applications/Features
DC2000 Series
Regular ArmDC2200-DC2400-DC2600Used with regular arm mounting (pull side) and top jambmounting (push side).
Regular Arm with Hold Open*DC2200xA1-DC2400xA1-DC2600xA1Permits door to remain in hold open position.
Heavy-Duty Regular ArmDC2200xA10-DC2400xA10-DC2600xA10Recommended for high-use, high-abuse environments.
Parallel ArmDC2210-DC2410-DC2610Regular arm plus parallel arm mounting bracket; mountedon push side.
Parallel Arm with Hold Open*DC2210xA1-DC2410xA1-DC2610xA1Permits door to remain in hold open position.
Heavy-Duty Parallel ArmDC2210xA3-DC2410xA3-DC2610xA3Recommended for high-use, high-abuse environments.
* Not allowed by code on fire doors
Corbin Russwin Product Guide.42
Applications/Features
DC2000 Series
Heavy-Duty Parallel Arm with Hold Open*DC2210xA2 - DC2410xA2 - DC2610xA2Recommended for high-use, high-abuse environments.
Heavy-Duty Reversible Backstop Parallel ArmDC2210xA4 - DC2410xA4 - DC2610xA4Recommended for high-use, high-abuse environments.
Heavy-Duty Reversible Backstop Parallel Arm with Hold-Open*DC2210xA5 - DC2410xA5 - DC2610xA5Recommended for high-use, high-abuse environments.
Heavy-Duty Spring Stop Parallel ArmDC2210xA11 - DC2410xA11 - DC2610xA11Recommended for high-use, high-abuse environments.
Heavy-Duty Spring Stop Parallel Arm with Hold Open*DC2210xA12 - DC2410xA12 - DC2610xA12Same as spring stop above, with hold open.
Pull Side Track ArmDC2230 - DC2430 - DC2630Maximum 100o opening.
Pull Side Track Arm with Hold Open*DC2230xA1 - DC2430xA1 - DC2630xA1Hold open can be set for 85°, 90°, 95°, or 100°.
* Not allowed by code on fire doors
Corbin Russwin Product Guide.43
Applications/Features
DC2000 Series
Push Side Track ArmDC2240 - DC2440 - DC2640Provides a clean aesthetic look for doors opening a maximum of100° and a minimum door width of 32" (813mm).
Push Side Track Arm with Hold OpenDC2240xA1 - DC2440xA1 - DC2640xA1Same as Track Arm with the addition of hold open that may bepositioned on door to allow hold open from 85° to 100°.
Top Jamb Deep Reveal Arm (3-3/8" - 7-1/4")DC2220xA6 - DC2420xA6 - DC2620xA6Accommodates top jamb mounting for reveals up to 7 -1/4"(184mm) depending on door and frame conditions; mounted onpush side.Code A6 - Non-hold openCode A8 - Hold open
Top Jamb Extra-Deep Reveal Arm (7-3/8" - 11")DC2220xA7 - DC2420xA7 - DC2620xA7Permits top jamb mounting (push side) for reveals of 7 -3/8"(187mm)- 11" (279mm) depending on door and frameconditions.Code A7 - Non-hold openCode A9 - Hold open
QUIK-INSTALLTM Mounting BracketUnique cost-saving feature, standard on all DC2000 and DC3000closers.Part #: 188F03-8 x Finish
Corbin Russwin Product Guide.44
Applications/Features
ML2200 ECA Series
ApplicationsPermits remote locking and unlocking of doors by meansof a solenoid-operated actuator which is attached to thestrike and mounted in a metal door frame. Ideal forhigh-security applications that must also meet life safety.
Advantages• Utilizes the proven ML2200 Series Mortise Lockset.• Minimal power requirements – lock is designed to lock
or unlock as the situation demands.• No special door or frame preparation required.• Actuator fits ANSI strike preparation.• Mechanical cylinder override available.• Full range of voltages: 12 and 24 volt AC and DC, also
120VAC.• Non-critical alignment.• Mortar guard furnished standard.
6-pin solid brass cylinderstandard; CorbinRusswin and competitivecylinder compatibilityavailable
Utilizes proven Corbin RusswinML2200 Series Mortise Lockset
Fits standard mortiselock door prep
All CorbinRusswin trimdesigns available
Solenoid-operatedactuator fits standardANSI strike prep
FeaturesHandingHanded, field reversible.
Door Thickness1-3/4" (44mm) only.
Backset2-3/4" (70mm) standard.
Lock ChassisHeavy gauge chrome plated steel. 5-7/8" (149mm)
FrontHeavy gauge steel: 8" (203mm) x 1-1/4"(32mm), square corner, beveled, for3/32" (2mm). Accommodates flatdoors and doors beveled 1/8" (3mm) in2" (51mm).
Latchbolt2-piece mechanical, brass, with stainlesssteel anti-friction insert, 5/8" (16mm) x1" (25mm) x 3/4" (19mm) throw.
Auxiliary Latchbolt9/16" (14mm) effective throw and3/8" (10mm) effective auxiliary latchdeadlocking.
HubKnob: nickel steel, 3/8" (10mm) x 5/16"(8mm). Lever: steel 8mm.
SpacingC. to c. knob/lever to cylinder: 3-5/8"(92mm).C. to c. knob/lever to thumbturn: 2-7/16" (62mm).
StrikeWrought brass or bronze. ANSI straightlip standard 4-7/8" (124mm) x 1-1/4"(32mm) x 1-1/8" (29mm) lip to center.The ML2200ECA is appropriate onlyfor metal door and frame preparations,and is offered only with mortise locksand ANSI standard strike plates.
TrimAvailable with all ML2200 Series trimdesigns.
CylinderBrass, 6-pin, L4 keyway, 0-bittedstandard.
KeysTwo nickel silver std.
Keying Features Available Master keyingConstruction master keyingVisual key controlConcealed key controlPlug only to show (concealed shell)7-pin cylinderSecurity cylinderPyramidInterchangeable core (IC)Pyramid ICSecurity ICBlockout cylinderFlex head cylinder
Warranty One-year limited.
Operating Current 120VAC 0.15AMPS+/- 10V 24VAC0.75AMPS+/- 2V 24VDC 0.75AMPS+/-2V 12VAC 1.50AMPS+/- 1V 12VDC1.50AMPS+/- 1V Six-inch pigtail supplied standard. Ten-foot connecting cable supplied standardon 120VAC units.
Certification/Compliance
ANSI Meets A156.13 Series 1000, Grade 1.Meets A117.1 Accessibility Code of theADA.
Federal FF-H-106C.
California State Reference Code(Formerly Title 19, California State Fire MarshalStandard)
All levers with returns comply; leversreturn to within 1/2" (13mm) of doorface.
UL/ULCAll locks listed for A label doors, 4' x 10'single or 8' x 10' pair. Letter F and ULsymbol on armored front indicatelisting.
FinishesBHMA 605, 606, 611, 612, 613, 625,626, 629 and 630.
Corbin Russwin Product Guide.45
Applications/Features
ML2200 ECA Functions
ML2200 ECA
ML22906
ML22950
ML22907
ML22960
Function Description- Latchbolt by grip either side, unless outside grip is locked by energizing solenoid.- Latchbolt by key outside when solenoid is energized.- Inside grip always free.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side, unless outside grip is locked by energizing solenoid.- Inside grip always free.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side, unless both grips are locked by energizing solenoid.- Latchbolt by key outside when solenoid is energized.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side, unless both grips are locked by energizing solenoid.- Auxiliary latch deadlocks latchbolt.
The following functions are locked when power is on (Fail Safe).
ML2200 ECA
ML22908
ML22970
ML22909
ML22980
Function Description- Latchbolt by grip either side only when the solenoid is energized.- Outside grip locked when solenoid is not energized.- Latchbolt by key outside when solenoid is not energized.- Inside grip always free.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side only when solenoid is energized.- Outside grip locked when solenoid is not energized.- Inside grip always free.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side only when solenoid is energized.- Both grips locked when solenoid is not energized.- Latchbolt by key outside when solenoid is not energized.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side only when solenoid is energized.- Both grips locked when solenoid is not energized.- Auxiliary latch deadlocks latchbolt.
The following functions are unlocked when power is on (Fail Secure).
Corbin Russwin Product Guide.46
Applications/Features
ML2200 ECL Series
ApplicationsIdeal for door control where increased security is necessary atall times, the ML2200 ECL Series provides solenoid-operatedremote locking and unlocking utilizing the proven ML2200Series Mortise Lockset.
Advantages• Utilizes the proven ML2200 Series Mortise Lockset.• Self-contained integral solenoid allows installation in
standard mortise prep.• Minimal power requirements - lock is designed to lock or
unlock as the situation demands.• Available in AC or DC, 12 or 24 volt systems.• Mechanical cylinder override available.• Available as Fail Safe or Fail Secure.
Heavy-duty anti-friction latch standard
Heavy-gaugeinternal parts
One-piece, corrosion-resistant, heavy-gauge steel front
Available to matchCorbin Russwin trimdesigns
6-pin solid brasscylinder; CorbinRusswin andcompetitive cylindercompatibilityavailable
ML2200 ECL
ML22910
ML22920
ML22901
ML22903
Function Description- Latchbolt by grip either side, unless outside grip is locked by
energizing solenoid.- Inside grip always free.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side, unless both grips are locked by energizing solenoid.
- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side, unless both grips are locked by energizing solenoid.
- Latchbolt by key outside when solenoid is energized.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side, unless outside grip is locked by energizing solenoid.
- Latchbolt by key outside when solenoid is energized.- Inside grip always free.- Auxiliary latch deadlocks latchbolt.
The following functions are locked when power is on (Fail Safe).
ML2200 ECL
ML22930
ML22940
ML22904
ML22905
Function Description- Latchbolt by grip either side, only when solenoid is energized.- Outside grip locked when solenoid is not energized.- Inside grip always free.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side, only when solenoid is energized.- Both grips locked when solenoid is not energized.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side, only when solenoid is energized.- Both grips locked when solenoid is not energized.- Latchbolt by key outside when solenoid is not energized.- Auxiliary latch deadlocks latchbolt.
- Latchbolt by grip either side, only when solenoid is energized.- Outside grip locked when solenoid is not energized.- Latchbolt by key outside when solenoid is not energized.- Inside grip always free.- Auxiliary latch deadlocks latchbolt.
The following functions are unlocked when power is on (Fail Secure).
FeaturesHandingHanded, field reversible.Door Thickness1-3/4" (44mm) only.Backset2-3/4" (70mm) standard.Lock ChassisHeavy gauge chrome platedsteel. 5-7/8" (149mm)FrontHeavy gauge steel: 8"(203mm) x 1-1/4" (32mm),square corner, beveled, for3/32" (2mm). Accommodatesflat doors and doors beveled1/8" (3mm) in 2" (51mm).Latchbolt2-piece mechanical, brass, withstainless steel anti-frictioninsert, 5/8" (16mm) x 1"(25mm) x 3/4" (19mm)throw.
Auxiliary Latchbolt9/16" (14mm) effective throwand 3/8" (9.5mm) effectiveauxiliary latch deadlocking.HubKnob: nickel steel, 3/8"(9.5mm) x 5/16" (8mm).Lever: steel 8mm.Spacing C. to c. knob/lever to cylinder:3-5/8" (92mm). C. to c.knob/lever to thumbturn: 2-7/16" (62mm).StrikeWrought brass or bronze.ANSI straight lip standard 4-7/8" (124mm) x 1-1/4"(32mm) x 1-1/8" (29mm) lipto center. TrimAvailable with all ML2200Series trim designs.CylinderBrass, 6-pin, L4 keyway, 0-bitted standard.
KeysTwo nickel silver std.Keying Features Available Master keyingConstruction master keyingVisual key controlConcealed key controlPlug only to show
(concealed shell)7-Pin cylinderSecurity cylinderInterchangeable coreSecurity ICBlockout cylinderFlex Head cylinderPyramidPyramid ICWarrantyOne-year limited.Operating Current12VAC 0.8AMPS+/- 1V12VDC 0.8AMPS+/- 1V24VAC 0.4AMPS+/- 2V24VDC 0.4AMPS+/- 2V
Certification/ComplianceANSIMeets A156.13 Series 1000,Grade 1. Meets A117.1Accessibility Code of the ADA.FederalFF-H-106C.California State Reference Code(Formerly Title 19, California State FireMarshal Standard)All levers with returns comply;levers return to within 1/2"(13mm) of door face.UL/ULCAll locks listed for A labeldoors, 4' x 10' single or 8' x 10'pair. Letter F and UL symbolon armored front indicatelisting.FinishesBHMA 605, 606, 611, 612, 613,625, 626, 629 and 630.
Corbin Russwin Product Guide.47
Applications/Features
Electrified CL3300 Series
ApplicationsDesigned to provide solenoid-operated remote lockingand unlocking, utilizing the proven CL3300 SeriesCylindrical Lockset. Ideal for door control whereincreased security is necessary.
Advantages• Meets or exceeds ANSI Grade 1 requirements.• Self-contained integral solenoid allows installation in
standard cylindrical prep.• Minimal power requirements – lock is designed to
lock or unlock as the situation demands.• Available in AC 12 or 24 volt systems. (Locks are
universal for AC or DC.)• Mechanical cylinder override.• Available as Fail Safe or Fail Secure.• Cylinder options same as CL3300. See page 17.
Electrified CL3300 Functions
CL3300CL33903Fail Safe
CL33905Fail Secure
Function Description
- Deadlocking latchbolt by lever either side, except when power on locks outside lever.
- Power off/unlocks outside lever.- Inside lever always free.- Latchbolt retracted by key when locked electrically.
- Deadlocking latchbolt by lever either side, except when power off locks outside lever.
- Power on/unlocks outside lever.- Inside lever always free.- Latchbolt retracted by key when power is off.
Self-containedsolenoid
3 solid, cast lever options,non-handed with LEVERRELEASE design
Anti-rotationalthrough-bolts at 6and 12 o'clockpositions
Heavy-duty leverreturn springs
FeaturesElectrical Requirements250MA @ 12VAC/DC, 150MA @24VAC/DC (Locks are universal forAC or DC.)
Door Thickness1-3/4" (44mm) - 2" (51mm).
Continuous Duty Solenoid
Certification/ComplianceANSI Meets A156.2 Series 4000, Grade 1.Meets A117.1 Accessibility Code of theADA.
UL/ULC All locks listed for A label and lesserclass single doors, 4' x 10'.
Corbin Russwin Product Guide.48
Applications/Features
ED66900 Series Electrically Controlled Mortise Exit Device
ApplicationsDesigned to utilize the safety features of the heavy-duty mortisecrossbar exit device and the added security of an electricallycontrolled exit (ECE).
Advantages• Proven reliability and durability of the Corbin Russwin
Mortise Lockset.• Available as Fail Safe or Fail Secure.• Key always retracts latchbolt.• Integral solenoid.• Low voltage AC or DC systems available.• Accepts wide range of trims.
6-pin solid brasscylinder standard;Corbin Russwin andcompetitive cylindercompatibility available
Self-containedsolenoid
Can accommodateknob, lever orthumbpiece trim
Fits standard doorprep
Utilizes industryproven CorbinRusswin ML2200Series MortiseLockset
FeaturesHandingField reversible device; specify hand.Mortise lock and strike not reversible.
Bar LengthEasily field cut to size. Standard 36"(914mm) bar fits doors up to 36"(914mm).
Door ThicknessStandard: 1-3/4" (44mm).
Backset2-3/4" (44mm).
StileMinimum width 5" (127mm).
Projection5-3/4" (146mm); 4-1/2" (114mm)depressed.
LatchboltBrass, 3/4" (19mm) throw.
Auxiliary LatchBrass.
Front8"(203mm) x 1-1/4"(32mm) heavygauge steel. Accommodates flatdoors and doors beveled 1/8" (3mm)in 2" (51mm).
MaterialBrass, bronze or stainless steel.
CasesHeavy wrought, 7-1/2"(190mm)x 2-9/16"(65mm).
CrossbarStandard: 13/16"(21mm) x 1-3/8"(35mm) oval seamless tubing.
DoggingDogging standard.
FastenersStandard: machine screws.
StrikeStandard: ANSI strike.
CylinderOptional when specified.
Operating Current12VAC 0.8 AMPS, 12VDC 0.8AMPS,24VAC 0.4AMPS, 24VDC 0.4AMPS.
Certification/ComplianceANSIMeets A156.3, Grade 1.
UL/cULAll exit devices listed for safety aspanic hardware; devices comply withUL 305 standards for panic hardware.UL symbol on active head indicateslisting.
NFPAAll exit devices comply with NFPA101 Life Safety Code.
FinishesBHMA 605, 606, 611, 612, 613, 622,625, 626, 629, 630.
Corbin Russwin Product Guide.49
Applications/Features
Electrified ED4000/ED5000 Series
ApplicationsThe ED4000 and ED5000 offer a complete range ofelectrical options while maintaining a continuum inappearance, security and functions. Ideal for use withmonitoring security and alarm systems of most buildings.
Electric DoggingOperationElectric dogging feature providescontinuous latch retraction andtouchbar dogging simultaneously.When power is applied to the exitdevice, depressing the pushbar willcontinuously hold the pushbar downand the latchbolt retracted in theunlocked position. Removal orinterruption of power will release thepushbar and the latch will extend.
ApplicationSecureBolt™ Exit DeviceRim Exit DevicesConcealed Vertical Rod Exit DevicesSurface Vertical Rod Exit DevicesMortise Exit Devices
ListingsUL listed for both Panic and Fire ExitHardware.
Electrical Specifications.35 Amps @ 24VDC-continuous duty(2) 36-volt holding magnets holdingforce (86Lbf. total). Requires a power transfer by others.Standard 24VDC power supplyrequired.
OrderingSpecify Quick Code M97.
Electric Latch PullbackContinuous-duty solenoid retracts thebolt(s) for momentary or maintainedperiods of time.
OperationLatch Pullback provides a remotemeans of unlocking exit devices.
ApplicationSecureBolt Exit DeviceRim Exit DevicesConcealed Vertical Rod Exit DevicesSurface Vertical Rod Exit DevicesMortise Exit Devices
ListingsUL listed for both Panic and Fire ExitHardware.
Electrical SpecificationsRequires 781N Controller (120VACinput, output sequencer for one ortwo devices). Requires a 4-wireelectrical pivot or hinge by others.
Solenoid5.5 volt solenoid with 36 volt holdingmagnet (.172 Amp).9 Amp in rush @ 28VDC..180 Amps holding continuous duty.Device bolts remain retracted for aslong as the device is energized.Removal of power returns the deviceto the life safety, self-latchingmechanical mode.
Interface with central or local firealarm system, automatic dooroperators, magnetic door locks,electric strikes, and access controlsystems.
OrderingSpecify Quick Code M94.
Mortise Device Trim ControlOperationMortise Device trim control providesa remote means of locking orunlocking Mortise Exit Device Trim.
This feature is provided bycontinuous-duty solenoids in thedevice mortise lock.
ListingsUL listed for both Panic and Fire ExitHardware.
Electrical Specifications24VDC 330 milliamperesFail “-SAFE” units maintain the doorlocked as long as the device isenergized.
Fail “-SECURE” units maintain thedoor unlocked as long as the device isenergized.
Standard 24VDC power supplyrequired.
OrderingSpecify Quick Codes “SAF” for Safeor “SEC” for Secure.
Corbin Russwin Product Guide.50
Applications/Features
Electrified ED4000/ED5000 Series
MPS Power SupplyOperationPower supplies are designed to providereliable filtered and regulated power forlong life to a variety of electrifiedhardware components. All modularpower supplies are field-selectable for 12& 24 VDC and are designed to meet UL1481 Standards. Recommended for theSAF, SEC, M97, delayed egress exitdevices and electric trim.
Features• Fire panel emergency release input• PC Board mounted system LED
indicator • Field-selectable 12 or 24 VDC output• Regulated and filtered with input
and output protection• Battery charging is provided from a
separate output terminal
Electrical Specifications• Inputs: 115VAC @600mA (230 VAC
optional), 50Hz/60hZ• Outputs: 12/24 VDC @ 1 AMP, 1.5
AMP or 4 AMP, Filtered and regulated output
Listings• UL & cUL listed 1012 General
Purpose Power SupplyApplications• D – Delayed Egress• M97 – Electric Dogging• SAF – Fail Safe mortise device trim
control• SEC – Fail Secure mortise device
trim controlOrderingMPS10 and MPS15 power supplies areavailable through Corbin Russwin. Toorder, specify MPS10 or MPS15.
MonitorsOperationMonitors are used to indicate theunauthorized use of an opening or tosignal and control other openinghardware, such as magnetic locks.The monitoring devices are equippedwith one internal single-pole double-throw (SPDT) switch per monitor.
Touchbar monitoring “M92” providesindication of the touch bar beingdepressed. Also used as Request toExit Switch(REX).
Outside Trim monitoring “M93”provides indication of the devicebeing operated from the outside.
Bolt Position monitoring “M91”provides indication on the position ofthe latchbolt on rods.
ApplicationSecureBolt™,Rim Exit Devices, Concealed VerticalRod Exit Devices, Surface VerticalRod Exit Devices, Mortise ExitDevices
ListingsUL listed for both Panic and Fire ExitHardware.
Electrical Specifications5amps @ 28VDC SPDT contacts
OrderingTouchbar monitor specify “M92”Outside Trim monitor specify “M93”Bolt Position monitor specify “M91”
780 Power SupplyThe 780 provides 2Amps of outputcurrent at 24VDC. The 780 cancontrol a total of 5 electric DoggingDevices or 5 “Safe”/“Secure” MortiseExit Devices. A separate switchingdevice (key switch or push button)must be used to control the lockingdevice.
Specifications• 120VAC Input Power• 24VDC @ 2Amp Output• Fire Alarm Interface
781N ControllerThe 781N controller is designed tocontrol one or two electric latchpullback devices. Operation can beset for sequential or individualcontrol of doors. When using amomentary normally open contactswitch, the latch pullback delay timefeature can be adjusted from 1 to 20seconds. An input to interface withautomatic door operator controllersis provided. Fire alarm input is alsoprovided.
ListingListed as an Exit Device Control Unitto UL 294 requirements.
Specifications• 120VAC 60HZ• 9 Amp inrush for 100 milliseconds, • Holding voltage 28 VDC @ .180 Amps• Fire Alarm Interface
Corbin Russwin Product Guide.51
Applications/Features
Electrified ED4000/ED5000 Series
Monitor FunctionElectric Latch Retraction withMonitor Functions
Components• ED5200 - M94 x M92 Exit Device
with touchbar monitor• 781N Controller• 9411L2 Momentary Pushbutton
with Red and Green LEDs• DPS “Door Position Switch” by
Folger Adam• PT-2 18" Door Cord by Folger
Adam
OperationExit device allows free egress at alltimes.
Activating the 9411L2 push buttonretracts the latchbolt from a remotelocation.• The green LED indicates that the
door is closed and latched.• The red LED illuminates when any
of the following situations occur:- the touchbar is depressed- opening of door
Electric DoggingElectric Dogging with MonitorFunctions
Components• ED5200-M92 & M97 Electric
Dogging Device with touchbar monitor
• MPS 10 Power Supply with fire alarm interface
• 9231 Keyswitch with a Red and a Green LED
• ASSW-105A DPS “Door Position Switch” and Wire Transfer Hinge by Folger Adam
• PTH-4 Wire Transfer Hinge by Folger Adam (4 conductor)
OperationExit device allows free egress at alltimes. Activating the 9231 maintainedkeyswitch applies power to theED5200 M92 & M97 device. The firstmechanical depression of thetouchbar will retract the latchboltand hold the touchbar down in adogged position. Interruption ofpower or turning the keyswitch offwill release the touchbar and thelatch will extend.• The red LED illuminates when
power is on and the touchbar can be depressed and dogged.
• The green LED illuminates when power is off and the device can be latched for securing the door.
Latch PullbackElectric Latch Pullback interfacedwith an Automatic Door Operator
Components• ED5200-“M94” Latch Retraction• 781N Controller• *Powermatic® Door Controller• *ADA Pushbuttons #661• Wire Transfer by Folger Adam®
PTH-4
OperationExit device allows free egress at alltimes.
Activating the interior or exteriorpush button retracts the latchbolt inthe device and the door automaticallyopens. Door closes and relatchesafter hold open time has elapsed inthe operator.
ED5200 x M94
Corbin Russwin Product Guide.52
Applications/Features
Electrified ED4000/ED5000 Series Accessories
Key Switches
Push Button
Audible / Visual Annunciators
9231 - (1) SPDT Maintained9232 - (1) SPDT Momentary
Options• 1-3/4" Narrow face plate (suffix “N”)• L2 - two LEDs (red and green)
Specifications• Keyswitch for operation using a
standard 1-1/4" mortise cylinder (cylinder not included).
• Contact Rating 10 Amps @ 120VAC.• SPDT 3-position.
9411 - (1) SPDT Momentary9412 - (1) SPDT Maintained (Alt. Action)9511 - (1) SPDT Momentary
Option• L2 - two LEDs (red and green)
Specifications• SPDT form Z contact • 9400 - Rated 6AMP @120VAC• 9500 - Rated 12AMP @120VAC• 9500 Push button size - 1-9/16"
(40mm) diameter
3271 - Sonalert 90lb @ 2ft.12-24VDCMounted on one gang stainless steel plate.
3251-L2 - Two LEDs mounted on one gang stainless steel plate.12/24VDC (red and green)
9231 9231N
9511 9411/9412
3251L23271
Corbin Russwin Product Guide.53
Applications/Features
ED4000/ED5000 Series Delayed Egress Exit Device
The delayed egress option providesadditional security and safety in astrong line of panic hardware. Thedelayed egress exit device is anelectromechanical device used tosecure interior or exterior openings.The option is available for rim,SecureBolt, concealed vertical rodand mortise devices in all standardfinishes.
OperationThe exit door is normally closed andlatched. The Delayed Egress ExitDevice “D” secures the door in thelocked mode with the solid Red LEDindicating locked mode status.Depressing the push pad for less than3 seconds will sound the nuisancebeep without initiating the alarm.Depressing the exit bar for 3 secondsor longer will initiate an irreversiblelocal audible beeping tone and avisual amber indicator until thedevice releases. After the delay timeof 15 or 30 seconds the devicereleases, the LED changes to Green,and the alarm changes to a steadytone which continues to alarm untilmanually reset by key. The remotemonitoring contact outputs can beused to alert security personnel. Theperson depressing the exit bar isdenied egress for 15 or 30 secondsand security personnel are alerted. Note: The 15-second time delay isstandard. 30-second time delay isoptional (may be accepted by localjurisdiction).
Applications • For use on hollow metal, wood or
composite interior or exterior doors.• BOCA options available to comply
with National Building Code requirements. BOCA option is not suitable for installations in accordance with NFPA 101.
• 1-3/4" door thickness standard; 2 and 2-1/4" optional; specify D200 or D214 when ordering.
• Standard 36" device fits 36"doors only.Device cannot be cut less than 36".
• Option W048 fits doors 42"-48". Devices cannot be cut less than 42".
• Available for ED4000 and ED5000 Series SecureBolt™, rim, mortise and concealed vertical rod exit devices.
Standard Features
• Key Switch Operation:- Normal- Bypass- Reset/Delay
• Nuisance Delay• Remote Control Inputs:
- Remote Reset- Remote Bypass
Options • Bolt Position Monitor M91• Outside Trim Monitor M93• Mortise Electric Trim Control
SAF/SEC• 30 Second Delay M88
Required Accessories • Power Supply: A regulated and
filtered power supply with a Fire Alarm interface is required. 1 Amp minimum @ 24VDC per device. Special options will require more amperage. Consult factory.
• Power Transfer: Allows the power to make the transition from frame to door without pinching or removal of insulation.
Listing• UL/cUL Listed
– Controlled Exit Panic Device (FUKD/FUKD7)– Special Locking Arrangements (FWAX/FWAX7)
• BHMA (ANSI 156.3 and ANSI 156.24) Directory of Certified Exit Devices
Specifications • Input Voltage: 24VDC (+/- 10%)
Regulated and filtered.
Power Consumption • Standard Device: 500 mA• Device with Electric Trim Control:
1.5 Amp• Mortise Device with “Safe” or
“Secure” option: 1.5 Amp
Cylinder Utilizes a 1-1/8” mortise cylinder. Notincluded unless specified.
How to Order Suffix “D” to device: ED5200D.
Corbin Russwin Product Guide.54
Applications/Features
Alarm Kit for ED4000/ED5000
ApplicationsIdeal for high-use, high-abuse situations on narrow andregular stile doors in new construction and renovations.
Advantages• Meets or exceeds ANSI Grade 1 requirements.• Heavy-duty steel construction.• Easy-to-use crossbar operation for quick egress and
ADA compliance.• Low profile and projection for barrier-free code
compliance.• No projecting parts to inhibit egress.• Through-bolted trims for strength and security.• Wide range of trim styles and finishes to match other
Corbin Russwin products.
FeaturesActivationAlarm is activated when the exitdevice touchbar is depressed. Factorypreset for standard alarm modewhich automatically resets after 5minutes.
Continuous Alarm ModeAlarm sounds continuously when theexit device touchbar is depressed.Alarm must be manually reset bykeyswitch. (This feature is selected bya switch on the circuit board.)
Low Battery Warning Audible chirp.
Warning Decal “EMERGENCY EXIT-ALARM WILLSOUND”
Nuisance AlarmFactory preset for instant alarm.Selectable feature for alarm to soundwhen exit device touchbar isdepressed for more than 2 seconds.(This feature is selected by a switchon the circuit board.)
KitAvailable in kit form for field retrofit.Order ED40AK or ED50AK Kit.
Arming Delay / Authorized Egress10-second delay (after arming)permitting egress (by turning keyclockwise).
Alarm ShuntIngress shunt alarm input for deviceswith signal & outside trim monitors(M91 & M93).
Power RequirementsOne 9 volt battery (included).
Decibels90 db @ 10 feet.
Arm/DisarmRequires one 1--1/8" (28mm) straightcam mortise cylinder. Clockwise turnarms the alarm, counter-clockwiseturn disarms or silences the alarm.Low audible chirp indicates alarm hasbeen activated. (Cylinder notincluded unless specified.)
Device StatusA red LED indicator will illuminateevery 30 seconds when the alarm isarmed.
Tamper ResistantBuilt-in safety monitor sounds alarmwhen tampering occurs.
Quick CodeM61
Exit Alarm DeviceED4000 Series x M61ED5000 Series x M61 See price book for cylinderoptions.
Alarm Kit*ED 40AKED 50AKSee price book for doorwidth and cylinder options.*Cannot retrofit to existingSVR devices.
Corbin Russwin Product Guide.55
Applications/Features
Electromechanical Closers DC26900, DC469000 Series
Closer holder devices are used on fire doors that need to beheld open but must close in case of fire. Corbin Russwinhas two distinctly different models to achieve that goal.
ApplicationsDC26900This hold open device uses the DC2600 closer with anaffixed electromagnet to release the door during analarm. Free swing arm option also available. A wisechoice for patient room applications.
DC469000Using an aluminum body closer this two-piece (closer ondoor, holder on frame) offers detectored and non-detectored model. Perfect for cross-corridorinstallations.
Voltage AMP Draw
24 VAC .083
24 VDC .150
12 VAC .077
12 VDC .266
120 VAC .042
120 VDC .044
VoltageMaster UnitAMP Draw
CompanionAMP Draw
24 VDC 30 mA 80 mA
24 VAC 47 mA 80mA
120 VAC 33 mA 17mA
For more information regarding Corbin Russwin Locksets, Exit Devices, Door Controls and Key Systems, contact your
authorized Corbin Russwin Distributor or Sales Representative.
In U.S.:Corbin Russwin Architectural Hardware
1902 Airport RoadMonroe, NC 28110Phone 800-543-3658
Fax 800-447-6714www.corbin-russwin.com
In Canada:Yale-Corbin Canada Ltd.6940 Edwards Boulevard
Mississauga, ONT L5T 2W2Phone 800-461-3007
Fax 800-461-8989www.yalecorbin.on.ca
The ASSA ABLOY Group is the world’s leading manufacturer and supplier of locks and associated products, dedicated to satisfyingend-user needs for security, safety and convenience.
Corbin Russwin and Design® is a registered trademark of Corbin Russwin Inc. Quik-Install™ is a trademark of Corbin Russwin, Inc. Norton® is a registered trademark ofYale Security Inc. Powermatic® is a registered trademark of Yale Security Inc. Folger Adam® is a registerd trademark of Folger Adam Security Inc. Other products brandnames may be trademarks or a registered trademark of their respective owners and are mentioned for reference purposes only. Copyright©2001, 2002 Corbin Russwin, Inc.All rights reserved. These materials are protected under US copyright laws. All contents current at time of publication. Corbin Russwin, Inc. reserves the right to changeavailability of any item in this catalog, its design, construction, and/or its materials.
45210-MA-5.0-6/02R