cl47.88.21.28:3013/pdf/bi-metal bearings_sae 797, sae 799...cl bime alloy pro typ typ dimi bi-metal...
TRANSCRIPT
■ CL
Bime
alloy
■ Pro
■ Typ
■ Typ
■ Dim
LI Bi-metal Bea
etal bearings are
as its sliding lay
oduction proce
pes of splits
pes of oil groo
mensions & To
Basic Dimensi
mm
10~18
arings
e based on high
yer.
ess flow
ves & oil holes
olerance
ons
quality, low-car
s
O.D.
mm
0.1
rbon steel as its backing and sin
I.D.
mm
+0.043 0
ntered with lead, tin and bronze
Housing Dia
DH
+0.018 0
e alloy or rolled w
with aluminum a
Shaft Dia
dj
-0.05
and tin
18~30 0.11 +0.052 0 +0.021 0 -0.061
30~50 0.13 +0.062 0 +0.025 0 -0.075
50~80 0.155 +0.074 0 +0.030 0 -0.09
80~120 0.19 +0.087 0 +0.035 0 -0.107
120~180 0.27 +0.10 0 +0.040 0 -0.126
Basic Dimensions Wall Thickness Chamfer
φd SB f1 f2
8~18 1 0 -0.04 0.6±0.4 max 0.4
18~25 1.5 0 -0.045 0.6±0.4 0.4±0.3
25~40 2 0 -0.05 1.2±0.4 0.4±0.3
40~150 2.5 0 -0.06 1.8±0.4 0.6±0.4
■ Carbon steel based, bronze alloy materials
Chemical element
Alloy Code & Chemical Composition (%)
JF800 JF810 JF820 JF830 JF840 JF850
CuPb10Sn10 CuPb24Sn4 CuPb24Sn AlSn20Cu CuPb30 CuSn6.5P0.1
Cu balance balance balance 0.7-1.3 balance rest
Pb 9.0-11.0 19.0-27.0 19.0-27.0 17.5-22.5 26.0-33.0 -
Sn 9.0-11.0 3.0-4.5 0.2-0.6 - 0.5 6-7
Zn 0.5 0.5 0.5 - 0.5 -
P 0.1 0.1 0.1 - 0.1 0.1-0.25
Fe 0.7 0.7 0.7 ≤ 0.7 0.7 -
Ni 0.5 0.5 0.5 ≤ 0.1 0.5 -
Sb 0.2 0.2 0.2 - 0.2 -
Al - - - rest - -
Si - - - ≤ 0.7 - -
Mn - - - ≤ 0.7 - -
Ti - - - ≤ 0.2 - -
Other 0.5 0.5 0.5 ≤ 0.5 0.5 ≤ 0.5
■ Aluminum, bronze alloy materials
Chemical
element
Chemical Composition
AlSn20Cu Alsn12Si2.5Pb1.7 AlSn6Cu AlSi11Cu AlZn5Si1.5Cu1Pb1Mg
Al balance balance balance balance balance
Cu 0.7-1.3 0.4-1.3 0.7-1.3 0.7-1.3 0.8-1.2
Sn 17.5-22.5 10.0-14.0 5.5-7.0 0.2 0.2
Ni 0.1 0.1 1.3 0.1 0.2
Si
>1
/
>1
10.0-12.0 1.0-2.0
Fe 1.8-3.5 0.3 0.6
Mn 0.35 0.1 0.3
Ti 0.2 0.1 0.2 0.1 0.2
Pb / 1.0-2.5 / / 0.7-1.3
Zn / / / / 4.4-5.5
Mg / / / / 0.6
Other 0.5 0.5 0.5 0.3 0.4
3/20
■ The
Autom
wiper
Indus
office
tramw
Bim
Mai
syst
e main applica
motive: McPher
r arms, power s
strial: Aerospace
e equipment, me
ways, textile ma
metal Washers ’
in bearing, Cam
tem, Oil pump,
ations are in Au
rson struts and s
teering pumps,
e, agricultural eq
edical and scien
achinery, valves
applications for
m shaft, Crank sh
Ram pump, van
tomotive and In
shock absorber
pedal bushes, A
quipment, cons
ntific equipment
, etc.
r
haft, Distributor
ne pump and ot
ndustrial product
rs, doors, bonne
ABS equipment
truction equipm
, packaging equ
, Transmission
ther applications
ts.
ets and tailgate
t, etc.
ment, material ha
uipment, pneum
Bimeta
King pi
Transm
pump,
shaft.
s
Engine
Cam sh
engine
hinges, steering
andling equipme
matic and hydrau
al Bushings ‘ app
n, Spring eyes,
mission system,
gear pump, Wa
e Bearings ’ app
haft, Crank (ma
bearing.
g columns, clutc
ent, forming ma
ulic cylinders, pu
plications for
Trunion, Piston
Distributor, Clu
ater pump, Cam
lication for
in), Con. Rod (b
ches, gearbox s
achines-metal, p
umps and moto
n pin, Rocker ar
utch, pilot, Starte
shaft, Intermed
big end) and oth
selector fork guid
plastic and rubbe
rs, railroad and
rm, Connecting
er, Generator, O
diate shaft, Bala
her applications
des,
er,
rod,
Oil
ance
of
4/20
J
S
J
S
J
S
J
S
J
S
J
S
J
J
JF800
SAE797
J
S
S
S
F800G
SAE797
J
S
S
S
JF810
SAE799
J
S
S
S
JF820
SAE49
J
S
S
L
JF830
SAE783
J
S
S
L
JF840
SAE48
J
S
S
L
JF850
J
S
S
L
JF860
J
S
S
L
JF800 Bi-metal
Steel-lead-bronz
Steel backing wi
Self-lubricating &
JF800G Bi-meta
Steel-lead-bronz
Steel backing wi
Self-lubricating &
JF810 Bi-metal
Steel-lead-bronz
Steel backing w
Self-lubricating &
JF820 Bi-metal
Steel-lead-bronz
Steel backing wi
Low-maintenanc
JF830 Bi-metal
Steel-aluminum-
Steel backing wi
Low-maintenanc
JF840 Bi-metal
Steel-lead-bronz
Steel backing wi
Low-maintenanc
JF850 Bi-metal
Steel-lead-bronz
Steel backing wi
Low-maintenanc
JF850 Bi-metal
Steel-lead-bronz
Steel backing wi
Low-maintenanc
Bearing / CuP
ze-compound m
ith copper- coat
& Maintenance-
al Bearing / Cu
ze-compound m
ith copper- coat
& Maintenance-
Bearing / CuP
ze-compound m
with copper -coa
& Maintenance-
Bearing / CuP
ze-compound m
ith copper- coat
ce
Bearing / AlSn
-tin-bronze-com
ith tin-coating +
ce
Bearing / CuP
ze-compound m
ith copper- coat
ce
Bearing / CuS
ze-compound m
ith copper- coat
ce
Bearing / Alum
ze-compound m
ith tin - coating +
ce
b10Sn10 Alloy
material
ting + CuPb10S
-free
uPb10Sn10 Allo
material
ting + CuPb10S
-free
b24Sn4 Alloy
material
ating + CuPb24
-free
b24Sn Alloy
material
ting + CuPb24S
n20Cu Alloy
mpound material
AlSn20Cu
b30 Alloy
material
ting + CuPb30
n6.5P0.1 Alloy
material
ting + CuSn6.5
minum-Base Al
material
+ aluminum allo
y
Sn10
oy with Graphit
Sn10 + graphite
4Sn4
Sn
y
5P0.1
lloy
oy
te
6/20
7/20
8/20
9/20
10/20
11/20
12/20
13/20
5/20
● Product Code: JF800 Bimetallic Bearings, Alloy: CuPb10Sn10
● Descriptions
Material: Steel backing with copper coating + bronze alloy (CuPb10Sn10) sinter layer
Steel-lead-bronze-compound material
Self-lubricating & Maintenance-free
● Features
1. JF800 Bimetallic Bearing’s steel-bronze-compound material with indents as
reservoir for the grease.
2. JF800 Bimetallic Bearings has high load capacity, very good resistance to fatigue
strength at higher temperatures.
3. JF800 Bimetallic Bearings is applicable in rough operation conditions.
4. JF800 Bimetallic Bearings is particularly suitable for high specific loads with
oscillating motion and low frequency
5. JF800 Bimetallic Bearings is low-maintenance.
● JF800 Alloy Code & Corresponding International Code
Product Code Alloy Code Alloy Hardness Corresponding International Code
JF800 CuPb10Sn10 69-90 HB DIN-CuPb10Sn, SAE-797, JIS-LBC3, GGB-SY, GLYCO-66,
FEDERAL MOGUL-HF2, DAIDO-L10, ACL-F100
● JF800 Alloy CuPb10Sn10 Chemical Composition ( % )
Alloy Code Cu Pb Sn Zn P Fe Ni Sb other
CuPb10Sn10 rest 9~11 9~11 ≤ 0.5 ≤ 0.1 ≤ 0.7 ≤ 0.5 ≤ 0.2 ≤ 0.5
● Physical and Mechanical Properties ● Usage
Maximum Operating Temperature Tmax-greased 150 °C dry poor
Maximum Operating Temperature Tmax-oil lubricated 250 °C oil lubricated good
Minimum Operating Temperature Tmin -40 °C grease lubricated very good
Maximum Static Load Psta,max 300 N/mm2 water lubricated poor
Maximum Dynamic Load Pdyn,max 140 N/mm2 process fluid lubricated poor
Maximum Sliding Speed V-greased 2.5 N/mm2 * m/s
Maximum PV Factor-greased 2.8 N/mm2 * m/s
Coefficient of friction f-greased 0.05-0.12
Coefficient of friction f-oil lubricated 0.04-0.12
● Possible Applications
Industrial: Mechanical handling and lifting equipment, hydraulic cylinders, agricultural equipment, off highway equipment.
● Standard parts available
Cylindrical Bush Flanged Bush Thrust Washer Plate
6/20
● P
● J
Pro
● J
A
Cu
● P
Max
Max
Min
Max
Max
Max
Max
Coe
Coe
● P
In
● S
Cyli
Product Code:
F800 Alloy Cod
oduct Code
JF800
F800 Alloy Cu
Alloy Code
uPb10Sn10
Physical and M
ximum Operatin
ximum Operatin
nimum Operating
ximum Static Lo
ximum Dynamic
ximum Sliding S
ximum PV Facto
efficient of frictio
efficient of frictio
Possible Applic
ndustrial: Mecha
Standard parts
indrical Bush
JF800G Bimet
de & Correspo
Alloy Co
CuPb10S
Pb10Sn10 Che
Cu
rest
echanical Prop
ng Temperature
ng Temperature
g Temperature
oad Psta,max
c Load Pdyn,ma
Speed V-grease
or-greased
on f-greased
on f-oil lubricate
cations
anical handling
available
Flanged Bush
tallic Bearings,
● D
Ma
Ste
Sel
● F
1. J
2. J
3. J
4. J
o
5. J
onding Internat
ode
Sn10
emical Compos
Pb
9~11
perties
e Tmax-greased
e Tmax-oil lubric
Tmin
ax
ed
ed
and lifting equip
Thrust Washe
, Alloy: CuPb1
Descriptions
aterial: Steel ba
eel-lead-bronze-
lf-lubricating & M
Features
JF800G Bimeta
reservoir for the
JF800G Bimeta
fatigue strength
JF800G Bimeta
JF800G Bimeta
oscillating motio
JF800G Bimeta
tional Code
Alloy Hardn
69-90 HB
sition ( % )
Sn
9~11
cated
0
0
pment, hydraulic
er Plate
0Sn10, With gr
acking with cop
-compound mat
Maintenance-fre
llic Bearing’s ste
e grease.
llic Bearings ha
h at higher temp
llic Bearings is a
llic Bearings is
on and low frequ
llic Bearings is
ness
B
Zn
≤ 0.5
150 °C
250 °C
-40 °C
300 N/m
140 N/m
2.5 N/m
2.8 N/m
0.05-0.12
0.04-0.12
c cylinders, agri
raphite
per coating + b
terial
ee
eel-bronze-com
as high load cap
peratures.
applicable in ro
particularly suita
uency.
low-maintenanc
C
DIN-CuPb10S
FEDERA
P
≤ 0.1
mm2
mm2
mm2 * m/s
mm2 * m/s
icultural equipm
ronze alloy (Cu
mpound material
pacity, very good
ugh operation c
able for high sp
ce.
Corresponding I
Sn, SAE-797, JI
AL MOGUL-HF2
Fe
≤ 0.7 ≤
● U
dry
oil lu
grea
wate
proc
ment, off highway
Pb10Sn10) sint
l with indents as
d resistance to
conditions.
ecific loads with
nternational Co
S-LBC3, GGB-S
2, DAIDO-L10, A
Ni
≤ 0.5 ≤
Usage
ubricated
ase lubricated
er lubricated
cess fluid lubrica
y equipment.
ter layer + Grap
s
h
ode
SY, GLYCO-66
ACL-F100
Sb oth
≤ 0.2 ≤ 0
poo
goo
very g
poo
ated poo
hite
,
her
0.5
or
od
good
or
or
7/20
● Product Code: JF810 Bimetallic Bearings, Alloy: CuPb24Sn4
● Descriptions
Material: Steel backing with copper coating + bronze alloy (CuPb24Sn4) sinter layer
Steel-lead-bronze-compound material
Self-lubricating & Maintenance-free
● Features
1. JF810 Bimetallic Bearing’s plain sliding layer is for lubricated applications.
2. JF810 Bimetallic Bearings is suitable for oil and grease lubrication.
3. JF810 Bimetallic Bearing’s inner diameter can be machined by boring, reaming,
broaching or calibrating.
● JF810 Alloy Code & Corresponding International Code
Product Code Alloy Code Alloy Hardness Corresponding International Code
JF810 CuPb24Sn4 45-70 HB SAE-799, JIS-LBC6, GLYCO-68, DAIDO-L23, ACL-F250
● JF810 Alloy CuPb24Sn4 Chemical Composition ( % )
Alloy Code Cu Pb Sn Zn P Fe Ni Sb other
CuPb24Sn4 rest 21-27 3-4.5 ≤ 0.5 ≤ 0.1 ≤ 0.7 ≤ 0.5 ≤ 0.2 ≤ 0.5
● Physical and Mechanical Properties ● Usage
Maximum Operating Temperature Tmax-greased 150 °C dry poor
Maximum Operating Temperature Tmax-oil lubricated 250 °C oil lubricated good
Minimum Operating Temperature Tmin -50 °C grease lubricated good
Maximum Static Load Psta,max 250 N/mm2 water lubricated poor
Maximum Dynamic Load Pdyn,max 120 N/mm2 process fluid lubricated poor
Tensile Strength 150 N/mm2
Maximum Sliding Speed V-greased 2.5 N/mm2 * m/s
Maximum PV Factor-greased 2.8 N/mm2 * m/s
Coefficient of friction f-greased 0.05-0.12
Coefficient of friction f-oil lubricated 0.04-0.12
● Possible Applications
Industrial: Mechanical handling and lifting equipment, hydraulic cylinders, agricultural equipment, off highway equipment.
● Standard parts available
Cylindrical Bush Flanged Bush Thrust Washer Plate
8/20
● Product Code: JF820 Bimetallic Bearings, Alloy: CuPb24Sn
● Descriptions
Material: Steel backing with copper coating + bronze alloy (CuPb24Sn) sinter layer
Steel-lead-bronze-compound material
Low-maintenance
● Features
1. JF820 Bimetallic Bearing’s plain sliding layer is for lubricated applications.
2. JF820 Bimetallic Bearings is suitable for oil and grease lubrication.
3. JF820 Bimetallic Bearing’s inner diameter can be machined by boring, reaming,
broaching or calibrating.
● JF820 Alloy Code & Corresponding International Code
Product Code Alloy Code Alloy Hardness Corresponding International Code
JF820 CuPb24Sn 40-60 HB SAE-49, ACL-F780
● JF820 Alloy CuPb24Sn Chemical Composition ( % )
Product Code Cu Pb Sn Zn P Fe Ni Sb other
CuPb24Sn rest 19-27 0.6-2 ≤ 0.5 ≤ 0.1 ≤ 0.7 ≤ 0.5 ≤ 0.2 ≤ 0.
● Physical and Mechanical Properties ● Usage
Maximum Operating Temperature Tmax-greased 150 °C dry poor
Maximum Operating Temperature Tmax-oil lubricated 250 °C oil lubricated good
Minimum Operating Temperature Tmin -50 °C grease lubricated good
Maximum Static Load Psta,max 250 N/mm2 water lubricated poor
Maximum Dynamic Load Pdyn,max 120 N/mm2 process fluid lubricated poor
Tensile Strength 170 N/mm2
Maximum Sliding Speed V-greased 2.5 N/mm2 * m/s
Maximum PV Factor-greased 2.8 N/mm2 * m/s
Coefficient of friction f-greased 0.05-0.12
Coefficient of friction f-oil lubricated 0.04-0.12
● Possible Applications
Mechanical handling and lifting equipment, machine slides, hydraulic cylinders, hydraulic motors, pneumatic equipment, medical equipment,
textile machinery, agricultural equipment etc.
● Standard parts available
Cylindrical Bush Flanged Bush Thrust Washer Plate
9/20
● P
● J
Pro
● J
A
A
● P
Max
Max
Ten
Max
Max
Coe
Max
● P
Inte
● S
Cy
Product Code:
F830 Alloy Cod
oduct Code
JF830
F830 Alloy AlS
Alloy Code
AlSn20Cu
Physical and M
ximum Operatin
ximum Load Pm
nsile Strength
ximum Sliding S
ximum PV Facto
efficient of frictio
ximum Sliding S
Possible Applic
ernal combustio
Standard parts
ylindrical Bush
JF830 Bimetal
de & Correspo
Alloy Co
AlSn20C
Sn20Cu Chemic
Cu
0.7-1.3
echanical Prop
ng Temperature
max
Speed V-oil lubr
or-oil lubricated
on f-oil lubricate
Speed V-grease
cations
n engine, air pre
available
Thrust Wash
llic Bearings, A
●
M
S
Lo
●
1.
2.
3.
onding Internat
ode
Cu
cal Compositio
Pb
17.5-22.5
perties
e Tmax
ricated
ed
ed
ess machine an
her Pla
Alloy: AlSn20
Descriptions
Material: Steel
teel-aluminum-t
ow-maintenance
Features
. JF830 Bimetal
. JF830 Bimetal
. JF830 Bimetal
tional Code
Alloy Hardn
30-40 HB
on ( % )
Fe
≤ 0.7
150
150
100
200
25
6
0.08-0.17
nd refrigerator.
ate
0Cu
backing with tin
tin-bronze-comp
e
llic Bearings has
llic Bearings has
llic Bearings has
ness
B
Ni
≤ 0.1
°C
°C
N/m
N/m
m/s
N/m
7
n-coating + bron
pound material
s medium fatigu
s good corrosio
s good sliding p
C
SAE-
Al
rest ≤
mm2
mm2
s
mm2 * m/s
nze alloy ( AlSn2
ue strength and
on resistance.
properties.
Corresponding I
-783, JIS-AJL,G
Si
≤ 0.7 ≤
● Us
dry
oil lu
grea
wate
proc
20Cu ) sinter lay
load capacity.
nternational Co
GLYCO-74, ACL
Mn
≤ 0.7 ≤
sage
ubricated
ase lubricated
er lubricated
cess fluid lubrica
yer
ode
L-F820
Ti oth
0.2 ≤ 0
poor
good
good
poor
ated poor
1
her
0.5
10/20
● Product Code: JF840 Bimetallic Bearings, Alloy: CuPb30
● Descriptions
Material: Steel backing with copper coating + bronze alloy (CuPb30) sinter layer
Steel-lead-bronze-compound material
Low-maintenance
● Features
1. JF840 Bimetallic Bearings has medium fatigue strength and load capacity.
2. JF840 Bimetallic Bearings has good corrosion resistance.
3. JF840 Bimetallic Bearings has good sliding properties.
4. JF840 Bimetallic Bearing’s alloy layer can hide the impurities in working condition.
● JF840 Alloy Code & Corresponding International Code
Product Code Alloy Code Alloy Hardness Corresponding International Code
JF840 CuPb30 30-45 HB SAE-48, JIS-KJ3
● JF840 Alloy CuPb30 Chemical Composition ( % )
Alloy Code Cu Pb Sn Zn P Fe Ni Sb other
CuPb30 rest 26-33 ≤ 0.5 ≤ 0.5 ≤ 0.1 ≤ 0.7 ≤ 0.5 ≤ 0.2 ≤ 0.5
● Physical and Mechanical Properties ● Usage
Maximum Operating Temperature Tmax 280 °C dry poor
Maximum Load Pmax 120 N/mm2 oil lubricated good
Tensile Strength 200 N/mm2 grease lubricated good
Maximum Sliding Speed V-oil lubricated 15 m/s water lubricated poor
Maximum PV Factor-greased 2.5 N/mm2 * m/s process fluid
lubricated poor
Maximum PV Factor-oil lubricated 8 N/mm2 * m/s
Coefficient of friction f-oil lubricated 0.08-0.16
● Possible Applications
Main shaft of internal combustion engine and connecting rod.
● Standard parts available
Cylindrical Bush Flanged Bush Thrust Washer Plate
11/20
● Product Code: JF850 Bimetallic Bearings, Alloy: CuSn6.5P0.1
● Descriptions
Material: Steel backing with copper coating + bronze alloy (CuSn6.5P0.1) sinter layer
Steel-lead-bronze-compound material
Low-maintenance
Lead Free
● Features
1. JF850 Bimetallic Bearings has high fatigue strength and load capacity.
2. JF850 Bimetallic Bearings has good sliding properties.
3. JF850 Bimetallic Bearings is lead free.
● JF850 Alloy Code & Corresponding International Code
Product Code Alloy Code Alloy Hardness
JF850 CuSn6.5P0.1 60-90 HB
● JF850 Alloy CuSn6.5P0.1 Chemical Composition ( % )
Alloy Code Cu Sn P other
CuSn6.5P0.1 rest 6-7 0.1-0.25 ≤ 0.5
● Physical and Mechanical Properties ● Usage
Maximum Operating Temperature Tmax 200 °C dry poor
Maximum Load Pmax 150 N/mm2 oil lubricated good
Tensile Strength 185 N/mm2 grease lubricated good
Maximum Sliding Speed V-oil lubricated 5 m/s water lubricated poor
Maximum PV Factor-greased 2.8 N/mm2 * m/s process fluid lubricated poor
Maximum PV Factor-oil lubricated 10 N/mm2 * m/s
Coefficient of friction f-oil lubricated 0.06-0.16
● Possible Applications
Mechanical handling and lifting equipment, hydraulic cylinders, agricultural equipment, off highway equipment.
● Standard parts available
Cylindrical Bush Flanged Bush Thrust Washer Plate
12/20
● Product Code: JF860 Bimetallic Bearings, Aluminum-Base Alloy
● JF860 Aluminum-Base Alloy Chemical Composition
Chemical element Chemical Composition
AlSn20Cu Alsn12Si2.5Pb1.7 AlSn6Cu AlSi11Cu AlZn5Si1.5Cu1Pb1Mg
Al balance balance balance balance balance
Cu 0.7-1.3 0.4-1.3 0.7-1.3 0.7-1.3 0.8-1.2
Sn 17.5-22.5 10.0-14.0 5.5-7.0 0.2 0.2
Ni 0.1 0.1 1.3 0.1 0.2
Si
>1
/
>1
10.0-12.0 1.0-2.0
Fe 1.8-3.5 0.3 0.6
Mn 0.35 0.1 0.3
Ti 0.2 0.1 0.2 0.1 0.2
Pb / 1.0-2.5 / / 0.7-1.3
Zn / / / / 4.4-5.5
Mg / / / / 0.6
Other 0.5 0.5 0.5 0.3 0.4
● Possible Applications
Automotive:
McPherson struts and shock absorbers, doors, bonnets and tailgate hinges, steering columns, clutches, gearbox selector
fork guides, wiper arms, power steering pumps, pedal bushes, ABS equipment, etc.
Industrial:
Aerospace, agricultural equipment, construction equipment, material handling equipment, forming machines-metal, plastic and
rubber, office equipment, medical and scientific equipment, packaging equipment, pneumatic and hydraulic cylinders, pumps and
motors, railroad and tramways, textile machinery, valves, etc.
● Standard parts available
Cylindrical Bush Thrust Washer Plate
13/20
Bimetal JFC Cylindrical Bush
Product No. Φd ΦD L ΦH
mm mm mm mm
JFC 1010
10
12
10
4
JFC 1015 15
JFC 1020 20
JFC 1210
12
10
JFC 1215 15
JFC 1220 20
JFC 1225 25
JFC 1410
14 16
10
JFC 1415 15
JFC 1420 20
JFC 1425 25
JFC 1510
15 17
10
JFC 1515 15
JFC 1520 20
JFC 1525 25
JFC 1610
16 18
10
JFC 1615 15
JFC 1620 20
JFC 1625 25
JFC 1815
18 20
15
JFC 1820 20
JFC 1825 25
JFC 2010
20 23
10
JFC 2015 15
JFC 2020 20
JFC 2025 25
JFC 2030 30
JFC 2215
22 25
15
14/20
JFC 2220 20
JFC 2225 25
JFC 2230 30
6
JFC 2515
25 28
15
JFC 2520 20
JFC 2525 25
JFC 2530 30
JFC 2815
28 32
15
JFC 2820 20
JFC 2825 25
JFC 2830 30
JFC 3015
30 34
15
JFC 3020 20
JFC 3025 25
JFC 3030 30
JFC 3040 40
JFC 3220
32 36
20
JFC 3230 30
JFC 3240 40
JFC 3520
35 39
20
JFC 3530 30
JFC 3535 35
JFC 3540 40
JFC 3550 50
JFC 4020
40 44
20
8
JFC 4030 30
JFC 4040 40
JFC 4050 50
JFC 4530
45 50
30
JFC 4540 40
JFC 4545 45
JFC 4550 50
JFC 5030
50 55
30
JFC 5040 40
JFC 5050 50
JFC 5060 60
JFC 5540
55 60
40
JFC 5550 50
JFC 5560 60
JFC 6030
60 65
30
JFC 6040 40
JFC 6060 60
JFC 6530
65 70
30
JFC 6550 50
JFC 6570 70
JFC 7040
70 75
40
JFC 7050 50
JFC 7070 70
JFC 7560 75 80 60 15/20
JFC 7580 80 9.5 JFC 8060
80 85 60
JFC 80100 100
JFC 8530
85 90
30
JFC 8560 60
JFC 85100 100
JFC 9060 90 95
60
JFC 90100 100
JFC 9560 95 100
60
JFC 95100 100
JFC 10060 100 105
60
JFC 100115 115
JFC 10560 105 110
60
JFC 105115 115
JFC 11060 110 115
60
JFC 110115 115
JFC 11550 115 120
50
JFC 11570 70
JFC 12050
120 125
50
JFC 12060 60
JFC 120110 100
JFC 125100 125 130 100
JFC 13060 130 135
60
JFC 130100 100
JFC 13560 135 140
60
JFC 13580 80
JFC 14060 140 145
60
JFC 140100 100
JFC 15060
145 150
60
JFC 15080 80
JFC 150100 100
16/20
Bimetal JFF Flanged Bush
Product No. F-0.5 D +0.28 +0.20 d +0.20 +0.15 L 0 -0.04 h B
mm mm mm mm mm mm
JFF4040 60 46 40 39.5 3.5 3
JFF4035 62 47 40 35 3.5 3.5
JFF4055 68 55 45 55 3.5 5
JFF5040A 72 57 50 40 3.5 3.5
JFF5040B 70 57 50 40 3.5 3.5
JFF5050 70 57 50 50 3.5 3.5
JFF5460 92 60.6 54 60 3.5 3.3
JFF6053 83 67 60 53 3.5 3.5
JFF6060 87 67 60 60 3.5 3.5
JFF6065 77 67 60 65 3.5 3.5
JFF6060A 88 68 60 60 4 4
JFF6060B 87 68 60 60 4 4
JFF6465 102.6 70.4 63.5 65 3.5 3.5
JFF6473 103 70.8 63.8 73 3.5 3.5
JFF6553 85 72 65 53 3.5 3.5
JFF6564 87 72 65 64 3.5 3.5
JFF6575 108 72 65 75 3.5 3.5
JFF7060 93 77 70 60 3.5 3.5
JFF7090 108 80 70 90 5 5
JFF7560 100 82 75 60 3.5 3.5
JFF8060 105 87 80 68 3.5 3.5
JFF8580 127 92 85 80 3.5 3.5
JFF85103 128 92.6 85 103.5 3.5 3.8
JFF89126 138 97.5 89.2 126.5 4.2 4.2
JFF95127 144 105 95 127 5 5
17/20
Bimetal JFW Thrust Washer
Product No. Φd +0.25 0 ΦD 0 - 0.25 ST 0 - 0. 05 ΦJ±0.12 Φh +0.4 +0.1
mm mm mm mm mm
JFW10 12 24
1.5
18 1.5
JFW12 14 26 20
2 JFW14 16 30 22
JFW16 18 32 25
JFW18 20 36 28
3 JFW20 22 38 30
JFW22 24 42 33
JFW24 26 44 35
JFW25 28 48 38
4
JFW30 32 54 43
JFW35 38 62 50
JFW40 42 6.6 54
JFW45 48 74 2
61
JFW50 52 78 65
18/20
Bimetal JDP Series plate
Product No. L +5.0 0 W+2.0 0 Ss 0 -0.05
mm mm mm
JFP100125
500 125
1
JFP150125 1.5
JFP200125 2
JFP250125 2.5
19/20