56

CLAMSHELL BUCKETS WITH VERTICAL HYDRAULIC CYLINDER FOR HEAVY DUTY

≥ This extremely robust clamshell bucket with two vertical cylinders is ideal for heavy duty digging tasks in grown soil, for excavating earth and for underground constructions

≥ The two vertically positioned hydraulic cylinders are protected both by their position beside the body as well as by an additional piston rod protection

≥ Excellent digging performance due to the good plunge behaviour and the approved shell geometry

≥ Long service life is ensured through the use of 500 HB steel in the manufacture of cutting edges and the generously dimensioned bearing system

≥ Synchronised bucket movements due to the sturdy and forged compensation rods

≥ Bolt-on digging teeth are delivered with each clamshell bucket

≥ Excellent digging characteristics are the result of the high closing force of 32 kN at 260 bar operating pressure

57

ACCESSORIES TECHNICAL DRAWING

Type DescriptionPZR450GF Recommended flange rotator – load capacity 4500 kg

PZR450G-XX* Shaft rotator – load capacity 4500 kg

PZZR450SV-PK Quick change system for shaft rotators

PZZR450R-XX* Reduction link between rotator and grapple

PZZG002-AH Welded hooks (2 pcs.)

PZZG-VK Wear plates to protect the horizontal cuttingedges (2 pcs.)

PZZG-SC** Scraper

TECHNICAL SPECIFICATIONS: COMPLETE PACKAGE

TECHNICAL SPECIFICATIONS

SCOPE OF DELIVERY: Clamshell bucket with bolt-on teeth, flange rotator PZR450GF, connecting hoses BL462 and BL463, upper suspension UL045 and non-return valve

SCOPE OF DELIVERY: Clamshell bucket with bolt-on teeth and non-return valve

CLAMSHELL BUCKET

Type Volume Width B Opening max. Number of Closing force Load capacity Self weight

(litre) (mm) (mm) teeth (kN) (kg) (kg)

PZG215GV-SP 215 500 1295 5 32 3000 320

PZG255GV-SP 255 600 1295 5 32 3000 335

PZG135GV-S 135 325 1295 3 32 3000 260

PZG170GV-S 170 400 1295 3 32 3000 270

PZG215GV-S 215 500 1295 5 32 3000 285

PZG255GV-S 255 600 1295 5 32 3000 300

PZG340GV-S 340 800 1295 9 32 3000 385

* please specify Ø shaft when ordering ** please specify type of grapple

TRUCK CRANE REQUIREMENTS

Operating pressure: max. 260 barPressure limitation: 260 barPump capacity: 30 – 75 l/minTwo hydraulic functions on the crane

84

B

30

11651296

1150

780

220

30

11651296

1150

780

220

66

ACCESSORIESFOR CLAMSHELL BUCKETS

≥ The scraper is for clamshell buckets with narrow widths

≥ During opening the scraper clears the inside of the shells of sticky materials such as clay

≥ The design varies depending on the shape of the grapple

≥ The adapter enables the mounting of compression rails or the support for concrete rings for handling paving slabs, curbstones, concrete rings, etc.

≥ The adapter can only be used with a non-return valve, simultaneous usage with a scraper is not possible

≥ The central lifting device for the HPXdrive, welded eyes or welded hooks serve for lifting chains or slings

≥ The maximum capacity per eye or hook is 1000 kg

≥ The wear plates serve to protect the horizontal cutting edges

67

WEAR PLATES

ADAPTER FOR COMPRESSION RAILS

SCRAPER

CENTRAL LIFTING DEVICE, WELDED HOOKS

Type Description

PZZG-SC For HPXdrive- and clamshell buckets (please indicate the type of bucket when ordering)

PZZG-AV/AS Adapter for compression rails

PZZS072A-09 Compression rails – length 720 mm (2 pcs.)

PZZS100A-09 Compression rails – length 1000 mm (2 pcs.)

PZHP04ZA Central lifting device for HPXdrive standard

PZHP05ZA Central lifting device for HPXdrive heavy duty

PZZG002-AH Welded hooks, 2 pcs.

PZZG-VK

PZZG-AV/AS

PZZG002-AH

PZHP04ZA; PZHP05ZA

PZZG-VK 650 mm, 2 pcs. (please indicate the type of bucket when ordering)

EXTENSION FOR EXCAVATING WITH THE HPX DRIVE

PZHP450V Extension for excavating – for canal construction and civil engineering – 450 mm, 30 kg

PZHP2000V Extension for excavating – for canal construction and civil engineering – 2000 mm, 97 kg

PZHP450V

NOTE: Other lengths are available on request.

NOTE: Other widths are available on request.

PZZG-SC