classic & exotic service, inc. e-mail: parts...

Classic & Exotic Service, Inc.2032 Heide, Troy MI 48084 USAPhone: 1.248.269.9414E-mail: [email protected]: http://www.classicandexotic.com

SKU Product Name Price

Body & Sheet Metal Fasteners

CAD-0123

Cadillac 5/16-18 x 1/2 Hex NutFender bolt hex nut for V8 V12 V16 Cadillac and LaSalle. Cadillac partnumber 120376 alternative group number 25.0080. Listed in Cadillac partsbook as: Group 10.0402 Nut Qty 18 Application 341; Group 10.0610 NutOn Brace Screw Qty 4 Application 345C 355C 370C 452C ; Group10.0702 Nut Qty 16 Application 340 345A 353 355AD 370AD 452AD35-50 36-50 60 70 75 80 85 90; Group 10.0719 Nut Fender Step Screw Qty 3 Application 35-50 36-50; Group 10.0878 Nut On Moulding Screw Qty 12 Application 345BC 355BC 370BC 452BC; Group 10.1009 Nut Qty6 Application 350 355D 370D 452D 35-50 36-50 90; Group 10.1143 Nut Qty 11 Application 355D 370D 452D 36-90; Group 10.1283 Nut Qty 4 Application 350 35-50 36-70 75- 80 85. Material: Steel; Finish: Black Oxide;Thread: 5/16-18; Hex: .500; Length: .460.

$ 3.00

CAD-0124

Cadillac 5/16-24 x 1/2 Hex Nut5/16-24 Hex nut for attaching mud pan shelves on 1932 - 1936 Cadillac V8 V12 and V16. Finished in black oxide to prevent rust. Cadillac part number120368 alternative group number 25.0080. Listed in the Cadillac parts bookas:Group 10.1143 Nut Qty 24 Application 345BC 355BC 370BC 452BC36-80 85. Material;Finish:Blackoxide;Thread:5/16-24;Hex:.500;Length:.460.

$ 3.75

CAD-0125

Cadillac 5/16-18 x 7/8 Sheet Metal Hex BoltHex bolt for attaching fenders and other body panels on V8 V12 V16Cadillac and LaSalle. Used from 1927 - 1936. Finished in black oxide toprevent rust. Cadillac part number 120229 alternative group number25.0500. Listed in Cadillac parts book as: Group 10.0358 Attaching BatterySupport Screw Qty 2 Application 341 353 452A; Group 10.0401 AttachingCorner Shield Screw Qty 18 Application 341 (Note: To body and rearfender); Group 10.0461 Attaching Dust Shield Screw Qty 32 Application303 328 340 341 345ABC 353 355ABC 370ABC 452ABC (Note: To fender running board and battery box); Group 10.0602 Attaching Front FenderScrew Qty 2 Application 303 314 328 35-50 36-50 60 70 75 80 85 (Note:To body and running board 10 used for front fender to side bar beforechassis 1-25001 2 used for front end of front fender to side bar afterchassis 1-25000 on 314); Group 10.0701 Attaching Rear Fender Screw Qty 32 Application 303 328 340 345AB 355B 370AB 452B 35-50 36-50 6070 75 80 85 (Note: To body gasoline tank cover and running board); Group10.0791 Filler Plate And Bracket Screw Qty 2 Application 35-50 36-50;Group 10.1007 Attaching Valance Screw Qty 13 Application 355D 35-5036-50 (Note: 5 used on 355D); Group 10.1141 Attaching Mud Pan Shelves Qty 2 Application 303 328 340 341 345A 353 355A 370A 452A; Group10.1201 Attaching Running Board Screw Qty 13 Application 303 314 328340 341 345A 353 355A 370A 452A (Note: To hangers on side bar); Group10.1281 Extension To Running Board Screw Qty 4 Application 36-70 75 8085. Material: Steel; Thread: 5/16-18; Finish: Black oxide; OAL: 1.125; Length under head: .875; Thread length: .781; Hex: .500; Head: .250.

$ 3.00

5/1/18. Prices subject to change. /18


CAD-0126

Cadillac 5/16-18 x 1 1/8 Sheet Metal Hex BoltHex bolt for attaching fenders and other body panels on V8 V12 and V16Cadillac and LaSalle. Used from 1927 through 1936. Finished in black oxideto prevent rust. Cadillac part number 122022 alternative group number25.0500. Listed in Cadillac parts book as: Group 10.0401 Attaching CornerShield Screw Qty 14 Application 341 (Note: To body and rear fender);Group 10.0602 Attaching Front Fender Screw Qty 12 Application 303 314328 340 341 345 350 353 355 370 452 36-90 (Note: Front fender to runningboard - 15 used on 350); Group 10.0602 Attaching Front Fender Screw Qty 2 Application 36-70 75 80 85 (Note: To body); Group 10.0609 BraceTo Front Fender And Side Bar Screw Qty 4 Application 345C 355C 370C452C; Group 10.0701 Attaching Rear Fender Screw Qty 54 Application303 328 340 341 345 350 353 355 370 452 35-50 36-50 90 (Note: To body running board and gasoline tank cover); Group 10.1007 Attaching ValanceScrew Qty 9 Application 350 355D 370D 452D 36-90; Group 10.1141 Attaching Mud Pan Shelves Screw Qty 1 Application 353; Group 10.1201 Attaching Running Board Screw; Qty 30 Application 350 (Note: Tofenders); Group 10.1281 Extension To Running Board Screw Qty 4 Application 350 35-50. Material: Steel; Thread: 5/16-18; Finish: Blackoxide; OAL: 1.375; Length under head: 1.125; Thread length: .875; Hex:.500; Head: .250.

$ 3.00

CAD-0127

Cadillac 5/16-18 x 3/4 Sheet Metal Hex BoltHex bolt for attaching fenders and other body panels on Cadillac V8 V12 V16 and LaSalle. Used from 1927 - 1936. Finished in black oxide to preventrust. Cadillac part number 881857 alternative group number 25.0500.Listed in Cadillac parts book as: Group 10.0461 Screw Attaching DustShield Qty 26 Application 350 355D 370D 452D 36-90 (Note: To fenderand running board); Group 10.0602 Attaching Front Fender Screw Qty 4 Application 355D 370D 452D 36-90 (Note: To support); Group 10.0715 Screw For Step Qty 3 Application 303 328 340 345 353 355ABC 370ABC452ABC; Group 10.0791 Screw For Filler Plate And Bracket Qty 4 Application 350 355D 370D 452D 36-90; Group 10.1141 Screw ForAttaching Mud Pan Shelves Qty 11 Application 355D 370D 452D 36-90.Material: Steel; Thread: 5/16-18; Finish: Black oxide; OAL: 1.00; Lengthunder head: .750; Thread length: .656; Hex: .500; Head: .250.

$ 5.25

CAD-0128

Cadillac 5/16-24 x 7/8 Sheet Metal Hex BoltHex bolt for attaching front fenders and corner shields on 1927 - 1929Cadillac V8. Finished in black oxide to prevent rust. Cadillac part number120213 Alternative group number 25.0500. Listed in Cadillac parts book as: Group 10.0401 Screw Attaching Corner Shield Qty 4 Application 341 (Note: To frame); Group 10.0602 Screw Attaching Front Fender Qty 12 Application 314 (Note: To frame and box shields). Material: Steel; Thread:5/16-24; Finish: Black oxide; OAL: 1.125; Length under head: .875; Thread length: .781; Hex: .500; Head: .250.

$ 3.00

MAS-0015

Maserati Ghibli Push And Twist FastenerPlated steel ''push and twist'' style fastener. Used to secure the air closeoutpanel in front of the radiator on Maserati Ghibli. Material: Steel; OAL: 1.051; Head OD: .625; Length under head: .953; Shaft OD: .250; Shaft OD large: .375.

$ 31.00

MISC-0125

8-32 Trim Retaining Tee BoltTrim retaining steel tee bolt designed to slide into a hollow molding. Hasmany applications including use on Ghia bodied automobiles. Measures:13/16 long; head is 1/4 x 3/8 x 1/16 thick; 8-32 thread.

$ 11.00

P-0033 T-Nut for Attaching Body Sheet MetalSteel t-nut with 5/16-24 thread. Has 2 3/16 holes for attaching to body sheet metal. Used on Packard and other cars to hold rear fenders to the body.

$ 14.00

/18 5/1/18. Prices subject to change.


Bumper

BUMP-0003

Cromos Bumper MedallionMedallion to fit in the center of Cromos bumpers. Made of bronze andreproduced from an original medallion. Suitable for use on the front or rear bumper. Measures 2 3/4'' x 2 1/4'' and has a 7/16-20 threaded mountingstud on the back.

$ 140.75

BUMP-0006 Cromos Bumper End CapCromos bumper end cap. Used on many European custom bodied cars inthe 1930's including Hispano Suiza J12 and others.

$ 128.75

BUMP-0007 Cromos Bumper End Cap, PlainCromos bumper end cap without script. Used on many European custombodied cars in the 1930's including Hispano Suiza J12 and others.

$ 128.75

BUMP-0008

Cromos Bumper Center Rubber ShieldRubber center piece for the front and rear of Cromos bumpers. Used onmany European custom bodied cars in the 1930's including Hispano SuizaJ12 and others. Material:Urethane;Base:120mm;Height:128mm;Overallthickness:77mm;Clip length x width:120mm x 39mm;Gap width:6.5mm.

$ 412.00

Cromos_Center

Cromos Bumper CenterCromos bumper center for front or rear large bumper. This new productionpiece will fit a 3 1/4 octagon tube. For use on Delahaye, Delage, Minerva, Bugatti and others.

$ 203.00

Cromos_End

Cromos Bumper End PieceCromos bumper end piece for front or rear large bumper. This newproduction piece will fit a 3 1/4 octagon tube. For use on Delahaye, Delage, Minerva, Bugatti and others.

$ 203.00

HIS-0138-1

Hispano Suiza J12 Front Bumper Mounting Bracket Style 1Front bumper mount for use on Hispano Suiza J12. Material: Steel; Finish:Natural; Length: 5.852; Width: 6.110; Thickness: .250; Holes in end: .400; Med hole ID: .474; Large hole ID: 1.195.

$ 62.00

HIS-0138-2

Hispano Suiza J12 Front Bumper Mounting Bracket Style 2Hispano Suiza J12 front bumper mounting bracket. Material: Steel; Finish:Natural; Length: 5.274; Width: 5.87;3 Thickness: .250; Large hole ID:1.190; Other holes ID: .400.

$ 62.00

HIS-0153

Hispano Suiza Bumper Bracket BoltSteel bolt for the bumper bracket of Hispano Suiza J-12. Hispano Suiza partnumber B4597. Material: Steel; Finish: Natura;l Thread: M10 x 1.5; Thread length: 20mm; OAL: 47mm; Hex: 14mm; Head height: 6mm; Length under head: 41mm.

$ 12.50

HIS-0162

Hispano Suiza J12 Bumper Bolt M10-1.504140 Heat treated steel hex bolt with M10-1.50 thread. Suitable for use inmany European automobiles of the mid 1930's. Used specifically as abumper bolt on Hispano Suiza J-12. Material:4140 Steel, heat treat grade8;Finish:Natural;Thread:M10-1.50;Threadlength:20mm;Hex:14mm;OAL:51mm;Length under head:44mm.

$ 20.75

RR-0004

Rolls Royce Phantom I II Bumper Center SpacerCNC Machined steel front and rear bumper spacer for use on Rolls RoycePhantom I and Phantom II Brewster bodied cars. Spacer fits between backbar and face bars where the center medallion attaches.

$ 128.75

RR-0105

Rolls Royce Phantom II 1/2-16 BS Stud1/2-16 BS Stud for use on Rolls Royce Phantom II. Used for bumper toframe connections. Material: 4140 Steel, heat treat grade 5; Finish:Manganese phosphate; Thread: 1/2-16 BS; Thread lengths: .500, .500; OAL: 1.500; OD: .495.

$ 20.75



TUC-0004

Tucker Rear Bumper StencilSandblasting and painting stencil to apply the Tucker logo to the rearbumper above the license plate. Recreated from an original Tucker, thisstencil preserves the stencil marks absent from many reproductions. Thisself-adhering stencil is applied to the bumper section. Then the bumpersection is sandblasted to provide a surface paint will adhere to. The stencilis left in place and painted over. Once the paint is dry the stencil isremoved and the lettering will remain.

$ 77.25

V-0007

Voisin 6 Cylinder Bumper EndRubber molded bumper end with steel core for use on 1934-1936 Voisin 6cylinder. May also fit other years and models. Price includes a $50.00 corecharge to be refunded upon receipt of a usable core. Material: Rubber &Steel; Finish: Natural; Molded rubber: approx. 3.062 x 4.125; Steel core:1.750 x 2.000; Hole ID: .437.

$ 334.75

Cowl Vent

MB-0042 Murphy Body Cowl Vent Door Latch SpringMurphy body window flapper spring. Material: Steel; OAL: .825; OD: .190.

$ 15.50

Door

BODY-0001

Exterior Door HandleCast bronze door handle with steel shank. Used on many custom bodiedcars in the 1920's and 1930's including Duesenberg Model J and DerhamCoachwork cars. Handle and shank are threaded to screw together. Shankshould be silver brazed in place after fitting and before plating. Handle canbe supplied with shank brazed in place for an additional $15.00 charge. Foruse with bezel our part number BODY-0002. Material: Bronze handle, steelshank; Shank: 7/16-20 thread, 5/16 square x 3 7/8; Handle: 3.975 long, .935 wide, 1.950 high.

$ 128.75

BODY-0002

Exterior Door Handle BezelCast bronze door handle bezel used on many custom bodied cars in the1920's and 1930's including Duesenberg Model J and Derham Coachworkcars. Original part number 66046. For use with door handle, our partnumber BODY-0001. Length: 2.100; Width: 1.200; Height: .410; Mountingholes: 1.500, centers for #10 screws.

$ 41.25

BODY-0004

Door Handle Bezel Spring Lock WasherLaser cut spring steel lock washer for use with the door handle bezel onCord L-29 and others. Material: 1095 Spring steel; Finish: Natural; Thickness: .020; OD: .896; ID: .500.

$ 12.50

BODY-0007 Door Handle, Willoughby CoachworkDoor handle for use on Willoughby bodied cars. Sold as shown, requiresfinishing for use.

$ 77.25

BODY-0009

Door Latch Lock Set ArmDoor latch lock set arm for use on Ternstedt Manufacturing door latchesthat are locked by a lock cylinder in the door. Used on many prewarautomobiles. Material:Carbon steel;Finish:Natural;Thickness:.056;Slotlength:.482;Slot width:.196;Hole ID:.190;Approx. OAL:3.540;Approx.OAW:1.690.

$ 51.50

CAD-0140

1929-32 Cadillac Door Light SwitchChrome plated door jamb switch for use on 1929 - 1932 Cadillac. Material:Stee;l Finish: Chrome; Bracket: 1.750 x 1.125; Bracket holes, centers:.190, 1.375; Button OD: .375; Button height: .359.

$ 165.00



COR-0038

Cord 810 812 Door Hinge ScrewDoor hinge screw for use on Cord 810 and 812. Material: Steel; Finish:Black oxide; Thread: 5/16-24; Thread length: .474; OAL: .633; Slot width:.084; Slot depth: .089.

$ 6.25

MB-0003

Murphy Body Door Bumper SocketsMurphy body door bumper sockets CNC machined from solid aluminum.Two lengths available - can be shortened to fit a specific application. Bothsockets have .030 lip to overlap the door jams. Style #1 Outside width:1.355; Outside length: 1.719; Height: .488. Style #2 Outside width: 1.355; Outside length: 1.106; Height: .488.

$ 30.00

MB-0020

Murphy Body Footman LoopBronze footman loop used on many Murphy bodied cars. Used to hold doorcheck strap to door and body. Material: Bronze; Finish: Natural; Length:3.105; Width: .632; Height: .687; Stud holes: .272; Hole centers: 2.375; Bar length: 1.666.

$ 38.00

MB-0023

Murphy Coachwork Door Handle BezelMurphy coachwork door handle bezel. This screws into the door and wasused on many Murphy bodies. May also fit other pre-war car coachwork.Material: Brass; Finish: Natural; Thread: 3/4-16 x .576; OAL: .738; OD:.875 and .745; ID: .672 and .536.

$ 20.75

MISC-0022 Molded Rubber Round Door BumperMolded rubber round door bumper. Many applications on antique & classicvehicles including Delage of the 1930's. OD: 1 1/8; Height: 9/16.

$ 13.50

MB-0041-1,MB-0041-2

Murphy Body Door Latch Tongue Extension $ 0.00

MISC-0068 MISC-0069

Dovetail Door Bumper Sockets.Ideal door bumper socket. New fully machined aluminum part to replaceoriginal die cast Ternstedt Mfg. Co. part. Used with a steel capped rubberbumper, this dovetail socket has four mounting holes to hold the socket tothe car body, has four holes tapped for 8-32 screws to retain the cover plateand two pockets for bumpers. Available in two pocket sizes: 1/2'' or 5/8''. Outside dimensions: 3'' long x 1 11/32 wide x 5/8 high. Interior dimensions:1 1/8 x 9/16 deep.

$ 51.50

MISC-0274

Hooper Body Door Hinge BoltSteel door hinge bolt for use on Hooper bodied cars of the 1920's and1930's. Material: 4140 Steel; Finish: Natural; Thread: BSF 5/16-22; Thread length: .387; OAL: 1.667; Length under head: 1.425; Head OD:.768; Shaft OD: .387; Square: .305.

$ 41.25

MISC-0277

Hooper Body Door Hinge ScrewThis M7 x 1.00 door hinge screw has an oversized shank for repairing wornhinges. For use on Hooper bodied cars of the 1920's and 1930's. Material:Steel; Thread: M7 x 1.00; Thread length: 8mm; OAL: 26mm; Head OD:9mm; Head height: 5mm; Shaft: 7mm; Length under head: 21mm.

$ 5.25

MISC-0310

Door Bumper Retaining BracketLaser cut retaining bracket used to install a rubber door bumper. For use onmany classic cars of the early 1930's such as Duesenberg and others. Material: Steel; Finish: Natural; Length: 1.260; Width: .806; Height: .484; Thickness: .060; Holes: .205, .336 centers.

$ 25.75

MISC-0324

Door Window Flapper HingeSpecial hinge with 5/8'' knuckles to cover the window opening when thewindow is rolled down. Sold in a six foot length - trim to fit application. Material: Steel; Length: 6ft; Thickness: .038; Knuckle: .625; Pin DIA: .093; Open width: 3.000.

$ 128.75



Fenders

CAD-0123

Cadillac 5/16-18 x 1/2 Hex NutFender bolt hex nut for V8 V12 V16 Cadillac and LaSalle. Cadillac partnumber 120376 alternative group number 25.0080. Listed in Cadillac partsbook as: Group 10.0402 Nut Qty 18 Application 341; Group 10.0610 NutOn Brace Screw Qty 4 Application 345C 355C 370C 452C ; Group10.0702 Nut Qty 16 Application 340 345A 353 355AD 370AD 452AD35-50 36-50 60 70 75 80 85 90; Group 10.0719 Nut Fender Step Screw Qty 3 Application 35-50 36-50; Group 10.0878 Nut On Moulding Screw Qty 12 Application 345BC 355BC 370BC 452BC; Group 10.1009 Nut Qty6 Application 350 355D 370D 452D 35-50 36-50 90; Group 10.1143 Nut Qty 11 Application 355D 370D 452D 36-90; Group 10.1283 Nut Qty 4 Application 350 35-50 36-70 75- 80 85. Material: Steel; Finish: Black Oxide;Thread: 5/16-18; Hex: .500; Length: .460.

$ 3.00

CAD-0126

Cadillac 5/16-18 x 1 1/8 Sheet Metal Hex BoltHex bolt for attaching fenders and other body panels on V8 V12 and V16Cadillac and LaSalle. Used from 1927 through 1936. Finished in black oxideto prevent rust. Cadillac part number 122022 alternative group number25.0500. Listed in Cadillac parts book as: Group 10.0401 Attaching CornerShield Screw Qty 14 Application 341 (Note: To body and rear fender);Group 10.0602 Attaching Front Fender Screw Qty 12 Application 303 314328 340 341 345 350 353 355 370 452 36-90 (Note: Front fender to runningboard - 15 used on 350); Group 10.0602 Attaching Front Fender Screw Qty 2 Application 36-70 75 80 85 (Note: To body); Group 10.0609 BraceTo Front Fender And Side Bar Screw Qty 4 Application 345C 355C 370C452C; Group 10.0701 Attaching Rear Fender Screw Qty 54 Application303 328 340 341 345 350 353 355 370 452 35-50 36-50 90 (Note: To body running board and gasoline tank cover); Group 10.1007 Attaching ValanceScrew Qty 9 Application 350 355D 370D 452D 36-90; Group 10.1141 Attaching Mud Pan Shelves Screw Qty 1 Application 353; Group 10.1201 Attaching Running Board Screw; Qty 30 Application 350 (Note: Tofenders); Group 10.1281 Extension To Running Board Screw Qty 4 Application 350 35-50. Material: Steel; Thread: 5/16-18; Finish: Blackoxide; OAL: 1.375; Length under head: 1.125; Thread length: .875; Hex:.500; Head: .250.

$ 3.00

CAD-0127

Cadillac 5/16-18 x 3/4 Sheet Metal Hex BoltHex bolt for attaching fenders and other body panels on Cadillac V8 V12 V16 and LaSalle. Used from 1927 - 1936. Finished in black oxide to preventrust. Cadillac part number 881857 alternative group number 25.0500.Listed in Cadillac parts book as: Group 10.0461 Screw Attaching DustShield Qty 26 Application 350 355D 370D 452D 36-90 (Note: To fenderand running board); Group 10.0602 Attaching Front Fender Screw Qty 4 Application 355D 370D 452D 36-90 (Note: To support); Group 10.0715 Screw For Step Qty 3 Application 303 328 340 345 353 355ABC 370ABC452ABC; Group 10.0791 Screw For Filler Plate And Bracket Qty 4 Application 350 355D 370D 452D 36-90; Group 10.1141 Screw ForAttaching Mud Pan Shelves Qty 11 Application 355D 370D 452D 36-90.Material: Steel; Thread: 5/16-18; Finish: Black oxide; OAL: 1.00; Lengthunder head: .750; Thread length: .656; Hex: .500; Head: .250.

$ 5.25



CAD-0128

Cadillac 5/16-24 x 7/8 Sheet Metal Hex BoltHex bolt for attaching front fenders and corner shields on 1927 - 1929Cadillac V8. Finished in black oxide to prevent rust. Cadillac part number120213 Alternative group number 25.0500. Listed in Cadillac parts book as: Group 10.0401 Screw Attaching Corner Shield Qty 4 Application 341 (Note: To frame); Group 10.0602 Screw Attaching Front Fender Qty 12 Application 314 (Note: To frame and box shields). Material: Steel; Thread:5/16-24; Finish: Black oxide; OAL: 1.125; Length under head: .875; Thread length: .781; Hex: .500; Head: .250.

$ 3.00

P-0033 T-Nut for Attaching Body Sheet MetalSteel t-nut with 5/16-24 thread. Has 2 3/16 holes for attaching to body sheet metal. Used on Packard and other cars to hold rear fenders to the body.

$ 14.00

STZ-0014 STZ-0015

Stutz Tail Light Stanchion Fender PlateSteel support plate for the tail light stanchion on Stutz M SV-16 and DV-32.Attaches under the fender. Available in left and right side placement.Material: Steel; Finish: Natural; Length: 3.78;5 Width: 2.445; Thickness:.04;0 ID of bend: .500; Holes: .343.

$ 69.75

Gas Cap, Door

LIN-0011

1935-39 Lincoln V-12 Gas Cap AssemblyComplete new gas cap assembly for 1935-1939 Lincoln V-12. Thisassembly has a chrome plated aluminum cap with a brass lock plate.Precision CNC machined and ready for installation.

$ 360.50

LIN-0012

Gas & Radiator Cap Retaining Cup, 3 EarsGas and radiator cap retaining cup with three ears. One ear is wider thanthe others. For use with Lincoln V-12 1935 - 1939 and 1938 Packard. Mayalso fit other makes and years of vehicles. For use with our part numbers:LIN-0011, LIN-0013, LIN-0014. Material: Brass; Finish: Natura;l DIA: 1.812; Square hole: .417; Height: .390; Thickness: .062.

$ 25.75

LIN-0012-B

Gas & Radiator Cap Retaining Cup 2 EarsGas and radiator cap retaining cup with two ears. For use with Lincoln V-121935 - 1939 and 1938 Packard. May also fit other makes and years ofvehicles. For use with our part numbers: LIN-0013, LIN-0014. Material:Brass; Finish: Natura;l DIA: 1.900; Square hole: 7/16; Height: .444; Thickness: .062.

$ 25.75

LIN-0012-C

Gas & Radiator Cap Retaining Cup 3 Ears Round HoleGas and radiator cap retaining cup with three ears. One ear is wider thanthe others. This style has a round center hole instead of a square hole. Foruse with Lincoln V-12 1935 - 1939 and 1938 Packard. May also fit othermakes and years of vehicles. Material: Brass; Finish: Natural; OD: 1.800; Height: .375; ID: .383; Thickness: .060; Ears: .406 x .125.

$ 25.75

LIN-0013

Gas & Radiator Cap Backup WasherGas and radiator cap backup washer with cupped shape. For use withLincoln V-12 1935 - 1939 and 1938 Packard. May also fit other makes andyears of vehicles. For use with our part numbers: LIN-0011, LIN-0012 orLIN-0012-B, LIN-0014. Material: Brass; Finish: Natural; OD: 2.500; ID:.767; Height: .150; Thickness: .030.

$ 10.50

LIN-0014

Gas & Radiator Cap Sealing WasherGas and radiator cap sealing washer made from 1/32 gasket paper. For usewith Lincoln V-12 1935 - 1939 and 1938 Packard. May also fit othermakes and years of vehicles. For use with our part numbers: LIN-0011, LIN-0012 or LIN-0012-B, LIN-0013. Material: Gasket paper; OD: 2.500; ID: .791; Thickness: .025.

$ 3.25

MISC-0402 MISC-0403

Jaguar Mark X Gas Filler Door Mount BracketGas filler door mounting bracket for use on Jaguar Mark X. Left and rightside available. Material: Steel; OAL: 3.994; Width: 1.750; Thickness: .042.

$ 180.25



MISC-0418 Jaguar Mark IX Gas Filler Cap WasherJaguar Mark IX gas filler cap washer. Material: Steel; Finish: Natural; OD:2.425; ID: .325.

$ 36.25

Hood

AUB-0001

Auburn 851 852 Hood HingeHood hinge for Auburn 851/852 hood sides. Specially made for use onAuburn, but may also fit other makes of automobiles. Material: Steel; Pin:3/16; Knuckle: 2.00; Open width: 1 1/4; Thickness: .060; Length: 60''.

$ 51.50

CAD-0074

Cadillac 6-32 Hood Hinge Nut6-32 Nut for all 1925-1936 Cadillac V-8 V-12 and V-16 and LaSalle hoodhinges. Cadillac group number 13.0094, part number 113102. Listed inCadillac parts book as ''Top panel hinge screw nut''. Material: SS; Finish:Natural; Thread: 6-32.

$ 2.25

CAD-0075

Cadillac 10-24 Hood Bumper Nut10-24 Heavy nut for the top hood bumper on 1925-1929 V-8 Cadillac andLaSalle. Cadillac group number 13.0041, part number 120361. Listed inCadillac parts book as ''Button to top panel nut''. Material: SS; Finish:Natural; Thread: 10-24; Hex: 3/8; Height: .197.

$ 2.25

CAD-0082

Hood Door Spring 1930-1931 Cadillac & LaSalleHood door spring for 1930-1931 Cadillac and LaSalle. For use on thefollowing: 1930-1931 Cadillac: 355A V8, 370A V12, 452A V-16; 1930-1931LaSalle 345A V8. Cadillac group number 13.0316, part number 882235. One spring required for each hood door - total of 10 required per car. OAL:3 1/2; Loop OD: 1/2; Wire size: .092; ''U'' Length & width: 1 1/32 x 13/16.

$ 20.75

CAD-0092

1930-33 Cadillac Hood Rest BracketSteel hood rest bracket attaching to center hinge on 1930 - 1933 CadillacV8 V12 and V16. Cadillac part number 882679, group number 13.0216. Two used per car on models 345C 355B 370 452BC. Four used on allother models. Material: Steel; Finish: Natural; Length: 2.930; Width:2.766; Thickness: .056; Holes: .157; ID 2.00 centers.

$ 36.25

MISC-0197

Ghia Coachwork Hood Latch SpringHood latch spring used with some Ghia bodied cars from the 1950's. Thisspring was produced for installation with a Ghia Supersonic body on anAston Martin DB 2/4. Material: Stainless steel; Finish: Natural; Wire: .115; OD: 1.49; Free length: 1.475.

$ 25.75

MISC-0208

Ghia Coachwork Hood Support SpringSpiral torsion spring used as a hood support spring for cars with Ghia bodycoachwork. This spring was produced for the hood support on a GhiaSupersonic body on an Aston Martin DB 2/4. Material: Stee;l Finish:Natural; Width: .300; OD: 2 11/16; Thickness: .078; End loop ID: 11/32.

$ 87.75

MISC-0246

Diamond Pleated Hood Pad MaterialDiamond pleated hood pad material for use on Italian cars such asMaserati, Ferrari, Lamborghini and others. Consists of an insulating padsewn between two layers of vinyl coated fabric. The diamond in the materialshown is 3.437 point to point. Distance between the stitching is 2.375.Other sizes and patterns can be custom sewn in sizes up to 5ft x 4ft. Thisitem is sold by the square foot. Largest size available is 5ft x 4ft. Material:Vinyl & insulation; Thickness: 0.125; Diamond: 3.437 point to point.

$ 41.25

MISC-0271 Aluminum J MoldingAluminum ''J'' molding for use in various automotive and marineapplications. Length: 48''; Width: 1.038; Thickness: .038.

$ 36.25

P-0088

Packard Hood Rivet, ShortPackard hood rivet, short version. OAL: .246; OD: .312 - .200 - .125; Widthof head: .049; Width of .200 shank: .067; Width of .125 shank: .125; Holein .125 shank: .078.

$ 10.50



P-0089

Packard Hood Rivet, LongPackard hood rivet, long version. OAL: .300; OD: .310 - .200 - .125; Widthof head: .047; Width of .200 shank: .128; Width of .125 shank: .125; Holein .125 shank: .078.

$ 12.50

P-0097 P-0098

Hood Louver Door Spring 1938-1939 PackardRight and left side hood louver door springs for 1938-39 Packard V-12.Packard part numbers: Right: 242118R group 0.01901; Left: 242118L group 0.01901. 3 Springs per side required. Material: SS; Finish: Natural; Wire DIA: .072; OD: .395; LOB: 1.585; OAL: 7 1/4.

$ 14.25

P-0126

Hood Door Spring 1929-1931 PackardHood door spring for 1929-1931 Packard Series 300 - 800. Packard partnumber 147283 ''Bonnet Side Door Hinge Spring''. Six or eight springsrequired per car depending on model. OAL: 2 1/2 Wire size: .085; LoopOD: .357; ''U'' Length & width: 11/16 x .445.

$ 20.75

STZ-0003

Stutz Hood Vent Door KnobSteel knob for the hood vent door as used on Stutz SV-16 and DV-32. Quantity of 8 used per car. Material: Cold rolled steel; Finish: Natural; Thread: 6-32; Thread length: .290; Head: .620 OD x .505 long; Lengthunder head: .605; Step under head: .182 OD; OAL: 1.110.

$ 18.75

STZ-0006

Stutz Hood Hinge End PlateSteel hood hinge end plate for Stutz DV-32. Used to hold the hinge pin tocowl and radiator. Material: Steel; Finish: Natural; Length: 2.500 ; Width:.853; Height: .583; Holes: .312 ID, 1.776 center; Cut out: 1.080 x .140; Hood ID: .453.

$ 128.75

License Plate

MISC-0178

License Plate Frame Prewar AutomobilesChrome plated adjustable license plate frame. Used on automobiles of thelate 1930's and early 1940's. OD: 7/16; Minimum width: 8.00; Minimumheight: 4.00.

$ 77.25

MISC-0419

In-Lite Minor Sand Blast MaskIn-Lite Minor sand blast mask. Used to blast ''in-lite minor'' into primer onthe license plate bracket before painting as shown in photos. For use onStutz and other prewar cars. Text length: 1.00; Text height & width: .624.

$ 25.75

Lighting

CAD-0063 CAD-0064

Cadillac V-8 & V-16 Tail Light Conduit HangerSteel strap to support spring type wiring conduit used on 1929-1930 V-8 and1930-1931 V-16 Cadillac. May also be applicable to other years and models.Two sizes available. Cadillac group number 14.1974, part number1080556. CAD-0063 Length: 6 1/4; Width at center: .650; Width at end: 11/8; Thickness: .035; Hole DIA: .342; Holes center to center: 5.130. CAD-0064 Length: 6 1/4; Width at center: .650; Width at end: 1 1/8; Thickness: .035; Hole DIA: .342; Holes center to center: 5.130.

$ 32.50

CAD-0077

Cadillac V-8 Tail Light Conduit BracketBracket for securing tail light conduit to the frame. Fits 1929 Cadillac V-8model 353 may also fit other years and models. Cadillac part number870795, group number 11.0390 ''Conduit for rear lamp assemblies''. Material: Brass; Finish: Primer; OAL: 2.350; Width: 2.325; Height: .915; ID opening bracket: 5/8; Thickness: .040; Holes: .262.

$ 51.50

CAD-0140

1929-32 Cadillac Door Light SwitchChrome plated door jamb switch for use on 1929 - 1932 Cadillac. Material:Stee;l Finish: Chrome; Bracket: 1.750 x 1.125; Bracket holes, centers:.190, 1.375; Button OD: .375; Button height: .359.

$ 165.00



CAD-0223

1932 Cadillac Headlight Cork GasketCork gasket for use on 1932 Cadillac headlights. Each light requires 30'' ofmaterial - this is sold in a length of 61'' for use on two headlights. Cadillacgroup number 14.0352, part number 912685 ''Gasket for head lamp lens''. For Series 355BC 370BC 452BC. Material: Cork; Length: 61''; Width:.287; Thickness: .152.

$ 10.50

COR-0034

Cord 810 812 Headlight Door Adjusting ScrewHeadlight door adjusting screw for Cord 810 & 812. Made from steel andcadmium plated for corrosion resistance. Material: 12L14; Finish:Cadmium; Thread: 9/16-18; Thread length: 1.281; Length: 1.875; Hex:.562; Length under head: 1.625; Head height: .250; Bottom OD: .312.

$ 25.75

COR-0035 Cord 810 812 Tail Light Lens SpringTail light lens spring for use on Cord 810 & 812.

$ 15.50

COR-0036

Cord 810 812 Interior Trunk Light LensFrosted glass inside trunk light lens for Cord 810/812. Fits inside tail lightsmounted on trunk lid so running light can illuminate the inside of the trunk.Material: Glass; OD: 2.109; Thickness: .125.

$ 20.75

DEL-0029 Delage D8 120 Headlight MountDelage D8 120 headlight mount. Lost wax steel casting. Fits MarchalAerolux headlights. Trim and shape to fit on fender as needed.

$ 128.75

Depress_Beam Depress Beam Headlight Lens Rolls RoyceNew Depress Beam headlight lens for Rolls Royce Phantom I and othercars. Part number 10093. Lens measures 10 49/64 x 9 31/32.

$ 103.00

J-6460-14

Duesenberg J Headlamp Lens Retaining WireDuesenberg Model J headlamp lens retaining wire. Material: Spring steel; Finish: Natural; Length: 1.262; Width: .500; Height: .234; Wire: .045; Gap: .200.

$ 25.75

J-6475-17 Tail Lamp Lens ClipSteel lens retaining clip for tail lamps as used on Duesenberg Model J andothers.

$ 15.50

J-6475-27 Pyraline Lens for Tail LightsDark red tinted plastic material. Duplicate of color used in 1930's tail lamps.Sold in a standard size of 9'' x 4 1/2'' x .030 thick.

$ 31.00

J-6490-8

Duesenberg J Cowl Lamp Retaining Wire AssemblySpring steel retaining wire for the cowl lamp lens and reflector onDuesenberg Model J. Material: Spring steel; Finish: Natural; Wire: .063; OD: 5.718; Flat length: 1.390.

$ 36.25

MISC-0108

Maserati Ghibli Side Reflector / Marker LightMaserati Ghibli side marker light produced from solid brass. This sidemarker is ready to be plated and is a replacement housing for the originalplastic unit that cannot be plated.Fits some years of Maserati Ghibli mayalso fit other models. Specially produced for a Ghibli owner who wanted toreplace his deteriorated original lights with a quality replacement. Measures2 13/16 OD.

$ 113.50

P-0006

3/8-24 x 1 1/4 Radiator Shell Mount Bolt for PackardStainless steel hex bolts used to attach the headlight support brackets to theradiator shell on 1932 Super 8 and Standard 8 Packard. Fits 1000 - 1200Series cars. Ready for polishing. Packard part number 197588 ''RadiatorShell Brace to Retainer Flange Screw''. Three required per car. Material:303 SS; Thread: 3/8-24 x 1 1/4.

$ 11.00



P-0008

3/8-24 x 3/4 Radiator Shell Mount Bolt for PackardStainless steel hex bolts used to attach the headlight support brackets tothe radiator shell on on 1932 Super 8 and Standard 8 Packard. Fits Series1000 - 1200. Ready for polishing. Packard part number 197588 ''RadiatorShell Brace Retainer to Flange Screw''. Three required per car. Material:303 SS; Thread: 3/8-24 x 3/4.

$ 11.00

P-0009

3/8-24 x 15/16 Radiator Shell Mount Bolt for PackardStainless steel hex bolts used to attach the headlight support brackets tothe radiator shell on 1932 Super 8 and Standard 8 Packard. Fits Series1000 - 1200. Ready for polishing. Packard part number 197588 ''RadiatorShell Brace Retainer to Flange Screw''. Three required per car. Material:303 SS; Thread: 3/8-24 x 1/16.

$ 11.00

STW-0023-1

Stewart Warner Spotlight BaseBrass mounting base connecting to the support arm of a Stewart Warnerspotlight. The spotlight mounts to the windshield and is a combinationspotlight and rear view mirror. This is a CNC machined duplicate of theoriginal part. For use on Model A Duesenberg and possibly other cars of theera. Base: 2.750 L x .875 W x .375 H; OAH: .9375; ID: .625; Screw holes:.208, 2.25 centers.

$ 92.75

STW-0023-2

Stewart Warner Spotlight Support ArmBronze support arm for a Stewart Warner windshield mounted combinationspotlight / rear view mirror. This arm holds the light / mirror assembly andattaches to the mounting base. Recommended for use with our spotlightbase (STW-0023-1) to ensure a snug fit. For use on Model A Duesenbergand possibly other cars of the era. Material: Bronze; Width: 4.832; Height:3.9375; ID between the arms: 4.300; Mounting stem hex: .623 x .550; IDon ends: .512.

$ 386.25

STW-0023-3

Stewart Warner Spotlight Faceted NutBrass faceted nut securing the spotlight assembly to the support arm onStewart Warner windshield mounted spotlight / rear view mirrors. For use onDuesenberg Model A and possibly other cars of the era. Material: Brass; Finish: Natural; Thread: 1/4-24; Thread depth: .393; Hex: .750; Hexheight: .240; OAH: .481; Step ID: .531.

$ 51.50

STW-0023-4

Stewart Warner Spotlight LensGlass lens for Stewart Warner windshield mounted combination spotlight /rear view mirror. For use on Model A Duesenberg and possibly other cars ofthe era. OD: 3.916; Thickness: .092.

$ 128.75

STW-0023-5

Stewart Warner Spotlight TagIdentification tag for a windshield mounted combination spotlight and rearview mirror made by Stewart Warner. For use on Duesenberg Model A andothers. Length: 1.500; Width: .500; Thickness: .028; Holes: .076; ID 1.281centers.

$ 56.75

STZ-0014 STZ-0015

Stutz Tail Light Stanchion Fender PlateSteel support plate for the tail light stanchion on Stutz M SV-16 and DV-32.Attaches under the fender. Available in left and right side placement.Material: Steel; Finish: Natural; Length: 3.78;5 Width: 2.445; Thickness:.04;0 ID of bend: .500; Holes: .343.

$ 69.75

Mirror

STW-0023-6

Stewart Warner Spotlight MirrorGlass mirror for use on Stewart Warner windshield mounted combinationspotlight and rear view mirror. For use on Model A Duesenberg and possiblyother cars of the era. Material: Silvered glass; OD: 2.616; Thickness: .092.

$ 103.00



Radiator Cap & Shell

CAD-0001

1930-31 Cadillac Brass Shutter RivetSemi tubular brass shutter rivet for use with 1930-31 V-8 V-12 and V-16Cadillac. Duplicate of original stepped rivet to attach radiator shutters tolinkage. Cadillac group number 6.1382, part number 58047. Small DIA:.125 shank; Large DIA: .179 shank; Head: 5/16.

$ 4.00

CAD-0098

Cadillac & LaSalle Radiator Filler Cap WasherBrass radiator cap filler washer with cupped shape. For use on 1929-1932Cadillac V8 V12 V16 and 1932 LaSalle. May also be compatible with othervehicle makes. Cadillac part number 89157, group 6.0897. Material: Brass; Finish: Natural; OD: 2.750; ID: .750; Thickness: .030.

$ 25.75

HIS-0173

Hispano Suiza J12 Radiator Shutter RivetRadiator shutter rivet as used on Hispano Suiza J-12. Material: Brass,semi-tubular; Finish: Natural; OAL: 8.45mm; 1st Step OD: 4.15mm; 2ndStep OD: 3.65mm; Head OD: 7.5mm; Head thickness: 1.25mm; ID: 2mm.

$ 4.25

LIN-0012

Gas & Radiator Cap Retaining Cup 3 EarsGas and radiator cap retaining cup with three ears. One ear is wider thanthe others. For use with Lincoln V-12 1935 - 1939 and 1938 Packard. Mayalso fit other makes and years of vehicles. For use with our part numbers:LIN-0011, LIN-0013, LIN-0014. Material: Brass; Finish: Natura;l DIA: 1.812; Square hole: .417; Height: .390; Thickness: .062.

$ 25.75

LIN-0012-B

Gas & Radiator Cap Retaining Cup 2 EarsGas and radiator cap retaining cup with two ears. For use with Lincoln V-121935 - 1939 and 1938 Packard. May also fit other makes and years ofvehicles. For use with our part numbers: LIN-0013, LIN-0014. Material:Brass; Finish: Natura;l DIA: 1.900; Square hole: 7/16; Height: .444; Thickness: .062.

$ 25.75

LIN-0012-C

Gas & Radiator Cap Retaining Cup 3 Ears Round HoleGas and radiator cap retaining cup with three ears. One ear is wider thanthe others. This style has a round center hole instead of a square hole. Foruse with Lincoln V-12 1935 - 1939 and 1938 Packard. May also fit othermakes and years of vehicles. Material: Brass; Finish: Natural; OD: 1.800; Height: .375; ID: .383; Thickness: .060; Ears: .406 x .125.

$ 25.75

LIN-0013

Gas & Radiator Cap Backup WasherGas and radiator cap backup washer with cupped shape. For use withLincoln V-12 1935 - 1939 and 1938 Packard. May also fit other makes andyears of vehicles. For use with our part numbers: LIN-0011, LIN-0012 orLIN-0012-B, LIN-0014. Material: Brass; Finish: Natural; OD: 2.500; ID:.767; Height: .150; Thickness: .030.

$ 10.50

LIN-0014

Gas & Radiator Cap Sealing WasherGas and radiator cap sealing washer made from 1/32 gasket paper. For usewith Lincoln V-12 1935 - 1939 and 1938 Packard. May also fit othermakes and years of vehicles. For use with our part numbers: LIN-0011, LIN-0012 or LIN-0012-B, LIN-0013. Material: Gasket paper; OD: 2.500; ID: .791; Thickness: .025.

$ 3.25

MISC-0328

Brass Flat Head Rivet .350 x .380Special brass stepped flat head radiator shutter rivet. Compare size to yourrivets for suitability. Material: Brass; OAL: .380; Head OD: .350 x .082 L; Mid OD: .197 x .068 L; Bottom OD: .142 x .200 L.

$ 3.25

P-0006

3/8-24 x 1 1/4 Radiator Shell Mount Bolt for PackardStainless steel hex bolts used to attach the headlight support brackets to theradiator shell on 1932 Super 8 and Standard 8 Packard. Fits 1000 - 1200Series cars. Ready for polishing. Packard part number 197588 ''RadiatorShell Brace to Retainer Flange Screw''. Three required per car. Material:303 SS; Thread: 3/8-24 x 1 1/4.

$ 11.00



P-0008

3/8-24 x 3/4 Radiator Shell Mount Bolt for PackardStainless steel hex bolts used to attach the headlight support brackets tothe radiator shell on on 1932 Super 8 and Standard 8 Packard. Fits Series1000 - 1200. Ready for polishing. Packard part number 197588 ''RadiatorShell Brace Retainer to Flange Screw''. Three required per car. Material:303 SS; Thread: 3/8-24 x 3/4.

$ 11.00

P-0009

3/8-24 x 15/16 Radiator Shell Mount Bolt for PackardStainless steel hex bolts used to attach the headlight support brackets tothe radiator shell on 1932 Super 8 and Standard 8 Packard. Fits Series1000 - 1200. Ready for polishing. Packard part number 197588 ''RadiatorShell Brace Retainer to Flange Screw''. Three required per car. Material:303 SS; Thread: 3/8-24 x 1/16

$ 11.00

P-0034

Packard Radiator Shutter RivetStepped brass rivet used on thermostatically controlled radiator shutters.For use with all Packard Series from the 1920's through the 1940's usingshutterstats. Also for use on other makes of the era. Material: Brass; Head:.320; Medium DIA: .207 x .142 high; Small DIA: .160 x .120 high; OAL:.312; ID: .120.

$ 3.75

P-0167

1934-37 Packard Radiator Cap Retaining WasherThree eared brass radiator cap lock plate used on Packards from 1934 -1937. Packard part number 194829. Material: Brass; Finish: Natural; OD:1.770; Height: .359; ID: .375; Wall: .067; Tab: .424 x .125.

$ 51.50

TAG-0037

Maserati Radiator Cap TagRed and silver radiator cap tag for Maserati 3500 and other early 6 cylindermodels. Material: Aluminum; Finish: Natural; OD: 2.105; Thickness: .018; Hole ID: .100; Hole centers: 2.250; Width: 2.531.

$ 46.50

Running Board

J-7328

Duesenberg Brass Running Board ChannelBrass J-shape channel used to finish the inside edge of Duesenbergrunning boards. Can also be used as binding molding for a variety of vintagecars and boats. Measures 72'' long x 1.093 high x .032 thick.

$ 92.75

MAR-0020 Marmon V16 Running Board MoldingProduced and sold on a per piece basis. Material: Brass; Length: 61.5'';Width: .812.

$ 231.75

MAR-0021 Marmon V16 Running Board Edge Molding SetMarmon V-16 running board edge molding set. Set of 8 brass moldings.

$ 1416.25

MISC-0370

5/16-18 Black Oxide BoltAmerican Underslung running board bolt. Duplicate of an original part froma 1910 Traveller. Material: Steel; Finish: Black oxide; Thread: 5/16-18; Thread length: .803; OAL: 1.324; Hex: 1/2''; Dome: .052; Head height:.312; Length under head: .189.

$ 5.25

Sill Plates

AUB-0005

Auburn Boattail Speedster Sill PlateAluminum sill plate for use on Auburn Boattail Speedster. Sill plate has anetched-in design and is an exact duplicate of an original sill plate.Material:Aluminum; Finish: Natural; Length: 32.00; Width: 3.062; Thickness:.052; Inner bend DIA: .557; Width before bend: 2.00; Width after bend:.312.

$ 154.50

MAS-0002

Maserati Ghibli Sill PlateUniversal aluminum sill plate for Maserati Ghibli. Fits left and right side ofthe car, but will need to be polished and trimmed to fit before installation. Maserati part number 115B064950. Material: Aluminum; Finish: Natural; Width: 1.727; Length: 36.00; Thickness: .050.

$ 130.00



MB-0010

Murphy Body Co. Door Sill PlatesDoor sill plate to fit all Murphy bodied cars of the 1920's and 1930's. Thesesill plates are an exact duplicate of the original shape, are made from .040thick brass and measure 39'' x 2 1/2''. The Murphy logo is stamped into thebrass in the center of the plate. These sill plates are produced to betrimmed to fit and drilled by the purchaser. They will also need to bepolished and plated by the purchaser. These plates will fit all Murphybodied cars.

$ 133.00

P-0072

1935 Packard V-12 Front Sill PlatesNew photo engraved sill plates to fit many Series and models of PackardV-12. These perfect reproduction sill plates have been photo-etched into.032 brass and are exact duplicates of the original Packard parts. Theplates are ready to be drilled and plated. Left and right side available. Sillplates are 2.562 x 34.935. and will fit 1935 V-12 Convertible Sedan. Original Packard part numbers: 224317 (right) and 224318 (left).

$ 92.75

P-0073

1935 Packard V-12 Rear Sill PlatesNew photo engraved rear sill plates to fit many Series and models ofPackard V-12. These perfect reproduction sill plates have been photo-etched into .032 brass and are exact duplicates of the original Packard parts. The plates are ready to be drilled and plated. Right and leftside available. Sill plates are 1.375 x 17.187. Original Packard partnumbers: 224307 (right) and 224308 (left).

$ 77.25

STZ-0016

Stutz Door Sill Plate LongBrass engraved door sill plate for use on 1931 Stutz Model M. This is thelonger of the two sill plates we stock. Material: Brass; Length: 36.0; Width:2.516; Thickness: .042; Height: .553; ID Bend: .218.

$ 144.25

STZ-0017

Stutz Door Sill Plate ShortBrass engraved door sill plate for use on 1931 Stutz Model M. This is theshorter of the two sill plates we stock. Material: Brass; Length: 18.00; Width: 2.482; Thickness: .042; Height: .617; ID Bend: .218.

$ 144.25

STZ-0041

1929 1930 Stutz Model M Door Sill PlateBrass blank for fabricating 1929 - 1930 Stutz Model M door sill plate. Highlypolished brass stock with "STUTZ" engraved in proper location. Pleasenote: any appearance of scratches to the finish in photo is due to protectiveplastic covering to be removed after purchase - sill plate is not scratched.This sill plate must be custom fit to the car: trimming, forming and chromeplating is required for use. Material: HIghly polished brass; OAL: 24.500; Width: 3.00; Thickness: .0035.

$ 144.25

Top

COR-0037-B Cord 810 812 Top Rivet ShortCord 810/812 top rivet with step. Material: Stainless steel; Finish: Natural; OAL: .890; OD: .263 - .311; Length under head: .783.

$ 15.50

MB-0024

Murphy Body Rear Top Bow Retaining StudRear top bow retaining stud for use on Murphy bodied cars. May also becompatible with other body makes. Material: 12L14 Steel; Finish: Natural; Thread: 5/16-18 x .557; OAL: 1.190; Width of flats: .500; OD: .626; HeadOD: .375; Domed head thickness: .135.

$ 20.75

MB-0025

Murphy Body Disappearing Top Roadster Lid HandleMurphy disappearing top roadster lid handle. Material: Bronze with steelinsert; Finish: Natural; Thread: 5/16-18 x .100; Handle length: 5.00; Length of post: 3 1/4; Square shaft: 5/16.

$ 206.00



MB-0032

Murphy Body Rear Window to Frame Thumb ScrewRear window to frame knurled thumb screw for use on Murphy bodied cars.Material: Steel; Finish: Natural; Thread: 1/4-18 x .627; Kruled DIA: .900; Slot width: .069; Head height: .800; Knurled height; .355; Head length:.390.

$ 72.25

MB-0033

Murphy Body Windshield to Front Top Bow Mounting PinWindshield to front top bow mounting pin for use on Murphy bodied cars.Material: Steel; Finish: Natural; Thread: 5/16-24 x .660; OAL: 1.250; Headlength: .590; Head DIA: .480; Slot width: .072.

$ 41.25

MB-0034

Murphy Body Convertible Top Corner Thumb NutConvertible top corner knurled thumb nut for use on Murphy bodied cars.Material: Steel; Finish: Natural; Thread: 1/4-18; OAL: .805; Knurled DIA:.900; Base DIA: .625; Slot width: .067; Slot length: .810.

$ 87.75

Trunk

CAD-0005

Cadillac V-16 Trunk Rack Cup WasherCadmium steel cup washer to fit inside the trunk rack where bosses for themoldings come through the rack. For use on 1930-31 Cadillac V-16models 36-75 and 85. Cadillac part number, 1416010 group number3.1190. OD: 1/2; ID: 3/16; Height: 1/8.

$ 2.75

COR-0002

Cord Molded Rubber Lid BumpersNew molded rubber lid bumpers with hole in the center for the attachingscrew. Used on Cord Convertible Coupe. Sold as a set of four. Measure15/16 Dia. and 9/16 H.

$ 16.50

COR-0024 Cord 810 812 Lid Stay Flipper LeftTrunk lid stay flipper for the left hand side of the trunk on all Cord 810 and812 models.

$ 123.75

COR-0036

Cord 810 812 Interior Trunk Light LensFrosted glass inside trunk light lens for Cord 810/812. Fits inside tail lightsmounted on trunk lid so running light can illuminate the inside of the trunk.Material: Glass; OD: 2.109; Thickness: .125.

$ 20.75

MB-0025

Murphy Body Disappearing Top Roadster Lid HandleMurphy disappearing top roadster lid handle. Material: Bronze with steelinsert; Finish: Natural; Thread: 5/16-18 x .100; Handle length: 5.00; Length of post: 3 1/4; Square shaft: 5/16.

$ 206.00

MISC-0407

Trunk Trim Tee Bolt, SmallTrunk trim tee bolt for use on many makes on prewar automobiles. Material: Bronze; Finish: Natural; Thread: 12-24 x .300; Length underhead: .450; Tip to tip: .970; Thickest part of tee: .315.

$ 25.75

MISC-0408

Packard Eight Trunk Trim Tee Bolt LargeTee bolt for use on Packard Eight trunk rack trim strip. Packard partnumber 163613 for Series 626 633 640 and 645. Packard part number144793 for Series 346 343 and 443. Material: Bronze; Finish: Chromeplated; Thread: 1/4-28 x .465; Length under head: .610; Tip to tipmeasurement: 1.080; Thickest part of tee: .400.

$ 39.00

P-0091

1938 Packard V-12 Trunk MedallionAccessory trunk rack lid medallion for use on 1938 Packard V-12 may alsofit other years. Manufactured in bronze to exacting original specifications. Packard part number 235961. Measures: approx. 5 1/2'' high x 6 3/4''wide, 1/4'' center hole.

$ 180.25

Windshield & Windows

BODY-0011

Locking Windshield HandleLocking windshield handle for use on many pre-war custom coachworkcars. Material: Bronze; Finish: Natural; OAL: 5 1/4; Mounting pin hole:.120.

$ 128.75



BODY-0011-A

Locking Windshield Handle BezelLocking windshield handle bezel for use on many prewar custom coachworkcars. Material: Bronze; Finish: Natura;l Countersunk screw holes: .200; Slot width: .540; Slot length: 1.485.

$ 77.25

COR-0033

Cord 810 812 Windshield Bolt PlateCNC Machined cadmium plated steel windshield bolt plate for use on Cord810 & 812. This part is used underneath the cowl to align the bolt headto the sheet metal. Cord part number G 6911. Material: Steel; Finish:Cadmium; Length: 1.078; Width: .656; Height: .468; ID: .375.

$ 12.50

COR-0039 Cord 810 812 Door Glass Frame Stainless Corner TrimCord 810 and 812 door glass frame stainless corner trim. For use onPhaeton and Convertible Coupe models. Quantity of four used per car.

$ 42.25

MAS-0011

Maserati Securit Glass Etch MaskSecurit glass etching mask known to be correct for use on 1971 MaseratiGhibli. May also be appropriate for other European vehicles. Mask is foruse with hydrofluoric acid paste to etch the Securit logo on window glass.Made from mylar and has an adhesive on one side.

$ 9.00

MB-0001

Window Flapper Spring Style 1Stainless steel spring for closing window flappers. Commonly used onMurphy bodies, this style has clock wise wind & long ends coming off on thesame side. Also used by Brunn, Rollston, LeBaron and others. Measures1.260 with a .218 OD wire. Wire thickness is .040. Ends can be trimmedand bent if needed.

$ 8.75

MB-0002

Window Flapper Spring Style 2Stainless steel spring for closing window flappers. Commonly used onMurphy bodies this style has counter clockwise wind with long endscoming off on opposite sides. Also used by Brunn, Rollston, LeBaron andothers. Measures 1.130 OAL with a .218 OD wire. Wire thickness is .040. Ends can be trimmed and bent if needed.

$ 8.75

MB-0004

Window Flapper Spring Style 3Stainless steel spring for closing window flappers. Commonly used onMurphy bodies, this style has clockwise wind with long ends coming off onopposite sides. Also used by Brunn, Rollston, LeBaron and others. Measures .935 OAL with a .169 OD wire. Wire thickness is .034. Ends canbe trimmed and bent if needed.

$ 8.75

MB-0005

Window Flapper Spring Style 4Stainless steel spring for closing window flappers. Commonly used onMurphy bodies, also used by Brunn, Rollston, LeBaron and others. Measures .584 OAL with a .224 OD wire. Wire thickness is .040. Ends canbe trimmed and bent if needed.

$ 8.75

MB-0033

Murphy Body Windshield to Front Top Bow Mounting PinWindshield to front top bow mounting pin for use on Murphy bodied cars.Material: Steel; Finish: Natural; Thread: 5/16-24 x .660; OAL: 1.250; Headlength: .590; Head DIA: .480; Slot width: .072.

$ 41.25

MB-0036

Murphy Body Lower Window ChannelLower window channel for use on Murphy bodied cars. Material: Carbonsteel; Finish: Natural; Length: 31.000; Channel width: .330; Height: 1.000; Thickness: .056.

$ 123.75

MISC-0057

HI-Test LOF Safety Plate Etch MaskHI-Test LOF Safety Plate glass etching mask for use with hydrofluoric acidpaste to etch the HI-Test logo on window glass. Made from mylar and hasan adhesive on one side. For use on 1940 Cadillac and others.

$ 16.50

MISC-0060

Saint Christophe Securite Glass Etch MaskSaint Christophe Securite glass etching mask for use with hydrofluoric acidpaste to etch the Saint Christophe logo on window glass. Made from mylarand has an adhesive on one side.

$ 16.50



MISC-0062 Geneve Securit Etching Mask - LargeGeneve Securit glass etch mask. Approximate DIA: 1.525.

$ 16.50

MISC-0062-1 Geneve Securit Etching Mask SmallGeneve Securit glass etch mask. Approximate DIA: .768.

$ 10.50

MISC-0065

Duplate Safety Plate Glass Etch MaskDuplate Safety Plate glass etching mask for use with hydrofluoric acid pasteto etch the Duplate logo on window glass. Made from mylar and has anadhesive on one side.

$ 17.75

MISC-0100 Seristal Securite Glass Etch MaskSeristal glass etching mask for use with hydrofluoric acid paste to etch thelogo on window glass. Made from mylar and has an adhesive on one side.

$ 16.50

MISC-0101

Glace Securit Glass Etching MaskGlace Securit glass etching mask for use with hydrofluoric acid paste toetch the Securit logo on window glass. Made from mylar and has anadhesive on one side.

$ 16.50

MISC-0334

Vacuum Wiper Tubing ClipBrass clip used to secure 3/16 vacuum wiper tubing to windshield posts andframes. Material: Brass; Length: .562; Width: .375; Thickness: .015; IDhole: .187; ID for tube: .210.

$ 15.50

MISC-0379

1/4-27 Brass Domed Head Slotted Machine ScrewBrass domed head slotted machine screw used with American Underslungwindshields. Specifically used with Cox Clear Vision Duplex windshieldsmanufactured by Cox Brass Manufacturing Company. Reproduced from anoriginal part on a 1910 Traveller. Material: Brass; Finish: Natural; Thread:1/4-27; Thread length: .500; OAL: 1.500; Length under head: .850; HeadOD: .346; Slot width: .050; Slot depth: .100.

$ 10.50

MISC-0405

Securite Glass Etch MaskSecurite glass etching mask for use with hydrofluoric acid paste to etch theSecurite logo on window glass. Made from mylar and has an adhesive onone side. Text length: .750; Text height: .125.

$ 15.50

P-0143

1932-33 Packard Windshield Locking Mechanism LinkLinkage for the windshield locking mechanism on 1932 and 1933 Packard.Used in adjusting the angle of the windshield and securing it in place. Foruse on: 1932 Standard 8509 523 527; 1932 Deluxe 8 519 533 537; 1932 12 578 579 583 587; 1933 Standard 8 618 619 623 627 ; 1933Super 8 658 659 663 667. Packard part numbers 194987 and 194988.Material: Spring steel; Finish: Natural; Length: 6.975; Width: .675; Thickness: .042; Hole ID: .110.

$ 51.50

P-0200 P-0201

1934-39 Packard Vent Window Regulator GearWindow vent regulator gear for use on 1934 - 1939 Packard Eight Super 8and Twelve. Right and left side available. Difference between left and rightis in the orientation of the teeth. Material: Phosphor bronze; OD: 1.375; ID:.500; Thickness: .468.

$ 128.75


Terms and Conditions

Delivery

Returns

We ship worldwide Monday through Friday. Our normal handling time is 24 hours or less - manyorders ship the same day they are placed. Some items may require an additional handling time -see individual product descriptions for information. Expedited domestic shipping is through UPS. For expedited UPS shipping, orders must be receivedby 1PM EST. Orders received after 1PM EST will ship the next business day. UPS business daysare Monday - Friday. Next Day Air orders placed on Friday will be delivered on Monday. In some instances, non-expedited domestic orders may be shipped by USPS Priority Mail at ourdiscretion. If your order must be shipped by UPS Ground, please note that when placing yourorder. International shipping is through USPS Express Mail or UPS Worldwide services. We do not ship by Fedex - that includes domestic and international orders. Shipping cost is determined by package weight and shipment destination. Shipping cost for yourorder can be viewed in your shopping cart by entering a shipment destination. Please note that our warehouse is closed to the public and we are unable to accommodate localpickups of orders.

Items must be returned in new unused condition within 14 days of receipt. Items returned after 14days of receipt are subject to a 15% restocking fee. No returns will be accepted after 90 days fromthe original purchase date. Original shipping charges are non-refundable. Refunds will be issuedupon receipt and inspection of the returned item and will be issued in the manner payment wasreceived. For returns made after 60 days, refunds will be issued by check only. Items which are cut to order and sold by the foot and items made to customer specified lengths orwidths are not returnable. When returning an item, please include a copy of your original invoice and send the item to: Classic & Exotic Service, Inc.Attn: Returns2032 Heide (USPS only)2000 Heide (UPS, FedEx only)Troy, MI 48084 USA All returns must be mailed - we cannot accommodate in-person returns.

classic & exotic service, inc. e-mail: parts...

Documents