clc blocks machine
TRANSCRIPT
NANO FOAM TECHNOLOGY PRIVATE LIMITEDMFG. OF FOAM CONCRETE PLANT & EQUIPMENTADMIN & SALES OFF: 10/23, CHRISTIAN STREET,
K.G. CHAVADY, COIMBATORE – 641 008,TAMIL NADU, INDIA
MOBILE: 9944685411EMAIL: [email protected]
www.nanopuretechnology.com
TO,
Dear
We are enclosing our initial proposal on a manual plant as well as an Automatic plant for the manufacture of CLC Light Weight Blocks Machine. These plants have been set up by us all over India and overseas.
Nano Foam Technology Private Limited has worked with leading Construction manufacturers all over the world. We employ highly experienced technologists who have hands on plant experience for manufacturing Cellular Light Weight Concrete (CLC) Blocks Machine based on International Standards. Our dedicated team of engineers works closely with our customers to ensure that the entire process of setting up the plant is made simple. We offer complete plants along with the know how to Manufacture CLC Machine. Apart from training we also provide technical and commercial support for a period of 12 months from date of commissioning the plant.
Kindly go through our proposal and let me know if you would be interested in taking this to the next level of discussion.
With best regards, we remain.
For Nano Foam Technology Private Limited
Mrs. Reshma
Page 1 of 6
NANO FOAM TECHNOLOGY PRIVATE LIMITEDMFG. OF FOAM CONCRETE PLANT & EQUIPMENTADMIN & SALES OFF: 10/23, CHRISTIAN STREET,
K.G. CHAVADY, COIMBATORE – 641 008,TAMIL NADU, INDIA
MOBILE: 9944685411EMAIL: [email protected]
www.nanopuretechnology.com
1. MIXER: Specially designed mixer suitable for mixing CLC block slurry in short intervals to ensure efficient impregnation and distribution of foam along the mix. Blocks produced on Nano Foam Technology Private Limited mixers meets
CONSTRUCTION: The mixer is manufactured from Carbon Steel and fitted with wear resistant mixing tools which are of replaceable design. The shafts are installed in bearing housings provided with heavy duty roller bearings complete with seals, bearing cups and gland packings. The mixer is mounted on a platform which has a bottom clearance of 1mtr from floor level.
2. FOAM GENERATOR: Patented design foam generator an In built control panel for operation. The unit is complete with solenoid valves, timer and hoses.
WORKING PRINCIPAL: Our foam processor has a timer fitted. Once the button is pressed for the foam, the solenoid valves for air and emulsion (foaming agent and water) open up, producing foam during the period set on the timer.
3. AIR COMPRESSOR : Air compressor with a tank capacity of 180 Lts runs on 3 phase power will be connected to the
FINISH: All steel parts are surface treated and coated with zinc rich primer and 2 coats of paint. All machine and rotating parts are well oiled and lubricated and coated with antirust coating where applicable.
DELIVERY: 1 months from date of receiving confirmed order with 40% advance.
Page 2 of 6
NANO FOAM TECHNOLOGY PRIVATE LIMITEDMFG. OF FOAM CONCRETE PLANT & EQUIPMENTADMIN & SALES OFF: 10/23, CHRISTIAN STREET,
K.G. CHAVADY, COIMBATORE – 641 008,TAMIL NADU, INDIA
MOBILE: 9944685411EMAIL: [email protected]
www.nanopuretechnology.com
SL.NO PRODUTS SPECIFICATIONS PICTUREQTY RATE PER TOTAL
AMOUNT
1. CLC mixer 0.5
Capacity:0.5 m3
Power: 7.5 HP
Make: Crompton or Havells reversed forward motion for blades made of hard blades
01 1,70,000.00 1,70,000.00
2 Foam Generator
1 HP motor Capacity: 600 litres
foam output per minute
01 65,000.00 65,000.00
3 PLC Control panel
Fully automatic power supply with digital weighing meter
01 1,20,000.00 1,20,000.00
4 Air Compresso
r
3 HP 250 litre tank capacity 3 phase power supply
01 50,000.00 50,000.00
Page 3 of 6
5 Belt Conveyor
600mm wide, Rubber belt 9 mm thick3 ply, 3.00 hp Crompton or havels
make motor with gear box and drive unit Frame made of
100 * 50 Ms Channel Rollers
made of 90 mm Ms ipe heavy duty with both end bearings. Bottom Hoper with
screening Jali
01 1,65,000.00 1,65,000.00
6 Screw conveyor
3 hp motor, 3 phase power supply
01 1,45,000.00 1,45,000.00
7 Foaming agent
Synthetic base 01 7,500.00 7,500.00
8 Load cell with digital
display
5 ton capacity 01 55,000.00 55,000.00
9 Trolley Which is used to carry blocks from place to place
01 25,000.00 25,000.00
10 Trolley Which is used to carry foam concrete from mixer machine to mould
01 22,000.00 22,000.00
TOTAL 8,24,500.00
Page 4 of 6
OPTIONALS ON REQUEST
Clc mouldS.NO PRODUCT SPECIFICATIONS RATE
PER
1 600*200*200 We can make 10 blocks in one mould
12,550
2 600*200*150 We can make 10 blocks in one mould
11,550
3 600*200*100 We can make 10 blocks in one mould
10,500
MOULDS: Master moulds suitable for producing blocks of STD deigns of 600x200x100 or 600x200x150 or 600x200x200
RUNNING PLANT VISIT :
We will arrange a visit to a running plant in one of our client Factories at Chennai.
Rs.10,000 / Person / Visit
NANO FOAM TECHNOLOGY PRIVATE LIMITEDMFG. OF FOAM CONCRETE PLANT & EQUIPMENTADMIN & SALES OFF: 10/23, CHRISTIAN STREET,
K.G. CHAVADY, COIMBATORE – 641 008,TAMIL NADU, INDIA
MOBILE: 9944685411EMAIL: [email protected]
www.nanopuretechnology.comON SITE TRAINING :
We will arrange a on site training to a running plant in one of our client Factories at Hyderabad / Chennai.
Rs.20,000 / Person / Day (without Food / Stay Expenses) (Pickup / Drop from city will be arranged)
PAYMENT:
Page 5 of 6
40% ADVANCE AND BALANCE AGAINST PROFORMA INVOICE.
TAXES:
VAT AS APPLICABLE AT ACTUALS
14.5% For sale within Tamil nadu
2% Against C- Form ( 12.5% to be deposited as security deposit and will be released after submission of C Form )
VALIDITY OF OFFER:
30 DAYS.
ERRECTION/COMMISIONING:
ERRECTION / COMMISIONING WILL BE FREE. ALL TRAVEL, LODGING, BOARDING AND OUT OF POCKET EXPENSES IN CLIENTS SCOPE.
WARANTY:
12 MONTHS FORM DATE OF DISPATCH AGAINST MANUFACTURING DEFECTS
SPARE PARTS:
AVAILABLE ON REQUEST.
FREIGHT/FORWARDING:
ON DOOR DELIVERY BASIS AT CLIENTS COST
FOR NANO FOAM TECHNOLOGY PRIVATE LTD
Mrs. Diana
Page 6 of 6