cleaner coal better wear improved safety higher ...miningpeople.org/articles/logan/files/logan...
TRANSCRIPT
50 Coal People Magazine www.coalpeople.com
Logan Corporation: Serving Coal Since 1904Cleaner Coal Better Wear Improved Safety Higher Productivity Lower Maintenance Costs
Logan Corporation manufactures lips, liners, moldboards and other custom fabrica-tions. Their capabilities include attachment of all GET, full bucket rebuilds and are bet-ter than OEM Non-Complex® Parts.
988 EverSharp™ Coal Loader Lip
Safety: The ESCO EverSharp Lip System requires no hammers for installation or re-moval - simply pry the one-piece pin in or out. All components have dedicated lifting eyes for safer, convenient installation.
Quick & Simple Change-Out: The simplicity of the ESCO EverSharp Lip System’s one-piece, hammerless pin allows maintenance personnel to replace all the components during other scheduled maintenance, thereby minimizing downtime. Using an off-the-shelf pry bar, pins are removed from the top side of the lip in a matter of seconds with a simple prying motion.
Reliability: The ESCO EverSharp Lip System’s heavy-duty cast corners absorb high stresses to provide structural integrity to the bucket. Weld-on bases provide a reliable bearing surface for the shroud and pin, eliminating the need to rebuild fit areas.
ESCO EverSharp™ Lip
Low Maintenance Lip: The ESCO EverSharp Lip System features a true continuous edge design that protects the plate lip, eliminating the need to rebuild the lip during multiple bucket rebuild cycles. The bases contain fully stabilized bearing areas for the shrouds, transferring load pressures from the plate lip and onto the hardened cast base.
Productivity: The ESCO EverSharp Lip System’s slim profile shrouds allow the lip system to penetrate easily in any loading operation, reducing tire wear and fuel costs. The low maintenance, quick change system reduces costly downtime during shroud change-out and maximizes machine availability.
Efficient Wear Metal: The locking system of the ESCO EverSharp is positioned to allow elimination of the top leg, in a low wear area, and extra metal is added across the lower leg, in the high wear zone). Secondary corner wear shrouds are available to maintain the continuous edge profile when the primary corner shrouds wear out.
Logan Lips – 992 G Lip with ESCO sV2 Hammerless GET
When Logan Corporation takes on the responsibility of manufacturing a lip, whether it is a coal loader or a rock loader, they take all of the important factors
very seriously: Impact, Abrasion, Wear, Ease of use, Availability, GET, Application, Environment, and Op-erator to name a few. Logan Lips are manufactured under the careful scru-tiny of quality assurance measures. All pre-heating, post heating, welding standards, materials and shop environment guidelines are adhered to.
Locations:20 McJunkin Road, Nitro WV304.759.4800 212 North Ohio Ave., Clarksburg WV304.623.5670
KY Rt. 321 N., Prestonsburg KY606.886.8123 Rt. U.S. 25 E., Middlesboro KY606.248.2054
www.logancorp.com