Alpha 87a Terminal- and Fault Reset Program (HB9ZS) Picture after program start - Click to "I agree" if you accept the rules otherwise exit the program.

Main Window

Com Port Settings

Set the COM port using the drop down menus of the program. Any free COM port between 1 and 20 can be used.

Standard: Com1, Speed: 4800, Parity: None, Databits: 8, Stopbits: 1

Load a Command File in to the Command List Try for the first time the "Info 1.rst" file in the program folder.

Load the file in to the command list - Click on "Load file from Hard Disk" using the drop down menus of the program.

- Open the file

- The file is now loaded in to the command list.

- If the Com Port is not open

- Open the Com port by using the third icon.

Edit the Command List

- Double click the first line - Edit the command - Terminate the line with "Enter" - Next line, same procedure

Send the list to the Alpha - Open the Com Port - Click the second Icon

The result

Manual Operation - Open the Com Port - Write the commands in to the Window "Send to Alpha" - Terminate each command with "Enter" - the answer of the Alpha is in the Window "Terminal (msg from Alpha)"

Reset Soft- and Hard Faults - Open the Com Port - Click to the first Icon (Yellow)

You are not allowed by the program to reset the fault code memory more than one time.

For more information please contact HB9ZS.