CMS-MARK-WIN 1 Labeling software

~~._r-9 AlS41d Aige I

JIB

LLJ 1111

!J tIIWIII

o~oocooaoc

TI=ITI=11.1.1-~

If

r, .,. .r . .

Continuous flow of dataCMS-MARK-WIN makes it

possible to import labeling data storedin CAD/CAE programs to the labelingsoftware and from there to the outputdevices . Special markings can also beordered directly from PhoenixContact with the order module .

Manual data entryA multitude of convenient

functions are available for enteringdata by hand, e .g . enumeration, copyand duplication functions, input viavariables, and WYSIWYG real graphicform .

Output equipmentCMS-MARK-WIN makes it

possible to process and outputprinting data via plotters, laser, matrixand thermal transfer printers and theWIREMARK conductor marking tool.It is also possible to switch to otherWindows applications.

486 Phoenix Contact

CMS-MARK-WIN labeling

software

Professional labeling of systems andcontrol cabinets is becoming increasingly

ortant. CMS-MARK-WIN waseloped specially for this task.Use is made of the powerful Windows"-'

operating systems.The marking materials for terminal

blocks, conductors, cables and electricalequipment are labeled with the labelingmodule. It is thus possible within just a shorttime, to import and then further process theASCII format labeling as laid down in theCAD/CAE system during project planning .

CMS-MARK-WINLabeling software

Type Order No . Pcs.Pkt.

CMS-MARK-WIN allows markers to beprinted, plotted, cut, milled and drilled . Thechoice of devices for the output of theprojects is varied:- Thermal transfer printer

- WIREMARK conductor marking tool

- Laser printer

- Matrix printer

- Plotter (e .g. CMS-P1-PLOTTER)

- CMS GRAV 32 engraving machine- CUTFOX 10 .

Description

CMS-MARK -WIN software,languages : German / English / French! Italian . for marking terminalblocks, conductors, cables and electrical equipment on the outputdevices plotter, printer and engraving machine, Manual, incl.manual and demonstration version of CLIP PROJECT 5 .0.

CMS-MARK -WIN demonstration software, version 2 .3,languages : German / English / French / Italian,incl . demonstration version of CLIP PROJECT 5 .0

CMS-MARK -WIN manual,for the CMS-MARK-WIN labeling software, in German and English

CMS fonts,for CMS-MARK-WIN software, incl . description

Technical dataFunctions

Input of labeling dataData import from CAD/CAE systems

Material generator / special character generatorSaving data

Output of dataMinimum hardware requirements

CPU

Main memoryHard disk memory

InterfacesCD-ROM drive / floppy drive

MonitorOperating equipment

There are a host of convenient functionsfor entering data by hand, such as:

- Listing function

- Copy and duplication functions

- Input via variables.The different marking materials to be

labeled can be changed or added to asdesired . Special symbols for electricalengineering are included as a standardfeature.

CMS-MARK-WIN also includes acomprehensive graphics module . Using thisCAD interface, all kinds of two-dimensionalgraphics can be created . For example, tocreate nameplates or frontplates .

CMS-MARK-WIN-DEMO

51 44 40 8

1

CMS-MARK-WIN-UM

5144369

CMS-FONTS/WIN

50 67 70 5

1

Yes

YesYes / Yes

YesYes (full version) / No (demonstration version)

Depending on the operating system

Min . 16 MB / NT 4 .0 : min. 32 MBMin . 20 MB free

One per connected output deviceYes / Yes, IBM-compatible 1 .44 MB

Min . VGA with 640 x 480 resolution

Keyboard . mouse recommended

The individual objects and steps aregenerated as graphics with the aid of graphicfunctions . Further special functions are alsoavailable:— Barcode

- Linear and circular scaling

- Marking panels on machinesCircular inscription functionPath correction with closed elementsSymmetrical drilling patternsImport of graphics.The drawings and graphics entered are

displayed on the screen in WYSIWYG realgraphic form . This makes a test printunnecessary.

CAD/CAE51 44 39 8CMS-MARK-WIN

Phoenix Contact 487

WIREMARK conductormarking machine

The marking machine WIREMARKmarks solid and stranded conductors of0 .5 mm 2 to 6 mm 2 in only 3 seconds . Up to80% of time is saved compared withconventional conductor marking systems.

No retrofitting or adjustments when thecross sections are changed . When aconductor is inserted, it is automaticallymeasured and a suitable marker is created.The labeling is created with the integratedthermal transfer printer. The data ismanually created in the supplied CMSlabeling software or simply imported fromthe CAD/CAE project data.

The finished labeling data is saved on thememory card . In this way, WIREMARK canbe operated independently of the PC.Together with the automatic cutting toolCUTFOX 10 (see page 497) and theautomatic crimping tools (see page 494), anindividual modular and mobile wiring centercan be put together.

WIREMARK

Description

Type

WIREMARK conductor marking tool,foil magazine 15 mm . ink ribbon . memory card ., connection cable

WIREMARK(parallel and serial), operating instructions

Starter set, complete for WIREMARK,consisting of:- WIREMARK with foil magazine WIREMARK-FM 15- CMS-MARK-WIN marking software WIREMARK DEMO-KIT- Labeling foil WIREMARK-F 15- Transport case with extending handle and rollers

Manual for WIREMARK,user manual in the languages

WIREMARK-UMD . GB,I,E,NL .F

Technical data of WIREMARKPrint method

Thermal transferPrint resolution

[dpi]

300Processable conductor cross section

[mm']

0 .5 - 6Processable conductor diameter

[mm]

1 .8 - 5 .6Interfaces

Serial and parallelPower supply

[Mil [Hz]

110 - 240 / 50 - 60Dimensions (without foil magazine)

L x W x H [mm]

250 x 370 x 455Weight (without foil magazine)

[kg]

21 .5

PPOrder No.

5068005

51 44 43 7

51 44 36 9

A''0'0001F' 10iiiip_1( s .)

Markers can be turned and moved along tconductor for easy positioning.

488 Phoenix contort

WIREMARK creates markers with awidth of 15 mm and 23 mm . They arecreated from a special foil that is fed into thedevice on reels of 100 m each, whichcorresponds to approx . 6000 markers.Since markers for different cross sectionsare created from this off-the-reel material,WIREMARK considerably reduces thevariety of material and thus storage costs.

The data can be directly imported fromthe PC to WIREMARK or stored on amemory card that is included in the scopeof delivery of the device . A storage unit is

lionally provided to conveniently storedata on the memory card in the planning

office without WIREMARK.

WIREMARK-FB/H24

WIREMARK-F. ..

Description

Foil magazine for WIREMARK,for accommodating the marking foil, 15 mm wide

Foil magazine for WIREMARK,as above, however, 23 mm wide

Marking foil for WIREMARK,roll length 100 m, 1 roll Y 6000 tags, depending on theconductor cross section . 15 mm wide

Marking foil for WIREMARK,as above . however, 23 mm wide

Ink ribbon for WIREMARK,300 m long, 24 .5 mm wide, printing color : Black

Storage unit for WIREMARK,for writing on the memory card

Memory card for WIREMARK,ATA flash card, type II . 16 MB

WIREMARK-FM . ..

Type Order No . PP k,.

WIREMARK-FM 15 51 44 13 6

WIREMARK-FM 23 5144149 1

WIREMARK-F 15 51 44 04 2

WIREMARK-F 23 51 44 05 5 1

WIREMARK-FB/H24 51 44 12 3

WIREMARK-MC-D 51 44 06 8 1

WIREMARK-MC 51 44 07 1 1

WIREMARK accessoriesconductor marking machine

['C]

['Cl

[mbps]

Technical data of ink ribbonMaterial quality

Technical data of marking foilMaterial

Temperature rangeColor

Wipe resistanceTechnical data of storage unit

System requirementsOperating temperature

Conformity

InterfaceTransmission rate

Power supplyDimensions

L x W x H [mm]

Weight

[kg]

') Also available in yellow on request .

Foil specially coated with PEPT-40 to +70 (duration), briefly up to +100

WhileDIN EN 61 010-1 / VDE 0411 P.1

WIN 95/98/ME, WIN NT 4 .0, WIN 2000

0 to +70CE

CentronicsUp to 1

5 V via keyboard adapter174x 109 x 35

0 .6

Phoenix Contact 489

Thermal transfer printer

The inexpensive CMS-THERMO S1 issmall enough to fit on any workplace.Positioning perforations in the markingmaterial make changing the material simplerand more efficient.

The thermal transfer printer is easy touse and is used for a great variety ofapplications, such as conductor, cable andelectrical equipment labeling.

The high print resolution of 300 dpi(12 dotslmm) means that first-class printingquality is achieved . The use of high-qualityresin-based ink ribbons makes markingresistant to mechanical and chemicalinfluences . This means that the labeling canbe used in a harsh industrial environment.

In conjunction with CMS-MARK-WINlabeling software, this printer provides anefficient solution for all labeling tasks .

I]

CMS-THERMO S1

Thermal transfer printer,incl . power supply unit, connection cable, Windows' printer driver

CMS-THERMO S1and operating instructions

Ink ribbon,length : 91 m, width : 110 mm

Printing color:

CMS-X-FB/H110(not for PSS shrink sleeves)

BlackCleaning pen,for thermal transfer printers

Description

Type

CMS-TTP-CS

Order No.

51 44 99 0

51 44 32 7

1

5067789

P kPk

Starter set, complete for CMS-THERMO S1,consisting of:- Labeling software CMS-MARK-WIN- Thermal transfer printer CMS-THERMO S1- Ink ribbon CMS-S-FB/H110- Roll of labels

Transport case for CMS-THERMO S1,rounded profile case with aluminum frame for a complete system,consisting of printer, accessories and label rolls

Technical dataPrint resolution [dpi] 300

Max . print width [mm] 100Print method Thermal transfer

Interfaces Serial, parallel, USBPower supply [V]

[Hz] 110-230150-60

Dimensions L x W x H [mm] 250x230x170

Weight [kg] Approx .2

CMS-KIT S1

CMS-CASE-THERMO S1

51 45 00 9

1

51 45 01 2

490 Phoenix Contact

Thermal transfer printerCMS-THERMO X1

The new thermal transfer printerCMS-THERMO X1 has been developed asthe successor of the CMS-TTP 3-300, whichhas already been successfully introduced tothe market, and rounds off PhoenixContact ' s product range in this printersegment.

It has now been possible to reduce theweight of the CMS-THERMO X1 by approx.25% to a mere 10 kg, while at the same timethe main performance data have beenconsiderably improved . The printing speedhas thus increased to 150 mm/s and the

max . printing length to 1000 mm .Description

Thermal transfer printer,incl . power supply unit . Centronics connection cable, Windows"printer driver and operating instructions

Cutting option,for CMS-THERMO X1

Ink ribbon,length : 300 in, width : 110 mm

Printing color:(not for PSS shrink sleeves)

Black

Starter set, complete for CMS-THERMO X1,consisting of:– CMS-MARK-WIN labeling software– Thermo transfer printer CMS-THERMO X1– Ink ribbon– Roll of labels

Transport case for CMS-THERMO X1,rounded profile case with aluminum frame for a complete system,consisting of printer, accessories and label rolls

Type Order No . Pcs.Pkt.

CMS-THERMO X1 51 44 29 1

CMS-CUTTER X1 51 44 30 1 1

CMS-X-FBIH110 51 44 32 7

CMS-KIT X1 51 44 31 4 1

CMS-CASE-THERMO X1 51 44 48 2 1

CMS-TTP-CS 50 67 78 9

Phoenix Contact 491

Cleaning pen,for CMS-THERMO XI printer head

The CMS-THERMO X1 processes all off-the-reel materials from the large productrange.

A cutting knife can be used as an optionso that off-the-roll material can be cutprecisely to the desired length.

Technical dataPrint resolution

[dpi]

300

Max. printing width

[mm]

108

Max . printing length

[mm]

1000

Interfaces

Serial and parallelPower supply

[V] I [Hz]

100-240/50-60

Dimensions

L x W x H

[mm]

446 x 242 x 274Weight

[kg]

10

CMS-THERMO X1

Marking plotterCMS-PI-PLOTTER

With CMS-P1-PLOTTER, dried outpens are a thing of the past . The plotterpens can remain in the pen station even forprolonged intervals . They are automaticallyremoved and stored . The automaticPrepare Pen function ensures optimummarking results right from the firstcharacter.

The plotter is controlled via theCMS-MARK-WIN software (see p . 487) . Itcan be connected to the computer quicklyand easily via a Centronics or USB interface.Hardly any buttons are required to operatethe CMS-P1-PLOTTER, making markingchild's play.

The plotter pens can be stored safely forlonger intervals in the double seal stationwithout drying out.

CMS-PI-PLOTTER

Description

Marking plotter,

Type

Order No. PcslPkt.

incl . manual, connection cable (Centronics and USB) . plug-inpower supply unit (100 - 240 V AC / 50-60 Hz) and marker penStarter set, CMS-P1-PLOTTER,consisting of..- Marking software CMS-MARK-WIN

CMS-PI-PLOTTER 51 44 61 5

- Plotter CMS-PI-PLOTTER- Magazines for ZB, ZBF, PABA and GPE and labeling material- CMS-INK-WS-05 ink and cleaning set

Transport case, for CMS-PI-PLOTTER,

CMS-PI-PLOTTER-KIT 51 44 62 8

rounded profile case with aluminum frame for a complete plottersystemCover for CMS-PI-PLOTTER,

CMS-PI-PLOTTER-CASE

51 44 63 1

flexible cover to protect against dirt

Pen station sealing set,

CMS-PI-PLOTTER-COVER

51 44 80 6 1

4 replacement seals for the pen station of the P1 plotter and 10prepare pen plates

CMS-PI-PENDEPOT

51 44 83 5

Technical data

440 x 29610 .5 (optional 15)

40

Parallel (Centronics) . USB Level 1 .1

160.01

0 .05 (even when pen is changed)660 x 440 x 125

Approx. 8Via separate plug-in power supply unit

100 - 240 (50-60) / max. 0 .3241 max. 1 .4

Operation : +10 to +35 / 35 to 75Storage : -10 to +50! 10 to 90

Corresponds to : UL-UL1950, CSA-9501 VDE EN 60950

Corresponds to. FCC Class B, FCC Part 15 andVDE Class B EN 55 022

------- ---- -- - --

Max . plotting area

Max . material heightMax . plotting speed

InterfacesData buffer

Addressable resolutionRepeat accuracy

DimensionsWeight

Power supply

Input voltage/currentOutput voltage/current

Temperature / rel humidity

[mm]

[mm)[cm/sec]

[V AC (Hz)]! [A][V AC (Hz)] / [A]

NI / N.]

Certificates and standardsSafety certificate

Immunity to interference

492 Phoenix Contact

Interchangeable magazines,ink, cleaner and pens forlabeling plotter

The CMS-PI-PLOTTER is the bestchoice for a versatile marking device forindustrial applications . All the conventionalmarking material can be labeled using thisdevice . It is also possible to process partiallyused marker sheets or finish partial labelsusing the sturdy plastic magazines.

As a result of their size, they fully utilizethe capacity of the plotter. In this way, up to35% more material can be processed withthe CMS-P1-PLOTTER in each markingrocess than with the previous model.

enix Contact offers a multitude oferent magazines for marking materials . If

you do not find a suitable magazine for yourmaterials, please contact us.

The materials are labeled according to~quirements with pens of varying

thickness . The ink is available in cartridgesto facilitate filling the pens .

Description

Plastic magazine for CMS-PI-PLOTTERfor accommodating:

- 22 Zack marker strips- 26 flat Zack ribbon or ZBN strips- 2 Zack marker sheets- 3 flat Zack marker sheets- 22 contactor marker Zack marker strips- 4 to 6 PABA marker bars- 30 marker pins ZB strips- 1 GPE label sheet- 20 strips LBHZ conductor marking- 1 Wago WMB sheet- 2 Wago WSB Mini sheets- 2 Wago WSB 4 sheets- 2 Wago WSB 5 sheets- 1 Weidmuller Multicard sheet SF 4-6- 1 Weidmuller Multicard sheet universal- 2 Murrplastik sheets KS 4/12, 4/18 . 4/23 .. 4/30- 2 Murrplastik sheets KES, KLG, KMR, KPX, KSA . KSF, KSI.KSK, KS 15x17/27/49/67, KSO, KSS, KTE .KWI .SKS .WGO,KAB- 3 Wieland sheets, type 50 . 51 . 60. 63, 67, 68 . 69, 80- 2 Entrelec sheets RC55-85 . RC410-810, RTC610/810/1010

Magazine for accommodating sheet material,self-adhesive mat for fixing labels, foils and paper, size of sheetmax. DIN A4Adapter plate for WMU magazines,for use of the universal interchangeable frame CMS-WMU with themagazine inserts of the CMS-MCP 3 plotter

Replacement fixation pad for CMS-P1-M/ZBFM,9 self-adhesive pads ., sufficient for 3 magazines

Replacement fixation pad for CMS-PI-M/ZBFM,3 self-adhesive pads, sufficient for 3 magazines

Replacement fixation pad for CMS-P1-M/GPE,1 fixation pad, sufficient for 1 magazine

Replacement fixation pad for CMS-PI-PAD,1 fixation pad in DIN A4lormat

Disposable pens, non-refillable plotter pen, incl.pen station, fully filled with 1 ml CMS-INK-WS ink 0 .25 mm

0 .35 mm

Disposable pens,as above, but filled with 1 ml CMS-INK-WO ink 0 .25 mm

0 .35 mm

Pens, incl . adapter, ink tank and pen station, for 0 .25 mmdifferent line thicknesses, without ink 0 .35 mm

0 .5mm

Cleaning set for marker pens, consisting of :1 cleaning cup, 2 cartridges of 10 ml cleaning liquid each and 2spare sealing caps for the pen station

Cleaning cartridges with spare sealing caps,2 cartridges with 10 ml each of cleaning liquid and 2 caps

for CMS-PEN .. ..for CMS-PEN-D/AD with adapter CMS-D/AD LBHZ

Special ink for CMS-PEN . . .,

Requirement:5 ink cartridges of 1 ml each, color : Black

NormalHigh

CMS-PEN

g

CMS-INK- . . .-05

Type Order No . Pcs.Pkt.

CMS-PI-MM 51 44 69 9 1CMS-PI-M/ZBF 51 44 70 9 1CMS-PI-M/ZBM 51 44 66 0 1CMS-Pl-M/ZBFM 51 44 68 6 1CMS-PI-M/SS-ZB 51 44 71 2CMS-PI-M/PAB 51 44 74 1 1

CMS-PI-M/BN-ZB 51 44 72 5 1CMS-PI-M/GPE 51 44 75 4 1CMS-PI-M/LBHZ 51 44 73 8 1CMS-PI-M/WAGO WMB 51 44 76 7 1CMS-PI-M/WAGO MINI WSB 51 44 86 4 1CMS-PI-M/WAGO WSB 4 51 44 87 7 1CMS-PI-M/WAGO WSB 5 51 44 77 0 1

CMS-PI-M/WEID MCSF 4-6 51 44 78 3CMS-PI-M/WEID MCU 51 44 79 6 1CMS-PI-M/MURR 400 51 44 94 5 1CMS-PI-M/MURR 401 51 44 95 8 1

CMS-P1-MIWIEL 51 44 92 9 1CMS-PI-MIENTRELEC RC 51 44 93 2

CMS-P1-PAD 51 44 81 9 1

CMS-PI-WMU-ADAPTER 51 44 82 2

CMS-PI-M/zBFM-PAD 51 44 84 8 9

CMS-PI-M/WEID-PAD 51 44 85 1 -

CMS-P1-M/GPE-PAD 51 44 88 0 1

CMS-PI-PAD/SPARE 51 44 89 3

CMS-DISPOSABLE-PEN 0,25 WS 51 45 06 7 1CMS-DISPOSABLE-PEN 0,35 WS 51 45 07 0 1

CMS-DISPOSABLE-PEN 0,25 WO 51 45 09 6 1CMS-DISPOSABLE-PEN 0,35 WO 51 45 08 3

CMS-PEN 0,25 50 67 81 5 1CMS-PEN 0,35 50 67 82 8 1CMS-PEN 0,50 50 67 83 1 1

CMS-R-SET WO 0809764 1

CMS-R-FLUID-WO-C2 51 44 09 7 2CMS-R-LBHZ-WO-C2 51 44 10 7 2

CMS-INK-WS-05 0811529 5CMS-INK-WO-05 51 44 08 4 5

CMS-PI-M . ..

O

CMS-R-SET- . . .

Phoenix Contact 493

Portable automatic strippingand crimping tool for tapedproducts

The automatic stripping and crimpingdevice, CF 3000-2,5 processes tapedferrules with insulating sleeves in acc . withDIN 46 228-4 in an extremely efficient way.Using this device, up to 1200 conductorsper hour can be stripped and ferrules addedin one operation . The CF 3000-2,5 issuitable for both preassembling andattaching conductors directly at the controlcabinet . The device can be adapted tovarious cross sections within a minute .

Description

Color

Automatic stripping and crimping device,for insulated taped ferrules 0.5-2.5 mm' in acc . withDIN 46 228-4: 1990-09

Automatic stripping and crimping device, 120 V design,for insulated taped ferrules 0 .5-2.5 mm'' in acc . withDIN 46 228-4 :1990-09Spare locator

Type

Order No.

Pcs.Pkt.

CF 3000-2,5

12 05 47 7

CF 3000-2 .5 120V

12 05 51 6

1

Type Order No. Pte'Pkt.

0 .5 mm 2 CF 3000 LOC 0 .5

12056390.75 mm r CF 3000 LOC 0,75

12056421 .0 mm r CF 3000 LOC 1 .0

12056551 .5 mm r CF 3000 LOC 1 .5

12056682 .5 mm 2 CF 3000 LOC 2 .5

1205671

Taped ferrules,with plastic insulating sleeve, 0 .5 mm' White Al 0,5-8 WH-B ') 3201 369 1000

Orange Al 0,5-8 OG-B 32 01 56 3 1000

Taped ferrules, Gray Al 0,75-8 GY-B ') 32 01 37 2 1000as above, however 0 .75 mm 2 Blue AI 0,75-8 BU-B 32 01 54 7 1000

White AI 0,75-8 WH-B 32 01 57 6 1000

Taped ferrules,as above, however 1 .0 mm% Red Al 1-8 RD-B I) 32 01 38 5 1000

Yellow AI 1-8 YE-B

I 32 01 58 9 1000

Taped ferrules,as above, however 1 .5 mm Black AI 1,5-8 BK-B ') 32 01 39 8 1000

Red AI 1,5-8 RD-B 32 01 59 2 1000Taped ferrules,as above, however 2.5 mmr Blue Al 2,5-8 BU-B ') 32 01 40 8 500

Gray Al 2,5-8 GY-B 32 01 55 0 500

Dimensions

Width l length ? height [mm] 1651320 l 300Weight [kg] 13

Cycle [s] 1 .2Area of application

Conductor [mm r ] 0 .5-2 .5

Conductor [AWG] 20-14

Mains connection [VAC]1[Hz] 230/50Power consumption [VA] 80

Compression Trapezoidal in acc. with DIN VDE 0660-100 : 1992-07') Color range in acc . with DIN 46 228-4 : 1990-09.

CF 3000-2,5

494 Phoenix Contact

Taped ferrules with plasticinsulating sleeves for automaticcrimping devices

I 1

1 2

It i i11!1i.~Tf (]I .%

Al ., .-B

Cross section Dimensions [mm] Type Order No. Pcs.Pkt.[mm'] AWG I c d,I . d z S 2

0 .5 20 14 .00 8 .00 1 .10

0 .15 2 .50 0 .25 AI 0,5-8 WH-B 32 01 36 9 1000

0 .75 18 14 .00 8 .00 1 .30

0 .15 2.80 0 .25 AI 0,75-8 GY-B 32 01 37 2 1000

18 14.00 8.00 1 .50

0 .15 3 .00 0.30 AI 1-8 RD-B 32 01 38 5 1000

1 .5 16 14 .00 8 .00 1 .80

0.15 3 .40 0 .30 AI 1,5-8 BK-B 32 01 39 8 1000

2 .5 14 14 .00 8 .00 2 .30

0 .15 4.20 0.30 AI 2,5-8 BU-B 32 01 40 8 500

0 .75 18 14.00 8 .00 1 .30

0 .15 2 .80 0 .25 AI 0,75-8 BU-B 32 01 54 7 1000

2 .5 14 14 .00 8 .00 2 .30

0 .15 4 .20 0 .30 AI 2,5-8 GY-B 32 01 55 0 500

0.5 20 14.00 8 .00 1 .10

0 .15 2 .50 0.25 AI 0,5-8 OG-B 32 01 56 3 1000

0 .75 18 14 .00 8 .00 1 .30

0 .15 2 .80 0 .25 AI 0,75-8 WH-B 32 01 57 6 1000

1 18 14 .00 8 .00 1 .50

0.15 3.00 0 .30 AI 1-8 YE-B 32 01 58 9 1000

1 .5 16 14.00 8.00 1 .80

0 .15 3 .40 0.30 Al 1 .5-8 RD-B 32 01 59 2 1000

Material E-CUCoating

Tin-platedPlastic sleeve material PolypropyleneLong-term temperature

[°C]

105Short-term temperature

[°C]

120

Color designations

Color

Alphabet codeWhite

WHRed

RDBlue

BUYellow

YEGray

GYOrange

OGBlack

BK

Description

Taped ferrules,with plastic sleeve,color range in acc . with DIN 46 228-4 : 1990-09

Q

Taped ferrules,with plastic insulating sleeve, color range in acc . with

>♦NF C 63 023:1994-02

Taped ferrules,with plastic sleeve, color range in acc . with Weidmiillerstandard

Phoenix Contact 495

Automatic stripping andcrimping device, CF 1000

The automatic stripping and crimpingdevice CF 1000 processes taped ferruleswith insulation sleeves in acc . withDIN 46 228-4 . Using this device, approx1200 conductors per hour can be strippedand ferrules added in one operation.

Only a few motions are necessary toretrofit the CF 1000-1,5 to different crosssections . When the corresponding tip ischanged, all parameters are set to thedesired cross section without anyadjustment work . CF 1000

Description

Type

Automatic stripping and crimping device,for insulated ferrules in acc . with DIN 46 228-4: 1990-09,

CF 1000-1,5 230V

12 08 19 9for cross sections from 0 .5 mm' to 1 .5 mm

Automatic stripping and crimping device, for insulated ferrulesin acc. with DIN 46 228-4 : 1990-09, for cross sections from0.5 mm' to 1 .5 mm',120 V versionTool kit for CF 1000, for insulated ferrules in acc . withDIN 46 228-4 : 1990-09, for cross sections:0.25 -0.34 mm' (AWG 24-22), stripping length : 6 mm CF-1000-TOOLKIT 0,34/6 12 08 21 20.25-0 .34 mm- (AWG 24-22) . stripping length: 8 mm CF-1000-TOOLKIT 0.34/8 12 08 22 5

10.5 -2 .5 mm" (AWG 20-14), stripping length : 8 mm CF-1000-TOOLKIT 2,5/8 12 08 24 1

14 mm- (AWG 12-22), stripping length : 6 rnm CF-1000-TOOLKIT 4,0/10 12 08 27 0

1

Spare knife,V-shaped, for CF 1000 CF-EM 12 05 21 5

1

DimensionsWidth . length / height [mm] 240 / 490 / 380

Weight [kg] 28Cycle [s] 2 .5

Compression TrapezoidalArea of application See description

Mains connection [VAC] / [Hz] 230 / 50Compressed air connection

1/4" plug nipple internal thread (European standard) [bar] 4 - 6

Air consumption with 5 bar [I/cycle) 1 .5

Type Order No. PcsPkt

CF 1000-1,5 120V 12 08 20 9

CF-1000-TOOLKIT 0,34/6 12 08 21 2CF-1000-TOOLKIT 0,34/8 12 08 22 5CF-1000-TOOLKIT 2,5/8 12 08 24 1CF-1000-TOOLKIT 4,0/10 12 08 27 0

CF-EM 12 05 21 5

240 / 490 / 380

282.5

Trapezoidal

See description

120 / 60

4 - 6

1 .5

Pcs.Pkt.Order No.

496 Phoenix Contact

Automatic cutting device forcables and sleeves up to 0 8 mm

The cutting device, CUTFOX 10 cutscables, litz wires, shrink sleeves and similarprofiles up to 8 mm in diameter, and isparticularly suitable for series production.Operation is extremely easy, the desiredlength and number of conductors is eitherentered directly in the CUTFOX 10 usingthe membrane keyboard or can beprocessed and documented on the PC usingthe software supplied . The cutting devicecan then be controlled directly from the PCvia the interface .

•cription Type Order No. Pcs.Pkt . Type

Order No . Pcs.Pkt.

Cutting device.for cables, litz wires and shrink sleeves CUTFOX 10 1206829

Cutting device,as above. however, for 120 V mains voltage CUTFOX 10/120V

12 06 83 2 1

Dimensions

Width / length / height [mm] 190/290/220 190 / 290 / 220

Weight [ kg] 10 10

Cutting efficiencyFine strand [mm'-] 0 .25-10 0 .25-10

Solid strand [mm'] 0 .25-2.5 0 .25-2 .5

Max . throughput [mm] 8 8

Cross section setting

Number of cuts [Pcs.]

Automatic

1-99 .999

Automatic

1-99.999

Length [mm] 2-99 .999 2-99.999

Feed rate [m/s] 0 .5 0 .5

Unit of measurement

Dialog languageInterface

mm / inch

German / English / French / Italian

RS-232

mm / inchGerman / English / French / Italian

RS-232

Mains connection [V AC / Hz] 230/50 120 / 60

Power consumption [VA] 80 80

CUTFOX 10

CUTFOX is a registered trademark of Phoenix Contact

To lead in the conductor, just swingopen the front paneling . The drive andmeasurement rollers are moved apartautomatically and the material can thus bechanged in the shortest possible time.Adjustment work is not necessary. The highdimensional accuracy from the first to thelast cut is the result of the automatic"zero cut" when the start button is pressed.

Phoenix Contact 497