4633 Old Ironsides Drive, Suite 304, Santa Clara, CA 95054, USA

Document Version 0.5. February 2008 1

CoCo-80 USB driver Installation

The USB connection is the easiest method to connect the CoCo-80 to a PC. This requires the following steps:

Install the EDM software on the PC. Install the RNDIS USB driver on the PC.

Connect CoCo-80 to the PC through the provided USB cable. This cable has a mini-client port

connecting to the CoCo-80 and a flat USB port connecting to the PC.

The following procedures describe how to install the RNDIS USB driver on the PC. This installation assumes

that the user has an installation CD that includes the device driver files.

Connect device using USB interface with PC, system will show a Found New Hardware message:

The computer will prompt the following dialog box:

4633 Old Ironsides Drive, Suite 304, Santa Clara, CA 95054, USA

Document Version 0.5. February 2008 2

Select “No, not this time” and click the Next button, then select “Install from a list or specific location

(Advanced)” and click Next.

Select “Include this location in the search:”

4633 Old Ironsides Drive, Suite 304, Santa Clara, CA 95054, USA

Document Version 0.5. February 2008 3

Click Browse button, then select the CoCoUsb driver folder on the CoCo-80 software CD and click Next.

Click “Continue Anyway” when following dialog box popup:

4633 Old Ironsides Drive, Suite 304, Santa Clara, CA 95054, USA

Document Version 0.5. February 2008 4

The Windows starts copying the drive files into the system and install them.

4633 Old Ironsides Drive, Suite 304, Santa Clara, CA 95054, USA

Document Version 0.5. February 2008 5

Finally click the “Finish” button.

The installation of the driver is finished. To confirm, you can use the Device Manager of Windows, if an item

called “CI CoCo80 USB Remote NDIS Network Device” appears under the Network Adapters, the driver has

been installed successfully.