cold chamber 160
TRANSCRIPT
-
7/29/2019 Cold Chamber 160
1/16
please consider the environmental responsibility before printing this mail. 1
BAO YANG COLD CHAMBERDIE CASTING MACHINE
TECHNICAL SPECIFICATION
& QUOTATION
B.Y. MACHINERY CO., LTD
Tel: +86 757-28816626
Fax: +86 757-26618296
E-mail: [email protected]: www.sdbmc.com
-
7/29/2019 Cold Chamber 160
2/16
please consider the environmental responsibility before printing this mail. 2
Content
Quotation.............................................................................................................................. 3
New EC Series Cold Chamber Die Casting Machine ...................................................... 4
Technical Data Sheet................................................................................... 4
Components & Function Instruction ............................................................. 5
A. Main Hydraulic & Electric Components Instruction................................ 5
B. Main Function Instruction ................................................................... 5
C. Other Specification ............................................................................ 6
D. Allocation accessories ........................................................................ 6
Feature Introduction ................................................................................... 7
A. Comprehensive Optimizing Die Close System....................................... 7
B. High Performance Injection System..................................................... 8
C. High Performance & Reliable Hydraulic System.................................... 9
D. Advanced Control System................................................................. 10
Automatic Ladling Machine.............................................................................................. 11
Automatic Spraying Machine ........................................................................................... 12
Automatic Extracting Machine......................................................................................... 14
Crucible Electric Melting Holding Furnace..................................................................... 15
-
7/29/2019 Cold Chamber 160
3/16
please consider the environmental responsibility before printing this mail. 3
Quotation
Item Type AmountUnit price
(USD)
Total price
(USD)Remarks
Cold Chamber
Die- Casting
Machine
EC160 1 31,818 31,818
1. With faster speed and low
pressure die closing equipment
2. Proportional electro-hydraulic
flow control & relief valve in
hydraulic system
3. Japanese Omron PLC+7HMI
4. Independent fast injection &
intensification accumulator
5. High-response logic valve in
Fast speed Injection system.
6. Germany Rexoth directional
valve
7. Japanese Yuken Hydraulic
pump or U.S.A. VICKERS
Hydraulic pump
Auto Ladle 1# 1 8308 8308 125-200T
Auto Extractor 1# 1 9077 9077 125-200T
Auto Sprayer 1# 1 9077 9077 125-200T
Melting
Furnace350kg 1 8900 8900 Below 400T
Trade Term: FOB (SHUNDE)
Payment Term: TT. 30% in advanced, 70% Upon readyness of machine before shipment.
Delivery Time: 50 days after receiving the 30% subscription.
Port of loading: SHUNDE PORT, CHINA
The above quotation is valid in 1 month.
Warranty Time: One Year
-
7/29/2019 Cold Chamber 160
4/16
please consider the environmental responsibility before printing this mail. 4
New EC Series Cold Chamber Die Casting Machine
Technical Data Sheet
ITEM UNIT EC160
Clamping Force KN 1600
Clamping Stroke mm 380
Die HeighMin-Max mm 200-550
Space Between the Bars mm 460460
Clamping
System
the Bar Diameter mm 80
Shot Injection Position mm 0,-70,-140
Max Shot Weight (AL) kg 1.8
Intensifier Injection Force
(Intensification)KN 110-270
Plunger Diameter mm 40/50/60
Casting Pressure (Intensification) MPa 185,119,82
Casting Area Cm2 86,134,195
Max Casting Area Under 40Mpa Cm2 400
Plunger Penetration mm 135
Diameter of Pressure Chamber
Flangemm 101.6/110
Injection
System
Height of Pressure Chamber
Flangemm 10
Ejector Force KN 120Ejector
System Ejector Stroke mm 90
Driving Motor KW 11
Hydraulic Working Pressure MPa 14
Hydraulic Oil Tank Capacity L 400
Machine Weight kg 7000Other
Machine Dimensions (LWH) mm 53501150 2350
-
7/29/2019 Cold Chamber 160
5/16
please consider the environmental responsibility before printing this mail. 5
Components & Function Instruction
A. Main Hydraulic & Electric Components Instruction
ITEM Brand
Hydraulic Pump Japan YUKEN ( made in China )
Electromagnetic Directional Valve German REXROTH ( made in China )
Electromagnetic Check Valve German REXROTH ( made in China )
Large Diameter Logic Check Valve VICKERS (U.S.A.)
Proportional Electro-hydraulic Flow Control &
Relief Valve (P-Q Valve)YUKEN (Taiwan)
Hydraulic Screw-in Valve SUN (U.S.A.) + WINNER(Taiwan)
Oil Seal BUSAK+SHAMBA(German) + NOK(Japan)
Oil Board Chung Chyn (Taiwan)
Filter of pump inlet Filtration accuracy (180 mesh)
Systematic oil filter of pump outletHYDAC High Pressure pipeline filter
(Filtration Accuracy 20 mesh)
PLC S200 (Siemens)
HMI 7 Inch Color Touch Screen(Siemens)
Alternating Current Contactor SCHNEIDER(Shanghai)
Proximity Switch Japan OMRON / SIKON(made in China)
Over travel-limit Switch German STEMEX (made in China)
Lineal Transducer Switzerland MIRON ( made in China )
Injection Magnetic Railing Ruler GIVI (Italy)
B. Main Function Instruction
ITEM Function Instruction Remark
Injection parameters
calculate function
Calculate injection parameters such as slow & fast
injection speed and displacement according to its
weight & dross trap.
BaoYangs
patent design
Injection parameters
monitoring function
Displace the latest 10 parameters, easy to monitor
the consistency & stability of the injection system
-
7/29/2019 Cold Chamber 160
6/16
please consider the environmental responsibility before printing this mail. 6
Input & output
monitoring function
The HMI screen can monitor the input & output
position.
Fault alarming
function
Real time machine can displace the fault, then alarm
& make the relative resolution.
C. Other Specification
1. Die close & die open displacement is controlled by lineal transducer; Injection displacement is
controlled by over travel-limit switch.
2. Machine color is B.Y. Blue, Safety door is Orange.
3. Reservation with auto extractor, auto sprayer, auto ladler position.
4. Above 630T Electric front safety door, manual back safety door.
D. Allocation accessories
NO ITEM QUY Remark
1 Injection sleeve 2 pcs
2 Injection head 2 pcs
40/50/60
(Choose 2 from the 3)
3 Injection plunger 1 pc
4 connector 1 pc
5 cushion platen 1 pc
6 tools kit 1 set
7 Core switch line 4
8 Motor switch line 69 O-ring 1 set
10 Leveling pad 1 set
11 Instruction manual 1
12 EC series maintenance manual 1
-
7/29/2019 Cold Chamber 160
7/16
please consider the environmental responsibility before printing this mail. 7
Feature Introduction
A. Comprehensive Optimizing Die Close System
>>Die close structure is optimized comprehensively, with more reasonable stroke ratio &enlargement of force. Multistep pressure & Multistep speed adjustment, is to get a smoothly and
steadily mechanism. With finite-element analysis design, platen structure is more reasonable,
more strength & stiffness.
>>Faster speed die close & low pressure die close device: faster speed die close standard device
can shorten production cycle, improving productivity; Low pressure die close standard device can
protect mould usage safety.
>>Hydraulic drive planetary gear train mould adjustment device: easy to control, safety &
reliable.
>>Capacity type electric centralized lubrication system: Controlled by PLC, and lubricate pin
shafts fixed quantity and time, ensure the die close structure keep lubricating, to guarantee
machine for a long working time. Lubrication system has low pressure & lack grease alarm
function for toggle lubrication system.
>>Accurately & reliable Lineal Transducer for movement platen displacement.
-
7/29/2019 Cold Chamber 160
8/16
please consider the environmental responsibility before printing this mail. 8
B. High Performance Injection System
>>Injection displacement is controlled by magnetic gauge, and injection stage can set on HMI
(Human-Machine Interface), therefore operation will be more accurately & safety. Fast-speed
injection transmits signal independent & intensification transmit signal independent, can keepproduct at a high quality. Injection pressure & injection speed can be step-less adjusted.
>>Non-float piston Structure injection system can reduce broken probability of injection cylinder
& fitting to nearly zero. Injection system resistance loss will be reduced, improving fast speed
injection.
>>Ratio of intensification piston rod to intensification piston area, will fulfill requirement of
injection cylinder pressure intensification. This system construction is simple, with fast reaction.
Intensification signal has 3 forms to choose: pressure triggerplacement trigger, or pressure &
placement synchronous trigger. Intensification logic valve start is directly controlled by pilot valve
without any intermediate links, fully guaranteed voltage building-up time.
>>Independent setting injection & intensification accumulator: Noninterference between
fast-speed injection & intensification, independent regulator. Germany BUSAK & SHAMBA CO.,
Ltd design and produce injection oil cylinder & accumulator oil seal, ensure injection oil cylinder &
accumulator work for a long time.
-
7/29/2019 Cold Chamber 160
9/16
please consider the environmental responsibility before printing this mail. 9
New EC Series Injection structure diagram
C. High Performance & Reliable Hydraulic System
>>Hydraulic main system adopts double proportional control system, HMI computer system, die
close lineal transducer and injection magnetic railings ruler, to machine adjust more convenient
and safety. Multi-parametric storage, is beneficial to large scale production management.
Pressure & speed can be step-less adjusted.
>>Logic valve & hydraulic screw-in valve are widely used, so reduce possibility of system inner
leaking and improve hydraulic valve working life & anti- polluted capacity.
>>Import filter of hydraulic oil pump inlet, ensure hydraulic oil pump for a long working life;Germany HYDAC high pressure pipeline of hydraulic oil pump outlet, ensure hydraulic oil system
cleanness, up-grade machine reliable.
-
7/29/2019 Cold Chamber 160
10/16
please consider the environmental responsibility before printing this mail. 10
D. Advanced Control System
>> European or Japanese PLC has stable system, excellent anti-jamming ability & high precision
control.
>>European or Japanese color touch screen can set pressure, speed & displacement data. At the
same time input & output monitor screen, alarm screen, can find machine fault and make
solution.
>>Mould memory function, can save over 20 sets mould data.
-
7/29/2019 Cold Chamber 160
11/16
please consider the environmental responsibility before printing this mail. 11
Automatic Ladling Machine
Features:
1. With five linkages, twin gear driven to enhance arm speedand stability, it also increase production output.
2. The case is mono-block; it greatly increases the precision
of machine.
3. The ladle arm forward / return and pouring / scooping are
controlled separately by inverters, thereby increasing the
ladle speed, easy to operate.
4. The linkage model allows the arm to stop smoothly even at high speed, preventing the molten
aluminum from easily spilling.
5. The electrical components are controlled by PLC, using simple touch screen for setting, with
build-in error code display for easier maintenance.
Specification/model JSLB2 JSLB4 JSLB6 JSLB8
Suitable die-casting machine 125-400T 500-800T 1000-1250T 1600T
Pouring capacity 1.0-3.5kg 3.5-8.0kg 12-15kg 12-20kg
Pouring Accuracy 2%
Pouring Speed Max.15sec Max.18sec Max.30sec Max.35sec
inside diameter of crucible Min.480mm Min.550mm Min.800mm Min.850mm
Filling Depth Min.350mm Min.450mm Min.500mm Min.500mm
Arm 750W 4P 1.5KW 4PPower supply
Dipper 200W 4P 400W 4P 750W 6P
Power supply 2380V 50-60Hz
Operating power supply DC24V
Power Capacity 1 KVA 1.5KVA
Weight of machine 203KG 214KG 336KG 510KG
-
7/29/2019 Cold Chamber 160
12/16
please consider the environmental responsibility before printing this mail. 12
Automatic Spraying Machine
Features:
1. The assembly of single arm sprayer is simple and robust, and
the movement is smooth.
2. It can be used independently or interface with die cast
machine, extractor, ladler and press machine to form
complete automated production.
3. Installed with at least two atomizers, to improve the spray in
both stationary and movable die, adjustable water volume,
and the effect of atomization becomes more prominent whendoing thin casting.
4. Die release agent spray time can be done separately for stationary and movable die, can meet
spray requirement of different products.
5. It can carry out air blowing operation while ascending, simultaneously cleaning the stationary
and movable die while ascending, maintaining a clean and dry mold surface.
6. The spray volume can be regulated.
7. The ascending and descending speeds are stable; descending speed can be abruptly reduced
in order to extend the life of shock absorber. Equipped with anti-drop locking device, this will
prevent the spray head from dropping in case of air pressure cut-off.
8. Spray can also be installed on middle row, allowing use of two different release agents that
would give better results.
9. Uses PLC control circuit, with build-in error code display for easier maintenance.
Specification/model JSSS1 JSSS2 JSSS3 JSSS4
suitable die-casting machine 150-200T 250-400T 500-630T 700-800T
Copper tubes (fixed mold) 19pcs(6) 21pcs(6) 24pcs(6)
Copper tubes (midst) 18pcs(6) 20pcs(6) 23pcs(6)
Copper tubes(movable mold) 19pcs(6) 21pcs(6) 24pcs(6)
Input air pressure 4.5-6.5kgf/c
-
7/29/2019 Cold Chamber 160
13/16
please consider the environmental responsibility before printing this mail. 13
Air pressure inlet PT1 PT1 1/4
Release agent More Than Air Source Pressure
Release agent inlet PT1/2
Adjustable horizontal distance 150mm 165mm
Ascending time 1.0s 1.2s 1.6s 2.0s
Descending time 1.2s 1.2s 1.6s 2.0s
Number of atomizer 2
Length of spray head 350mm 420mm 480mm
Long570 mm
(14pcs)
670 mm (14pcs)Length of
copper tubes Short
470mm
(56pcs) 470 mm
(48pcs)570 mm (57pcs)
Power supply 2-380V/ 220V/ DC24V
Dosage of release agent
and spraying time
Fixed mold9.9secs. (Max)
Movable mold9.9secs. (Max.)
water volume for release
agent
Water volume for fixed and movable mold is
adjustable
center distanceCenter distance between fixed mold and atomizing
nozzle is 110mm20mm
weight of machine 248KG 269KG 438KG 457KG
-
7/29/2019 Cold Chamber 160
14/16
please consider the environmental responsibility before printing this mail. 14
Automatic Extracting Machine
Features:
1. It can be used independently or interface with die
cast machine, sprayer, ladler and press machine
to form complete automated production.
2. With numerous extraction modes that is suitable
to different types of moulds and attain automated
production.
3. Uses PLC circuit, with build-in error codes display function for easier maintenance.
4. All pneumatic parts are imported from Japan to enhance durability.
Specification/ model JSEA1 JSEB2 JSEA3 JSEA4
Suitable die-casting
machine160-200T 250-400T 500-630T 800T
Width of fixed moldMAX 900mm 1100mm 1300mm 1450mm
Biscuit diameter 40-70mm 60-120mm
Pulling force 68kgf 112kgf
Adjustable distance of
Pulling direction200mm 250mm 350mm 400mm
Input air pressure 4-6.5kgf/cm2
Air pressure inlet PT3/8
Casting weightMAX 2KG 3.5KG 4.5KG 8KG
Mounting method Fixed mounting Ground mounting
Weight of machine 365KG 380KG 1200KG 1300KG
Power supply 2-380V/ 220V/DC24
-
7/29/2019 Cold Chamber 160
15/16
please consider the environmental responsibility before printing this mail. 15
Crucible Electric Melting Holding Furnace
Crucilible melting resistance is mainly used for the
melting of the aluminum/zinc alloy material, the 1000
temperature of the maximum use of the device,and
electrical compatible can automatically adjust the
heating rate and temperature control accuracy.
Features:
1. Graphite crucible and with special coatings, and long life.
2. Composite lining heating up fast.
3. The use of imported insulating materials insulation.
4. Electric box configuration suing import split scr.
5. Heating wire imported from sweden, use one year or more.
6.Aluminum water temperature to an accuracy of up to ensure product quality, reduce scrap.
7. Leaking automatic power-off protection and alarm.
Model HX-250 HX-300 HX-350 HX-400 HX-500
Rated power (KW) 45-60 50-60 65-75 65-75 75-90
Rated temperature () 850 850 850 850 850
Rated voltage (V) 380 380 380 380 380
Phase 3 3 3 3 3
Volume (kg) 60 60 60 60 60
Matchable model (kg) 160T-200T 200T-250T 250T-280T 280T-350T 350T-500T
-
7/29/2019 Cold Chamber 160
16/16
Thanks & Best regards,
MR. ALSON LEE
BAO YANG MACHINERY CO., LTD
Add: 1st Diwei Road, Damen, Daliang Town,Shunde District, Foshan City,
Guangdong Province, P. R. China.
Tel: +86 757-28816626 Mobile: +86 133 77658186
Fax: +86 757-26618296
Http:// www.sdbmc.com