Commercial Powerhouse:Cut through grease and grime and stubborn protein and soilsMatrix Enzyme Pre-Spray

For heavily soiled commercial carpet with a lot of greasy, grimy soils, you need powerful chemistry to break up and liquefy those stub-born oily binders for thorough removal.

Thankfully, there’s Matrix Enzyme Pre-Spray to help you get the job done. The chemists at Matrix developed Enzyme Pre-Spray with power-ful synthetic enzymes that quickly cut through and digest the greasiest, grimiest soils and pro-teins.

Enzyme Pre-Spray is effective at high tem-peratures, making it perfect for use with your truck mount or high-heat portable. Plus, Ma-trix Enzyme Pre-Spray is ultra-concentrated, just a couple scoops is all you need for great results.

Matrix Enzyme Pre-Spray has a high pH and is not safe for use on stain-resistant carpet.

Dilution and Usage Instructions

Dilution:• Pump-up sprayer: 2 scoops per gallon of hot water• Hydro-Force sprayer: 6 scoops per 5 quarts of hot water

Directions for Heavily Soiled Commercial Carpeting:1. Vacuum carpet thoroughly.

2. Dilute Matrix Enzyme Pre-Spray into a pump-up or inline sprayer and spray onto all traffic lane areas.

3. Use a groomer to groom in the pre-spray and allow a 10-minute dwell time. Do not allow pre-spray to dry on carpeting.

4. Put diluted detergent such as Matrix Confidence Premium Extraction Detergent into carpet extractor and clean carpet.

5. To neutralize carpet, dilute an acid rinse such as Matrix All Fiber Rinse into a pump-up sprayer, inline sprayer, or extractor and apply to carpet.

6. Set air movers in room to speed dry carpet.

pH:11.3 - 11.6 • NOT safe for use on stain-resistant carpet