con voi leader nel mondo with you leader in the … it-uk_sd.pdf · con voi leader nel mondo with...
TRANSCRIPT
CON VOILEADER NEL MONDO
WITH YOULEADER IN THE WORLD
MADE IN ITALY
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
2
Con voi leader nel mondoMICROSISTEMI da oltre 20 anni produce dispositivi elettronici ed opto-elettronici per ascensori, montacarichi, porte automatiche,
scale mobili, bussole antirapina, controllo accessi e rilevamento passaggi.
Una attivita’ caratterizzata da attenzione al Cliente e alle Sue problematiche, impegno costante e continui investimenti che hanno portato alta specializzazione di prodotto, collaudata qualità costruttiva ed elevata affi dabilità di funzionamento.
Questi sono solo alcuni dei punti di forza riconosciuti ogni giorno dai numerosi e affezionati Clienti, che determinano il valore aggiunto del prodotto MICROSISTEMI - l’azienda italiana che con oltre 500.000 componenti installati in impianti di tutto il mondo è
garanzia di qualità ed affi dabilità “made in Italy”.
All’interno del nostro catalogo troverete una vasta gamma sempre disponibile a magazzino di barriere multiraggio, fotocellule a sbarramento (1, 2, 4 o 6 raggi ), fotocellule con elettronica incorporata ed uscita a transistor, fotocellule speciali, sirene di allarme,
alimentatori di emergenza, avvisatori di arrivo al piano, luci di emergenza.
Vi invitiamo a visitare frequentemente il nostro sito per seguire le novità e gli aggiornamenti tecnici della nostra produzione.
With you leader in the world
For more than 20 years MICROSISTEMI has been producing electronic and optoelectronic devices for lifts, good-lifts, automatic doors, moving staircases, anti-theft inner doors, controlled accesses and controlled passages.
Our activity is characterized by great attention to the client and to its problems, by continuous commitment and investments that
have brought to specialized products, tested constructive quality and high operating reliability.
These are some of the points of strength recognized every day by our numerous and affectionate customers that determine the high value of the product MICROSISTEMI - the Italian company which is guarantee of quality and “made in Italy” reliability thanks to
more than 500.000 components installed in plants all over the world.
In our catalogue you will fi nd a wide range of articles always in stock such as light curtains, photocells (1, 2, 4 or 6 beams), stand-alone photocells with transistor output, special photocells, lift alarms, emergency power supplies, lift arrival gongs, and emergency
lights. We advise you to visit our web site often in order to be informed about the innovations and the technical updatings of our
production.
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
3
Serie CL / CL Series 4Serie EL / EL Series 5Serie CLP / CLP Series 6-7Serie K / K Series 8Serie CC / CC Series 9
Serie LN / LN Series 10-11Serie PS / PS Series 12Serie KIT / KIT Series 13Serie SKE / SKE Series 14
Serie GN / GN Series 15
Serie AL - ALA - ALB - AS / AL - ALA - ALB - AS Series 16Serie ALR / ALR Series 17Serie ALP / ALP Series 18Serie ALD / ALD Series 19
Serie LD / LD Series 20Serie LCL / LCL Series 21Serie LTL / LTL Series 22Serie LPLR / LPLR Series 23Serie LPL / LPL Series 24 - 25
Serie CL / CL SeriesSerie CL / CL SeriesSerie CL / 4BARRIERE PER ASCENSORI / LIGHT CURTAINS FOR ELEVATORS Pag.
Serie LN / LN SeriesSerie LN / LN SeriesSerie LN / 10-11FOTOCELLULE / PHOTOCELLS Pag.
Serie GN / GN SeriesSerie GN / GN SeriesSerie GN / 15SEGNALATORI ACUSTICI / ELECTRONIC ALARMS Pag.
Serie AL - ALA - ALB - AS / AL - ALA - ALB - AS SeriesSerie AL - ALA - ALB - AS / AL - ALA - ALB - AS SeriesSerie AL - ALA - ALB - AS / 16ALIMENTATORI DI EMERGENZA / EMERGENCY POWER SUPPLIES Pag.
Serie LD / LD Series Serie LD / LD Series Serie LD / 20ILLUMINAZIONE LED / LED LIGHTING Pag.
Indice Catalogo / Catalogue indexIndice Catalogo / Catalogue index
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
4
Serie CL / CL SeriesSerie CL / CL Series
BARRIERE PER ASCENSORI - SERIE CLLIGHT CURTAINS FOR ELEVATORS - CL SERIES
Dimensioni/Dimensions:
33
10
IP44
Versione 154 raggi 154 beam version
Versione 84 raggi84 beam version
Cortine di raggi/Beam patterns
• Extremely easy to install in new or existing lifts thanks to the versatile profile• Very easy alignment between TX and RX • Suitable for static and dynamic installations• High immunity against light and electromagnetic interferences• Diagnostic LEDs• Flexible cables• Time-out function with auto beam disabling of the obstructed
diode • Input voltage: from 18 to 30VDC / from 18V to 30VAC without
control unit• Optional 230V control unit with 5A relay inside
Relè 1A interno/1A relay insideUNI EN81/70
• Estrema semplicità di installazione su nuovi impianti o esistenti grazie alla versatile forma del trafilato• Ampia capacità di allineamento fra TX e RX • Adatta per funzionamento statico o dinamico• Altissima immunità a disturbi elettromagnetici e luminosi• Diagnostica a LED• Cavi per posa mobile • Sistema anti-vandalico con auto esclusione del raggio
ostruito• Alimentazione DC da 18V a 30V / AC da 18V a 30V senza
unità di controllo esterne• Alimentatore opzionale a 230V con relè interno da 5A
N° diodi/Diodes Q.ty
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONSN° raggi/
Beams Q.tyPortata/
Operating rangeAltezza barriera/
Light curtain height Area protetta/
Protected heightItem
061106
18 - 30V AC/DC(230V con
alimentatore opzionale/230V
with optional control unit)
Relè 1A/Relay 1A
3 mt.
Alimentazione/Supply voltage
Uscita/Output
18
8
16
24
32
40
061108
061109
061110
061103
061111
84
34
74
114
154
194
1856 mm
464 mm
928 mm
1392 mm
1856 mm
2320 mm
da 20 a 1818 mm
da 20 a 426 mm
da 20 a 890 mm
da 20 a 1354 mm
da 20 a 1818 mm
da 20 a 2282 mm
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
5
Serie EL / EL SeriesSerie EL / EL Series
BARRIERE PER ASCENSORI - SERIE ELLIGHT CURTAINS FOR ELEVATORS - EL SERIES
Dimensioni/Dimensions:
• Extremely easy to install in new or existing lifts • Very easy alignment between TX and RX • Suitable for static and dynamic installations• High immunity against light and electromagnetic interferences• Light curtain supplied with relay output control unit
IP44
Accessori/Accessories:
Alimentatori/Control units
Accessori di fissaggio Serie K/K Series fixing accessories
Alimentatori/Control units
Prolunghe/Extensions cable
UNI EN81/70
• Estrema semplicità di installazione su nuovi impianti o esistenti • Ampia capacità di allineamento fra TX e RX • Adatta per funzionamento statico o dinamico• Altissima immunità a disturbi elettromagnetici e luminosi• La barriera viene fornita con alimentatore esterno con uscita a relè
N° diodi/Diodes Q.ty
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONSN° raggi/
Beams Q.tyItem
EL774ENO
YES
NO
YES
Automasking Door nudging
17
32
17
32
EL874E
96
154
EL094
EL154
94
154
Portata/Operating range
Altezza barriera/Light curtain height
Area protetta/Protected height
12V DC24V AC/DC
230V AC
24V AC/DC230V AC
0 - 4 mt.
Alimentazione/Supply voltage
2000 mm da 25 a 1820 mm
Accessori di fissaggio Serie K/K Series fixing accessories K Series fixing accessories
X
Ø 3
Y
X = 28mm (EL094/EL154)25mm (EL774/EL874)
Y = 11mm (EL094/EL154)10mm (EL774/EL874)
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
6
Serie CLP / CLP SeriesSerie CLP / CLP Series
BARRIERE PER PIATTAFORME ELEVATRICI - SERIE CLPLIGHT CURTAINS FOR ELEVATING PLATFORMS - CLP SERIES
IP44IP44
Relè 1A interno/1A relay inside
Dimensioni/Dimensions:
33
10
Magnete/Magnet
DOMANDA DI BREVETTO DEPOSITATA IN ITALIA/
PATENT PENDING IN ITALY
* Uscita a transistor su richiesta/Transistor output on request
• The new magnetic fixing system makes the installation extremely easy and reduces the maintenance costs and man hours• Very easy alignment between TX and RX • High immunity against light and electromagnetic interferences• LED diagnostic • Input voltage: from 18 to 30VDC / from 18V to 30VAC without control unit• Optional 230V control unit with 5A relay inside
• Estrema semplicità di installazione e riduzione dei tempi di intervento grazie al nuovo sistema di fissaggio magnetico • Ampia capacità di allineamento fra TX e RX • Altissima immunità a disturbi elettromagnetici e luminosi• Diagnostica a LED• Alimentazione DC da 18V a 30V / AC da 18V a 30V senza unità di controllo esterne• Alimentatore opzionale a 230V con relè da 5A
N° diodi/Diodes Q.ty
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONSN° raggi/
Beams Q.tyPortata/
Operating rangeAltezza barriera/
Light curtain heightArea protetta/
Protected heightItem
18 - 30V AC/DC(230V con
alimentatore opzionale/
Optional 230V control unit)
Relè 1A/Relay 1A
061003
06100432
3 mt.
6 mt.154
2000 mm da 20mm a 1818mm
Alimentazione/Supply voltage
Uscita/Output
061005
06100618
3 mt.
6 mt.84
061009
06101021
6 mt.99
3 mt.
2339 mm061011
06101240
6 mt.194
3 mt.da 20mm
a 2282mm
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
7
FISSAGGIO MAGNETICO PER PIATTAFORME ELEVATRICIMAGNETIC FIXING SYSTEM FOR ELEVATING PLATFORMS
Il piastrino metallico può scorrere lungo la guida ed essere bloccato nella
posizione voluta per recuperare tolleranze sulle forature esistenti
Inserto magnetico Piastrino metallico con perno di fissaggio
DETTAGLI TECNICI/TECHNICAL SPECIFICATIONS
FISSAGGIO SU INOX FISSAGGIO SU FERRO
Perno di fissaggio
Parete acciaio inox
Banda mertallicaadesiva
Magnete barriera
Perno difissaggio
Parete ferro
Magnetebarriera
Boccola a espansione
Boccola a espansione
MICROSISTEMI has always been committed to fully meet its customers' needs. For this reason we have studied an innovative fixing system specially designed for light curtains’ installations in lifting platforms where the space for the sensors is limited and the screws are generally placed on the back and very hard to screw off.The light curtain’s profile is equipped with a magnetic plate on its full length.Light curtains are usually installed on an iron surface and thanks to the magnet which produces a constant traction on their length they result steadily tight.Two adjustable pins fixed on the existing holes fasten the light curtain in its right position and prevent it from the vertical sliding due to the acceleration and deceleration of the platform.In case of light curtain’s replacement two adjustable pins on the existing holes are a great advantage instead of five screws. This is true even if the screws would be easily attainable because the alignment of five holes is more difficult than the positioning of two. In case of light curtain’s installation on a stainless steel surface a special adhesive metallic plate will be applied on this latter exactly on the door detector’s magnetic plate.
DOMANDA DI BREVETTO DEPOSITATA IN ITALIA/
PATENT PENDING IN ITALY
Serie CLP / CLP SeriesSerie CLP / CLP Series
MICROSISTEMI da sempre attenta alle esigenze del cliente propone un innovativo sistema di fissaggio per barriere su piattaforme elevatrici dove lo spazio destinato ai sensori è molto ristretto e le viti sono generalmente arretrate e difficilmente svitabili.Il corpo della barriera è dotato di una una banda magnetica su tutta la sua lunghezza.Appoggiata su una superficie di ferro, la barriera, risulta stabilmente fissata tramite il magnete che determina una trazione costante su tutta la lunghezza.Due perni regolabili e fissati alla quota dei fori esistenti vincolano la barriera nella posizione stabilita impedendo l’eventuale scorrimento verticale causato da accelerazione e decellerazione della piattaforma. ln ogni caso, soprattutto in una sostituzione, 2 perni regolabili alla quota dei fori esistenti, anzichè 5 viti in posizione fissa, sono un grosso vantaggio anche qualora le viti fossero facilmente accessibili perchè, per le tolleranze, é evidentemente più difficile allineare 5 fori anzichè 2.In caso di montaggio della barriera su inox, una apposita bandella metallica adesiva viene applicata alla superficie inox in corrispondenza della banda magnetica della barriera stessa.
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
8
Serie K / K SeriesSerie K / K Series
ACCESSORI DI FISSAGGIO PER BARRIERE SERIE “EL” E “CL”FIXING ACCESSORIES FOR “EL” AND “CL” SERIES LIGHT CURTAINS
K-AN
K-SQ2
K-SF
Bracket to fix the light curtains on the door edge.
K-A-A- N
Staffa per fissaggio barriera al bordo porta.
K-AN1K-AN2
K-ST
K-SQ2
K-AN2
K-AN1
K-ST
K-AN2
K-SQ2
K-ST
K-AN2K-SQ2
K-AN
K-ST
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
9
Serie CC / CC SeriesSerie CC / CC Series
BARRIERE PER USO INDUSTRIALE - SERIE CCLIGHT CURTAINS FOR INDUSTRIAL USE - CC SERIES
Dimensioni/Dimensions:
• Stout aluminium black profile with IP54 degree of protection • Suitable for static and dynamic installations• High immunity against light and electromagnetic interferences• 1A relay output with NO/NC contact • Distance regulation switch on 4 range levels • Correct alignment display through the led bar • Wire synchronism by means of RS485 communication protocol • Connecting up to maximum 4 light curtains to our CTS safety unit
27
31
Accessori/Accessories:
Serie CTS - Centralina di sicurezza per barriere CCDIRETTIVA MACCHINE CAT. 2/
CTS Series - Safety unit for CC light curtainsMACHINERY DIRECTIVE LEVEL 2
IP44
LIGHT CURTAINS FOR INDUSTRIAL USE - CC SERIES
IP44
Protezione metallica opzionale Serie PRO/Optional PRO series metallic protection
Centralina di sicurezza per barriere CCDIRETTIVA MACCHINE CAT. 2/
CTS Series - Safety unit for CC light curtainsMACHINERY DIRECTIVE LEVEL 2
Protezione metallica opzionale Serie PRO/Optional PRO series metallic protection
CTS01 = 230V AC
• Robusto corpo in alluminio trafilato nero, protezione IP54 • Adatta per funzionamento statico o dinamico• Altissima immunità a disturbi elettromagnetici e luminosi• Uscita a relè 1A con contatto NO/NC • Dip di regolazione della distanza su 4 livelli di portata • Visualizzazione corretto allineamento mediante barra led • Sincronismo filare con protocollo di comunicazione RS485 • Possibilità di collegare fino a 4 barriere alla stessa centralina CTS
N° raggi/Beams Q.ty
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONSRisoluzione/ResolutionItem
Standard 5 mt.
(Max 50 mt. su richiesta/Max 50 mt. on request)
Cavi/Cables
8
12
16
20
24
16
CC08A
CC12A
CC16A
CC20A
CC24A
CC16B
100
24
32
40
48
CC24B
CC32B
CC40B
CC48B
50
Portata/Operating range
Altezza barriera/Barrier height
Area protetta/Protected height
17-30V DC(230V con
centralina di sicurezza opzionale/
Optional 230V safety unit)
0 - 8 mt.
Alimentazione/Supply voltage
1100 mm
1500 mm
1900 mm
2300 mm
2700 mm
1100 mm
1500 mm
1900 mm
2300 mm
2700 mm
da 25 a 725 mm
da 25 a 1125 mm
da 25 a 1525 mm
da 25 a 1925 mm
da 25 a 2325 mm
da 25 a 775 mm
da 25 a 1175 mm
da 25 a 1575 mm
da 25 a 1975 mm
da 25 a 2375 mm
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
10
Serie LN / LN SeriesSerie LN / LN Series
Unità master a microprocessore per sensori a infrarosso attivoMicroprocessor control units for active infrared sensors
• Best solution for double way-in cabins, elevating platforms, anti-theft entrance control system and safety doors. • Control units in 2 versions to run 4 or 6 interference free synchronized beams. High proofing against opto-electrical interferences.• Specifically designed for environments with particularly reflecting surfaces and all applications requiring accurate adjustment of the beams.• The microprocessor calculates the distance and optimizes the set-up of the beams. • Set up through micro-buttons and pertinent LED indications for the following functions: separate reaction time and sensibility adjustment for every single beam to optimize the operating on safety edges and against special reflections. (In case of continuous applications that need the same setting up continuously, the latter can be reproduced avoiding to repeat each time the same operation with remarkable economic advantages and the employed parameters can be modified – when required), AND function: relay operating by cutting out both beams simultaneously. OR function: relay operating by cutting out at least one beam, 1- 2 beams referring to the same relay. • Extractable terminal board and connectors placed outside the plastic box for power supply, relay and pre-wired sensor cables.• IP65 protection available on request.
Applicazioni/Applications:
Piattaforme elevatrici/Elevating platforms
Porte automatiche/Automatic doors
IP30
Microprocessor control units for active infrared sensorsUnità master a microprocessore per sensori a infrarosso attivoMicroprocessor control units for active infrared sensors
IP30
Microprocessor control units for active infrared sensorsVersione IP65 opzionale/IP65 version on request
Dimensioni/Dimensions:
88
104
Bussole anti-rapina/Anti-robbery doors
• Ideale per cabine con più accessi, piattaforme elevatrici, bussole anti-rapina e coste di sicurezza. • Centraline in 2 versioni per la gestione di 4 o 6 raggi sincronizzati, non interferibili, caratterizzate da alta immunità ai disturbi elettrici ed ottici. • Appositamente progettate per ambienti particolarmente riflettenti e in tutte le applicazioni che richiedono una accurata regolazione dei raggi. • Il microprocessore regola automaticamente i raggi per garantire un efficace intervento all’interuzione.• Settaggio tramite tastini e relativa indicazione a LED delle seguenti funzioni: regolazione della sensibilità e della soglia di intervento indipendente per ogni singolo raggio, funzione AND: attivazione relè mediante interruzione contemporanea di entrambi i raggi, funzione OR: attivazione relè mediante interruzione di almeno un raggio, 1-2 raggi indirizzati allo stesso relè. • Morsettiera e connettori estraibili, accessibili dall’esterno della scatola, per alimentazione, relè e sensori pre-cablati• Protezione IP65 opzionale.
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONS
PS2003 - PS2007 - PS2010In versione 5 - 8 mt.
con connettore / 5 - 8 mt. version with connector
Compatibilità sensori/Sensors compatibility
N° di raggi/Beams q.tyItem
LN1054.C 1 - 4
1 - 6LN1056.C
10-30V AC/DC Senza necessità di settaggio/
Setting not necessary
Alimentazione/Supply voltage
Portata/Operating range
0,1 - 6 mt.
Portata contatto/Output contact
5A - 30V DC /0,9A - 60V DC
Protetto da sovra-tensioniProtected against extra-tensions
Assorbimento/Consumption
100 mA
130 mA
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
11
Serie LN / LN SeriesSerie LN / LN Series
Unità master per sensori a infrarosso attivo serie PSControl units for active infrared sensors PS series
• Infrared control unit to run 1 - 2 synchronized, not interacting beams, featuring PLL circuit • Pre- arranged sensitivity setting or regulation trimmer for optimal use against reflections• Work frequency setting in order to avoid interaction in installations with more adjoining beams • Flat container that can be fixed with screws.The cover, attached to the base with a handy expansion interlocking mechanism, can be removed by simply pressing on the side • 12/24 Volt DC-AC +/- 15% adjustable supply voltage
Versioni disponibili/Avaiable versions:
Dimensioni/Dimensions:
88
104
Unità master per sensori a infrarosso attivo serie PSControl units for active infrared sensors PS series
IP30
Versioni speciali alimentazione 220V - 110V e 48V. Personalizzazioni a richiesta.Special version with 220V -110V and 48V power supply. Custom made versions on request.
• Centralina gestione 1 - 2 raggi infrarossi non interferibili, sincronizzati, con circuito PLL • Settaggio sensibilità prefissato oppure con trimmer di regolazione per impiego ottimale in presenza di riflessioni• Settaggio frequenza di lavoro per evitare interazioni nelle installazioni con più raggi attigui • Contenitore piatto fissabile mediante viti passanti. Il coperchio, agganciato alla base da un pratico incastro ad espansione, è asportabile con una semplice pressione laterale • Alimentazione settabile 12/24 Volt DC-AC +/- 15%
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONS
PS2003 - PS2007 - PS2010In versione 5 - 8 mt.
con o senza connettore / 5 - 8 mt. version with or without
connector
Compatibilità sensori/Sensors compatibility
N° di raggi/Beams q.tyItem
LN1111 1
1LN1011
12-24V AC/DC
Alimentazione/Supply voltage
Portata/Operating range
0,1 - 6 mt.
Assorbimento/Consumption
1 - 2LN1012
1 LN1051
1 - 2LN1052
Portata contatto/Output contact
1A - 24V DC
5A - 30V DC /0,9A - 60V DC
Protetto da sovra-tensioniProtected against extra-tensions
50 mA
LNXXXX .A Opzione connettori estraibili dall’esterno per cavi pre-cablati.Version with extractable connectors, accessible from the outside, for pre-wired cables.
LNXXXX .B
LNXXXX .C
LNXXXX .S
Opzione morsettiera estraibile accessibile dall’esterno.Version with extractable terminal board, accessible from the outside.
Opzione connettori estraibili per cavi sensori pre-cablati e morsettiera estraibile per alimentazione e relé.Version with extractable connectors, for pre-wired cables, extractable terminal board for power supply and relay.
Opzione contenitore IP65IP65 box version.
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
12
Serie PS / PS SeriesSerie PS / PS Series
Opto-sensori a infrarosso attivo (in abbinamento alle centraline LN)Active infrared opto-sensors (to match up with the LN control units)
Versioni standard disponibili/Standard versions available:
• Portata 6 m • Oggetto minimo rilevabile 15 mm • Angolo di apertura 5° • Per applicazioni in ascensori, porte automatiche, bussole anti rapina • Lunghezza cavi 5 m oppure 8 m • Opzione connettori pre-cablati
• Operating range: 6 m • Smallest detectable object: 15 mm • Opening angle: 5° • Suitable for lift doors, automatic doors, anti-theft entrance control systems• Cable length: 5 or 8 m • Pre-wired connectors on request.
IP65
Opto-sensori a infrarosso attivo (in abbinamento alle centraline LN)Active infrared opto-sensors (to match up with the LN control units)Opto-sensori a infrarosso attivo (in abbinamento alle centraline LN)Active infrared opto-sensors (to match up with the LN control units)
• Portata 6 m • Oggetto minimo rilevabile 15 mm • Angolo di apertura 5° • Per applicazioni in ascensori, porte automatiche, bussole ant• Lunghezza cavi 5 m oppure 8 m • Opzione connettori pre-cablati
• Operating range: 6 m • Smallest detectable object: 15 mm • Opening angle: 5° • Suitable for lift doors, automatic doors, anti-theft entrance systems• Cable length: 5 or 8 m • Pre-wired connectors on request.
Opto-sensori a infrarosso attivo (in abbinamento alle centraline LN)Active infrared opto-sensors (to match up with the LN control units)
IP65
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONCARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATION
FORO LAMIERASHEET HOLE
Ø13
11
2 20
PS2003• Fissaggio antivandalico con boccola ad espansione a 12 punti di tangenza, garanzia di tenuta ottimale con assoluta assenza di movimento anche con fori non perfettamente regolari. Esclusivo sistema anti-strappo del cavo che permette un facile inserimento del sensore, limitando al massimo l’ingombro.• Anti-theft clamp with 12-point tangency expansion bush. Perfect resistance without any moving even with not regular holes. Compact sized, exclusive cable anti- tear system allowing the sensor to be easily inserted.
SHEESHEET HT HT OLEØ13 2 20
FORO LAMIERASHEET HOLE
Ø11Ø
9,5
Ø 1
4,9
13 5
Versioni standard disponibili/Standard versions availableversions available:
FORO LAMIERASHEET HT HT OLE
Ø11
FORO LAMIERASHEET HOLE
Ø11
Ø 9
,5
Ø 1
4,9
17 1,7
PS2007• Corpo plastico alettato con innesto a pressione• Finned plastic body with pressure insert.
PS2010• Corpo plastico alettato con innesto a pressione• Lente incassata• Finned plastic body with pressure insert.• Recessed lens
PS20
03
.1.A.5.A Cavo 5 m senza terminazione.5 m cable without connector.Cavo 5 m con connettore pre-cablato. 5 m cable with pre-wired connector.Cavo 8 m senza terminazione.8 m cable without connector.Cavo 8 m con connettore pre-cablato. 8 m cable with pre-wired connector.
Cavo 8 m senza terminazione.8 m cable without connector.Cavo 8 m con connettore pre-cablato. 8 m cable with pre-wired connector.
Cavo 8 m senza terminazione.8 m cable without connector.Cavo 8 m con connettore pre-cablato. 8 m cable with pre-wired connector.
.1.A.5.B
.1.A.8.A
.1.A.8.B
PS20
07 .1.A.8.A
.1.A.8.B
PS20
10 .1.A.8.A
.1.A.8.B
PS20XX.1.A.X.XCodice prodotto/Product code:
1 32
1
2
3
Tipo sensore/Sensor typeLunghezza cavi/Cables lengthTerminazione cavo/Cable ending
PS2003 PS2007 PS2010
5 = 5mt. 8 = 8mt.
A = Senza connettore/Without connectorB = Con connettore/With connector
Altre lunghezze di cavi e connettori sono disponibili su richiesta/Other cables length and connectors are available on request
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
13
Serie KIT / KIT SeriesSerie KIT / KIT Series
Oltre ai singoli componenti presentati, potete scegliere gli abbinamenti standard proposti (LN+PS).The following standard combinations (LN+PS) are available in addition to the single items presented in the previous pages.
K - 1111LN 1111 + 1 x PS 2003.1.A.5.A
K - 1111.CLN 1111.C + 1 x PS 2003.1.A.5.B
K - 311LN 1051 + 1 x PS 2003.1.A.5.A
K - 311.CLN 1051.C + 1 x PS 2003.1.A.5.B
K - 411LN 1052 + 1 x PS 2003.1.A.5.A
K - 411.CLN 1052.C + 1 x PS 2003.1.A.5.B
K - 421LN 1052 + 2 x PS 2003.1.A.5.A
K - 421.CLN 1052.C + 2 x PS 2003.1.A.5.B
KIT PS2003 + LN
KIT STANDARD LN + PS / LN + PS STANDARD KITSTipo sensore/Sensor Type
Kit mono raggio/One beam kit
Kit doppio raggio/Two beam kit
K - 117LN 1011 + 1 x PS 2007.1.A.8.A
K - 217LN 1012 + 1 x PS 2007.1.A.8.A
K - 227LN 1012 + 2 x PS 2007.1.A.8.A
KIT PS2007 + LN
K - 116LN 1011 + 1 x PS 2010.1.A.8.A
K - 216LN 1012 + 1 x PS 2010.1.A.8.A
K - 226LN 1012 + 2 x PS 2010.1.A.8.A
KIT PS2010 + LN
K - 1111LN 1111 + 1 x PS 2003.1.A
K - 311N 1051 + 1 x PS 2003 1.A
KIT PS2003 + LN
Tipo sensore/Sensor Type
Kit mono raggio/One beam kit
LNN 1051 + 1 x PS 2003.1.A
K - 411N 1052 + 1 x PS 2003.1.A
LN
LN
KIT
K - 1161 + 1 x PS 2010.1.A
KIT PS2010 + LN
K - 116
KIT PS2010 + LN
K - 116LN 1011 + 1 x
PS2010 + LNK - 116
PS2010 + LN
PS2007 + LN K - 11707.1.A
K - 117LN 1011 + 1 x PS 200
PS2007 + LNPS2007 + LNPS2007 + LN
Versioni speciali e personalizzazioni disponibili su richiesta.Special and custom made versions available on request.
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
14
Serie SKE / SKE SeriesSerie SKE / SKE Series
FOTOCELLULE COMPATTE - SERIE SKECOMPACT PHOTOCELLS - SKE SERIES
Dimensioni/Dimensions:
Accessori/Accessories:
Protezione INOX K-FIL/K-FIL INOX protection
IP65
COMPACT PHOTOCELLS - SKE SERIESDimensioni/
IP65IP65
45
Ø1
1
Spessore 0,8 ÷ 3 mm Thickness 0,8 ÷ 3 mm
Ø 13Foro lamiera/ Sheet Hole
14
Accessori/AccessoriesAccessori/AccessoriesAccessori/ :
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy 14
Accessori/AccessoriesAccessori/AccessoriesAccessori/ :
Protezione INOX K-FIL/K-FIL INOX protection
Ghiera INOX K-PRO/K-PRO INOX ring-nut
+ ===
SKE - Sensori con elettronica incorporata con uscita a transistor limitata a max. 100 mA • Oggetto minimo rilevabile: 15 mm • Estrema semplicità di installazione • Fissaggio antivandalico con boccola ad espansione a 12 punti di tangenza, garanzia di ottimale tenuta con assoluta assenza di movimento anche con forature non perfettamente regolari • Protezione opzionale INOX filettata • Ghiera opzionale INOX per ulteriore protezione meccanica.
SKE - Sensor with incorporated electronics with transistor output with current limitation max. 100 mA• Smallest detectable object: 15 mm • Easy to install • Anti-theft clamp with 12 tangency points expansion bush. Excellent resistance without any moving even with not regular holes • Threaded INOX protection on request • Optional INOX ring-nut for further mechanical protection.
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONSPortata/
Operating rangeAngolo di apertura/
Opening angleLimitazione
uscita/Output limit
10-30V DC 5 mt.0,1 - 4 mt.
Alimentazione/Supply voltage
Lunghezza cavo/Cable lenght
5° 100 mA
Uscita transistor/Transistor outputItem
SKENA5 NPN-NO
NPN-NCSKENC5
PNP-NOSKEPA5
PNP-NCSKEPC5
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
15
SEGNALATORI ACUSTICI DI PRESENZA AL PIANOLIFT ARRIVAL GONGS
Dimensioni (mm) / Dimensions (mm):Mod. GN : 88x104xH30
Serie GN / GN SeriesSerie GN / GN Series
GN - 3
GN - 1
Suoneria elettronica con ingressi opto-isolati. Suono in dissolvenza. Settaggio A: 1 suono salita, 2 toni discesa. Settaggio B: 1-2-3 toni.
Lift arrival gong with opto-isolated activation control. Fading out sound.Setting A: 1 Tone UP, 2 Tone DOWN. Setting B: 1-2-3 Tones.
GN - 6
Suoneria elettronica 1-2-3 toni settabili. Suono in dissolvenza.1-2-3 adjustable tones electronic arrival gong. Fading out sound.
Suoneria elettronica 1 tono salita, 2 toni discesa con ingressoopto-isolato.
1 tone UP, 2 tones DOWN electronic lift arrival gong with opto-isolated activation control.
Dimensioni (mm) / Dimensions (mm):Mod. GN4 - GN5 : 88x104xH30Mod. GN4/I : 76x113xH35
SIRENE ELETTRONICHE BITONALI PER ASCENSORILIFT BITONAL ELECTRONIC ALARMS
GN - 5
GN - 4/I
GN - 4
item Sound level(dB at 1 m)
Frequency(Hz)
Power supply Description
6-24V DC
6-24V DC
5-20V DC
90 dB a 6V110 dB a 12V 2500 Allarme bitonale per montaggio
a parete / Wall bitonal lift alarm
90 dB a 6V110 dB a 12V 2500
Allarme bitonale da incasso perscatola mod. 503 / Embedded bitonal lift alarm to mod. 503 box
118 dB 2500
Allarme bitonale per montaggio a parete Elevata potenza sonora con qualsiasi voltaggio / Wall bitonal lift alarm high sound performances with any voltage
• Elevata potenza sonora• Indicazione luminosa mediante led
• High sound level• LED light warning
• Alimentazione 18-24 V ac; 8-40 V dc
• Supply voltage: 18-24 V ac; 8-40 V dc
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
16
ALIMENTATORI DI EMERGENZA CON BATTERIE NI-MHEMERGENCY POWER SUPPLY UNITS WITH NI-MH BATTERIES
SERIE AL/ALA/ALB• Uscita per luce di emergenza• Uscita per sirena esterna• Montaggio con viti o su barra DIN
AL/ALA/ALB SERIES:• Emergency light output• Outside alarm output• Screw or DIN rail mounting
Dimensioni (mm) / Dimensions (mm):
Mod. AL/AS : 130x75xH65Mod. ALB : 90x90xH65Mod. ALA 6V : 76x49xH110Mod. ALA 12V : 76x59xH110
ALA-0606 ALB-0606 6 0,6 2,2 YES
ALA-0613 ALB-0613 6 1,3 4,4 YES
ALA-0624 ALB-0624 6 2,4 8 YES
ALA-1206 ALB-1206 12 0,6 2,2 YES
ALA-1213 ALB-1213 12 1,3 4,4 YES
ALA-1224 ALB-1224 12 2,4 5 YES
- - 24 0,6 2,2 YES
- - 6 0,6 2,2 NO
- - 6 1,3 4,4 NO
- - 12 0,6 2,2 NO
- - 12 1,3 4,4 NO
I max from the battery
(A)Lightrelay
AL-0606
AL-0613
AL-0624
AL-1206
AL-1213
AL-1224
AL-2406
AL-0606/E
AL-0613/E
AL-1206/E
AL-1213/E
SERIE AL/ AL SERIES
V AhSERIE ALA/ ALA SERIES
SERIE ALB/ ALB SERIES
SERIE AS• Sirena incorporata• Uscita per luce di emergenza• Uscita per sirena esterna• Montaggio con viti o su barra DINAS SERIES:• Embedded alarm • Emergency light output• Outside alarm output• Screw or DIN rail mounting
6 0,6 2,2 YES
6 1,3 4,4 YES
12 0,6 2,2 YES
12 1,3 4,4 YES
AS-0606
AS-0613
AS-1206
AS-1213
SERIE AS/ AS SERIES
I max from the battery
(A)Lightrelay
V Ah
SERIE AL/ALA/ALB I max from
SERIE ALB SERIE ALA SERIE AL
Serie AL-ALA-ALB-AS /AL-ALA-ALB-AS SeriesSerie AL-ALA-ALB-AS /AL-ALA-ALB-AS Series
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
17
• Batterie incorporate Ni-Mh• Efficiente ricarica delle batterie per un completo accumulo di energia e una prolungata erogazione• Adatto per alimentazione scheda quadro, attivazione elettrovalvole su ascensori idraulici, sblocco elettro freno su ascensori a fune e apertura porte
• Ni-Mh batteries included• Efficient battery recharge for a long lasting supply and energy storage• Suitable for powering the panel control board, solenoid valve activation on hydraulic lifts, release of electrobrake on rope lifts, door opening
ALIMENTATORI DI EMERGENZA PER DISCESA AUTOMATICA AL PIANO O PER APPLICAZIONI SPECIALIEMERGENCY POWER SUPPLY UNITS FOR AUTOMATIC RESCUE OR SPECIAL APPLICATIONS
Dimensioni/Dimensions:130 x 75 x H65
Dimensioni/Dimensions:200 x 110 x H73Mod. 1300-2200 mAh
Efficiente ricarica delle batterie per un completo accumulo di energia e una prolungata erogazione attivazione elettrovalvole su ascensori idraulici, sblocco elettro freno su
EMERGENCY POWER SUPPLY UNITS FOR AUTOMATIC RESCUE OR SPECIAL APPLICATIONS
Dimensioni/Mod. 1300-2200 mAh
Item LightRelay
Supplyvoltage
DCOutput
(V)mAh
24
24-48
24-54
YESALR-1324
NOALR-1348
NOALR-1354
24 YESALR-2224
24-48 NOALR-2248
24-54 NO
Max supply output (W)
50
80
80
80
120
120ALR-2254
2200
1300
230V AC50-60Hz
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONS
Mod. 600 mAh
Serie ALR / ALR SeriesSerie ALR / ALR Series
ascensori a fune e apertura porte
• Ni-Mh batteries included• Efficient battery recharge for a long lasting supply and energy storage• Suitable for powering the panel control board, solenoid valve activation on hydraulic lifts, release of electrobrake on rope li door opening
• Batterie incorporate Ni-Mh• Efficiente ricarica delle batterie per un completo accumulo di energia e una prolungata erogazione• Adatto per alimentazione scheda quadro, attivazione elettrovalvole su ascensori idraulici, sblocco elettro freno su ascensori a fune e apertura porte
Mod. 600 mAh
Item LightRelay
Supplyvoltage
DCOutput
(V)mAh
24-48 NOALR-0648
Max supply output (W)
35600 110-230V AC
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONS
• Montaggio con viti o su barra DIN• Screw or DIN rail mounting
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
18
Serie ALP / ALP SeriesSerie ALP / ALP Series
ALIMENTATORI PER GESTIONE ILLUMINAZIONE PERMANENTE E DI EMERGENZA IN ABBINAMENTO AI CORPI ILLUMINANTI SERIE LPL E LPLR
POWER SUPPLY UNITS FOR PERMANENT AND EMERGENCY LIGHTING COMBINED WITH LPL AND LPLR LIGHTING FIXTURES
When ALP power supply units are combined with LPL and LPLR lighting fixtures can be set up to optimize the lighting in all working conditions of the lift either with power or in case of power failure.ALP power supplies are designed for a high quality lighting and above all are designed to reduce the operating costs of about 50%.In comparison to the current lift standards LPL and LPLR lighting fixtures are deliberately equipped with an excellent illumination capacity which can be reduced to improve absorption and efficiency. In particular, with led lighting not only absorption and efficiency thanks to the current reduction improve enormously, but also the lifetime and the luminous performances with the passing of time.
• VACANCY / BUSY activation by a separate control or by a presence detector inside • Sensor sensitivity adjustment• Adjusting lighting level with BUSY• Adjustable lighting level with VACANCY• Emergency lighting with the same luminous source• Control of a separate alarm • Ni- Mh batteries included• From 1 to 6 hours autonomy of operation depending on the luminosity level setting
Dimensioni/Dimensions 130 X 75 X H65
Alimentazione/Supply voltage 90 - 264V AC
Specifiche tecniche/Technical specification
In abbinamento ai corpi illuminanti serie LPL e LPLR, gli alimentatori serie ALP sono configurabili per ottimizzare l’illuminazione in tutte le condizione di funzionamento dell’ ascensore, sia in presenza che in assenza di rete, per una illuminazione di qualità con costi di esercizio inferiori al 50%.Rispetto ai normali standard dell’ascensore la capacità di illuminazione è volutamente abbondante e può essere diminuita a vantaggio dell’assorbimento e del rendimento, che nei LED migliora al diminuire della corrente, come migliorano la durata e il mantenimento delle caratteristiche luminose nel tempo.
• Attivazione di LIBERO/OCCUPATO con comando esterno oppure tramite rivelatore di presenza interno• Regolazione sensibilità sensore• Regolazione livello illuminazione con OCCUPATO• Regolazione livello illuminazione con LIBERO• Illuminazione di emergenza con stesso corpo illuminante• Gestione sirena esterna• Batterie Ni-Mh incluse• Autonomia da 1 a 6 ore dipendente dal livello di illuminazione impostato
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
19
Serie ALD / ALD SeriesSerie ALD / ALD Series
ALIMENTATORI DI EMERGENZA CON BATTERIE NI-MH PER LAMPADE A LED E COMBINATORI TELEFONICIEMERGENCY POWER SUPPLY UNITS WITH NI-MH BATTERIES FOR LED LAMPS AND EMERGENCY TELEPHONES
SERIE ALD
• Adatto per combinatori telefonici,lampade LED, sirene.• Miglioramento del livello di illuminazione in emergenza cheaumenta la tranquillità dei passeggeri• Razionalizzazione degli impianti: oltre alla illuminazionepermanente, una o più lampade illuminano in assenza di rete• Rapidità di installazione grazie a modularità e cavi pre-cablati• Montaggio con viti o su barra DIN
ALD SERIES• Suitable for emergency telephone systems, LED lamps and lift alarms• Improvement of the emergency lighting level to reassure the passengers• Plants’ rationalization: besides the permanent lighting one or more lamps are lighted in case of electrical breakdown.• Fast installation thanks to its modularity system and to its pre-wired cables• Screw or DIN rail mounting
Item AhN° massimo di
lampade in emergenza/Max n° emergency light
Durata in emergenza/ Duration in emergency
Imax Supply
voltage
ALD-706 0,6 �1 x LD1 or LD3 2
13.5V ± 20%
1A 90-260V
2 x LD1 or LD3 1
ALD-713 1,3
1 x LD1 or LD3 4
2 x LD1 or LD3 2
4 x LD1 or LD3 1
ALD722 2,2
1 x LD1 or LD3 8
2 x LD1 or LD3 4
4 x LD1 or LD3 2
Uscita/Output
SUPPLY90-260 V
ALD-7XX
+L
X LDCAB1 LDCAB2
LDCAB3
X USCITA SEMPRE ATTIVA/ CONTINUOUS ACTIVE OUTPUT
+ USCITA ATTIVA IN PRESENZA DI RETE/ ACTIVE OUTPUT WHEN POWER IS ON
L USCITA ATTIVA IN ASSENZA DI RETE/ACTIVE OUTPUT WHEN POWER IS OFF
L’ALIMENTATORE PUO’ ALIMENTARE MAX 6 LAMPADE LED SERIE LD1 OPPURE 5 LAMPADE LED SERIE LD3
THE POWER SUPPLY UNIT CAN FEED MAXIMUM 6 LD1 SERIES LED LIGHTS OR 5 LD3 SERIES LED LIGHTS
Dimensioni (mm) / Dimensions (mm):
Mod. ALD: 130x75xH65
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
20
LAMPADE LED MR16/ MR16 LED LAMPS
Serie LD / LD SeriesSerie LD / LD Series
Dimensioni/Dimensions:
:50
GU 5.3
55IP44
120°
Accessori/Accessories:
Portafaretti da incasso Serie PLD/PLD Series recessed lamp-holderPortafaretti da incasso Serie PLD/PLD Series recessed lamp-holderPLD Series recessed lamp-holder
Trasformatore/Transformer
Cablaggi Serie LDCAB/LDCAB Series Cables
Alimentatore per luce di emergenza Serie ALD/
ALD Series power supply unitfor emergency light
MR16 LED LAMPS
IP44
120°
IP44
• Diretta intercambiabilità con lampade alogene formato MR16 e connessione GU5,3 • Basso assorbimento e ottima resa luminosa • Basso calore irradiato nella cabina • Corpo alettato in alluminio: efficace raffreddamento a garanzia di lunga durata (40.000 ore stimate) • Risparmio nella manutenzione rispetto ad una analoga lampada alogena.
3W
4WCREE
(3 x 1,3W)
CREE (1 x 2,5W)
Marca led/Led brand
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONAssorbimento/
Power consumption Lumens Alimentazione/Supply voltage
Temperatura di Colore/Colour TemperatureItem
LD1-120PW
LD1-120NW
LD1-120WW
LD3-120PW
LD3-120NW
LD3-120WW
12V AC/DC
PW - Pure White (4700-7000k)
NW - Neutral White (4500-5000k)
WW - Warm White (2580-3600k)
PW - Pure White (4700-7000k)
NW - Neutral White (4500-5000k)
WW - Warm White (2580-3600k)
217
173
163
276
223
189
• Direct interchangeability with MR16 sized and GU5,3 jointed halogen lamps • Low absorption and excellent luminous flux• Low heat output in the cabin • Aluminium fiffed body: effective cooling to guarantee a long life (estimated 40.000 hours) • Low maintenance cost in comparison with a similar halogen lamp.
AVVERTENZA: Le lampade Serie LD cono intercambiabili con lampade alogene. Funzionano in DC oppure in AC con trasformatore elettrico classico, ma non possono essere alimentate con trasformatori elettronici.WARNING: LD Series lamps are interchangeable with halogen lamps. They work with DC or AC standard electric transformers but cannot be fed with electronic transformers.
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
21
PLAFONIERE LED - SERIE LCLLED CEILING LIGHTS - LCL SERIES
SISTEMA DI ILLUMINAZIONE ALL-IN-ONE CON SENSORE DI PRESENZA E BATTERIE PER LUCE DI EMERGENZA INCORPORATE NELLA LAMPADA
ALL-IN-ONE LIGHTING SYSTEM WITH PRESENCE SENSOR AND BATTERY PACK FOR EMERGENCY LIGHT INSIDE THE LAMP
Serie LCL / LCL SeriesSerie LCL / LCL Series
Dimensioni/Dimensions:
Ø 270
80
270
IP65
115°
• Lampada ideale per la ristrutturazione di impianti esistenti • Sensore di presenza incluso all’interno della plafoniera• Pacco batterie integrato all’interno della plafoniera per luce di emergenza• Basso assorbimento e ottima resa luminosa (800 +/- 100lm) con notevole risparmio energetico• Basso calore irradiato nella cabina • Corpo in alluminio: efficace raffreddamento a garanzia di lunga durata (40.000 ore stimate) e conseguente riduzione dell’attività di manutenzione rispetto ad una analoga lampada alogena.• Cover in PMMA opaco per una maggiore diffusione della luce• Estrema semplicità di montaggio• Viteria per il montaggio inclusa nella confezione.• Led ceiling light ideal for renovations or existing plants• Presence sensor included in the ceiling light• Battery pack integrated in the ceiling light for emergency light.• Low absorption and excellent luminous flux (800 +/- 100 lm) with significant energy savings.• Low heat output in the cabin.• Aluminium fitted body: effective cooling to guarantee a long life (40,000 hours estimated) and consequent low maintenance in compari son with a similar halogen lamp.• Opaque PMMA cover for greater light diffusion.• Extremely easy to assemble.• Screws for assembly included
Versioni disponibili/Available versions:
Item
LCL13
LCL07
Sensore di presenza/Presence sensor
SI
NO
Pacco batterie/Battery pack
SI
NO
Tempo di ricarica/Charge time
20 ore
-
Tempo di scarica/Discharge time
≥ 3 ore
-
Assorbimento/Power consumption
Alimentazione/Supply voltage
Lux(H=210)
Temperatura di Colore/Colour Temperature
NW - Neutral White (4000-4500k)20W 85-265V 70
PLAFONIERE LED - SERIE LCLLED CEILING LIGHTS - LCL SERIES
SISTEMA DI ILLUMINAZIONE ALL-IN-ONE CON SENSORE DI PRESENZA E BATTERIE PER LUCE DI EMERGENZA INCORPORATE NELLA LAMPADA
ALL-IN-ONE LIGHTING SYSTEM WITH PRESENCE SENSOR AND BATTERY PACK FOR EMERGENCY LIGHT INSIDE THE LAMP
Dimensioni/
80
IP65
115°
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
22
TUBI LED T8 - SERIE LTLT8 LED TUBES - LTL SERIES
• Easy installation • Excellent luminous flux with considerable energy saving
• Low heat in the cabin• Aluminium body and PMMA cover for a better distribution of light
• Suitable for replacement to traditional neon
IP50
130°
90°
90°
2 1
1
2
Schema di montaggio/Mounting diagram
Replace with LED starter
Remove starter
FluorescenttubeFluorescenttube
LEDtubeLEDtube
Remove fluorescent tube
Replace with LED tube
Serie LTL / LTL SeriesSerie LTL / LTL Series
IP50
• Estrema semplicità di installazione • Ottima resa luminosa con notevole risparmio
energetico• Basso calore irradiato in cabina • Corpo in alluminio e cover in PMMA opaco per
una migliore distribuzione della luce• Adatto per sostituzione a neon tradizionali
Lunghezza/Lenght
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONSAssorbimento/
Power consumptionQ.tà LED/LED Q.ty
Alimentazione/Supply voltage
Colore/Colour
180 -265V AC
60
72
110
PW - Pure WhiteNW - Neutral WhiteWW - Warm White
600 mm
900 mm
1200 mm
10W
12W
18W
G13
Tipo di attacco/Socket type
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
23
PANNELLO LED - SERIE LPLRLED PANELS - LPLR SERIES
Serie LPLR / LPLR SeriesSerie LPLR / LPLR Series
• Easy installation• Excellent luminous flux with considerable energy saving• Low heat in the cabin• Aluminium body and PMMA cover for a better distribution
of light• Screws for installation included
Alimentatori disponibili/Available power supply units:
Dimensioni/Dimensions:
13
Ø240
IP44
120°
Driver Led/Led driver: 90-264V AC
Serie ALP/ALP Series Alimentatore/Power supply unit:
90-264V ACLUCE PERMANENTE + LUCE DI
CORTESIA + LUCE DI EMERGENZA / PERMANENT LIGHT + COURTESY
LIGHT + EMERGENCY LIGHT
Serie ALP/Alimentatore
LUCE PERMANENTE + LUCE DI CORTESIA + LUCE DI EMERGENZA / PERMANENT LIGHT + COURTESY
LIGHT + EMERGENCY LIGHT
CORTESIA + LUCE DI EMERGENZA / PERMANENT LIGHT + COURTESY
18WSamsung (48 pcs)
Marca led/Led brand
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONAssorbimento/
Power consumptionLux
(H=220 cm)Alimentazione/Supply voltage
Colore/ColourItem
092701
092702
092703
90-264V AC
PW - Pure White
NW - Neutral White
WW - Warm White
85
75
65
• Estrema semplicità di installazione• Ottima resa luminosa con notevole risparmio energetico• Basso calore irradiato in cabina • Corpo in alluminio e cover in PMMA opaco per una migliore
distribuzione della luce• Viteria per il montaggio inclusi nella confezione
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
24
PANNELLI LED - SERIE LPLLED PANELS - LPL SERIES
11,5295
295
Dimensioni/Dimensions:
IP44
120°
Serie LPL / LPL SeriesSerie LPL / LPL Series
PANNELLI LED - SERIE LPLLED PANELS - LPL SERIES
IP44
120°
• Easy installation and possibility of surface mounting with optional support
• Excellent luminous flux with considerable energy saving• Low heat in the cabin• Aluminium body and PMMA cover for a better distribution
of light• Screws for installation included
Alimentatori disponibili/Available power supply units:
Driver Led/Led driver: 90-264V AC
Serie ALP/ALP Series Alimentatore/Power supply unit:
90-264V ACLUCE PERMANENTE + LUCE DI
CORTESIA + LUCE DI EMERGENZA / PERMANENT LIGHT + COURTESY
LIGHT + EMERGENCY LIGHT
Serie ALP/Alimentatore
LUCE PERMANENTE + LUCE DI CORTESIA + LUCE DI EMERGENZA / PERMANENT LIGHT + COURTESY
LIGHT + EMERGENCY LIGHT
Alimentatore
CORTESIA + LUCE DI EMERGENZA / PERMANENT LIGHT + COURTESY
• Estrema semplicità di installazione e possibilità di montaggio superficiale con supporto opzionale
• Ottima resa luminosa con notevole risparmio energetico• Basso calore irradiato in cabina • Corpo in alluminio e cover in PMMA opaco per una migliore
distribuzione della luce• Viteria per il montaggio inclusi nella confezione
22W
18WEpistar(84 pcs)
Samsung (44 pcs)
Marca led/Led brand
CARATTERISTICHE TECNICHE/TECHNICAL SPECIFICATIONAssorbimento/
Power consumptionLux
(H=220 cm)Alimentazione/Supply voltage
Colore/ColourItem
092210
092211
092212
092213
092214
092215
90-264V ACor
24V AC
PW - Pure White
NW - Neutral White
WW - Warm White
PW - Pure White
NW - Neutral White
WW - Warm White
200
175
145
145
130
100
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
25
Serie LPL / LPL SeriesSerie LPL / LPL Series
Accessori/Accessories:Accessori/Accessories:/Accessories:/
Schema di montaggio/Mounting diagram:
DIMA PER FORATURE/TEMPLATE FOR DRILLING
TETTO CABINA/CABIN ROOF
PANNELO LED/PANEL LIGHT
TETTO CABINA/CABIN ROOF
TETTO CABINA/CABIN ROOF
PANNELO LED/PANEL LIGHT
Dimensioni/Dimensions:
Cod.: 090220
• Accessorio in alluminio per il fissaggio superficiale del pannello • Viteria e dima per le forature incluse nella confezione• Aluminium frame for led panel surface mounting• Screws and drilling plate included
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
26
Note / NotesNote / Notes
Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
27
28 Microsistemi Industriale srl - Via Marecchiese, 484 - 47923 Rimini (RN) Italy tel. (+39) 0541 758332 - fax (+39) 0541 750942 www.microsistemi.biz • e-mail: [email protected]
CAT
ITU
K20
1509
2911
50