concrete cutting product catalogue 2019€¦ · metal cutting diamond blade metal cutting iron...
TRANSCRIPT
www.auskut.com.au / [email protected] / 1300-AUSKUT �2
4 / ANGLE GRINDERS We have a HUGE range of angle grinders to suit all your needs! See our best sellers here…
5 / CUTTING SHROUDS Cutting shrouds to provide a dust extraction port for your angle grinder.
6 / WALL CHASERS Make two parallel cuts simultaneously with these machines.
7 / ANGLE GRINDER BLADES Massive range of 4-9” blades suitable for use on angle grinders: Handyman, Universal, Raised Hub, Professional, Granite, Crack Chaser, Tuck Point, Fire & Rescue, Metal Cutting.
10 / TILE CUTTING Tile cutting is so easy with our diamond saws.
11 / TILE BLADES 4-14” tile blades suitable for use on angle grinders and tile saws: Professional, Thin Cutting, Special Mesh.
12 / BRICK / BLOCK SAW BLADES 14-20” blades to suit stationary brick & block saws.
13 / HANDHELD SAWS Power cutters / quick cut / demo saw machines.
14 / GUARDA Work hard & breathe easy with Guarda’s product range.
15 / WATER SUPPLY Stop the dust flying with our water supply units.
16 / HAND SAW BLADES HUGE range of 12-16” blades suitable for use on handsaws & brick saws: Trade, Professional, Fire & Rescue, Kombo, Wide Cutting.
18 / ROAD SAW Check out our great value floor saw machine.
19 / ROAD SAW BLADES 18-42” road saw blades: Professional, Kombo, Asphalt.
21 / RING SAW BLADES Pre-cut blade, ring saw blade and accessories.
22 / SOFT CUTTING Petrol powered machines for cutting green / fresh concrete.
23 / EARLY ENTRY BLADES Soft cutting blades to suit Husqvarna, Hoppt, Cardinal/Warrior and replacement skid plates.
Contact us for a price list today!
www.auskut.com.au / [email protected] / 1300-AUSKUT �3
CONCRETE CUTTING TOOLS
Free shipping for orders over $400 (*excludes machinery, liquids & adaptor plates)
ABOUT US AuSKut is a leading manufacturer and supplier of high quality diamond tools and machinery. Australian owned and family-run, we established on the Gold Coast in 2005 and now supply the concreting and construction industries throughout Australia. Our branches are currently located on the Gold Coast and Melbourne. Visit us in store, see one of our friendly stockists or call now on 1300-AUSKUT (287588) for Australia-wide delivery!
Contact us for a price list today!
www.auskut.com.au / [email protected] / 1300-AUSKUT �4
ANGLE GRINDERS
Metabo W24-230MVT 230mm angle grinder
9” (230mm) grinder with Marathon motor and patented dust protection for long service l i fe. Features deadman switch, tool-free adjustable guard, anti-vibration handle and rotating rear handle.
Motor: 2400W
No-Load Speed: 6600rpm
Disc Diameter: 230mm
Weight: 5.8kg
Metabo WEA17-125 125mm angle grinder
The power of a larger grinder and compactness of a small one. Features Marathon motor, TC ful l-wave electronics, M-quick tool-free disc change and S-automatic safety clutch.
Motor: 1700W
No-Load Speed: 11000rpm
Disc Diameter: 125mm
Weight: 2.5kg
AuSKut stocks an extensive range of quality angle grinders to suit all needs from the brands pictured below. Call us on 1300-AUSKUT or check out the website for our current range.
A sample of our best sellers…
Metabo WEV15-125INOX 125mm angle grinder
5” (125mm) robust, powerful grinder with h igh gear reduct ion and adjustable reduced speed for cool finish. Features Marathon motor, VTC full-wave electronics, M-quick tool-free disc change and S-automatic safety clutch.
Motor: 1550W
No-Load Speed: 2000-7600rpm
Disc Diameter: 125mm
Weight: 2.5kg
www.auskut.com.au / [email protected] / 1300-AUSKUT �5
CUTTING SHROUDS
METCED125+ Suits Metabo’s 125mm corded grinders. Extraction hood with plunge function and optimised flow channel for particularly low-dust cutting both indoors and out. Cutting depth adjustable without tools. Guide rails also available (sold separately). 35mm vacuum port.
AD5 Suits 125mm grinder with adjustable clamp sizes 40-44mm, 43-47mm and 48-51mm available. Hard plastic and metal cutting shroud. Adjustable cutting depth with locking wing nut (5-67mm). 38mm vacuum port
AD9 Suits 230mm grinder with adjustable clamp to suit sizes 83-90mm. Hard plastic and metal cutting shroud. Adjustable cutting depth with locking wing nut (5-67mm). 38mm vacuum port
Reduce exposure to dangerous debris, crystalline silica and dust particles that can cause health issues when cutting stone and concrete with our shrouds. Provides a dust port to attach dust extractors to angle grinders.
www.auskut.com.au / [email protected] / 1300-AUSKUT �6
WALL CHASERS
Metabo MFE65 9” wall chaser
Suitable for quick and clean cutting of wall chases with cutting depths up to 65mm. Features Metabo Marathon motor with patented dust protection and electronic overload protection for long service life.
Motor: 2400W
No-load Speed: 6500rpm
Blade Dia: 230mm
Groove Width: 3-41mm
Cutting Depth: 20-65mm
Weight: 9.8kg
Metabo MFE40 5” wall chaser
Suitable for quick and clean cutting of wall channels with cutting depths up to 40mm. Delivers maximum work progress by means of the powerful motor, constant speed and two-speed high-performance gear. Pushing cut for optimal view of the marking line.
Motor: 1900W
No-load Speed: 5000rpm
Blade Dia: 125mm
Groove Width: 9-35mm
Cutting Depth: 10-40mm
Weight: 4.6kg
Eibenstock EMF180 7” wall chaser
Suitable for milling of slots and ducts in concrete, sand-lime brick and brick. Slim design, work up to 15mm from the edge. Slot width adjustable in 1mm increments.
Eibenstock EMF125 5” wall chaser
Handy and lightweight, for cutting of slots and ducts in sand-lime brick and brick. Slim design, work up to 10mm from the edge. Slot width adjustable in 1mm increments.
Motor: 2300W
No-load Speed: 3,100rpm
Blade Dia: 180mm
Max Groove Width: 46mm
Max Cutting Depth: 60mm
Weight: 7.5kg
Motor: 1400W
Rated Speed: 10,000rpm
Blade Dia: 125mm
Max Groove Width: 30mm
Max Cutting Depth: 30mm
Weight: 3.5kg
www.auskut.com.au / [email protected] / 1300-AUSKUT �7
ANGLE GRINDER BLADES
HANDYMAN BLADES
General purpose segmented diamond blades for the budget conscious - great value for money! Suitable for wet or dry cutting of masonry, concrete, asphalt, brick, block and other building materials.
4” (105mm) HM4
4.5” (115mm) HM4.5
5” (125mm) HM5
7” (180mm) HM7
9” (230mm) HM9
UNIVERSAL BLADES
General purpose turbo diamond blades for use wet or dry. Suitable for cutting most materials.
4” (105mm) HPABW4
4.5” (115mm) HPABW4.5
5” (125mm) HPABW5
6” (150mm) HPABW6
7” (180mm) HPABW7
9” (230mm) HPABW9
RAISED HUB BLADES
General purpose turbo diamond blades for use wet or dry. Fast cutting for a smooth finish. Suitable for cutting concrete and masonry.
4” (105mm) RH4
5” (125mm) RH5
7” (180mm) RH7
9” (230mm) RH9
Blades suitable for use on angle grinders
www.auskut.com.au / [email protected] / 1300-AUSKUT �8
ANGLE GRINDER BLADES
PROFESSIONAL CUTTING BLADES
Professional laser welded segmented diamond blades. 10mm high segments for dry cutting of brick, block, pavers, concrete, masonry, etc.
4” (105mm) LTS4
5" (125mm) LTS5
6” (150mm) LTS6
7” (180mm) LTS7
8” (200mm) LTS8
9” (230mm) LTS9
GRANITE BLADES
Professional diamond blades suitable for dry cutting of granite, marble and hard stone. Features deep sided segments.
4” (105mm) GRAN4
4.5” (115mm) GRAN4.5
5” (125mm) GRAN5
7” (180mm) GRAN7
9” (230mm) GRAN9
CRACK CHASER BLADES
V-segment crack chaser blades are designed to widen and clear out cracks before repair materials are used. 9.5mm wide diamond segments.
4” (105mm) CCB4
5" (125mm) CCB5
7” (180mm) CCB7
www.auskut.com.au / [email protected] / 1300-AUSKUT �9
ANGLE GRINDER BLADES
FIRE & RESCUE BLADES
Multi-purpose vacuum brazed diamond blades for quick and effective cutting of a wide range of materials e.g. metal, masonry, concrete, plastic, etc.
5” (125mm) VBA125
9” (230mm) VBA230
METAL CUTTING DIAMOND BLADE
Metal cutting iron blade, vacuum brazed diamonds to steel core. Outlasts the life span of many abrasive blades without losing cutting depth.
5” (125mm) VSAB125
TUCK POINT BLADES
Diamond tuck point blades for the removal of mortar from masonry joints. Segments are 6.4mm wide.
4” (105mm) TUCK4
5" (125mm) TUCK5
7” (180mm) TUCK7
METAL CUTTING ABRASIVE BLADES
We stock a large range of metal cutting abrasive blades from 4” to 16”. Call us on 1300-AUSKUT or check out our website for current stock.
www.auskut.com.au / [email protected] / 1300-AUSKUT �10
TILE CUTTING
Eibenstock EDS125 Handy diamond saw
Suitable for wet and dry cutting of tiles, stone, pavers and concrete. Features mitre adjustment (stepless up to 45 degrees) and cutting depth adjustment (stepless up to 36mm) without the need for tools. Integrated water supply with flow regulator, roller guided plate and 35mm vacuum port. Optional guide rails available in 750 & 1500mm.
Motor: 1250W
No-load Speed: 12500rpm
Blade Dia: 125mm
Spindle: 22.2mm
Weight: 2.9kg
Eibenstock EDS181 200mm wet/dry saw
The most powerful in its class! Suitable for wet and dry cutting of tiles, stone, pavers and concrete. Features mitre adjustment (stepless up to 45 degrees) and cutting depth adjustment (stepless up to 63mm) without the need for tools. Integrated water supply, roller guided plate and 35mm vacuum port. Optional guide rail available.
Motor: 2300W
No-load Speed: 7500rpm
Blade Dia: 200mm
Spindle: 22.2mm
Weight: 7.7kg
www.auskut.com.au / [email protected] / 1300-AUSKUT �11
TILE BLADES
TILE BLADES
Continuous rim professional quality diamond tile blades for cutting porcelain, ceramic, terracotta and granite tiles. Produces a smooth, clean cut. Suitable for use wet or dry on angle grinders or tile saws.
4” (105mm) TC4
4.5” (115mm) TC4.5
5” (125mm) TC5
6” (150mm) TC6
7” (180mm) TC7
8” (200mm) TC8
9” (230mm) TC9
10” (250mm) TC10
12” (300mm) TC12
14” (350mm) TC14
THIN TILE BLADES
Premium quality thin turbo diamond tile blades designed for FAST cutting of hard tile materials. Suitable for dry cutting on angle grinders.
SPECIAL MESH TILE BLADES
Special mesh thin turbo diamond tile blades for FAST SMOOTH cutting of hard tile materials. Suitable for dry cutting on angle grinders.
4” (105mm) TT4
4.5” (115mm) TT4.5
5” (125mm) TT5
7” (180mm) TT7
9” (230mm) TT9
4” (105mm) TC4SP
4.5” (115mm) TC4.5SP
5” (125mm) TC5SP
Blades suitable for use on angle grinders and tile saws
www.auskut.com.au / [email protected] / 1300-AUSKUT �12
BRICK/BLOCK SAW BLADES
Eibenstock EST350.1 Cutting saw
Suitable for cutting bricks, block, stone, concrete, etc. Handy and flexible machine, precise and dust-free for dry cutting. Maximum cutting depth of 120mm and maximum cutting length of 250mm. Features adjustable quick clamping device, spindle lock, transportation lock in hinged position, angular stop stepless adjustable 0-45 degrees, starting current limiter and 35mm vacuum port.
Motor: 2400W
No Load Speed: 3,900rpm
Blade Dia: 350mm
Spindle: 25.4mm
Weight: 19kg
Blades suitable for use on stationary brick and block saws
BRICK/BLOCK SAW BLADES
Silent diamond saw blades for cutting brick, block, pavers, etc. Laser welded fast cutting 15mm segments for professional and fast cutting.
Size: Description: Code:
14” (350mm)General purpose, medium
Hard clay brick/AustralSoft brick/sandstone
S14GPS14HS14S
16” (400mm)EHWA general purposeEHWA hard clay brick
EHS16GPEHS16H
20” (510mm)Hard clay brick block sawGeneral purpose, medium
S20BHS20B
www.auskut.com.au / [email protected] / 1300-AUSKUT �13
HANDHELD SAWS
Hi Koki CM75EBP(HA) 14” handheld cutter
Powerful and tough, Hi Koki’s handheld cutter is powered by the new PureFire 2-stroke engine, producing low emissions and 30% less fuel consumption. Features c u t t i n g w h e e l w a t e r i n j e c t i o n , decompressor easy starting system, on-board tool holder, tool-less pre-filter and reduced vibrations.
Motor: 3.9kW 75cc
Blade Dia: 355mm
Cutting Depth: 125mm
Weight: 10.6kg
Eibenstock ETR350P 350mm concrete cutting saw
Eibenstock’s powerful wet/dry cutting system suitable for concrete, brick and natural stone. Features 35mm nozzle for direct connection to Eibenstock’s industrial vacuums, wide supporting rolls for exact guiding and adjustable handle and hood. Optional accessories include cutting depth limiter, guide rail and edge adaptor.
Motor: 2700W
Blade Dia: 350mm
Cutting Depth: 130mm
Weight: 12.5kg
www.auskut.com.au / [email protected] / 1300-AUSKUT �14
GUARDA
Guarda FTR095 Power Cutter
Connects to the Guarda Fume Tube for cutting indoors or in enclosed spaces where exhaust fumes can create a hazard. Suitable for general p u r p o s e c o n c r e t e c u t t i n g . Lightweight for ease of use.
Motor: 4kW 95cc
Blade Dia: 410mm
Cutting Depth: 150mm
Weight: 11.75kg
Guarda Fume Tube
Attaches to combustion powered concrete saws to help move harmful fumes away from the operator. Quick and easy to setup.
Guarda Edge Power Cutter
Features tri-vac technology - silica dust control via a combination of water delivered to the blade guard and vacuum suction; helps move harmful fumes via vacuum suction & hose attachment to the muffler; slurry control via vacuum suction to the blade guard. Fumes, dust & slurry are moved down the same hose. Suitable for general purpose concrete cutting.
Motor: 4kW 95cc
Blade Dia: 380mm
Cutting Depth: 150mm
Weight: 11.75kg
www.auskut.com.au / [email protected] / 1300-AUSKUT �15
WATER SUPPLY
GS1830AS 30L sprayer
Battery operated sprayer with 30L tank, suitable for use with water and water-based products. 2-speed operation. Includes 1 x battery and charger. Spare bat ter ies so ld separately. Standard hose fitting can be installed on request.
Makinex H2G2 Hose 2 Go
A constant pressure water supply unit, ideal as a dust suppression tool and portable water supply. Provides a constant water flow without the use of a pump, battery or electronics. Perfect for suppressing dust when cutting, core drilling and grinding concrete. Pressurised sprayer with 7 settings. Fills in 40 seconds from average spigot.
Battery: 18V 2.2Ah Sanyo li-ion
Liquid Flow: 3.5L/min
Weight: 9.5kg
Dimensions: 460x330x850mm
Tank Capacity: 13.8L
Output Pressure: 9psi
Weight: 5.7kg dry, 19.5kg full
Dimensions: 325x144x800mm
Battery: 18V 2.2Ah Sanyo li-ion
Liquid Flow: 1.8L/min
Weight: 3.3kg
Dimensions: 340x205x560mm
GS18AS 10L backpack sprayer
Battery operated backpack sprayer with 10L tank, suitable for use with water and water-based products. 2-speed operation. Includes 1 x battery and charger. Spare batteries sold separately.
www.auskut.com.au / [email protected] / 1300-AUSKUT �16
HAND SAW BLADES
TRADE BLADES
General purpose diamond blades for wet cutting. Suitable for cutting most materials.
Size: Description: Code:
14” (350mm)Universal turbo
12mm segmentsRaised hub
HPABW14SP14YRH14
16” (400mm)12mm segments
Raised hubSP16YRH16
Blades suitable for use on quick cut saws (hand saws) and brick saws
PROFESSIONAL BLADES
Professional cutting diamond blades with laser welded segments.
Size: Description: Code:
12” (305mm) 10mm segments SP12
14” (350mm)
12mm segments RED DEVIL12mm segments RED DEVIL
for Stihl saws10mm segments
10mm segments for asphalt/green concrete
10mm segments for same day cutting (early entry)
RD14RD14S
.SP14
SP14A .
SP14E .
15” (380mm) 14mm segments RED DEVIL for Guarda Edge Saw RD15
16” (415mm)
14mm segments RED DEVIL14mm segments RED DEVIL
for Stihl saws 14mm very soft segments for
use on hydraulic/high frequency saws
12mm segments EHWA (416mm)
12mm segments for asphalt/green concrete
12mm segments for same day cutting (early entry)
RD16RD16S
.RD16HF
.
.EH16
SP16A .
SP16E .
BEST SELLERS
www.auskut.com.au / [email protected] / 1300-AUSKUT �17
HAND SAW BLADES
KOMBO BLADES
Perfect for professional and hire use, a great all-round blade suitable for cutting concrete, brick and asphalt. Laser welded segmented blades with 10mm diamond segments.
FIRE & RESCUE BLADE
Multi-purpose vacuum brazed diamond blade for quick and effective cutting of a wide range of materials e.g. metal, masonry, concrete, plastic, etc.
16” (400mm) RES16
14” (350mm) AH63014
16” (410mm) AH63016
WIDE BLADES
Professional segmented diamond blades for where a wider cut is needed.
Size: Description: Code:
12” (300mm) 10mm wide WB12
14” (350mm)6.4mm wide10mm wide
WB14WB14W
16” (415mm)6.4mm wide10mm wide
WB16WB16W
Have a Stihl branded quick cut saw? We can help! Our brass reducers 25.4mm-20mm allow you to use our 12”, 14” & 16” blades on your
machine.
BEST SELLERS
www.auskut.com.au / [email protected] / 1300-AUSKUT �18
ROAD SAW
RS20 20” road saw
Walk-behind concrete road saw with 20” blade capacity, suitable for cutting/grooving concrete and asphalt. Adjustable cutting depth by handle rotation up to 190mm. Features adjustable handle and 25L water tank.
Motor: Honda GX390U 13HP
Speed: 2800rpm
Blade Dia: 500mm
Spindle: 25.4mm
Weight: 131kg
Dimensions: 1150x570x1030mm
AMAZING VALUE!!!
www.auskut.com.au / [email protected] / 1300-AUSKUT �19
ROAD SAW BLADES
Blades suitable for use on road saws
PROFESSIONAL BLADES
Professional cutting diamond blades with laser welded segments for use on road saws. Suitable for cutting most materials.
Size: Description: Code:
18” (450mm)
12mm segs 25-42HP for medium reinforced concrete
12mm segs 42-65HP for medium/hard reinforced
concrete/exposed aggregate12mm segs for medium/hard
reinforced concrete LOW 25-35HP
SP18K1
SP18K3
SP18L
20” (510mm)
12mm segs for medium reinforced concrete
12mm segs EHWA for medium/hard reinforced concrete
12mm segs EHWA for fast cutting
12mm segs EHWA for medium/hard reinforced concrete LOW
15-35HP14mm segs for hard concrete14mm segs for hard concrete
LOW 15-35HP
SP20KAM
EH20
EH20FC
EH20L
RSB20-ULTRARSB20L-ULTRA
22” (560mm) 14mm segs for hard concrete RSB22-ULTRA
24” (610mm) 14mm segs for hard concrete RSB24-ULTRA
26” (660mm)
12mm segs for medium reinforced concrete LOW
15-35HP14mm segs for hard concrete
SP26K3L
RSB26-ULTRA
30” (760mm) 14mm segs for hard concrete RSB30-ULTRA
36” (910mm) 14mm segs for hard concrete RSB36-ULTRA
42” (1040mm) 14mm segs for hard concrete RSB42-ULTRA
www.auskut.com.au / [email protected] / 1300-AUSKUT �20
ROAD SAW BLADES
ASPHALT BLADES
Professional diamond blades with laser welded segments for the cutting of asphalt, green or early entry concrete.
Size: Description: Code:
18” (450mm)12mm segments12mm segments
LOW HP 15-35HP
ASH18
ASH18L
20” (510mm)12mm segments12mm segments
LOW HP 15-35HP
ASH20
ASH20L
24” (610mm) 12mm segments ASH24
26” (660mm) 12mm segments ASH26
30” (760mm) 12mm segments ASH30
36” (910mm) 12mm segments ASH36
KOMBO BLADES
Perfect for professional and hire use, a great all-round blade suitable for cutting concrete or asphalt. Laser welded segmented blades with 10mm diamond segments.
18” (450mm) AH63018
20” (510mm) AH63020
www.auskut.com.au / [email protected] / 1300-AUSKUT �21
RING SAW BLADES
PRE-CUT BLADE PC16
16” (415mm) professional blade with 12mm laser welded fast-cutting segments. Suitable for cutting medium to extra hard reinforced concrete.
RING SAW BLADE RSB
365mm “Red Devil” premium diamond ring saw blade for use with ring saws. Cut concrete and other materials deeper than regular diamond blades. 4mm wide segments. Made to Australian professional standards. Comes with 1 x drive wheel.
RING SAW BLADE ACCESSORIES
Accessories for use with ring saws.
Drive wheel RSBW
Husqvarna guide/engagement roller H506352005
Husqvarna support roller H506352103
BEST SELLER!
www.auskut.com.au / [email protected] / 1300-AUSKUT �22
SOFT CUTTING
Hoppt HSCC6.0 Soft concrete cutter
Allows cuts to be made while the concrete is still green (early entry). The cutter can be used as soon as the concrete can support the weight of the machine and user without leaving any marks to the surface (usually within 1-2hrs of finishing). Features robust frame construction, low noise blade housing, easy access to blade shaft spanners and folding handle for easy transportation.
Motor: Robin EX13 4 stroke petrol 4.3kW
Blade Dia: 150mm
Cutting Width: 2.4mm
Max Cutting Depth: 25mm
Weight: 35kg
Dimensions: 1125x490x947mm
Husqvarna HX150 Soff-Cut saw
Enables concrete to be cut within the first one or two hours of finishing and before final set. Minimises the risk of random cracking and simplifies the working process, compared to conventional sawing. Feathers high-strength single piece frame, dust extraction port and low-noise blade enclosure, folding handle and retractable front guide system.
Motor: Robin EX13 4 stroke petrol 4.3hp
Blade Dia: 150mm
Cutting Width: 2.4mm
Max Cutting Depth: 30mm
Weight: 40kg
Dimensions: 1727x480x850mm
www.auskut.com.au / [email protected] / 1300-AUSKUT �23
EARLY ENTRY BLADES
TO SUIT HUSQVARNA/HOPPT
Professional diamond blades designed for cutting new or green concrete. Suitable for use on the Husqvarna X150 Soff-Cut Saw and Hoppt HSCC150 Soft Concrete Cutter.
1000 Series (PURPLE) = same day cutting 3000 Series (RED) = next day cutting
Size: Description: Code:
6” (150mm)
2.4mm wide PURPLE6.4mm wide PURPLE
2.4mm wide RED6.4mm wide RED
RED DEVIL
SC6PSC6PWSC6R
SC6RWSC6RD
8” (200mm)2.4mm wide PURPLE
2.4mm wide REDSC8PSC8R
10” (250mm)2.6mm wide PURPLE
2.6mm wide REDSC10PSC10R
12” (300mm)3.2mm wide PURPLE
3.2mm wide REDSC12PSC12R
13” (340mm)3.2mm wide PURPLE
3.2mm wide REDSC13PSC13R
14” (350mm)3.2mm wide PURPLE
3.2mm wide REDSC14PSC14R
TO SUIT CARDINAL/WARRIOR
Professional diamond blades designed for cutting new or green concrete. Suitable for use on Cardinal/Warrior early entry saws.
Size: Description: Code:
6.5” (165mm)2.4mm wide PURPLE
2.4mm wide REDSC6SBSC6MB
SKID PLATES
Replacement skid plates suitable for the Husqvarna X150 Soff-Cut Saw and Hoppt HSCC150 Soft Concrete Cutter.
Description: Code:
6” & 8” stainless steel SP68
6” & 8” aluminium with stainless plate SP68K
12” & 14” stainless steel SP124
Husqvarna 6” Soff-Cut blade PURPLE (ultra-hard materials) & skid plate
packageHXL6-1000
Husqvarna 6” Soff-Cut blade SILVER (hard materials) & skid plate package HXL6-1000 ND
Husqvarna 6" Soff-Cut blade RED (medium to hard materials) & skid plate
packageHXL6-3000
MELBOURNE Unit 2, 237 Princes Hwy, Hallam VIC 3803
Phone: (03) 9703 2561
GOLD COAST Unit 2, 94 Spencer Rd, Nerang QLD 4211
Phone: (07) 5500 4715
CONCRETE CUTTING PRODUCT
CATALOGUE 2019
Contact us for a price list today!
(c) June 2019