cone and plate viscometer - eurotom · 2019. 8. 23. · 290 byk-gardner gmbh, lausitzer str. 8,...
TRANSCRIPT
-
290 BYK-Gardner GmbH, Lausitzer Str. 8, 82538 Geretsried, Tel. +49-8171-3493-0 • BYK-Gardner USA, Phone 800-343-7721 • www.byk.com
Cone and Plate ViscometerThe versatility of the CAP 1000+ and CAP 2000+ makes these instruments a practical tool for any QC or R&D lab requiring quick and easy testing of materials, regardless of application, at high shear rates.
■ Provides for viscosity measurements at high shear rates■ LCD display of viscosity in Poise or Pascal-seconds■ Uses less than 2 ml of sample to avoid excess cleaning and
material costs■ Automatic viscosity range calibration and cone gap positio-
ning make the viscometer easy to use■ Set the viscometer to take a reading at different timed
intervals to ensure accuracy of results with thixotropic fluids
CAP 1000+■ Two available speeds to comply with all paint industry
standards worldwide (750 and 900 rpms), optional speed of 400 rpm upon request.
CAP 2000+■ Variable speed instrument with a speed range of 5 to 1,000
rpm (1 rpm increments) that allows for varying shear rates from 10 to 13,300 sec-1
■ Bi-directional RS-232 interface that allows for PC control with the optional CAPCALC 32 software
Comes complete with:Cone & Plate Viscometer1 cone – please specifyOperation manual
Note: Specify cone number when ordering. Will need to order the appropriate viscosity oil to calibrate the CAP viscometer.
StandardsASTM D 4287ISO 2884BS 3900
Timed Readings Digital timer with continuous running override; range 15 to 99 seconds
Temperature Control Increments of 0.1 °CPrinter Interface parallel centronicDimension 26 x 18 x 19 inShipping Weight 20 kg (46 lbs)
Ordering Information Technical SpecificationsCat. No. Description Temperature
Range Viscosity Poise Speeds
rpm Accuracy Shear Rate
sec-1 Voltage RS-232
Interface7552 CAP 1000+ L, 115V 5 - 75 °C 0.25 - 100 750 or 900 ± 2 % of
full scale up to
13,300 115V/60Hz
7553 CAP 1000+ L, 230V 5 - 75 °C 0.25 - 100 750 or 900 ± 2 % offull scale
up to13,300
230V/50Hz
7557 CAP 1000+ H, 115V 50 - 235 °C 0.25 - 100 750 or 900 ± 2 % offull scale
up to13,300
115V/60Hz
7558 CAP 1000+ H, 230V 50 - 235 °C 0.25 - 100 750 or 900 ± 2 % offull scale
up to13,300
230V/50Hz
7550 CAP 2000+ L, 115V 5 - 75 °C 0.2 - 15,000 5 - 1,000 ± 2 % offull scale
10 -13,300
115V/60Hz X
7551 CAP 2000+ L, 230V 5 - 75 °C 0.2 - 15,000 5 - 1,000 ± 2 % offull scale
10 -13,300
230V/50Hz X
7555 CAP 2000+ H, 115V 50 - 235 °C 0.2 - 15,000 5 - 1,000 ± 2 % offull scale
10 -13,300
115V/60Hz X
7556 CAP 2000+ H, 230V 50 - 235 °C 0.2 - 15,000 5 - 1,000 ± 2 % offull scale
10 -13,300
230V/50Hz X
-
291
Appearance Color
Physical PropertiesTechnical Service
BYK-Gardner GmbH, Lausitzer Str. 8, 82538 Geretsried, Tel. +49-8171-3493-0 • BYK-Gardner USA, Phone 800-343-7721 • www.byk.com
IndexViscosity
Ordering Information Technical SpecificationsCat. No. Description Temperature
Range Viscosity Poise Speeds
rpm Accuracy Shear Rate
sec-1* Voltage RS-232
Interface7590 1/23 CAP 1000+ L, 115V 5 - 75 °C 0.22 - 2.20 100 ± 2 % of
full scale 500 115V/60Hz
7591 1/23 CAP 1000+ L, 230V 5 - 75 °C 0.22 - 2.20 100 ± 2 % offull scale
500 230V/50Hz
7595 1/23 CAP 2000+ L, 115V 5 - 75 °C 0.2 - 44.0 5 - 1,000 ± 2 % offull scale
25 - 5000 115V/60Hz X
7596 1/23 CAP 2000+ L, 230V 5 - 75 °C 0.2 - 44.0 5 - 1,000 ± 2 % offull scale
25 - 5000 230V/50Hz X
**Note:Maximum speed recommended with this spindle is 400 rpm. The viscosity range indicated is for operation at 400 rpmNote: 1 Poise = 100 cP; 1 cP = 1 mPa*s
Spindles for Cone and Plate Viscometers
1/23 CAP VersionCone and Plate ViscometerThe 1/23 CAPs are for lower shear applications such as auto- motive clear coats and base coats. Most methods are single point pass/fail criteria using No. 10 spindle at 100 rpm; a shear rate of 500 1/sec and measurement range from 22 – 220 cP is achieved.There are two instruments available:
■ 1000+L version with a fixed speed of 100 rpms■ 2000+L version with a speed range from 5 – 1000 rpms■ The multiple speed selection provides more flexibility to
modify test procedures.
Comes complete with:
1/23 Cone & Plate viscometer No. 10 spindle Operation manual
*Note: with the No. 10 spindle
StandardsASTM D 7395ISO 2884, 3900
Ordering Information AccessoriesCat. No. Description Cap 1000+ 750rpm Cap 1000+ 900rpm Cap 2000+7531 CAP Spindle No. 1 0.25 - 2.5 poise 0.2 - 2 poise 0.2 - 375 poise7532 CAP Spindle No. 2 0.5 - 5 poise 0.4 - 4 poise 0.4 - 750 poise7533 CAP Spindle No. 3 1 - 10 poise 0.8 - 8 poise 0.8 - 1500 poise7534 CAP Spindle No. 4 2 - 20 poise 1 - 16 poise 1 - 3000 poise7535 CAP Spindle No. 5 4 - 40 poise 3 - 33 poise 3 - 6000 poise7536 CAP Spindle No. 6 10 - 100 poise 8 - 83 poise 8 - 15000 poise7560 CAP Spindle No. 7 N/A N/A 0.78 - 625 poise**7561 CAP Spindle No. 8 N/A N/A 3.13 - 2500 poise**7562 CAP Spindle No. 9 N/A N/A 12.5 - 10000 poise**7563 CAP Spindle No. 10 N/A N/A 1.0 - 1000 poise**
-
292 BYK-Gardner GmbH, Lausitzer Str. 8, 82538 Geretsried, Tel. +49-8171-3493-0 • BYK-Gardner USA, Phone 800-343-7721 • www.byk.com
Software for Cone and Plate Viscometers
CAPCALC 32Software for CAP 2000+Turn your CAP2000+ Viscometer into a sensitive, accurate rheo-meter. When advanced sample analysis is required, CAPCALC can control the viscometer from any PC to provide automatic data capture and graphical display to facilitate analysis of test samples.
■ Automates data collection■ Eliminates operator error when recording data■ Provides instantaneous viscosity flow curves (rheograms)
on easy-to-read graphs■ Creates a permanent record of each test■ Records up to 1000 data points per test■ Comparison data sets can be manually entered■ Saved data in Brookfield (text), Lotus 1-2-3, or Excel®■ Up to 6 data sets may be plotted simultaneously■ 12 Plot Types: – % FSR vs. RPM, Shear Rate, Time, Temperature – Viscosity vs. RPM, Shear Rate, Time, Temperature – Shear Stress vs. RPM, Shear Rate, Time, Temperature■ Yield Stress Calculations (Bingham Plastic, Casson, Chocolate
Casson), Power Law Consistency Index Calculations, Paste Analysis
■ On-line help system■ Data collection is provided via a powerful “scripting”
language for creating test programs
Comes complete with: CD-ROM Connecting cable Operating manual
Ordering Information Technical SpecificationsCat. No. Description Computer Requirements7524 CAPCALC 32 Software 500 mHz processor, MS-Windows, 2000, XP, Vista, 7, 8, 10, RS-232 port, 256 MB
RAM, 800 x 600 Resolution display, One RS-232 Port 800x600 resolution display
-
277
Appearance Color
Physical PropertiesTechnical Service
BYK-Gardner GmbH, Lausitzer Str. 8, 82538 Geretsried, Tel. +49-8171-3493-0 • BYK-Gardner USA, Phone 800-343-7721 • www.byk.com
Index
Note:Important information about these viscosity standards:– For practical purpose, these oils are Newtonian liquids– Standard bottle size is 1 pt. (470 ml).
Data Certified at 25°C ( 77°F )
Zahn and Ford Flow Cups
Certified Standard OilsBYK-Gardner offers a comprehensive line of certified standard viscosity oils. These oils are used to confirm the drain time of the flow cups are within specification.
Comes complete with:Viscosity oilCertificate of Analysis
Viscosity Standard GuideThe following table recommends the Viscosity Standard Oil for the DIN, ISO, Ford, and Zahn cups. The Test Certificate has the flow time values for the listed cups. For example, the Standard C100 test certificate has flow rate times for the ISO 6 mm cup, DIN 4 mm cup, Zahn #3 cup, Zahn #4 cup, and Ford #4 cup.
ISO Cup DIN Cup Zahn Cup Ford CupStandard C10 3 mm 1 1Standard C20 3 mm 1 & 2 2Standard C35 4 mm 2 2 & 3Standard C60 4 mm 4 mm 2 3 & 4Standard C100 6 mm 4 mm 3 & 4 4Standard C200 6 mm 4 mm 3, 4, & 5 5Standard C350 4 & 5 5Standard C600 5
Ordering Information Technical SpecificationsCat. No. Description Viscosity
Standard Kinematic
Viscosity Zahn Cup
No. Zahn Cup
Drain Time Ford Cup
No. Ford Cup
Drain Time4000 Viscosity Standard C10 C10 17 cST 1 45 sec 1 70 sec4001 Viscosity Standard C20 C20 34 cST 1 60 sec 2 42 sec4002 Viscosity Standard C35 C35 66 cST 2 33 sec 2 / 3 64 / 35 sec4003 Viscosity Standard C60 C60 120 cST 2 48 sec 3 / 4 58 / 36 sec4004 Viscosity Standard C100 C100 230 cST 3 / 4 27 / 21 sec 4 64 sec4005 Viscosity Standard C200 C200 460 cST 3 / 4 47 / 36 sec 5 40 sec4006 Viscosity Standard C350 C350 850 cST 4 / 5 62 / 37 sec 5 70 sec4015 Viscosity Standard C600 C600 1,600 cST 5 70 sec
Viscosity