Configuring a PC

Installing the Mother board

To Install the Mother board, fit it into the computer casing. You will then need to Insert 24 pin ATX power connector.

Inserting the CPU

To Install the CPU Open the CPU socket on the other board, slip your CPU into the socket then lock the CPU in place.

Inserting the CPU Heat Sync

To Insert the heat sync, place the Heat sync into its appropriate place, then screw it into the mother board.

Inserting the RAM

To Install the Ram, slot the Cards into the DIMM memory Slots.

Installing the HDD

To install the HDD plug in the SATA Cable connect it to the mother board, and the 8pin cable that connect it to the PSU. After this screw it into the HDD casing unit.

Installing the GPU

To install the GPU, fit it into the casing, after that plug the PCI slot. You also need to the plug the 8 pin cable from the PCU into the GPU.