content of introduction to performance … · caterpillar performance handbook a publication by...

© 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

800.437.4228www.hawthornecat.com

Caterpillar® Performance

Handbook Edition 44

CONTENT OF INTRODUCTION

TO PERFORMANCE

HANDBOOK

Edition 44 1

ARTICULATED TRUCKS 1

BACKHOE LOADERS 2

DRILLS 3

ENGINES 4

FOREST PRODUCTS 5

HIGHWALL MINING SYSTEM 6

HYDRAULIC EXCAVATORS– Front Shovels • Hydraulic Excavators • Material Handling Arrangements 7

HYDROMECHANICAL WORK TOOLS 8

MATERIAL HANDLERS 9

MINING & OFF-HIGHWAY TRUCKS 10

MOTOR GRADERS 11

ON-HIGHWAY TRUCKS 12

PAVING PRODUCTS 13

PIPELAYERS 14

CONTENTSPage

Preface . . . . . . . . . . . . . . . . . . . . . . . 4Environment and Sustainability . . . 4Operator and Machine Protection . . . . . . . . . . . 5 Operator Training . . . . . . . . . . 5 Machine Modifications . . . . . . 7 Equipment Options . . . . . . . . . 7 Machine Protection . . . . . . . . . 7 Fire Prevention. . . . . . . . . . . . . 7 Safety Regulations . . . . . . . . . . 8 Sound Suppression . . . . . . . . . 8 Replacement Parts Warning . . 8Nomenclature . . . . . . . . . . . . . . . . . 9

SKID STEER LOADERS ● MULTI TERRAIN LOADERS● COMPACT TRACK LOADERS 15

SURFACE MINING EXTRACTION & CONVEYING EQUIPMENT– Conveyor Systems • Draglines • Electric Rope Shovels • Hydraulic Mining Shovels 16

TELESCOPIC HANDLERS 17

TRACK LOADERS 18

PHB-Intro-Nom-14-BookmarkedPDF.indd 1PHB-Intro-Nom-14-BookmarkedPDF.indd 1 12/20/13 9:51 AM12/20/13 9:51 AM

CATERPILLAR PERFORMANCE HANDBOOKa publication by Caterpillar, Peoria, Illinois, U.S.A.

JANUARY 2014

2 Edition 44

Please direct any inquiries about the Performance Handbook to the Caterpillar Performance Handbook Coordinator at [email protected].

Performance information in this booklet is intended for estimating purposes only. Because of the many variables peculiar to individual jobs (including material characteristics, operator efficiency, underfoot conditions, altitude, etc.), neither Caterpillar nor its dealers warrant that the machines described will perform as estimated.

NOTE: Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Materials and specifications are subject to change without notice.

Printed in U.S.A. © 1979-2014 Caterpillar SEBD0351-44

CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow”and the “Power Edge” trade dress, as well as corporate and product identity used herein,

are trademarks of Caterpillar and may not be used without permission.


Edition 44 3

WASTE HANDLING 21

UNDERGROUND MINING EQUIPMENT– Conveyor Systems • Hard Rock • Longwall • Room & Pillar 20

TRACK-TYPE TRACTORS 19

WHEEL DOZERS ● SOIL COMPACTORS 22

WHEEL LOADERS ● INTEGRATED TOOLCARRIERS 23

WHEEL TRACTOR-SCRAPERS 24

ESTIMATING OWNING & OPERATING COSTS 25

FORMER MODELS 26

LAND CLEARING 27

MINING AND EARTHMOVING 28

STOCKPILE COAL HANDLING 29

TABLES 30

TECHNOLOGY PRODUCTS 31

TIRES 32


Machine performance must ultimately be meas ured in unit cost of material moved, a measure that includes both production and costs. Factors bearing directly on productivity include such things as weight to horse-power ratio, capacity, type of transmission, speeds and operating costs. The Perfor mance Handbook consid-ers these factors in detail. There are other less direct machine performance factors for which no tables, charts or graphs are possible. Serviceability, parts availability and operator convenience are examples. In compar-ing machine performance, all factors should be con-sidered. This Handbook is intended as an aid which, when coupled with experience and a good knowledge of local conditions, can assist in estimating true machine performance.

Many sections of the Handbook include tables or curves showing cycle times or hourly production figures for Cat® machines under certain conditions. State ments of conditions always accompany or precede the curves or tables. Before using any per formance information in this Handbook, a complete understanding of the qualifying conditions is essential. The data is based on field testing, computer analysis, laboratory research and experience; and every effort has been made to assure their correctness.

However, all such data is based upon 100% efficiency in operation — a status which cannot be achieved con-tinuously even under ideal conditions. Thus, in using such performance and production data, it is necessary to correct the results indicated in the handbook tables by appropriate factors. This allows for the anticipated actual job efficiency, operator efficiency, material char-acteristics, haul road conditions, altitude and other fac-tors which may reduce performance or production on a particular job.

Methods for estimating machine owning and oper-ating costs vary widely, depending on locality, indus-try practices, owner preferences and other factors. One method is suggested in the Handbook section on Owning and Operating Costs. When used with good judgment, it has provided reasonably accurate estimates in the past. Included in the Owning and Operating Section are guidelines, based on working conditions, to assist in estimating consumption of fuel and lubricants, tire life and repair costs for Cat machines. However, what one Handbook user regards as “excellent” con-ditions, another may consider “severe” or “average”, depending on his own experience and basis of compari-son. Therefore, these guidelines should be considered only approximations.

Caterpillar has made every effort to assure that the information contained in this Handbook is accurate and is a fair statement of the results to be achieved in the circumstances indicated. However, because of the many variables involved in estimating the production or per-formance of earthmoving machinery, their consumption of fuel and lubricants, tire life and repair costs, and the possibility of inadvertent errors or omissions in assem-bling this data, Caterpillar cannot and does not imply that all data in this book are complete nor that this level of performance will be achieved on a given job.

Specifications shown in this Handbook were current at time of printing. However, due to Caterpillar’s many machine improvement programs, specifications and materials may change without notice. For current speci-fications relating to a machine’s performance, please refer to the most recent Cat product specification sheet.

Caterpillar

4 Edition 44

PREFACE

ENVIRONMENT AND SUSTAINABILITY

Caterpillar supports environmental responsibility through sustainable development. Our products and ser-vices are intended to support sustainable development of global resources and they will meet or exceed appli-cable regulations and standards wher ever they are ini-tially sold. We establish and adhere to environmentally sound policies and practices in product design, engi-neering, and manufacturing. We educate and encourage

our customers to use the products they purchase from us in environmentally responsible ways. We take effec-tive steps to continually increase the natural resources efficiency and cleanliness of our facilities. When avail-able, the various product groups have included rele-vant sustain ability data with their content updates for inclusion in the Performance Handbook.


OPERATOR AND MACHINE PROTECTION

A well trained operator, working under suitable con-ditions, utilizing a modern, properly-equipped machine provides a machine-operator team capable of giving maximum production. These factors, along with appro-priate job site rules and communication procedures, are essential to coordinate people and machines working together.

Appropriately protected and maintained machines are less likely to suffer premature component failure or damage, and give operators the confidence and assur-ance they need to carry out their work. Further more, training is not complete until the operator reads, under-stands and agrees to follow the instructions provided in the Operation and Maintenance Manual included with every Cat machine.

Employers have a duty to provide a safe work place for their employees. The purchaser of a Cat machine has a duty to review his/her particular appli cation and job site for the machine to identify potential haz ards inher-ent to that application or job site. Based on the results of this hazard analysis, the appropri ate operator and machine protection configuration can be determined.

Caterpillar designs, builds, and tests its products to ensure the safety of operators, maintenance persons, ser-vice persons, and bystanders. That means people in, on and around Cat products. Caterpillar pro vides as stan-dard equipment the appropriate operator and machine protection for most applications. How ever, particular applications, including the use of some Work Tools, may require additional operator and/or machine protection. Caterpillar offers related options for most such applica-tions. However, there may be very special applications where the Cat dealer or the Purchaser may want to fabri-cate, or request Caterpillar to provide, custom or special guard ing. Your Cat dealer can help you with this hazard analysis and guarding configuration process.

I. Operator Training and Protection PracticesRemember that any kind of machine or mechanical device can be hazardous if not kept in good condition, or if operated by careless or improperly trained operators, or if operated in an irresponsible manner.

Listed below are some recommended basic steps that can be broadly applied to most work environments:● Train operators for the job they are assigned to do.

The length and type of training must comply with governmental and local regulations wherever they apply. As an example, machine operators in mining activities must be trained in accordance with Mine Safety and Health Administration (MSHA) regula-tions. Where specific regulations do not apply, no operator should be assigned to a job until he or she meets the following minimum requirements:– Completes proper training to operate the assigned

machine and understands that seat belts must be worn whenever seated in operator’s compart ment. SEAT BELTS SAVE LIVES!

– Reads and understands the Operation & Main-tenance manual for that machine, and knows that a copy of that manual is stored in the operator’s compartment.

– Reads and understands the AEM (Associa tion of Equipment Manufacturers) Safety Manual, or any other furnished manual related to rules for safe machine operation and identification of hazards. For exam ple, that includes the Work Tool Opera-tion and Maintenance Manual if a Cat Work Tool is involved in the given application.

– Has appropriate personal protective equipment and knows how to use it. This includes such things as hard hat, gloves, safety glasses, hearing protection, high-visibility vest, and safety shoes.

– Knows what the job requirements are, what other machines are working in the area, and is aware of any hazardous conditions that may arise.

Edition 44 5


● Be sure operators are alert and in proper physical and mental condition to perform their work assignments safely. No machine should be operated by a person who is drowsy, under the affect of medicines or drugs, suffers blackouts, or is suffering from any physical or mental distraction that could contribute to unsafe operation.

● Maintain proper job conditions and working proce-dures. Check the job for possible hazards, both above and below ground level. Look for all possible sources of danger to the operator and others in the area. When operating in hazardous conditions the door and windows must always be closed. Pay particular attention to conditions which may be hazardous or near the operating limits of the machine: e.g., side slopes, steep grades, potential overloads, etc. Examine the work site for restricted traffic patterns, obstructed views, congestion, under ground power or gas lines, etc. If the machine is equipped with a Quick Coupler, always make sure the Work Tool is properly attached by conducting an attachment test as directed in the Quick Coupler or Machine Operation and Mainte-nance Manual. Hazardous work conditions should be corrected wher ever possible and adequate warn ings should be posted when applicable.

● Provide the correct machine to handle the job and equip it properly for the job to provide the neces-sary operator protection. Check for compliance with all applicable governmental and local regulations. It is the legal responsibility of the machine owner or employer to see that his equipment complies with, and is operated in accordance with, all such requirements.

● Make sure the machine is properly maintained. The operator at the beginning of each shift should per-form a walk-around inspection before the machine is placed in operation. This process is described in the machine and Work Tool Opera tion and Main tenance Manual. If this inspection reveals any problems that could affect safety, the machine or Work Tool must not be operated until these problems are corrected. Some examples include:– Loose, bent or missing grab irons, railings or steps;– Worn, cut or missing seat belts (any seat belt over

three (3) years old must be replaced regard less of condition);

– Damaged windows in the operator’s compartment;– Worn, rubbing or abraded electrical insulation and

hydraulic hoses;– Material or unwanted debris accumulation;– Incompatibility of the component attachments

(Quick Couplers);– Hydraulic leaks that could impair the lock/secure

feature of a Quick Coupler or other securing devices;– Any fluid leaks; and– Missing or damaged guards.

● Know the limits of your machine and equipment. With certain Work Tool combinations, including Quick Couplers, the Work Tool can hit the cab or the machine. Always check for interference limits when first operating.

● It is the machine owner’s or employer’s responsibility to ensure the machine is properly maintained. Your Cat dealer will be glad to assist you in selecting and equipping the machine best suited for your job and in providing maintenance for your machines.

6 Edition 44


Edition 44 7

II. Machine ModificationsModifications must not be made to the machine that:– Interfere with operator visibility;– Interfere with ingress or egress from the machine;– Exceed the rated payload or gross combination

weight of the machine resulting in overloading the braking and/or steering system or the roll-over pro-tective structure (ROPS) capacity rating (shown on a plate affixed to the ROPS); or

– Place objects in the cab that intrude into the oper-ator’s space or that are not firmly fixed into place.

– Are not authorized by Caterpillar.

III. Operator-related Equipment OptionsEach job presents unique conditions that must be

taken into account. Consider direct dangers to the operator as well as all possible sources of distraction that could reduce operator efficiency and increase the chances of costly and dangerous mistakes. Climate-controlled, sound-suppressed cabs, and special exterior lighting are options available from Caterpillar that can address requirements of special working environments.

“Flexible” machines include hydraulic excavators (track-type, wheel-type, and compact), skid-steer load-ers, backhoe loaders and integrated tool-carriers can utilize interchangeable “Work Tools” to accomplish spe-cific tasks. Work Tools or any tool used in hazardous applications like demolition, quarry, logging, stump grinding, scrap handling, milling, and scaling, can create a need for special operator guarding. When flying debris from impact, cutting, shearing or sweeping attachments is present, additional protective devices such as a front screen, Falling Object Guarding System (FOGS, includes top & front guard ing), thick polycarbonate windshields or a combina tion of these is recommended by Caterpillar. The failure to provide proper operator/machine guarding in some of these applications can lead to machine dam-age, personal injury or death. Contact your Cat dealer for operator guarding options on your machine.

IV. Machine ProtectionCheck the job for unusually demanding conditions

that could cause premature failure or excessive wear of machine components. Additional protective devices such as heavy-duty radiator guards, crank case guards, engine enclosures, track roller guards and/or brake shields may be needed. Also, consider the use of anti-vandalism devices, such as cap locks and instru ment panel guards. The failure to provide proper guarding in some of these applications may lead to machine damage, personal injury or death. Contact your Cat dealer for machine-protection and vandalism- prevention options for your machine.

V. Fire PreventionRemember that most fluids on your machine are flammable!

To minimize the risk of fire, Caterpillar recommends following these basic steps:

– Always perform the Walk-Around Inspection described in Part I. It can identify many of the fire hazards described below.

– Remove trash (leaves, twigs, papers, etc.) that may accumulate in the engine compartment or around other hot parts on the product.

– Do not operate a machine if leakage of flamma-ble fluids is noticed. Repair leaks before resum -ing machine operation. Most fluids used in Cat machines should be considered flammable.

– Keep access doors to major machine compartments in working order to permit the use of fire fighting equipment, should a fire occur.

– Avoid attaching electrical wiring to hoses and tubes that contain flammable or combustible fluids. Hydrau-lic hoses can move during machine operation and abrade wires and other hoses if improperly secured.

– Replace any rubbing, damaged, frayed, kinked or leaking hydraulic hoses or fittings. Use genuine Cat parts or their equivalent, including both pressure and temperature limit capabilities.

– Follow safe fueling practices as described in Cat Operation and Maintenance Manuals, AEM Safety Manuals, and local regulations. Never store flam-mable fluids in the machine operator’s compart-ment, nor smoke while fueling the machine.

– As an additional safety measure, keep a fire extin-guisher on the machine in a location as specified in the Operation and Main te nance Manual.

– Consider installation of an after-market fire-sup-pres sion system (FSS) on the equipment if the appli-cation and working conditions warrant it.


VI. Safety RegulationsRegulations vary from country to country and often

within country. Your Cat dealer can assist you in prop-erly equipping your machine to meet applicable require-ments. Note: The general summaries given below are not substitutes for Owners or Employers reading and being familiar with the appropriate local laws.

(a) United States (US)With a few exceptions, all machine operations in the

United States are covered by federal and/or state regula-tions. If the machine is used in mining activities, the reg-ulations are administered by the Mine Safety and Health Administration (MSHA). Other activities, including construction, are under regulations administered by the Occupational Safety and Health Administration (OSHA). These agencies require employers to provide a safe working environment for employees. Caterpillar has the same objective.

OSHA and MSHA have adopted criteria for ROPS, Falling Object Protective Structures (FOPS), seat belts, warning horns, back-up alarms, operator sound lev-els, steering systems, and braking systems. Addi tional operator’s compartment protection may be required for machines engaged in logging, demolition and other special applications.

(b) European Union (EU)The EU Machinery Safety Directive applies to Cat

machines and most work tools. It requires that the “CE mark” be applied to the product and that a man-ufacturer’s declaration be provided. The “CE mark” indicates that safety issues have been addressed by applying the appropriate safety standards in the design and manufacture of the machine. The objective of the Safety Directive is to protect operators, specta tors and maintenance personnel. Caterpillar fully supports this objective.

VII. Sound SuppressionDifferent marketing areas have different noise emis-

sion requirements. Noise regulations usually specify limits for operators and spectators.

(a) United StatesOSHA and MSHA noise-control regulations set per-

missible noise-exposure limits for machine operators and employees. Operator protection from machine noise can be achieved by use of factory-built cabs as offered in the Caterpillar Price List. These cabs, when properly maintained and operated with the doors and windows closed, reduce the operator sound level for an eight-hour operating period to meet the OSHA and MSHA noise-exposure limits in effect at the date of manufac-ture. Variables that may be encountered on the job site, such as other nearby noise sources or noise-reflecting surfaces, may reduce the allowable work hours. If this occurs, hearing protection may be required. This is espe-cially true if a machine is not equipped with a closed cab. For example if the machine has no cab, or is being operated with the doors or windows opened.

(b) European UnionOperator sound-exposure requirements for machines

in Europe are very similar to the OSHA and MSHA regulations mentioned above. In addition to operator sound-exposure requirements, most types of Cat machines are subject to European Commission regulations for exterior sound levels. Caterpillar ensures its products sold in the EU comply with the applicable noise regulations.

VIII. Replacement Parts for your Cat Machine

8 Edition 44

WARNINGWhen replacement parts are required for this product, Caterpillar recommends using Cat replacement parts or parts with equivalent specifications including, but not limited to, physical dimensions, type, strength and material. Failure to heed this warning can lead to premature failures, product damage, personal injury or death of persons on, or around, the product.


Edition 44 9

NomenclatureTHE CAT PRODUCT LINE

ARTICULATED TRUCKSCapacity 23.6 to 39.5 metric tons (26 to 43.5 U.S. tons)

BACKHOE LOADERSDigging depth 4348 to 6501 mm (14'3" to 21'4")

725C*730C*

730C EJ

735B Series*740B Series*740B EJ Series

416E416F420F/420F IT422F

428F430F/430F IT432F434F

444F450E450F

MD6240MD6290MD6420

MD6420BMD6540

MD6640MD6750

501 HD521B522B

541 Series 2552 Series 2

525C535C545C

527 Cable527 Grapple

564574584/584HD

320D FM324D FM

325D FM568 FM

521B522B

541 Series 2552 Series 2

553C563C573C

HF 201BHF 221

SH-56BSS-56SC-57

SAT420 SAT630

HH44 DE 529559C579C

519 SM519 SM/EHC569 SM569 SM/EHC

924K930K938K

950K962K966K

980K988K990H

586C

GrapplesLogging ForksCouplersBuckets and ThumbsWoodchip Dozers and ScoopsRakes

SAT318 SAT223

MD5050MD5050T

MD5075MD5090

MD5125MD5150C

* OEM Solutions Group non-dumper/bare chassis for specialty applications available

DRILLS

FOREST PRODUCTS

Rotary Drills

Track Harvesters

Wheel Skidders

Track Skidders

Forwarders

Forest Machines

Track Feller Bunchers

Wheel Feller Bunchers

Felling Heads

SATCO Directional Felling Heads

Harvester Heads Knuckleboom Loaders

Wheel Loaders

Site Prep

Work Tools

SATCO Processor Heads

Track Drills


10 Edition 44

HIGHWALL MINING SYSTEMHW300

385C FS

MINI EXCAVATORS300.9D301.4C301.7D301.7D CR302.2D302.4D302.7D CR303.5E CR304E CR305E CR305.5E CR306E308E2 CR SB

SMALL EXCAVATORS311D LRR312D2312D2 GC312D2 L312E312E L313D2313D2 LGP314D CR314D LCR314E CR314E LCR316E L318D2 L318E L

MEDIUM EXCAVATORS320D L320D LRR320D RR320D2320D2 GC320D2 L320E320E L320E LN320E LRR321D LCR323D2 L323E L323E LN323E SA324D L324E324E L324E LN326D L328D LCR329D329D L329E329E L329E LN

LARGE EXCAVATORS336D2336D2 L336E336E L336E LN336E L H336E LN H340D L349D – FIX349D L – FIX349D L – VG349E L – FIX349E L – VG374D L390D390D L

M313D M315D M316D M318D M322D

HYDRAULIC EXCAVATORS

Track Models

Wheel Models

Front ShovelsOperating Weight 90 080 to 91 700 kg (198,592 to 202,164 lb)

Hydraulic ExcavatorsOperating Weight 1650 to 90 390 kg (3640 to 199,220 lb)

HYDROMECHANICAL WORK TOOLS

H25DH35E/E sH45E/E sH55E/E sH65E/E sH75E sH95E s

H110E sH115E sH120E sH130E sH140E sH160E sH180E s

G107BG112BG115BG120BG125B

G130BG145BG165BG185B

G305G330G310B

G315BG320BG325B

GSH15BGSH20BGSH22B

S305S320BS325B

S340BS365CS385C

MP15MP20MP30MP40

MP318MP324

Hydraulic Hammers

Contractor’s Grapples Demolition and Sorting Grapples

Orange Peel Grapples

Mobile Scrap and Demolition Shears

Multi-Processors


Edition 44 11

* OEM Solutions Group non-dumper for special applications availableMINING & OFF-HIGHWAY TRUCKS

Payload capacity 37 to 363 metric tonnes (41 to 400 tons)

MOTOR GRADERSFlywheel power 93 to 397 kW (125 to 533 hp)

ON-HIGHWAY TRUCKS

*All Wheel Drive.

Model Front Axle Chassis BBC BACT660S SBA 6x4 116" 54"CT660S SBA 8x6 116" 54"CT660L SBA 6x4 122" 54"CT660L SBA 4x4 122" 54"CT660L SBA 6x6 122" 54"CT660L SBA 8x6 122" 54"

CT680 SFA 6x4 124" 30"CT680 SFA 8x6 124" 30"

CT681 SFA 6x4 114" 28"

SBA = Set Back AxleSFA = Set Forward AxleBBC = Bumper to Back of Cab (inches)BA = Bumper to Front AxleL = Long HoodS = Short Hood

Chassis A x BA = Total Wheel EndsB = Powered Wheel Ends

PAVING PRODUCTS

PM102PM200 — 2.0 mPM200 — 2.2 m

PM201— 2.1 mPM201— 2.2 m

RM300 RM500

CS423ECS44CS533ECS54CS54BCS56

CS56BCS64CS64BCS66BCS68BCS74

CS74BCS76CS76BCS76 XTCS78B

CP44CP533ECP54CP54B

CP56CP56BCP64CP68B

CP74CP74BCP76

CB14BCB14B XWCB22BCB24BCB24B XTCC24BCB32B

CB34BCB34B XWCC34BCB434DCB434D XWCB44BCD44B

CB54CB54BCD54CD54BCB54 XWCB64

AP300AP500E

AP600DAP1000E

AP255EAP555E

AP655DAP1055E

PS150C CW14 PS360C CW34

Cold Planers

770G*772G*773E

773G*775G*777D

777G*785C*785D*

789D793DMT4400D AC

793FMT5300D AC

795F AC797F

120K120K2120M120M with AWD* option120M2120M2 with AWD* option12K12M

12M212M2 with AWD* option12M312M3 with AWD* option140K140K2140M 140M with AWD* option

140M2 140M2 with AWD* option140M3140M3 with AWD* option160K160M 160M with AWD* option160M2

160M2 with AWD* option160M3160M3 with AWD* option14M Global16M Global24M Global

Reclaimer/Soil StabilizersFlywheel power 250-321 kW (335-430 hp)Cutting width 2438 mm (8'0")

Vibratory and Pneumatic Tire CompactorsSingle Drum SmoothDrum width 1270 to 2130 mm (4'2" to 7'0")

Single Drum, PaddedDrum width 1270 to 2130 mm (4'2" to 7'0")

Double Drum and CombiDrum width 1000 to 2130 mm (3'3.4" to 7'0")

Asphalt PaversPaving width 914 to 9754 mm (3 to 32 ft)

Pneumatic Tire Asphalt CompactorsWheel loads 1134 to 5000 kg (2500 to 11,020 lb)

MATERIAL HANDLERS

M318D MHM322D MH

M325D MHM325D LMH

MH3037MH3049

MH3059 385C MH

Wheel Material Handlers Track Material Handlers


Skid Steer Loaders216B3226B3236D242D246D262D272D272D XHP

Multi Terrain Loaders247B3257D277D287D

Compact Track259D279D289D299D299D XHP

12 Edition 44

PIPELAYERSLifting capacity 18 145 to 91 625 kg (40,000 to 202,000 lb)

SKID STEER LOADERS/MULTI TERRAIN LOADERS/COMPACT TRACK LOADERSOperating Weight 2581 to 5267 kg (5690 to 11,612 lb)

SURFACE MINING EXTRACTION & CONVEYING EQUIPMENT

Conveyor Systems DraglinesSurface IdlersEngineered Class PulleysEngineered BTGsPre-Engineered BTGs

800082008750 — 22.9 m (75'0") Base8750 — 25.6 m (84'0") Base

Electric Rope Shovels

PL61 572R2 PL83 PL87

729573957495 HD7495

7495 HydraCrowd7495 HF7495 HF HydraCrowd

6015 Standard Attachment6015 Mass Excavation Attachment60186030604060506060

6015 FS6018 FS6030 FS6040 FS6050 FS6060 FS6090 FS

6018 AC6030 AC6040 AC6050 AC6060 AC

6018 AC FS6030 AC FS6040 AC FS6050 AC FS6060 AC FS6090 AC FS

Hydraulic Mining ShovelsOperating Weight 105 200 to 980 000 kg (231,920 to 2,610,510 lb)

Backhoe Configurations

Front Shovel Configurations

Backhoe Configuration with Electric Drive

Front Shovel Configuration with Electric Drive


Edition 44 13

TH255CTH336CTH337CTH406C

TH407CTH414CTH417CTH514C

TH255CTH406CTH407CTL642C

TL943CTL1055CTL1255C

TELESCOPIC HANDLERS

Non-U.S. Versions U.S. Versions

TRACK LOADERSBucket Capacity (Heaped)* 1.15 to 3.2 m3 (1.5 to 4.2 yd3)

*General Purpose Bucket.†Waste handling arrangement available.

953D† 963D† 973D†

R1300GR1600HR1700G

R2900GR3000H

AD30AD45B

AD55 Flat HaulAD60

D3K XL (LRC)D3K LGP (LRC)D3K2 XLD3K2 LGPD4K XL (LRC)D4K LGP (LRC)D4K2 XLD4K2 LGPD5K XL (LRC)D5K LGP (LRC)D5K2 XLD5K2 LGPD5R XL (LRC)D5R LGP (LRC)

D6K XLD6K LGPD6K2 XLD6K2 LGPD6N XL*D6N LGP*D6R* (LRC)D6R XL* (LRC)D6R LGP* (LRC)

D6T*D6T XL*D6T XW*D6T LGP*D7E*D7E LGP*D7R* (LRC)D7R XR* (LRC)D7R LGP* (LRC)

D8R* (LRC)D8R LGP* (LRC)D8T*D8T LGP*D9R (LRC)D9T*D10T2D11TD11T CD

TRACK-TYPE TRACTORSFlywheel power 55 to 634 kW (74 to 850 hp)

* Waste Handling Arrangements (WHA)

UNDERGROUND MINING EQUIPMENT

Load-Haul-DumpBucket sizes 2.4-11.6 m3 (3.1-15.2 yd3)

Articulated Trucks30-60 t (33-66 T) capacity

Hard Rock

LongwallRoof Supports

AFC Systems AFC Line Pans PF3 PF5 PF4 PF6 Stage Loader Line Pans PF4 PF6

CST Drive Systems CST30 CST65 CST45 CST115

Automated Plow Systems RHH800 GH800 GH1600

Shearers EL2000 EL3000 EL4000

Roof Support Carriers SH640 D SH660 D SH660 HD SH620 SH630 SH650 SH650 D SH650 VFD SH680

Shield Trailer SH150

Hard RockRock Flow System

Room & PillarContinuous MinersFace HaulersContinuous Haulage SystemsFeeder BreakersRoof BoltersScoopsLHD Vehicles (Load-Haul-Dumps)

Conveyor SystemsUnderground IdlersEngineered Class PulleysEngineered BTGsPre-Engineered BTGs


14 Edition 44

WHEEL DOZERSFlywheel power 173 to 597 kW (232 to 801 hp)

LANDFILL COMPACTORSFlywheel power 173 to 349 kW (232 to 468 hp)

SOIL COMPACTORSFlywheel power 173 to 264 kW (232 to 354 hp)

WHEEL LOADERS & INTEGRATED TOOLCARRIERSBucket Capacity (Heaped) 0.6 to 30 m3 (0.78 to 40 yd3)

* High lift arrangement available. † Waste handling arrangement available.

814F2 824H 834K 844H 854K

906H2907H2908H2910K914G2IT14G2914K

924K924K (LRC)930K930K (LRC)938K938K (LRC)

950H*†950K*†962H*†IT62H†962K*†966H*†966K*†

966K XE966M*†972H*†972K*†972M*†980H*†980K*†

986H988H988K*990H*992K*993K*994F*

816F2 826K 836K

815F2 825H

621K 631G

623K

627K 637G 657G

627K 637G 657G

637G 657G

WHEEL TRACTOR-SCRAPERS

Standard ModelsHeaped capacity 17 to 26 m3 (22 to 34 yd3)

Elevating ScrapersHeaped capacity 17.6 m3 (23 yd3)

Push-Pull ScrapersHeaped capacity 17 to 33.6 m3 (22 to 44 yd3)

Tandem Powered ScrapersHeaped capacity 17 to 33.6 m3 (22 to 44 yd3)

Coal Bowl ScrapersHeaped capacity 38 to 56 m3 (50 to 73 yd3)


content of introduction to performance … · caterpillar performance handbook a publication by...

Documents