contractor guide 2020 - thorn lighting...(4000k), both cri 80. katona is ip65 with protection...

Fast. Simple. Affordable.

CONTRACTOR GUIDE 2020

Member

THORN CONTRACTOR GUIDE The easy way to buy

Thorn Lighting has been operating in New Zealand since 1936 and was purchased by Zumtobel Group in 2000.

In 2016 we moved to new, purpose-built premises comprised of warehouse, factory and office space measuring over 2733 sqm. In 2019 almost 100% of our lighting turnover is LED.

Thorn brand stands for high-performing, efficient and reliable lighting solutions that are easy to use. Our products can be found in many different applications such as: sport, road, tunnel, cityscape, office, education or industry.

Thorn is a globally trusted supplier of quality outdoor and indoor lighting with integrated controls. Its products are used in over 100 countries.

THORNeco was launched in New Zealand in 2018 and is proving to be a very successful new brand. This modern and efficient product family is the economical answer for the wholesale market and OTC business. THORNeco is perfectly positioned to meet the current and future needs of electricians and installers.

All luminaires in the THORNeco family offer exceptional light quality, energy efficiency and a long life-span. THORNeco is available via our wholesale partners.

5 YEARGUARANTEE

Zumtobel Group is an international lighting group and a leading supplier of innovative lighting solutions, lighting components and associated services

5 YEAR WARRANTYThorn Lighting is a leading global luminaire manufacturer and provides a five year warranty for its complete product range.

THORN CONTRACTOR GUIDE The easy way to buy

4 CONTENTS

CETUS 6 CHALICE 8 KATONA 10

ESCORT 12 JEWEL 2 14 LUNA 16

COLLEGE 18 IQ WAVE 20 POPPACK LED 22

ROYAL 24 HIPAK LED 26 FORCE LED 28

AQUAFORCE PRO 30 LEDFIT 32

DOWNLIGHTS WALL OR CEILING MOUNT

SURFACE AND SUSPENDED BATTENS

SURFACE AND SUSPENDED INDUSTRIAL

FLOODLIGHTING

FLEXITY 34 CHARTOR 36 D-CO LED 38

VOLUPTO 40 PIAZZA 42 VOYAGER SOLID 44

VOYAGER SURFACE 45 VOYAGER BLADE 2 46 VOYAGER IP65 47

VOYAGER JUMBO 48 VOYAGER WALL 49 VOYAGER WIDE 50

VOYAGER RECESSED 51 VOYAGER TS2 52

URBAN

SURFACE AND SUSPENDEDEMERGENCY

6 DOWNLIGHTS

CETUSCETUS LED downlight incorporating thermally optimised, low height, aluminium body

FEATURESHigh efficacy up to 111lm/W for low energy consumption.

Useful life L80 at 25⁰C.

Direct replacement for traditional 1x26W or 2x26W compact fluorescent downlights with up to 65% energy saving.

Only 88mm overall height to allow installation into low and restricted ceiling voids.Sealed to IP44, suitable for use in bathrooms without the need for separate attachments.

MATERIALS/FINISH

Housing/body: aluminium, powder coated white RAL 9016

Reflector: powder coated white RAL 9016

INSTALLATION/MOUNTING

Tool free installation direct out of box.

Suitable for a wide range of ceiling types and depths from 1-40mm thickness.

Overall height of 88mm allows installation into low and restricted ceiling voids.

Cut out diameter = 190mm.

Remote driver makes installation and maintenance quick and easy.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOCETUS LED 1000 HF 830 9.4 1000 0.70 96242095CETUS LED 1000 HF 840 9.4 1000 0.70 96242096CETUS LED 2000 HF 830 19.5 2000 1.75 96242097CETUS LED 2000 HF 840 19.5 2000 1.75 96242098NOTE: Emergency options available

CETUS LED 1000LM CETUS LED 2000LM

8 DOWNLIGHTS

CHALICELED Downlight range in two sizes offering a direct replacement for CFL solutions

FEATURESHigh efficacy of up to 110lm/W for low energy consumption.

Less than 100mm overall height making it ideal for low ceiling void depth.

IP54 (IP20 from above) as standard for use in bathrooms/washrooms.

CFL replacement with low maintenance lifetime of L70 50,000 hours.

MATERIALS/FINISH

Housing/body material: Aluminium painted white

Bezel finish: RAL9016

Reflector finish: Satin

INSTALLATION/MOUNTING

Chalice can be installed directly from the box into a wide range of ceiling types including thicknesses from 1mm-40mm.

Remote driver for quick and easy installation.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOCHAL 150 LED1400-830 HF RSB 12.3 1400 0.49 96629023CHAL 150 LED1400-840 HF RSB 12.3 1400 0.49 96629024CHAL 150 LED2000-830 HF RSB 17.3 2000 0.49 96629025CHAL 150 LED2000-840 HF RSB 17.3 2000 0.49 96629026CHAL 150 LED3000-830 HF RSB 27.5 3000 0.49 96629027CHAL 150 LED3000-840 HF RSB 27.5 3000 0.49 96629028CHAL 200 LED1400-830 HF RSB 13.2 1400 0.91 96629019CHAL 200 LED1400-840 HF RSB 13.2 1400 0.91 96629020CHAL 200 LED2000-830 HF RSB 17.8 2000 0.91 96642304CHAL 200 LED2000-840 HF RSB 17.8 2000 0.91 96642305CHAL 200 LED3000-830 HF RSB 27.5 3000 0.91 96629021CHAL 200 LED3000-840 HF RSB 27.5 3000 0.91 96629022

150 VERSION 200 VERSION

10 WALL OR CEILING MOUNT

KATONAThe problem solver for almost any lighting task

FEATURESVery slim, functional and well protected luminaire for installation on walls and ceilings, indoors and outdoors.

Available in two designs, round and square in a white finish with two lumen packages, 1000lm and 2000lm.

Offered in warm white (3000K) or cool white (4000K), both CRI 80.

Katona is IP65 with protection against dust and water, making it an ideal fitting for indoor and outdoor applications.

IK10 rating resists impacts up to 20 joules ensuring a high level of protection for public circulation areas.

Clean, smooth aesthetic design reduces dust and dirt accumulation, ensures easy cleaning and lowers maintenance requirements.

MATERIALS/FINISHBody and Bezel: white polycarbonate

Diffuser: white polycarbonate

Screws: steel, zinc plated

INSTALLATION/MOUNTINGSuitable for installation directly to walls or ceilings, indoors or outdoors. Loop-in, loop-out is possible for cables up to 2.5mm². BESA compatible.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NO

RoundKAT RD 1000-830 HF 8.3 1000 0.94 96631303KAT RD 1000-840 HF 8.3 1000 0.94 96629365KAT RD 2000-830 HF 16.3 2000 0.98 96631305KAT RD 2000-840 HF 16.3 2000 0.98 96629367

SquareKAT SQ 1000-830 HF 8.3 1000 0.96 96631306KAT SQ 1000-840 HF 8.3 1000 0.96 96629368KAT SQ 2000-830 HF 16.3 2000 0.99 96631308KAT SQ 2000-840 HF 16.3 2000 0.99 96629370

Side EntryKAT RD SE 1800-840 HF 16.3 1800 1.5 96631537NOTE: Emergency and Microwave Sensor options available

ROUND VERSION SQUARE VERSION


ESCORTA robust and durable bulkhead for surface mounting, sealed to IP65

FEATURESDurable cast alloy construction for interior and exterior usage.

A self-contained IP65 weatherproof bulkhead luminaire.

Suitable for interior and exterior industrial or public amenity usage.

Vandal resistant materials and fixings.

Complete with 4000K LED.

MATERIALS/FINISHDiffuser: opal polycarbonate with vandal resistant screws

Body: cast aluminium, finished white

Control gear: switch start

INSTALLATION/MOUNTINGDirect wall or ceiling mounting. Drill points on rear for ceiling/wall box/BESA mounting. Rear cable entry hole and mounting points pre-drilled and sealed with rubber grommets. Ø20mm cable entry at each end and 4 fixing points. 3-way terminal block 2x2.5mm² capacity. Cable gland and blanking grommets (2) supplied.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOESCORT LED I-SLCT 800/1000-840 OP WH 8 800/1000 1.2 96630597NOTE: Emergency options available

*All dimensions in mm


JEWEL 2A basic wall or ceiling mounted IP65 bulkhead suitable for indoor or outdoor use

FEATURESCompact size with smooth lines.

Sealed to IP65.

50,000 hour LED CRI>80.

Suitable for indoor or outdoor use.

MATERIALS/FINISHBlack or white polycarbonate base with opal diffuser.

INSTALLATION/MOUNTINGWall or ceiling mount, indoor or outdoor.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOJEWEL 2 LED BULKHEAD OP WHI 10 1000 0.4 96294620JEWEL 2 LED BULKHEAD OP BLK 10 1000 0.4 96294621

300

40


LUNAAn ultra slim high light output LED Bulkhead

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOLUNA 08-12W 1120-840 12 1120 0.45 96293743LUNA 12-18W 1620-840 WH 18 1620 1.1 96293744

LUNA 12-25W 2490-840 WH 25 2490 1.4 96293745

Tri-colourLUNA 12-18W 830\840\857 SELECT WH DIM 18 1800 1.1 96294148

FEATURESVery slim profile polycarbonate diffuser.

IP54 on all models for use in damp areas.

High lumen packages with very even diffuser luminance.

MATERIALS/FINISHWhite moulded body with opal polycarbonate diffuser.

INSTALLATION/MOUNTINGQuick wall and ceiling mounting is easy with supplied quick mounting bracket.

18 SURFACE AND SUSPENDED

COLLEGEA curved profile range of linear LED luminaires for surface or suspended mounting

FEATURESClear prismatic diffuser in polycarbonate for specific light control and impact resistance.

Rigidly fixed diffuser held in place by screwed on polycarbonate end caps for improved diffuser security and vandal/impact resistance.

Sealed to IP44.

Easy installation and cleaning.

MATERIALS/FINISHBody and gear tray: white galvanised prepainted steel

End caps: polycarbonate

Diffuser: precision extruded clear prismatic polycarbonate

INSTALLATION/MOUNTINGTwo cable entry holes (Ø21.5mm) in the centre of the back spine.

Optional cable entry through each end cap. Fitting supplied with sealing grommets and ‘quick-fix’ horseshoe sliding washers for direct screw fixing to surface.

Standard BESA fixings. 5 x 2 x 2.5mm2 + 3 x 2 x 2.5mm2 piano key terminal block for dimmable emergency versions.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOCOLLEGE LED4200-840 HF L1200 33 4200 3.63 96628932COLLEGE LED2900-840 HF L1500 23 2900 4.44 96628922COLLEGE LED4650-840 HF L1500 37 4650 4.44 96628918COLLEGE LED6500-840 HF L1500 64 6500 4.44 96628877NOTE: Emergency, dimming and control options available

20 SURFACE AND SUSPENDED

IQ WAVESurface or suspended luminaire with modern, flowing lines

FEATURESA lightweight, modern surface or suspended luminaire with indirect LED light source.

Innovative and Thorn patented MV tech optic offers excellent uniformity and glare control.

Direct/indirect light for illuminance on faces and walls to encourage a comfortable, communicative working environment.

Possibility to install as continuous run through wiring.

Easy, wireless solution allows retro fitting with no rewiring.

4000K colour temperature.

MATERIALS/FINISHBody, diffuser, frame and endcaps: polycarbonate (TPa) finished in white (close to RAL9016)

Gear tray: pre-coated white steel. Complete with 4000K LED

INSTALLATION/MOUNTINGSuitable for suspension with included Y suspension kit and pre-assembled power cord.

Suitable for direct surface or BESA mounting, central or end-cap cable entries.

Standard products can be connected via optional continuous run kit.

Through wiring versions are available.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOSurface IQ SURF S LED2600-840 HF WH 22 2600 4 96629267IQ SURF S LED4250-840 HF WH 40 4250 4 96629269IQ SURF L LED4250-840 HF WH 35 4250 4.9 96629271IQ SURF L LED4900-840 HF WH 42 4900 4.9 96629273IQ SURF L LED6700-840 HF WH 61 6700 4.9 96629275

SuspendedIQ SUSP S LED4250-840 HF ML3 WH 40 4250 4.3 96629279IQ SUSP S LED6700-840 HF ML3 WH 61 6700 4.3 96629283NOTE: Also available: integrated PIR and microwave sensors, controls, wireless, wiring and mounting options

22 BATTENS

POPPACK LEDBatten with integrated LED technology for low energy consumption

FEATURESLED 1:1 replacement for single and twin fluorescent battens.

Lumens range from 3000lm to 6000lm.

Up to 136lm/W.

4000K and CRI 80.

Useful life: 50 000h L80.

Optional screws can be added to end caps to lock the housing for increased security.

Additional savings can be achieved via DALI control and an integral PIR sensor.

MATERIALS/FINISHBody: coated, formed steel, white (RAL9016)

End caps: injection moulded polycarbonate, white

Diffuser: textured opal acrylic

INSTALLATION/MOUNTINGElectrical connection via 3 x 2 2.5mm² terminal block.


DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOPOPPACK LED3000-840 HF L1200 23.5 3000 1.4 96630918POPPACK LED4500-840 HF L1200 36.4 4500 1.4 96630922POPPACK LED6000-840 HF L1500 52 6000 1.7 96630938NOTE: Switchable, DALI ballast, sensor and emergency options available

24 RECESSED

ROYALAn efficient ultra slim recessed LED luminaire

FEATURESRecess LED modular luminaire with high performance design.Micro prismatic diffuser reduces glare control.Ready for use, supplied with all components including flex and plug.Life: L80 70 000hrs at 25⁰ C (L70>60 000hrs at 50⁰C.Suitable for UGR19 requirements.Luminaire efficacy: 117lm/W.Fixed output Tridonic driver.

Panel part no. and driver part no. to be ordered concurrently.Suitable for office, retail, hospital and schools.

MATERIALS/FINISHBody: white painted aluminium frameDiffuser: micro-prismatic diffuser

INSTALLATION/MOUNTINGSuitable for recessed mounting in T-bar.

Pre-wired 1.5m flex and plug.

Panel KitDESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOROYAL PANEL LED3500-840 12X3 HF TRI FP 31 3500 4 kg 96648543ROYAL PANEL LED4500-840 12X6 HF TRI FP 42 4500 7 kg 96648544ROYAL PANEL LED2700-840 6X6 HF TRI FP 23 2700 4 kg 96648545

*Glare evaluation in accordance with AS/NZS 1680.1 for standard office(X = 4 H, Y = 8 H, reflection factors 70/50/20

DriverDESCRIPTION DRIVER CONTROL PART NOROYAL-DRV TR-FIX 3500 800mA CON FP Fixed Output 96648560ROYAL-DRV TR-FIX 4500 1050mA CON FP Fixed Output 96648562 ROYAL-DRV TR-FIX 2700 600mA CON FP Fixed Output 96648558

26 INDUSTRIAL

HIPAK LEDThe third generation of this innovative luminaire offers stunning performance and value

FEATURESHigh bay luminaire with plug and play connection for rapid installation.

Two sizes and six lumen outputs ranging from 10,000lm up to 35,000lm.

Wide (WD) light distributions and specially designed reflectors.

DALI (HFI-X) enables greater energy savings plus motion and daylight sensor integration.

Highly efficient one-for-one replacement for conventional industrial luminaires. With a higher efficacy than its predecessors, it promises a quicker payback.

HIPAK is also suitable for applications such as retail, where appearance and visual comfort are high priorities.

MATERIALS/FINISHHousing: Die cast aluminium

Lens/Diffuser: polycarbonate

INSTALLATION/MOUNTINGSupplied pre-wired with quick connect plug and mounting hook.

Stirrup mounting accessories to be ordered separately. Refer to website for other mounting instructions.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOHIPAK LED10000-840 HFI-X WD GEN3 75.3 10000 3.15 96630803HIPAK LED15000-840 HFI-X WD GEN3 103.5 15000 3.15 96630804HIPAK LED20000-840 HFI-X WD GEN3 134.5 20000 3.15 96630805HIPAK LED25000-840 HFI-X WD GEN3 176 25000 5.7 96630806HIPAK LED30000-840 HFI-X WD GEN3 201.4 30000 5.7 96630807HIPAK LED35000-840 HFI-X WD GEN3 233.7 35000 5.7 96630808

Sensor SENSOR MWS HIPAK GEN3 96630823

Stirrup HIPAK STIRRUP L MCE/MWA (1pc.) G3 96631860HIPAK STIRRUP S MCE/MWA (1pc.) G3 96631534NOTE: Emergency options available

28 INDUSTRIAL

FORCE LEDCompact IP66 dust and moisture proof LED luminaire

FEATURESDust and moisture proof luminaire with fully recyclable aluminium body.

Lumen packages 4150lm and 6150lm.

Highly efficient LEDs (>120lm/W) reduce energy consumption. Further savings from longer maintenance lifecycle.

Unique prismatic diffuser and wireless integrated controls.

MATERIALS/FINISHCanopy: fully recyclable aluminium painted white

Diffuser: polycarbonate with linear prisms

Toggles: stainless steel

INSTALLATION/MOUNTINGFor surface, BESA or suspended mounting and outdoor wall mounting without canopy.

Quick fix brackets supplied for surface mounting. Mounting kits for conduit, chain suspension and catenary suspension are available as accessories. Complete with 4000K LED.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOFORCELED 4000 HF L840 34 4000 2.61 96617235FORCELED 6000 HF L840 53 6000 2.65 96242061NOTE: Emergency option available

30 INDUSTRIAL

AQUAFORCE PROAquaForce Pro sets a new standard for moisture and dust resistant LED lighting

FEATURESIP66 rating stands against dust and powerful jets of water.

Unique Drip Edge Effect stops dirt and moisture from gathering on the luminaire.

Cutting-edge light transmission technology with refraction prisms provides smooth light without sharp edges.

EasyClick mechanism allows simple, snap-on mounting and seven different wiring possibilities are available.

4000K colour temperature CRI>80 with 3 MacAdam ellipses.

Luminaire efficacy: Up to 132lm/W.

Medium-beam (MB) light distribution.

Complies with the requirements of international food industry standards.

MATERIALS/FINISHCanopy: light grey polycarbonate

Diffuser: high transmission opal polycarbonate with refraction prisms

INSTALLATION/MOUNTINGPatented snap-on mechanism EasyClick for clipless mounting of diffuser. For surface or suspended mounting.

Quick-fix brackets supplied for surface mounting. Suitable for ceiling or wall (both vertically and horizontally). Mounting kits for conduit, chain suspension and catenary suspension are available as accessories. Suitable for through wiring with H05W or NYM cable (rated 10A).

NOTE: Please contact your consultant if you are planning to use the luminaire in environments with chemical pollutants, high or condensing humidity and major variations in temperature.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOAQFPRO S LED 2900-840 PC WB HF 22 2900 1.7 92901967AQFPRO S LED 4300-840 PC WB HF 34 4300 1.7 92901916AQFPRO L LED 6400-840 PC WB HF 51.4 6400 2.1 92901898AQFPRO L LED 8000-840 PC WB HF 64 8000 2.5 92901918NOTE: Available in fixed output or DALI dimmable control gear and Quick connect and built-in through wiring. Also available in emergency options.

32 FLOODLIGHTING

LEDFITAn ultra lightweight, reliable and efficient alternative to general purpose HID floodlights

FEATURESUltra lightweight, compact design for ease of installation and minimal aesthetic impact.

True asymmetric optic provides light distribution and excellent light control with no need to tilt.

Maintenance free for 50 000 hours lifetime.

Reduce energy consumption by approximately 80% compared with similar HIT solutions.


Luminaire efficacy: 100 lm/W.

MATERIALS/FINISHBody: die cast aluminium light grey, 150 sanded, textured RAL9006

Stirrup: galvanised steel

Visor: polycarbonate with external surface powder coated light grey, 150 sanded, textured RAL9006

INSTALLATION/MOUNTINGPre wired with 60cm cable.

Stirrup can be fixed by one M10 and/or two M8 fixation points.

Reversible allowing different mounting positions.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOLEDFIT M 90W A/S CL1 L840 90 W 9000 3 96628333LEDFIT S 45W A/S CL1 L840 45 W 4500 1.7 96628332

34 URBAN

FLEXITYDiscreet and versatile LED lantern for city space lighting

FEATURESModern, discreet and versatile post top LED lantern which is easy to integrate into the cityscape and residential areas.

100,000 hour maintenance free lifetime for fast return on investment and low total cost of ownership.

3600lm, 4000K.

Luminaire efficacy: 79-90lm/W.

LED light source, dedicated optics and integrated Bi-power dimming for energy savings.

Compatible with DALI, 1-10V, RF, Power Line, Minicell, Nema, Presence Detection.

Clear UV stabilised polycarbonate enclosure.

MATERIALS/FINISHCanopy and base: die-cast aluminium (EN AC-46100) powder coated dark grey (close to RAL7043)

Enclosure: clear polycarbonate. Complete with 4000K LED

INSTALLATION/MOUNTINGRecommended mounting height of 3m to 6m on post top spigot/columns Ø60mm or Ø76mm.

Post top mounting to Ø76mm column, maximum spigot length 75mm. Pre-wired with 5m cable.

Connector version supplied with 1m wire and connector.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOFLEX 24L50-740 WSC-S CL2 W5 D76 ANT 40 3600 4.7 96270782FLEX 24L105-740 WSC-S CL2 W5 D76 ANT 83 6550 4.7 96271114

36 URBAN

CHARTORA timeless bollard offering modest visual guidance and comfortable white light with minimal glare

FEATURESSuitable for any application thanks to high specs and two mounting types: base plate (MPL) and ground (MGR).

Simply order one post and one head, for a complete bollard.

Semi-opal, anti-UV diffuser.

The LED head can be easily connected to all Chartor Bollard types for refurbishment to a low power, low maintenance luminaire. Simply connect the LED driver directly to the mains.

MATERIALS/FINISHHead: die-cast aluminium, black

Lens: clear polycarbonate

Internal optics: die-cast aluminium

Post: galvanised aluminium painted powder coat black

INSTALLATION/MOUNTINGBase plate or buried mounting, latter option embeds 450mm into the ground.

250mm base plate version fixes via four Ø15mm holes at 200mm centres.

Ø60mm central hole for wiring. Three way terminal block for 2 x 4mm² cable.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOHead with Fresnel Lens CHARTOR HEAD LF LED1500-840 SATIN BLACK 24.5 1500 2.3 96646244CHARTOR HEAD LF LED800-840 LUC SATIN 800 2.3 96649333

PostCHARTOR POST MGR BK - 10 96018951

38 URBAN

D-CO LEDA timeless LED bollard offering comfortable visual guidance

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOD-CO LED BOLLARD 700 30L50 840 CL1 14 700 4.15 96262146D-CO LED BOLLARD 1000 30L50 840 CL1 14 1000 5.45 96262145

FEATURESComfortable white light with no glare provided by a semi-opal anti-UV PC diffuser.

Suitable for any application thanks to high specs and two heights.

50,000 hour lifetime (L80, 25⁰) ensures low maintenance costs.

4000K LED, CRI>80.

Flange mounting.

MATERIALS/FINISHTop and body: aluminium, powder coated grey 900

Diffuser: semi-opal anti-UV polycarbonate

INSTALLATION/MOUNTINGSuitable for flange mounting.

Suitable for base plate mounting.

AS/NZS 60598

40 URBAN

VOLUPTOA smart, post top LED lantern with a radially symmetric distribution

FEATURESVolupto offers a new, decorative, modern approach for city environments.

Attractive lighting performances designed around technology with a wide variety of light distribution options.

With its high-tech mixing chamber, Volupto minimises glare and maximises efficiency for an unobtrusive luminaire effect.

A truly intelligent luminaire with fully integrated motion solution together with further connectivity options.

MATERIALS/FINISHBase and canopy: corrosion resistant die cast, powder coated aluminium finished texturised anthracite grey (close to RAL7043). Additional colours on request.

Diffuser: UV stabilised polycarbonate (up to IK10)

Internal reflector: highly reflective white

INSTALLATION/MOUNTINGPost top mounting: Ø60mm. Low weight for ease of manipulation. Pre-wired for ease of installation, 1 tool. 120⁰ fixing screws for perfect adjustment on the pole.

Maintenance with access from above, one tool.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOVO 18L50-740 RS CL1 W5 T60 ANT 28 3800 7.59 96631905VO 18L70-740 RS CL1 W5 T60 ANT 40 5000 7.59 96631907VO 18L105-740 RS CL1 W5 T60 ANT 60 7000 7.59 96631909

42 URBAN

PIAZZAA robust wall mounted outdoor luminaire suitable for building perimeter applications

FEATURESUnique photometrics with 3 metre forward light throw and 12 metre spacing.

Very low upward light throw with less than 2.5% ULOR.

Excellent 116 lm/W efficiency.

Easy installation, back mounted, BESA and surface mounted conduit compatible.

Rated 60,000h L70 at 25⁰C.

MATERIALS/FINISHBack-plate: die cast aluminium painted anthracite (RAL7016)

Body: polycarbonate in anthracite colour (RAL 7016)

Diffuser: textured clear polycarbonate

INSTALLATION/MOUNTINGWall mountable. Ø20mm cable entry via rear or side conduit entries. Recommended 3-4 metre mounting height. Complete with 4000K LED.

DESCRIPTION CIRCUIT POWER (W) LUMEN OUTPUT WEIGHT (KG) PART NOPIAZZA II LED 1690-840 HF ANT 15.4 1690 2.8 96666256PIAZZA II LED 2700-840 HF ANT 25 2700 2.8 96666261

PhotocellPIAZZA II LED 2700-840 HF P ANT 25 2700 2.8 96666264

44 EMERGENCY

VOYAGER SOLIDLED bulkhead for easy emergency lighting

FEATURESThe luminaire can be wall or ceiling mounted.

Self test emergency lighting circuit.

3 hour, electronic, fixed output control gear.

Flexible switch allows luminaire to be installed maintained or non-maintained.

Bulkhead emergency luminaire for use without decals.

MATERIALS/FINISHBody: large size, white polycarbonate

Cover: transparent polycarbonate

INSTALLATION/MOUNTINGEasy installation with hinged electronics and big wiring space.

DESCRIPTION CIRCUIT POWER (W) WEIGHT (KG) PART NOVOYAGER SOLID L MS E3T-S WH 2.3 0.9 96629765

AS/NZS 2293

VOYAGER SURFACEA high performance LED emergency light

FEATURESWith energy efficient LED lamps and reliable lithium-ion battery, the Voyager Surface delivers superior light output allowing greater spacing.

Low 0.5W standby power consumption.

Retrofitting is easy with an adapter plate to suit older applications included in the box.

Tamper resistant with no dome required.

Suitable for most emergency lighting applications.

50,000 hour LED.

Non-maintained manual test switch.

Lithium-ion battery (3 year warranty).

MATERIALS/FINISHWhite powder coated steel rim with white aluminium disc.

INSTALLATION/MOUNTINGSurface mount.

DESCRIPTION CIRCUIT POWER (W) WEIGHT (KG) PART NOVOYAGER SURFACE DISK D40 E2 0.5 0.5 96294578

AS/NZS 2293

46 EMERGENCY

VOYAGER BLADE 2LED Slimline Exit Light

FEATURESEnergy efficient low 3W standby power consumption.

One box solution: comes with both and single and double-sided decals in running man pictograph and the exit decal.

Maintained manual test switch.

24m viewing distance.

50, 000 hour LED.


MATERIALS/FINISHPolycarbonate body with polycarbonate diffuser.

INSTALLATION/MOUNTINGTerminal block and cable entry.

Wall, ceiling single-sided and ceiling double-sided mounting.

DESCRIPTION CIRCUIT POWER (W) WEIGHT (KG) PART NOVOYAGER BLADE 2 SURFACE 24M E2 3 1.15Kg 96294579

AS/NZS 2293

VOYAGER IP65LED weatherproof exit light

FEATURESLow 3W standby power consumption.

One box solution: Single Running Man pictograph and EXIT decals included.

Maintained manual test switch.


50,000 hour LED.


MATERIALS/FINISHPolycarbonate body with polycarbonate diffuser


Wall or ceiling mount.

DESCRIPTION CIRCUIT POWER (W) WEIGHT (KG) PART NOVOYAGER IP65 EXIT 24M E2 3 1.53 96294584

AS/NZS 2293

48 EMERGENCY

VOYAGER JUMBOHighly visible LED exit light

FEATURES40m viewing distance.

One box solution: comes with both single and double sided decals in running man pictograph and exit decal.

Easy installation.

Energy efficient long life 50,000 hour LED.

Maintained, manual test switch.


MATERIALS/FINISHPowder coated metal frame with polycarbonate diffuser.


Wall, ceiling single-sided and ceiling double-sided.

DESCRIPTION CIRCUIT POWER (W) WEIGHT (KG) PART NOVOYAGER JUMBO EXIT 40M E2 5.3 4.3 96294583

630mm

320

100

AS/NZS 2293

VOYAGER WALLLED wall mount exit light

DESCRIPTION CIRCUIT POWER (W) WEIGHT (KG) PART NOVOYAGER WALL EXIT 24M E2 3 1.1 996294581

AS/NZS 2293


One Box solution: Single Running Man pictograph and EXIT decal included.





MATERIALS/FINISHPowder coated metal frame with polycarbonate diffuser.



50 EMERGENCY

VOYAGER WIDEWide body LED emergency exit light


One box solution: includes both single and double-sided decals in running man pictograph and the exit decal.

Easy installation.








DESCRIPTION CIRCUIT POWER (W) WEIGHT (KG) PART NOVOYAGER WIDE EXIT 24M E2 3W 1.35 96294580

378mm

202m

m

160mm

378mm

160m

m

73.5

mm

350mm73mm

220m

m

350mm 73mm

213m

m

GWNE1609

GWNE1612

GWRE1611

GWRE1610

AS/NZS 2293

VOYAGER RECESSEDLED recessed exit light

FEATURESLow 3W standby power consumption.One box solution: comes with both single and double-sided decals in running man pictograph and the exit decal.Energy efficient long life 50,000 hour LED.Easy installation.Maintained, manual test switch.24m viewing distance.Lithium-ion battery (3 year warranty).


INSTALLATION/MOUNTINGTerminal block and entry cable.

Recessed.

DESCRIPTION CIRCUIT POWER (W) WEIGHT (KG) PART NOVOYAGER BLADE RECESSED 24M E2 3W 1.3 96294582

195

AS/NZS 2293

52 EMERGENCY

VOYAGER TS2Double spot LED emergency luminaire

FEATURES2 x 3W energy efficient LED.

Low 1.0W standby power consumption.

Light weight for easy wall mounting.

Supplied with flex and plug with adjustable heads.

Long life LED in non-maintained mode.

Useful in areas where it is difficult to mount conventional emergency luminaires.

Can be used outside in loading docks, carparks and evacuation assembly points.

Replaces 2x20W and 2x35W traditional halogen flood units.

Non maintained, manual test switch.

50,000 hour LED.


MATERIALS/FINISHPolycarbonate body.

INSTALLATION/MOUNTINGFlex and plug supplied.

Wall mount.

DESCRIPTION CIRCUIT POWER (W) WEIGHT (KG) PART NOVOYAGER TS E2 1W 0.85 96294585

273

148

290

68

C

AS/NZS 2293

54 SAFETY AND QUALITY

STANDARDS

REGULATORY COMPLIANCE MARK (RCM)All luminaires and lighting equipment which are to be sold in Australia and New Zealand must be permanently marked with the Regulatory Compliance Mark (RCM). The RCM tick indicates compliance to:

• Electrical Safety – Electrical Regulatory Authorities Council (ERAC) – Australian and New Zealand State Regulators

e.g. NSW Fair Trading – Australian and New Zealand Standards

• Electromagnetic Compatibility and Radio Frequency Operation

- Australian Communications and Media Authority (ACMA)

– Australian and New Zealand Standard

Most Australian and New Zealand Standards (AS/NZS) used for RCM compliance are based on similar EN or IEC Standards with similar numbering. The AS/NZS requirements are similar to the equivalent EN or IEC standard although some additional requirements are also prescribed.

ELECTRICAL SAFETYAS/NZS 60598.1:2017 Luminaires – General requirements and tests (IEC 60598–1, Ed. 8.0 2014).

AS/NZS 60598.2.2:2016 Recessed luminaires (IEC 60598–2–2, Ed. 3.0 2011 ).

AS/NZS 60598.2.3:2015 Luminaires for road and street lighting (IEC 60598–2–3, Ed. 3.1 2011 ).

AS/NZS 60598.2.5:2002 Luminaires – Particular requirements – Floodlights (IEC 60598.2.5:1998).

AS/NZS 60598.2.22:2005 Luminaires for emergency lighting (IEC 60598–2–22, Ed. 3.1 2002).

AS 2293.3–2005 Emergency escape luminaires and exit signs (Australia Specific with 2 Hour requirement).

ELECTROMAGNETIC COMPATIBILITYAS CISPR 15:2017 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

(CISPR 15:2013+AMD1 :2015 ED.8.1 ).

AS/NZS 4268:2017 Radio equipment and systems – Short range devices – Limits and methods of measurement.

Various LED types are available on the market, performing different tasks with respect to service life, lighting quality and thermal management, depending on the application involved. So far there are only few standards enabling objective comparison.

TEMPERATURESIn the data sheets provided by LED manufacturers, the temperature at the semiconductor (Tj = T junction) is generally determined to be 25°. The Tc temperature, however, is indicated for a measuring point on the LED board. If the temperature defined by the board manufacturer is observed, the service life stated in the data sheet and/or the luminous flux of the module will be achieved.As this information in part substantially differs from the temperature levels given directly on the chip, this may easily cause some confusion with respect to reference values.

LUMINOUS FLUX LEVELS AND EFFICIENCYThe light emanating from the LED chip or the LED board is call ed luminous flux. In LED lighting we talk about the luminous flux of the luminaire instead of the lamp lumen factor. The luminous flux of the luminaire designates the light actually emanating from the luminaire. Efficiency is indicated in lumens per watt (lm/W). It designates the ratio of luminous flux to power supplied.

COLOUR TEMPERATUREWhether the LED and/or the luminaire has warm or fairly cool light can be derived from the colour temperature indicated. The higher the colour temperature, the cooler the lighting effect. A colour temperature of 3000 K is generally called warm. 4000 – 4200 K is perceived as intermediate and >5500 K as cool white.

SERVICE LIFEUsually, details regarding the service life of LEDs at specific temperatures are indicated by LED manufacturers in/on the LED chip (see diagram). To achieve these, reliable thermal management must absolutely be ensured in the luminaires. For this purpose, Zumtobel Group uses various methods explained in greater detail under “Thermal management”. The service lives of the LED chips/boards are indicated in the ZG catalogues and specifications. Product specific features, such as more favourable thermal conditions, e.g. lower temperatures than required by the manufacturer, have already been taken account of.Another important question is which luminous flux level may be expected at the end of service life. A level of 70 % is normally assumed. Some manufacturers, however, indicate a luminous flux of 50 %. These specific features should be observed when selecting and comparing products.

The luminous flux of an LED depreciates faster at higher temperatures.Efficient thermal management extends the life of LEDs.Please consider the definition of life as stated by the LED manufacturer.

Operating Hours

55°C 80°C 100°C 125°C

Rel

ativ

e lu

min

ous

flux

LED QUALITY CRITERIAThere is LED and there is LED


LUMINOUS FLUX LEVELS OF LUMINAIRESOne critical aspect in comparing LED luminaires of different suppliers is the comparison of luminous flux levels, as mentioned above. In the catalogues of many manufacturers, you will find details regarding the luminous flux and efficacy of individual LEDs at ambient temperature of 25 °C, details regarding the luminous flux levels of the LED board used at a specific Tc temperature, but also details regarding the luminous flux levels of luminaires and luminaire efficacy levels, including the power loss of drivers and any potential loss of efficacy through lighting optics, such as lenses, reflectors or mixing chambers.

The indication of the luminous flux of the luminaire and of the system efficacy in catalogue data and specifications certainly is the most meaningful as it indicates the actually available luminous flux emanating from the luminaire. These levels are indicated in Zumtobel Groups’s catalogues and specifications.

The diagram shows an example of possible efficacy losses within a luminaire. The levels may vary depending on changing materials and thermal conditions. In case of doubt, we recommend comparing the photometric data by means of lighting design software.

THERMAL MANAGEMENTEfficient thermal management is indispensable in order to achieve a long service life and to operate LEDs as efficiently as possible.

Not only will higher temperatures in the LED chip reduce service life; the efficiency of the LED chip, too, will decrease as temperature increases.

For reliable products with top efficiency levels – an absolute must for providing a 5-year guarantee – Zumtobel Group uses both highly efficient passive surface cooling, e.g. with PANOS INFINITY, and active systems with ventilator and SynJet™ membrane cooling. Yet reliable and efficient thermal management starts at an earlier point: during the development process, that is – which includes comprehensive tests and simulations in Zumtobel’s own laboratories.

A large heat sink alone cannot generally be considered a sufficient quality criterion for optimal thermal management. A thermal connection between board and heat sink must also be ensured. For this purpose, Zumtobel uses thermal pads or compounds as required.

Within the scope of quality processes, thermal connection of the LED chips to the boards is checked as well and compared with the LED manufacturer’s specifications.

This know-how available within the Zumtobel Group and at the individual plants, has enabled the Group to develop the 5-year guarantee. It emphasises the consistent principle of quality observed throughout the entire development and production processes of products.

135 – 165 % of luminaire luminous flux


100 % luminaire luminous flux

WRONG

WRONG

CORRECT

PANOS INFINITY 200infrared heat image



100 % luminaire luminous flux

WRONG

WRONG

CORRECT

PANOS INFINITY 200infrared heat image

The LDT files reveal the truth!Luminous flux of individual LEDs (specifications from LED data sheet)The data sheet specifications relate to 25 °C Tj (Tj = junction temperature) in the LED chip – between the junctions in the LED. However, the data sheets also include permissible Tj temperatures of 150 °C in some cases. During operation, high-performance LEDs get very hot. Heat however has a negative effect on both luminous flux and the service life of the LED.Luminous flux of the LED module (without optic etc.)In this case, the LED module is assumed to be similar to a lamp. The LED module thus has 100 % luminous flux. This value, however, has yet to be reduced by the loss in light output ratio.Luminaire luminous flux (incl. light output ratio losses) This information refers to the actual luminous flux of the luminaire, including any losses, for instance in the reflector etc.

ZUMTOBEL “STABLE WHITE”“Stable White” is a Zumtobel quality label for mixing chamber systems. In the LED sphere it comprises e.g. a maximum admissible colour drift of 5 MacAdams in the course of the service life of the LED. This makes the criteria somewhat more stringent than for fluorescent lamps, for instance, where even 5 MacAdams and more are possible when using different batches.

“Stable White” also stands for fixed colour temperatures of warm (e.g. 3000 K) and intermediate (e.g. 4000 K).

ZUMTOBEL “TUNABLE WHITE”“Tunable White” describes the option to dynamically change the light of the LED in the white light range, colour temperatures of e.g. 2700 K to 6500 K can be variably adjusted. In the process, the LED luminaires achieve a high colour rendering index of at least Ra 80 to Ra > 90.

COLOUR RENDERINGToday LED lighting solutions achieve high colour rendering in excess of Ra 90, and hence are more sophisticated than many solutions using fluorescent lamps. Even the colour rendering levels of discharge lamps are achieved, as are other technical lighting properties.

For its high-quality products, Zumtobel Group collaborates closely, sometimes exclusively, with other manufacturers of LEDs and LED modules, which guarantees integration of the latest technologies at an early stage of any new product development.

As regards the colour rendering of LEDs, the following indications are of key importance: normative colour rendering in the warmer colour temperature range is usually higher with single-chip-LEDs with a blue dye and yellow phosphor. Colours should be rendered as naturally as possible by choosing the corresponding phosphor mixes. For a cooler colour temperature, the phosphor mix is changed. LEDs with cooler light colours are normally more efficient, but their colour rendering index is also lower.

By mixing white light through LEDs of different light colours, excellent colour rendering can be achieved at simultaneously high efficiency.

2700

2700

3000

3000

3400

3400

4000

4000

4900

4900

6500

6500

Ra > 90

LED boardStable White

Ra 90

LED boardTunable White

2700

2700

3000

3000

3400

3400

4000

4000

4900

4900

6500

6500

Ra > 90


Ra 90


2700

2700

3000

3000

3400

3400

4000

4000

4900

4900

6500

6500

Ra > 90


Ra 90



QUALITY

Our expertise in meeting these goals is recognised internationally. Thorn Lighting is an active participant in developing International product (IEC), European (EN) and lighting (CIE, ISO) Standards, as well as local AS/NZ Standards.

QUALITY ASSURANCE (AS/NZS ISO 9001)All activities associated with providing a quality product - design, development, testing, production, despatch, customer service - are covered by each Thorn operation achieving compliance to an internationally recognised Quality System, ie AS/NZS ISO 9001, BSEN ISO 9000, EN ISO 9000 or ISO 9000.

All Thorn products from European design and production sites (in Austria, France, Germany, Sweden and UK) are manufactured to the highest standard. Each site is registered and operated under the quality management system EN ISO 9001 standard.

THIRD PARTY PRODUCT APPROVALSThird party approval requires independent endorsement that product design is in accordance with published standards, and that controls to maintain quality in manufacture are applied.

Thorn Lighting holds many third party approvals, such as the BSI Kitemark for luminaires and components. Many of our products carry other European Test House approvals. NATA test reports are internationally recognised and are considered as independent - third party test certification.

Thorn UK, under the BSI “Supervised Manufacturer’s Testing Laboratory” system contract number BSI 001, carries out compliance testing to BSEN ISO/IEC 17025 - “Operation of testing laboratories”. Furthermore Thorn UK photometric laboratory is a listed registered member of the BSI Registered Photometric Laboratory Scheme (No 003) and this ensures high quality of photometry measurement and production of data for all products.

Thorn Lighting selects and uses independent and/or in-house test facilities to provide the necessary level of compliance coverage for all aspects of lighting product performance and safety.

EUROPEAN MADE PRODUCTSFor European made luminaires and lighting components, European harmonisation of national approval marks has been achieved through introduction of the ENEC mark.

The ENEC mark can be awarded by any of the recognised European approval authorities, such as BSI, VDE, SEMKO, in the same way as a national approval mark. ENEC is important because it indicates that the product is suitable for use throughout Europe and that all of the most onerous special national conditions of test standards have been complied with.

In the case of lighting components such as ballasts, transformers, emergency lighting units etc. the ENEC mark indicates that both safety and performance standards have been complied with.

Thorn Lighting supported the introduction of the ENEC mark as a major advance in product certification and was the first UK Company to secure approvals under this demanding scheme.

The CE mark signifies that a product conforms to the requirements of relevant EEC directives. The prime purpose of the mark is to assist customs and market inspectors in facilitating the free trading and movement of products within the EEC. At this time the directives appropriate to general lighting products are the Low Voltage Directive (LVD), the Electromagnetic Compatibility (EMC) Directive and the Energy Efficiency (Ballasts for Fluorescent Lighting) Directive. CE marking is compulsory declaration of conformity to indicate that the products meet all relevant directives and requirements, eg. LVD, EMC and Ballast Efficiency.

The ENEC and CE mark has no legal standing within New Zealand other than as “an assurance of safety”. Thorn Lighting’s comprehensive compliance with all relevant standards, and implementation of systems to meet them, means its products comply with these European directives and the standards on which they are based.

ASSURANCE OF SAFETYNew Zealand has various “Electrical Safety Acts” and Australian Standard AS/NZS 3280

“Essential safety requirements for low voltage equipment” makes it unlawful to make, hold, or offer for sale any electrical appliance that is unsafe.

Thorn Lighting is committed to providing its customers with products and services that are of the highest quality. All Thorn Lighting products are designed and manufactured to ensure safety, reliability and performance. Quality ISO 9001

EMERGENCY LIGHTINGEmergency lighting is provided when the supply to the mains lighting fails. It helps people avoid panic, restores their confidence and guides them quickly and safely out of the building. Thorn Lighting offers a wide range of emergency lighting luminaires. These may be integrated standard luminaires or separate dedicated emergency units.

The requirements and operation of emergency lighting is governed by legislation, the Building code of New Zealand and Australian/New Zealand Standard AS/NZS2293. Operational performance to the standard is achieved by the thermal and photometric test to Appendix C & D. All “standard emergency products”

INGRESS PROTECTIONThe ingress protection (IP) code denotes the protection against dust, solid objects and moisture provided by the luminaire enclosure. If no code is marked the luminaire is deemed to be IP20.

INGRESS PROTECTION (IP) CODE(i) First digit of code denotes protection against

dust and solid objectsIP2X. No entry of standard test finger to live partsIP3X. No entry of >2.5mm Ø probe to live partsIP4X. No entry of >1mm Ø probe to live partsIP5X. Dust proof. (No dust deposit around live parts)IP6X. Dust tight (no dust entry)

(ii) Second digit of code denotes protect against moisture

IPX0. No special protectionIPX1. Protection against drops of condensed waterIPX2. Drip-proof (vertical falling drops of liquid)IPX3. Rain-proof (rain up to angles of 60°)

IPX4. Splash proof (spray from any angle)IPX5. Water jetIPX6. Strong water jetIPx7. Temporary immersion up to 1mIPX8. Long-term immersion to declared depth

IMPACT RESISTANCEThe use of Joules (Newton metres - Nm) has been common for many years. More recently an IK rating normally used for electrical enclosures and cabinets ( EN 50102:1995) has emerged as manufacturers apply it to their luminaires. The following chart compares both ratings.

Impact Resistance Rating Comparison

IK rating Joules of Energy IK rating Joules of EnergyIK01 0.15j IK06 1jIK02 0.23j IK07 2jIK03 0.35j IK08 5jIK04 0.5j IK09 10jIK05 0.7j IK10 20j

SAFETY CLASSIFICATIONS

Class I Luminaires in this class are electrically insulated and provided with a connection to earth. Exposed metal parts that could become live in the event of basic insulation failure are protected by earthing.

Class II These luminaires are designed and constructed so that protection against electric shock does not rely on basic insulation only. This can be achieved by means of reinforced or double insulation. No provision for earthing is provided.

EXPLANATION OF CLASSIFICATIONS

WORKING TO PREVENT LIGHT POLLUTIONGlare; the uncomfortable brightness of a light source and light trespass, the spilling of light beyond the boundary of a property, are other forms which can also cause physiological and ecological problems.

Thorn Lighting is committed to the application of better quality lighting. Properly designed luminaires and lighting schemes can substantially improve the quality of life.

Thorn uses efficient light sources and computer-optimised optics in its products in order to maximise the light output and enable precise control of the direction of the light. Thorn Lighting will continue to contribute to all learned bodies, ie. IES, The Lighting Society, CIE, working in favour of better lighting and to advise all its clients of the contribution that reducing glare and spill light makes towards better quality lighting and improving the lit environment.


OUR WARRANTYZG Lighting five year product warranty against defects (New Zealand only)

We warrant that, if used in accordance with their intended purpose, the products marketed under the trademarks “Zumtobel“, “Thorn” and “Thorneco” are free from manufacturing defects and/or defective material for the warranty period of five (5) years from the invoice date (or date of manufacture if invoice date is not known or available). This guarantee shall apply only to products delivered on or after October 1, 2015.

The warranty applies to all products sold by ZG Lighting (NZ) Ltd.

The warranty covers the products detailed above, provided that:

• The product is properly installed, and installation is consistent with the manufacturer’s instructions, and is installed by a suitably trained and qualified installer

• The product is not subjected to any unauthorised modifications

• The product is only used for the purpose of illumination, in line with its designated purpose or the designated purpose of a luminaire of its general type

• There is evidence that the agreed maintenance and operating conditions have been met as per manufacturer’s instructions and specifications

• Any faults or defects attributable to the misuse, abuse, accident or non-observance of the manufacturer’s instructions on the part of the user are specifically excluded

If a claim is made under this warranty and this warranty applies then we may, at our own discretion repair the product, replace the product with identical or equivalent product or refund the original purchase price of the product.

The warranty also covers reasonable labour cost and equipment hire incurred with removing, repairing and replacing defected products or components. The cover of labour will be only during normal business hours 7am - 4pm. The company will cover costs of necessary equipment that may be required such as scaffolding or lifts. The electrical contractor will be chosen by ZG Lighting (NZ) Ltd. In exceptional cases electrical contractors may be chosen by the customer in which case labour cost and equipment hire will only be covered by ZG Lighting (NZ) Ltd after a quote has been received and approved in writing.

The warranty does not apply to:• Any other ancillary costs incurred in connection with

remedying the defects (such as, for instance, disposal

of faulty or replaced product, mileage, travel time, callouts, third party supervisors and security personnel; such costs shall be borne by the customer

• Parts subject to wear, such as, for instance, all standard lamps, batteries and starters for luminaires with magnetic ballasts and hard drives; computers and servers containing either hard discs or mechanical parts subject to wear

• Likewise, software defects, bugs or viruses• Third party components or products which ZG Lighting

(NZ) sells separately (for instance, OEM lamps, ballasts or other componentry that are not fixed to or installed in the luminaire)

• Settings and/or parameterisations on facilities that vary on account of wear, fatigue, or dirt

• Logistics claims where damages are reported more than 3 months after despatch date from ZG Lighting (NZ) warehouses

• Products that have been shipped to and installed in a country other than Australia or New Zealand

In the event of the goods being replaced during the warranty period, the warranty on the replacement goods will expire on the same date as the warranty period of the original goods they are replacing.

All claims or enquiries made under this warranty shall be processed as follows:

1. Within 14 working days of becoming aware of an alleged fault, the customer must contact the company as detailed below.

2. The customer must provide a proof of purchase from the Supplier as well as photographic evidence of the reported fault.

3. If accepted as a valid warranty claim within the terms described in this document, ZG Lighting (NZ) Ltd will make suitable repairs, provide equivalent replacement product or refund the original purchase price of the product.

4. ZG Lighting (NZ) Ltd may request the customer to have goods returned for repair or further investigation.

5. In such cases (as item 4 above), the customer will be provided with a Goods Return Authority (GRA) number and ZG Lighting (NZ) Ltd will make arrangements for collecting the goods from the customer at a pre-determined date/time.

5 YEARGUARANTEE

When you purchase Thorn Lighting Products you can rest assured that every effort has been made to ensure that the quality product complies with all current New Zealand legislation.

Combined with Zumtobel Group’s 5 year warranty on all Thorn Lighting products, you can be assured that your lighting will be safe, compliant and provide quality lighting for years to come.

ENSURING LEGAL COMPLIANCE

CREDIT RETURN POLICY

ERROR WITH YOUR INVOICE

1. Should you find an error with your invoice, call our Customer Services line within 24 hours of receipt of the invoice.

2. Explain the error, detailing the invoice number and Thorn order number.

3. We will arrange a credit/debit adjustment to your invoice immediately.

DAMAGED GOODS

1. Phone our Customer Services line within 7 days of receipt of goods.

2. We will: a) have the goods inspected b) authorise the return for repair or replacement

3. We will prepare the goods return documentation and send to you within 24 hours.

4. If the goods are to be returned, please make sure the original Thorn Lighting packaging is still intact, with the correct documentation and our address.

ERROR WITH YOUR DELIVERY

1. Call our Customer Services line within 7 days of receipt of goods.

2. Explain the discrepancy in your delivery, quoting the packing slip and Thorn order number.

3. We will arrange to recover any incorrectly supplied product and supply the correct item.

STOCK RETURNS

Our conditions of sale are:

1. Goods specially made to order or indented for your purposes ARE NOT returnable. (See the relevant statement on your invoice/packing slip).

2. Where it is agreed that goods may be returned for credit, these may be subject to a restocking fee of up to 20%.

3. You must obtain a Goods Return Authorisation (GRA) from Customer Services before any goods can be returned. No credit will be issued without a GRA number.

4. Your returned goods must be accompanied by the GRA and will be credited after they have been received back into a Thorn branch and are confirmed to still be in a saleable condition.

Customer Services Line 0800 800 834

6. If, after review of claim or further inspection of goods, the claim is rejected, the customer will be provided with a full explanation, and if requested, the goods will be returned.

Our goods come with guarantees that cannot be excluded under the New Zealand Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Download our free app which has the latest contractor product ranges, ‘how to’ application design guides and details of where you can buy Thorn products. After one quick sync, you can view the app on the move without the need for internet connectivity.

Suitable for mobile and tablet.

Thorn Lighting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. The right is reserved to change specifications without prior notification or public announcement. All goods supplied by the company are supplied subject to the company’s General Conditions of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated.

Publication No: CG_NZ Publication Date: 02/20

Auckland - HeadquartersZG Lighting (NZ) Limited27 Jomac PlaceAvondale 1026T 0800 800 834E [email protected] thornlighting.co.nz

Wellington - Sales OfficeZG Lighting (NZ) LimitedLevel 2Thorndon QuayWellington 6011T 0800 800 834W thornlighting.co.nz

Christchurch - Sales OfficeUnit 7A303 Blenheim RoadUpper RiccartonChristchurch 8041T 0800 800 834W thornlighting.co.nz

THORN LIGHTING CONTRACTOR APP

For all Sales Enquiries/Orders/Returns please use the following email address: [email protected]

5 YEARGUARANTEE

thorneco

thorneco

THORNecoLED

Contact

New Zealand

Auckland – HeadquartersZG Lighting (NZ) Limited27 Jomac PlaceAvondale, Auckland 1026T. 0800 800 834E. [email protected]

Wellington – Sales OfficeZG Lighting (NZ) LimitedLevel 2225 Thorndon QuayWellington 6011New ZealandT. 0800 800 834

Christchurch – Sales OfficeZG Lighting (NZ) LimitedUnit 7A, 303 Blenheim RdUpper Riccarton, Christchurch 8041 New ZealandT. 0800 800 834

For all Sales Enquiries/Orders/Returns please use the following email address: [email protected]

thorneco.com

THORNeco is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. The right is reserved to change specifica-tions without prior notification or public announcement. All goods supplied by the company are supplied subject to the company’s General Conditions of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated.

Publication Date: 02/2020

member of zumtobel group

Meet the family

Introducing our range of best in class, economical LED luminaires. They’re the ideal

like-for-like replacements for all lighting sources - from circulation and meeting

areas, to storage facilities and car parks. Simple to install, longer lasting and energy

saving, you’ll be friends in no time.

Five year guarantee

BarryLED Batten

GeorgeLED High Bay

HarryLED High Bay

HenryLow Profile LED Luminaire

JulieIP65 LED Luminaire

LaraCircular IP65

Bulkhead

Coming soon

LeoHigh Power

LED Floodlight

RubyRecessed LED Panel

EveEmergency LED

Luminaire

LeonieLED Floodlight

EricLED Exit Luminaire

Barry

• Direct replacement for conventional battensin terms of light performance and length

• Reliable integrated LED technology, ensuringmaintenance-free installation and a longlifetime

• Homogeneous illumination

• High efficacy of 100 lm/W

• Choose between cool white (4000K) anddaylight (6500K) to suit application use

Light source information• 2400 lm (24 W), 4000 lm (40 W) and

6000 lm (60 W), 100 lm/W• 4000 K cool white LED or 6500 K daylight LED• 50 000 hour rated life (@L80B50, Ta 25 °C)• CRI 80• Beam angle: 120°• McAdam (initial): 5 step

LED Batten

Meet Barry Calm and composed, Barry blends perfectly into a range of indoor settings

Ideal for...

2400, 4000 and 6000 lumens, 100 lm/W

Corridors

50 000 hours lifetime

Save up to 60% energy compared with fluorescent battens

600mm (2400 lm), 1200 mm (4000 lm) and 1500 mm (6000 lm)

Warehouses Workshops

2h emergency version available

L

W

H

-300

30

60

120–120

–90 90

–60

150

0

–150±180

240

480

720

960

1200

Description Wt (kg) SAP Code

BARRY LED 600 2400 840 0.8 96631215

BARRY LED 1200 4400 840 1.6 96630490

BARRY LED 1500 6600 840 2.0 96630491

BARRY LED 1200 4000 865 1.6 96631439

BARRY LED 1500 6000 865 2.0 96631440

Emergency versions

BARRY LED 600 2400 840 EL2* 1.0 96631216

BARRY LED 1200 4000 840 EL2* 2.0 96630492

BARRY LED 1500 6000 840 EL2* 2.0 96630493

BARRY LED 1500 6000 865 EL2* 2.0 96631441

Material/FinishInstallation/MountingBody: steel, powder coated, white (RAL 9003)

Diff user: PC, IP40, opal whiteEnd caps: PC, white

• Surface mounting (screwsincluded)

• Class I electrical• IP20• IK08• Ambient operating

temperature: -20 to +40°CSTD, 0 to +25°C EL2

Specifi cation

Ordering guideLighting distributionBarry 4000 lm

cd/klm ULOR: 14% DLOR: 86% LOR: 100%

100 lm/W

L W H

BARRY LED 600 2400 840 600 66 69

BARRY LED 1200 4000 840 1200 66 69

BARRY LED 1500 6000 840 1500 66 69

*AS 2293 Emergency Classifi cation Barry 600mm: C0 = D50, C90 = C80Barry 1200/1500mm: C0= D80, C90 = D322 hour maintained LED emergency luminaire

George

• George offers a simple, direct and cost-effective one-for-one replacement oftraditional HID high bay luminaires

• Efficient LEDs (120 lm/W) combined with alens technology offering a beam angle of 90°to reduce waste light

• With a long 50 000-hour lifetime, Georgeeliminates the need for costly and disruptivelamp replacements

• The housing is carefully designed to allowair through the luminaire. This preventsthe components from overheating andensures optimum performance in industrialenvironments

• Supplied with 3 pin flex & plug (3m length)

Light source information• Lifetime 50 000 hours (@L70B50, Ta 25 °C)• 12000 lm (100 W), 18000 lm (150 W), 24000 lm (200 W),

30000 lm (250 W), up to 120 lm/W• Colour temperature: 4000 K• CRI 80 • McAdams (initial): 5 step

LED High Bay

Meet George Reliable, efficient and bright, George feels comfortable in high ceilings

12 000 – 30 000 lumens


90° beam angle

Ideal for...

IP65: Dust tight and water resistant

IK08 rated impact resistance

Save up to 50% energy compared to HID

WarehousesExhibition HallsRetail outlets

Material/FinishInstallation/MountingBody: Aluminum die-cast, black (RAL9017)

Lens: PC

• Single point suspension(mounting hook suppliedwith luminaire)

• Stirrup for wall/ceilingmounting (available asaccessory)

Ordering guide

Specifi cation• Class I electrical• IP65• IK08• Ambient operating

temperature: -30 to +50°C


GEORGE LED 330 12000 840 FP 1 3.40 96629086

GEORGE LED 330 18000 840 FP 2 3.80 96629087

GEORGE LED 390 24000 840 FP 3 6.00 96629088

GEORGE LED 390 30000 840 FP 3 6.00 96629089

Mounting brackets

SET OF GEORGE STIRRUP S 1 0.37 x 6 96629371

SET OF GEORGE STIRRUP M 2 0.37 x 6 96629372

SET OF GEORGE STIRRUP L 3 0.47 x 6 96629373

Lighting distributionGeorge 12000 lm


120 lm/W

-300

30

60

120–120

–90 90

–60

150

0

–150±180

3000

6000

9000

12 000

15 000

Body: Aluminum die-cast,

6913

8

330390

7615

1

123 The small numbers indicate how to match fi ttings and mounting brackets

Harry

Meet Harry Both strong and bright, Harry is ideal for logistics and warehousing• Harry offers a simple, direct and cost-

effective one-for-one replacement oftraditional HID high bay luminaires

• Efficient LEDs (130 lm/W) combined with alens technology offering a beam angle of 85°to reduce waste light

• With a long 50 000-hour lifetime, Harryeliminates the need for costly and disruptivelamp replacements

• The housing is carefully designed to allowair through the luminaire. This preventsthe components from overheating andensures optimum performance in industrialenvironments

• Supplied with 3 pin flex & plug (3m length)

Light source information• Lifetime 50 000 hours (@L70B50, Ta 25 °C)• 12 000 lm (93 W), 18 000 lm (139 W), 24 000 lm (185 W),

30 000 lm (230 W), up to 130 lm/W • Colour temperature: 5000 K• CRI 80 • MacAdams (initial): 5 step

LED High Bay

12 000 – 30 000 lumens


85° beam angle

Ideal for...



Save up to 50% energy compared to HID

WarehousesExhibition HallsRetail outlets

Material/FinishInstallation/MountingBody: Aluminum die-cast, black (RAL9017)

Lens: PC

• Single point suspension(mounting hook suppliedwith luminaire)

• Stirrup for wall/ceilingmounting and for rodsuspension (available asaccessory)

Ordering guide

Specifi cation• Class I electrical• IP65• IK08• Ambient operating

temperature: - 20 to + 50 °C


HARRY LED 260 12000 850 FP 2.40 96649613

HARRY LED 304 18000 850 FP 3.20 96649614

HARRY LED 370 24000 850 FP 4.30 96649615

HARRY LED 370 30000 850 FP 4.50 96649616

Mounting accessories

HARRY LED 260/304 STIRRUP 0.49 96649758

HARRY LED 370 STIRRUP 0.50 96649759

HARRY LED ROD MOUNT* 0.04 96649760

Lighting distributionHarry 12000 lm


130 lm/W

250500750

-300

30

60

120–120

–90 90

–60

150

0

–150±180

Material/FinishBody: Aluminum die-cast, black (RAL9017)

304

55

160

370

69

175

260

50

145

*Please note that the rod mount accessory must be fi xed to the relevant wallmounting stirrup (refer to instruction manual). Please order the relevant size stirrup when ordering the rod mount option.

Julie

Meet Julie With a tough exterior, Julie is the optimal choice for industrial and commercial applications

• High quality, low energy lighting in wetand dusty environments

• High quality opal diffuser for uniformlighting

• Ideal for replacement andrefurbishment projects

• 4000 lm (40 W), 6000 lm(60 W), up to 100 lm/W

• Colour Temperature 4000 K and 6000 K

IP65 LED Luminaire


Save up to 60% energy compared to T8 fluorescent


Lengths of 1232 mm and 1532 mm


Ideal for...


Car parks Workshops Underpasses Storage facilities

Light source information• Life time 50 000 hours (@L70B50, Ta 25 °C)• 4000 lm (40 W), 6000 lm (60 W), up to 100 lm/W• Colour temperature 4000 K and 6000 K• CRI 80 • McAdams (initial): 4 step

100200300

-300

30

60

120–120

–90 90

–60

150

0

–150±180

Ordering guide

Material/FinishInstallation/MountingCanopy: PolycarbonateDiff user: Opal polycarbonateBracket: Stainless steel

Suitable for surface mounting. 4 × 10 mm stainless steel self-tapping screws (not included) can be applied to prevent unauthorised opening of the luminaire.

Specifi cation• Class I electrical• IP65• IK08

Lighting distributionJulie LED 6000 lm



JULIE 600 LED IP65 1200 865 1.10 96628549

JULIE 600 LED IP65 1800 840 1.23 96628548

JULIE 1200 LED IP65 4000 840 1.50 96665577

JULIE 1200 LED IP65 4000 865 1.50 96628546

JULIE 1500 LED IP65 6000 840 1.95 96665580

JULIE 1500 LED IP65 6000 865 1.95 96628547

JULIE 1500 LED IP65 6000 840 COR MWS 2.35 96630236

Emergency versions

JULIE 1500 LED IP65 6000 840 E3 2.60 96665582

JULIE 1500 LED IP65 6000 865 E3 2.60 96631130

Spare part

JULIE LED Spare Mount Kit 96628409

100 lm/W

L W H

JULIE 600 LED IP65 1800 632 103 78

JULIE 1200 LED IP65 4000 1232 103 78

JULIE 1500 LED IP65 6000 1532 103 78

L

W

H

Lara

Meet Lara Sporting many different looks, Lara is the ultimate choice for a range of indoor and outdoor settings

• 800 lm LED (direct replacement for1 × 16 W 2D), 1200 lm LED and 2000 lm LED(direct replacement for 1 × 28 W 2D)

• Frosted diffuser ensures a homogeneouslight effect and visual comfort

• Sealed to IP65 for protected exteriorapplications

• Robust construction tested up to IK08impact resistance

• Optional trim accessories in 3 designs(bezel, eyelid and eyelid grille) and3 colours (black, white and silver)

• 2 Colours: white (RAL 9003) and black(RAL 9011)

• Optional: microwave presence sensormaximising the energy saving potential

Light source information• 2000 lm (20 W), 1200 lm (13 W), and 800 lm (10 W),

up to 100 lm/W

• 4000 K neutral white LED• Lifetime 50 000 hours (@L70B50, Ta 25 °C)• CRI 80

Circular IP65 Bulkhead

Ideal for...

800, 1200 and 2000 lumens, up to 100 lm/W

Save up to 70% energy compared with luminaires with 2D lamps

250, 300 and 330 mm diameter



Presence sensor

Public entrance areas

Underpasses

Circulation Corridors

Stairwells

100200300

-300

30

60

120–120

–90 90

–60

150

0

–150±180

Material/FinishInstallation/MountingBody: PolycarbonateDiff user: Polycarbonate

• Suitable for wall or ceilingmounting

• Quick and easy installation• Suitable for BESA fi xing

Ordering guide

Presence sensorLara’s microwave sensor option will ensure that light is only delivered when needed. The motion detection range and time duration is fully adjustable, with the additional benefi t of a daylight sensor for illuminance levels between 2 and 50 lux.

Lighting distributionLara 1200 lm


90 lm/W

000

Eyelid trimBezel trim WHBezel trim BLK Eyelid grille trimBezel trim SIL

Specifi cation• Class II electrical• IP65• IK08• ENEC certifi ed driver

Description Wt (kg) WH BLK SIL

LARA LED 250 800 840 0.7 96666101 96666102

LARA LED 300 1200 840 1.1 96666105 96666106

LARA LED 300 1200 840 E3 96666107 96666108

LARA LED 330 2000 840 1.3 96629752

LARA LED 300 1200 840 MWS 1.1 96666113

Accessories

LARA BEZEL TRIM SMALL 250 0.2 96666121 96666123

LARA BEZEL TRIM LARGE 300 0.2 96666122 96666124 96630073

LARA BEZEL TRIM X-LARGE 330 0.3 96630071 96630072

LARA EYELID TRIM LARGE 300 0.3 96666126

LARA EYELID GRILLE TRIM LARGE 300 0.3 96666128

MWS: Microwave presence sensorBLK: black; WH: white; SIL: silverE2: 2 hour maintained LED emergency luminaire. AS 2293 Emergency Classifi cation TBD

Ø300

68

Ø250

68

Ø330

68

1.2

Leo

Meet Leo Extremely powerful and resilient, Leo adds safety to dark areas

• 4 different lumen packages from 7500 to20 000 lm

• Asymmetrical light distribution – ideal forbuilding facades and footpaths

• Integrated photocell for automatic lightfrom dusk til dawn (can be activated/deactivated)

• Compact and streamline design

• Universal mounting bracket allows wallor ceiling mounting with the possibility oftilting upwards or downwards

• Surge protection up to 10 kV to protect theproduct from short high vol

contractor guide 2020 - thorn lighting...(4000k), both cri 80. katona is ip65 with protection...

Documents