Conventional Spray Guns& Accessories

A54-19R-15 8/99

In 1890, Binks pioneered the spray gun industry

with the introduction of the first cold-water paint spraying machine.

Today, you can find spray finishing

technology from Binks at work in

virtually every industry around the

world. In the many years that have

passed, Binks has grown to be a world

leader in the design and manufacture of finishing equipment, offering

products in the industrial and automotive refinishing markets.

The various spray guns and accessories shown in this

catalog represent a small part of Binks extensive product

line. Binks also manufactures and services air and

airless spray painting outfits, high and low pressure

material handling pumps, pressure tanks, paint

circulating systems, and much more.

Binks products are backed by a company with over

100 years experience in the spray refinishing market.

In addition, Binks operates foreign subsidary companies

in the United Kingdom, Continental Europe

Japan, and Australia.

If you would like more information about our products, please contact us

at our corporate headquarters in Glendale Heights, Illinois.

Phone # (630)-237-5000

About Binks . . . . . . . . . . . . . . . . . . . . . . . . 2

Conventional Air Spray Guns . . . . . . . . . . 3

Features and Benefits . . . . . . . . . . . . . . . . 4

Selecting the Right Air Spray Gun . . . . . . . 5

2001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

95SL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

95G Gravity . . . . . . . . . . . . . . . . . . . . . . . . 9

115 Touch-Up Gun

and Wren Airbrush . . . . . . . . . . . . . . . . 10

95A (Automatic) . . . . . . . . . . . . . . . . . . . . 11

21 Gun (Automatic) . . . . . . . . . . . . . . . . . 12

Binks Line-Striping Guns . . . . . . . . . . . . . 13

Airless Hand and Automatic Guns . . . . . . .14

Specialty Spray Guns . . . . . . . . . . . . . . . . 15

Spray Gun Extensions . . . . . . . . . . . . . . . 16

Pressure and Siphon Gun Cups . . . . . . . . 17

Air Nozzle Identification Guide . . . . . . . . 18

Fluid Nozzle Identification Guide . . . . . . 19

Nozzle & Needle Selection Chart . . . . . . . 20

Nozzle & Needle Selection Chart

460, 115 and Extensions . . . . . . . . . . . 21

Other Equipment & Accessories . . . . . . . . 22

System Solutions . . . . . . . . . . . . . . . . . . . . 23

Table of Contents

Conventional Air Atomizing Spray Guns

2

Atomizing MethodsExternal Mix guns mix and atomize

the air and fluid outside the air cap. Amethod for applying virtually any type ofmaterial, external mix atomization isperfect for high-quality finishing andfast-drying materials such as lacquer.

Internal Mix guns mix the air andmaterial inside the air cap. This makesthis type of spray gun well-suited for low-pressure, low-air-volume applicationsinvolving slow-drying finishingmaterials.

AirlessAirless spraying does not directly use

compressed air to atomize the coatingmaterial. A pump delivers paint to thespray gun under high hydraulic pressure(500 to 4500 PSI) to atomize the fluid.The fluid is then released through anorifice in the spray nozzle. This processincreases transfer efficiency andproduction speed with less overspray thanconventional air atomized spray. It is thefastest means of applying a coating. Insome cases, however, fine finishes cannotbe achieved.

Material Delivery MethodsPressure Feed systems are the perfect

solution for various finishingapplications: when you need to deliverlarge amounts of material to the finisharea, when fast application is requiredand when the material is too heavy to besiphoned from a container. Designed tohandle volumes of material up to 40 oz.per minute, pressure feed fluid flow isdependent on the air or pump pressure.

Suction Feed systems siphon materialfrom a cup attached to the gun. Designedto handle up to 14 oz. of material perminute, suction feed guns are ideal forapplications that involve frequent colorchanges and finishing jobs that requireonly small amounts of material.

Gravity Feed spray guns feature anattached cup on top of the gun. Materialfluid flow is created by gravity, whichallows the operator to make fineadjustments between the atomizingpressure and fluid flow, and utilizevirtually all material in the cup.

Conventional Air Atomizing Spray Guns

A spray gun is the key component inany finishing system – whether theapplication involves large-scaleindustrial finishing or delicateprecision painting.

The right tool for your application is aspecial combination of several factors.These include the delivery system andatomization method, as well as thegun’s air cap, fluid tip and needlecombinations. The best tool for the jobwill allow you to maximize the finishquality in a minimum amount oftime.

Your application also determines thetype of material container required.For continuous spraying and high-volume applications, material can bestored in large cups or tanks that rangein capacities from 2 quarts to 60gallons. Low-volume, touch-up anddetail spray finishing operations callfor smaller cups that attach directly tothe gun.

Type of Guns

Air AtomizingBinks air atomizing spray guns are

recommended when finish quality is ofthe utmost importance. Choose from awide selection, including: light duty (foroccasional maintenance and touch-upjobs), standard production (forconventional coatings), heavy duty (forspraying a wide range of coatings), andautomatic (for use with Binks spindleand reciprocating machines).

3

4

DurabilityDrop-forged aluminum gun bodies are strong, durable and lightweight.

Trigger strike pad makes trigger action smooth and extends air valve life.

Trigger is designed with reinforced wearpoints.

All gun components have been life cycle tested to ensure reliability in production environments.

Long-life needle packings.

Features and Benefits

•Anodized Drop-forged Aluminum Body

•Comfortable Grip Design

•Fluid Adjustment

•Spray Pattern Adjustment

•Rugged Construction yet lightweight

•Full Range of Air and Fluid Nozzles

PerformanceDual-seal fluid inlet assures a positive seal.

Lightweight and precision-balanced for operator comfort.Sized to fit both the operator and the application, in standard-size and mid-size models.Easy to Use

Large “two-finger” trigger provides light trigger action for easy operation and comfort.

Knurled knobs for easy adjustment of pattern and fluid flow.

1/4" air inlet connects to any standard compressor system.

MaintenanceSimple, straightforward design for easy care and maintenance.

Economical replacement parts are available and easy to install.

FeaturesReplaceable Spray HeadBroadest Range of Nozzles AvailableVery Comfortable GripSmooth OperationLightweight Low Cost

All spray guns utilize similar parts andcomponents to deliver the finishmaterials. These common elementsinclude the gun body, trigger, fluidnozzle and needle, air nozzle and baffle.

When the trigger is engaged, it makescontact with the air valve stem whichreleases the air. Then the trigger pulls theneedle out of the fluid tip, allowingmaterial to flow through the orifice of

the fluid tip where it is then atomized.Whenever the material flow is turned onand off, there is always atomized air atthe air cap.

Air Spray Gun Selection GuideThis chart will help you quickly assess

which air spray gun is suitable for yourspecific application. First, decide if youneed a manual or automatic gun, and

whether you need it for high or lowproduction volume. Then, under theheading that meets these criteria, find theusage description that best matches yourapplication. Complete information aboutthe recommended spray gun can befound on the subsequent pages (asreferenced in the chart).

Selecting Conventional Air Spray Guns

GUN MODEL USAGE/MATERIALS FEED TYPE BODY WETTED PARTS PG. REF COLUMN BY GUN

Manual Spray High Production - Conventional

2001 General Purpose Pressure Drop-forged Plated Brass2001SS Standard Finishes Siphon Aluminum Stainless Steel 6

WaterbornesMildly Abrasive/ Pressure Drop-forged

95/95V Corrosive Mtrls. Siphon Aluminum Stainless Steel 8General Purpose Pressure Drop-forged

95SL Standard Finishes Siphon Aluminum Stainless Steel 7Waterbornes

Mildly Abrasive/ Pressure Drop-forged95SLV Corrosive Mtrls. Siphon Aluminum Stainless Steel 7

Manual Spray Special Purpose

Detail, Touch-Up Pressure Drop-forged115 Standard Finishes Siphon Aluminum Plated Brass 10

Gravity Feed Drop-forged95G Standard Finishes Gravity Aluminum Stainless Steel 9

Automatic Spray

Most Common Pressure Drop-forged Stainless Steel95A/21 Materials Circulating Aluminum Plated Brass 11, 13

Stainless Steel95AV/ Pressure Drop-forged Tungsten Carbide21V Abrasive Materials Circulating Aluminum Nozzles 11,13

Compact Drop-forged460 Standard Materials Pressure Aluminum Stainless Steel 15

5

Most Popular Nozzle Set Ups:2001 Gun 66ss-66SD2001 Gun 63Bss-63PB2001 Gun 66ss-66SK2001 Gun 68ss-68PB

Standard Fluid Nozzle and Needle are 303 Stainless Steel

Technical Specifications:Body: Drop-forged anodized

aluminumWeight: 24 Oz.Air lnlet: 1/4" NPS (M)Fluid Inlet: 3/8" NPS (M)Fluid Passages: Brass/Electroless nickel

platedFeed Type: Pressure / Siphon FeedPart Sheet: 2316Gun Repair Kit: 6-229

Model 2001 The Model 2001 is compact,

lightweight, and well balanced. This,together with a specially designed grip,measurably improves operator controland handling comfort. With the largestselection of air nozzles in the industrybehind it, the Model 2001 will spray allconventional coatings, including highsolids.

The spray gun is precision machined,the body from forged anodizedaluminum alloy and the nickel platedhead from forged brass.

Model 2001 SSSame features as the Model 2001 Spray

Gun, but a stainless steel head is utilizedfor corrosive materials.

Model 2001VSame features as the Model 2001 Spray

Gun, but a tungsten carbide fluid nozzleand needle valve are used. For use withabrasive fluids.

2001 Gun

2001 Gun Outfits:❋

1 QT Siphon Cup 98-11032 Qt. Pressure Cup 98-10672 Qt. SG-2 Pressure Cup 98-12272 Gal. Non - ASME Tank (Adhesive Applications) 98-11802 Gal. Non - ASME Tank (Multicolor Applications) 98-359

❋Each outfit includes Air and Fluid Hose Assemblies

when required

6

95 SL Gun

Technical Specifications:Body: Drop-forged anodized

aluminumWeight: 20 Oz.Air Inlet: 1/4" NPS (M)Fluid Inlet: 3/8" NPS (M)Fluid Passages: Stainless SteelFeed Type: Pressure/Siphon FeedPart Sheet: 2731Gun Repair Kit: 54-4559

Most Popular Nozzle Set Ups:95 SL Gun 66ss-66SD95 SL Gun 63Bss-63PB95 SL Gun 66ss-66SK95 SL Gun 68ss-68PB

Standard Fluid Nozzle and Needle are 303 Stainless Steel

95 SL Gun Outfits:❋

1 QT Siphon Cup 98-11952 Qt. Pressure Cup 98-10622 Qt. SG-2 Pressure Cup 98-11962 Gal. Non - ASME Tank (Adhesive Applications) 98-10202 Gal. Non - ASME Tank 98-1126

❋Each outfit includes Air and Fluid Hose Assemblies

when required.

Model 95 SLVSame features as Model 95 SL Spray

Gun, but a tungsten carbide fluid nozzleand needle are used.

For use with abrasive fluids.

7

The 95SL Air Spray Gun is the newestaddition to the 95 family.

Designed as a production gun forgeneral industry, the new 95SL features aslimmer design and reduced weightfor smaller hands. This ergonomic,lightweight gun possesses greaterhandling capabilities and ease forincreased control with less fatigue.Following the same high standards set forearlier 95 series models, the 95SL has ahigh-strength aluminum alloy body,stainless steel fluid passages andexceptional atomization from Binks 60 Series air nozzles.

Efficient and VersatileThe 60 Series air and fluid nozzles used

on the 95SL spray gun are the finestatomizing nozzle combination available.Patterns from a 1-inch spot to a 16-inchwide band can be applied with equalquality and uniform coverage. Thestainless steel fluid passages resist a widerange of fluid chemistries making the95SL capable of spraying virtually anymaterial from waterbornes to solvent-based. Its adaptability to either siphon orpressure configuration leaves the 95SL ahighly versatile system.

Technical Specifications:Body: Drop-forged anodized

aluminumWeight: 27 Oz.Air Inlet: 1/4" NPS (M)Fluid Inlet: 3/8" NPS (M)Fluid Passages: Stainless SteelFeed Type: Pressure/Siphon FeedPart Sheet: 2625Gun Repair Kit: 54-3577

95 Gun

Most Popular Nozzle Set Ups:95 Gun 66ss-66SD95 Gun 63Bss-63PB95 Gun 66ss-66SK

Standard Fluid Nozzle and Needle are 303 Stainless Steel

Model 95 Model 95 is a high production spray

gun that can be used with most coatings.It provides superior performance andefficiency. The spray gun features allstainless steel fluid passages, 60 Series airand fluid nozzles, an extra wide trigger,large control knobs, and an ergonomicforged aluminum body. Available in avariety of manual and automaticmodels, the Model 95 Spray Gun is idealfor automotive OEM and industrialapplications, touch-up spraying,automated spray systems, and testcoating laboratories.

8

95G Gun (Gravity)

This spray gun is engineered withsprayer comfort, operating simplicity, and paint usage efficiency in mind. The 95G gun allows for quick paint refill,maximum paint usage and requires onlyone hose for operation, eliminating theneed for additional hoses andconnections used by pressure feedequipment.

Model 95G is equipped with a 1-1/3 Pint (.75 Liter) aluminum cup.Fluid nozzle and needle are constructedof stainless steel for greater fluidcompatibility with waterborne, solvent-based, ceramics, and wet-out jobs.

Ideal for automotive OEM, test labs,touch-up spraying, and small batchproduction spraying.

NOTE: L-Series Fluid Nozzles tend to minimize “smoking effect” at the air cap allowing for less fluid build-up at the air nozzle horns.* Tungsten Carbide Fluid Nozzle & Fluid Needle Tip.(Please Order Seperately.)▲ Fluid Flow in cc/minute. Divide above fluid flow by 29.6 to convert to fluid ounces (U.S.)NOTE: Pressure feed type nozzles are not recommended for use with Model 95G Gravity spray gun.

Nozzle and Needle Selection Chart For Model 95G Gravity Spray Gun

Technical Specifications:Body: Drop-forged anodized

aluminumWeight: 27 Oz. Air Inlet: 1/4" NPS (M)Fluid Inlet: 3/8" NPS (M)Feed Type: Gravity FeedPart Sheet: 2652Gun Repair Kit: 54-3589

TYPE OF FLUID FLUID AIR NEEDLE MAX. PATTERN CFM at FLUID FLOW at ▲TO BE SPRAYED NOZZLE NOZZLE VALVE AT 8´´ DISTANCE 20 PSI 30 PSI 40 PSI 20 PSI 30 PSI 40 PSI

Low to Medium65SS 66SD 865 11´´ @ 40 PSI 7.5 10.5 13.0 168 209 226

14-20 secs. Zahn 2 Cup 66SS 66SD 865 15´´ @ 40 PSI 7.5 10.0 12.0 244 290 350

Dyes, stains, lacquers, 66SS 66SK 865 15.5´´ @ 40 PSI 9.0 11.0 13.5 235 293 367

primers, waterborne coats, L5SS 66SD 865 11.5´´ @ 40 PSI 7.5 10.5 13.0

base coat, metallics L5SS 66SK 865 15.5´´ @ 40 PSI 9.0 11.0 13.5 Varies with

L6SS 66SD 865 15´´ @ 40 PSI 7.5 10.5 13.0 viscosities

L6SS 66SK 865 15.5´´ @ 40 PSI 9.0 11.0 13.5

Medium to High65SS 66SD 865 11.5´´ @ 40 PSI 7.5 10.5 13.0 176 223 263

19-30 secs. Zahn 2 Cup or 66SS 66SD 865 12´´ @ 40 PSI 7.5 10.0 12.0 205 244 275

Over 28 secs. No. 4 Ford Cup 66SS 66SK 865 15´´ @ 40 PSI 9.0 11.0 13.5 230 302 369

Urethanes, fillers, epoxies,

varnishes, lubricants, L6SS 66SD 865 12´´ @ 40 PSI 7.5 10.5 13.0 Varies with

shellacs, waterborne L6SS 66SK 865 15´´ @ 40 PSI 9.0 11.0 13.5 viscosities

fillers, top coats

Vitreous Enamels67VT* 67SK 867VT* Varies with

20-30 secs. Zahn 2 Cup 68VT* 68SA 868VT* viscosities

9

Most Popular Nozzle Set Ups:95G Gun 66ss-66SD95G Gun 66ss-66SK

95G Gun Accessories:54-4250 1-1/3 Pint (.75 Liter) Aluminum

Cup - Standard54-4376 1-1/3 Pint (.75 Liter) Teflon-Coated,

Aluminum Cup54-4450 1 Liter Aluminum Cup54-4457 8 Oz. Aluminum Cup54-4350 Gun Stand

Technical Specifications:Body: Drop-forged aluminumWeight: 8 Oz.Air Inlet: 1/4" NPS (M)Fluid Inlet: 1/4” NPS (M)Fluid Passages: Brass/Electroless nickel PlatedFeed Type: Pressure/SiphonPart Sheet: 2282Gun Repair Kit: 6-222

Model 115Small, lightweight precision touch-up

spray gun for fine finishes. Easy to use.Ideal for touch-up, shading, and spottingjobs. One piece drop-forged aluminumbody. Brass fluid passage insert. Overheadtrigger is curved to fit index finger. Self-adjusting brass air nozzle. Adjustablespray pattern.

Available with 81-540 eight ouncesiphon cup. Please order separately.

115 Touch-Up Gun and Wren Airbrush

115 Gun Accessories:81-540 8 Oz. Siphon Cup (Metal)81-384 8 Oz. Siphon Cup (Plastic)

Most Popular Nozzle Set Ups:115 Gun 78ss-78SD115 Gun 78ss-78S

The Wren airbrush is single-actionstyle. Air and fluid are deliveredsimultaneously. The fluid delivery iscontrolled by rotating the fluid nozzle toallow more fluid to be siphoned into theair stream. Simple to operate and easy tomaintain, the Wren produces excellentresults. Because there are different typesof nozzles for Wren airbrushes, it isimportant to consider the type of workbeing done, the fineness of the linedesired, and the kind of materials beingsprayed when selecting an airbrush.

Select the airbrush best suited for your application from the following three models:“A” Small nozzle opening for fine lines. For use with inks, stains, dyes, etc.(Interchanges with “B” or “C”).

“B” Larger nozzle opening for use withthinned lacquers, enamels, etc.(Interchanges with “C” airbrush).“C” Largest nozzle opening for ceramicunder glazing, thinned overglazes, andother applications not requiring finecontrol. (Interchanges with “B” airbrush).Part Sheet 1541 - Bulletin A59-17

Wren Outfits

10

Set No.1 Includes Airbrush, 1/2 Fl. Oz. Color Bottle

Model No. 59-10003 “A” Airbrush

Model No. 59-10004 “B” Airbrush

Model No. 59-10022 “C” Airbrush

Set No.2 Includes Airbrush, 1/4, 1/2 , and 2 Fl.Oz.

Color Bottle Assemblies, 6 Ft. Lightweight

Vinyl Hose with Connections and case.

Model No.59-10005 “A” Airbrush

Model No.59-10006 “B” Airbrush

Model No.59-10023 “C” Airbrush

Model 95A (Automatic)A conventional style air spray gun that

is pneumatically activated for applicationswith reciprocating, rotary, spindlemachines, and in stationary spray gunset-ups. Exceptionally rugged, the Model95A is designed to stand-up under hard,continuous use. 60 Series air and fluidnozzles are used in this spray gun. The 60Series nozzles provide spray patterns froma one inch spot to a wide fan withuniform coverage. All fluid contactsurfaces within the spray gun, includinginlet, nozzle and needle, are constructedof stainless steel for use with waterborneas well as conventional coatings.

Most Popular Nozzle Set Ups:95A Gun 63Bss-63PB95A Gun 62ss-66PE95A Gun 66ss-66SD95A Gun 63Ass-63PB

Standard fluid Nozzle and Needle are 303Stainless Steel

95A Technical Specifications:Body: Drop-forged anodized

aluminumWeight: 20.5 Oz.Cylinder Air Inlet: 1/4" NPS (M)Cylinder Air Pressure: 40 PSI Min.

100 PSI Max.Atomization Air: 1/4” NPS (M)Fluid Inlet: 3/8" NPS (M)Fluid Passages: Stainless SteelFluid Pressure: 100 PSI Max.Mounting Hole: 1/2"Part Sheet: 2641Gun Repair Kit: 54-3579

95 A (Automatic Guns)

11

95A

95AR

Model 95AVSame features as Model 95A Spray Gun,

but a tungsten carbide fluid nozzle andneedle are used.

For use with abrasive fluids.

Model 95ACSame features as Model 95A Spray Gun,

but with re-circulating fluid inlet.

Model 95ARSame features as Model 95A Spray Gun,

but has ratchet type adjustable needlevalve control.

Recommended for installationsrequiring numerous fluid controladjustments.

1/2” Dia. Gun Mounting

1” Diameter

Gun Cover

Accessories:Mounting Bracket 54-380Gun Covers 54-3691 (Package of 20)

21 Gun (Automatic)

Most Popular Nozzle Set Ups:21 Gun 63Bss-63PB21 Gun 68ss-709ss

(line-striping applications)21 Gun 66ss-66SD21 Gun 59Css-262

(line-striping applications)

Standard fluid Nozzle and Needle are 303 StainlessSteel

Model 21 VSame features as Model 21 Spray Gun,

but a tungsten carbide fluid nozzle andneedle are used.

For use with abrasive fluids. Accessories:Mounting Bracket 54-380Gun Covers 54-3691 (Package of 20)

21 Technical Specifications:Body: Plated BrassWeight: 41 Oz.Cylinder Air Inlet: 1/4" NPS (M)Cylinder Air Pressure: 40 PSI Min.

100 PSI Max.Atomization Air: 1/4” NPS (M)Fluid Inlet: 3/8" NPS (M)Fluid Passages: Brass/Electroless

Nickel PlatedFluid Pressure: 100 PSI Max.Mounting Hole: 1/2"Part Sheet: 1143Gun Repair Kit: 6-191

Model 21Heavy duty pneumatically operated

gun for spraying all conventionalcoatings. Recommended for rotary,reciprocating, and spindle machines.Drop forged brass plated body. Adjustablestainless steel fluid needle. Adjustablespray pattern controlled at side of gunhead. Gun controlled remotely withthree-way valve.

12

1/2” Dia. Gun Mounting

1” Diameter

Gun Cover

Line-Striping Spray GunsReliability • Versatility • Value

13

Improve and expand your line-stripingcapabilities with our automatic guns.Designed to mount on almost all typesof line striping equipment, each is apneumatically operated gun built forheavy-duty service.

Model 30Delivers glass beads at a rate of up to

20 lbs. Per minute. The gun is triggeredon and off by an air piston located at the rear of the gun body. Minimumrecommended air pressure for driving the piston is 50 PSI. Atomization air is not required. The gun is furnishedwith four nozzle inserts having orificediameters of 7/32”, 1/4”, 9/32”, and11/32” respectively. 1/4” NPS(m) airinlet. 3/4” NPS(m) glass bead inlet.Actual wt. 6 lbs. 1 oz. Part sheet 2151.

Model 21 MHeavy duty, pneumatically operated

gun for spraying all conventionalcoatings. Drop-forged, brass-plated body.Adjustable stainless steel fluid needle.Adjustable spray pattern control at side of gun head. Replaceable gasket fluidnozzle seal. Gun controlled remotelywith three-way valve. Requires 35 PSI airpressure to trigger. Up to 250 cycles perminute. 3/8” NPS (m) fluid inlet. 1/4” NPS (m) air connections. 1/2 inchdiameter mounting hole. Shipping wt. 3 lbs. Actual wt. 2 lbs. 9 oz. Part sheet 1143.

Model 33SSHeavy duty high volume gun for use on

automatic road striping machines. Canbe used at vehicle speeds of 15 to 25m.p.h. Brass body and stainless steelhead. Stainless steel fluid needle valve.Hardened steel fluid nozzle. Optionalnitralloy, hardened steel, or tungstencarbide air nozzle. A port of catalystinjection in the atomizing air is included.Pneumatic operated trigger opens at 45PSI. Optional round or fan spray nozzle.1/2” NPS (m) fluid inlet. 3/8” NPS (m)atomizing air inlet. 1/4” NPS (f) cylinderair inlet. Shipping wt. 7 1/4 lbs. Actual wt. 6 lbs. 1 oz. Part sheet 1441.

Model 30 Bead Gun

Model 21 Gun

For spraying protective coatings suchas lacquers, enamels, water-basedemulsions, mold release agents, andsound deadeners. Spray gun equippedwith tip guard, stainless steel fluidpassages, and forged aluminum spraygun body. Actuating air pressure is 40-60 PSI. The material body may beinstalled in any of four positions tofacilitate fluid hose connection. Spraynozzle not included, order separately.Mounting hole is 1/2” diameter,furnished with set screw. (Maximumoperating pressure is 3000 PSI.)

Specifications:Air Inlet: 1/4” NPS (m)Fluid Inlet: 1/4” NPS (m)Weight: 1 1/2 lbs.Part Sheet: 2120

Same as Model 550, but constructedwith larger fluid inlet and passages.Used for spraying heavy materials suchas mastics and undercoatings. Spraynozzle not included, order separately.(Maximum operating pressure is 3000 PSI.)

Specifications:Air Inlet: 1/4” NPS (m)Fluid Inlet: 1/2” NPT (f)Weight: 2 1/2 lbs.Part Sheet: 2122

Model 550 Model 570

Heavy duty professional spray gun forapplying various maintenance anddecorative finishes.

This lightweight, aluminum-bodied,drop-forged, spray gun features astainless steel head and fluid passages,ball-type fluid valve, removable valveassembly, tungsten carbide seat, andbuilt-in diffuser.

A large rest pad at the back of the spraygun gives excellent operator comfort, in-the-hand support and balance. Thethumb-operated safety trigger lockpermits one hand locking, unlocking,and triggering. A tip guard is included foradded safety. Spray tip not included, orderseparately. (Maximum operatingpressure is 6000 PSI.)

Part Sheet: 2340

Airless 1

Airless Hand and Automatic Spray Guns

14

SURFACE COATING FAN WIDTH ORIFICE SIZE(in inches) .009 .011 .013 .015 .017 .019 .021 .023 .036

Wood Interior Stain, Sanding Sealer 6” 309 311 313 - - - - - - Cabinets, Paneling Lacquer, Varnish, 8” - - 413 - - - - - -

Shellac, EnamelsInterior Walls Latex, Vinyl 8” - - - 415 417 419 - - - Ceilings, Drywall, Acrylic 10” - - - 515 517 519 - - - Plaster 12” - - - 615 617 619 - - - Overhang Primers, 6” - - - 315 - - - - -

Enamels 8” - - - 415 417 - - - - Vinyl 10” - - - 515 517 - - - -

12” - - - - - 619 - - - Masonry Block, Acrylic, Latex, 8” - - - - 417 - - - - Stucco, Concrete Oil Base, Aklyds 10” - - - - 517 519 521 - -

12” - - - - - - 621 - - Wood Exterior Exterior, Stains 10” - - - - 517 519 521 - - Shingle Siding, Shiplap Latex, Vinyl, Acrylic 12” - - - - - - 621 - - Open Joist MIL White 6” - - - - - - - - 336Ceiling Areas HI Build 8” - - - - - - - - 436

10” - - - - - 519 521 523

Note: Order using 354-, then the three digit number with proper fan width and orifice opening, Example 354-517.

Twist-Tip Base Retainers (Part Sheet 2613)Assembly 354-3 354-5 354-6

Number 3/4”-20 7/8”-14 11/16”-16

Binks Graco AM Spray

Titan Spray Tech

Wagner Wagner

Note: Tip size is coded into listed part no. below

Example: 354-5 17 “17” = .017 orifice

“5” x 2 = 10” fan

Designed for continuous spraying of heavy bodied fluids. Drop-forgedaluminum body. Replaceable plateddrop-forged brass head. Adjustablefloating fluid needle valve. Stainless steelair valve cartridge. Trigger has hardenedsteel wear plate. Adjustable spray pattern.

Specifications:Air Inlet: 1/4” NPS (m)Fluid Inlet: 1/2” NPS (m)Weight: 1 lb. 14 oz.Part Sheet: 2670

Designed for spraying heavy bodiedfluids such as roof coatings, block fillers,and similar materials. Drop-forgedaluminum body. Extra large fluidpassage in plated drop-forged brass

head. Adjustable floating needle valveand stainless steel air valve cartridge.Hardened steel four finger trigger.Controls at back of the spray gun.

Non-adjustable spray pattern.Specifications:Air Inlet: 3/8” NPS (m)Fluid Inlet: 3/4” NPS (m)Weight: 1 lb. 14 oz.Part Sheet: 1341

Model 7D Model 7E2

Use for spraying solvents to cleanengines and other machinery. Brass body.Ten inch nozzle/tube length. Has flexibletubing with hose clamp for siphoningsolvent from container. Requires 14 CFMair at 50 PSI. 1/4” NPS (m) air inlet.

Part Sheet: 1191

Use for dusting, drying, removingchips, etc. Pistol grip style withaluminum die cast body. Nozzle number

Model 140B

Model 190

Specialty Spray GunsHeavy Duty Guns

Air Blow Gun

60-40 (complies with paragraph 50-204 Walsh-Healy Alt and OSHA where air inlet does not exceed 100 PSI) with 1/16” orifice is standard. Optional 5 1/2” extension (60-41) available. 1/4” NPT (m) air inlet. Air consumption 3 1/2 CFM at 50 PSI.

Part Sheet: 1108

15

Model 460 Mini-Automatic Gun

valve. Dual air controls, one for spraypattern and one for atomizing air. May be operated by remote 2- or 3-way valve.Optional spray pattern depending uponnozzle selected. Specifications:Air Inlet: 1/4” NPS (m)Fluid Inlet: 1/4” NPS (m)Weight: 6 oz.Part Sheet: 2019

NOTE: Specify fluid and air spray nozzle setup

when ordering air spray gun. See page 21.

Lightweight, small gun for precisionfinishing of small parts. Forgedaluminum body. Stainless steel fluidnozzle. Adjustable stainless steel needle

CLEARANCEMODEL DIAMETER NOZZLE SET-UP OPTIONAL LENGTHS FOR GUN PART SHEET

(INCHES) (INCHES) MODEL REFERENCE

Nozzle Extensions designed to reach out-of-the-way places. Models for general use and for specific applications. Use for conventional coatings with sprayguns as listed. Note: When ordering, specify spray gun model that extension is to be used with and specify nozzle set-up. All extensions furnished withstainless steel needles. See Price List 945 for individual extension part numbers.

1 3/4 Std. External or 6, 9, 12, 15, 18, 24, 2001 1368Internal Mix* 30, 36, 48, 60, 72, 84 95, 95A 2659, 2660

7/8 External or 6, 9, 12, 15, 18, 24, 2001 1369Internal Mix* 30, 36, 48, 60, 72, 84 95, 95A 2659, 2660

3 Std. External or 6, 9, 12, 15, 18, 24, 2001 1370Internal Mix*✝ 30, 36, 48, 60, 72, 84 95, 95A 2659, 2660

1 7/8 External or 6, 9, 12, 15, 18, 24, 2001 1371Internal Mix* 30, 36, 48, 60, 72, 84 95, 95A 2659, 2660

2 1/2 Std. External or 6, 9, 12, 15, 18, 24, 2001 1372Internal Mix*✝ 30, 36, 48, 60, 72, 84 95, 95A 2659, 2600

1 3/4 External or 6, 9, 12, 15, 18, 24, 2001 1373Internal Mix* 30, 36, 48, 60, 72, 84 95, 95A 2659, 2660

1 7/8 External or 6, 9, 12, 15, 18, 24, 2001 1374Internal Mix* 30, 36, 48, 60, 72, 84 95, 95A 2659, 2660

3/4 Circular (360°) 6, 9, 12, 15, 18, 24, 2001 136730, 36, 48, 60, 72, 84 2082

95, 95A 2659, 2660

3/8 Circular (360°) 9, 12, 15, 18, 21, 27, 2001 132833, 39, 51, 63, 75, 87 95, 95A 2659, 2660

1/2 Circular (360°) 6, 9, 12, 15, 18, 24, 2001 148836, 48, 60, 72, 76, 80 95, 95A 2659, 2660

7/16 Round 6, 9, 12, 15, 18, 24, 2001 1328(Not Adjustable) 30, 36, 48, 60, 72, 84 95, 95A 2659, 2660Same as for Models

1 1/8 C and HC except 6, 9, 12, 15, 18,nozzles have tungsten 24, 30, 36, 43 1/2 2083carbide inserts 48, 60, 72, 84 2001

95, 95A 2659, 2660

1 3/8 Special for Pipe Interior 1/4 in. Pipe not included Gun not requiredCircular 360°

3/4 Circular 360° 5/16 in. I.D. fluid hose & 2001clamps not included

* See Nozzle and Needle Selection.

✝ Extension is available with stainless steel fluid nozzle having tungsten carbide insert. Specify “VT” when ordering.

See nozzle setup table.

E

EA

EB

EBX

EN

ENX

ERX

S

M

S

52-

52-

CVT

C

Spray Gun Extensions

16

Pressure Cups

Model 80-350 (shown above)SG-2 (Steadi-Grip 2) Two Quart pressure cupPart Sheet 2658

Model 80-351 (shown above)SG-2 (Steadi-Grip 2) Two Quart pressure agit cupPart Sheet 2658

Accessories for Steadi-Grip 280-355 Disposable liner for 80-350

and 80-35180-356 Quantity pack of 12 disposable

liners for 80-350 and 80-35180-392 Thiokol gasket for 80-350

and 80-351

EZ2 Solvent Saver CupModel 81-540 Eight Ounce clamp typeShipping weight 8 oz.1/4” NPS (f) Part Sheet 126172-55 AdapterFor 3/8” NPS (f) connection to spray gun

Model 81-543 (not shown)Stainless steel Eight Ounce 3/8” NPS (f) outletPart Sheet 2679

Model 81-550 One Quart

clamp type. Shipping

weight 16 Ozs

3/8” NPS (f)

Part Sheet 2250

Model 82-361

(not shown)

One Quart stainless steel

Model 80-228 Two Quart “Steadi-Grip”with handle. Shipping weight 3.5 lbs.Part Sheet 1619

Model 80-270Fifty Ounce stainless steelpressure cup

Model 80-300One Quart stainless steelpressure cup and15 PSI regulator

Model 80-210One Quart. Furnished with pressure regulator and gauge 50 PSI max. Shipping weight 3 lbs. Part Sheet 1149

Spray Gun Cups

17

Steadi-Grip 2 Cups

Siphon Cups

Siphon Cups (cont.)

Model 81-350

One Quart DripProof

clamp type with extra

vent tube. Shipping

weight 16 0zs.

3/8” NPS (f)

Part Sheet 2250

Cup features exclusive non-stick coatinginside and out that wipes clean inseconds. Fits Spray Gun Models 95, 2001,and the MACH 1 Series of handguns.• Model 81-375One Quart DripProof• Model 81-575One Quart StandardPart Sheet 2378

Air Nozzle Identification Guide

18

Low CFM And Low Viscosity MaterialsCFM AT MAXIMUM

AIR NOZZLE TYPE REMARKS 50 PSI PATTERN SIZE

63P PE Low CFM Capacity, Medium to Narrow Fan Width 5.1 5"

66S SE Low CFM Capacity, Siphon Nozzle 5 9”

Medium Viscosity Material

CRM AT MAXIMUMAIR NOZZLE TYPE REMARKS 50 PSI PATTERN SIZE

63PB PE An excellent “general purpose” nozzle, used 14.3 14”

with wide range of materials

63PH-1 PE High volume delivery nozzle, anti “fogging,” wide 15.5 18”

fan width. Use with high solids materials, very wide pattern

63PR PE High production nozzle 15.5 18”

64PA PE Used for vitreous enamels and other abrasive materials 18.2 13”

66SD-3 PE Best air nozzle for adhesive applications 15.4 9”

66PE PE High production, high volume delivery nozzle 15 17”

66PH PE Used with high solids, vitreous enamels 16.4 16”

66SD PE An excellent “general purpose” siphon nozzle, use 12.1 11”

with wide range of materials

High Viscosity Materials

CRM AT MAXIMUMAIR NOZZLE TYPE REMARKS 50 PSI PATTERN SIZE

67PB PE An excellent “general purpose” nozzle for 14.9 12”

heavier viscosities of materials

67PD PE Used for Zinc rich and other abrasive coatings 15 15”

68PB PE An excellent “general purpose” nozzle where a high 14.1 12”

volume and heavier viscosity materials are required

66SK PE An excellent “general purpose” siphon nozzle, wide 15.2 13”

pattern with higher fluid, delivery, used with wide range

of materials

Internal Mix Air Nozzles

CRM AT MAXIMUM AIR NOZZLE

AIR NOZZLE TYPE REMARKS 50 PSI PATTERN SIZE

101 PI Tungsten Carbide, Used with highly abrasive materials 6.8 11”

190 PI Tungsten Carbide, Used with road marking materials 11.5 9”

200 PI Primarily used for multi color applications 5.2 14”

201 PI Primarily used for light text materials 6.8 11”

206 PI Primarily used for multi color applications,light texture 9.5 19”

390ss PI SS, used with road marking materials on truck mount guns 11.5 9”

391ss PI SS, used with road marking materials on truck mount guns 10.5 11”

709ss PI Primarily used with push behind line stripers 5.75 8”

Note: PE - Pressure External SP - Siphon External PI - Pressure Internal* For other Air nozzles see charts on page 20

For Internal Mix Air Nozzles, Please Order Base And Ring Separately. See Diagrams Below.

JAJ1SSJ2SS

33SS33BSS35SS36SS38SS

44SS45SS46SS47SS49SS

57SS58SS59ASS59BSS59CSS

.043

.082

.043

.040

.046

.059

.070

.086

.187

.250

.312

.375

.500

.218

.281

.171

.218

.281

1.12.11.1

1.01.21.51.82.2

4.76.47.99.5

12.7

5.567.14.35.57.7

.6

.6

.71.01.21.31.3

1.61.51.82.22.22.82.84.4

1.01.31.8

1.0

.022

.022

.028

.040

.046

.052

.052

.064

.059

.070

.086

.086

.110

.112

.172

.040

.052

.070

.040

61SS62SS63SS

63ASS63BSS63CSS63CVT‡

64VT‡65SS66SS67SS67VT‡68SS68VT‡69BSS

76SS77SS78SS

794SS

NOZZLENUMBER

NOZZLENUMBER

ORIFICE SIZE(INCHES)

ORIFICE SIZE(INCHES)

MMORIFICE SIZE

MMORIFICE SIZE

Fluid Nozzle Orifice Size

‡ Stainless steel with tungsten carbide insert.

Fluid Nozzle Identification Guide

19

Flow Rates for Fluid Nozzles

ID SIZE FLOW RATEFLUID NOZZLE IN. (MM) OR MATERIAL

Pressure Feed

63ss .028” (0.7) Up to 12 oz./min.63Ass .040" (1.0) Up to 20 oz./min.63Bss .046" (1.2) Up to 25 oz./min.63Css .052" (1.4) Up to 28 oz./min.64VT .064" (1.6) Abrasive enamels66ss .070” (1.8) 40 oz./min. and over67ss .086 “(2.2) Heavy-body materials67VT .086” (2.2) Abrasive/Heavy-body materials68ss .110” (2.8) Heavy-body materials

Siphon Feed

66ss .070 (1.8) Up to 12 oz./min.

20

VERY THIN14-16 secs. Zahn 2 Cup 63ss x 63P PE 4.5 7.5 10 5 863 663 763 563 263Wash primers, dyes, 63Bss x 63PB PE 9 14.3 20 14 863A 663A 763A 563A 263Astains, solvents, 66ss x 66SD SE 7.9 12.1 — 10.5 865 665 765 565 265water, inks 66ss x 66SK SE 11 15.2 19.5 13 865 665 765 565 265

63Bss x 200 PI 3.1 5.2 6.4 12 863A 663A 763A 563A 263ATHIN16-20 secs. Zahn 2 Cup 63Ass x 63P PE 5.1 8.37 12.2 11 863A 663A 763A 563A 263ASealer, lacquers, 63Bss x 63PE PE 9.5 15 20 13 863A 663A 763A 563A 263Aprimers, inks, lubricants 66ss x 66SK SE 11 15.2 19.5 13 865 665 765 565 265zinc chromates, acrylics 63Bss x 200 PI 3.1 5.2 6.4 12 863A 663A 763A 563A 263AMEDIUM19-30 secs. Zahn 2 Cup 63Bss x 63PB PE 9 14.3 20 14 863A 663A 763A 563A 263ASynthetic enamels, 63Css x 63PE PE 9.5 15 20 13 863A 663A 763A 563A 263Avarnishes, shellacs, fillers, 66ss x 66SD SE 7.9 12.1 — 11 865 665 765 565 265primers, epoxies, 66ss x 66SK SE 11 15.2 19.5 13 865 665 765 565 265urethanes, lubricants, 63Css x 200 PI 3.1 5.2 6.4 12 863A 663A 763A 563A 263Awax emulsions, enamelsHEAVY(Cream-like) 67ss x 67PB PE 9.5 14.9 19.5 12 867 667 767 567 267Over 28 secs. 68ss x 68PB PE 9.5 14.1 19.1 12 868 668 768 568 268No. 4 Ford Cup 67ss x 206 PI 6 9.5 13 15 867 667 767 567 267VERY HEAVYTexture coatings, 68ss x 68PB PE 9.5 14.1 19.1 12 868 668 768 568 268Road marking paint 68ss x 206 PI 6.2 9.8 13.2 15 868 668 768 568 268

59Ass x 244 PI 7.8 11.5 15.2 12 859 659 769 569 25959Ass x 245 PI 7.8 11.5 15.2 6 859 659 769 569 25959Bss x 251 PI 7.8 11.5 15.2 12 859 659 769 569 25959Bss x 252 PI 7.8 11.5 15.2 6 859 659 769 569 25959Css x 262 PI 7.3 11 14.7 6 859 659 769 569 25968ss x 206 PI 6.2 9.8 13.2 15 868 668 768 568 268

ADHESIVESWaterbase white vinyl glues 63Bss x 66SD-3 PE 7.9 12.1 16.2 4 863 663 763 563 263Solvent base, neoprenes 67ss x 67PB PE 9.5 14.1 19.1 12 867 667 767 567 267

(contact cement) 66ss x 66SD-3 PE 7.9 12.1 16.2 10 865 -- -- -- --CERAMICSSimilar abrasive materials, 67VT x 67PD PE 10 15 20 15 867VT 667VT 767VT 567VT 267VTglazes, engobes, 68VT x 68PB PE 9.5 14.1 19.1 12 868VT 668VT 768VT 568VT 268VTporcelain enamelBUFFING COMPOUNDS

64VT x 64PA PE 12.1 15 21 13 864VT 664VT 764VT -- 264VT67VT x 67PD PE 10 15 20 15 867VT 667VT 767VT -- 267VT

CONCRETE CURINGCOMPOUNDS 66ss x 200 PI 3.1 5.2 6.4 15 865 665 765 565 265

67ss x 206 PI 6 9.5 13 18 867 667 767 567 26768ss x 206 PI 6.2 9.8 13.2 20 868 668 768 568 268

MULTICOLOR PAINTS66ss x 200 PI 3.1 5.2 — 12 865 665 765 565 26567ss x 206 PI 6 9.5 — 15 867 667 767 567 267

TEFLONS63Ass x 63PB PE 9 14.3 20.1 10 863A 663A 763A 563A 263A66ss x 66SD PE 7.9 12.1 — 7 865 665 765 565 265

HAMMERS63ss X 63PB PE 9 14.3 — 14 863A 663A 763A 563A 263A66ss X 63PB PE 9 14.3 — 14 865 665 765 565 26566ss X 66SD PE 7.9 12.1 — 7 865 665 765 565 265

WRINKLE ENAMELS63Css x 63PB PE 9 14.3 20 10 863A 663A 763A 563A 263A66ss x 63PB PE 9 14.3 20 10 865 665 765 565 265

ZINC RICH COATINGS66ss x 67PD PE 12 18 24 15 865 665N 765 565N --67VT x 67PB PE 9.5 14.1 19.1 12 867VT 667VT 767VT 567VT 267VT

Note: PE - Pressure External SP - Siphon External PI - Pressure Internal

TYPE OF FLUID FLUID NOZZLE CFM AT MAX. FLUID NEEDLE NUMBERS FOR SPRAY GUN MODELSTO BE SPRAYED X AIR TYPE 30 50 70 PATTERN

NOZZLES PSI PSI PSI AT 8” 95SL 95 95A & 95AR 2001 21

Nozzle and Needle Selection Charts

21

CFM AT MAX. PAT.

TYPE OF FLUID FLUID X AIR TYPE 30 50 70 (INCHES) FLUID

TO BE SPRAYED NOZZLES* PSI PSI PSI AT 8 IN. NEEDLE

VERY THIN

Pencil Line D920 x D90P PE 1.2 1.7 2.3 --- 940

THIN

Lacquers, J920 x J91P PE 2.2 3.2 4.2 10 940

Enamels, J930 x J92P PE 3.0 4.1 5.4 9 940

Oils, Inks, J940 x J92R PE 1.5 2.3 3.0 RD. 940

Sealers J920 x J91S SE 2.17 3.2 -- 10 940

J930 x J92S SE 2.7 3.9 -- 9 940

MEDIUM

Lacquers, J940 x J92R PE 1.5 2.3 3.0 RD. 940

Sealers, J960 x K91P PE 2.0 3.0 4.0 11 960

Shellacs K960 x K91R PE 1.7 2.5 3.1 RD. 960

Varnishes K960 x K92P PE 2.7 4.0 5.3 9 960

Primers, K960 x K91S SE 2.0 3.2 -- 11 960

Enamels, Oils K960 x K92S SE 2.7 4.0 -- 9 960

Nozzle and Needle Selection Charts (cont.)Model 460 Gun Nozzle Selection Chart

Nozzle Tips for Extensions

C CVT DIRECTIONHC HCVT OF SPRAY

52-363 52-2372 Rt. Angle

52-364 52-3272 Reverse

52-365 52-3041 Forward

Right Angle Reverse Foward

Model 115 Gun Nozzle Selection ChartCFM AT MAX. PAT.

TYPE OT FLUID FLUID X AIR TYPE 30 50 70 (INCHES) FLUID

TO BE SPRAYED NOZZLES PSI PSI PSI AT 8 IN. NEEDLE

VERY THINWash Primers, 76 x 76P PE 4.9 7.2 9.5 8 76SSDyes, Stains, 77 x 77P PE 4.2 6.8 9.3 9 77SSCleaning Fluids, 76 x D76S SE 2.2 3.4 4.5 6 76SSWater, Inks 77 x 3/4 SE 2.9 4.6 -- 8 77SS

78 x 78S SE 4.2 6.9 -- 8 78SS78 x 78SD SE 2.8 4.0 -- 7 78SS

THINSealers 77 x 77P PE 4.2 6.8 9.3 9 77SSPrimers 78 x 78P PE 4.8 7.0 9.4 10 78SSLacquers 78 x 78S SE 4.2 6.9 -- 8 78SS

78 x 78SD SE 2.8 4.0 -- 7 78SS

MEDIUMLacquers, Primers, 77 x 77P PE 4.2 6.8 9.3 9 77SSVamishes, 78 x 78P PE 4.8 7.0 9.4 10 78SSEnamels, 78 x 78S SE 4.2 6.8 -- 8 78SSHouse Paints

Nozzle Selection Chart for Extensions EAX, EBX and ENX(Use with Model 95, 95A, 2001 Guns)

CFM AT MAX. WIDTH

TYPE OF FLUID FLUID X AIR TYPE 30 50 70 PATTERN

TO BE SPRAYED NOZZLES PSI PSI PSI AT 8 INCHES

LIGHT TO MEDIUM

Viscosity J2 x AA PE 3.1 5.0 6.4 5 in.

Lacquers J2 x AA1 PE 3.1 5.0 6.4 5 in.

Enamels J2 x R6 PI 2.9 4.5 6.0 RD.

Primers J1 x R4 PI 4.8 7.0 9.4 18 in.

Fluid Nozzle Orifice Size

J1 - .082”(2.1mm) J2 - .043” (1.1mm)

Air Controllers

Spray Gun ExtensionsIn-Line Cartridge Filter

In-line Cartridge Filter*

Cartridge Replacement Mesh

Filter Screen

Assembly

54-990 54-987 100

54-981 54-980 150

Shpg. Wt.

14 oz. 4 oz.

* Also adaptable to fluid lines from

spray guns.

Length Part Shpg. Act.

In Feet No. Wt. Wt.

(lbs.) (lbs.)

4 54-296 4 3

6 54-297 5 1/4 4

8 54-298 6 1/2 5

For hard to reach locations. Attach toSpray Gun Models 95 and 2001.For conventional coatings. Air inlet 1/4” NPS (m)Fluid inlet 3/8” NPS (m)

Part Number 73-135High flow for minimal pressure drop. Same as 73-125, but less gauge.

For air inlet at-the-gun mounting to giveconvenient, immediate pressure readingand correction. Anodized aluminum bodyis fitted with:

• 1/4” NPS (f) swivel connectionfor 360° variable position.

• 1/4” NPS (m) thread.• Pressure adjusting knob and

pressure gauge.

Part Number 73-125

Part Sheet 2142

Air Metering Valve Assemblies

Fluid Circulating Connections

Part Number 73-157 Type: StraightThread: 1/4” NPS (f)

1/4” NPS (m)

Part Number 54-957Brings air and fluid hoses together at thebase of the spray gun. Use for Spray GunModels 95, 95SL and 2001. 3/8” NPS (m) connection.Shipping weight 8 oz.

Part Numbers 72-799 and 72-1823(stainless)

Use for Spray Gun Models 95 and 2001in circulating and heated fluid systems.3/8” NPS (m) connection. Shipping weight 14 oz.

Body, Tube, and

Bracket Assembly

In-line cartridge filter.Part Number 54-988 (100 mesh)Part Number 54-982 (150 mesh)Shipping weight 1 lb.

Part Number 73-159 Type: 90°Thread: 1/4” NPS (f)

1/4” NPS (m)

22

Fluid Strainer Assemblies

Fluid Inlet Tube Extension(less fluid strainer)

Gunner’s Mate(spray gun lubricant)

Part Number 6-429One case of (20) two-ounce Gunner’sMate bottles.Part Number 6-428Two ounce bottle of Gunner’s Mate.

Spray Gun Accessories

When it comes to complete systems

Binks leads the way with high

transfer-efficient spray guns,

reliable fluid handling equipment,

efficient air purifying systems and

quality accessories.

The Binks Mach series spray guns

set the industry standard for

reliable low, medium, and high-

pressure HVLP spray finishing,

offering the most complete line in

the industry. Models 95 and 2001

spray guns remain the most

popular conventional spray guns

and feature our famous “60” series

nozzles, capable of atomizing the

full range of today’s coatings.

Today, Binks has redefined its

place in the finishing industry with

quality products and responsive

customer service. Whether it’s

furniture, aerospace, electronics,

appliance or automotive finishing,

Binks’ experts are waiting to match

your needs with its products.

At Binks, we are a renewed

company with a proud tradition.

23

Spray Guns• Manual and automatic conventional

air spray and HVLP

• Manual and automatic airless & air-assisted

airless

• Mastic & extrusion guns

• Plural component

• Anodized forged aluminum gun bodies

• Waterborne compatible, stainless steel passages

• Gravity feed, suction feed and pressure feed

Cups and Tanks• Siphon cups, pressure cups

• Aluminum, stainless steel, agitated

• 2 qt. pressure cup

• 2, and 5-gal. pressure tanks

Pumps• Diaphragm and piston

• Low, medium and high pressure

• Variety of mounting accessories

Hose• Fluid and air hose

• Ball and air-adjusting valves

• Quick disconnects, fittings and connections

Additional Accessories• Thread adapters

• Fluid nozzles, air caps, needle selections,

extensions

• Educational tools and reference literature

• Replacement kits, test kits, regulators

• Respirators

• Spray booth filters

Systems Solutions

WATERBORNECOMPATIBLE

North American OfficeITW Industrial Finishing

Binks 195 Internationale Blvd.

Glendale Heights, IL 60139630-237-5000

Fax 630-237-5011www.binks.com

Customer Service1-800-99-Binks

Technical Support1-888-99-Binks

Sales and Service Through a Nationwide Network of Industrial Distributors

© 1999 ITW Industrial Finishing Printed in U.S.A. A-54-19R-15 8/99 30M