cooper bussmann qucooper bussmann quik-spec series of product specs
TRANSCRIPT
-
8/11/2019 Cooper Bussmann QuCooper Bussmann Quik-Spec Series of Product Specs
1/6
Specification made simple forsuperior protection andselective coordination ina compact size
Quik-Spec Family of Products
Specification is faster
and easier for the power
distribution products you
need to achieve selective
coordination, and improve
electrical system safety and
performannce.
As the only company with a
complete portfolio of circuit
protection solutions to mee
every application need,
Eaton and Bussmann offer
unmatched leadership in
circuit protection.
More expertise. More
solutions. Expect more.
-
8/11/2019 Cooper Bussmann QuCooper Bussmann Quik-Spec Series of Product Specs
2/6
Enhanced SafetyIntegral use of Bussmann components provide superior protection and help prevent contact with
live parts to reduce hazard to personnel and minimize arc flash hazard.
All-In-One SolutionThe Quik-Spec Power Module Switch helps meet NEC Selective Coordination requirements
with a simple build-a-code part number system that assures you get the right components with
the right ratings, properly assembled.
Compact SizeWith innovative compact component designs, our power distribution products provide greater
flexibility for equipment layout with some of the smallest footprints in the industry.
Flexible ConfigurationsChoose from a full range of configurable constructions with options and a wide range of
accessories to address your specific application and selective coordination requirements.
Specification is faster and easier for the power distribution productsyou need to achieve selective coordination, and improve electrical
system safety and performance.
QuikShip Services
2
Quik-Spec family made simple
In stock for QuikShip Everyday Service - 4-hour turnaround on 90% of project quotes.
QuikShip Made-To-Order Service - 4-hour turnaround on 90% of project quotes. Ensures quick
turnaround times on many custom made assembly products.
-
8/11/2019 Cooper Bussmann QuCooper Bussmann Quik-Spec Series of Product Specs
3/6
3
UL Listed and cULus to CSA Standard 22.2 make it easy
to address NEC and CEC selective coordination
requirements in an all fused system.
Value-engineered for greater flexibility with up to
400A mains, 200kA SCCR, 100A branches with
18, 30 and 42 branch positions. Same size footprint as traditional circuit breaker
panelboards and 40% smaller than standard
fusible panelboards: 20 W x 5 3/4 D x various
heights (depending on configuration).
Increase safety with current-limiting, finger-safe
CUBEFuse that minimizes arc flash hazard levels.
Configurable options for 600, 800 and 1200A mains
and branches from 1-600A all rated 200kA SCCR
at 600Vac.
Quik-Spec online configurator makes specifying
and ordering easy delivers a full bill of material
and submittal drawings for an entire project.
Available for 10 day shipment with QuikShip
service on 400A versions.
See Data Sheets: #1160 (30-400A), #1171
(600-1200A).
The Quik-Spec Coordination Panelboard
(QSCP) simplifies selective coordination
and offers more application flexibility.
Best selective coordination solution
in the smallest footprint
Quik-Spec Coordination Panelboard
-
8/11/2019 Cooper Bussmann QuCooper Bussmann Quik-Spec Series of Product Specs
4/6
4
Easily meet NEC Selective Coordination, NFPA 72 Fire
Safety and ANSI/ASME requirements for elevator
disconnect.
Easy to specify with the Bussmann Quik-Spec Power
Module Switch build-a-code.
Simple to install with a completely assembled product
ready for installation. The Power Module Panel offers significant space savings
for multiple elevator control with multiple switches in a
single panel.
Available for 3 day shipment on select Power Module
switches and 10 day shipment on select Power Module
panels with QuikShip service.
See Data Sheets: #1145 (PS), #1146 (PMP)
The Bussmann Quik-Spec Power Moduleswitches and panels offer an all-in-one
solution.
Finger-safe CUBEFuse design provides a safer environment for personnel by helping to
prevent exposure to live parts and reducing arc flash hazard levels.
Dual interlock door helps prevent access by unauthorized personnel inside the
enclosure when the system is energized.
A visible double break, quick-make, quick-break rotary blade mechanism allows for
confidence of switch ON/OFF status.
Optional viewing window provides visual confirmation that switch contacts have
operated and the ability to view fuse indication without opening the switch door.
See Data Sheet: #1156
Better safety and application versatility
Easy specification to meet elevator disconnect requirements
The Quik-Spec
Power Module Switch
(PS) for single elevator
applications.
Quik-Spec
Power Module
Panel (PMP) for multiple
elevator applications.
CUBEFuse Safety Switch
Quik-Spec Power Module switch and panel
Quik-Spec Power Module and CUBEFuse Safety Switch
Finger-safe components improve safety by helping to reduceaccidental contact with live parts in various enclosures to meet
application needs.
-
8/11/2019 Cooper Bussmann QuCooper Bussmann Quik-Spec Series of Product Specs
5/6
5
Selective coordination* is easy with the Bussmann Low-Peak fuses
2:1 Amp Ratio
Just keep a 2:1 upstream to downstream amp rating ratio between any Low-Peak fuse and you have selectivecoordination of the fuses in a circuit
Wide Class and Rating Selections
Low-Peak fuses are available in TCF CUBEFuse**(Class CF, 1-100A), LP-CC (Class CC, 1-30A), LPJ_SP(Class J, 1-600A),
KRP-C_SP (Class L, 601-6000A) and LPN-RK_SP (250V Class RK1, 1/10-600A) & LPS-RK_SP (Class RK1, 1/10-600A) with ratingsup to 600Vac and interrupting ratings of 300kA (200kA for Class CC)
*For other fuse types, see published ratios in the Bussmann publication Selecting Protective Devices (SPD). Go to www.cooperbussmann.com/spd.**Class J performance.
The Quik-Spec family of products provides fusiblesolutions that make it simple and cost effective to
selectively coordinate a fused electrical distributionsystem.
They also help designers, installers and building ownersachieve greater downtime reduction, Code compliance
and workplace safety by providing high interrupting
ratings, high short-circuit current ratings, componentprotection and low arc flash hazards.
Selective coordination is mandatory per the NEC for thecircuit paths of some vital loads on specific systems
including: Elevator Circuits: 620.62
Emergency Systems: 700.27
Legally Required Standby Systems: 701.18 Critical Operations Power Systems: 708.54
Essential Electrical Systems: 517.26
An electrical system circuit that has selectivelycoordinated overcurrent protective devices allows onlythe nearest upstream overcurrent protective device to
open under any overcurrent condition. This increases the
systems reliability by preventing an overcurrent event
from cascading and unnecessarily opening multiple levelsof upstream overcurrent protective devices with the
potential to unnecessarily blackout an entire building.
For other electrical systems, selective coordination is alsoa highly desirable design consideration as selectivelycoordinated overcurrent protective devices help avoid
unnecessary blackouts that negatively affect business
assets and productivity.
Bussmann Low-Peak fuses make achieving a selectively
coordinated system easy. For available short-circuitcurrents up to 200kA, just maintain at least a minimum
2:1 amp rating ratio between upstream and downstreamfuses (see below). For almost all systems, the engineer
and installer can save money and time since there is no
need to do a short-circuit current study or plot time-current curves to engineer selective coordination.
Low-Peak fuses also offer the benefit of interrupting
ratings up to a 300kA. Very few electrical systems willhave available fault currents greater than 300kA, and ifthe system changes and the available short-circuit current
increases (less than 200kA), the Low-Peak fusible solution
still provides selective coordination.
Selective coordination and the NEC
CUBEFuse
Safety Switch
-
8/11/2019 Cooper Bussmann QuCooper Bussmann Quik-Spec Series of Product Specs
6/6
Customer Assistance
Customer Satisfaction Team
Available to answer questions regarding Bussmannproducts & services Monday-Friday, 7:00 a.m. 6:00 p.m.Central Time. Contact:
Toll-free phone: 855-287-7626 (855-BUSSMANN)
Toll-free fax: 800-544-2570
E-mail: [email protected]
Emergency and After-Hours Orders
Next flight out or will call shipment for time-critical needs.Customers pay only standard product price, rush freightcharges, & modest emergency service fee. Place theseorders through the Customer Satisfaction Team duringregular business hours. For after-hours, contact:
After hours 314-995-1342
C3 the Enhanced, Online Cooper Customer Center
Provides real time product availability, net pricing, orderstatus & shipment tracking for: B-Line, Bussmann,
Crouse-Hinds, Lighting, Power Systems & Wiring Devices.Call 877-995-5955 for log-in assistance. Available at:
www.cooperc3.com
Application Engineering
Technical assistance is available to all customers.Application support is available Monday-Friday,7:00 a.m. 5:00 p.m. Central Time. Contact:
Toll-free phone: 855-287-7626 (855-BUSSMANN)
E-mail: [email protected]
Online Resources
Visit www.cooperbussmann.com for the followingresources:
Product search & cross-reference
Product & technical materials
Solutions centers for information on topical issuesincluding arc flash, selective coordination & short-circuitcurrent rating
Technical tools, like our arc flash calculator
Where to purchase Bussmann product
Eaton is a registered trademark.
All other trademarks are propertyof their respective owners.
Eaton1000 Eaton BoulevardCleveland, OH 44122United StatesEaton.com
2014 EatonAll Rights ReservedPrinted in USAPublication No.10015April 2014
Eatons Bussmann BusinessPO Box 14460St. Louis, MO 63178-44602www.bussmann.com
Your authorized distributor is: