corporative introduction - 2016 · 66% shareholding 34% shareholding ebikemotion® technologies sl...
TRANSCRIPT
ebikemotion® Corporative Doc.
Corporative Introduction - 2016Ebikemotion® Corp. Extended Version
Wide resume of the company structure, members of the shareholding, production and partnership terms. Main product lines and goods that ebikemotion can
supply based in the available products developed (software and hardware) that is produced in the facilities of the members of the shareholding.
Document Version 3.1
15th of June 2016
NAGARES SA
Ctra. Valencia, S/N
16200, Motilla del Palancar,
Cuenca – Spain
Production Centers
Ebikemotion® Technologies SL
c/, Orfebres, 10
34004 – Palencia (SPAIN)
Company Headquarters
GRUPELEC SA
Parque Tecnológico Castilla León, P 132,
4715, Boecillo
Valladolid - Spain
GND SA
Calle Nicolás Copérnico, 12,
46980, Paterna
Valencia - Spain
RD Centers
BISITE (USAL)
Calle Espejo, 12
37007, Salamanca – Spain
Index of ContentsThe Flexible Smart e-Bike Platform
• EBIKEMOTION® TECHNOLOGIES, The company (by StageMotion and Nagares)
– Short Time line of the project and company
– Locations and structure of Company, quality and facilities
– The B2B Solution (One Product special adapted and designed for DCW)
• Ebikemotion® e-bike 2016 Systems
– ebikemotion System Implementations
– ebikemotion® e-bike Platform
– ebikemotion® iWoc® II
– ebikemotion® USB On-Wire
– ebikemotion iWoc® ONE Display
– ebikemotion® Tracker
– ebikemotion® APP
– ebikemotion® user WEB Backend
• Help Center
– Ebikemotion® Manufacturer Backend
Ebikemotion Technologies SLTimeline – From the beginning to actual day
Original Plan and Process Evolution of iWoc 2
First Soft.
Prototypes
Patents &
Hard. mockup
Eurobike’14
Feedback
Prototypes
for industry
First LEADs
and ContactsNew Corporative
partners – Join
Venture
Ordering
ideas
Nov’13 – May’14 Jun – Sept’14 Oct’14 – Setp’15
WALKING STEP BY STEP – 1st Generation of iWoc® System, Framework, APP V1.0
New Platform
Concept
definition
ebikemotion
Company
Foundation
SPEED WAY – 2nd Generation of iWoc® System, New Adds for a complete e-bike solution (Controller, Display, etc.)
Eurobike &
Interbike’15
Presentation
2nd Generation
Prototypes
(Soft. & Hard)
Production
of 2nd Gener.
Hard & Soft.
First Bicycles
of customers
in the market
ebikemotion 2,0
Launch & new
Alliances
Eurobike,
Unibike &
Interbike 2016
Oct’15 – Jan’16 Feb – Jun’16 Jul – Setp’15
Smart Hub iWoc® Remote USB On-Wire Smart Motor Controller Smart Display APP & Backend Tracker
66%Shareholding
34%Shareholding
ebikemotion® Technologies SL was created as a new company where the members mainly supply to the company apart of funds, solutions, staff,
facilities and R+D. By this way the company STAGEMOTION SL is the product team coordinator, suppling software solutions (APP and WEB), 3D Design,
Marketing, electronic pre-design and conception (16 people). NAGARES SA (Group) is the industrial branch and muscle of the company with more than 50 engineers working in its R+D centre in GND Automotive (Valencia) and 450 in the Factory in Motilla del Palancar (Cuenca) . The Turnover of the
ebikemotion’s company member is more than 80 M€ per years with own offices and staff in Spain, France, Germany, Italy, Poland, Moscow, China, Tunisia,
Colombia, USA & Brazil.
But even more, STAGEMOTION SL participates in a big CONSORTIUM with the R+D CENTRE of the University of Salamanca, including in the project more than 20 engineers, doctors and professors that collaborate in intensive way in the development of the APP software, making it really innovative and professional
Ebikemotion Technologies SL
Capital Stock: 190.000€
Actives: 200.000 €
Staff: Based in Members of Shareholding
66%Shareholding
34%Shareholding
Nagares Group Product Porfolio – The ebikemotion industrial and Production MuscleNagares has a long expertise in many critical electronic components in the Automotive Industry with capacity to manage all the phases of the production and
produce and assemble in his own facilities in Spain the goods. With a long expertise in BMS and Motor Controllers for electric vehicles is the perfect partner
eb
ike
mo
tion
Technologies
NAGARES GROUP
Staff 454
2015 71MM€
Production and Research Centers 3
STAGEMOTION (Spain & Germany)
Staff 16
2015 1,3MM€
R+D Centre (University of Salamanca)
Staff 35
Ebikemotion Full-Time (12)
HEADQUARTERSSTAGEMOTION Automotive S.L.
(Palencia, Spain)
PRODUCTION CENTERSNAGARES Automotive S.A.
(Motilla del Palancar - Spain)
RESEARCH CENTERSBISITE R+D Group
(University of Salamanca)
GND ( NAGARES)
(Valencia – Spain
GRUPELEC (NAGARES)
(Valladolid – Spain
EBIKEMOTION Germany
(STAGEMOTION)
(Mannheim - Germany)
25of
Corporative – Extend V. 2016
Automotive mass-production-proven experience since 1980s
Field return Quality analysis typical response time < 72h
Warranty costs up to x5 part price covered in case default Nagares responsibility
Facts:
• Renault 1 ppm out of 1.600.000 parts/year
• Mahle 0 ppm out of 1.080.000 parts/year
• JaguarLandRover 0 ppm out of 116.000 parts/year
• PSA (Peugeot/Citroen) 0 ppm out of 190.000 parts/year
• Nissan (on engine part) 26 ppm out of 600.000 parts/year
• VDA 6.3 grade A (91,1%) certified by Daimler in Dec.2014
The NAGARES Manufacturing Quality overview
The Quality – PPM’sMaking Business with all guaranties of one OEM and TIER1
Automotive Supplier
25of
Corporative – Extend V. 2016
ebikemotion® Your partner to create your smart e-bike
The companies members of the ebikemotion technologies shareholding are consolidated suppliers of the Automotive Industry. Between
our customers we can mention: RENAULT, NISSAN, MAHLE, JAGUAR – LAND ROVER, FORD, PSA PEUGEOT CITROËN, MERCEDES
Solid References in Automotive (Shareholding Members as Nagares)
ORBEA (Spain) MY2017 e-bike Controller, Display, Remote Control, USB on-Wire, APPs, User Server Back-Office
BIONX (Canada) MY2017 e-bike APP (also for their customers), Consultant
ELBY BIKES (USA) ELBY BIKE Smartphone APP control, Web Server for APP and Users and Web Back Office
ROCKY MOUNTAIN (Canada) MY2017 e-bike Display, Remote control, USB on-Wire, APP, User Server Back-Office
PROCYCLE GROUP (Canada) MY2018 e-bike Controller
CONTI EBIKE & BROSE MY2017 e-bike Remote Control, USB On-Wire
DCW (Germany) SmartHub, Remote Control with Bluetooth®, Compatible with IMPULSE EVO
LEGEN EBIKES (Spain) MY2017 e-bike Display, Remote control, USB on-Wire, APP, User Server Back-Office
EBIKE75 (Spain) MY2017 e-bike Display, Remote control, USB on-Wire, APP, User Server Back-Office
BAFANG (China) MY2017 e-bike Display, Remote control, USB on-Wire, Smartphone APP
CONFIDENTIAL PROJECTS MY2018 Sharing (Design and definition of the complete e-Bike system, battery and all software)
MY2017 Tracking and Electronic for a Private Sharing e-Bike.
MY2017 are Project that will be presented during Eurobike 2016
MY2018 are Project that will be presented during first Quarter of 2017
Solid References in Cycling (Just the First Year)
25of
Corporative – Extend V. 2016
ebikemotion® is 100% B2B A.D.N. company. We are in the market not for stablish a commercial networks to supply the product to the
end user creating typical business B2C. Our business model is focused into give the best professional service to the e-bike assembler or manufacturer to create the best product and solutions adapted to their necessities, we mean AD-HOC or adapted products.
That means that the solution that we will supply to you by offer will be the Customer one, and it can includes your design,
architecture and style making it exclusive of you and completely different to the rest ones a adding your expertise and ideas.
The Smart Adapted Solution
The B2B SolutionOne Platform infinite possibilities for the Customer
25of
Corporative – Extend V. 2016
Ebikemotion System Implementationsebikemotion® Platform
25of
Corporative – Extend V. 2016
One Platform – Multiple Combinations (Only with iWoc® as Remote Control)
Only the APP and Backend
Motor
CAN BUS
RS-232
RS-485
or Motor
Controller
Direct Communication with
Bluetooth of 3er party
integrated in the electronic
iWoc® II
Remote
Smart-HUB
Tracker
MotorMotor Motor
TrackerTracker
USB On-Wire
Op
tio
na
lS
yste
ms
Motor
CAN BUS
RS-232
RS-485
iWoc® II
Remote
CAN BUS
RS-232
RS-485
iWoc® II
Remote
CAN BUS
RS-232
RS-485
iWoc® II
Remote
or Motor
Controlleror Motor
Controller
or Motor
Controller
iWoc® II Control with Power supply 6-13V from Motor
iWoc® II control with Power supply 7-55V from Motor
iWoc® II Control with SmartHUBTo integrate protocols
iWoc® II Control with ebikemotion Controller
Motor
Controller
25of
Corporative – Extend V. 2016
One Platform – Multiple Combinations (with iWoc® ONE Display or other elements)
Only the APP and Backend
Motor
CAN BUS
RS-232
RS-485
or Motor
Controller
Direct Communication with
Bluetooth of 3er party
integrated in the electronic
Tracker
MotorMotor Motor
TrackerTracker
Op
tio
na
lS
yste
ms
CAN BUS
RS-232
RS-485
or Motor
Controlleror Motor
Controller
or Motor
Controller
iWoc® ONE Display connectedto External Motor Controller
iWoc® ONE Display connectedto ebikemotion Controller
Ebikemotion® Motor ControllerConnected to external system
Motor
Controller
iWoc® ONE
DisplayiWoc® ONE
Display
Motor
Controller
ebikemotion® e-bike PlatformE-bike Technology with 100% Produced in Europe AND
Systems for MY-2017 of some of our customers(available during year 2016)
25of
Corporative – Extend V. 2016
Remote Control iWoc® II
Ebikemotion 2016 SystemsReady to supply from March 2016 in advance (Hardware)
iWoc® USB On-Wire
The new remote control iWoc® II is a new generation of e-bike remote control designed with Automotive
standards that introduce something new by the point of view or ergonomic, integration and scalability.
It includes Bluetooth® 4.1, 8 white LED and 1 RGB LED, 5 Buttons with 2 commands by button and
Support RS485, RS232 and CAN BUS protocols. The joystick can offer full e-bike control and inform
about Battery and Assist Levels by itself with no extra electronic components (Connected to e-bike
display or controller bus) and working in combination with the Smartphone APP. Operates with power from 6 to 13V-120mA and it possible to be customized with special decoration of different materials
for different bands. Actually is compatible with (IMPULSE EVO, CONTI, BROSE, BAFANG V4 AND V5,
LINSUY, PROCYCLE, DAPU & EBIKEMOTION protocols).There is a low cost version without Bluetooth® and resistive to be installed in combination with Displays.
The USB On-Wire is an special Waterproof Power Supply Unit to charge one
smartphone or give power to third accessories like front lights. It can supply 5V-
1500mA by USB Type-A and also can convert the display power lines over 13V to the
suitable ones for iWoc® 2 Joystick (5V-120mA). It can operates from 6 to 55V. Can be
customized for each brand and thanks to it little size can be installed in the handlebar
wiring area (60 x 14 x 22 mm)
iWoc® II can control by itself the e-bike operating like a DISPLAY
For charging the smartphone is possible to install as option USB On-Wire Adapter
25of
Corporative – Extend V. 2016
iWoc® Display ONE
Ebikemotion 2016 SystemsReady to supply from May/June 2016 in advance (Hardware)
iWoc® Tracker
The iWoc® Display ONE, is our new display generation. It works with the iWoc® II remote joystick and the
smaller display of the market it we take in mind the resolution of the screen: B/W 2,7” Transflective
display, Resolucion 400x240 pixels, Main Dimensions 44 x 64 x 18mm (Area view and Size similar), Dot
Pitch 0,147 x 0,147. Bluetooth® 4.1 (Microchip), USB power Supply (1500 mA), Remote control iWoc® II
(Resistive Version), Back-light 500cdm (just for night view). It is the highest resolution and more
improved for day light e-bike display of the market. External connections for REMOTE and POWER/BUS
based in HIGO 6 pin Connector. Compatible with RS485, RS232 and CAN BUS. Support e-bike information
and Remote information by Bluetooth® (Navigation, Weather, Phone information (Calls, Notifications,
etc.). By option it can includes a removable head light. Operates 6-55V.It is possible to create one ad-hoc case box for the display
The iWoc® Tracker is a GPS and GPRS optional Track system to recover the position of
the e-bike and send the information to the EbikeMotion APP. The solution integrates
IP Network and is compatible with RS485, RS232 and CAN BUS.
Apart of sending information of the position can Receive and Send commands to the
APP and Server to show information by example in the display. Operates 6-55V
iWoc® Display ONE can control by itself any e-bike based in compatible and supported
Protocols like the iWoc® II Remote control.
25of
Corporative – Extend V. 2016
iWoc® Motor Controller
Ebikemotion 2016 SystemsReady to supply from May/June 2016 in advance (Hardware)
Ebikemotion® Web APP Back-end
Nagares SA has a long experience in automotive DC Motor Controllers. So we have use all the expertise
and technology to create a vector motor controller that includes a USB Power Supply (also for update),
CAN BUS and RS-2332 bus communication. The motor controller can supply as maximum 720W and is
developed to 250W/36V motor applications. The controller can be connected to e-bike systems that
include or not Battery and Motor Bus and it is possible to modify the motor performance using the
ebikemotion APP. The motor MAP can be customized for different e-bike applications and by factory
support 3 Map Modes (Confort, Off Road and Speed). By default the motor controller starts always in
Comfort mode.It is possible to create one ad-hoc PCB motor controller for Mid-Drives units or special motor controller box.
we have created the user Dashboard website, that offer all the information and even
new functions that has more sense to manage by the computer at home in relation
with activities, track profiles, etc.
Manufacturer backend is the private website that offer to you the tool for deploying
services around your community users. It leaves to you to know some public data of
your customers and create some filters taking in mind genre, type of bicycle or model
to offer special products or services by banners.
25of
Corporative – Extend V. 2016
Professional Cycling APP for e-bikes and standards
ebikemotion® APP is the most advanced application for bicycles in the
market today. Designed from the beginning for e-bike using and full
integrated with ebikemotion® Product Family it includes all functions
that your users desire.
The Link between users and OEM
Our APP and Framework is not designed just as one APP. We have
designed by the point of view of UI customization and to create a
gateway between users, e-bikes and the OEM to keep all of them
connected
ebikemotion® users APP
Ebikemotion 20167 SystemsReady to supply from September 2016 in advance (Software)
Activation and Advanced Process, forget the Interfaces
Dealer APP will leave to dealer activating the e-bike just to
user test, make a diagnostic or install and activate any
accessory using a simple smartphone with Bluetooth®
OEM control of e-bikes in Dealers
Our system will leave to you to control manufacturing dates,
serial numbers, parts involved in one e-bike, send in transport
mode, managing guaranties, avoid losing and giving better
service
Ebikemotion® Dealers APP
25of
Corporative – Extend V. 2016
Ebikemotion 2016/7 SystemsReady to supply from September 2016 in advance (Eurobike)
Based in the same FRAMEWORK that we have used to created the APP ebikemotion V2.0,
we have already developed different APPs for our customers with special customizations,
like BionX or ELBY BIKES that are ready to go in the next weeks.
Customized APPs for our customers
25of
Corporative – Extend V. 2016
Special development that include one antivandalic On/Off power button for the e-bike and a complete
housing to install a UBS Power Port in the frame tube of the e-bike. The Power supply of USB is
managed by the ebikemotion® SmartHub Unit also installed inside the Frame of the e-bike with the
battery.
Similar plastic cover is also used for create in the frame of the bicycle a Charginr port.
Switch Button with USB Power Supply
Ebikemotion 2016 SystemsSpecial ad-hoc developments for some customers
Is a modular and scalable electronic box designed to communicate any e-bike system
with other devices using different communication protocols at the same time. It is like
the “Babel Tower” of the e-bikes. The SmartHub works with CAN BUS, SERIAL and
UART protocols crossing messages between them and including and analog I/O port
for special remote devices like lights, horn, brakes, lock systems, etc.
All the information is accessible by Bluetooth® using the commands included into
Open Code of our iWoc® SDK 3.0. the SmartHub works always in combination with the
iWoc® joystick or display where is installed the Bluetooth® antenna.
iWoc® SmartHub
ebikemotion® current ArchitectureFlexible Smart e-bike Platform
25of
Corporative – Extend V. 2016
Elements of e-bike Platform by ebikemotion®
HMI Systems E-bike Control Systems
iWoc® II
External Elements
Eb
ike
mo
tio
n w
ire
less
Pro
toco
l
Ba
sed
in
Blu
eto
oth
4.0
iWoc® One
Display
USB On-
WireSmartHub
Smart
Motor
Controller
Motor
Battery
Internet
CAN BUS
RS-232
RS-485
CAN BUS
RS-232
RS-485
Tracker
Optional
Electronic
Shifting
Motor
Controller
Ebikemotion® iWoc® IISmart Remote Control
25of
Corporative – Extend V. 2016
25
iWoc® II Remote Control – The New Generation of HMI
iWoc® II is the new generation of remote control for e-bikes. It can offer to the user by itself all the information that he needs in relation with the e-
bike (Status, Assist Level Control and Battery Information). 5 Buttons with 2 functions each ones leave to the joystick manage different situations
as Walk Mode, Electronic Shifting Control, APP control, etc.
It is ergonomic, compact, strong and customizable for each brand. Integrates different communication technologies as Bluetooth®, CAN BUS and
Serial Ports (RS-232 and RS-485), and the firmware and external connections can be adapted to the customer necessities. The iWoc® II is an easy
door to create one smart e-bike in short time. User will not need nothing more and it can be used in combination with the APP.
The iWoc® II Remote Control includes:
- Advanced Mechanic button system of iWoc® II (Plastic, Mechanic and L.E.D)
- Operation: 6-13V (120 mA)
- RS-232/RS-485 and CAN BUS
- Data & Power connection (From 4 to 6 Pin – Standard 6 Male Higo Connector)
- Waterproof protection (IP67)
- Ultraviolet surface protection
- Wireless Technology Bluetooth® 4.1 (Smart)
- Implemented One2One unique connections and advance pairing process
- Wired communication between iWoc® II and Display Port of the Motor Controller (Also available
USB On-Wire accessory to adapt the current)
- 5 Buttons with 2 functions by each one (Customizable ones)
- Full compliant EN 15194 & DIN EN ISO 13849
- Full control of the ebikemotion® APP
- Full control of the e-bike (Power, assist, Walk)
- Intelligent Pairing system for bounding the just the last Smartphone paired
- 4 white LED for battery status, 3 white LED for Assist Levels and 1 RGB LED for e-bike or APP
status.
- Special waterproof wired connector for all components
- Laser print in the bottom with special information (HW and SW version, SERIAL & PART
Numbers)
Operative:
- Available from 30th of March 2016 for massive production.
- Ready CAN, RS-232 and RS-485 Versions
- Ready Integration with ebikemotion® APP
- Flexible Quotation depending of type of connection,
quantities and engineering services to include in the
integration.
25of
Corporative – Extend V. 2016
iWoc® II Remote Control – Functionality
To control the Display, e-bike main functions Electronic Gear and APP at the same time, it is only necessary the iWoc® II Remote Joystick.
This is a short diagram of the functions implemented in the joystick for electronic and normal shifhting. The RGB LED can change color if
the user is in Automatic or Manual Shifting mode. There are many possibilities depending of the project and we supply a complete table for
making the customization to cover your necessities.
*This is a sample of implementation. Functions and command
positions can be moved to different buttons
26
MAIN
Buttons
AUX
Buttons
LED Active
Power
LevelRGB LED
Status
MAIN button [-]SHORT PRESS: Decrease Assist Mode
1 = ECO / 2 = CONFORT / 3 = SPORT / 3* = PERSONAL
LONG PRESS: Walk Mode
MAIN button Mode [0]SHORT PRESS: APP TTS Command
or ON e-bike if it is OFF
LONG PRESS: OFF e-bike
AUX Customizable Button [B]SHORT PRESS: APP Change AUX components
LONG PRESS: APP Context Function B
AUX Customizable Button [A]SHORT PRESS: APP Change MAIN component
LONG PRESS: APP Context Function A
Main button [+]SHORT PRESS: Increase Assist Mode
1 = ECO / 2 = CONFORT / 3 = SPORT / 3* = PERSONAL
LONG PRESS: Switching Lights
LED Battery
Level
B
A
+
-0
25of
Corporative – Extend V. 2016
27
iWoc® II Remote Control – Ergonomic and Installation
27
Wiring output
The Wire goes out
perpendicular to the
Internal PCB
The new iWoc® II is a full ergonomic joystick that the OEM manufacturer can install in different positions of the handle bar. All
the possible positions has different limitations and advantages, being all of them possible and accessible. The starting point for
the iWoc® II remote controller is that all the buttons of the joystick are programmable by software using and APP. That means
by example that the button used for increase one assist level could be any of the 4 exterior buttons of the joystick.
The OEM manufacturer can decide the factory position of the joystick and it is possible to define the functions of each button
depending of the natural movements of the fingers. So in normal situation the button placed in the UP position must be used to
increase the assist level and the DOWN button to decrease.
25of
Corporative – Extend V. 2016
WARNING IN THE SYSTEMAppears if there is any big problem
ASSISTANCE LEVELCurrent Selection for e-bike assist system
Action: Short Press [+] or [-]RGB Light: Short Blink (GREEN)APP command: Change Levele-bike command: Change Level
RGB Light: Periodical Short Blink (RED) until user press other buttonAPP command: Show Alert icon / BEEP
Example of Functions of the iWoc® II in combination with ebikemotion® APP V2.0
CHANGE MAIN COMPONENTAction: Short Press [A]RGB Light: Short Blink (BLUE)APP command: Change to the next Main Component
CHANGE AUX COMPONENTAction: Short Press [B]RGB Light: Short Blink (BLUE)APP command: Change to the next Aux Component
SWITCHING LIGHTSAction: Long Press [+]RGB Light: Switching on while press button (WHITE)APP command: Show or Not the Lights icon and Change
TTS CALLAction: Short Press [0]RGB Light: Short Blink - GREENAPP command: TTS Actual Info
WALK MODEAction: Long Press [-]RGB Light: Switching on while press button (RED)APP command: Show the icon WALK while command.icon
Ebikemotion® USB On-WireUSB Power solution
25of
Corporative – Extend V. 2016
30
USB On-Wire – Aux Power for SmartPhone, iWoc® II RC, Lights, etc.
Sometimes the Power supply that we can get of the Display Port wire or the controller is not suitable for the iWoc® II RC and sometimes it is
necessary to include any extra electronic so generate any special signal for iWoc® II RC. This little and simple assembling add-on is installed between
the iWoc® RC and the display Line for making this job.
Basically it power supply the joystick with 6V and can convert power from 7 to 55V. At the same time generates a USB port Type A with 5V-
1500mA to charge the smartphone, power supply extra lights, etc. This is the perfect partner for iWoc® II RC when it is installed alone.
The USB On-WireWoc® II Remote Control includes:
- Advanced Mechanic button system of iWoc® II (Plastic, Mechanic and L.E.D)
- Based in 2 sides with ultrasonic seal.
- Control of maximum power supplied used for the Smartphone (with secure switch of system)
- Between 1200 mA and 1500 mA (Depending of External Motor Controller PS output,
that will supply directly to the display line.
- Direct Wire Connection to iWoc® 2 Remote Controller
- Waterproof connection to the EBIKE controller wire (see connection recommendations)
- Aerial USB Type A female with a waterproof cover (Charge and Update)
- Operation: 6-55V (Recommended 1,2A)
- Data & Power connection (Standard 6 Male Higo Connector)
- Waterproof protection (IP67)
- Ultraviolet surface protection
- 1 White LED Light to show status of module
- Full compliant EN 15194 & DIN EN ISO 13849
- Special system for fixing to the brake wires close to the handlebar
- Special waterproof wired connector for all components
- Laser print in the bottom with special information (HW and SW version, SERIAL & PART
Numbers)
Operative:
- Available from 30th of March 2016 for massive production.
- Ready Integration with iWoc® II RC in the same wire.
- On-demand it is possible to modify the connections.
- Flexible Quotation depending of type of connection,
quantities and engineering services to include in the
integration.
Smart Motor
Controller USB On-
Wire
iWoc® II
Remote
Control
Controller
Display Line
ebikemotion iWoc® ONE DisplaySmart Remote Control with Display
25of
Corporative – Extend V. 2016
32
iWoc® ONE Display – The New Generation of Displays
iWoc® ONE Display is the solution that ebikemotion® offer to you to integrate visual information, apart of the APP, in the handlebar of the e-bike.
The iWoc® ONE use a compact version of the iWoc® II RC con less components that are included into the display, so it can also works in an ECO mode
with the display switch off. Apart of the advantages of the iWoc® II RC integration, the iWoc® ONE comes with a 2,7” B/N Transflective Display with
a resolution of 400x240 pixels in one area of 45 x 65 x 16 mm. This kind of technology guarantize the best view in daylight and at night the
backlight solution of 500 cm2 solve this problem.
The Remote concept leaves to the user keep his smartphone safety in the pocket getting all the navigation, weather and connectivity information
by the Bluetooth connection with the smartphone. The ONE works also in combination with the Smartphone
The iWoc® ONE Display includes:
- iWoc® Remote Control (Compact Version)
- Advanced Mechanic button system of iWoc® II (Plastic, Mechanic and L.E.D)
- 5 Buttons with 2 functions by each one (Customizable ones)
- 4 white LED for battery status, 3 white LED for Assist Levels and 1 RGB LED for e-bike
or APP status.
- Transflective display by SHARP. 2,7” 400x240 pixels. Real Size (43x62,8x2,5 mm). Active Area
(35.3 x 59). Dot Pitch 0.147x0.147. Vison Angle 40º. Refresh 20. Backlight 500 cm2
- RS-232/RS-485 and CAN BUS
- Data & Power connection (From 4 to 6 Pin – Standard 6 Male Higo Connector)
- Waterproof protection (IP67)
- Accelerometer, Temperature sensor and Light Sensor (for automatic backlight)
- Ultraviolet surface protection
- Forward Geometry (Position in the from exterior of the handlebar)
- Wireless Technology Bluetooth® 4.1 (Smart)
- Implemented One2One unique connections and advance pairing process
- USB Type A power suppy 1500mA-5V (iPhone compatible)
- Internal Back-up Battery included from factory (CR-1632 – 3V)
- Full compliant EN 15194 & DIN EN ISO 13849
- Full control of the ebikemotion® APP
- Full control of the e-bike (Power, assist, Walk)
- Intelligent Pairing system for bounding the just the last Smartphone paired
- Special waterproof wired connector for all components
- Laser print in the bottom with special information (HW and SW version, SERIAL & PART
Numbers)
- Customizable Splash Screen by Graphic Library.
- Optional and removable Head Light available.
Operative:
- Available from 30th of July 2016 for massive production.
- Ready CAN, RS-232 and RS-485 Versions
- Ready Integration with ebikemotion® APP
- Flexible Quotation depending of type of connection,
quantities and engineering services to include in the
integration.
25of
Corporative – Extend V. 2016
33
iWoc® ONE DisplayMore than a simple display “The remote data”
The LCD display may seem a simple screen with a nice
design, but nothing is further from that idea, that's just
what you see from the outside.
The LCD has been created with a point matrix LCD that
leaves to us show any information with any design.
Although normally the display will show information such
as speed, time, distance, battery level and assistance level,
there are many information that it can show at the same
time in the screen.
Working in combination with iWoc® JOYSTICK the LCD display divides the screen in 2 areas, keeping
in the top information of the e-bike in the down extra information that the smartphone of the user
can send by Bluetooth®. The user can leaves his smartphone in his bag covered and protected and
getting information like incoming calls, weather, next maneuver, altitude, time to destiny, time, etc.
“Available in the
Middle of 2016”
25of
Corporative – Extend V. 2016
34
iWoc® Display ONE
Ebikemotion® GPS TrackerConnectivity without Smartphone
25of
Corporative – Extend V. 2016
36
Tracker – GPS, GSM (2G) Data Solution
The tracker is a sealed box to be included in a safety area of the bicycle (Inside Frame, controller box, Battery) to establish communication with the
bicycle to know the position and at the same time send and receive that can be used in the display, third applications like Sharing, etc.
The system can wake up on SMS request or external events like a movement of the accelerometer and send status and extra information of the
bicycle. Using the IP connection by the (2G) networks it is possible to transmit big quantity of data on demand of project. The box is sealed and
include the SIM on-chip from factory. The Operator solution is global. Position solution works in combination with APP and WEB backend.
Tracker Features:
- Quad-Band GSM 850/900/18001900MHz
- GPRS multi-slot class 10, • GPRS mobile station class B
- Compliant to GSM phase 2/2+
- Class 4 (2 W @ 850/900 MHz)
- Class 1 (1 W @ 1800/1900MHz)
- Control via AT commands
- (3GPP TS 27.007 and SIMCom enhanced AT Commands)
- SIM application toolkit
- SIM on-chip
- Global Operation
- Automatic Connection to the more power operator in the area.
- Supply voltage range: GPRS: 3.2 ~ 4.8 V. V-GPS: 2.8 ~ 4.3V. VCHG: 5V
- Specification for GPS
- Support EASYTM self-generated orbit prediction
- Support EPOTM orbit prediction
- Support SBAS ranging (WAAS, EGNOS, GAGAN, MSAS
Operative:
- Available from 30th of August 2016 for massive production.
- On-demand it is possible to modify the connections.
- Flexible Quotation depending of type of connection,
quantities and engineering services to include in the
integration.
Ebikemotion® user APPUsing the SmartPhone as display or as extra computer for the
Display (Remote Data)
25of
Corporative – Extend V. 2016
38
Ebikemotion® APP
Ebikemotion® APP is a new APP that use our new FRAMEWORK 2.0 with the information that we will obtain by the standard Bluetooth Protocol that
includes the iWoc® RC or the iWoc® ONE Display (both connected to bus lines of the e-bike). The standard look and feel of the ebikemotion® APP reduce the cost of software adaptation, but it is also possible a full adaptation on-demand for special projects. The Splash Screen of the APP can
changes to “BRAND NAME powered by ebikemotion®” when the APP works in combination with our hardware.
The APP has been created for a full integration with iWoc® RC, so it is possible to use the iWoc® buttons to change part of information of the screen,
confirm commands, answer calls, modify zoom, etc.
Examples of the new EbikeMotion
APP 2.0
The splash screen will be adapted to
the manufacturer brand once the APP
will detect the origin of the joystick.
The APP uses several web services
for login process and downloading
map process.
Also includes OFF Line navigation
based in Navigation Engines of third
companies.
We have our own politic for
downloading maps, subscription to
services, etc. totally integrated with
the commercialization politics of the
manufacturers and at the same time
with Apple and Google specifications.
ebikemotion APP (Speed components) ebikemotion APP (Map components)
25of
Corporative – Extend V. 2016
Ebikemotion® APP - Functions and Features Included, Part I
Assistance, battery & torque level, maps combined with battery to
show reach by area and distance, e-bike settings, Point of no return,
gear recommended if supported, watts consumed, watts remaining,
Autonomy, temperature of motor & Battery, instant current, instant
power*
Where I am, Advance Track Definition system, POis, Track Map, Friend
Tracks, Near Tracks, most voted Tracks, tracks closest to an address.
Weather conditions at actual location, weather forecast, forecast maps
and graphics for the next days. Alerts for good riding days. Based on
OpenWeatherMaps
Full control of main functions of the APP depending of the
configuration of the bicycle. (Change screen from JOYSTICK, move by
APP Menus, select one option, answering calls, read a message, ZOOM
in MAPS, etc.)
Full control without removing hands from the handlebar, Emergency
Notification service if there is no confirmation of safety after falling
based on user smartphone or information of the GPS/SIM/TRACKER
module if it is installed.
e-bike information compatible
Tracking and Routing
Weather Services
Remote control by MANUFACTURER iWoc® JOYSTICK
Safety on Board
Navigation turn by turn, day and night maps, on-line and off-line maps,
Algorithm to correct altitude data (IAS), Reach map for e-bikes, Search
by Address, Book of address, Track based on type of bicycle (Road,
MTB). Based on OpenStreenMaps.
Configuration of all functions and parameters based in information
saved in the iWoc® 2 of the bicycle. The APP will be configure
automatically for OEM settings, speeds, type of bicycle, controller
setting up. Also will be included special services for the customization
of size of wheel.
Hearth Rate & Speed and Cadence sensor Bluetooth® BLE compatible.
Possible upgrade to future BLE slave accessories like lights, etc.
Importer and exporter of tracks (GPX, Strava, etc.), Logbook & Track
Searcher. Automatic Internet connectivity from the smartphone to the
back office and vice versa to keep synchronized all the activities of the
user.
Navigation (by road or off-road)
One Click Configuration
Compatible with Wireless Accessories
Web Services Integration
Update by Apple Store or Google Play. APP guide and hardware
instructions. Fast checking of the devices of the e-bike (motor, battery
and control) to report any problem of the user.
Support & Updates
*Depending of information present in the BUS protocol
If the e-bike controller support this function it will be possible to
modify certain parameters of the controller to offer to the ridder
different feeling and e-bike response. Changes are based in Max.
Power supply (Current) or acceleration.*
E-bike Performance Service
25of
Corporative – Extend V. 2016
Ebikemotion® APP - Functions and Features Included, Part II
Call information by LED, Playlist control (control of playlist), play and
stop music, next and previous track. Read incoming messages on the
screen. Automatic TTS of the information of active screen in the
smartphone APP by Voice (Actual altitude xxx, speed, xxx, slope xxx…)
Customizable Auto lights on depending of timetable, automatic day or
night maps*, Forecast activity recommendation, Notifications of
challenges and times to your competitors, Cadence and effort
recommendations, Automatic control of e-bike assistance depending of
Heart pulse
The system's internet connectivity allows for a new network
experience using STRAVA Segments (Compatible). Automatic
sincronization of Routes done with STRAVA
Compatible with our own MANUFACTURER user system and at the
same time with Facebook or Strava user system integration for
challenges, routes & friends. Supported functions like FB automatic
wall publishing or automatic publishing in Tweeter or sharing by email.
Audio and Message Control
Automation of Functions
Network Services
Facebook, Tweeter, Strava & Network Integration
Hearth Rate information, Advise or abnormal frequency, Heart Rate
Zones, Cadence information, calories burned, percent of effort, full user
setting up. Trainer and objective planner. Advanced resume graphics of
activity, Apple Health.
Included the IAS of ebikemotion® that compare the altitudes of all
points of a track with NASA database and corrects al the altimeter,
total up and down hill and percent of any slope. Automatic
synchronization between server and user smartphone.
Complete voice commands and text information in different languages
according to smartphone language. (Translations based on XML file)
Integration of special function in the APP/WEB to keep control of the
situation of the battery and motor. Automatic recommendation by push
messages in the mobile of any error, setup or necessary maintenance
of any important component of the e-bike as well as error log.*
Fitness Services
IAS (Internet Altitude Service)
Multilanguage Support
Maintenance of the e-bike & Service
Adapted Look and feel of the starting splash screen of the APP
depending of the branch detected by iWoc® 2. The rest of design will
be the ebikemotion corporative one. Special menu for controller Setting
up
MANUFACTURER Look & Feel Combined APP
Special area to be managed when the e-bike is off to notify to the user
the last connection status, situation of the e-bike in the map, battery,
consume, etc. Also is stored information about any error in the bike
that the protocol could be able to send including, location in the map of
error, error code, time, status of the e-bike and description if available.
e-bike status
Friendly setup for the user in order to include personal information like,
preferences (sport, performance, trekking), edge, weight, gender,
maximum heard rhythm, etc.
Setup Control & Wizard
*Depending of information present in the BUS protocol
25of
Corporative – Extend V. 2016
System User Integration
1
AUTOMATIC INTEGRATIONThe APP can be integrated with Facebook user system and STRAVA (optional). When we do that, we store a token (or link) to the user information in the external user system (FB or STRAVA). The advantage is that the user do not need give to us his user and password and is identified.
2 3
STRAVA INTEGRATIONIs the APP is integrated with STRAVA, when a user finish the activity all the track information is delivery to STRAVA, so the user can use STRAVA as viewer of activities and use the SEGMENT system.
25of
Corporative – Extend V. 2016
42
Ebikemotion® APP - Functions and Features Included, Controller Integration
The MPS “Motor Profile System” is a function that leaves to the user to select different profiles for the controller if it support that
function. There are 2 different scenarios, the simple one leaves to select the profile, and the second one, more simple, leaves to
control the MAX current that the controller gives to the e-bike changing completely the response of the e-bike. The basic parameters
to be modify are: Current/Torque and Acceleration.
By Default the controller always stars in ECO and secure mode. The user can modify the mode by the APP when the e-bike has
switched on.
New ebikemotion
Controller 2016
Sometimes the rider would like to use the e-bike for different things, in different tracks and with different people. It will be a dreams just to modify
by one button the performance of the e-bike to get different riding performance. Ebikemotion APP supports that.
With the new ebikemotion®
motor controller that will comes
in the beginning of 2016, it will
be possible to make the setting
up of the profiles by a graphic
way.
25of
Corporative – Extend V. 2016
43
Ebikemotion APP - Specifications
• Minimum 512MB RAM
• 60 MB free space in the ROM (without maps)
• Recommended 1 GHz Processor or greater
• Android 4.3 or upper
• Bluetooth® 4.0 or BLE compatible
• Apple iPhone 4S or greater ( iOS 7.1.2 / 8 or greater)
• Recommended 3G connection but also can operate off-line (some features will be not
available as weather)
• OFF-Line MAPS based in OpenStreeMaps
• Online Weather information based in OpenWeatherMaps
• Main functions controlled by MANUFACTURER iWoc® joystick
• Support Voice Commands and TTS
The iWoc® RC (Remote
Control) can be able to
control by remote the APP
Eb
ike
mo
tio
n®
AP
P V
2.0
Eb
ike
mo
tio
n®
AP
P V
1.0
DISCONTINUED
Ebikemotion® Dealer APPUsing the SmartPhone as diagnostic, Activation and e-bike parts
control tool
25of
Corporative – Extend V. 2016
45
Ebikemotion® Dealer APP
Activation and Advanced Process, forget the Interfaces
Dealer APP will leave to dealer activating the e-bike just to user test, make a diagnostic or install and activate any accessory using a simple
smartphone with Bluetooth®
OEM control of e-bikes in Dealers
Our system will leave to you to control manufacturing dates, serial numbers, parts involved in one e-bike, send in transport mode, managing
guaranties, avoid losing and giving better service
Examples of the new EbikeMotion
APP 2.0
After the login the Dealer use one
Smartphone to connect to the e-bike
by Bluetooth®
The e-bike check in the ebikemotion®
Server if the Dealer has a active
account to check and review e-bikes
for the e-bike of certain OEM that is
checking.
Will be compulsory in the sell process
to activate the e-bike. During that
process the APP collect a lot of
information of the e-bike and send
that to the backend for the OEM
management.
Dealers APP – Main Options after login
Dealers APP - Diagnosis
Ebikemotion® user Web BackendWeb interface for the Activity and Status of the System
25of
Corporative – Extend V. 2016
Web user Web Backend - More that APP and Hardware
ebikemotion® APP software platform also includes the user
backend. ebikemotion® has developed a complete Internet
system with one DATABASE based in MySQL and PHP web APP
installed in the ebikemotion® Technologies dedicated servers for
the APP users. Our develop and design, totally responsive, is
based in friendly stylesheets that will leave to us to grow in the
future using the feedback of the user experience.
The user backend will use same user system than the smartphone
APP keeping both systems totally synchronized. By that way the
user can gets the EBIKES APP experience including a complete
software system that combines the information of APP
smartphone and web-page.
For getting a user backend experience
please go to:
http://dashboard.ebikemotion.com
http://ebike-dev.der.usal.es/elby/login.php
25of
Corporative – Extend V. 2016
Web user WEB Backend - Functions and Features Included
This system leaves to the user change personal parameters of the APP
and Website and keep both systems synchronized with same
information (Age, height, Language, friends, ranking, performance,
smartphone data and bicycle data as serial numbers of motor controller,
etc.)
Database with all personal, friends and public activities with graphic
maps, special points represented in area or line chars, pictures,
descriptions, details and comments of the rest of users. (It includes and
advanced search and recommendation engine). Automatic
synchronization with Smartphone APP.
Facebook or Strava user system compatible as well as our own
ebikemotion® user structure for MANUFACTURER. The control of users
will be full of MANUFACTURER, that will get access just
MANUFACTURER’S users.
User Configuration Control Panel
Routes & Tracks at detail
User System
It is a graphic view as a time line with all the activities made by user
day by day with a little resume and totalize of the sum of the view. The
user can customize and export graphic data and it is automatic
synchronized with the Smartphone APP.
The calendar leaves to you plan one event and configure the date in
the calendar, who could be able to see the information, open a
subscription system and associate a track to it. The system include a
mobile push system to advise to the users of invitation and events
e-bike panel control with maintenance information (Battery cycles of
charge, malfunctions, log, etc.)*
Activity Summary
Calendar of Events
e-bike and Maintenance Control Panel
Special advertisement area controlled by MANUFACTURER (for include
publicity depending of profile of user)
Look Advertisement Area based in user Segmentation
*Depending of information present in the BUS protocol
25of
Corporative – Extend V. 2016
Web user Web Backend – The HELP Center
The Help Center is and easy solution for the Manufacturer to keep the technical information updated of the APP, backend, hardware, etc.
Basically is dynamic web page based in a Content Management system that leave total control of the content by a simple web browser. The
user can open the HELP CENTER directly from the APP that can goes to special parts of it, and also it is available by Internet on-line web
browser.
It is an easy way to keep updated the user about any new feature of the system and to make banner and advertisements also of easy way.
For getting a user backend experience
please go to:
http://help.ebikemotion.com
Ebikemotion® Manufacturer BackendWeb interface for the User/Hardware Control and
Advertisements
25of
Corporative – Extend V. 2016
Included in the ebikemotion® WEB APP is also the administration
backend. We have added some important services in the
administration side to recover important user information for your
marketing teams and at the same time to use part of that
information for automatic advertisements functions inside the
user backend personalized for each user.
User and hardware control in combination
with advertisement never was so easy
Manufacturer Back End
25of
Corporative – Extend V. 2016
Manufacturer Backend - Functions and Features Included
Especial function included in the backend to generate list of users
based on ranking and performance profile. Our system create a ranking
based in kilometers, speed on them type of bicycle, gender, terrain and
times that users takes to make similar routes. The groups of users
could be exported in EXCEL FILE
Special function for the administrators to associate one advertisement
banner based in one picture to be shown in the user backend
depending of user performance or type of bike segmentation. The
system will leave to associate 3 banners per segment that will be
shown by random way in the user dashboard.
Administration profiles fully managed by MANUFACTURER team.
Capability to modify or delete contents that will be not inside the EULA
of the APP and users backend. Must be at lease these profiles for
MANUFACTURER: MARKETING, EVENTS, CONTROL PANEL. One user
can be able to own to different profiles at the same time that will
activate access to different administration areas.
User Segmentation Utility - Performance
Automatic Advertisements
MANUFACTURER admin User System
This function leaves to the administrators gets list of user based in
Gender and type of bicycle. Types of bicycles must be supplied and
coordinated with MANUFACTURER team and must be based in QR
sticker of the bicycle. The groups of users could be exported in EXCEL
FILE
The administrators can be able to generate special events that will
appears in all user calendars of the system.
MANUFACTURER could be able to access to the Maintenance Control
panel of any user of the system for control or support actions.
MANUFACTURER can generate an special internet HASH address to be
send to one dealer to consult the LOG* of one bike for support task for
a limited period of time.
User Segmentation – Type of Bike
Calendar of Events
e-bike and Maintenance Control Panel
*Depending of information present in the BUS protocol
Especial system for MANUFACTURER that will send automatically
messages to the email of the registered users about any service task
that must be realized in the e-bike. At the same time it is possible to
send one special alert to a group of users identify by any group of IDs
that could be able to import by EXCEL file ( Ex. Campaigns)
Service Alerts Management SystemMANUFACTURER will be able to access to any technical e-bike
information of the bicycles of the users in the system. By this way, it
will be really easy to search any user or bicycle by name of user, or ID
of bicycle, as well to make advance searches to find motors by example
that has more than a number of kilometers given, number of cycles of
charge in order to detect bicycles without maintenance.*
e-bike User Monitoring System
Ebikemotion® and YouNow is your time, you have the opportunity to ride to the future