A

Report on

Application’s of PLC and SCADA

26th -30rd April, 2016

Course Co-ordinator Dr. R. H. Chile

Dr. S. T. Hamde

Course Co-Coordinator Mr. J. G. Parkhe

Department of Instrumentation Engineering Shri Guru Gobind Singhji Institute of Engineering & Technology, Nanded

A five days workshop on “Application’s of PLC and SCADA” was held

during 26th - 30th April 2016, organized by Department of Instrumentation

Engineering at Shri Guru Gobind Singhji Institute of Engineering &

Technology, Vishnupuri, Nanded, an autonomous institute affiliated to the

Government of Maharashtra state. It was sponsored by Technical Education

Quality Improvement Program phase-II (TEQIP-II) of Government of India.

The workshop focused on practical aspect of role of PLC and SCADA in

Core Industries. The workshop was entirely planned and coordinated by

Dr. R. H. Chile, Dr. S. T. Hamde and Mr. J. G. Parkhe. Experts for the workshop

were Mr. Venkata Sarath and Mr. Sayed MD Asadur Rahman, Innovians

Technology, Noida, U. P.

The inaugural function of the workshop was held at 09.30 AM on

April 26, 2016. The inauguration accomplished in the presence of the invited

experts Mr. Venkata Sarath and Mr. Sayed MD Asadur Rahman,

Dr. V. G. Asutkar, Head, Department of Instrumentation Engineering,

Dr. R. H. Chile, Dr. S. T. Hamde Professor, Department of Instrumentation

Engineering. The inauguration was anchored by Ms. Kalyani Aundhekar,

Student from Department of Instrumentation Engineering.

The Day 1 included the session on introduction to PLC, types of PLCs

and programming PLCs. During this session SCADA development tools and

PLC programming tools are summarized. Installation of Micrologics 1200c a

PLC programming tool was covered during this session.

The day 2 is covered with continuation of SCADA development for basic

applications. Theoretical session with hands on training regarding SCADA

developing tool was discussed throughout the day.

The day 3 and day 4 included PLC programming for various

applications. The industrial applications are covered during this session.

The Day 5 focused on more practice on PLC programming, SCADA

development and Human Machine Interface.

The fifth day was concluded by valedictory function with felicitation of

experts, followed by HOD and faculty member’s address and certificate

distribution. The students gave feedbacks about the workshop and the

function ended with vote of thanks.

Around 48 students from T.Y. B.Tech Instrumentation actively participated in

the workshop.

Photo Gallery:

A

Report on

The Finishing School

On

Basics of Field Instrumentation

20th -23rd July, 2015

Course Co-ordinator Dr. L. M. Waghmare

Department of Instrumentation Engineering Shri Guru Gobind Singhji Institute of Engineering & Technology,

Nanded

The Finishing School on Basics of Field Instrumentation was held during

20th -23rd July 2015, organized by Department of Instrumentation

Engineering at Shri Guru Gobind Singhji Institute of Engineering &

Technology, Vishnupuri, Nanded, an autonomous institute affiliated to the

Government of Maharashtra state. It was sponsored by Technical Education

Quality Improvement Program phase-II (TEQIP-II) of Government of India.

The workshop focused on practical aspect of Field Instrumentation and

automation deployed in Core Industries. The workshop was entirely

planned and coordinated by Dr. L. M. Waghmare. Experts for the workshop

were Mr. Santosh Sonar, Instrumentation and Automation Consultant,

SPANJ Tech Solutions, Pune and Mr. Vishwas Kurundkar, Director,

Eklakshya R&D Centre, Pune.

The inaugural function of the workshop was held at 11.00 AM on July 20,

2015. The inauguration accomplished in the presence of the invited experts

Mr. Ashutosh Kshirsagar & Mr. Vishwas Kurundkar, Dr. V. G. Asutkar, Head,

Department of Instrumentation Engineering, Dr. S. T. Hamde., Professor,

Department of Instrumentation Engineering. The inauguration was

anchored by Ms. Roopali Biyani, Faculty of Department of Instrumentation

Engineering.

The Day 1 included the session on various opportunities for the

Instrumentation Engineer, Different roles in the Industries, key drivers for

Success in industries, What is project & project site, Project Life Cycle

Management of process industry, how instrumentation engineering takes

place in process industry.

The day 2 covered the various topics like Basics of Instrumentation in

Industries, What is P&ID & how to design instrumentation schemes – open

loops, close loops & process controls – feedback controls, cascade

controls, ratio controls, interlocks etc with various operational modes –

manual, automatic etc.,

The Day 3 included various types of field instruments commonly used in

industries for measurements – Temperature, Pressure, Flow, Level and

Control Valves. Various aspects & milestones in the project

management such as proposals, contracts, scheduling, completion etc.

and practical in groups on project management & mock interviews to

understand the learning. Day 1, 2, 3 were covered by the industry expert

Mr. Santosh Sonar.

The Day 4 focused on soft skill development and communication skills.

Effective Resume writing, group discussions, public speaking, innovative

project ideas. Mr. Vishwas Kurundkar was the expert on the Day 4.

Feedback forms were distributed to students by the experts in the

concluding session. Few students also gave good feedbacks orally regarding

the workshop. The workshop gave a brief exploration to few of the aspects

of Industrial Instrumentation and helped the students to correlate the

theory with practice followed in Industries.

Around 65 students from T.Y.B.Tech Instrumentation, Final Year B.Tech

Instrumentation actively participated in the workshop.

Photo Gallery: