cp3660 tds en - lumca · ordering example: lu-mc2 40-24 26w 40k 120 bk fp-bk click on i for more...
TRANSCRIPT
Ordering example: LU-MC2 40-24 26W 40K 120 BK FP-BK
Click on for more informationi
Date Project nameCity / Location
QTYType
Lumca reserves the right to modify the elements on this technical data sheet without prior notice.
T : 877.650.1693 | www.lumca.com
Column, Height & Source i Colour (main) Anchor Bolts
By LUMCA
By others
Existing
- 4000K (40K), RGB.
- 6.5 watts / feet / side.
- 450 lumens / feet / side.
- 175 mA.
- IP66.
- CSA / CSA-US certified.
8.375" [213mm]
4" [1
02m
m]
Ø2.5"[64mm]
ANCHOR BASE PLATE:
Recommended bolts : 3/8 -16 × 12"Projection : 1.75" [45mm]
Voltage
� � �� �
Colour (front panels)
FP-
Light source on 1 side
Light sources on both sides
LU-MC2LU-MC1
Options
BTP (LU-MC1 only)Button Type Photocell
SGP10Surge Protection (10kV)
SGP20Surge Protection (20kV)
DMX - RGB decoder (controller by others)
24"
[610
mm
]40
" [1
006m
m]
48"
[121
9mm
]24
" [6
10m
m]
80"
[203
2mm
]48"
[121
9mm
]
100"
[254
0mm
]60
" [1
524m
m]
120"
[304
8mm
]72
" [1
829m
m]
60"
[152
4mm
]36
" [9
14m
m]
Lumca reserves the right to modify the elements on this technical data sheet without prior notice.
T : 877.650.1693 | www.lumca.com
LU-MC1 : 40-24 13W 48-24 13W 60-36 20W 80-48 26W 100-60 33W 120-72 39W
LU-MC2 : 40-24 26W 48-24 26W 60-36 39W 80-48 52W 100-60 65W 120-72 78W
WM(Canadian
Maple)
WR (California Redwood)
HOUSINGCast aluminium decorative lid mechanically held to the structure without any visible screws. It contains the optical system. All cast aluminium parts are made of A356 alloy, free of porosity and impurities. All the castings have a minimum wall thickness of 0.188"[4.75mm]. All extruded aluminium parts are made of 6061-T6 alloy. All hardware is in stainless steel.
OPTICAL SYSTEMHigh intensity white LED (Light emitting diodes) sealed (IP66). 4000k system consumption: 6.5 watts / feet / side.RGB system consumption: 9 watts / feet / side.
ACRYLIC LENSBacklit decorative white opaline acrylic lens 3/16" [4.76mm] thick.
ELECTRICAL COMPONENTSConstant current, -40°C [-40°F] to 80°C [176°F], PF 0.99, 0-10v, 120 to 277v (other voltages, consult factory).
FINISHPowder coating minimum thickness 100 microns, ASTM D2247 5000 hours salt spray test. All metallic parts are pre-treated using an environmentally friendly organic phosphating technology (PLAFO-RIZATION) before a polyester powder coating is electrostatically applied. The finish is of 100 microns minimal thickness and meets the ASTM B117 regulation related to salt spray and the ASTM D2247 regulation related to the resistance of the finishes exposed to a 100% relative humidity. RAL and Custom colour matches available.
FRONT PANELS (FP)Decorative aluminium panels, can be painted in a different colour. (WR) Californian Redwood or (WM) Canadian Maple wood finish also available.
Technical informations� � �� �