CS4010 AND CS4011 ALIGNMENT REFERENCE MANUAL

FM MOBILE TRANCEIVER

Connect Systems Incorporated 1802 Eastman Ave., Suite 116

Ventura CA 93003

Version 1.00

Copyright 2010 by Connect Systems Incorporated

TABLE OF CONTENTS

OPENING SCREEN............................................................................................................................ 3

TUNING SELECTION SCREEN ........................................................................................................... 4

FREQUENCY STABILIZATION ........................................................................................................... 5

TX HIGH POWER.............................................................................................................................. 6

TX MID POWER ............................................................................................................................... 7

MAX AUDIO DEVIATION ................................................................................................................. 9

SINGLE DEVIATION........................................................................................................................ 10

DTMF DEVIATION.......................................................................................................................... 11

MSK DEVIATION............................................................................................................................ 12

DCS BALANCE ................................................................................................................................ 13

DCS DEVIATION ............................................................................................................................. 14

QT (67 Hz) DEVIATION .................................................................................................................. 15

QT (254 Hz) DEVIATION ................................................................................................................ 16

RX SENSITIVE ................................................................................................................................. 17

SQ9 (OPEN) ................................................................................................................................... 18

SQ9 (CLOSED) ................................................................................................................................ 19

SQ1 (OPEN) ................................................................................................................................... 20

SQ1 (CLOSED) ................................................................................................................................ 21

RSSI 1 ............................................................................................................................................. 22

RSSI 4 ............................................................................................................................................. 23

VOX GAIN 1 ................................................................................................................................... 24

VOX GAIN 10 ................................................................................................................................. 25

To use the tuning mode, the following two null files have to be inserted into the directory running the program: 8200edbg.txt 8200etbg.txt These files can be created with any text editor such as NOTEPAD or WORD.

OPENING SCREEN

Press “Enter Modulate Mode” button to start the alignment or press “Exit” button to go back to the parameter programming mode.

TUNING SELECTION SCREEN The fundamental screen necessary to understand the alignment is shown below. The dealer should not normally have to use the alignment screens but if they do we are providing sufficient information on what parameters can be adjusted. The alignment of a radio requires specialized test equipment and the tuning of these various parameters should not be done without the proper test equipment. Setting the parameters improperly could make the radio non FCC compliant.

The available tuning screen are as follows: Frequency Stabilization QT (254 Hz) Deviation Tx High Power Rx Sensitive Tx Mid Power SQL9 (OPEN) Tx Low Power SQL9 (Close) Max Audio Deviation SQL1 (OPEN) Single Deviation SQL1 (Close) DTMF Deviation RSSI 1 MSK Deviation RSSI 4 DCS Balance VOX Gain 1 DCS Deviation VOX Gain 10 QT (67 Hz) Deviation

FREQUENCY STABILIZATION

TX HIGH POWER

TX MID POWER

TX LOW POWER

MAX AUDIO DEVIATION

SINGLE DEVIATION

DTMF DEVIATION

MSK DEVIATION

DCS BALANCE

DCS DEVIATION

QT (67 Hz) DEVIATION

QT (254 Hz) DEVIATION

RX SENSITIVE

SQ9 (OPEN)

SQ9 (CLOSED)

SQ1 (OPEN)

SQ1 (CLOSED)

RSSI 1

RSSI 4

VOX GAIN 1

VOX GAIN 10