csun_datasheet-20120229-english.pdf
Post on 14-Sep-2015
245 views
TRANSCRIPT
-
TV Rheinland 240W-260WIEC61215 IEC61730
Intertek 240W-275WUL1703
Power RangeTest StandardCertification Authority
PSAR solar cell, using novel technology and selected raw material, improves light response effectively and result in higher conversion efficiency at low cost of ownership.
Combined with the high quality wafer, new technology updated from conventional production process narrows the distribution of conversion efficiency and brings more advantages to the quality control.
In addition, PSAR technology adapts other new technology developed by CSUNs R&D center to improve conversion efficiency continuously.
Equipped with high-efficiency mono-like PSAR cells.
Extended module power range up to 260w (60pc layout).
Lower Light Induced Degradation (LID) means stable power output and better system yield after long-term operation.
Centralized power distribution.
PSAR solar cell, using novel technology and selected raw material,
Description:
Equipped with high-efficiency mono-like PSAR cells.
Features:
Guarantee
TV Rheinland
Certification Autho
Certificates
Product workmanship: 10 years
Novel TechnologyWhich from very initial stage to achieve excellent crystal purity and conformity, combine with CSUN leading technologies, as result of high- efficiency PSAR products.
High Profitability and PaybackMore power contributed from each single panel, more system cost might be saved, and better payback we convinced.System Cost Reduce Significantly: Less panels, less initial installation cost; Less panels, less Maintenance cost during life cycle.
Carefully selected subsidiary material allows maximum light permeability and impact-resistance.
Low power tolerance of 3%;
12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%*
is the trade mark owned by CSUN. Its the brand name of polycrystalline solar module produced by CSUN.
-
BA A
860(
33.8
5)
1360
(53.
52)
10x10(0.39x0.39)Drainage holes4 places
14x9(0.55x0.35)Mounting slots8 places
6(0.24)Ground holes2 places
940(37)
Junction box
BACK VIEW
Note:mm(inch)
1640
(64.
54)
990(38.96)
FRONT VIEW
9(0.35)
35(1.38)
14(0
.55)
1.8(
0.0/
1)
B
10(0.39)
A-A
40(1
.58)
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm(1inch) with impact speed of 23 m/s (51.2mph)
40 C to + 85 C
Maximum surface load capacity
Hail
Temperature range
Dimensions(LWH) Container 20 Container40Container20HC Container40HC
300 324 700 756164099040mm
Note:mm(inch)
tested up
maximum dia
e load capacityMaximum surface load
Hail
The electrical data relates to standard test conditions [STC]: 1,000 W/m; AM 1,5; 25C. performance deviation of Pmpp: 3%. performance deviation of Voc[V],Isc[A],Vmpp [V] and Impp [A]: 10%. certified in accordance with IEC 61215, IEC 61730-1/2and UL 1703.
0
2
4
6
8
0 10 20 30 400
50
100
150
200
250
Cur
rent
/A
Voltage/V
200W/m2
25oC
400W/m2
600W/m2
800W/m2
1000W/m2
Pow
er/W
0 10 20 30 400
2
4
6
8
0
50
100
150
200
250
Voltage/V
Cur
rent
/A
0oC 25oC 50oC 75oC
AM 1.5,1000W/m2
Pow
er/W
Specifications of CSUN 250-60P PSAR module
IV Curve
Dimensions
Operating Condition & Packaging
Maximum system voltage [V]
Current temperature coefficient
Series fuse rating[A]
Junction box
Front glass
Back sheet
Dimensions
Voltage temperature coefficient
Power temperature coefficient
Cable
Cell encapsulation
Frame
Cells
Module type
Pmpp [W] Voc [V] Isc [A] Vmpp [V] Impp [A] Practical module efficiency Module efficiency
Maximum surface load capacityHail Temperature range
1000
+0.06%/K
20
CSUN 260 -60P
38.0
30.6
260
9.01
8.5017.8% 16.02%
-0.37%/K
-0.5%/K
610 pieces polycrystalline solar cells series strings (156mm156mm) with 6 bypass diodes length 900 mm, 14 mmWhite toughened safety glass, 3.2 mm EVA (Ethylene-Vinyl-Acetate) composite film Anodized aluminum profile 164099040mm (LWH) 5,400 Pa maximum diameter of 25 mm with impact speed of 23 ms 40 C to + 85 C
37.9
30.4
255
8.92
8.3917.46%15.71%
CSUN 255 -60P
37.7
30.2
250
8.83
8.2817.12%15.40%
CSUN 250 -60P
37.5
30
245
8.75
8.1716.78%15.09%
CSUN 245 -60P
37.3
29.8
240
8.64
8.0616.44%14.78%
CSUN 240 -60PElectrical typical data
PSAR 260Module name PSAR 255 PSAR 250 PSAR 245 PSAR 240
Weight 19.1kg
is the trade mark owned by CSUN. Its the brand name of polycrystalline solar module produced by CSUN.
-
260SERIES
In addition, QSAR technology is easy to combine with other technologies developed by CSUN to improve efficiency further.
Product workmanship: 10 years
CSUN255-60MCSUN260-60MCSUN265-60MCSUN270-60M
Average Cell Efficiency
QSAR
19%
Features
Guarantee
TV Rheinland
Power Range
255W-270W
Test Standard
IEC61215 IEC61730
Intertek 255W-275WUL1703
CertificatesCertification Authority
QSAR solar cell improves solar light response by restricting the recombination of light-induced holes and electrons, based on a novel fully emitter passivation technology, to obtain a single side PN at low temperature.
QSAR technology can deliver you much higher conversion efficiency, in a more simplified process. We successfully cut the production links and narrow the distribution of efficiency performance, to achieve better quality control.
Higher power output than conventional solar modules;
Narrow distribution of conversion efficiency;
Concentrated current distribution performance;
Less mismatch;
Simplified process and better quality control.
is the trade mark owned by CSUN, also the brand name of high efficiency solar module produced by CSUN. From March 2012, CSUN will change QUASAR originally used into QSAR.
12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%*
-
Note:mm(inch)10x10(0.39x0.39)Drainage holes4 places
9(0.35)
35(1.38)
14(0
.55)
1.8(
0.07
)
1640
(64.
54)
940(37)990(38.96)
Junction box
B
10(0.39)
A-A
B
A A
14x9(0.55x0.35)Mounting slots8 places
6(0.24)Ground holes2 places 86
0(33
.85)
1360
(53.
52)
Dimensions(LWH) Container 20 Container40Container20HC Container40HC
756
Open Circuit Voltage (Voc)
Optimum operating Voltage (Vmpp)
Maximum system voltage [V]
Current temperature coefficient
Series fuse rating[A]
Junction box
Front glass
Back sheet
DimensionsWeight
1000
+0.039%/K
20
with 6 bypass diodes
White toughened safety glass, 3.2 mm
composite film
164099040mm [64.5738.981.57inch] (LWH)
Module name
Peak Power (Pmpp)
Short Circuit Current (Isc)
Optimum operating Current (Impp)
Module efficiency
Voltage temperature coefficient
Power temperature coefficient
Cable
Cell encapsulation
Frame
Cells
CSUN 270-60M
38.3
31.2
QSAR 270
270
9.07
8.65
16.63%
-0.307%/K
-0.423%/K
610 pieces monocrystalline solar cells series strings (156mm156mm)
length 900 mm, 14 mm
EVA (Ethylene-Vinyl-Acetate)
Anodized aluminum profile
Module type
19.1kg (42.1lbs)
0 10 20 30 400
2
4
6
8
10
Voltage[V]
Powe
r[W]
1000w/m2
800w/m2
600w/m2
400w/m2
200w/m2
0
50
100
150
200
25025oC
Curre
nt[A]
0 10 20 30 400
2
4
6
8
10
Curre
nt[A]
Voltage[V]
70oC 55oC 40oC 25oC 10oC
0
50
100
150
200
250
300
Powe
r[W]
AM1.5 1000W/m2
Dimensions
Packaging
Specifications
IV Curve
BACK VIEWFRONT VIEW
38.2
31.0
265
8.98
8.55
16.32%
QSAR 265
CSUN 265-60M
38.1
30.8
260
8.90
8.44
16.02%
QSAR 260
CSUN 260-60M
38.0
30.7
255
8.82
8.30
15.71%
QSAR 255
CSUN 255-60M
164099040mm 300 324 700
40(1
.57)
The electrical data relates to standard test conditions [STC]: 1,000 W/m; AM 1,5; 25C.Performance deviation of Pmpp: 0~3%; Performance deviation of Voc, Isc, Vmp and Imp: 10%.Certified in accordance with IEC61215, IEC61730-1/2 and UL1703.
is the trade mark owned by CSUN, also the brand name of high efficiency solar module produced by CSUN. From March 2012, CSUN will change QUASAR originally used into QSAR.
-
Quality and Certificates
CSUN195-48P
Features
10-year limited product warranty;
25-year power output warranty.*
Certifications**:
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUNs life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
Highest Module Efficiency: 14.92%
48 High-Efficiency Polycrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Black backsheet or black frame is also available.
12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%
***
Note: All specifications, warranties, certifications about module of CSUN series also apply to that of SST.
Certification Authority
TV Rheinland
MCS
Power Range
175W-205W
175W-205W
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
CGC 190W-230WIEC61215 IEC61730
SO LAR
-
Operating Condition & Packaging
Specifications
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm(1inch) with impact speed of 23 m/s (51.2mph)
40 C to + 85 C
Electrical typical data
IV-Curves
Dimensions
Maximum surface load capacity
Hail
Temperature range
Dimensions(LWH) Container 20 Container40Container20HC Container40HC
132099035mm 448 480 946 1014
Type
Pmpp [W]
Voc [V]
Isc [A]
Vmpp [V]
Impp [A]
Practical module efficiency
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating [A]
Cells
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Maximum surface load capacity
Hail
Temperature range
195-48P
195
29.6
8.67
23.8
8.19
16.69%
14.92%
1000
-0.292%/K
+0.045%/K
-0.408%/K
20
68 pieces polycrystalline solar cells series strings (156mm156mm)
with 6 bypass diodes
length 900 mm, 14 mm2
White toughened safety glass, 3.2 mm
EVA (Ethylene-Vinyl-Acetate)
Composite film
Anodized aluminum profile
132099035mm(LWH)
5400 Pa
maximum diameter of 25 mm with impact speed of 23 ms-1
40 C to + 85 C
190-48P
190
29.5
8.61
23.7
8.02
16.27%
14.54%
185-48P
185
29.4
8.57
23.6
7.84
15.84%
14.16%
180-48P
180
29.2
8.43
23.4
7.70
15.41%
13.77%
175-48P
175
29.0
8.26
23.2
7.55
14.98%
13.39%
The electrical data relates to standard test conditions [STC]: 1,000 W/m; AM 1,5; 25C.Performance deviation of Pmpp: 3%. performance deviation of Voc[V],Isc[A],Vmpp [V] and Impp [A]: 10%.Certified in accordance with IEC 61215, IEC 61730-1/2 and UL 1703.
35(1.38)
35(1
.38)
10(0.39)
1.5(
0.05
9)
A-AJunctionbox
540(
21.2
5)
1040
(40.
93)
A A
B
9(0.35)
14(0
.55)
B
940(37)
BACK VIEW
990(38.96)
1320
(51.
95)
FRONT VIEW
Note:mm(inch)Drainage holes4 places
Mounting slots8 places
88 (0.310.31)
149 (0.550.35)
6(0.24)Ground holes2 places
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
-
CSUN200-48M
Features
Quality and Certificates
12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%
***
Note: All specifications, warranties, certifications about module of CSUN series also apply to that of SST.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUNs life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
10-year limited product warranty;
25-year power output warranty.*
Certifications**:
48 High-Efficiency Monocrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Black backsheet or black frame is also available.
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Highest Module Efficiency: 15.69%
Certification Authority
TV Rheinland
MCS
Power Range
175W-215W
175W-215W
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
CGC 190W-230WIEC61215 IEC61730
SO LAR
-
Specifications
The electrical data relates to standard test conditions [STC]: 1,000 W/m; AM 1,5; 25C.Performance deviation of Pmpp: 3%. performance deviation of Voc[V],Isc[A],Vmpp [V] and Impp [A]: 10%.Certified in accordance with IEC 61215, IEC 61730-1/2 and UL 1703.
1000
-0.307%/K
+0.039%/K
-0.423%/K
20
68 pieces monocrystalline solar cells series strings(156mm156mm)with 6 bypass diodes
length 900 mm, 14 mm 2
White toughened safety glass, 3.2 mm
EVA (Ethylene-Vinyl-Acetate)
Composite film
Anodized aluminum profile
132099035mm [51.97x38.98x1.38inch] (LWH)
Type
Pmpp [W]
Voc [V]
Isc [A]
Vmpp [V]
Impp [A]
Module efficiency Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating[A]
Cells
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions5400 PaMaximum surface load capacity
maximum diameter of 25 mm with impact speed of 23 ms-1Hail 40 C to + 85 CTemperature range
Operating Condition & Packaging
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm with impact speed of 23m/s (51.2mph)
40 C to + 85 C
Maximum surface load capacity
Hail
Temperature range
IV-Curves
Dimensions
Dimensions(LWH) Container 20 Container40Container20HC Container40HC
132099035mm 448 480 946 1014
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
205-48M
205
30.0
8.86
24.2
8.47
15.69%
200-48M
200
29.9
8.78
24.1
8.30
15.31%
195-48M
195
29.7
8.71
23.9
8.16
14.92%
190-48M
190
29.6
8.59
23.8
7.99
14.54%
185-48M
185
29.4
8.50
23.7
7.81
14.16%
Practical module efficiency 17.87% 17.44% 17.00% 16.57% 16.13%
A A
540(
21.2
5)
1040
(40.
93)
Junction box
B
B
35(1
.38)
10(0.39)
14(0
.55)
9(0.35)
35(1.38)
1.5(
0.05
9)
A -A
940(37)
BACK VIEW
990(38.96)
1320
(51.
95)
FRONT VIEW
Note:mm(inch)
Drainage holes4 places
Mounting slots 8 places
Ground holes 2 places
88 (0.310.31)
149 (0.550.35)
6(0.24)
Electrical typical data
-
CSUN200-72M
Features
Quality and Certificates
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Highest Module Efficiency: 16.06%
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUNs life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
10-year limited product warranty;
25-year power output warranty.*
Certifications**:
72 High-Efficiency Monocrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Black backsheet or black frame is also available.
12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%
***
Note: All specifications, warranties, certifications about module of CSUN series also apply to that of SST.
Certification Authority
TV Rheinland
TV InterCert
UL
Intertek
CEC
FSEC
MCS
Power Range
170W-200W
160W-200W
170W-195W
170W-210W
160W-190W
160W-195W
170W-200W
Test Standard
UL1703
IEC61215 IEC61730
IEC61215 IEC61730
UL1703
IEC61215 UL1703
IEC61215 UL1703
IEC61215 IEC61730
CGC 170W-200WIEC61215 IEC61730
SO LAR
-
Specifications
Operating Condition & Packaging
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm with impact speed of 23 m/s (51.2mph)
40 C to + 85 C
Maximum surface load capacity
Hail
Temperature range
Dimensions(LWH)
IV-Curves
Dimensions
B
158080835mm
Container 20 Container40Container20HC Container40HC
384 408 896 952
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Note:mm(inch)8x8(0.31x0.31)
10(0.39)
9(0.35)
35(1.38)
800(
31.4
9)
1.5(
0.05
9)
14(0
.55)
35(1
.38)
1580
(62.
2)
14x9(0.55x0.35)
6(0.24)
758(29.83)808(31.8)
Drainage holes4 places
Junction box
B
A A
Mounting slots8 places
Ground holes2 places 13
00(5
1.16
)
FRONT VIEW BACK VIEW
A-A
Electrical typical data
Type
Pmpp [W]
Voc [V]
Isc [A]
Vmpp [V]
Impp [A]
Practical module efficiency
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating [A]
Cells
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Maximum surface load capacity
Hail
Temperature range
205-72M
205
45.6
5.82
38.0
5.40
18.39%
16.06%
1000
-0.307%/K
+0.039%/K
-0.423%/K
10
612 pieces monocrystalline solar cells series strings (125mm125mm)
with 3 bypass diodes
length 900 mm, 14 mm2
White toughened safety glass, 3.2 mm
EVA (Ethylene-Vinyl-Acetate)
composite film
Anodized aluminum profile
158080835mm (LWH)
5400 Pa
maximum diameter of 25 mm with impact speed of 23 ms-1
40 C to + 85 C
200-72M
200
45.3
5.72
37.6
5.32
17.94%
15.67%
195-72M
195
45.1
5.63
37.0
5.28
17.49%
15.27%
190-72M
190
45.0
5.56
36.5
5.21
17.05%
14.88%
185-72M
185
44.8
5.48
35.8
5.17
16.60%
14.49%
The electrical data relates to standard test conditions [STC]: 1,000 W/m; AM 1,5; 25C.Performance deviation of Pmpp: 3%. performance deviation of Voc[V],Isc[A],Vmpp [V] and Impp [A]: 10%.Certified in accordance with IEC 61215, IEC 61730-1/2 and UL 1703.
-
Quality and Certificates
CSUN215-54P
Features
10-year limited product warranty;
25-year power output warranty.*
Certifications**:
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUNs life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
Highest Module Efficiency: 14.67%
54 High-Efficiency Polycrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Black backsheet or black frame is also available.
12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%* Note: All specifications, warranties, certifications about module of CSUN series also apply to that of SST.
TV Rheinland
Intertek
MCS
190W-230W
180W-215W
190W-230W
**
Certification Authority Power RangeTest Standard
CGC 210W-255WIEC61215 IEC61730
IEC61215 IEC61730
IEC61215 IEC61730
UL1703
SO LAR
-
Specifications
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
IV-Curves
Dimensions
Operating Condition & Packaging
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm(1inch) with impact speed of 23 m/s (51.2mph)
40 C to + 85 C
Maximum surface load capacity
Hail
Temperature range
Dimensions(LWH) Container 20 Container40Container20HC Container40HC
148099040mm 350 378 750 810
700(
27.5
5)
1200
(47.
23)
B
A A
Note:mm(inch)
1480
(58.
25)
990(38.96)
FRONT VIEW
940(37)
10x10(0.39x0.39)Drainage holes4 places
Junction box
14x9(0.55x0.35)Mounting slots8 places
6(0.24)Ground holes2 places
BACK VIEW
9(0.35)
14(0
.55)
B
A-A
10.8(0.39)
1.8(
0.07
1)
40(1
.58)
Electrical typical data
Type
Pmpp [W]
Voc [V]
Isc [A]
Vmpp [V]
Impp [A]
Practical module efficiency
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating [A]
Cells
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Maximum surface load capacity
Hail
Temperature range
Weight
215-54P
215
33.3
8.62
26.6
8.08
16.36%
14.67%
1000
-0.292%/K
+0.045%/K
-0.408%/K
20
69 pieces polycrystalline solar cells series strings (156mm156mm)
with 6 bypass diodes
length 900 mm, 14 mm2
White toughened safety glass, 3.2 mm
EVA (Ethylene-Vinyl-Acetate)
composite film
Anodized aluminum profile
148099040mm (LWH)
5400 Pa
maximum diameter of 25 mm with impact speed of 23 ms-1
40 C to + 85 C
17.6kg
210-54P
210
33.2
8.54
26.5
7.93
15.98%
14.33%
205-54P
205
33.0
8.45
26.4
7.77
15.60%
13.99%
200-54P
200
32.8
8.36
26.2
7.64
15.22%
13.65%
195-54P
195
32.6
8.23
26.0
7.50
14.84%
13.31%
The electrical data relates to standard test conditions [STC]: 1,000 W/m; AM 1,5; 25C.Performance deviation of Pmpp: 3%. performance deviation of Voc[V],Isc[A], Vmpp [V] and Impp [A]: 10%.Certified in accordance with IEC 61215, IEC 61730-1/2 and UL 1703.
-
Quality and Certificates
CSUN225-54M
Features
10-year limited product warranty;
25-year power output warranty.*
Certifications**:
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUNs life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
Highest Module Efficiency: 15.36%
54 High-Efficiency Monocrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Black backsheet or black frame is also available.
Certification Authority
TV Rheinland
Intertek
MCS
Power Range
190W-245W
190W-245W
190W-245W
12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%* Note: All specifications, warranties, certifications about module of CSUN series also apply to that of SST.
CEC 190W-245W
**
CGC 210W-255WIEC61215 IEC61730
Test Standard
UL1703
IEC61215 IEC61730
IEC61215 IEC61730
IEC61215 UL1730
SO LAR
-
Operating Condition & Packaging
Specifications
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm(1inch) with impact speed of 23 m/s (51.2mph)
40 C to + 85 C
Maximum surface load capacity
Hail
Temperature range
Dimensions(LWH) Container 20 Container40Container20HC Container40HC
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
IV-Curves
Dimensions
148099040mm 350 378 750 810
A A
B
B
FRONT VIEW BACK VIEW
Note:mm(inch)Junction box
A-A
148
0(58
.25)
990(38.96) 940(37)
1010 (0.390.39)Drainage holes4 places
149 (0.550.35)Mounting slots 8 places
Ground holes 2 places
6(0.24)
700(
27.5
5)
1200
(47.
23)
14
0.55
9(0.35)
35(1.38)
10(0.39)
1.8(
0.07
1)
40(1
.58)
Electrical typical data
Type
Pmpp [W]
Voc [V]
Isc [A]
Vmpp [V]
Impp [A]
Practical module efficiency
Module efficiency
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating [A]
Front glass
Cells
Junction box
Cable
Cell encapsulation
Back sheet
Frame
Dimensions
Maximum surface load capacity
Hail
Temperature range
Weight
230-54M
230
33.7
8.90
27.3
8.42
17.82%
15.70%
-0.307 %/K
+0.039%/K
-0.423%/K
20
White toughened safety glass, 3.2 mm
69pieces monocrystalline solar cells series strings156mm156mmwith 6 bypass diodes
length 900 mm, 14 mm2
EVA (Ethylene-Vinyl-Acetate)
composite film
Anodized aluminum profile
148099040mm(LWH)
5400Pa
maximum diameter of 25 mm with impact speed of 23 ms-1
40 C to + 85 C
17.6kg
225-54M
225
33.6
8.84
27.1
8.30
17.44%
15.36%
220-54M
220
33.5
8.75
27.0
8.15
17.05%
15.02%
215-54M
215
33.4
8.62
26.9
7.99
16.67%
14.67%
210-54M
210
33.3
8.52
26.7
7.83
16.28%
14.33%
The electrical data relates to standard test conditions [STC]: 1,000 W/m; AM 1,5; 25C.Performance deviation of Pmpp: 3%. performance deviation of Voc[V],Isc[A],Vmpp [V] and Impp [A]: 10%.Certified in accordance with IEC 61215, IEC 61730-1/2 and UL 1703.
B
-
Quality and Certificates
CSUN245-60P
Features
10-year limited product warranty;
25-year power output warranty.*
Certifications**:
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUNs life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
Highest Module Efficiency: 15.40%
60 High-Efficiency Polycrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Black backsheet or black frame is also available.
12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%
***
Note: All specifications, warranties, certifications about module of CSUN series also apply to that of SST.
Certification Authority
TV Rheinland
Intertek
CEC
FSEC
MCS
Power Range
210W-255W
200W-240W
220W-240W
200W-240W
210W-255W
CGC 255W-305WIEC61215 IEC61730
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
UL1703
IEC61215 UL1703
IEC61215 UL1703
SO LAR
-
Operating Condition & Packaging
Specifications
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm(1inch) with impact speed of 23 m/s (51.2mph)
40 C to + 85 C
IV-Curves
Dimensions
Note:mm(inch) 10x10(0.39x0.39)
10(0.39)
9(0.35)
35(1.38)
860(
33.8
5)
1.8(
0.07
1)
14(0
.55)
40(1
.57)
14x9(0.55x0.35)
6(0.24)
940(37)990(38.96)
Drainage holes4 places
Junction box
B
B
A-A
A A
Mounting slots8 places
Ground holes2 places
1360
(53.
52)
Maximum surface load capacity
Hail
Temperature range
Dimensions(LWH) Container 20 Container40Container20HC Container40HC
300 324 700 756
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
FRONT VIEW BACK VIEW
1640
(64. 5
4)
164099040mm
Electrical typical data
Type
Pmpp [W]
Voc [V]
Isc [A]
Vmpp [V]
Impp [A]
Practical module efficiency
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating [A]
Cells
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Maximum surface load capacity
Hail
Temperature range
Weight
250-60P
250
37.3
8.81
29.9
8.36
17.12%
15.40%
1000
-0.292%/K
+0.045%/K
-0.408%/K
20
610 pieces polycrystalline solar cells series strings (156mm156mm)
with 6 bypass diodes
length 900 mm, 14 mm2
White toughened safety glass, 3.2 mm
EVA (Ethylene-Vinyl-Acetate)
composite film
Anodized aluminum profile
164099040mm (LWH)
5,400 Pa
maximum diameter of 25 mm with impact speed of 23 ms-1
40 C to + 85 C
19.1kg
245-60P
245
37.1
8.74
29.7
8.25
16.78%
15.09%
240-60P
240
36.9
8.67
29.6
8.11
16.44%
14.78%
235-60P
235
36.8
8.59
29.5
7.97
16.10%
14.47%
230-60P
230
36.7
8.52
29.4
7.83
15.75%
14.17%
The electrical data relates to standard test conditions [STC]: 1,000 W/m; AM 1,5; 25C.Performance deviation of Pmpp: 3%. performance deviation of Voc[V],Isc[A],Vmpp [V] and Impp [A]: 10%.Certified in accordance with IEC 61215, IEC 61730-1/2 and UL 1703.
-
CSUN250 -60M
Features
Quality and Certificates
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUNs life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
10-year limited product warranty;
25-year power output warranty.*
Certifications**:
60 High-Efficiency Monocrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Black backsheet or black frame is also available.
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Highest Module Efficiency: 16.02%
12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%
***
Note: All specifications, warranties, certifications about module of CSUN series also apply to that of SST.
Certification Authority
TV Rheinland
Intertek
CEC
FSEC
MCS
Power Range
210W-270W
210W-270W
210W-270W
210W-270W
210W-270W
CGC 255W-305WIEC61215 IEC61730
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
UL1703
IEC61215 UL1703
IEC61215 UL1703
SO LAR
-
Specifications
The electrical data relates to standard test conditions [STC]: 1,000 W/m; AM 1,5; 25C. performance deviation of Pmpp: 3%. performance deviation of Voc[V],Isc[A],Vmpp [V] and Impp [A]: 10%. certified in accordance with IEC 61215, IEC 61730-1/2 and UL 1703.
1000
-0.307%/K
+0.039%/K
-0.423%/K
20
610 pieces monocrystalline solar cells series strings (156mm156mm)
with 6 bypass diodes
length 900 mm, 14 mm2
EVA (Ethylene-Vinyl-Acetate)
composite film
Anodized aluminum profile164099040mm(LWH)
5,400 Pa maximum diameter of 25 mm with impact speed of 23 ms-1
40 C to + 85 C
19.1kg
250-60M
250
37.3
8.78
30.1
8.31
17.44%
15.40%
245-60M
245
37.2
8.69
30.0
8.17
17.09%
15.09%
240-60M
240
37.0
8.62
29.8
8.06
16.74%
14.78%
235-60M
240
37.0
8.62
29.8
8.06
16.39%
14.47%
Type
Operating Condition & Packaging
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm with impact speed of 23m/s (51.2mph)
40 C to + 85 C
Maximum surface load capacity
Hail
Temperature range
IV-Curves
Dimensions
Dimensions(LWH) Container 20 Container40Container20HC Container40HC
300 324 700 756
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
164099040mm
Note:mm(inch)
10(0.39)
9(0.35)
14(0
.55)
35(1.38)
1.8(
0.07
1)
40(1
.58)
1640
(64.
54)
990(38.96)
Junction box
B
A-A
A A
10x10(0.39x0.39)
14x9(0.55x0.35)
Drainage holes4 places
6(0.24)
Mounting slots8 places
Ground holes2 places 86
0(33
.85)
1360
(53.
52)
940(37)
FRONT VIEW BACK VIEW
Electrical typical data
Pmpp [W]
Voc [V]
Isc [A]
Vmpp [V]
Impp [A]
Module efficiency Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating[A]
Cells
Junction boxCableFront glass
Cell encapsulation
Back sheet
Frame
DimensionsMaximum surface load capacity
HailTemperature rangeWeight
Practical module efficiency
white toughened safety glass, 3.2 mm
AA
-
CGC 255W-305WIEC61215 IEC61730
Quality and Certificates
Features
CSUN290-72P
10-year limited product warranty;
25-year power output warranty.*
Certifications**:
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUNs life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
Highest Module Efficiency: 15.24%
72 High-Efficiency Polycrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Black backsheet or black frame is also available.
12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%
***
Note: All specifications, warranties, certifications about module of CSUN series also apply to that of SST.
Certification Authority
TV Rheinland
UL
Intertek
CEC
FSEC
MCS
Power Range
255W-305W
245W-285W
240W-290W
275W-290W
240W-290W
255W-305W
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
UL1703
UL1703
IEC61215 UL1703
IEC61215 UL1703
SO LAR
-
Operating Condition & Packaging
Specifications
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm with impact speed of 23m/s (51.2mph)
40 C to + 85 C
The electrical data relates to standard test conditions [STC]: 1,000 W/m; AM 1,5; 25C. performance deviation of Pmpp: 3%. performance deviation of Voc[V],Isc[A],Vmpp [V] and Impp [A]: 10%. certified in accordance with IEC 61215, IEC 61730-1/2 and UL 1703.
290-72P
290
44.3
8.75
35.6
8.15
16.55%
285-72P
285
44.1
8.67
35.4
8.05
16.27%
280-72P
280
44.0
8.58
35.3
7.94
15.98%
275-72P
275
43.8
8.48
35.2
7.82
15.70%
295-72P
295
44.4
8.83
35.7
8.26
16.84%
14.98% 14.72% 14.46% 14.20%15.24%
1000
-0.292%/K
+0.045%/K
-0.408%/K
20
612 pieces polycrystalline solar cells series strings (156mm156mm)with 6 bypass diodes
length 900 mm, 14 mm 2
white toughened safety glass, 3.2 mm
EVA (Ethylene-Vinyl-Acetate)
composite film
Anodized aluminum profile
195699050mm(LWH)
IV-Curves
Dimensions
Maximum surface load capacity
Hail
Temperature range
Dimensions(LWH) Container 20 Container40Container20HC Container40HC
195699050mm 200 215 480 516
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
10.8(0.43)
9(0.35)
14(0
.55)
35(1.38)
2(0.
078)
50(1
.97)
Junction box
B
B
A-A
A A
8x8(0.31x0.31)
14x9(0.55x0.35)
6(0.24)
Drainage holes4 places
Mounting slots8 places
Ground holes2 places 1
176(
46.2
8)
1676
(65.
96)
Note:mm(inch)
1956
(76.
98)
990(38.96)
FRONT VIEW
940(37)
BACK VIEW
5400 Pa
maximum diameter of 25 mm with impact speed of 23 ms-1
40 C to + 85 C
Electrical typical data
Type
Pmpp [W]
Voc [V]
Isc [A]
Vmpp [V]
Impp [A]
Module efficiency Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating[A]
Cells
Junction box
CableFront glass
Cell encapsulation
Back sheet
Frame
DimensionsMaximum surface load capacity
HailTemperature range
Practical module efficiency
-
Quality and Certificates
Features
CSUN300-72M
10-year limited product warranty;
25-year power output warranty.*
Certifications**:
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd. www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
72 High-Efficiency Monocrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Black backsheet or black frame is also available.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUNs life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
Highest Module Efficiency: 15.75%
12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%Note: All specifications, warranties, certifications about module of CSUN series also apply to that of SST.**
*
CGC 255W-305WIEC61215 IEC61730
Certification Authority
TV Rheinland
Intertek
CEC
FSEC
MCS
Power Range
255W-320W
255W-320W
255W-320W
255W-320W
255W-320W
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
UL1703
IEC61215 UL1703
IEC61215 UL1703
SO LAR
-
Operating Condition & Packaging
Specifications
IV-Curves
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm with impact speed of 23m/s (51.2mph)
40 C to + 85 C
DimensionsNote:mm(inch)
35(1.38)
B
A-A
A A
B
8x8(0.31x0.31)
10.8(0.43)
9(0.35)
1176
(46.
28)
2(0.
078)
14(0
.55)
50(1
.97)
1956
(76.
98)
14x9(0.55x0.35)
6(0.24)
940(37)990(38.96)
Drainage holes4 places
Junction box
Mounting slots8 places
Ground holes2 places
1676
(65.
96)
Maximum surface load capacity
Hail
Temperature range
195699050mm
Dimensions(LWH) Container 20 Container40Container20HC Container40HC
200 215 480 516
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
FRONT VIEW BACK VIEW
Electrical typical data
Type
Pmpp [W]
Voc [V]
Isc [A]
Vmpp [V]
Impp [A]
Practical module efficiency
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating [A]
Cells
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Maximum surface load capacity
Hail
Temperature range
Weight
305-72M
305
44.9
8.87
36.2
8.43
17.73%
15.75%
1000
-0.307%/K
+0.039%/K
-0.423%/K
20
612 pieces monocrystalline solar cells series strings (156mm156mm)
with 6 bypass diodes
length 900 mm, 14 mm2
White toughened safety glass, 3.2 mm
EVA (Ethylene-Vinyl-Acetate)
composite film
Anodized aluminum profile
195699050mm (LWH)
5,400 Pa
maximum diameter of 25 mm with impact speed of 23 ms-1
40 C to + 85 C
23.8kg
300-72M
300
44.8
8.80
36.1
8.32
17.44%
15.49%
295-72M
295
44.6
8.73
35.9
8.22
17.15%
15.23%
290-72M
290
44.5
8.67
35.8
8.11
16.86%
14.98%
285-72M
285
44.4
8.60
35.7
7.99
16.57%
14.72%
The electrical data relates to standard test conditions [STC]: 1,000 W/m; AM 1,5; 25C.Performance deviation of Pmpp: 3%. performance deviation of Voc[V],Isc[A],Vmpp [V] and Impp [A]: 10%.Certified in accordance with IEC 61215, IEC 61730-1/2 and UL 1703.
2.28psar2.28qsar2602.29