CT630HD STANDARD SPECIFICATIONS

CT630HD CHASSISHeat-treated steel, yield strength: 120 000 psi, 760MPa

Frame rail dimensions: 260 x 92 x 9.5mm, section modulus 291cm3

Heavy Duty Intermediate cross member

Huck bolted to minimise maintenance

Tapered end of frame with fifth-wheel mounting angles

Front Underrun Protection Device

Extended inner L-reinforcement

Heavy Duty front frame reinforcement with intergrated tow box

FRONT AXLE

Meritor MFS 14-143A wide track RHD

Type: Forged steel I-beam

Steel Hubs

Capacity: 6,500kg

Option: Alloy Hubs

Option: Meritor-MFS73 Capacity 7,300kg

FRONT SUSPENSIONType: 3 leaf parabolic springs, 1480mm long

Tuned shock absorbers

Capacity: 7,300kg

BRAKESDual Circuit Air System, S-Cam brakes

Size: Front 419mm x 127mm with T24 chamber MFS 14-143A

Size: Rear 419mm x 178mm with type 30/30 chambers

Park brake: Both rear axles, spring-actuated

Haldex auto slack adjusters

Air dryer, Bendix AD-IS

Air Compressor - Bendix BA922 31.6 cfm capacity

Three manual drain valves with pull chains

Dust shield on all axles

Trailer brake hand control on steering column

Semi-trailer air connections at back of cab

Option: Hose tender slide bar, upper rear of cab

Bendix 4-channel ABS with full vehicle wheel control system with automatic traction control

Option: 419mmx152mm with T24 chamber*

STEERINGSheppard M100 power steering gear. Gear-driven power steering pump. Adjustable tilt telescopic steering column with leather-wrapped 2-spoke steering wheel, 457mm diameter

Option: Sheppard M100/HD94 dual steering gears*

WHEELS AND TYRESWheels–Ten: bright finish alloy, 10-stud 285mm PCD, 8.25x22.5

Tyres: 295/80R22.5 on front axle; 1R22.5 on rear axles

Option: Durabright wheels

EXHAUSTDual DPF catalytic muffler system, frame mounted with shroud and dual vertical tail pipes

Passive regeneration

ELECTRICAL SYSTEMLED headlights, with auto on windscreen wiper function and daytime running lights

12-Volt, negative to earth

Diamond Logic multiplexing system

Cat Batteries: 4 x 12V, RHS chassis mounted

Alternator: 12V, 160 amp, brush-type. Pad-mounted

Starter, 105P with Soft Start

Two trailer sockets, 7-pin trailer lighting and an EEC socket for trailer ABS, at rear of cab

Exterior light test system for pre-trip inspection

Circuit breaker with manual reset

Park brake warning horn if brake not applied and door opened Back-up alarm, 102 dba

Cab rear work lights

Option: P.T.O. prep kit (switch and wiring loom)

ENGINECat C15 ACERT ADR 80/03 emissions compliant 6-cylinder, in-line, turbocharged and aftercooled, electronic direct injection with dual DPF Displacement: 15.2-litres

Cruise control with steering wheel controls.

Rated at 550 hp @ 1800 rpm and 1850 lb.ft torque @ 1200 rpm. 2100 governed rpm.

Jacobs engine brake, 3 stage switching

High-capacity under-hood 2 stage air cleaner with restriction indicator gauge

Fuel priming pump

Excellent engine access

100 kph road-speed limited

COOLING SYSTEM

Over-and-under system

Total package: 1545 in2

Horton DriveMaster air operated two-speed fan drive with Nylon fan

CLUTCH

Eaton Fuller Solo Advantage two-plate ceramic with Self Adjust feature

Diameter: 394mm

Light pedal, integrated air-assist clutch release system

TRANSMISSIONEaton Fuller RTLO-20918B 18-speed overdrive

Lube pump & oil-to-water transmission cooler.

Option: Eaton UltraShift Plus Transmission with Hill Start Assist

GVM - 24.5 tonnes GCM - 120 tonnes (higher GCM ratings GVM - 26.0 tonnes* available upon application approval)

CT630HD 56” Sleeper

Chassis Weights (kg) Dimensions (mm) Turning Radius (m)

Suspension Front Rear Total WB BA CA CF AF OAL BBC Curb/Curb Wall/Wall

CT630HD 56” Sleeper PAX460 5080 4130 9210 5400 1290 2423 4023 1600 8290 4267 19.5 20.5

CT630HD 56” Sleeper PAX460 5090 4140 9230 5550 1290 2573 4173 1600 8440 4267 20.1 21.1

CT630HD 56” Sleeper PAX460 5100 4150 9250 5700 1290 2723 4323 1600 8590 4267 20.7 21.7

BBC CF

BA

WB

OAL

AFCA

CT630HD

POS2015_R1

INSTRUMENTATIONElectronic speedometer and tachometerGauges: engine oil pressure, voltmeter, engine oil temperature, air pressure, coolant temperature, fuel level, transmission temperature, rear axle temperatures, fuel trip dataWarning system: low air pressure, low fuel, low oil pressure, high engine coolant temp and low battery voltage (visual and audible)

All efforts have been made to ensure the information contained in this document was correct at time of printing or uploading. Images displayed are for illustration purposes only. Tare weights are provisional figures and have been calculated to provide the best accuracy possible, and may be subject to variation. Navistar Auspac Pty Ltd reserves the right to alter any details of the specifications and equipment without notice. Navistar Auspac Pty Ltd in so far as it is permitted by law to do so, shall not be liable in any way as a result of any reliance placed by any person on anything contained in this brochure. You should therefore check with your authorised Cat Trucks dealer at the time of ordering your truck to ensure that colour, specifications, equipment, design features and options are available for the vehicle you are ordering. Please note that some options may only be available in combination with others. Authorised Cat Truck dealers will on request from Navistar Auspac Pty Ltd provide up to date information on all accessories, design features, prices and availability. CAT058

* With MFS73 Front Axle

www.cattrucks.com.au®2014 Caterpillar All Rights Reserved Printed in Australia CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

REAR AXLEMeritor RT50-160GP

Capacity: 22,700kg (50,000lb)

Ratios: 3.91:1, 4.10:1, 4.30:1 and 4.56:1

Inter-differential power divider lock

Differential cross-lock on rear/rear axle

Steel Hubs

Option: Additional cross-lock on forward rear axle

Option: Lube Pump

Option: Alloy Hubs

REAR SUSPENSION

PRIMAAX EXHendrickson PAX460 suspension with road friendly compliance.

Suspension dump valve with control switch in instrument panel

Capacity 20,900kg (46,000lb)

Inner frame suspension liner

Heavy duty transverse torque rods

DRIVESHAFTMain Shaft – SPL250XL

Interaxle Shaft – SPL170XL

FUEL SYSTEMStandard: 1,220-litres total capacity

Bright finished aluminium 660mm diameter cylindrical tank with alloy steps

Dual Pick-up and return

Fuel cooler, radiator mounted

Option: 1,525-litres total capacity

CABFully Integrated sleeper cab, galvanized steel cab

Base coat, clear coat paint

ECE-R29 compliant

Tilting SMC hood and removeable quarter fenders Bright polished stainless-steel grille surround

Four-point cab mounting system with rear air suspension

Outboard mounted unitized strut type cab suspension provides improved stability and comfort

Drivers Seat: Gramag, hi-back, air suspended, leather trim fitted with adjustable arm rests and integrated seat belt

Passenger Seat: Gramag, hi-back, air suspended, leather trim fitted with adjustable arm rests and integrated seat belt

Full instrument panel with on-board diagnostics display for diagnosis of fault codes in gauge cluster

Overhead console fitted with netting restraints

Premium trim with additional sound insulation

Moulded access handles with 3 point entry and exit

Quarter vent windows

Power windows fitted for both driver and passenger

ACCESSORIESInternal sun visors

Twin windscreen wipers/washers, 2-speed with intermittent action

Electrically adjustable heated mirrors with separate spotter mirrors on both sides

Single air-horn, chassis mounted

Outside temperature in dash display

Luxury hi-rise, full stand-up sleeper cab for maximum driver comfort

Bergstrom Blend Air, dual air conditioning unit offer separate temperature controls for both the driver and sleeper areas

Insulated thermal and noise level reduction curtain, between sleeper and drive compartment.

Deluxe large, inner spring mattress (2040 mm x 900 mm)

Side vent windows with fly screens

Extensive storage capacity through both internal and external access, with external storage boxes

Remote Keyless Entry

Cat Radio CD Player with i-Pod, Bluetooth, MP3. (Double Din)

Option: Reverse camera

Option: Aerodynamic package

Option: Navigation System with B-Double route