CTEK battery chargers

The D250S DUAL charger obtains its energy from DC sources such as alternators, solar panels or wind power and optimises this power to meet the charging requirements of different battery banks. The D250S DUAL automatically selects the best connected DC energy source to achieve high efficiency multi-stage charging.

Solar and Alternator DC/DC Converter chargers

Solar and Alternator DC/DC Converter chargers

Model number D250 TS (56-740) D250S DUAL (56-677) SMARTPASS

Volt 24V 12V 12V DC/DC Only

Charging voltage28.8 V at 25°C, temperature compensated.

Voltage reduced at higher voltage, increased at lower

14.4V at 25°C, temperature compensated 80A

Chargng current10A max 20A N/A

4 step, fully automatic DC/DC charger

Back current drain <1Ah/month

Ripple <4%

Ambient temperature -20°C to +50°C, output power is reduced automatically at high temperatures

Battery types All types of lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)

Battery capacity 20-200 Ah 40–300Ah 28-800Ah

Dimensions 197 x 93 x 49mm (L x W x H) 197 x 93 x 49mm (L x W x H)

Insulation class IP65 IP65

www.rectifier.co.za / www.solar-solutions.co.za / www.currentautomation.co.za

27Watt

18Watt

15Watt

DC-DC converters12 / 24 / 48 / 96 VoltThree NEW models with new features:• Orion 24/12-25: with remote on/off and adjustable output voltage• Orion 24/12-40: with remote on/off• Orion 24/12-70: with remote on/off and adjustable output voltage

Non isolated converters Orion 24/12-5

Orion 24/12-12

Orion 24/12-17

Orion 24/12-25

Orion 24/12-40

Orion 24/12-70

Orion 12/24-8

Orion 12/24-10

Input voltage range (V) 18-35 18-35 18-35 18-35 18-35 18-35 9-18 9-18

Undervoltage shutdown (V) - 14 14 14 14 14 8 8

Undervoltage restart (V) - 18 18 18 18 18 10 10

Output voltage (V) 12 12 12Adjustable

10–15VF set 13,2V

12Adjustable

10–15VF set 13,2V

24Adjustable

20-30VF set 26,4V

Can be connected in parallel no no no yes no yes no yes

Notes: - Other in- or output voltages at request, All natural convection cooled models can also be modified to IP65

Orion 24/12-25 Orion 24/12-40 Orion 24/12-70

Orion

Argo FET Battery IsolatorsSimilarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together.

Argo Diode Battery IsolatorsDiode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

Argo Diode Battery CombinersDiode battery combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control systems. With a diode battery combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.

Cyrix-i 120A/ 225A /425AThe Cyrix-i battery combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a preset voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged).

Cyrix-i Battery Combiner KitThis Battery Combiner Kit is for adding a 2nd or 3rd battery system in your car, boat, RV or whatever you wish. It utilizes the simplest and most advanced technology to keep all your batteries charged using the engine’s electrical system, but isolates the starting battery when charging ceases so you never get stranded.

JHB: Tel: 010 591-1713, Fax: 011 462-0420 KZN: Tel: 031 569-2854, Fax: 031 569-2864 ca@rectifier.co.za

Battery ProtectThe Battery Protect disconnects the battery from non essential loads before it is completely discharged (which could damage the battery) or before it has insufficient power left to crank the engine.

DC-DC Booster Chargers

Features• Ignition protection • Short circuit protection• Overload protection• Over temperature protection

The DC-DC isolated power booster is ideal to regulate and charge batteries in an unstable charging system and to compensate for line loss from long distance charging.

3 Colour LED indication: Green-power on or stand by Yellow-Input Low Red-output overload

• Parallel operation possible• Suitable for battery boost and

charging• Input and output galvanically isolated.• Output voltage adjustable

SBP-12060

Model Input Voltage

OutputVoltage

ContinuousCurrent Efficiency

Ripple&

Noise

LoadRegulation Size (mm) Weight (kg)

PB-1108 8~16 V DC 13.8 V DC 8 A

85~90%

30 mV

30 mV from no load to full load

100 x 115 x 70 mm 0.75

PB-1112 8~16 V DC 13.8 V DC 12 A 140 x 115 x 70 mm 1.0

PB-1120 8~16 V DC 13.8 V DC 20 A 160 x 115 x 70 mm 1.2

PB-1130 8~16 V DC 13.8 V DC 30 A 250 x 115 x 70 mm 1.7

PB-1140 8~16 V DC 13.8 V DC 40 A 270 x 115 x 70 mm 2.1

PB-2205 20~32 V DC 27.6 V DC 5 A

50 mV

100 x 115 x 70 mm 0.75

PB-2210 20~32 V DC 27.6 V DC 10 A 140 x 115 x 70 mm 1.0

PB-2215 20~32 V DC 27.6 V DC 15A 250 x 115 x 70 mm 1.7

PB-2220 20~32 V DC 27.6 V DC 20 A 270 x 115 x 70 mm 2.1

DC-DC Converter Chargers

Model Input Voltage

Output Voltage

Continuous Current Size (mm) Weight

IPC-1205 8~16 V DC 27.6 V DC 5 A 100x115x70mm 0.75

IPC-1210 8~16 V DC 27.6 V DC 10 A 140x155x70mm 1.0

IPC-1215 8~16 V DC 27.6 V DC 15 A 160x115x70mm 1.2

IPC-1220 8~16 V DC 27.6 V DC 20 A 250x115x70mm 1.7

IPC-2110 20~32 V DC 13.8 V DC 10 A 100x115x70mm 0.75

IPC-2120 20~32 V DC 13.8 V DC 20 A 140x115x70mm 1.0

IPC-2130 20~32 V DC 13.8 V DC 30 A 160x115x70mm 1.6

IPC-2140 20~32 V DC 13.8 V DC 40 A 250x115x70mm 1.9

IPC-3110 30~48 V DC 13.8 V DC 10 A 110x115x70mm 0.75

IPC-3120 30~48 V DC 13.8 V DC 20 A 140x115x70mm 1.0

IPC-3130 30~48 V DC 13.8 V DC 30 A 210x115x70mm 1.6

IPC-3140 30~48 V DC 13.8 V DC 40 A 240x115x70mm 1.9

IPC-4110 40~60 V DC 13.8 V DC 10 A 110x115x70mm 0.75

IPC-4120 40~60 V DC 13.8 V DC 20 A 140x115x70mm 1.0

IPC-4130 40~60 V DC 13.8 V DC 30 A 210x115x70mm 1.6

IPC-4140 40~60 V DC 13.8 V DC 40 A 240x115x70 1.9

3-Stage DC-DC ChargersThe smart DC-DC Booster Charger is a microprocessor time controlled three stage charging system, designed to protect your batteries from being over charged. Meaning that your batteries will perform better and last much longer.

Model Input Voltage

Output Voltage

Continuous Current Size (mm)

SDC-1110 10~16 V DC 14.2 V DC 10 A 130x150x70mm

SDC-1120 10~16 V DC 14.2 V DC 20 A 150x150x70mm

SDC-1130 10~16 V DC 14.2 V DC 30 A 180x150x70mm

SDC-1140 10~16 V DC 14.2 V DC 40 A 220x150x70mm

SDC-1150 10~16 V DC 14.2 V DC 50 A 220x150x70mm

SDC-2210 20~32 V DC 28.4 V DC 10 A 150x150x70mm

SDC-2220 20~32 V DC 28.4 V DC 20 A 180x150x70mm

SDC-2225 20~32 V DC 28.4 V DC 25 A 220x150x70mm

Smart Battery ProtectorThe smart battery protector has been designed with overload and short circuit protection capability. It will automatically disconnect a battery if it detects a battery voltage below 10.5 V DC of a 12 V DC battery and restart if the battery voltage is back to normal.

Model Input Voltage

BatteryLow Cut-Off:STD

Continuous Current Size (mm) Weight

(kg)

SBP-12030 10.5~16 V DC 11 V DC ±0.2 V 30 A 120 x 70 x 50 mm 0.4

SBP-12060 10.5~16 V DC 22 V DC ±0.2 V 60 A 150 x 70 x 50 mm 0.6

SBP-24030 21~32 V DC 11 V DC ±0.2 V 30 A 120 x 70 x 50 mm 0.4

SBP-24060 21~32 V DC 22 V DC ±0.2 V 60 A 150 x 70 x 50 mm 0.6

Bloem: Tel: 051 011-0158, Fax: 086 657-9836 CapeTown: Tel: 021 200-5754, Fax: 021 300-1728 ca@rectifier.co.za

These DC-DC converters can be used to run 12V DC from 24V, 36V, or 48V DC battery systems, or 24V DC from a 12V DC battery system. All units are fitted with an overload and short circuit protection. It will automatically switch off the unit and restart to operate if the overload or short circuit is removed.