cu t w o r k bo u q u e t - embroidery online › content › pdf › 12288.pdfsupplies • oesd...
TRANSCRIPT
-
It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2010 OESD, LLC. All rights reserved.
NOTE: Dark red shaded areas denote cutwork. Additional 18 design files included for use with Bernina Cutwork Tool.
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
FB445_48 Butterfly Border3.21 X 6.86 in.
81.53 X 174.24 mm7,922 St. R L
FB450_48 Rose2.83 X 4.27 in.
71.88 X 108.46 mm5,146 St. R
FB455_48 Tulips Corner4.00 X 4.19 in.
101.60 X 106.43 mm7,416 St. R
FB460_48 Flowers & Ribbon
3.79 X 4.89 in.96.27 X 124.21 mm
9,598 St. R
FB446_48 Butterfly Corner4.72 X 4.71 in.
119.89 X 119.63 mm11,289 St. R
FB451_48 Roses5.18 X 5.90 in.
131.57 X 149.86 mm20,913 St. R L
FB456_48 Flowers Centerpiece
4.82 X 2.56 in.122.43 X 65.02 mm
6,486 St. R
FB461_48 Ribbon4.79 X 4.79 in.
121.67 X 121.67 mm7,814 St. R
FB447_48 Butterfly & Flowers
3.12 X 3.01 in.79.25 X 76.45 mm
5,185 St. R
FB452_48 Rose Circle3.69 X 3.44 in.
93.73 X 87.38 mm9,440 St. R
FB457_48 Flowers Accent4.24 X 3.29 in.
107.70 X 83.57 mm4,621 St. R
FB462_48 Daisies Medallion
5.04 X 5.01 in.128.02 X 127.25 mm
18,518 St. R L
FB448_48 Butterfliy Centerpiece
2.98 X 6.06 in.75.69 X 153.92 mm
9,837 St. R L
FB453_48 Tulip2.16 X 5.35 in.
54.86 X 135.89 mm6,852 St. R L
FB458_48 Flowers & Ribbon Border2.69 X 4.65 in.
68.33 X 118.11 mm7,344 St. R
FB463_48 Mini Blossom1.54 X .48 in.
39.12 X 12.19 mm580 St. R S
FB449_48 Roses & Butterfly
4.52 X 6.23 in.114.81 X 158.24 mm
18,151 St. R L
FB454_48 Tulips4.27 X 5.44 in.
108.46 X 138.18 mm8,216 St. R L
FB459_48 Flower & Ribbon Corner4.70 X 4.15 in.
119.38 X 105.41 mm6,485 St. R
FB464_48 Jumbo Daisy Wreath
9.53 X 9.53 in.242.06 X 242.06 mm
42,821 St. R L
Cutwork BouquetPack 12288 • 20 Designs
-
It is a violation of Copyright law to make and distribute copies of software or artwork.Software is licensed to the original purchaser for use at one location. ©2010 OESD, LLC. All rights reserved.
Listings below indicate cutowrk information, color sample, stitching order and suggested thread color number in Isacord, YLI Fine Metallic, Yenmet or YLI Variegated threads.
NOTE: CWC denotes designs to be used with the Bernina Cutwork Tool.
FB445_48 Butterfly Bordern 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB445_48_CWC Butterfly Border (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB446_48 Butterfly Cornern 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB446_48_CWC Butterfly Corner (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB447_48 Butterfly & Flowersn 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB447_48_CWC Butterfly & Flowers (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB448_48 Butterfly Centerpiecen 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB448_48_CWC Butterfly Centerpiece (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB449_48 Roses & Butterflyn 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB449_48_CWC Roses & Butterfly (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB450_48 Rosen 1. Single Color Design ............... 1172
FB451_48 Rosesn 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB451_48_CWC Roses (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB452_48 Rose Circlen 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB452_48_CWC Rose Circle (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB453_48 Tulipn 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB453_48_CWC Tulip (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB454_48 Tulipsn 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB454_48_CWC Tulips (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB455_48 Tulips Cornern 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB455_48_CWC Tulips Corner (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB456_48 Flowers Centerpiecen 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB456_48_CWC Flowers Centerpiece (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB457_48 Flowers Accentn 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB457_48_CWC Flowers Accent (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB458_48 Flowers & Ribbon Bordern 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB458_48_CWC Flowers & Ribbon Border (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB459_48 Flower & Ribbon Cornern 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB459_48_CWC Flower & Ribbon Corner (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB460_48 Flowers & Ribbonn 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB460_48_CWC Flowers & Ribbon (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB461_48 Ribbonn 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB461_48_CWC Ribbon (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB462_48 Daisies Medallionn 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
Cutwork BouquetPack 12288 • 20 Designs
-
It is a violation of Copyright law to make and distribute copies of software or artwork.Software is licensed to the original purchaser for use at one location. ©2010 OESD, LLC. All rights reserved.
Listings below indicate cutowrk information, color sample, stitching order and suggested thread color number in Isacord, YLI Fine Metallic, Yenmet or YLI Variegated threads.
Designs shown are for instruction only.
INSTRUCTIONS:Lightly spray the top of a hoop sized piece of OESD •Badgemaster or AquaMesh Stabilizer with 505 Temporary Adhesive Spray.Place the sprayed stabilizer onto the wrong side of the fabric in •the design area and hoop.Place the hoop on the machine and begin stitching the design.•AFTER the “cutwork guide stitch” has been stitched, remove •the hoop from the machine. DO NOT remove the fabric from the hoop. PICTURE 1 Use the sharp point of an Embroidery Wand to gently pull •the fabric apart from the stabilizer. Any enclosed area that is created by the first color of the design can be trimmed away to create the open work. PICTURE 2 Use a small sharp pair of scissors to clip away ONLY the •fabric inside the guide stitches. Leave the stabilizer intact. Place the hoop on the machine again and continue stitching the •remainder of the embroidery design.
SUPPLIES:Fabric•Anyfirmlywovenhighqualityfabric.•Thread•Isacord Polyester Embroidery Thread•Stabilizer•OESDBadgemasterorOESDAquaMeshStabilizer•Optional Notions•Embroiders’ Wand•505 Temporary Adhesive Spray•
Basic Cutwork Instructions
NOTE: CWC denotes designs to be used with the Bernina Cutwork Tool
FB462_48_CWC Daisies Medallion (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
FB463_48 Mini Blossomn 1. Single Color Design ............... 1172
FB464_48 Jumbo Daisy Wreathn 1. Cutwork Lines ........................ 1172n 2. Lace & Cover Stitches ............ 1172
FB464_48_CWC Jumbo Daisy Wreath (for use with Bernina CutWork Tool)n 1. Cutwork Lines ........................ 0020n 2. Cut 1 ....................................... 0000n 3. Cut 2 ....................................... 0000n 4. Cut 3 ....................................... 0000n 5. Cut 4 ....................................... 0000n 6. Lace & Cover Stitches ............ 1172
Cutwork BouquetPack 12288 • 20 Designs
Photo 1
Photo 2
-
SUPPLIES• OESD AquaMesh Water Soluble Stabilizer• OESD AquaMesh Plus Water Soluble Stabilizer• 101 Temporary Spray Adhesive• Isacord Polyester Embroidery Thread• Bernina® CutWork Tool• Embroidery foot #44 or #15
PREPARE FABRIC• Starch fabric 2-3 times following manufacturer’s instruc-
tions.• Fabric to be cut should be crisp.• Spray one hoop sized piece of AquaMesh Stabilizer and
adhere it to the wrong side of your fabric.• Hoop stabilizer and fabric.
EMBROIDER AND CUT• Send desired design to the embroidery machine (designs
enhanced to work with the CutWork tool will end in CWC).• Replace normal stitch plate with the CutWork stitch plate.• Attach the hoop to the machine.• Stitch the design as normal until the machine shows Cut. PHOTO 1• When the machine calls for cut 1, 2, 3 or 4 you must replace
embroidery foot with foot #44 and replace your embroidery needle with the CutWork tool (If you do not have foot #44 you can leave foot #15 on the machine). PHOTO 02
• Unthread the machine.• Follow the "thread changes" on your machine screen and
turn the dial on the CutWork tool as required.• After cuts are complete, remove hoop from machine but do
not remove the fabric from the hoop.• Gently remove any cut fabric piece, trimming any thread
that may have not been cut completely.• Apply a piece of AquaMesh Plus Stablizer over the cut
pieces on the backside of the hoop, making sure to com-pletely cover cut areas. PHOTO 03
• When the machine calls for threads again replace the needle and foot, rethread the machine and stitch as normal.
• Repeat as required, until design is completed. PHOTO 04• Remove hoop from machine and fabric and stabilizer from
hoop.• Carefully cut away excess stabilizer.• Follow instructions printed on stabilizer packaging to re-
move remaining stabilizer.
Using the Bernina® CutWork Tool
Photo 2
Photo 1
Photo 4
Photo 3