Curved Self-Supporting Roofingwww.incoperfil.com

Inner profile. Free-standing covering element, any of the following products could be used- INCO 44.4, INCO 44.6, INCO 70.4-.

Insulation. Lay out in a continuous length over the roof, usually consisting of rock wool felt.

Spacer System. Metal framing consist of omega shaped profile, to form a double skin roof.

Outter profile*. Upper corrugated sheet which may or may not be free-standing. *In case of using skylights, please contact our Technical-Commercial department.

Support beams and tension bar*. Structural elements that receive the reactions generated by the roofing. *Horizontal tension bars for spans larger than 7 m.

In collaboration with the Valencia Polytechnic University Department of Continuum Mechanics and Structural Theory of the School of Industrial Engineering, Ingeniería y Construcción del Perfil S.A., has calculated the effective characteristics of the INCO 44.4, INCO 44.6, INCO 70.4 Curved profiles.

Numerous tests have been carried out on several spans and thincknesses, based on the EUROCODE-3, to validate theoretical results.

Ingeniería y Construcción del Perfil S.A. technical team will provide you a personalized calculation report will and further guidance on the structure modelling and calculation.

Request a CALCULATION

REPORT for your roofing and structure design. Scan this QR.

Ingeniería y Construccción del Perfil S.A. has developed the Self-Supporting Curved

Roofing system, where the curved profile is able to support the loads and transmit them to the supports without intermediate structure.

Self-Supporting Curved System allows covering a wide span (up to 13 meters) with only a single piece.

This system is broad in scope: sports facilities, agricultural buildings, industrial premises, warehouses, parking and logistics Centre.

1. Inner profile2. Insulation3. Spacer System4. Outter profile5. Support beams / Tension bar

1.

2.

3.

4.

5.

5.

Reduced weight of the structure in comparison with the traditional system.

Execution Speed, rapid assembly as it is a prefabricated system.

Improving Aesthetics, innovative image far away from industrial typologies.

High Durability, guarantee up to 25 years in the cover material.

Efficient transport, parts dimensions allow the use of a traditional transport.

Versatility, allows the use of metal or concrete structure.

CURVED ROOFING

SYSTEM DESCRIPTION

COMPONENTS

CALCULATIONS AND TESTS

ADVANTAGES

max. 7,00 m

max. 7,00 m

max. 13,30 m

PRODUCTS

INCO 44.4 / 44.6 Curved

INCO 70.4 Curved

INCO 44.4 Curved

Self-supporting curved roof. Spans up to 7 meters. Base Material Quality S250GD / Galvanized / Pre-lacquered / PVDF/HDX, etc.Perforated for Acoustic Applications, Arched Skylights, etc.Thickness 0.6 - 1.0 mm.

INCO 44.6 Curved

Self-supporting curved roof. Spans up to 7 meters. Base Material Quality S250GD / Galvanized / Pre-lacquered / PVDF/HDX, etc.Perforated for Acoustic Applications, Arched Skylights, etc.Thickness 0.6 - 1.0 mm.

INCO 70.4 Curved

Self-supporting curved roof. Spans up to 13,30 meters. Base Material Quality S250GD / Galvanized / Pre-lacquered / PVDF/HDX, etc.Perforated for Acoustic Applications, Arched Skylights, etc.Thickness 0.6 - 1.0 mm.

Patented Product 502356 (4)

values in mm

Patented Product 502356 (4)

values in mm

values in mm

980

24

177 6568

245

44

155

44

930

R40

840210

100110

70

50

300

200

100

04 5 6 7

Span (m)

a = 1,0 mm

c = 0,7 mm

abc

b = 0,8 mm

a = 1,0 mm

c = 0,7 mm

abc

b = 0,8 mm

a = 1,2 mm

c = 0,8 mmab

c

b = 1,0 mm

300

200

100

04 5 6 7

Span (m)

Span (m)

600

400

200

08 9 10 11 12 13

INSTALLATION

- Place the inner self-supporting profile with the spacer trim RCUR-01.01 simultaneously.

- Install the spacer system (omega shaped profiles) over the inner self-supporting profile.

- Place the insulation, usually consisting of rock wool felt, to form a double skin roof.

- Fixation of the outter profile on the spacer system.

INCO 44.4 / 44.6 Curved

INCO 70.4 Curved

ASSEMBLY

ASSEMBLY

Intermediate Beam End Beam

Intermediate Beam End Beam

The Self-Supporting Profiles could be installed in metal and concrete structures.*Please contact with the structure and fixation manufacturer.

- Place the inner self-supporting profile and its fixation to the structure.

- Install the spacer system over the inner self-supporting profile.

- Place the insulation, usually consisting of rock wool felt, to form a double skin roof.

- Fixation of the outter profile on the spacer system.

The Self-Supporting Profiles could be installed in metal and concrete structures.*Please contact with the structure and fixation manufacturer.

1. Inner Self-Supporting Profile2. Spacer Trim RCUR-01.01 3. Spacer System4. Insulation5. Outter profile6. Valley gutter

FIXATION

Sheet - SheetSelf-tapping Screw / Cast Steel

Sheet- Concrete Structure*Concrete Screw Anchor / Cast Steel

FIXATION

Sheet - SheetSelf-tapping Screw / Cast Steel

Sheet- Metal Structure*Self-tapping Screw / Cast Steel

1. Inner Self-Supporting Profile2. Spacer System3. Insulation4. Outter profile5. Valley gutter

4.

1.

5.

2.

2.

5.

3.

1.

4.

6.

25º

25º

3.

PROJECTS

INCO 44.4 / 44.6 Curved

INCO 70.4 Curved

Highway V-31VALENCIA

s.5

s.7

Highway V-31ALICANTE

Beniparrell

Alcasser

Albal

Silla

Ingeniería y Construcción del Perfil S.A. Carrer Nou, nº 16-27 | Pol. Industrial Mas del Polio | 46469 Beniparrell | Valencia | T +34 961 211 778 F +34 961 211 504 | info@incoperfil.com | www.incoperfil.com | Ingeniería y Construcción del Perfil S.A. All rights reserved.

INC

O 7

0.4

Cu

rve

d |

Ro

of

| S

po

rts

Ce

nte

r |

Jaé

n