CURRICULUM VITAEName: Mohamed Galal Mohamed KhalilMobile: +2-01069393921 & +966-549846522Email: Mgalalqc@Gmail.com

Career ObjectivesI'm active engineer who develops his skills every time, I have a good knowledge and experience in welding, fabrication and Inspection of new and in-service piping, vessels and tanks. I’m familiar with codes and Standards (ASME, ASTM, API, AWS, EN, and ISO), also I’m familiar with safety programs. I’m awareness by learning the new techniques which help me in work and I’m seeking for a job at a place where I can learn new things every day. I can work under pressure, work in team, lead group and learn anything in low time.

Education1. BSc of Mechanical Engineering (Production Section) 2009 - Al-Azhar University - Good

degree.2. AWS-CWI Certified Welding Inspector (certificate no: 12072261).3. API 570 Authorized Piping Inspector (certificate no: 47370).4. API 510 Authorized Pressure Vessel Inspector (certificate no: 51415).5. ASNT NDT Level II in MT, PT, RT, UT and VT.6. PAUT Level II.7. TOFD Level II.Notes:1. I’m going to attend API 653 Above Ground Storage Tanks Inspector at November 2015.2. I’m going to attend ASNT NDT Level III exam in MT, UT at April 2016.

Graduation ProjectMy graduation Project was in Ergonomics (Ergonomics looks at what kind of work you do, what tools you use and your whole job environment. The aim is to find the best fit between you and your job conditions) this subject is related to job design and safe work shop designing.Degree: Excellent.

Skills

1- Conducting many Welding & NDT Courses for students and Engineers.2- The ability to do the following:o Preparing the Quotations.o Preparing and developing of ITPo Preparing and developing of API Inspection procedures.o Preparing and developing of NDT procedures. o Performing visual inspection, On-stream inspection and internal inspection in accordance with API 570, API 510 and API 653.o Calculating the corrosion rate, Inspection intervals and the remaining life in accordance with API 570 & API 510.o Calculating the maximum allowable working pressure.o Review the procedures.o Complete piping inspection checklists.o Identify all possible dead legs & small bore piping on drawings.o Identify all soil/air interface and coating damage.o Complete piping inspection template and submit to company with photos of all findings

Page 1 of 7

o Choosing TML Points.o Choosing Profile radiograph points.o NDE (Non Destructive Examination MT, PT, RT & UT).o Automatic Ultrasonic Testing (Phased Array) PAUT.o Time of Flight Diffraction (TOFD).o Issuing a report of plant status. o Review the design. o Review the drawing. o Review Materials certificates.o Review PQR.o Review WPS. o Inspection of Fit up.o Supervising of Welding Process.o Inspection of Tightening.o Dimensional Inspection.o Inspection of heat treatment.o Inspection of Hydro Test.o Inspection of sand blasting.o Inspection of Painting. o NDE Inspector in ASME review for MEGA, Al-Basmalah Contracting, PSC, DSD and PSP companies.

3- Professional in using Automatic Level instrument4- Familiar with codes and Standards (ASME, ASTM, API, AWS, EN, ISO).5- Familiar with safety programs.

Experiences

1- From 12/10/2014 until now:Company: DAR Group Job: Welding Engineer

Work scope: o Inspection of welding, erection, painting and insulation of piping, pipelines ,storage tanks and steel structure.

Duties:o Review the design. o Review the drawing. o Reviewing and approval of Materials certificates. o Reviewing and approval of erection procedures.o Reviewing and approval of PQR.o Reviewing and approval of WPS. o Reviewing and approval of NDT procedures. o Choosing the suitable NDE Method (MT, PT, RT, UT, PAUT, TOFD and CR).o Inspection of Fit up.o Supervising of Welding Process.o Inspection of Tightening.o Dimensional Inspection.o Inspection of heat treatment.o Inspection of Hydro Test.o Inspection of sand blasting.o Inspection of Painting. o Conducting Welding & Welding Inspection training for the client.

Projects:o Madinah Haji Project

Page 2 of 7

2- From 01/05/2013 until 30/9/2014:Company: NYCO joint venture with ExxonMobil Co.Job: Inspection Engineer

Work scope: o In-service inspection of Degassing stations

Duties:o Preparing and developing of ITPo Preparing and developing of API Inspection procedures. o Preparing and developing of NDT procedures.o Performing visual inspection, On-stream inspection and internal inspection in accordance with API 570, API 510 and API 653.o Calculating the corrosion rate, Inspection intervals and the remaining life in accordance with API 570 & API 510.o Calculating the maximum allowable working pressure.o Review the procedures.o Complete piping inspection checklists.o Identify all possible dead legs & small bore piping on drawings.o Identify all soil/air interface and coating damage.o Complete piping inspection template and submit to company with photos of all findingso Choosing TML Points.o Choosing Profile radiograph points.o Choosing the suitable NDE Method (MT, PT, RT, UT, PAUT, TOFD and CR).o Issuing a report of plant status. o Review the design. o Review the drawing. o Review Materials certificates.o Review PQR.o Review WPS. o Inspection of Fit up.o Supervising of Welding Process.o Inspection of Tightening.o Dimensional Inspection.o Inspection of heat treatment.o Inspection of Hydro Test.o Inspection of sand blasting.o Inspection of Painting.

Projects:o In-service Inspection of WEST QURNA I Oil Fields (Basra, Iraq).

3- From 24/04/2012 until 30/4/2013 :Company: Cairo Inspection Company (CIC) Job: QC Head & Instructor.

Work scope: o Inspection of Pressure Vessel, Oil Tanks, Piping, Pipelines and Steel Structure.o Conducting many Welding & NDT Courses for students and Engineers.

Duties:o Preparing the Quotations.o Conducting Welding Inspection Training Courses. o Preparing and developing of ITPo Preparing and developing of API Inspection procedures.

Page 3 of 7

o Preparing and developing of NDT procedures.o Performing visual inspection, On-stream inspection and internal inspection in accordance with API 570, API 510 and API 653.o Calculating the corrosion rate, Inspection intervals and the remaining life in accordance with API 570 & API 510.o Calculating the maximum allowable working pressure.o Review the procedures.o Complete piping inspection checklists.o Identify all possible dead legs & small bore piping on drawings.o Identify all soil/air interface and coating damage.o Complete piping inspection template and submit to company with photos of all findingso Choosing TML Points.o Choosing Profile radiograph points.o NDE (Non Destructive Examination MT, PT, RT & UT).o Automatic Ultrasonic Testing (Phased Array) PAUT.o Time of Flight Diffraction (TOFD).o Issuing a report of plant status. o Review the design. o Review the drawing. o Review Materials certificates.o Review PQR.o Review WPS. o Inspection of Fit up.o Supervising of Welding Process.o Inspection of Tightening.o Dimensional Inspection.o Inspection of heat treatment.o Inspection of Hydro Test.o Inspection of sand blasting.o Inspection of Painting. o NDE Inspector in ASME review for MEGA, Al-Basmalah Contracting, PSC, DSD and PSP companies.

Projects:o In-service Inspection of Volcanica Company EGYPT.o In-service Inspection of Haliburton Company EGYPT.o In-service Inspection of Schlumberger Company EGYPT.o In-service Inspection of WEST DIKIRNIS LPG Plant South Patra (Melrose Petroleum EL-Mansoura Co) EGYPT.o WEST DIKIRNIS REFRIGERATION-PHASES 1, 2&3. (Melrose Petroleum EL- Mansoura Co) EGYPT.o HADIDA Balilaa Transit Pipeline Fast Track Project (SPPC & Petro energy Co) ( SUDAN).o Miraco Carrier Vessel (Petrojet)o GHABBOUR GROUP (NEW EXHIBITAION & MAINTENANCE WORKSHOP) (ASF) EGYPT.o CREDIT AGRICOLE EGYPT HEAD OFFICE (Orascom) EGYPT. o North Giza Power station (PSC) EGYPT.o Inspection of Drilling Pipes (Hebei Yaoshoeng Petroleum Special pipes co) CHINA.o Alteration of Vertical Filter/Separator (Petrobel) Egypt.o QPC Power station (ENNPI/QARUN) EGYPT.

4- From 31/07/2010 until 29/02/2012:Company: Madinah Turkish Company for Contracting and Maintenance (MTC) Job: QC EngineerWork scope: Inspection of Oil Tanks, Steel frames, Piping, Shading Area.

Page 4 of 7

Duties:o Review Materials certificates.o Review PQR.o Review WPS. o Review the drawing.o Inspection of Fit up.o Supervising of Welding Process.o Inspection of Tightening.o Dimensional Inspection.o Visual Inspection of the welding. o Non Destructive Testing for Joints (MT, PT, RT & UT).o Inspection of heat treatment.o Inspection of Hydro Test.o Inspection of sand blasting.o Inspection of Painting.

Projects:o General Class rooms male (B16c) in Taibah University.o Housing of Air Forces King Abdu AL-Aziz Air Base.

5- From 01/09/2010 until 29/02/2012 (Part Time):Company: Attiah Thobity & Bross Co for Contracting (ATC) Job: Planning EngineerWork scope: Preparing and Updating the Project Time ScheduleDuties:

o Preparing the Project Time Scheduleo Updating the Project Time Scheduleo Submitting weekly and monthly report to the consultant and top management

Project:o General Class rooms male (B16c) in Taibah University.

6- From 10 /10/2009 until 15/07/2010:Company: Quality Engineering Group (QEG) Egypt.Job: QC EngineerWork scope: Inspection of Oil Tanks, Steel Structure Building, Kilns, Piping, Shading Area.

Duties:o Review Materials certificates.o Review PQR.o Review WPS. o Review the drawing.o Inspection of Fit up.o Supervising of Welding Process.o Inspection of Tightening.o Dimensional Inspection.o Visual Inspection of the welding. o Non Destructive Testing for Joints ( MT,PT,RT & UT).o Inspection of heat treatment.o Inspection of Hydro Test.o Inspection of sand blasting.o Inspection of Painting.

Projects:

Page 5 of 7

o GOE Cement Project (The project is construction of cement factory).o Sidi-Krir power stations (Toshiba).o Steel tanks in Arab contractors work shop (Tamouh).o Susan Mubarak Museum.o Al-Amieria Drainge station.

7- From graduation until 08 /10 /2009:Company: Industrial Projects Company (INPEC) Egypt.Job: Workshop Production EngineerWork scope: fabrication of steel projects (Steel Structure Buildings, Steel Beams, Steel Girders, Steel Stairs, Pylons, Pipelines, heat exchangers.Duties:

o Review Drawings.o Preparing the daily production plan.o Review Materials certificates.o Review the drawing.o Supervise the Cutting Process.o Supervise the Fit up process.o Supervise the welding process.o Supervise the Sand blasting process.o Supervise the Painting process.

Projects:o New air traffic control tower in Cairo International Airporto Orascomo Abu Qir Thermal Power Plant units 6&7o West delta electricity Production Companyo El Katamiya Highland International Clubo CMSo El-Atf power stations (Toshiba)o Sidi-Krir power stations (Toshiba)o Middle delta electricity Production Companyo Delta Steel Mill (Furnaces, Tanks, Elbows…etc.) o Sphinx, El-Borg & NPC office buildings.o Smart Village.

Trainings1- API 570 Course (API Authorized Piping Inspector Training Course) from 08/09/2012 to

19/09/2012.2- CWI Certified Welding Inspector (Training Course) from 07/04/2012 to 25/04/2012.3- Primavera Training Course from 05/03/2012 to 29/03/2012.4- Auto CAD 2D Course from 02/08/2008 to 28/08/2008.5- Training in GCF (Great Cairo Foundries) which works in field of production of Valves,

Pipes and Fittings from 19/07/2008 to 24/08/2008.6- Training in Gasco from 29/06/2008 to 17/07/2008 (Training course in Pipelines welding

and inspection).7- Training in EMC (Egyptian Maintenance Company) from 29/07/2007 to 12/08/2007

(Training course in Pipelines inspection).8- Training course in Non-Destructive Testing within the recommendation of the American

Society of Non Destructive Testing ASNT in the following:

o Liquid penetration testing PT (SNT TC 1A) Level II.o Magnetic Particle testing MT (SNT TC 1A) Level II.o Radiographic testing RT (SNT TC 1A) Level II.o Ultrasonic Testing UT (SNT TC 1A) Level II.o AUT Phased Array (SNT TC 1A) Level II.

Page 6 of 7

o Visual Inspection Testing VT (SNT TC 1A) Level II.

Languages

Arabic: Mother tongue.English: Fluent.

Computer skills1- Professional in using:o Windows (Win 8, Win 7, Vista, XP Sp2, 2000, ME, and 98).o Auto CAD 2D.o Internet.o Office 2010, Office 2007, Office 2003.

2- Good in using: o Microsoft Project.o Primavera Project Planner P6 & P3.

3- High speed in Typing. 4- Good in maintenance of Soft and Hard Ware.

Personal data

Gender: Male. Date of Birth: 11/12/1986Address: 17 El-Maamoon St, El-Mehta St, Giza, Egypt.Religion: Muslim.Marital status: Engaged. Nationality: Egyptian. Wiling to relocate: YesMilitary state: Exempted.Driving license: Valid.

All references will be valid upon required Thanks for interest

Page 7 of 7