dairy equipment product guide - mgm companymgmcompany.com › catalog ›...

DAIRY EQUIPMENTPRODUCT GUIDE

MANUFACTURES — DISTRIBUTORS —DIRECT FACTORY AGENTSWWW.MGMCOMPANY.COM

WISCONSIN—FLORDIA—-UNITED KINGDON

2013

2

MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]

2

MGM Company, Inc. WWW.MGMCOMPANY.COM

TABLE OF CONTENTS

MILK LINE & ACCESSORIESCLAMPS 4FERRULES 5, 6END CAPS 7ELBOWS, 45’s, U BENDS 8, 9TEE’S & Y’S 10REDUCERS & ADAPTERS 11, 12, 13HEX NUTS 13Y-BALL CHECK VALVES 14, 15AIR BLOW VALVES 14, 15BUTTERFLY VALVES 16IN LINE BALL CHECK VALVE 11, 14GASKETS & SCREENS 17, 18PIPELINE HANGERS 19MILK INLETS & VALVES 20CLAWS & SHELL / AIR FORKS 21SHUT OFFS 21

RECEIVERSRECEIVERS 22, 26MOISTURE TRAPS 24TRAP BENDS 24FLOAT BALLS 24MILK PUMPS 25ACRYLIC COVERS 25LIQUID LEVEL CONTROL 26

MILK FILTRATIONFILTER FRAMES 27, 28DISPENSERS 55

VACUUM LINEPVC TANKS & PRE-AIR FILTERS 30 — 35PLASTIC GATE VALVES 36, 37PVC PIPE 38PVC FITTINGS 39 — 44DRAINS & CHECK VALVES 45PULSATORS 46STALL COCKS 46

WASHINGWASH TANKS 47DRAIN BASKETS 48NO HUB COUPLINGS 48DISTRIBUTION TEES 49BENDER WASHING EQUIPOMENT 50 — 53

LIVESTOCK CARE & MILKHOUSELEG BANDS 54SPRAYERS 54TOWELS & DISPENSERS 55FREISH COW BUCKETS 21

3


3


We offer a complete line of 3A approved stainless steel fittings, clamps and gaskets. Listed are only those commonlyused in the dairy industry. All of the fittings listed are Type 304 Stainless and are Polished ID/OD.

Type 316 Fittings are available upon request.

304 STAINLESS STEEL CLAMPS AND FITTINGS

ISO 9001 Certified Factory

4


4


Part No. Tube Size A152915 1.0” & 1.5” 2.080152920 2.0” 2.610152925 2.5” 3.140152930 3.0” 3.670152940 4.0” 4.780

Part No. Tube Size A

152115 1.0” & 1.5” 2.122152120 2.0” 2.654152125 2.5” 3.185152130 3.0” 3.717152140 4.0” 4.820152160 6.0” 6.695152161 Wing Nut w/hole

152105 .50” & .75” 1.062

304 STAINLESS STEEL CLAMPS

Heavy Duty Clamp Single Pin13MHHM

Part No. Tube Size A152710 1.0” & 1.5” 2.122152712 2.0” 2.654152716 2.5” 3.185152713 3.0” 3.717152714 4.0” 4.820

V Insert Clamp 13WGCDairy Clamp (Thumb Screw)

Adjustable Toggle Clamp13MHLA

Part No. SAE Size Min Max Min Max

150000 6 .44 .78 11 20

150003 12 .69 1.25 18 32

150007 28 1.31 2.25 33 57

Part No. SAE Size Min Max Min Max

150019 88 5.06 6.00 129 152

150022 116 6.50 7.75 165 197

152955 128SS 5.69 8.50 144 216

150025 152 7.19 10.00 182 254

150027 176 8.69 11.50 225 292

150029 200 10.19 13.00 259 330

150033 248 13.19 16.00 335 406

150015 60 3.31 4.25 84 108

150014 56 3.06 4.00 78 102

150013 52 2.81 3.75 71 95

150008 32 1.56 2.50 40 64

150009 36 1.81 2.75 46 70

150012 48 2.56 3.50 65 89

Series 300 Marine Grade Gold Seal1/2” wide worm gear clamps areconstructed of all stainless steel.The all stainless steel 300 clampprovides for better corrosion resis-tance when used in applicationswhere there are high concentra-tions of chlorides. This featuremakes it an ideal fit in the dairyindustry. Clamps are available inboxes of 10 or bulk stock. Boxes of10 are ideal for distribution todealers with service and installa-tion trucks.

Stainless Steel Band Clamps.

5


5


Part No. Tube Size

152220 2.0”152225 2.5”152230 3.0”152240 4.0”

152215 1.5”

A

1.1251.1251.1251.1251.125

B

1.3701.8702.3702.8703.834

C

1.502.002.503.004.00

152210 1.0” 1.125 .8760 1.00

152415 1.5”152420 2.0”152425 2.5”152430 3.0”152440 4.0”

Part No. Tube Size A B

.500 1.370

.500 1.870

.500 2.370

.500 2.870

.625 3.834

152410 1.0” .500 .8700C

1.001.502.002.503.004.00

Long Butt Weld Ferrule L14AM

Short Weld Ferrule 14WMPS

Roll on Ferrule 14RMP

Part No. Tube Size A B152310 1.0” .7500 1.005152315 1.5” 1.125 1.505152320 2.0” 1.312 2.005152325 2.5” 1.375 2.505152330 3.0” 1.437 3.005152340 4.0” 1.500 4.005

Tank Welding Ferrule Light14WLMP

Part No. Tube Size A B C152450 1.5” 3.00 1.370 1.50152451 2.0” 3.00 1.870 2.00152452 2.5” 3.00 2.370 2.50152453 3.0” 4.00 2.870 3.00152454 4.0” 4.00 3.834 4.00

Ferrule Short Threaded 15TFRS

Part No. Tube Size A B154050 1.0” .718 .870154051 1.5” .718 1.370154052 2.0” .750 1.870154053 2.5” .875 2.700154054 3.0” .906 2.870154055 4.0” 1.031 3.834

304 STAINLESS STEEL FERRULES

6


6


304 STAINLESS STEEL FERRULES

Part No. Tube Size A B154000 1.0” 1.375 .870154001 1.5” 1.500 1.370154002 2.0” 1.500 1.870154003 2.5” 1.750 2.370154004 3.0” 1.750 2.870154005 4.0” 1.750 3.834


Part No. Tube Size A B154020 1.0” .718 .870154021 1.5” .718 1.370154022 2.0” .750 1.870154023 2.5” .875 2.370154024 3.0” .906 2.870154025 4.0” 1.031 3.834

Part No. Tube Size A B154030 1.0” 1.375 .870154031 1.5” 1.500 1.370154032 2.0” 1.500 1.870154033 2.5” 1.750 2.370154034 3.0” 1.750 2.870154035 4.0” 1.750 3.834

Ferrule Long Threaded 15A

Ferrule Threaded Roll-On 15R

Ferrule Short Plain 14PRFS

Ferrule Long Plain L14A

Ferrule Roll-On Plain 14R


7


7


ECCENTRIC NIPPLED END CAPS

End cap 1.5” 2” 2.5” 3”

INLET O.D.

5/8” 152654E 152659E 152623E 152633E

3/4” 152653E 152622E NA 152662E

7/8” 152655E 152661E NA NA

1” 152651 152621E NA NA

CONCENTRIC NIPPLED END CAPS

End cap 1.5” 2” 2.5” 3”

INLET O.D.

5/8” 152654 152659 152623 152663

3/4” 152653 152622 NA 152662

7/8” 152655 152661 NA NA

1” 152652 152621 NA NA

CONCENTRIC

ECCENTRIC

Stainless Steel Bevel Seat Solid EndCap 16A.

White Poly Bevel Seat End Caps.

Part No. Tube Size A154081 1.0” 1.312154082 1.5” 1.843154083 2.0” 2.375154084 2.5” 2.906154085 3.0” 3.437154086 4.0” 4.500

Stainless Steel Clamp Solid EndCap 16AMP

A B

.250 2.516

.250 3.047

.250 3.579

.312 4.682

Tube Size

2.0”2.5”3.0”4.0”

Part No.

152620152625152630152640

152615 1.0” & 1.5” .250 1.984

Part No. Tube Size A192001 1.5” 1.843192002 2.0” 2.375192003 3.0” 3.437

304 STAINLESS STEEL END CAPS

8


8


Elbow Clamp 900 2CMPClamp Ends

Part No. Tube Size A R152709 1.0” 2.000 1.500152715 1.5” 2.750 2.250152720 2.0” 3.500 3.000152725 2.5” 4.250 3.750152730 3.0” 5.000 4.500152740 4.0” 6.625 6.000

Part No. Tube Size A R152754 1.0” 1.125 1.500152755 1. 5” 1.437 2.250152757 2.0” 1.750 3.000152759 2.5” 2.062 3.750152761 3.0” 2.375 4.500152763 4.0” 3.125 6.000

Part No. Tube Size A B152475 1.5” 3.438 2.937152476 2.0” 4.562 4.062152477 2.5” 5.688 5.187152478 3.0” 6.812 6.312152479 4.0” 8.937 8.312

Wall.065.065.065.065.083

Elbow Clamp 900 x Butt-weld L2CM

Elbow Clamp 450 2KMPClamp Ends

304 STAINLESS STEEL ELBOWS

Part No. Tube Size A B Wall152470 1.5” 1.625 2.125 .065152471 2.0” 2.312 2.812 .065152472 2.5” 3.000 3.500 .065152473 3.0” 3.688 4.188 .065152474 4.0” 4.812 5.437 .083

Elbow Clamp 450 x Butt-weld 2KM

Elbow Clamp 900 w/ Hex Nut & Bevel PlainEnd 2FMP-14

Part No. Tube Size A B154070 1.5” 2.750 2.968154071 2.0” 3.500 3.750154072 2.5” 4.250 4.625154073 3.0” 5.000 5.406154074 4.0” 6.625 7.031

9


9


Part No. Tube Size A Wall152840 1.0” 2.062 .065152841 1.5” 2.937 .065152842 2.0” 4.062 .065152843 2.5” 5.187 .065152844 3.0” 6.312 .065152845 4.0” 8.312 .083

Part No. Tube Size A Wall152850 1.0” 1.500 .065152851 1 5” 2.250 .065152852 2.0” 3.000 .065152853 2.5” 3.750 .065152854 3.0” 4.500 .065152855 4.0” 6.000 .083


Part No. Tube Size A R152870 1.0” .625 1.50152871 1.5” .937 2.25152872 2.0” 1.250 3.00152873 2.5” 1.562 3.75152874 3.0” 1.875 4.50152875 4.0” 2.500 6.00

Wall.065.065.065.065.065.083

304 STAINLESS STEEL ELBOWS

Elbow Long Butt-weld 900 2S

Elbow Short Butt-weld 900 2WCL

Elbow Long Butt-weld 450 2KS

Elbow Short Butt-weld 450 2WK

U Bend Mitered

Part No. Tube Size A B155866 2.0” 6.00 7.000155867 3.0” 6.00 7.800155868 4.0” 9.00 9.500

10


10


Reducing TeeClamp Ends 7RMP

Tee Clamp 7MP152961 1.5”152962 2.0”152963 2.5”152964 3.0”152965 4.0”

5.5007.0007.0007.5009.000

2.7503.5003.5003.7504.500

152960 1.0” 4.750 2.375Part No. Tube Size A B

Part no. A152967 5.125152969 5.688152970 6.188152971 6.188152972 8.125

B2.5622.8443.0933.0934.063

C2.4062.8122.9063.0633.563

Tube Size2.0” x 1.5”2.5” x 2.0”3.0” x 1.5”3.0” x 2.0”4.0” x 2.0”

Part No. Tube Size A B Wall152880 1.0” 3.75 1.875 .065152881 1.5” 4.50 2.250 .065152882 2.0” 6.00 3.000 .065152883 2.5” 6.00 3.000 .065152884 3.0” 6.50 3.250 .065152885 4.0” 7.75 3.875 .083

Tee Long Butt-weld L7WWW

Tee Short Butt-weld 7WWW


B1.1251.6562.0622.3442.5943.438

304 STAINLESS STEEL TEES

Lateral Y Clamp 28AMP

Part No. Tube Size A B C152500 1.0” 7.000 1.500 5.500152501 1.5” 8.375 1.688 6.688152502 2.0” 9.750 2.125 7.625152503 2.5” 11.000 2.000 9.000152504 3.0” 11.750 2.375 9.375

11


11


304 STAINLESS STEEL ADAPTORS

Part No. Tube Size A154060 1.5” 1.843154061 2.0” 1.875154062 2.5” 2.000154063 3.0” 2.031154064 4.0” 2.344

Part No. Tube Size A152459 1.5” x 1.5” 1.687152460 2.0” x 2.0” 2.312152461 2.5” x 2.5” 2.344152462 3.0” x 3.0” 3.094152463 4.0” x 4.0” 3.406

B1.502.002.503.004.00

Clamp X Thread Adaptor17MP-15

Clamp X Hose Adaptor14MPHR

Part No. Tube Size A B152464 1.0” x 1.0” 2.250 .985152465 1.5” x 1.5” 2.250 1.025152466 2.0” x 2.0” 2.638 1.058152467 3.0” x 3.0” 3.070 1.634

Adaptor Clamp x Male NPT21MP– N.P.T. Pipe ThreadNon-3A

Adaptor Clamp x Hex nut17MP-14

Part No. Tube Size A152510 1.5” x 1.5” 3.00152511 2.0” x 2.0” 3.00152512 3.0” x 3.0” 3.75

In Line Ball Check Valve

Part No. Description152700 1.5” Check Valve Complete152701 Ball for 1.5” Valve152702 Pin For 1.5” Valve152705 2.0” Check Valve Complete152706 Ball for 2.0” Valve152707 Pin for 2.0” Valve

A2.5”

2.5”

12


12


304 STAINLESS STEEL REDUCERS

Part No. Tube Size A154077 2.0” x 1.5” 3.468154078 3.0” x 2.0” 5.656

Concentric Reducer PlainBevel X Threaded. B3115.

Reducer Butt-weld CncentricL31W

Part No. Tube Size A B152900 1.5” x 1.0” 2.00 1.50152901 2.0” x 1.5” 2.00 2.00152902 2.5” x 1.5” 4.00 2.50152903 2.5” x 2.0” 2.00 2.50152904 3.0” x 1.5” 6.00 3.00152905 3.0” x 2.0” 4.00 3.00152906 3.0” x 2.5” 2.00 3.00152907 4.0” x 3.0” 4.00 4.00

C1.001.501.502.001.502.002.503.00

Wall.065.065.065.065.065.065.065.083

Part No. Tube Size A B C Wall152990 1.5” x 1.0” 2.00 1.50 1.00 .065152991 2.0” x 1.5” 2.00 2.00 1.50 .065152992 2.5” x 2.0” 2.00 2.50 2.00 .065152993 3.0” x 1.5” 6.00 3.00 1.50 .065152994 3.0” x 2.0” 4.00 3.00 2.00 .065152995 3.0” x 2.5” 2.00 3.00 2.50 .065152996 4.0” x 3.0” 4.00 4.00 3.00 .083

Reducer Butt-weld EccentricL32W

Reducer Clamp Concentric 3114MP

Part No. Tube Size A152830 2.0” x 1.5” 3.000152832 2.5” x 2.0” 3.000152833 3.0” x 1.5” 7.000152834 3.0” x 2.0” 5.000152835 3.0” x 2.5” 3.000152836 4”.0” x 3.0” 5.125

Part No. Tube Size A152486 2.0” x 1.5” 3.000152487 2.5” x 2.0” 3.000152488 3.0” x 1.5” 7.000152489 3.0” x 2.0” 5.000152490 4.0” x 3.0” 5.125

Reducer Clamp Eccentric 3214MP

13


13


304 STAINLESS STEEL REDUCERS HEX NUTS & WRENCHES

Bevel Seat Hex Nut Stainlesssteel. 13H.

Wall Plate #29. Stainless steel decorativewall plate used on milk like tubing.

Part No. Tube Size A B152010 1.0” .906 1.812152015 1.5” .968 2.406152020 2.0” 1.062 3.000152025 2.5” 1.870 3.594152030 3.0” 1.281 4.188152040 4.0” 1.500 5.438

Part No. Tube Size A B C154090 1.5” x 1.0” 12.000 2.406 1.812154091 2.0” x 1.5” 14.000 3.002 2.406154092 2.5” x 2.0” 16.500 3.594 3.000154093 3.0” x 2.0” 18.000 4.188 3.000154094 3.0” x 2.5” 18.000 4.188 3.594

Double End Hex Wrench 25HA

Single End Hex Wrench 25H

Part No. Tube Size A B154095 1.0” 10.500 1.812154096 1.5” 12.000 2.406154097 2.0” 14.000 3.000154098 2.5” 16.250 3.594

154100 4.0” 19.500 5.438154099 3.0” 18.500 4.188

Part No. Tube Size A B154105 1.0” 1.0 5.0154106 1.5” 1.5 5.0154107 2.0” 2.0 5.0154108 2.5” 2.5 6.0

154110 4.0” 4.0 7.0154109 3.0” 3.0 6.0

Bevel Seat White Poly Hex Nut.13H.Part No. Tube Size A B192008 1.5” .968 2.406192011 2.0” 1.062 3.000192013 3.0” 1.281 4.188

Concentric Reducer Threaded XClamp B15C31

Part No. Tube Size A154080 2.0” x 1.5” 3.250

Part No. Tube Size A154079 2.0” x 1.5” 3.220

Concentric Reducer Plain Bevel xClamp B14C31.

14


14


AIR BLOW & Y- BALL CHECK VALVES

This valve is designed to pressurize lines with air to clean out productor cleaning solutions. It is failsafe because the simple air-to-openspring-to-close mechanism prevents back flow. Normally used with aY-ball Check Valve.

Features:-316 Stainless Steel Construction-Sizes for 1 1/2” to 4”-Conforms to 3A accepted practice 604-05-Filter required for use with milk

Sizing Guide

When usingY-Ball Check Valve

UseAir Blow Valve

1.5” 2.0”

2.0” 2.5”

2.5” 3.0”

Complete Valve W/ QuickConnect Air Connection

Complete Valve W/ FNPT .50”Air Connection

Size

152726 158150 1.5”

152727 158195 2.0”

152728 158200 2.5”

158203 158205 3.0”

Y-Ball Check ValvesThese valve are used to prevent reverse flow in systems moving liquid products. When the liquid flows into the inlet, the PTFE ball rolls up in thebranch of the valve allowing full fluid flow. When the flow stops, equalizing the pressure, the ball rolls back into the seat, preventing back flow.

Features of both models:-Polished ID & OD to 3A Standards.-316 stainless steel construction-Air Blow Valve can be added.-Maximum temperature rating of 250 F.

Part No. Complete Valve Line Size

155203 1.5”

155204 2.0”

155205 3.0”

Air Blow Valve

Part No. Complete Valve Line Size

155115 1.5”

155116 2.0”

Single Piece Model Two Piece Model

In Line Ball Check ValvePart No. Description152700 1.5” Check Valve Complete152701 Ball for 1.5” Valve152702 Pin For 1.5” Valve152705 2.0” Check Valve Complete152706 Ball for 2.0” Valve152707 Pin for 2.0” Valve

A2.5”

2.5”

15


15


Part No. Ref. No. Description

155230 4, 4A, 4B, 4C, 4D Air Blow Valve Service Kit

152120 2 Heavy Duty Clamp

181515 4 1.5” Gasket w/#10 Screen

155215 Repl. Filter Box of 200

Y-Ball Check Valve Parts

Part No. Ref. No. Description

155221 5A Ball Teflon for 1.5” Y-Ball Valve

155220 5A Ball Teflon for 2.0” Y-Ball Valve

155222 5B Seat for 1.5” Y-Ball Valve

152620 4 2.0” Solid End Cap

152625 4 2.5” Solid End Cap

159754 1.5” Ball and Seat Kit

159755 2.0” Ball and Seat Kit

152120 3 2.0” Heavy Duty Clamp

152125 3 2.5” Heavy Duty Clamp

155223 5B Seat for 2.0” Y-Ball Valve

Repair kits, containing a cap clamp gasket, ball and EPDM/CF-8M seat are available.

AIR BLOW & Y- BALL CHECK VALVES SPARE PARTS

Part No. Description

155210 Ball Buna for 1.5” Y-Ball Valve

155211 Ball Viton for 1.5” Y-Ball Valve

155212 Ball Buna for 2.0” Y-Ball Valve

155213 Ball Viton for 2.0” Y-Ball Valve

152120 2.0” Heavy Duty Clamp

152125 2.5” Heavy Duty Clamp

152620 2.0” Solid End Cap

152625 2.5” Solid End Cap

Parts for Single Piece ValveParts for Single Piece Valve

Service Kit Contains: 1-304 SS Spring, 1-SS Screen w/gasket, 1-StemGuide, 1-304 SS Retainer, 1-304 SS Stem w/plug.

Parts for Air Blow Valves

16


16


STAINLESS BUTTERFLY VALVES

Part No. Tube Size D153010 1.0” 3.50153015 1.5” 3.50153020 2.0” 3.80153025 2.5” 3.80153030 3.0” 4.10153040 4.0” 4.80




SPARE PARTS FOR BUTTERFLY VALVES

Part No. Description153052 Handle w/Locking Assy. for 1.0” to 3.0” Valve153054 Handle w/Locking Assy. for 4.0” Valve153053 Black Knob for Handle152413 Bolt for all Valves152142 Set screw for all Valves152143 Wing Nut only

Silicone Seat (red) Size EPDM (black)

153055 1.5” 153056153057 2.0” 153058153059 2.5” 153060153061 3.0” 153062153063 4.0” 153064

153090 1.0” 153091

REPLACEMENT SEALS

4 position locking handle – assembled with wing nuts for easy seal replacement - silicone seals standard – 304 StainlessPolished ID/OD

Part No. Tube Size A153045 1.5” 3.50153047 2.0” 3.80

CLAMP X CLAMPBUTTERFLY VALVE

THREAD X THREADBUTTERFLY VALVE

WELD X WELDBUTTERFLY VALVE

THREAD X MALVE BEVEL SEAT WITHCAPTIVE HEX NUTBUTTERFLY VALVE

THREAD X CLAMPBUTTERFLY VALVE

17


17


MGM Company offers a fill line of approved clamp and bevel seat pipeline gaskets. Selectfrom Buna (rubber), Teflon, EPDM or silicone. We also stock replacement valve O-ringsand tabbed valve gaskets. We will source special rubber components.

PIPELINE GASKETS

DUCKBILL DRAINS

FLAPPER VALVES

RUBBER COUPLINGS FOR VACUUM LINES

NO HUB COUPLINGS FOR DRAIN INSTALLATIONS

MILKLINE INLET CLOSURES

MILK VALVE PAD GASKETS

GASKETS W/STAINLESS STEEL SCREENS

SANITARY GASKETS, SCREENS & RUBBER COMPONENTS

18


18


REFERENCE SIZE

1.0” 1.5” 2.0” 2.5” 3.0’ 4.0”

40B Buna ClampGasket

181110 181115 181120 181125 181130 181140

40T Teflon Clamp Gasket

181410 181415 181420 181425 181430 181440

40F Flanged BunaClamp Gasket

181310 181315 181320 181325 181330 181340

Clamp Gasket w/#10 stainlessScreen

181515 181520 181525 181530 181540

40S Silicone Clamp Gasket 182410 182415 182420 182425 182430 182440

40WS Rubber gasket for SurgeFerruled Lines.

181341 181342

40BST Teflon Bevel SeatGasket

181450 181451 181452 181453 181454

SURGE Flapper for 1.5” lineWith Surge ferrule w/ 1.0” Flap.

276075

Delaval Standard Thick Flapperfor 1.5” Line w/.75” Flap.

275069

Westfalia Flapper for 1.5” linew/1.25” flap.

275070

40BSOBevel Seat Gasket

181210 181215 181220 181225 181230 181240

Bevel Seat EPDM 181211 181216 181221 181226 181231 181241

Bevel Seat Thin (Snap-Tite) 181015 181020

Glass Coupling Gasket 181010

T C Flapper for 1.5” & 2.0”For BouMatic & Classic Valvew/1.25” flap.

271207 271209

SANITARY GASKETS & FLAPPER VALVES

19


19


PIPELINE HANGERS

Part No.Complete

Tube Size A B Part No. Sleeveonly

195200 1.0” 3.425 1.450 195206

195201 1.5” 4.000 2.125 195207

195202 2.0” 4.500 2.500 195208

195203 2.5” 4.750 3.125 195209

195204 3.0” 5.500 3.750 195210

195205 4.0” 6.750 4.750 195211

Stainless Steel 2 pieceHex Hanger with ABSSleeves.

Part No.Complete

Tube Size A B Part No. Grommetonly

195220 1.0” 3.425 1.450 195226

195221 1.5” 4.000 2.125 195226

195222 2.0” 4.500 2.500 195226

195223 2.5” 4.750 3.125 195226

195224 3.0” 5.500 3.750 195226

195225 4.0” 6.750 4.750 195226

Stainless Steel 2 pieceHex Hanger with RubberGrommets.

195100 U Hanger 6.5” only195101 U Hanger 7.5” Extra Wide only195103 U Hanger Kit for 2.5” & 3.0” Line195107 Hanger clips only

195105 Extended U Hanger only195108 Extended U Hanger Kit for 2.5” & 3.0” line195107 Hanger Clips only

195104 L Hanger only195110 L Hanger Kit for 2.5” & 3.0” Line195107 Hanger Clip only

Block Style Pipe Line Hangers195300 1.0” Hanger Complete195301 1.5” Hanger Complete195302 2.0” Hanger Complete195303 2.5” Hanger Complete195304 3.0” Hanger Complete195305 4.0” Hanger Complete195306 Stainless Steel Rail 48”

U-Hanger with Blue Plas-tic Coating.

Extended U-Hanger withBlue Plastic Coating.

L-Hanger with Blue Plas-tic Coating.

Block Style Pipe LineHanger. (For stainlesssteel tubing)

20


20


Blue Plastic Milk valve . The standard inthe industry.

MILK VALVES & INLETS


213115 1.5” Valve Complete



213130 3.0“ Valve Complete

213102 Square Pad Gasket

213100 O-Ring (for under the SS slide)

CompleteMilk Inlet

MilkLine Size

Nipple ID-OD (inches)

Nipple only(4)

Gasket(2)

Clamp(3)

215180 1.5” - 2.0” 5/8-3/4 215200 213110 213116

215190 2.5” - 3.0” 5/8-3/4 215200 213110 213118

213114 1.5” - 2.0” 13/16-7/8 215220 213112 213116

215210 2.5” - 3.0” 13/16 -7/8 215220 213112 213118

215230 3.0” - 4.0” 13/16-7/8 215220 213112 213140

215175 1.5” - 2.0” 9/16 –5/8 NA 213111 213116

215232 3.0” - 4.0” 15/16-1.0 NA 213113 213140

Nipple ID-OD (mm)

14-16

16-18

16-18

20-22

20-22

20-22

24-26


213150 1.5” Valve Complete (Strangko)

213152 2.0” Valve Complete (Strangko)

Milk inlets Strap-Onstraight with stainless steelclamp. Designed to fit milklines from 1.5” to 4.0”.

Stainless Steel Gooseneck’s.

Stainless steel gooseneck /cane for older Sta-Rite/Universal Vac-Savmilk valves. Slide base is 1 7/8” x 1 7/8”. Fits 5/8” milk hose.

213107 Universal Vac-Sav Cane/gooseneck

Blue Plastic milk Valve

Gooseneck/canes fit all the slideson blue plastic and stainless steelmilk valves.

Vac-Sav Stainless Steel Gooseneck’s.

Strap-on Milk Inlets


213108 Gooseneck Standard 90D 5/8”

213109 Gooseneck Reverse 90D 5/8”

21


21


242006 Valve Plastic 5/8”

245104 Tabbed Gasket

245110 O-Ring

A-242010 Window for IBA & BouMaticbarrel claws. 2 3/16” ID x 2 7/16” OD x1/4”.B-242011 Claw gasket 2 3/16” x 2 7/16”x1.4” Fits BouMatic & IBA. (Gray)B-242012 Flat claw gasket 2 11/16”x 3”.For Germania style claw.

245100 Delrin 5/8”

245101 Delrin Vented 5/8”

245107 Delrin 3/4”

245108 Delrin 3/4” vented

245103 O-ring for 5/8”

245104 Tabbed gasket for 5/8”

Delrin Valve White Plastic Valve

Standard Fresh Cow Lid

Fits all stainless steel and poly buckets.With rap around gasket.

241300 Lid w/Gasket for 5/8” milkhose.

241302 Gasket only

Squeeze Clamp (Snap/pinch Clamp)

241117 For 5/8” ID Hose

241118 For 3/4” ID Hose

All stainless steel construction.

CLAWS - SHUT OFFS - FRESH COW - MILKER SHELLS

Stainless Steel Valve Parts (Tesa Valve)

242008 O-Ring (top)

242009 Tabbed Gasket (bottom)

242019 Seal Kit w/O-ring & gasket

Stainless Steel Shells

241240 DeLaval Rolled Edge 06Shell.

242100 Tapered stainlessSurge style with satin finish.

242105 Standard Bou-Matic stainless shell w/ribbed top.

AIR FORKS

TYPE 304- ELECTRO POLISHED & PLASTIC

241252 A Single – Single puls 3/8” OD x 1/4” ID

241247 B Twin — Front to Back 3/8” OD x 1/4” ID

241250 B Twin—Front to Back 5/16” OD x 9/32” ID

241264 C Twin Plastic -Front to Back 3/8” OD x 1/4” ID

241254 D Twin—Germania Style 5/16” OD x 9/32” ID

241256 D Twin —Germania Style 3/8” OD x 1.4” ID

241248 E Twin — Side to Side 3/8” OD x 1/4” ID

Air Forks Stainless steel & Plastic.

22


22


COMPLETE RECEIVER GROUPS

MGM Company can offer complete milk receiver assemblies to meet your customers needs. We also offer a complete list of component parts andassemblies to keep the milk receiver system maintained in top working order. Listed below is a system installation and spare parts ordering guidefor all of our parts and components. Call us for your complete receiver assemblies.

Ref. No. Part No. Description

1 Specify Motor for Pump

2 Specify Flapper Check Valve Location

3 152915 V-Insert Clamp 1.5”

3 181115 Pipeline Gasket 1.5”

4 Specify Receiver Stand

5 246047 Leg Set (3) for Stand

6 Specify Liquid level Control

7 Specify Custom Receiver Vessel

8 276004 Gasket for 18” diameter receiver cover

8 10026 Gasket for 26” diameter receiver cover

9 276065 3 Point Probe Assembly

Ref. No. Part No. Description

10 276003 Receiver Cover for 18” diameter receiver

10 10025 Receiver Cover For 26” diameter receiver

11 Specify Milk Inlet Custom

12 Specify J-Bend Trap Connector

12 Specify U-Bend Trap Connector

13 152930 V-insert Clamp 3”

13 181130 Pipe Line Gasket 3”

14 Specify Custom Vacuum Inlet

15 Specify Moisture Trap Complete

16 Specify Milk Pump Complete

301264 Vacuum Drain Valve w/Elbow (not Shown)

Receiver Parts Breakout

23


23


CUSTOM RECEIVER VESSELS

Milk Receiver Order Form. (Please photocopy and use this form when ordering custom receivers.Stainless steel receivers may be ordered with inlets welded at specific heights and locations on the receiver. Using the top view below, mark themilk and vacuum connections locations. For fabrication purposes the milk pump connection is always at the 90 degree location. On the side view,draw in the height of the milk inlets using the center line of the milk pump connection as a starting location. Please allow for 4 weeks to fabricatethe receiver plus shipping time to your location.

1. Size: Check one of the options listed.

Diameter X Height Capacity Milk Pump Connection

14” x 18” 10 Gallon 1.5” Ferruled

18” x18” 16 Gallon 1.5” Ferruled


Diameter X Height Capacity Milk Pump Connection



2. Milk & Vacuum inlet options. Check size and number of inlets.

Size Connection Option

2.0” Clamp Straight

2.0” Weld Straight

2.0” Clamp 45 Degree



Size Connection Option






Order Date:___________________ PO #:__________________ Expected Delivery Date:___________________________________________

Account Name:________________________________ Account Number:______________ Contact:_________________________________

Street Address:_________________________________ City:__________ _____State/Prov:___________ Zip/Postal Code_________________

Signature (Required)____________________________ Best way to contact if questions:___________________________________________(phone, fax, email)

Receivers do not come with covers and gaskets. Please see page 26 for cover and gasket options.

24


24


Stainless steel horizontal traps come with a see through Lexan cover, gasket andplastic float ball. 12” diameter x 18” long. (8 gallon Capacity)

276006 3.0” x 3.0” jumbo Trap Complete, clamp x male NPT276008 3.0” x 3.0” jumbo Trap Complete, clamp x clamp.276009 4.0” x 4.0” jumbo Trap Complete, clamp x male NPT276012 4.0” x 4.0” jumbo Trap Complete, clamp x clamp.276015 Trap Gasket only 11.0”ID x 13.0”OD.275072 Replacement Lid w/gasket & Stainless Hanger Tab

Stainless steel vertical traps parts.

276052 Complete 24 QT. Stainless Steel Trap with 3.0” X 3.0” clamp connections.276056 Replacement lid w/3.0” holes for 12 Qt. Trap.276055 Replacement float ball only for 2.0” trap.276054 Gasket for 24 Quart Vertical Trap 8.5” ID x 9.5” OD.276071 Duck Bill Drain276080 Rubber Cover for 3.0” White Ripple Plastic Trap. ( For clean out inlet)

U-Bend are used to connect horizontal traps to receiver.

276040 3.0” x 20.0” U-Bend with clamp x clamp ends276045 4.0” x 30.5” U-Bend with clamp x clamp ends.

J-Bend are used to connect vertical trap to receiver.

276049 2.0” J-Bend w/ clamp x male NPT ends.276048 3.0” J-Bend w/ clamp x male NPY ends.276047 3.0” J- Bend w/ clamp x clamp ends (SPECIAL).

276068 Floor Stand Complete for 18” diameter receivers w/out legs.276070 Floor Stand Complete for 26” diameter receivers w/out legs.246074 Leg set for floor stands.

Replacement Trap Float Balls276055 2.375” Plastic Ball for 2.0” traps.276017 3.50” Plastic Ball276018 4.25” Plastic ball for 3.0” traps.276024 4.75” Plastic Ball for 4.0” traps.276020 4.0” Stainless Steel Ball w/weighted side.276025 5.0” Stainless Steel Ball w/weighted side.276030 6.0” Plastic Ball

RECEIVER & VACUUM LINE COMPONENTS

Moisture Trap Balls

Jumbo Horizontal Moisture Traps

Vertical Moisture Traps & Parts

Floor Mount Receiver Stands

J-Bend Connections for Receivers

U-Bend Connections for Receivers

Moisture trap balls are rotational molded,from FDA approved poly virgin material.Balls weight about 1 to 1.2 lbs. depend-ing on the ball diameter.

25


25


301264 Drain elbow 1.5” x 90D kit. Includes elbow w/7/16” nipple and vacuumoperated 4” valve with plastic drain tube.241202 Diaphragm only 4.0”241204 Diaphragm only for small drain valve 2.75”241203 Tuber 3/8”ID x 1/2” OD for drain valve271205 Vacuum operated 4.0” drain valve only

271208 Valve seat Stainless , for 1.50” connection.271211 Valve seat Stainless, for 2.0” connection.275069 Flapper Valve DL Standard (thick) 1.5”271207 Flapper Valve BM & TC 1.5”271209 Flapper Valve TC 2.0”276075 Flapper Valve Surge 1.5”275070 Flapper Valve Westfalia 1.5”

276001 Clear Acrylic Cover w/1.5” hole for 26” diameter Receiver276054 Gasket for 26” diameter receiver (8.5” ID x 9.5” OD)276003 Clear Acrylic Cover & Gasket w/hole for 18” diameter receiver276004 Gasket for 18” diameter receiver (6.375” x 7.875”)276100 Clear Cover w/out hole for 18” diameter receiver276101 Clear Cover w/out hole for 26” diameter receiver

Milk Pump Stainless Steel CheckValve Seats & Flappers.

Vacuum Drain Valve

Receiver Covers & Gaskets

MILK PUMPS

Classic milk pumps are all stainless steel. Pumps are set to run using a 3450 RPM motors with akeyed shaft. (56C Frame Motors.)

27487 Pump assembly is can be used on a 3/4hp to 1hp motor. Pump has 1.5” clamp connection inand out and has a 3.0” 4 blade impeller that is rated to pump 45 gpm with 32 feet of head.

27488 Pump assembly is set up for a 1.5hp to 2.0 hp motor. Pump has 1.5” clamp connection in andout and has a 3.625” 4 blade impeller that is rated to pump 60 gpm at 45 feet of head. Using a1.5hp motor.276072 Classic Milk II Pump 3 piece seal kit

RECEIVER COMPONENTs

Thomsen Milk Pumps have a well-earned place in the dairy industry. Thomsen pumps installedon a milk receiver system are under vacuum and have a external seal assembly. This handy costsaving kit is for three horse power models, # 4, #5 & #6. Each kit contains: rotary seal assembly,ceramic seal, housing O-rings for models #4, #5, & #6 and impeller clip.

109222 Thomsen #4, 5 & 6, Milk Pump external seal kit

LC THOMPSON MILK PUMP REPAIR KITS

26


26


LIQUID LEVEL CONTROL

Universal use Liquid Level Control with Three Point Probe.Features: Wash/Manual Switch Dual Voltage Switch 110/220 volt NEMA 4 rated water resistance plastic enclosure Comes With Factory Wiring Suitable for Customer Wiring Complete Wiring Diagram Included with each unit. Controls Motors up to 1.5 horse power. Stainless steel probes can be easily cut to fit smaller receivers at the job site. Long Probes are 23” long, short probe is 19”long, made of approved stainless steel.


276059 Complete System w/3 point probe fits 1.5” hole in receiver cover (for 60Hz 120V electrical requirements)

276060 Complete System w/3point probe, fits 1.5” hole in receiver cover (specifyelectrical requirements for 50hz 220V overseas use)

276062 Replacement PC Board for 110V control.

276063 Replacement Cap and Cord assembly.

276064 Replacement 1.5” Nylon 3 point probe holder for receiver cover

276066 Control Box only less probe assembly for 110V.

276067 Complete 2.0” - 3 Point assembly w/ferrule connection

276069 Replacement rubber boot for probe assembly

276065 Complete 1.5” - 3 point probe assembly. (Probe, cord, cap & holder)

Liquid Level Control

27


27


MILK FILTRATION

MGM is the premier supplier of the original side exit milk filter frame. All frames are made of 304 stainless steeland polished inside and out to a beautiful approved finish. The large milk filter chamber and surface area of thefilter insert holder offers better milk filtration, less milk pump back pressure and less sediment blow by.

KEY FEATURESEasier filter change. No need to break the line.

Sizes to fit all types of systems.Built in quality. Each frame is pressure tested before shipment.

All spare parts are available.Made in the USA.

28


28


Part No. Closed End StylesDiameter x Length x Ports

1 Body Only 2 Insert only

121502 4 7/8” x 17” x 1.5” 121501 121503

121508 4 7/8” x 33” x 1.5” 121507 121509

121517 4 7/8” x 33“ x 2.0” 121514 121509

121518 4 7/8” x 33” x 2.5” NA 121509

Part No. Open End StylesDiameter x Length x Ports

1 Body Only 2 Insert only

121500 4 7/8” x 17” x 1.5” 121501 121503

121506 4 7/8” x 33” x 1.5” 121507 121510

121512 4 7/8” x 33 “x 2.0” 121514 121510

Part No. Ref. No Description

11140 3 4” Clamp Gasket

121530 4 Top Seal Gasket (white). For 17” & 33” filter.

121531 5 Two Tabbed O-ring. Fir 17” & 33” filter.

152140 6 Heavy Duty Clamp 4.0”.

121532 7 End Plug ( 3 Ear type)

Spare parts list for large capacity milk filter frames. Note end plug is only required onopen end models.

MILK FILTERS / STRAINERS

This original large capacity side exit milk filter frame has a closed endthat eliminates the rubber end plug. This feature allows for easier filterchanging and less sediment blow by. Uses filter socks and only one rub-ber tabbed O-ring to hold the filter on the stainless steel frame. Eachframe is precision made and tested before shipment. Comes completewith body, heavy duty clamp, insert and gaskets. NOTE: “copy cat”frame parts are not always interchangeable use only original MGMreplacement parts.

The original large capacity open end side exit milk filter frame with rub-ber end plug. Other copy cat frames parts do not interchange.

MAINTAINENCE: All rubber componentsshould be inspected and replaced fre-quently.

SMALLER CAPACITY MILK FILTER FRAMES

121533 Side Exit Filter 2.25” x 24” x 1.5” Closed End

121522 Side Exit Filter 3” x 23.5” x 1.5” Closed End


121520 Body only for 3.0 X23.5” filter

121536 Top white Seal for 2.25” x 24” Side Exit Filter.

121537 Filter hold O-Ring for 2.5 x 24” filter.

121538 Top white seal only for 3’ x 23” filter side exit.

121534 Filter hold O-ring for 3” x 23” filter.

121535 O-Ring For Rodgers 2.5” filter frame.

29


29


MGM offers a complete line of vacuum line components in low cost, attractive, easy to use White PVC

Pre Air Filters for 1 or 2 Pump Systems(100% stainless filters inside)

White PVC Pipe 1.5” through 8”

Complete line of White PVC Fittings 1” through 8”

Metric Adapters 3” x 75mm & 4” x 110mmOthers sizes on request

Vacuum Tanks 20 to 100+ Gallon Capacity

Complete line of Valterra® Gate Valves in Inch and Metric sizes1.5” to 8”

50mm to 160mm

Anti Reverse Valves / Check Valves

White PVCIntegrated Vacuum Line System

VACUUM SYTEM COMPONENTS

30


30


MGM has been the pioneer in the development and marketing of PVC Vacuum Tanks and Pre Air Filters. We are the exclusive agent for The Har-rington Corporation ( HARCO ).the premier manufacturer of PVC tanks. All MGM PVC tanks are manufactured from specially formulated resincompounds to assure uniform color, strength and fit of all inlets and end caps. All MGM tanks feature domed end caps for added strength . Precisequality control standards guarantee vertical inlets are in line to a tolerance of +/- 1º. We have an extensive line of standard sizes and configura-tions from in 12 to 15 and 18” Diameter with a wide selection of available fittings, mounting, drains filters & inserts. The fol lowing pages show someof the more popular sizes and configurations. The complete list of tanks sizes and configurations is very extensive. Please e-mail or call us di-rectly for questions about the right tank for your system. Tanks can also be ordered with removable lids and with float ball / shut off options. Mosttanks include floor stands or mounting straps and extra large 1.5” flapper drains.

PVC VACUUM TANKS

TANK VOLUME IN GALLONS & LITERS

Tank Diameter Tank Height Volume in US Gallons

15” 35” 27

15” 42” 32

15 59” 45

15 120” 92

18 120” 110

Volume in Liters

101

121

170

347

417

Proper sizing of tanks is an important consideration when designing a vacuum system. MGM does not install vacuum systems and therefore can-not make recommendations regarding the proper sizing or proper installation of Tanks . The Dairy System Manufacturer (OEM’s) and their certi-fied dealers are the best source for this information and are responsible for proper sizing and installation

Formulas used:Tank Volume: R2 x Height = cu/inch

Gallon Conversion: Cu Inch x 0.004329 = US GallonsGallons to Liters:U.S. Gallons x 3.783 = Liters

31


31


EXAMPLES OF VERTICAL PVC VACUUM TANKS

Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #

27/ 100 3” 5 396020 60-3


27/ 100 3” 5 396023 60-6

Capacity Gal /Liter

Inlet Size # ofInlets

MGM # HARCO #

36 /138 2 ea 3” & 3 ea 4” 5 396109 66-109

36 / 138 3” 5 396025 60-8

EXAMPLE OF CUSTOM TANK - QUOTED UPON REQUEST

HARCO MODEL66-87

32


32



27/ 100 3” 6 396024 60-7


45 / 172 3” 6 396023 60-6

45 / 172 4” 6 60-57

EXAMPLES OF HOZRIZONTAL PVC VACUUM TANKS


92 / 347 2 ea. 6” & 4-ea. 4”” 6 396674 66-74

92 / 347 4” 8 60-17

92 / 347 6” 6 60-71

33


33


EXAMPLES OF REMOVEABLE LID PVC VACUUM TANKS


45 / 172 3” 6 396014 60-135


41 /156 3” 2 396013 60-13


27 / 101 3” 6 396016 60-133

Some countries and perhaps some regions of the US require , removable end caps on the PVC Vacuum Tanks. This feature allows for cleaningand inspection of the interior of the tanks . It also aids in removing any debris that may accumulate in the tanks. MGM offers a wide variety of tankswith removable lids. A few of the more popular examples are shown below.

34


34


396026 15” End cap w/1.5” outlet

394058 15” End cap Enlarged for Tanks with removable end cap.

394050 1.5” Drain Valve

394048 Gasket, for 15” Tanks with removable end caps.

396030 Tank Wall Bracket (Set of 2)

396051 15” End Cap w/ 3 x 3” inlets (For standard tanks)

396032 15” End Cap Blank (no inlets) (For standard tanks)

276017 Replacement Float Ball for 3” Tank Outlet

276030 Replacement Float Ball for 4” Tank Outlet

61-9

931-73

931-66

931-15

61-3

931-72

Part No. Description Model No.

396052 15” End Cap w/ 1 x 3” inlet (For standard tanks) 61-12

369034 Leg Stand for Vertical Tanks 931-76

396027 6.0” X 23.75” PVC Tank for Portable Milkers.

EXAMPLES OF PVC VACUUM TANKS FLOAT BALL SHUT OFF

Model 60-243

Spare Parts for PVC Vacuum Tanks

Model 60-242

35


35


PVC PRE-AIR FILTERS

Filtered air is recommended for all vacuum pumps. Pre-Air Filter gives extra protection for vacuum pumps. Designed to filter out moisture and airborne contaminated debris prior to entering the vacuum pump.The units are constructed of non-corrosive white PVC with washable stainless steel filters.The size of the units coupled with the high filtration area offered by the insert helps reduce line fluctuation and reduces build-up on lobes and helpsextend vacuum pump and motor life.The improved removable lid makes it easy to inspected the filter screen on a regular interval. It should be cleaned or replaced as needed.Units come complete with floor stand, self draining flapper drain valve for single or dual vacuum pump systems. A PVC plug is included with dou-ble exit models to seal off the unneeded outlet. Custom configurations models are available.

394045 Gasket 12” U-Shaped

394050 Drain Valve w/flapper 1.5” NPT

394057 Lid PVC 12”

395001 Filter SS 18.375” x 23.25”

395005 Filter SS 11.5” x 18.5” (3 screen layers) comes in all cur-rent models

395007 Filter SS 11.0” x 18.375” x.375”

395009 Filter W/ PVC Frame 11.5” x 18.5” w/304 SS screen. (canbe trimmed to fit other filters)

395025 Baffle only

931-14

931-66

931-71

931-79

931-97

931-97A

931-99

931-69

Part No. Model Size In x Out

396022 60-4 Double 3.0” in x 2 x 3.0” out

396000 60-50 Single 4.0” in x 4.0” out

396050 60-110 Double 4.0’ in x 2 x 4.0” out

Complete Pre-Air Vacuum FiltersPre-Air Filter Spare Parts

Standard 3” & 4” filters with single & dual vacuum pump connections.

Part No. Model Size In & Out

396051 60-17 Single 6.0” in x 6.0” out

Standard 6.0” Vertical vacuum pump filters.

Part No. Model Size In & Out (15” x 39”)

396055 66-121 6.0” in x 6.0” out

Commercial duty horizontal pre air filter with 6.0” connec-tions in and out and with a 6.0” hinged back flow flappervalve.

395008 931-83 Filter SS 13.375” x 19.5” ( 2– required)

394055 931-701 Hinged Flapper 6.0”

Spare Parts for Commercial Pre air Filter

36


36


VACUUM LINE GATE VALVES

WHITE PVC VALVES

BLACK ABS VALVES

Part # Size Description Paddle Ctn/Qty

368101 50mm Slip x Slip Plastic 26




368401 110mm Slip x Slip Stainless Steel 6

368402 110mm Slip x Slip w/ Pneumatic Cylinder Stainless Steel 6






367101 1.5’ Slip X Slip Plastic 36

367201 2.0” Slip X Slip Plastic 20






364301 3.0” Slip X Slip w/stainless steel paddle Stainless Steel 12

361119 3.0” Female w/Slip Flange Plastic 12

366401 4.0” Slip X Slip Stainless Steel 6

366402 4.0” Slip X Slip Gray valve. Stainless Steel 6



367311 3.0” Slip X Tank Flange Plastic 18

GRAY METRIC VALVES

SPARE PARTS

361107 2.0” Valve Seat



361122 6.0” & 8.0” Valve Seat

361109 Plastic Handle for 1.5” to 3.0” Vale

361110 Metal Handle for 4.0” to 8.0” Valve

361003 3.0” Valve Seat & Hardware (Bagged)

361115 3” Replacement Body

37


37


PVC GATE VALVES FOR VACUUM LINES

FEATURES

APPLICATIONSINEXPENSIVE VALVES FOR INDUSTRIAL, AGRICULTURA AND COMMERCIAL MARKETS. THIS IS AN IDEAL VALE FORQUICK SHUT OFFIN LOW PRESSURE VACUUM LINES. ALSO WELL SUITED AS A DRAIN FOR TANKS.

1.5” White 1.50” Black 2.0” White 2.0” Black 3.0” White 3.0” Black 4.0” 6.0” & 8.0”

HUBS PVC ABS PVC ABS PVC ABS PVC PVC

BODY PVC ABS PVC ABS PVC ABS PVC PVC

SHAFT STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS

PADDLE POLYPRO POLYPRO POLYPRO POLYPRO POLYPRO POLYPRO STAINLESS STAINLESS

HANDLE PLASTIC PLASTIC PLASTIC PLASTIC PLASTIC PLASTIC ALUMINUM STAINLESS

SEALS SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE

PSI 45 45 40 40 30 30 20 10

MATERIALS AND SPECIFICATIONS

SIZE A B C D E F

1.5” PVC 6.50” 8.625” 2.875” 2.375” 3.9375” 3.375”

1.5”ABS 6.50” 8.625” 2.875” 2.375” 3.9375” 2.875”

2.0” PVDC 7.50” 10.25” 3.25” 2.75” 4.50” 3.125”

2.0” ABS 7.50” 10.25” 3.25” 2.75” 4.50” 3.50”

3.0” ABS/PVC 9.25” 13.0” 2.375” 3.9375” 5.1875” 4.50”

4.0” PVC 13.25” 18.0” 6.625” 5.0” 7.4375” 5.1875”

6.0” PVC 22.375” 31.125” 11.0” 7.25” 13.25” 11.125”

8.0” PVC 22.375” 31.125” 11.0” 9.3125” 12.1875” 13.75”

DIMENSIONS (SLIP X SLIP) VALVES

SOCKET DEPTH

1.5” 2.0” 3.0” 4.0” 6.0” 8.0”

.07” .75” 1.60” N/A N/A N/A

1.25” 1.60” 1.80” 1.70” 4.375” 5.67”

SIZE

ABS

PVC

A NOTE ABOUT CEMENTS

FITTING PIPE CEMENT RECOMENDATION

ABS PVC USE IPS # 793 OR EQUIVALENT

ABS ABS USE IPS # 771 OR EQUIVALENT

PVC ABS USE IPS # 793 OR EQUIVALENT

PVC PVC USE IPS # 705 OR EQUIVALENT

38


38


WHITE PVC VACUUM LINE PIPE

White PVC Pipe is the perfect material for vacuum lines. Clean appearance, low cost, ease of use and the wide variety ofcompatible white fittings make for a long lasting and good looking installation. MGM can be your single supply sourcefor all components needed for a complete white PVC vacuum line.

Made of the same material as the Pre Air Filters , Vacuum Tanks and compatible gate valves

Size Lengths Per Pallet(10 ft. or 20 ft/6 m.)

Feet Per Pallet10 ft. / 20ft/6 m

Meters Per Pallet10ft. / 20 ft/6 m

Pallet Weight10 ft. / 20 ft/6 m

1.5” 158 1580 / 3160 481.5 / 963 1580 lb. / 3160 lb.2.0” 210 2100 / 4200 640 / 1280 1050 lb. / 2100 lb.3.0” 92 920 / 1840 280.5 / 561 920 lb. / 1840lb.4.0” 57 570 / 1140 174 / 348 570 lb. / 1140 lb.6.0” 24 240 / 480 72 / 146 240 lb. / 480 lb.

PIPE SIZES AVAILABLE UP TO 18” DIAMETER

Size 20 ft/6 mLength #

10 ft Length # Per Meter # Per Foot #

1.5” 331018 331017 331016 3310152.0” 331023 331022 331021 331020

3.0” 331033 331032 331031 331030

4.0” 331043 331042 331041 331040

6.0” 661063 331062 331061 331060

39


39


5100015 1.5” 1005100020 2.0” 1005100030 3.0” 605100040 4.0” 25

Part # Size Box Qty

White PVC Coupling

5102251 2” X 1.5” 25

5102338 3” X 2” 205102422 4” X 3” 105102532 6” X 4” 4

Part # Size Box Qty

5102337 3” X 1.5” 25

Part # Size Box Qty5103020 2.0” 25

5101015 1.5” 1005101020 2.0” 1005101030 3.0” 305101040 4.0” 10

Part # Size Box Qty

White PVC Female Adapter

White PVC Reducer

White PVC Male Adapter

Part # Size Box Qty5105020 2.0” 505105030 3.0” 255105040 4.0” 10

White PVC Cleanout Adapter

COMMON WHITE PVC VACUUM LINE FITTINGS

40


40


White PVC Raised Plug W/Nut

White PVC Flush Bushing

Part # Size Box Qty5106030 3.0” 255106040 4.0” 30

Part # Size Box Qty5107251 2” x 1.5” 505107338 3” x 2” 305107420 4” x 2” 305107422 4” x 3” 30

5107532 6” x 4” 10

White PVC Flush BushingPart # Size Box Qty

5108251 2” x1.5” 50

White PVC Male Adapter Part # Size Box Qty5109020 2.0” 505109030 3.0” 255109040 4.0” 25

Part # Size Box Qty5112020 2.0” 255112030 3.0” 255112040 4.0” 105112060 6.0” 10

White PVC Clean Out AdapterWith Plug


41


41


White PVC 90° Bend

Part # Size Box Qty5300020 2.0” 505300030 3.0” 255300040 4.0” 10

5300060 6.0” 5

White PVC 90° Long Sweep Bend

Part # Size Box Qty5304020 2.0” 255304030 3.0” 10

5304040 4.0” 5

Part # Size Box Qty5321015 1.5’ 1005321020 2.0” 50

5321030 3.0” 20

5321040 4.0” 10

5321060 6.0” 3

White PVC 45° Bend

White PVC Double 90° BendPart # Size Box Qty

5327020 2.0” 255327030 3.0” 10

Part # Size Box Qty5400015 1.5” 1005400020 2.0” 355400030 3.0” 30

5400040 4.0” 5

5400060 6.0” 6

White PVC Sweep Tee


42


42


White PVC Vent Tee

Part # Size Box Qty5441020 2.0” 255441030 3.0” 10

5441040 4.0” 5

5441060 6.0” 4

White PVC WYE

Part # Size Box Qty5600020 2.0” 255600030 3.0” 25

5600040 4.0” 5

5600060 6.0” 4

White PVC Sch 40 tee

Part # Size Box Qty4401005 .05” 504401020 2.0” 25

4401030 3.0” 10

4401040 4.0” 5

4401060 6.0” 4

White Sched 40 Reduce TeeSlip x Slip x FPT

Part # Size Box Qty4402247 2” x 2” x .05” 104402249 2” x 2” x 1” 10

4402335 3” x 3” x 1” 10

White PVC Metric AdapterPart # Size Box Qty

4403750 3” x 75 mm 104403900 3” x 90 mm 104404110 4” x 110mm 10


43


43


Sched 40 white PVC Reducing90° Bend

Part # Size Box Qty

4406005 .05” 504406015 1.5” 25

Sched 40 White PVC 45 ° Bend Part # Size Box Qty

4417005 .05” 50

Sched 40 White PVC CouplingPart # Size Box Qty

4429005 .05” 504429015 1.5” 25

Sched 40 White PVC MaleAdapter

Part # Size Box Qty

4436020 2.0” 254436030 3.0” 104436040 4.0” 5

Sched 40 White PVC ReducerBushing

Part # Size Box Qty

4437250 2” x 1.25” 254437338 3” x 2” 104437422 4” x 3” 5

Sched 40 White PVC ReducerBushing

Part # Size Box Qty

4438249 2” x 1” 104438250 2” X 1.25” 104438251 2” X 1.5” 10

4438247 2” x .50” 10


44


44


Sched 40 White PVC ThreadedBushing

Part # Size Box Qty4439073 1/2” X 3/8” 50

Sched 40 White PVC CapPart # Size Box Qty

4447015 1.5” 254447020 2.0” 254447030 3.0” 104447040 4.0” 54447060 6.0” 5

Sched 40 White PVC Plug

Part # Size Box Qty

4449015 1.5” 254449020 2.0” 104449030 3.0” 104449040 4.0” 5


PVC check valveBackflow swing check valve.

Long Lasting.Heavy duty flapper with neoprene

O-ring seal.Horizontal installation.

Line Size Valve Complete Flapper w/O-ring

3.0” 223283 223288

4.0” 223284 223289

6.0” 223286 223290

Lid w/O-ring

223292

223293

223294

2.0” 223282 223287 223291

1.5” 223281 223287 223291

Inline swing style PVC check valve will help keep vacuum pumps fromrunning backward and helps prevent equipment damage, at shut off time.Designed to be mounted horizontal in the vacuum line on the intake side ofthe vacuum pump. Heavy duty flapper with neoprene O-ring seal.

45


45


301200 Fresh Air Filter Complete Assembly

301503 Replacement filter for fresh air and bottomair filter for models 350 & 500 Sentinel vacuum

Keeps pulsators clean and working prop-erly.Attaches to 3.0” PVC. Keeps dust andinsects out of vacuum line. One filter kitrecommended per 10 pulsators.

Fresh Air Vacuum Line Filter Kits

361055 Anti-reversing valve

Keeps the vacuum system safe. Keeps the pump from turning back-wards when system is shut down. Keeps foreign material from enter-ing the vacuum exhaust pipe. For 1.5 and 2.0” diameter exhaustpipes.

Anti-Reversing Check Valve

VACUUM COMPONENTS

Drip Drain Black Plastic (Vacuum Drain Valve)

363000 Drip Drain black plastic w/.50threads.

Drip Drain Brass (Vacuum Drain Valve)

363005 Drip Drain brass w/.50 threads

Delaval Lid to Interpuls Adaptor

241100 Bucket Lid Adaptor for Hyrdopuls 100241114 Bottom gasket for Hydropuls adaptor241113 Check Valve for Hydropuls adaptor.241130 Adjusting hand wheel for Delaval lid

241128 Adaptor for Delaval lid.241114 Bottom gasket for adaptor241115 Check Valve

241129 Interpuls to DV 300 adaptor

Delaval Hydropuls Lid Adaptor

Universal to Interpuls Adapter

361137 Interpuls to Universal adapter.

Delaval DV300 to Interpuls Adaptor

.363006 Drip Drain black plastic w/3/8”threads

46


46


PULSATORS & STALL COCKS

24 volt BouMatic style Pulsator has improved power consumption and exhaustports with good quality electrical contacts.

305000 Stanchion Mount Pulsator 24305001 Parlor Mount Pulsator 24V

Electric Pulsator Spare PartsPart No. Ref. Description

305020 1 Nipple O-Ring

305022 2 Coil Base O-Ring 1.625”

305023 3 Piston Base Cap

305024 4 Top Insert for Piston

305025 5 Nipple Protector

305026 6 Clean-Out Plug for Side

305027 9 Piston only

305028 11 White Base Assy. Stanchion

305029 10 Base Assy. Parlor Mount

305030 12 Contact Spring

305033 21 Coil only Red 24 volt

305055 Pulsator Repair kit

305031 20 Nipple/Suction tube Stainless Steel

Strap-on Stall CockGood quality, made of die-cast metal. Fits any size of PVC or stainless steeltubing. Fits, Strangko, BouMatic and Schlueter and Westfalia pulsators.305040 Strap-on Stall cock complete.305041 Strap-on Stall cock complete. w/64 -114mm clamp.305046 Stall cock repair kit.305043 Clamp only for 64 to 114mm pipe.

Thread-on Stall CockGood quality, made of die-cast metal. Fits any size of PVC or stainless steeltubing. Fits, Strangko, BouMatic and Schlueter and Westfalia pulsators.305042 Thread-on Stall cock complete305046 Stall cock repair kit.

Manual Stall CockPlated metal with tapered hose connection with manual on/ off lever andNPT threads.305048 Angled 90D Stall cock w/ .375” threaded connection305045 Straight Stall cock w/.375threaded connection363002 Angled 90D Stall cock w/ .50” threaded connection363004 Straight Stall cock w/.50”threaded connection

Strap-on Stall Cock

Thread-on Stall Cock

Manual Operated Stall Cock

241180 Pulsator repair kit for older Surge Belly Milker Pail System.Kit contains: 2 cylinder gaskets, 4 flanged expanders, 4 piston leathers, 1 O-ring, and 1 rubber tip.

303053 Pulsator repair kit for Surge Alternating Pulsator. Contains: 2 coilbase O-rings & 2 pistons w/rubber cap and base.

Repair Kit for Surge Vacuum & Electric Pulsator

305055 Repair kit includes: 2 pistons w/caps, 2 coil O-rings & 1 nipple gasket.

Repair Kiit contains: Ball, O-ring, 2-sleeves & contacts, 6 washers, 3 #6screws, 2 flat nylon washers.

47


47


WASH SINKS

Single Compartment, Regular Wash Sink 12 .25” Deep , 20.5” Wide

Deep Wash Sink, Single15.25” Deep , 22.0” wide

Part No. Model No. Gallons Length (inches)

420018 518 14 20

420022 522 18 24

420029 529 23 31

420036 536 29 38

420049 549 39 51.25

420060 560 48 60

420072 572 58 72


421818 51818 14/14 40 (18/18)

422222 52222 18/18 47 (22/22)

422229 52229 18/23 54 (22/29)

422929 52929 23/23 61 (29/29)

422236 52236 18/29 61 (22/36)

422249 52249 18/39 74 (22/49)

420615* 736015 15/60 81 (18/61.5)


420115 7315 15 18.5

420130 7330 30 33.5

420140 7340 40 43.5

420150 7350 50 53.5

420160 7360 60 63.5

420180 7380 80 75.5

Double Compartment Regular Wash Sink 12 .25” Deep , 20.5” Wide

Vertical Wash TankFeatures:-Dished Bottom-Made of Heavy Gauge Polished 304 Stainless-Comes with 2” x 14” Adjustable round legs-Removable 2-piece top lid-2” Drain Outlet Options:Ferrule on Drain OutletFlanged Holes available in LidCustom sizes available

Part No. Size(Gal.)

Height( overall)

Diameter TankHeight

423085 85 54” 26” 36”

423120 120 54” 30” 36”

423150 150 66” 30” 48”

423195 195 78” 30” 60”

423280 280 82” 36” 60”

Part # Description

422001 Hand Wash Basin Only

422002 Hand Wash Basin Complete w/ Mixing Faucet

422009 Mixing Faucet Only

(*Part number 426015 is a special Deep 15.25” Double Wash Sink.)

48


48


AISI 304 SS shield,9/16” wide bands and one piecescrew housings are mechanically interlocked forstrength. Neoprene Gasket conforms to ASTM C564. Use for Depend-O-Drain installation's.

422105 1.5” No Hub Coupling.


422012 Painted Legs Set ( Regular Sink)

422015 Painted Legs ( Deep Sick)

422005 Painted Bracket Set (Regular Sinks)

422008 Painted Brackets (Deep Sinks)


422000 Tank Drain Complete w/stopper

422021 Tank Drain Compete w/o stopper

422020 Rubber Stopper

422003 Drain Gasket

422025 Plastic Lock Nut

422022 Zinc Lock Nut

422004 3mm Rubber Gasket

WASH SINKS PARTS & ACCESSORIES

No Hub Coupling

Flexible CouplingFlexible couplings allows for a quick and easy to cast iron or plastic to cast iron or plas-tic. Also used as a strain relief and union for air or liquids. Includes 300 series stainlesssteel clamp.422150 1.5” Coupling422151 2.0” Coupling422152 3.0” Coupling422153 4.0” Coupling

Reducing Flexible Coupling

Flexible reducing coupling allows for a quick and convenient way to connect two differ-ent sizes of pipe. PVC to steel PVC to PVC. Makes and ideal way to connect a 2.5”vacuum pump inlet to 3.0” PVC vacuum line. Also handy has a vibration protectionfrom pump to line coupling. 300 series stainless steel clamps included.422154 2.5” x 3.0” Reducing Coupling422155 3.0” x 4.0” Reducing Coupling

Quick Caps Quick Cap offer a quick, easy way to cap pipe ends, cleanout, and open test pipe.Made of flexible PVC they are made for above ground or underground use.

422170 1.5” Quick Cap422171 2.0” Quick Cap422172 3.0” Quick Cap422173 4.0” Quick Cap

49


49


CIP Wash Equipment

Distributor Tee’s 241242 Distributor SS w/out tee241244 Distributor SS with out of line tee.241246 Distributor SS with in line tee.241249 Smooth plastic tee421002 Distributor w/o tee black plastic276071 Duck bill drain

Duck Bill Drain Rubber

276071 Duck Bill Drain Each

276073 Box of 100

Nipple closures are available inblack and brown rubber. Fits 9/16”and 5/8” ID milk line inlets.

241258 Rubber Nipple Closure(Black)

Nipple/Inlet Closures

Silicone Diaphragm

Replacement silicone diaphragm for 48000vacuum operated plastic valve also for West-falia Metatron and BM sensors.

241200 Diaphragm each

Inflation/Liner Plug ISO-Model

Plastic ISO artificial teat plugs are used on every farm. Plugs arealso required to do pulsator and vacuum system performancetesting. Plastic plugs are available in black or orange and can bepacked or bagged to fit your distribution needs. Call for informa-tion .242120 Orange Inflation/Liner Plug ISO-Model242121 Black Inflation/Liner Plug ISO-Model

Plastic double hose clip are de-signed to hold twin pulsation hoseto milk hose. Wide 3/4” designkeeps clip for causing any hoserestrictions.

245128 Black Double Hose Clip245230 Blue Double Hose Clip

Hose reinforcing spring. Made ofstainless steel. Used to reinforce themilk hose connections to keep hosesfrom kinking. For use on milk houseup to 1.125 (28 mm) OD. 5.5” long x1.125 ID.

245120 Hose Support Spring. 5.5” long x1.125” ID.

Tube/Hose Clip.Clip holds twin vacuum tubingtogether with 5/8” milk hose.

245125 Black Plastic Clip

50


50


BENDER MODEL 2800 AIR INJECTOR

MGM # Item # Bender # Description

412832 1 2832 Fuse holder

412831 2 2831 Fuse 2 AMP.

412806 4 2806 Timer-Adj. On/Off 1 to 30 Sec.

412865 9 2865 Sponge Rubber Cushion

415519 10 5519 Solenoid 120Vac

415530 10 5530 Solenoid 240Vac

412891 22 2819 Stopper Rod Assembly

412812 14 2812 Stopper Rod Busing

412846 12 2846 External Spring

415998 9 5998 Rubber Cushing

MGM # Bender Model Description

412820 2800-240V-60 Bender Air Injector 240VAC W/1.5” Ferrule

412802 2800-x Bender Air Injector 240 VAC less Solenoid

412800 2800 Bender Air Injector 120VAC W/1.5” Ferrule

412803 2800-240-50 Bender Air Injector 240VAC 50HZ w/1.5” Ferrule

412804 2800-200 Bender Air Injector 200VAC W/1.5” Ferrule

Complete Control Modules

Spare Parts

Features:1. Designed for larger diameter pipelines.2. Sponge rubber shock absorbing air valve.3. Powered by new solenoid w/adjustable on/

off timer w/slide valve.4. Can be mounted on the wall or pipeline.

51


51


BENDER MODEL 8950 TIMER CONTROL MODULE


412832 2 2832 Fuse holder

412831 7 2831 Fuse 2 AMP.

415513 9 5513 Pressure Switch

418926 14 8926 Fail Timer 100 Minute , 120 VAC

418927 14 8927 Fail Timer 100 Minute , 240 VAC

419750 17 9750 Timer 120 VAC

418752 17 9750-240 Timer 240 VAC

419257 18 9257 24 Hour Clock 120VAC

418238 18 8238 24 Hour Clock 240VAC-60HZ

419240 18 9240 24 Hour Clock 240VAC-50HZ

416265 3 6265 Toggle Switch


418950 8950 Bender Timer Control Module 12VAC

418951 8950-240-60 Bender Timer Control Module 240VAC-60HZ

418952 8950-240– 50. Bender Timer Control Module 240V-50HZ

Key Features:1. Standard 8 Minute Wash Cycle2. Electro—Mechanical Timer3. Failsafe indication4. 24—Hour Clock for Automatic Pre-sanitize.5. Door Interlock6. Combine with 3 Peristaltic pump model9590 or 9740 jar Dispensers.7. Door interlock.8. CSA approved.

Complete Control Modules Less Drain Valve

Spare Parts.

52


52


BENDER MODEL 7540 DIVERTER


417540 7540 Bender Diverter Valve 120V

417542 7540-240V Bender Diverter Valve 240V

417543 7540-X Bender Diverter Valve lest Solenoid.


416071 17 607-C Bellows

416018 21 60183 Stopper Rod Assembly

412578 22 2578 Bushing

412584 23 2584 External Retaining Ring (3 req.)

412582 25 2582 Spacer Washer

412583 25 2583 Internal Retaining Ring

416022 29 60227 Stopper Plug

Spare Parts.

Complete Diverter Valves


412563 8 2563 Gasket (2 required)

412563 8 2563 Gasket (2 required)

412659 9 2659 Lower Housing

415519 13 5519 Solenoid 120VAC/50-60HZ

415530 13 5530 Solenoid 240VAC/60HZ

415532 13 5532 Solenoid 240VAC/50HZ

412560 14 2560 Upper Housing

Specifications:1. Model 7540, 120VAC / 50-60

HZ., .740 AMPS.2. Duty Cycle: On Max. 17.5

Minutes. Off Min. 4.5 Min-utes. For 2 Cycles.

1. Model 7540-240, 240VAC /50-60HZ., 740 AMPS.

2. Duty Cycle: On Max. 17.5Minutes. Off Min. 4.5 Min-utes. For 2 Cycles.

53


53


BENDER MODEL 9590 PERISTALTIC PUMP DISPENSER MODULES

MGM # Item Bender # Description

1 8908 Adjustable Timer , 120VAC,1 - 1023 Second

418908 1 8909 Adjustable Timer , 240VAC,1 -1023 Second

419565 5 9565 Roller Assembly

419576 8 9576 Hi Speed Motor 120VAC, 120RPM

419561 8 9561 Hi Speed Motor 240VAC, 50HZ120 RPM

419597 9 9577 Squeeze Tube Assembly 3/8 ID x 5/8” OD

419257 11 8885 Water Valve With Bracket

412551 11A 32551 Water Valve Coil. 120VAC

412550 11A 32550 Water Valve Coil. 240VAC

MGM No. Bender Model Description

419590 9590 Bender Peristaltic Pump Dispenser 120V, W/water Valves

419592 9590-240V Bender Peristaltic Pump Dispenser 240V, W/water valves

Complete Pump Units less Drain Valve.

Spare Parts.

Features:1. 3 - 20 oz. (590 ml)per minute mo-

tor Driven Peristaltic Pumps.2. Switch Programmable timing to set

pump output. (From 1 to 1023 sec-onds)

3. Hot & Cold Water Valves Includedon Model # 9590. (20 GPM)

4. Detergent, Acid and Sanitize Ca-pacity of 300 OZ. (9,000 Ml)

5. Input Plate for Wash Vat Included.6. Inlet hose w/ weight & screen.7. Used with 8950 Control Module8. CSA Approved.

418876 13 8876 Outlet Adaptor

418814 17 8814 Inlet Adaptor, 3/4”

418869 18 8869 Pressure Hose 1/2” ID x 6 Ft.

411403 20 1403 Hose Screen Gaskets

412678 29 2678 Bottle Cap for Large Container

412528 30 2528 Weight Ceramic

412530 31 2530 Screen

419585 33 9585 Squeeze Tube Replacement Kit

MGM # Item Bender # Description

410788 788 Check Valve Assembly for 3/8” Tub

54


54


Heavy Duty Split Guard Safety Hobble

NEW 2” wide cow hobble designed for more strength with slightly longer spread forlarger cows to walk freely. Same single unit design features twin locking nickel platedhardware and easy off adjustable Velcro brand hook and loop securing leg straps. Verystrong but soft.

259103 1 pk, 2.0” wide x 21” long

Split Guard Safety Hobble

Strong, lightweight cow hobble provides ideal protection against slipping and splitting outin all conditions especially after calving.. Unique one piece design features easy on andoff adjustable VELCRO brand hook and loop securing leg straps. A spread of 21 “ allowscows to walk freely while wearing Split Guard.

259102 1 pk, 1.5” wide x 21” long.

Leg Bands

Ideal for marking cows with color identifica-tion system.Made of tough nylon VELCRO brand hookand loop material. Leg bands are washableand reusable and can be numbered withpermanent marker. All colors of Velcro legbands are packed 10 per clear plastic bagwith a blank header card.

259091 RED

259092 YELLOW

259093 ORANGE

259094 BLUE

259095 GREEN

259096 NEON GREEN

259097 NEON YELLOW

259098 NEON PINK

259099 NEON ORANGE

LIVE STOCK CARE

Teat Dip Sprayer Hand operated Trigger sprayer, sprays upwardso that a solid spray covers the teats with teatdip. The blue nozzle with stainless insert isresistant to teat dip chemicals. Also availablewith a 4”extended nozzle.

255200 Complete sprayer w/standard nozzle &24 oz. bottle.

255202 Trigger & tube

255204 Bottle only 24 oz.

255201 Blue Standard Nozzle only

292004 Blue 4” Extended Nozzle only

255205 Bottle only 16 oz.

255207 Complete sprayer w/extended nozzle.

55


55


STAINLESS DISPENSER - HOSE CHUTES - MILKHOUSE DESK -TOWELS

All stainless steel construction Brushed Polish Finish Easy Front Load & mounts on wall Accommodates folded and Round paper towels424012 SS towel Dispenser

Made of heavy gauge Polished Stainless Steel Unique Latch Keeps door Closed Tightly to Keep Insects out. Stainless Steel Piano Hinge Rough Openings are 6” x 6”424509 Telescopic hose chute stainless, 5” to 9”424513 Telescopic hose chute stainless, 9” to 13”

Barn DeskStainless Steel wall MountRoom for records, chartboxes, note pads, etc.Lid folds down for a stablewriting surface.Latch Keeps desk closedtight when not in use.

424010 Barn Desk

Milk Filter Dispensers Hinged Doors for Easy Loading Magnetic latch keeps door closed Stainless Steel Hinge Made of 22 Gauge polished Stainless. Two popular sizes available

424024 3” X24” Holds milk Filter socks ortubes up to 3 in. wide.424036 4/7/8 x 36” Holds all 33” & 36” longmilk Filter Socks & Tubes.

Hose Chutes Telescoping Stainless Steel

Paper Towel Dispenser

Barn Desk Milk Filter Dispenser

Hose Chute Telescoping GalvanizedGalvanized hose chute features 24-guage construction, inside u-shaped door with rollededge. Self closing outer door. Extends from 5” to 9” and rough opening is 6” x 6”.

192010 Galvanized hose chute

Microfiber Premium Dairy Towels. Practical size 12” x 12” light blue or yellow microfiber towels. Use them wet or dry andthey will absorb 7 to 8 times their own weight in water. Microfiber works by attracting dirtand other contaminants like a magnet and trapping them within very fine microscopicfilaments. The fibers are so tiny they are able to remove 99% of bacteria. Due to theirsuperior quality, these microfiber towels can be washed and reused hundreds of times.Machine wash, tumble dry low heat, and do not iron. Do not use fabric softener or chlo-rine bleach. Microfiber towels are packed 50 towels per clear plastic bag with 5 packs percase. Each pack of 50 contains washing instructions. Minimum order is 1 case. Palletcontains 36 cases.

259302 Yellow 28 gram Microfiber towels, case of 250. (5 packs of 50 towels)259303 Blue 34 gram Microfiber towels case of 250. (5 packs of 50 towels)

56


56


Description Page Description PageClamps 4 Pre-Air Filter 35Hose Clamp 4 Vacuum Air Filter 35Pipeline Clamp 4 Final Air Filter 35Ferrules 5,6 Vacuum Gate Valve 36,37End Caps 7 Gate Valve 36,37Elbows, Stainless Steel 8,9 PVC Pipe 38U-Bend 9 PVC Fittings 39 - 44Tee, Stainless Steel 10 Vacuum Check Valve 44Y-Lateral 10 Drip Drain 45Adaptors, Stainless Steel 11 Vacuum Line Drain 45Reducers, Stainless Steel 12,13 Fresh Air Filter 45Hex Nuts 13 Interpuls Adaptors 45Wrench, Hex Nut 13 Pulsator Adaptors 45Wall Flange 13 Anti-Reversing Check Valve 44,45Air Blow Valve 14,15 Pulsator 46Y-Ball Check Valve 14,15 Stall Cocks 46Check Valves, Stainless 14 Wash Sinks 47In Line Ball Check Valve 14 Hand Wash Sink 47Butterfly Valve 16 Wash Sinks Mounting Legs 48Gaskets, Pipe Line 18 Tanks Drains 48Flapper Valves 18 Ho-Hub Coubling 48Pipeline Hanger 19 Rubber Coublings 48Milk Valves 20 Distributor Tees 49Milk Inlets, Stainless Steel 20 Duck Bill Drain 49Shut-Offs 21 Hose Clips 49Delrin Valve 21 Hose Spring 49Air Forks 21 Spring, Hose Reinforcing 49Milking Shells 21 Silicone Diaphragm 49Shells 21 Inflation Plugs 49Receivers 22,23 Liner Plugs 49Moisture Traps 24 Goosenecks 20Traps 24 Fresh Cow Lid 21Float Ball 24 Bender Washing Equipment 50 - 53Balls, Plastic 24 Leg Bands 54Covers 25 Hobbles 54Vacuum Drain Valve 25 Teat Dip Sprayers 54Milk Pump 25 Sprayers 54Liquid Level Control 26 Dairy Towels 55Milk Pump Control 26 Micro-Fiber Towels 55Milk Filters/Strainers 28 Dispensers 55PVC Tanks 30 - 34 Hose Chute 55Balance Tanks 30 - 34Header Tanks 30 - 34Distribution Tanks 30 - 34

ALPHABETICAL INDEX

57


57


PART NUMBBER TO PAGE NUMBER INDEX

109222 -- 25 152130 -- 4 152487 -- 12 152755 -- 8 152903 -- 12121500 -- 28 152140 -- 4 152488 -- 12 152757 -- 8 152904 -- 12121501 -- 28 152142 -- 16 152489 -- 12 152759 -- 8 152905 -- 12121502 -- 28 152143 -- 16 152490 -- 12 152761 -- 8 152906 -- 12121503 -- 28 152160 -- 4 152500 -- 10 152763 -- 8 152907 -- 12121506 -- 28 152161 -- 4 152501 -- 10 152830 -- 12 152915 -- 4121507 -- 28 152210 -- 5 152502 -- 10 152832 -- 12 152920 -- 4121508 -- 28 152215 -- 5 152503 -- 10 152833 -- 12 152925 -- 4121509 -- 28 152220 -- 5 152504 -- 10 152834 -- 12 152930 -- 4121510 -- 25 152225 -- 5 152510 -- 11 152835 -- 12 152940 -- 4121512 -- 28 152230 -- 5 152511 -- 11 152836 -- 12 152955 -- 4121514 -- 28 152240 -- 5 152512 -- 11 152840 -- 9 152960 -- 10121517 -- 28 152310 -- 5 152615 -- 7 152841 -- 9 152961 -- 10121518 -- 28 152315 -- 5 152620 -- 7 152842 -- 9 152962 -- 10121520 -- 28 152320 -- 5 152621 -- 7 152843 -- 9 152963 -- 10121522 -- 28 152325 -- 5 152622 -- 7 152844 -- 9 152964 -- 10121530 -- 28 152330 -- 5 152623 -- 7 152845 -- 9 152965 -- 10121531 -- 28 152340 -- 5 152625 -- 7 152850 -- 9 152967 -- 10121532 -- 28 152410 -- 5 152630 -- 7 152851 -- 9 152969 -- 10121533 -- 28 152413 -- 16 152640 -- 7 152852 -- 9 152970 -- 10121534 -- 28 152415 -- 5 152651 -- 7 152853 -- 9 152971 -- 10121535 -- 28 152420 -- 5 152652 -- 7 152854 -- 9 152972 -- 10121536 -- 28 152425 -- 5 152653 -- 7 152855 -- 9 152990 -- 12121537 -- 28 152430 -- 5 152654 -- 7 152860 -- 9 152991 -- 12121538 -- 28 152440 -- 5 152655 -- 7 152861 -- 9 152992 -- 12150000 -- 4 152450 -- 5 152659 -- 7 152862 -- 9 152993 -- 12150003 -- 4 152451 -- 5 152661 -- 7 152863 -- 9 152994 -- 12150007 -- 4 152452 -- 5 152662 -- 7 152864 -- 9 152995 -- 12150008 -- 4 152453 -- 5 152663 -- 7 152865 -- 9 152996 -- 12150009 -- 4 152454 -- 5 152700 -- 11 152870 -- 9 153010 -- 16150012 -- 4 152459 -- 11 152701 -- 11 152871 -- 9 153015 -- 16150013 -- 4 152460 -- 11 152702 -- 11 152872 -- 9 153020 -- 16150014 -- 4 152461 -- 11 152705 -- 11 152873 -- 9 153025 -- 16150015 -- 4 152462 -- 11 152706 -- 11 152874 -- 9 153030 -- 16150019 -- 4 152463 -- 11 152707 -- 11 152875 -- 9 153040 -- 16150022 -- 4 152464 -- 11 152709 -- 8 152880 -- 10 153045 -- 16150025 -- 4 152465 -- 11 152710 -- 4 152881 -- 10 153047 -- 16150027 -- 4 152466 -- 11 152712 -- 4 152882 -- 10 153049 -- 16150029 -- 4 152467 -- 11 152713 -- 4 152883 -- 10 153050 -- 16150033 -- 4 152470 -- 8 152714 -- 4 152884 -- 10 153051 -- 16152010 -- 13 152471 -- 8 152715 -- 8 152885 -- 10 153052 -- 16152015 -- 13 152472 -- 8 152716 -- 4 152886 -- 10 153053 -- 16152020 -- 13 152473 -- 8 152720 -- 8 152887 -- 10 153054 -- 16152025 -- 13 152474 -- 8 152725 -- 8 152888 -- 10 153055 -- 16152030 -- 13 152475 -- 8 152726 -- 14 152889 -- 10 153056 -- 16152040 -- 13 152476 -- 8 152727 -- 14 152890 -- 10 153057 -- 16152105 -- 4 152477 -- 8 152728 -- 14 152891 -- 10 153058 -- 16152115 -- 4 152478 -- 8 152730 -- 8 152900 -- 12 153059 -- 16152120 -- 4 152479 -- 8 152740 -- 8 152901 -- 12 153060 -- 16152125 -- 4 152486 -- 12 152754 -- 8 152902 -- 12 153061 -- 16

58

MAIL: PO BOX 8186 NAPLES, FL 34101

dairy equipment product guide - mgm companymgmcompany.com › catalog ›...

Documents