data sheet - page 1 miniature low profile 24v linear led
TRANSCRIPT
T +44 (0)1322 527 629 E [email protected] www.lightgraphix.co.uk
LightGraphix reserve the right to change specifications without noticeData sheet issued: 1 June 2016
Data sheet - Page 1LD11Miniature Low Profile 24V Linear LED
Desig
n: B
rillia
nt L
ightin
g
Proje
ct: P
rivat
e Re
siden
ce
Pro
duct:
LD1
2
LD11 is housed in a very low profile polycarbonate extrusion, allowing it to be used in very small details. A custom plastic mix was developed, which adds a slight frost for an even, diffused wash. Ideal for a range of architectural applications that include steps and small niche details.
Key FeaturesChoice of LED outputs depending on the application, including RGBEconomical solution compared to bare LED tapeAdded advantage of protecting LEDs from impacts, dust and moistureRange of fixing options depending on the detailFlexible in the vertical plane to a minimum bend radius of 500mm IP67 rated version for wet environmentsIntegral anti-wicking barrier on the IP67 version increases protection against moisture ingress, due to incorrect IP rated cable connections (excludes RGB version)Lengths are custom made to suit to a maximum of 4022mm**, so no dark spots!Available with Switched, 1-10V, DMX or Dali drivers
-------
-
-
11
16
/SC Spring Clip
140°
DIM
6.5
6.5
16
4
45°
14.5
14.5
/SC45 45° Spring Clip
LD11
Scaled Drawings.Use common elemtents, such as surfaces. But keep cables to scale.
21.5
21
/E2121 ‘U’ Channel
16
19
19
/L1919 ‘L’ Channel
19
19
/L1919 ‘L’ Channelwith /SC45 45° Spring Clip
16
16
11 45°
1:1 Scale forCAD Download
Template for Scaling70%
9
15
11
16 14.5
14.5
LD11 /SC Fixing Clip /SC45 45° Fixing Clip
21.5
21
19
19
/E2121 ‘U’ Channel /L1919 ‘L’ Channel
19
19
/L1919 ‘L’ Channelwith /SC45 45° Fixing Clip
4
3616
4
16.56.5
16 16
DIM
6.5 6.5
LD11
16
4
DIM
17 7
LD11/IP67 with PTFE single cores
4
16
17
DIM
7
LD11/IP67 with standard 2 core exterior cable
16
13
17
4
23.5
6
MinDIM
MinDIM
20
20
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
20
6.5
Specify DIM
16(Dimensions in mm)
46.5
Dimensions
140°
** Shipping and practicalities of installation need to be considered when specifying long lengths
T +44 (0)1322 527 629 E [email protected] www.lightgraphix.co.uk
LightGraphix reserve the right to change specifications without noticeData sheet issued: 1 June 2016
Data sheet - Page 2LD11Miniature Low Profile 24V Linear LED
LED output options Eco220 lm/m
Short780 lm/m
RGB Eco180 lm/m
Applications
Highlighting architectural details, steps
Same applications as Eco but with increased output
and closer pitch LEDs
Colour change
Description Eco output tape Short pitch tape Eco RGB tapeColour Temperature 2700K / 3000K 4000K 2700K / 3000K 5000K -Delivered lumens / m 220lm/m 240lm/m 780lm/m 850lm/m 180lm/mWatts / m 3.6W/m 9.7W/m 6.5W/mLumens per watt 61lm/w 80lm/w -Voltage (V) 24V DCCRI 85 -LED Osram FlexLED cut increments 100mm 50mm 150mmLED spacing 20mm 8.3mm 30mmMin single length 113mm 63mm 165mmMax single length* 4022mm 4015mmLED lifetime 50,000hrs (to 70% lumen output)Max ambient temperature 45°CMinimum bend radius 500mmMaterials Polycarbonate extrusion, end caps, and fixing clips. 0.5mm anodised aluminium heat sinkCable length 2m (can be specified with up to 10m at extra cost)IP rating IP54 (IP67 option)
* Shipping and practicalities of installation need to be considered when specifying long lengths
- LD11 is flexible in the vertical plane (around the thinnest side) to a minimum bend radius of 500mm. Cable ties might be needed to fix the profile into the clips. Further details can be found on the instruction leaflet.
- To achieve an IP67 rating, resin is used to seal each end of the product, and the cable upgraded to an exterior version. This does create a larger gap between the last LED and the end of the extrusion, so particular attention needs to be paid to the mounting detail to avoid a gap in the light between multiple lengths. Please see the suggested mounting details section on page 3 for more information.
45°
1:1 Scale forCAD Download
Template for Scaling70%
9
15
11
16 14.5
14.5
LD11 /SC Fixing Clip /SC45 45° Fixing Clip
21.5
21
19
19
/E2121 ‘U’ Channel /L1919 ‘L’ Channel
19
19
/L1919 ‘L’ Channelwith /SC45 45° Fixing Clip
4
3616
4
16.56.5
16 16
DIM
6.5 6.5
LD11
16
4
DIM
17 7
LD11/IP67 with PTFE single cores
4
16
17
DIM
7
LD11/IP67 with standard 2 core exterior cable
16
13
17
4
23.5
8
MinDIM
MinDIM
20
20
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
20
817
Specify DIM
87
The above dimensions apply to the IP54 rated RGB Eco LD11. This is to allow extra space to connect the 4 cables to the LED board.
LD11/IP54/EcoRGB
10
DIM
58
LD11/IP54/EcoRGB
10
DIM
58
Specify DIM
108
5
(Dimensions in mm)
Flexible IP67 Rated
RGB IP54 rated
Photometric files are included in the design pack which can be downloaded from the LD11 product page on the website.
Photometrics
T +44 (0)1322 527 629 E [email protected] www.lightgraphix.co.uk
LightGraphix reserve the right to change specifications without noticeData sheet issued: 1 June 2016
Data sheet - Page 3
Fixing Options
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
MinDIM
13
17
4
26
8
IP54 / IP672 lengthswith noncable exitend butted up
IP54More than2 lengths
IP67More than2 lengths
20Min DIM
20Min DIM
40Min DIM
MinDIM
17
MinDIM
LD11Miniature Low Profile 24V Linear LED
45°
1:1 Scale forCAD Download
Template for Scaling70%
9
15
11
16 14.5
14.5
LD11 /SC Fixing Clip /SC45 45° Fixing Clip
21.5
21
19
19
/E2121 ‘U’ Channel /L1919 ‘L’ Channel
19
19
/L1919 ‘L’ Channelwith /SC45 45° Fixing Clip
4
3616
4
16.56.5
16 16
DIM
6.5 6.5
LD11
16
4
DIM
17 7
LD11/IP67 with PTFE single cores
4
16
17
DIM
7
LD11/IP67 with standard 2 core exterior cable
16
13
17
4
23.5
8
MinDIM
MinDIM
20
20
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
20
8
/SC - Flat fixing clip
(Dimensions in mm)
/LBM - ‘L’ bracket mounting. Comes with fixing clips attached.
16
11
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
MinDIM
13
17
4
26
8
IP54 / IP672 lengthswith noncable exitend butted up
IP54More than2 lengths
IP67More than2 lengths
20Min DIM
20Min DIM
40Min DIM
MinDIM
17
MinDIM
/SC Spring Clip
11
16
140°
DIM
6.5
6.5
16
4
LD11/IP54
Scaled Drawings.Use common elemtents, such as surfaces. But keep cables to scale.
21.5
21
/E2121 ‘U’ Channel
16
17
DIM
7
16
LD11/IP67
8 17
19
6
45°
/E1917 45° ‘P’ Channel
20
18
/LBM ‘L’ bracket mounting
/E1917 - Aluminium P channel angled at 45°. Ideal for shelf details. Silver anodised as standard. Comes with fixing clips attached.
/E2121 - U channel is supplied in white as standard, and with clips attached. It is useful for details where glare is an issue or in details that require the LD11 to be hidden.
/SC Spring Clip
11
16
140°
DIM
6.5
6.5
16
4
LD11/IP54
Scaled Drawings.Use common elemtents, such as surfaces. But keep cables to scale.
21.5
21
/E2121 ‘U’ Channel
16
17
DIM
7
16
LD11/IP67
8 17
19
6
45°
/E1917 45° ‘P’ Channel
20
18
/LBM ‘L’ bracket mounting
45°
1:1 Scale forCAD Download
Template for Scaling70%
9
15
11
16 14.5
14.5
LD11 /SC Fixing Clip /SC45 45° Fixing Clip
21.5
21
19
19
/E2121 ‘U’ Channel /L1919 ‘L’ Channel
19
19
/L1919 ‘L’ Channelwith /SC45 45° Fixing Clip
4
3616
4
16.56.5
16 16
DIM
6.5 6.5
LD11
16
4
DIM
17 7
LD11/IP67 with PTFE single cores
4
16
17
DIM
7
LD11/IP67 with standard 2 core exterior cable
16
13
17
4
23.5
8
MinDIM
MinDIM
20
20
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
20
8
45°
1:1 Scale forCAD Download
Template for Scaling70%
9
15
11
16 14.5
14.5
LD11 /SC Fixing Clip /SC45 45° Fixing Clip
21.5
21
19
19
/E2121 ‘U’ Channel /L1919 ‘L’ Channel
19
19
/L1919 ‘L’ Channelwith /SC45 45° Fixing Clip
4
3616
4
16.56.5
16 16
DIM
6.5 6.5
LD11
16
4
DIM
17 7
LD11/IP67 with PTFE single cores
4
16
17
DIM
7
LD11/IP67 with standard 2 core exterior cable
16
13
17
4
23.5
8
MinDIM
MinDIM
20
20
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
20
8
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
MinDIM
13
17
4
26
8
IP54 / IP672 lengthswith noncable exitend butted up
IP54More than2 lengths
IP67More than2 lengths
20Min DIM
20Min DIM
40Min DIM
MinDIM
17
MinDIM
17 45°
19
21
21.5
16
6
18
20
T +44 (0)1322 527 629 E [email protected] www.lightgraphix.co.uk
LightGraphix reserve the right to change specifications without noticeData sheet issued: 1 June 2016
Data sheet - Page 4
LED output options SuffixEco /EcoShort /ShortRGB Eco /RGB Eco
IP optionsIP54 (standard) /IP54IP67 rated for wet environments /IP67
Fixing optionsFixing clip (3 fixing clips per metre) /SCL bracket mounting /LBM45 degree P channel /E1917U channel /E2121
LD11Miniature Low Profile 24V Linear LED
Order Codes and Options
LED colour optionsExtra Warm White (2700K) /LW27Warm White (3000K) /LW30Cool White (4000K Eco) /LW40Cool White (5000K Short) /LW50
To be used with 24V constant voltage LED Drivers and ControllersWe offer a range of drivers with 1-10V, DMX, and DALI dimming options. Please download the data sheet from the downloads section at www.lightgraphix.co.uk, or contact us for more information
Product code
LED LEDcolour
LD11
Fixingoption
Length
Example: LD11 / Eco / LW30 / SC / IP54 / 2000mm
IP rating- When more than 2 lengths of the IP67 version are needed then a 40mm gap is needed between the LD11 and the lit surface
45°
1:1 Sca
le fo
rC
AD
Do
wn
loa
dTe
mp
late
for
Sca
ling
70
%
9
15
11
16 14.5
14.5
LD11
/SC Fixing C
lip/SC
45 45° Fixing Clip
21.5
21
19
19
/E2121 ‘U’ C
hannel/L1919 ‘L’ C
hannel
19
19 /L1919 ‘L’ Channel
with /SC
45 45° Fixing Clip
4 3616 4
16.56.5
1616
DIM
6.5 6.5
LD11
16
4
DIM
17 7
LD11/IP67 w
ith PTFE
single cores
4
16
17
DIM
7
LD11/IP67 w
ith standard 2 core exterior cable
16
13
174
23.58
Min
DIM
Min
DIM
20 20
Min
DIM
Recom
mended m
ounting details when using m
ultiple lengths toensure a continuous w
ash of light.
20 20
8
45°
1:1 Scale forCAD Download
Template for Scaling70%
9
15
11
16 14.5
14.5
LD11 /SC Fixing Clip /SC45 45° Fixing Clip
21.5
21
19
19
/E2121 ‘U’ Channel /L1919 ‘L’ Channel
19
19
/L1919 ‘L’ Channelwith /SC45 45° Fixing Clip
4
3616
4
16.56.5
16 16
DIM
6.5 6.5
LD11
16
4
DIM
17 7
LD11/IP67 with PTFE single cores
4
16
17
DIM
7
LD11/IP67 with standard 2 core exterior cable
16
13
17
4
23.5
8
MinDIM
MinDIM
20
20
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
20
8
6
24
More than 8m runs (IP67 version)
Only the IP54 version in a single colour is available with multiple linked lengths. The IP67 version can have 1 link only. RGB lengths are not available with links
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
MinDIM
MinDIM
20
20
MinDIM
13
17
4
23.5
6
IP54/IP672 lengthswith noncable exitend butted up
IP54More than2 lengths
IP67More than2 lengths
20Min DIM
20Min DIM
40Min DIM
/SC Spring Clip
45°
14.5
14.5
/SC45 45° Spring Clip
17
DIM
7
16
LD11/IP67
11
16
140°
MinDIMMin 40
We recommend the distances shown below when mounting multiple lengths end to end to ensure a continuous wash of light on the lit surface.
45°
1:1 Scale forCAD Download
Template for Scaling70%
9
15
11
16 14.5
14.5
LD11 /SC Fixing Clip /SC45 45° Fixing Clip
21.5
21
19
19
/E2121 ‘U’ Channel /L1919 ‘L’ Channel
19
19
/L1919 ‘L’ Channelwith /SC45 45° Fixing Clip
4
3616
4
16.56.5
16 16
DIM
6.5 6.5
LD11
16
4
DIM
17 7
LD11/IP67 with PTFE single cores
4
16
17
DIM
7
LD11/IP67 with standard 2 core exterior cable
16
13
17
4
23.5
8
MinDIM
MinDIM
20
20
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
20
8
17
4
45°
1:1 Scale forCAD Download
Template for Scaling70%
9
15
11
16 14.5
14.5
LD11 /SC Fixing Clip /SC45 45° Fixing Clip
21.5
21
19
19
/E2121 ‘U’ Channel /L1919 ‘L’ Channel
19
19
/L1919 ‘L’ Channelwith /SC45 45° Fixing Clip
4
3616
4
16.56.5
16 16
DIM
6.5 6.5
LD11
16
4
DIM
17 7
LD11/IP67 with PTFE single cores
4
16
17
DIM
7
LD11/IP67 with standard 2 core exterior cable
16
13
17
4
23.5
8
MinDIM
MinDIM
20
20
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
20
8
13- By butting up the two non cable feed ends of 2 x 4m lengths you can guarantee little or no break in the wash. LD11 should be installed 20mm from the lit surface, and applies for both the IP54 and IP67 versions
45°
1:1 Scale forCAD Download
Template for Scaling70%
9
15
11
16 14.5
14.5
LD11 /SC Fixing Clip /SC45 45° Fixing Clip
21.5
21
19
19
/E2121 ‘U’ Channel /L1919 ‘L’ Channel
19
19
/L1919 ‘L’ Channelwith /SC45 45° Fixing Clip
4
3616
4
16.56.5
16 16
DIM
6.5 6.5
LD11
16
4
DIM
17 7
LD11/IP67 with PTFE single cores
4
16
17
DIM
7
LD11/IP67 with standard 2 core exterior cable
16
13
17
4
23.5
8
MinDIM
MinDIM
20
20
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
20
8
45°
1:1 Scale forCAD Download
Template for Scaling70%
9
15
11
16 14.5
14.5
LD11 /SC Fixing Clip /SC45 45° Fixing Clip
21.5
21
19
19
/E2121 ‘U’ Channel /L1919 ‘L’ Channel
19
19
/L1919 ‘L’ Channelwith /SC45 45° Fixing Clip
4
3616
4
16.56.5
16 16
DIM
6.5 6.5
LD11
16
4
DIM
17 7
LD11/IP67 with PTFE single cores
4
16
17
DIM
7
LD11/IP67 with standard 2 core exterior cable
16
13
17
4
23.5
8
MinDIM
MinDIM
20
20
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
20
8- When more than 2 lengths of the IP54 version are needed then a 20mm gap is needed between the LD11 and the lit surface
45°
1:1 Scale forCAD Download
Template for Scaling70%
9
15
11
16 14.5
14.5
LD11 /SC Fixing Clip /SC45 45° Fixing Clip
21.5
21
19
19
/E2121 ‘U’ Channel /L1919 ‘L’ Channel
19
19
/L1919 ‘L’ Channelwith /SC45 45° Fixing Clip
4
3616
4
16.56.5
16 16
DIM
6.5 6.5
LD11
16
4
DIM
17 7
LD11/IP67 with PTFE single cores
4
16
17
DIM
7
LD11/IP67 with standard 2 core exterior cable
16
13
17
4
23.5
8
MinDIM
MinDIM
20
20
MinDIM
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
20
20
8
Less than 8m runs (IP54 and IP67 versions)
More than 8m runs (IP54 version single colour)
IP54
IP67
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
MinDIM
MinDIM
20
20
MinDIM
13
17
4
23.5
6
IP54/IP672 lengthswith noncable exitend butted up
IP54More than2 lengths
IP67More than2 lengths
20Min DIM
20Min DIM
40Min DIM
/SC Spring Clip
45°
14.5
14.5
/SC45 45° Spring Clip
17
DIM
7
16
LD11/IP67
11
16
140°
MinDIMMin 20
Recommended mounting details when using multiple lengths toensure a continuous wash of light.
MinDIM
MinDIM
20
20
MinDIM
13
17
4
23.5
6
IP54/IP672 lengthswith noncable exitend butted up
IP54More than2 lengths
IP67More than2 lengths
20Min DIM
20Min DIM
40Min DIM
/SC Spring Clip
45°
14.5
14.5
/SC45 45° Spring Clip
17
DIM
7
16
LD11/IP67
11
16
140°
MinDIMMin 20
Suggested mounting details
Linked lengths