Real-time videocapture devicefor DisplayPort 1.2

DisplayPort(DGR-1000)

Video Grabber

Video Grabber Real-time video capture device for DisplayPort 1.2

DisplayPort (DGR-1000)

* Integrated video splitter requires pin 20 of DisplayPort port for passive mode. It can be provided by the monitor or graphics card (or both).

Zjednoczenia 9 Street Grona Park Building, 2nd floor 65-120 Zielona Góra Poland

www.multisoftsa.com

Video interface DisplayPort 1.2 Network interface 2 x GbE, SNMPv3 Management Dimensions 168 x 168 x 54 [mm] Weight 0,9 kg Operating temp. 5°- 50° C DC adapter 12V 2A (with optional redundancy) Power consumption 12W

12V/1.5A DC

LAN1

Made in EU

LAN2

VIDEO OUPUT VIDEO INPUTPWR1

PWR2

Protocol | format support H.264 LLE BMP JPG JP2 PNG RTSP ● ● ○ ○ ○ ○

NFS ● ● ● ● ● ● SMB ● ● ● ● ● ● Broadcast ● ● ● ● ● ●

Connection schemes

Pass - through

ComputerMonitor

DGR-1000

DGR-1000 captures the signal between the computer and monitor

Monitor emulation

ComputerMonitor DGR-1000

Mirroredoutputs

DGR-1000 emulates the monitor and records mirrored video signal

Supported resolutions 320 x 240 1152 x 846 1400 x 1050 1920 x 1440 2560 x 2048 480 x 320 1176 x 664 1440 x 900 2048 x 1024 3072 x 1536 640 x 480 1200 x 960 1600 x 900 2048 x 1080 3072 x 1728 720 x 480 1280 x 720 1600 x 1024 2048 x 1152 3840 x 1600 720 x 576 1280 x 768 1600 x 1200 2048 x 1536 3840 x 2160 800 x 480 1280 x 800 1680 x 1050 2048 x 2048 800 x 600 1280 x 960 1768 x 992 2560 x 1080 1024 x 600 1280 x 1024 1920 x 1080 2560 x 1440 1024 x 768 1360 x 768 1920 x 1200 2560 x 1600

at least 500mA on

Video Grabber DisplayPort (DGR-1000) is a real-time video capturing device thatworks using the DisplayPort 1.2 interface.Equipped with a passive video splitter it can be safely installed between the computer and its screen (pass-throughconnection) as it doesn’t even have to be powered on to forward the video signalto the display*.

Configured either using web browser or via SNMPv3 DGR-1000 provides wide variety of possibilities: both lossless and lossy compression algorithms are available, captured signal can be provided as RTSP stream or saved at a user-defined network location. Support for Network Time Protocol (NTP) makes it possible to timestamp the data at the moment of its capture.

Designed for the Air Traffic Control, DGR-1000 provides an option for power and network redundancy. In cases where absolutely no interference in the recorded signal is allowed DGR-1000 can even emulate a specific monitor and record a mirrored video signal thus ensuring that the link between video source and the display remains untouched.